Equinox® II - O-Two Systems International, Inc.
Contents
1. eee 2160 LPM Demand FlowTriggering Pressure 100 LPM lt 5 cmH O Input Pressure estet 2a 50 PSI 10 Operating Storage Temp seesesss 35 F to 125 F 37 C to 51 C Input Connection eese 5 8 DISS Patient CONNECTOL ooococcoccnccnconccnncnncnnonccnonocoons 15 22 mm Weight 5 eot epp ote ebd orbe eU eee bite 8 oz 226 8 grams 4 4 Equinox IT REGULATOR 4 1 SPECIFICATION Pressure Regulator Classification Diaphragm type with upstream valving mechanism Dimensions 137 mm X 63 5 mm X 177 mm Weight 960 gm Maximum Rated Inlet Pressure 2200 psig 15169 kPa Output Pressure at Zero Flow 50 psig 345 kPa 10 Contents Gauge Range 0 4000 pisg 0 26000 kPa Inlet Fitting CGA 965 D I S S yoke Outlet Fitting 5 8 Male D LS S 4 2 MAINTENANCE Pressure regulators and their auxiliary components should be checked at least every six months and more frequently in high use applications O Two Medical equipment is not designed for field disassembly and service Even pressure gauges on some regulator models are specifically matched to each individual regulator s functional characteristics and thus cannot simply be replaced NOTE Outlet fittings and components must be moved from one regulator port to another The full 2000 psi pressure of the gas cylinder may be transmitted directly to inappropriate equipment with disastrous consequences Any units requiring modif2. A SIGNIFICANT LEAK AS THIS MAY SEVERELY DETRACT FROM ITS FUNCTION RETURN THE UNIT IMMEDIATELY TO THE MANUFACTURER OR AN AUTHORIZED O TWO MEDICAL DEALER Confirm that the regulator gauge reads FULL Check for proper function of all components residual gas in the system using the Equinex II Demand Valve Bleed Pin and return equipment to storage neatly 10 13 SAFETY PRECAUTIONS The O Two Medical Equinox II Demand Valve is intended for use by suitably trained and qualified personnel The following precautions should always be observed CAUTION FEDERAL LAW RESTRICTS THIS DEVICE TO SALE BY OR ON THE ORDER OF A PHYSICIAN WHEN THE UNIT IS IN USE DO NOT SMOKE OR USE NEAR OPEN FLAME EITHER DURING USE OR WHEN CHANGING THE CYLINDER WHEN NOT IN USE ALWAYS TURN OFF THE CYLINDER NEVER ALLOW OIL OR GREASE TO COME INTO CONTACT WITH ANY PART OF THE CYLINDER REGULATOR OR DEMAND VALVE DO NOT DISASSEMBLE ANY PART OF THE DEMAND VALVE EXCEPT WHERE DESCRIBED IN THIS MANUAL AS ANY UNAUTHORIZED DISASSEMBLY WILL INVALIDATE THE WARRANTY AFTER USE ALWAYS ENSURE THAT ALL COMPONENTS ARE CLEANED IN ACCORDANCE WITH THE INSTRUCTIONS PROVIDED IN THIS MANUAL ALWAYS USE THE CHECK LIST TO ENSURE THAT ALL COMPONENTS ARE REASSEMBLED CORRECTLY AND READY FOR USE AFTER USE ALWAYS ENSURE THAT A FULL GAS CYLINDER IS ATTACHED BEFORE RETURNING THE UNIT TO ITS NORMAL STORAGE POSITION 3 14 PERFORMANCE SPECIFICATION Demand Flow Rate
3. by the facility using the device 3 SERVICING 3 1 ROUTINE MAINTENANCE WARNING The O Two Medical E4uinee II Demand Valve is designed to provide years of reliable service in all emergency situations Failure to follow the maintenance and inspection routines properly could result in incorrect operation of the demand valve To ensure proper operation of the demand valve regular inspection and checking of the demand valve and accessories for correct function should be undertaken by a responsible member of staff on a regular basis This check is to ensure that all of the accessories and demand valve components are present the gas mixture cylinder is full and that the demand valve is in working order MAINTENANCE Resuscitation parameters should be checked at least every six months and more frequently in high use applications Units with test pressures outside of the ranges listed in the product specifications should not be used O Two Medical products are not designed for field disassembly or service outside that indicated in this manual Any malfunctioning units should be returned to the manufacturer or an Authorized O Two Medical Technologies Dealer Unauthorized repairs will nullify the product warranty
4. MANUFACTURERS AND DISTRIBUTORS OF CPR Bio Barrier Face Shields Universal Pocket Ventilators Rescue Breather CPR Protective Barriers Demand Valve Resuscitators CAREvent Range of Automatic Transport Ventilators Oxygen Demand amp BVM Oxygen Supply Refill Valves SQ Unibody Regulators EasyGrip Bag Valve Mask Resuscitators Burn Relief Burn Kits and Dressings Genesis II IDLH Rescue Resuscitators Equinox 50 Nitrous Oxide 50 Oxygen Administration Systems Your Representative is O TWO MEDICAL TECHNOLOGIES INC Innovation in Resuscitation u CE ozo ES 7575 Kimbel Street od Mississauga Ontario Canada L5S 1C8 Tel 905 677 9410 Fax 905 677 2035 Website www otwo com E Mail resuscitation otwo com For your nearest Authorized O Two Medical Tech Distributor In North America Toll Free 1 800 387 3405 O Two Tw MEDICAL TECHNOLOGIES INC Equinox II NITROUS OXIDE OXYGEN ADMINISTRATION EQUIPMENT 01EQ7000E USER MANUAL Made in Canada by O Two Medical Technologies Inc Part Number 17MP1342 Rev C Oct 2008 5 O TWO MEDICAL Eguinor II DEMAND VALVE CHAPTER TITLE PAGE REPLACEMENT PARTS i BNVROBDUCEHON 1 1 Eguinoz II Demand Valve 2 01BM2302 1 Patient Valve Swivel Housing Assembly 1 2 Warranty Information 2 17MP1528 Silicone Diaphragm 1 3 Safety Precautions 3 02FM4999 Universal Oronasal Resuscitation Mask bs Performance Specification l 01EQ7001E Eguinor IT Demand Valve wit
5. d is turned Off clockwise and any remaining gas bled out of the regulator Loosen the T bar on the regulator yoke by turning counter clockwise Lift the regulator off the cylinder post valve Remove the used washer located in the yoke adapter and replace with a new one usually supplied with each freshly filled cylinder Ensure that the new cylinder is labeled 50 Nitrous Oxide 50 Oxygen Entonox Crack the new cylinder by quickly turning the cylinder on and then off This ensures that the post valve is clean of any foreign material Place the regulator on the full cylinder s post valve ensuring that the guiding pin and inlet port on the regulator line up with the corresponding holes on the cylinder post and that the cylinder washer is in place NOTE Small medical gas cylinders are protected from inadvertent interchange by a Pin Index Safety System Guiding pins will only allow Entonox regulators to be used on Entonox cylinders Should your regulator not fit a cylinder which supposedly contains Entonox do not lubricate force or remove the guiding pin to make it fit Instead return the cylinder to the supplier immediately Tighten the T bar until very snug Slowly turn the cylinder ON counter clockwise at least one full turn If a leak around the cylinder post is noted first further tighten the yoke T bar If this does not correct the leak washer replacement may be required DO NOT PLACE ANY REGULATOR INTO SERVICE WITH
6. h 7 Hose 2 OPERATING PROCEDURE 2 1 Demand Breathing 5 Equinox d Ar Regulitor 2 2 Operating Instructions 2 17MP7000 Scavenger Adapter 2 3 Scavenger PEEP Adapter 6 01EQ7006 Eguinor IT Demand Valve 3 SERVICING Bleed Pin with Chain 3 1 Routine Maintenance 7 17MP1329 Equinox II T Replacement Hose with 32 Cleaning the Egwinox II Demand Valve 8 Fittings 4 Eguinor II Regulator 4 1 Specification 9 CONTACT YOUR NEAREST O TWO MEDICAL 42 Maintense 9 AUTHORIZED DISTRIBUTOR FOR A COMPLETE CATALOGUE ON ALL O TWO MEDICAL 4 3 To Replace a Depleted Cylinder 10 MANUFACTURED PRODUCTS 4 4 Cleaning and Sterilization 11 5 Replacement Parts 12 1 12 TABLE OF CONTENTS 1 INTRODUCTION 1 1 nox IT DEMAND VALVE O Two Medical Technologies Equinex II Demand Valve provides trained individuals with a safe and effective means of providing analgesia pain relief by inhalation O Two Medical Equinox IT Demand Valves are lightweight portable and extremely durable Designed for the demands of the pre hospital and in hospital environment they can be operated anywhere 50 Nitrous Oxide 50 Oxygen mixture cylinders are available Note Only those individuals trained in the administration of Nitrous Oxide Oxygen mixtures should use this equipment Thoroughly review the instruction manual before use 1 2 WARRANTY WARRANTY O Two equipment is manufactured from the finest quality materials Each individual part is subject to strict quality cont
7. ications or determined as malfunctioning should be returned to the manufacturer or an authorized O Two Medical Dealer Unauthorized repairs will nullify the product warranty 3 2 CLEANING THE Equinox IT DEMAND VALVE Routine cleaning of the O Two Medical Equinoe IT Demand Valve should be undertaken to maintain the equipment in a clean condition Sterilize face mask patient valve and diaphragm which are used for equipment coming into contact with partients using most common disinfecting solutions such as CIDEX or 10 bleach solution Rinse thoroughly with water after sterilization All other components should be cleaned with a mild soap solution WARNING Do not attempt to clean and sterilize any components that are designated as disposable as immersion of these items into a sterilizing solution can cause degeneration of the materials CLEANING PROCEDURE The E4uinex II Demand Valve must be thoroughly cleaned after each patient use 1 Ensure that the cylinder is turned off completely clockwise and any remaining gas bled out of the regulator 2 Remove the facemask from the Equinox II Demand Valve and then disconnect the demand valve from the regulator This is accomplished by counter clockwise turning of the connection nut at the regulator end of the hose A wrench may be required 3 Unscrew patient valve from the unit body being careful to ensure that the diaphragm is retained 4 Wash all components thoroughly i
8. is her face with a light pressure and breath normally The sound of gas flowing should be heard with each inspiration If not adjust the patient s hold on the mask for a better seal and ask the patient to breath more deeply 7 Continue administration as per local management protocol 8 Ensure that the cylinder is turned OFF after each use and remaining gas released from the system by simply loosening the regulator demand valve connection until gas flow ceases Always retighten the connection after bleeding the surplus pressure Alternatively place the bleed pin attached to the regulator into the centre on top of the Equinox II Demand Valve and depress until gas floe ceases 2 3 SCAVENGING OF WASTE NITROUS OXIDE OXYGEN MIXTURE USING THE SCAVENGER ADAPTER The dual purpose O Two medical Scavenger PEEP Adapter is designed to replace the Equinox IT Scavenger Mask with a simpler more user friendly method of scavenging exhaled air from the patient during inhalation analgesia The Scavenger Adapter provides a secure fit by simply pushing the Scavenger adapter over the 15 22 mm Patient Valve Swivel Housing on the Equinox IT Demand Valve The 19 mm exhalation port meets the requirements of the International Standards for Conical Connectors for Low Pressure Medical Gas Systems and will allow the attachment of corrugated tubing so that the patient s exhaled breath can be scavenged from the exhalation valve to the exhaust method chosen
9. n a mild soap solution and disinfect as required 5 The handpiece can be wiped over with a soft cloth and mild soap solution 6 Dry all components thoroughly 7 Re assemble and check performance 2 OPERATING PROCEDURE 2 1 DEMAND BREATHING The O Two Medical Equinox IT Demand Valve is a device powered by the 50 psi output gas from the pressure regulator Its function is to provide gas to the patient at a safe delivery pressure and adequate flow rate upon demand An inspiratory effort by the patient will open the demand valve and oxygen nitrous oxide will flow to the patient at a rate and volume in line with their inspiratory effort 2 2 OPERATING INSTRUCTIONS 1 Ensure that the Equinox IT Demand Valve Regulator connection is snug 2 Turn the cylinder handwheel counter clockwise to the ON position at least one full turn 3 Ensure that the regulator contents gauge reads greater than 500 psi If not replace with a full cylinder 4 Attach the Universal facemask to the Equinox II Demand Valve outlet 5 Instruct the patient in its operation Most protocols insist that the gas be self administered by the patient to prevent inadvertent excessive administration by an attendant 6 To trigger the demand valve and obtain an adequate flow of gas it is necessary to make a good mask to face seal Simply place the mask on the patient s face covering both the nose and mouth Instruct the patient to hold the mask on h
10. rol tests to ensure exceptionally high standards The manufacturer warrants to the purchaser of DEMAND VALVE RESUSCITATOR that its component parts are free from defects in material and workmanship for a period of two years from the date of purchase The manufacturer will replace and or repair all parts of the resuscitator at its option for two years from the date of purchase at no cost to the purchaser upon the notification of the defects in writing by the purchaser All shipping costs shall be borne by the purchaser The manufacturer shall be liable under this warranty only if the resuscitator and its parts have not been used and serviced in the normal manner described in the instruction manual There are no other expressed or implied warranties This warranty gives no specific legal rights You may also have other rights which may vary according to local regulations 2 4 4 CLEANING AND STERILIZATION Pressure Regulators Simply wipe down regulator parts after use with a commercial disinfectant antimicrobial agent Do not immerse regulator in fluid or subject to autoclaving If further sterilization is required due to infectious disease a cold Ethylene Oxide gas sterilizing cycle may be used Oil grease or hydrocarbon based sealants must be used on this equipment 11 4 3 TO REPLACE A DEPLETED CYLINDER 9o 9 10 11 Ensure that the cylinder is turned OFF after each use bleed off the Ensure that the cylinder to be change
Download Pdf Manuals
Related Search