Home

TZHEF04 Embedded DVR User Manual

1. and gt Keys Keys Menu mode use gt select 4 V to edit PTZ direction control Playback speed control Menu confirmation Select v or x to enable or disable Pause playback Digital Video Network Surveillance System 3 2 IR remote control Fig 3 2 Elevation of IR remote control Table 3 2 Instruction of IR remote control Pe e enaa leg S leg SSS Unisight Digital Technologies Inc 10 Digital Video Network Surveillance System Security Anywhere I 12 Direction Keys Same as direction keys and enter key ENTER of front panel Same as ESC key of front panel s renee Placing the batteries into the IR remote control 1 Remove the battery cover 2 Insert the battery Please make sure that the poles and are correctly placed 3 Fold the battery cover Start to use IR remote control Switch the device power on wait without any operations until preview screen appears and then you can use IR remote control to manage DVR on condition that the device ID is default 255 which can be changed in Display menu If the default device ID has been changed please press Power amp DEV key of IR remote control input the present device ID and then press ENTER key Then you can use IR remote control to operate this DVR Stop using IR remote control When DVR controlled by IR remote control press DEV key again then the IR remote control can not control t
2. PTZ Control Play Manual Record Close Status and Aux Chan 1 4ch 2 PTZ interface Double click the left key Move to the center of the screen For SAE YAAN protocol Drag the left key Select an area to zoom in For SAE YAAN protocol Single click the left key If you select an area for zooming in this action which will save the poison as No 60 and zoom in the area For SAE YAAN protocol Scroll wheel forward Switch to previous channel Scroll wheel backward Switch to the next channel Note Using the mouse can only call the first 96 of the 128 presets 3 Channel name or OSD position configure interface Drag the left key A rectangle frame will be following with the cursor Single click the right key Pop up menu including Confirm Cancel and Style for OSD only 73 Digital Video Network Surveillance System Securiy Anywhere gf 4 Area configure interface Right click Pop up menu including Confirm Cancel Clear and Full this option only appear in motion detect area configuration Drag the left key Extend or shrink area Moving The primary grid will be following with the cursor 5 Test input interface Click the left key 1 Pop up soft keyboard 2 Input text 3 Save and exit Click the right key Cancel the text and exit the edition Scroll wheel forward or backward Cursor goes to the previous or next character 6 Playlist interface Click the left key Select the file to copy or cancel S
3. Press Confirm button to save the cruise point into the sequence After you finish setup the sequence number press StartSeq to check the current sequence Press Stop button to stop checking You can delete cruise points in one sequence After you finish sequence setup press Return button back to PTZ menu In PTZ menu press Confirm button to save the modification Please make sure the PTZ you are using can support sequence function Cruise setup 64 D l l UNISIGHT Digital Video Network Surveillance System NISIGM T In PTZ menu press Setup button on the right side of Cruise item you can enter Cruise setup menu Shown as Fig 5 34 below Fig 5 34 Cruise setup Press Rec Cru button you will enter PTZ control interface You can start controlling PTZ with direction keys press ENTER to save the operation track and return Cruise setup menu Press StartCru button to repeat the PTZ track until you press Stop button Press Return button back to PTZ menu In PTZ menu press Confirm button to save this cruise Please make sure the PTZ you are using can support cruise function 65 Digital Video Network Surveillance System ee A Chapter6 Utilities There are many tools in Utilities menu Including Default Parameters Firmware Hard Disk Alarm Out Reboot Power Off
4. Step 2 Alarm type This is sensor type You can select Normal Open or Normal Close according to the sensor type Step 3 Enter Alarm in Handling sub menu In the Alarms menu there are two options for Alarm Handling item One is Ignore and the other is Handle If you select Handle option you can active Policy and PTZ Linkage buttons on right side Move Active Frame to Policy button and press ENTER key you will enter Alarm in Handling sub menu Shown as Fig 5 24 below 54 Digital Video Network Surveillance System Senn Zeie Le Fig 5 24 Alarm in handling setup Step 4 Alarm trigger record channel setup You can select channels to record for each alarm input In the sub menu you can use ENTER or EDIT key to enable record channel x means disable and e means enable Note In order to trigger the channel to record in Recording menu you must enable recording and select record type as Alarm or other related type Please refer to chapter 5 12 Step 5 Schedule for alarm handle method When there is external alarm happened in the schedule DVR will response according to the handle methods Step 6 Alarm handle method You can select one or more handle method On Screen Warning Audible 99 66 Warning Upload to Center and Trigger Alarm Output Note If On Screen Warning is enabled when there is ex
5. KSC Unisight Digital Technologies Inc 17 Digital Video Network Surveillance System Fig 4 2 Alarm status Table 4 2 Camera alarm status Status Description Motion amp External alarm 8 ae uann Zc na O ronn Press numeric keys to switch individual camera preview in SHIFT mode For example you can press 2 key to preview 2 camera Press EDIT key to manual cycle preview You can set the auto preview mode in Preview menu referring to 5 11 Press PREV key to switch multi screens preview 4 3 Video Spot Output Make sure that the numeric button is in function mode the status lamp is off Press shift Unisight Digital Technologies Inc 18 Digital Video Network Surveillance System NISIGHT button to switch numeric button between numeric mode and function mode Step1 Connect Video out 2 with monitor by a cable Step2 Press 3 to enter the spot out mode Step3 Press shift to enter the numeric mode Step4 Press 1 to 4 button to switch video spot output from channel 1 to channel 4 Note make sure that there is video signal input otherwise spot out will be only shown as blue screen 4 4 User name and Password Note When DVR is delivered from factory there is only one default administrator named admin and password is 12345 The administrator s name can not be modified while the password can be modified The administrator can create 15 users and
6. Press Confirm button to save current camera parameters and return main menu Step 7 Save all cameras If you want to setup other cameras please repeat from step2 to step 6 In Camera menu press Confirm key to save all cameras parameters Press Cancel button or ESC key to abort 5 10 Motion Detection If you enable this function when there is motion being detected DVR will display alarm in the status bar on the screen 45 SS LINISIGHT Digital Video Network Surveillance System Security anuhe ow Step 1 Enter Camera menu Step 2 Select camera Use Tab V key to select one camera after pressing edit key Step 3 Select motion detection sensitivity On the right side of Motion Det Level item there is a list box That 1s motion detection sensitivity There are 7 options from 0 the lowest to 5 the highest and Off You can use fT keys to select one If you select Off option DVR will not response even if there is motion detection If you select other options itll active Motion Area Setup button and Policy Setup button If you select low sensitivity such as 0 DVR will response only when there is great motion detected On the other side for high sensitivity such as 5 DVR will response with small motion detection Step 4 Motion area setup You must define motion areas so that DVR will response when there is motion in those areas Move Active Frame to
7. Privacy Mask item you can press Enter or edit key to change the flag into y and active Area button Move Active Frame to Area button on the right side of mask check box press ENTER key to enter mask area setup interface Shown as Fig 5 14 below Fig 5 14 Mask area setup Step 4 Setup mask area In the mask area setup interface there is one small Unisight Digital Technologies Inc 41 LINISIGHT Digital Video Network Surveillance System a m d yellow pane on the upper left side For PAL camera the whole screen is divided into 22 18 panes 22 15 for NTSC you can use f lt keys to move the yellow pane to your hope position and press EDIT key the yellow pane will be turned into red then you can use T keys to extend the red pane and lt key to shrink the red pane This red area is the mask area After the red mask area selected press EDIT key to save the mask area The maximum mask area size is 8 8 panes and the minimum size is only one pane You can setup 4 mask areas at most After you finish setup press ENTER key to return Advanced settings menu You can press A key to clear all mask areas Step 5 Save mask area You can repeat step2 step3 and step4 to setup mask area for other cameras In Advanced setting menu press Confirm button to save the mask area press Cancel button to abort Here is the example for mask area function Sh
8. View Log and System Information Enter Utilities menu Shown as Fig 6 1 below Fig 6 1 Utilities 6 1 Restore Parameters Restore factory parameters for DVR The IP address gateway and port number will not be restored Shown as Fig 6 2 below 66 Digital Video Network Surveillance System Sech Zar T Fig 6 2 Restore parameters 6 2 Upgrade You can use this function to upgrade the firmware Please confirm the language is matched Press Upgrade icon in the pop up dialog you can select either FTP or USB upgrade mode Shown as Fig 6 3 below Fig 6 3 Upgrade If you select FTP mode you will enter FTP Upgrade menu 67 Digital Video Network Surveillance System NI ae Fig 6 4 FTP IP setup Please Input the ftp server IP and press ENTER key DVR will connect with FTP server through network and download the firmware file If you select USB mode please make sure you connect one USB flash memory with DVR and the firmware file is in its root directory Reboot after successfully upgrading the system will use the new firmware 6 3 Hard Disk Management Fig 6 5 Hard Disk setup 68 Digital Video Network Surveillance System Securiy az I Check HDD work status Capacity Free space Stand by or not Normal status or not Format HDD Before formatting stop all recording After formatting you must reboot DVR otherwise DVR will not work normally 6
9. 4 Stop Alarm Out Clear the alarm output manually 6 5 Reboot Reboot DVR 6 6 Power off Shut down DVR 6 7 View Log To view the log recorded in DVR HDD In Utilities menu press View Log to enter Log menu Shown as Fig 6 6 below Fig 6 6 View log 69 oo LINISIGHT Digital Video Network Surveillance System Security Anywhere I If you want to view the log based on default option just press ENTER key DVR will list all matched information Also you can select options to search By Type By Date and By Type amp Date By Type View log information by the assigned type Type is divided into Major type and Minor type Major type includes operation alarm exception and all For operation major type there are many minor types including Power On Shut Down Abnormal Shut Panel Login Panel Logout Panel Config Panel File Play Panel Time Play Local Start Record Local Stop Record Panel PTZ Panel Preview Panel Set Time Local Upgrade Net Login Net Logout Net Start Record Net Stop Record Net Start Transparent Channel Net Stop Transparent Channel Net Get Parameter Net Config Net get Status Net Alert On Net Alert Off Net Reboot BiComStart Start Voice Talk BiComStop Stop Voice Talk Net Upgrade Net File Play Net Time Play Net PTZ For alarm major type the minor type includes External Alarm In External Alarm Out Motion Detect Start Motion Detect Stop View Tamper
10. DVR is directly connected with client end PC 77 Digital Video Network Surveillance System 1 white orange white orange 2 orange orange 3 white green white green 4 blue blue 5 white blue white blue 6 green green 7 white brown white brown 8 brown brown The corresponding relationship of cross cable 78 Digital Video Network Surveillance System Security Anywhere I Appendix D Troubleshooting Failure Possible reasons After plugging in power turning on the power switch 1 Power cable is broken POWER light in front Panel does not turn on and fan 2 Power supply is broken does not work After plugging in power turning on the power switch 1 Front panel cable is broken POWER light in front panel turn to green while fan does 2 Fan is broken not work After plugging in power turning on switch POWER The ATX plug in main board is not light turn to green the indicator lights in the panel turn on well plugged in at the same time but fan does not work DVR continuously reboots after starting up every 10 Upgrade the wrong firmware seconds Compression board has problems Main board has problems There are no images in the monitor connected with VOUT The cable connected with the after DVR is started monitor is broken Real board of DVR has problems Main board of DVR has problems Cannot find the hard disk in reboot process Hard disk cable is br
11. define their rights Login Login dialog as shown Fig 4 3 below Fig 4 3 Login dialog Use 4 V keys to select one user press gt key to enter Password edit box input corresponding password press ENTER key to exit edit box The Active Frame will move to Confirm button You can press ENTER key to enter main menu If there is no response it means the user name and password are not matched After three error times DVR will enter the preview mode Digital Video Network Surveillance System ee A Modify password For those users created by admin they can modify their passwords as follows Step1 Enter main menu Press MENU key in the login dialog select your user name input the correct password you can enter the main menu As shown below Fig 4 4 Input passwords Fig 4 5 Main menu Step 2 Select the target user name by using fT then move the Active Frame to Password icon by using lt keys As shown in Fig 4 6 below 20 Digital Video Network Surveillance System Security Anywhere I Fig 4 6 Modify user s password Step 3 Input new password Use numeric keys to input new password The password can be null It also can be 16 numerals Press ENTER to exit edit box and move to Verify item to verify password Note In edit box use gt to move cursor and EDIT key to delete the numeral in front of the cursor Step 4 Modify password succe
12. is modified you must reboot the device to make the parameters become effective 5 9 Video Loss Alarm When the video cable or camera has something wrong the video image is lost If you enable video loss alarm in such case DVR will display alarm in the status bar on the screen Step 1 Enter Camera menu Step 2 Select camera Use M V keys to select one camera Step 3 Enter Advanced settings interface Move Active Frame to the handle method box on the right side of Signal Loss item use A key to select Handle option and move Active Frame to the Policy button on right side Press ENTER to enter Signal Loss interface Shown as Fig 5 17 below 44 Digital Video Network Surveillance System Senn Zeie Le Fig 5 17 Video signal loss handle setup Step 4 Setup alarm schedule You can setup working schedule Only when the video loss is happened in the schedule DVR will response Note The 4 time periods can not be repeated Please reboot DVR to make parameters become effective Step 5 Setup alarm policy You can select one or more response solutions including On Screen Warning Audible Warning Upload to Center and Trigger Alarm Output You can use fT and EDIT key to enable or disable them x is disable and v is enable Step 6 Save alarm setup After your setup press Confirm button and return Advanced setting interface
13. name can not be changed while the password can be modified Password modification Press MENU key in the login dialog select the username as admin use key move cursor to password edit box input 12345 press Confirm to enter the administrator menu Fig 5 1 Enter user menu Move Active Frame to User icon press ENTER key to enter User 30 Digital Video Network Surveillance System NISIGHT Management menu Shown as Fig 5 2 below Fig 5 2 User management In the user name list box only admin is existed You can use key move Active Frame to password edit box and press EDIT key to enter edit status Press numeric keys to input the new password The password is only combined by 16 numerals at most After finishing inputting password you can press ENTER key to exit Move Active Frame to Verify password edit box input the verify password Move Active Frame to Confirm button and press ENTER if password and verify password are the same the password will be saved and taken into effective If password and verify password are not same a warning message box will be appeared Shown as Fig 5 3 below Fig 5 3 Error In this case press ENTER to return password edit box and input new password again 31 Digital Video Network Surveillance System NISIGHT 5 2 Add and Delete User Enter User Management interface Add user The st
14. preview layout Step 1 Enter Preview menu In the main menu move Active Frame to Display icon and press ENTER then go to Preview Setup and press ENTER you can enter preview menu Shown as Fig 5 20 below Fig 5 20 Setup preview mode Step 2 Preview properties Preview mode For preview mode item you can use lT key to select one mode If DVR has only 1 channel you can select only 1 Screen option If DVR has 4 channels there are 1 Screen and 4 Screen options If DVR has more than 4 but less than 9 channels there are 1 Screen 4 Screen and 9 Screen options If DVR has 16 channels there are 1 Screen 4 Screen 9 Screen 12 Screen and 16 Screen options Switch time That is screen preview switch time You can use fT keys to select switch time There are many options including 5 Seconds 10 Seconds 20 Seconds 30 Seconds 1 Minutes 2 Minutes S Minutes and Never If you select Never the preview screen will not be switched automatically For example for 16 channels DVR if you select 4 Screen preview mode and 20 Seconds switch time DVR will cycle display 4 channels screen every 20 seconds Audio preview If you enable audio preview v when you preview single camera DVR will play the audio of that channel Preview layout setup There is a square frame d
15. such as On Screen Warning Audible Warning Upload to Center and Trigger Alarm Output Note If On Screen Warning is enabled when there is motion alarm happened and DYR is in preview mode DVR will switch to the related camera If you trigger more than one camera DVR will pop up them one by one every 10 seconds When the motion alarm is disappeared DVR will restore preview mode Step 9 Save motion alarm setup Press Confirm button to return Image Setup menu In the Image Setup menu press Confirm button to save the current camera parameters Step 10 Save all cameras You can repeat from step2 to step8 to setup motion detection parameters for other cameras Also you can copy the parameters of one camera to any other cameras Note Motion alarm area can not be copied If you want to disable motion alarm area and motion alarm policy you just need to select the motion alarm sensitivity as Off 5 11 Preview After the device started the preview screen will be seen then you can press PREV key to switch between one screen and four screens also you can switch to the other single screen by pressing EDIT or in SHIFT mode you can press numeric keys to switch to the screen no you want In Preview menu you can setup preview mode screen switch time enable or 48 Digital Video Network Surveillance System Security Anywhere ag disable audio preview and
16. 5 16 View tampering handle setup Step 6 Alarm schedule setup When there is view tampering alarm happened DVR will handle the alarm based on the schedule You can set 4 periods for each day one week Also you can copy the schedule of one day to other days 43 _ 9 UNISIGHT Digital Video Network Surveillance System ad Note Time periods can not be repeated Please reboot DVR to make the parameters become effective Step 7 Setup alarm policy If there is view tampering alarm happened in schedule DVR will response based on the policy You can select one or more solution including On Screen Warning Audible Warning Upload to Center and Trigger Alarm Output You can use T and EDIT key to enable or disable them x is disable and v is enable Step 8 Save alarm setup After your setup press Confirm button and return Image Setup interface In Image Setup menu press Confirm button to save current camera parameters and return main menu Step 9 Save all cameras If you want to setup other cameras please repeat from step2 to step 8 In Image Setup menu press Confirm key to save all cameras parameters Press Cancel button or ESC key to abort Select OT option for View Tampering you can delete the view tampering area Note Only one view tampering area can be setup for each camera The view tampering area can not be copied If the schedule
17. Area button on the right side of sensitivity list box press ENTER key you can enter Motion Area Setup interface Show as Fig 5 18 below Fig 5 18 Motion area setup The whole screen is divided into 22 18 panes NTSC 22 15 There is one yellow panel on the upper left side The motion area setup steps are the same as that of mask area setup refer to chapter 5 7 The only differences are that you can use PTZ key to set the whole screen as motion area and multi motion areas can be defined Press A key to clear all motion areas Setup multi areas After you setup one motion area press EDIT key the yellow pane will appear again and then you can setup another motion area Unisight Digital Technologies Inc 46 UNISIGHT Digital Video Network Surveillance System uy ee a Clear part of motion area Move the yellow pane to the start clear position of motion area press EDIT you will find the yellow pane is turned into black pane You can use key to enlarge or shrink the blue area Press EDIT key to clear this part motion area Press Enter key to save and return Image menu Press ESC to cancel Clear all motion areas Press A key to clear all motion areas of this channel The keys used to setup motion areas are following tM II Il Move yellow panel to any position EDIT Yellow panel and red panel switch key Right enlarge red pane Left shrink red pane Down enlar
18. CU DennarDome etc Other PTZ protocols will be added with the new firmware Note In DVR PTZ menu if you select Pelco P protocol when you setup PTZ address please plus or minus one compared with Camera ID For example if camera ID is 2 the DVR PTZ address is set as ID 3 Preset setup Preset is using one number to represent the camera s position zoom focus and iris Move Active Frame to Setup button on the right side of Preset item press ENTER key to enter preset setup menu You can save 128 preset 62 Digital Video Network Surveillance System Sech Ser T numbers Please make sure the PTZ support preset function before you setup preset Sequence setup Each sequence is made up of several cruise points Each cruise point includes one preset number dwell time and dwell speed Please make sure the PTZ you are using can support sequence function before you start to setup You can save 16 sequences Cruise setup Cruise is remembering the track of PTZ movement Please make sure the PTZ you are using can support cruise function Preset setup In PTZ menu move Active Frame to Setup button on the right side of Preset item press ENTER you can enter Preset setup menu Shown as Fig 5 32 below Fig 5 32 PTZ preset setup Add preset number You can input preset number among 1 128 in the edit box Then press Adjust button to enter PTZ control interface In PTZ contro
19. Device ID 36 Digital Video Network Surveillance System Securty Aryanee Fig 5 9 Display menu When using IR remote control to operate DVR you must use device ID to select DVR The default device ID of DVR is 88 If there are more than one DVR in one place please define different device ID for each DVR Otherwise the IR remote control will control all DVR with the same device ID at the same time In Display menu move Active Frame to the device ID edit box in the edit status you can use numeric keys to input new device ID The device ID value is ranged between 1 255 After you finish the modification press Confirm button to save and take effect or press Cancel to abort modification 5 4 Video Output Standard Video output standard There is one VOUT BNC connector at the rear panel of DVR It is used to connect with analog monitor and can support PAL or NTSC video output You can modify video output standard to match video input In Display menu There is a list box named Video Standard you can use V key to select PAL or NTSC video output Press Confirm button to save or Cancel to abort 37 Digital Video Network Surveillance System atone 5 5 Camera name and OSD Setup Camera Name In Camera menu you can define name for each camera Please notice that camera s name can not be copied Shown as Fig 5 10 below Fig 5 10 Input camera number The ste
20. E 32 3 Uni Name and Dovice ID epror E A 35 5 4 Video Output Standard 37 2 2 Camera name and OSD SGU EE 38 5 8 View Tampar me Alai eege 42 5 10 Motion DetectiON sisisi irea e r e iie r ane ETA aani 45 A E L csp te secs E A E E 48 A ROE E 50 5 13 External Alarm Input and Relay Output 53 de NOVO og ee 59 De KE 6l Nr r E 66 6 1 Restore E EE 66 SN l UNISIGHT Digital Video Network Surveillance System Wen 6 2 Eege 67 6 3 SEKR EE Te A 68 6 4 EE E ee 69 6 5 IRC DOO sas cauntcnecneant anes anknctnsn sen E O E N bee wauanzashaoaromeeonnantiones 69 6 6 TPO EE 69 6 7 EE 69 6 8 System Information etekdeegeeedteg ekteekteeeddreged e dEeedgege e deed ege ege sehr 71 Appendix A Mouse Control Function REENEN 73 Appendix BHDD Capacity Calculation EE 76 Appendix C DVR Connect Cable Definition sss sss sees eee eee eee eee 77 Appendix D Troubleshooting isccecscezcecscecocecaiecsseincadicuusdiodecssiseateaaacedasadacbagdautecedsuaceoseasecssenngemecaseoseceteesons 79 Digital Video Network Surveillance System NISIGHT Chapterl Product Introduction 1 1 Overview TZHEF04 series network digital video recorder is an excellent digital surveillance product It uses the embedded MCU and Linux combining the most advanced technology in the information industry such as video and audio encoding decoding hard disk recording and TCP IP The firmware is burned into the flash making it more stable and reliable TZHEF04 series device has the features of both
21. P as DNS IP The DNS server with that fixed Internet IP can receive DVR information and used to resolve DVR dynamic IP This IP server is special software not the normal domain name server You can use the provided SDK to develop this DNS software Multicast IP It is one D class IP address among 224 0 0 0 239 255 255 255 If you do not use multicast function you do not need to set Some routers will prohibit multicast function in case of network storm Remote Host IP and Port If you set this IP and port when there is an alarm and exception happened DVR will send information to that host IP The center with this IP can receive alarm and exception information from DVR You can use SDK to develop this center software PPPoE DVR support PPPoE dial up function As Fig 5 30 shown below 60 Digital Video Network Surveillance System eT Fig 5 30 PPPoE setup Example Use PPPoE function Step 1 Enter Network gt Advanced Settings Step 2 Select NIC type Step 3 Input port number In the port edit box use numeric keys to input port number The port number must be more than 2000 Step 4 Input IP Server Input one fixed Internet IP address where the IP analyst software IP Server is run Step 5 Enter PPPoE Setup amp Input PPPoE parameters Use ENTER or EDIT key to enable PPPoE function set PPPoE flag as V Input PPPoE username password and verify password that ISP provided Step 6 Save paramet
22. PreRecord MaxPreRecord is to save all data in PreRecord buffer The PreRecord time is related with bit rate The lower bit rate the longer PreRecord time 1s If the bit rate Max bit rate is very low and you select PreRecord Time as 5 Seconds maybe the actual prerecord time is more than 5 seconds On the other side if the bit rate is high and set PreRecord Time as 30 Seconds the actual prerecord time maybe is less than 30 seconds PostRecord Time When external alarm or motion alarm is stopped DVR will continue recording time The options are 5 Seconds default 10 Seconds 30 Seconds Minute 2 Minutes 5 Minutes and 10 Minutes Enable Rec Enable or disable selected camera record function x means disable and e means enable Schedule When you enable recording function you can setup recording schedule Note When the camera recording schedule is modified you must reboot DVR to make it become effective All day recording setup Step 1 Enter recording schedule menu In recording menu use ENTER or EDIT key to enable record function Ce flag press Schedule button to enter recording schedule menu 51 Digital Video Network Surveillance System Securiy Anywhere ie T E we g Ke E kad 5 22 Recording schedule setup Step 2 Select one day and enable all day recording option For Day item there are options Monday Tuesday Wednesday Thursday Friday Saturda
23. Start and View Tamper Stop For exception major type the minor type includes Video Signal Loss Illegal Access Hard Disk Error Hard Disk Full IP Conflict and DCD Lost For example The steps of viewing alarm log Step 1 For Query item select By Type to active Major Type and Minor Type items Step 2 For Major Type option select Alarm option For Minor Type option select one of following options All External Alarm In External Alarm Out Motion Detect Start Motion Detect Stop View Tamper Start and View Tamper Stop Step 3 Move Active Frame to Search Log button press ENTER key to start searching Step 4 When searching 1s finished DVR will list all matched alarm information In the list box the information includes Index Occur Time Major Type Minor Type Panel User Net User Host Address Parameters Type Channel No HDD No Alarm In and Alarm Out You can press More Info button for more information also select page number to view more information 70 Digital Video Network Surveillance System NISIGHT Step 5 Press Return button back to Utilities menu By Time View the log of one period Step 1 Select By Time for Query option to active Start Time and Stop Time items Step 2 Input start time and stop time Step 3 Move Active Frame to Search Log button and press ENTER key to start searching S
24. Supply Input Unisight Digital Technologies Inc 7 Digital Video Network Surveillance System Chapter3 Operating Instructions 3 1 Front Panel Introduction Fig 3 1 Front panel introduction Table 3 1 Items on front panel JL Lamp Rreceives S Power Green means DVR is working Extinguish means DVR is powered off STATUS Green means in SHIFT mode Tx Rx Bright means DVR is accessed by IE or Client Software Twinkle means DVR is operating through IE or Client Software koe Input number lower case upper case character and symbols Keys Switch preview mode to menu Brush control short key WIPER Function ZOOM in PTZ control Keys ZOOM in PTZ control Cancel and back to the menu 1 In edit state delete the current cursor character 2 IRIS in PTZ control 3 Select v or x to enable or disable 1 Local playback Unisight Digital Technologies Inc 8 Digital Video Network Surveillance System Security anywhere I 2 AUTO in PTZ control 1 Manual record 2 SHOT in PTZ control adjust preset 1 Enter PTZ control mode 2 IRIS in PTZ control 1 Multiple screens preview 2 Switch the menu to preview mode FOCUS in PTZ control 1 Input number lower case upper case and symbol switch 2 FOCUS in PTZ control 3 In preview mode display or hide the channel status bar Switch between numeric keys and function keys 4 Control Direction Composed of WN V
25. TZHEFO4 Embedded DVR User Manual Digital Video Network Surveillance System Unisight Digital Technologies Inc Digital Video Network Surveillance System Smee TZHEF04 series Net DVR User Manual V2 0 Thank you for purchasing Unisight Embedded DVR This manual applies to TZHEF04 Series Net DVR Please read it carefully for the better use of the product The contents in this manual are subject to change without notice Unisight assumes no responsibility for inaccuracies or omissions and specifically disclaims any losses or risks incurred as a consequence directly or indirectly of the use of any of the contents of this manual Further information can be found on the following website www unisight net CS l l LINISIGHT Digital Video Network Surveillance System a Index Chapter Product Mimo GC Te TT 5 1 1 E E 5 1 2 JE I E E E A E AE E A A ASAE 5 Chamo sillai om EE H 2 1 Checking the DVR and Its Accessories sese 7 Se E S BE ee TT 7 3 1 Front Ponet a ON e 8 3 2 Uire mo T T 10 3 3 eebe 12 3 3 1 ER 12 eege 3 3 2 Monu ee seserian hana aanaeio anac 13 3 4 eer Oe GE 15 Chapter Basic Operation GUE serruperanirn inaen or A Eaa aiae 16 4 1 EE 16 4 2 O EE R E 16 SET R RET TT see a TTT 4 3 Vidco SOE E 18 4 4 User name and RE 19 4 5 PE COD O oe A E E 21 4 6 Manua RECON ME 23 4 7 Ee TT 24 4 8 Backup Recorded E E 28 4 9 1 CG yy DVR eege 29 ChapterS Parameters Setup Guide 30 5 1 Administrator and PASS Word E 30 J2 STET BR e BE
26. ao ae There are 24 symbols in all They are divided into 4 pages and you can press 0 key to turn over pages Unisight Digital Technologies Inc 15 Digital Video Network Surveillance System Security Anywhere ag Chapter4 Basic Operation Guide 4 1 Power on Note Please make sure that the power supply matches DVR and AC adapter is connected correctly Before switching DVR on please connect one monitor through VOUT or VGA interface Otherwise you can not see graphic user interface and operate the device If POWER lamp is off please follow the steps below Step1 Connect power supply correctly Step2 Switch on the power button on the rear panel When DVR is started POWER lamp is green If the HDD is not installed or detected the information No Disk A x will be seen in the lower right corner of the preview screen 4 2 Preview DVR will enter the preview mode after started On preview screen you can see date time and camera icon Set system date and time in Camera Date OSD menu please refer to 5 5 Change camera name in Camera menu please refer to 5 5 On the screen you will see record and alarm status of each camera Shown as Fig 4 1 below these two kinds of status will alternate automatically Press A key to display or hide the camera status bar Digital Video Network Surveillance System Fig 4 1 Recording Status Table 4 1 Camera record Status 0 ml mm KSE KSC KSE
27. are the setup steps Step 1 Enter Camera select a camera then enter Color setup menu Shown as Fig 5 13 below Fig 5 13 Color setup Step 2 Select camera Please use M V keys to select one camera Step 3 Adjust brightness contrast saturation and hue Move Active Frame to 40 Digital Video Network Surveillance System the Adjust button on the right side of Brightness Contrast Saturation and Hue press ENTER key you will enter the corresponding adjust interface In the adjust interface there is one scroll bar at the bottom you can use WV keys to adjust and can find the video image will be changed at the same time When you are satisfied with the real time video image press ENTER to return Color menu Step 4 You can copy the video parameters of current camera to any other cameras Or you can repeat setp2 and step3 to adjust for any other camera After adjusting in Image Setup menu press Confirm button to save parameters and make them become effective Otherwise press Cancel button or ESC key to abort modification 5 7 Mask Area Setup In some cases maybe you want to mask the sensitive area This area will not be previewed and recorded The mask area setup steps are following Step 1 Enter Camera menu Step 2 Select one camera You can use A V keys to select one camera Step 3 Enter Advanced settings enable the check box beside
28. ay speed Click this button to pause mengt Click this button to be mute click it again to recover the sound on on Click this button to start copy the segment click it again to Stop Kaes Click this button to hide the control bar right click your mouse and select display then the control bar will turn up again mo Click this button will trigger a rectangle area on the screen draw the rectangle with left key of your mouse 27 Stfg 9 UNISIGHT Digital Video Network Surveillance System ad pressed and move to the area you want to zoom in then double click left key to zoom in that place Click left key again to return to the playback interface Click these buttons to switch to next or previous playback channels It is useless if you only record one channel at that time 4 8 Backup Recorded Files Note The user must have Playback right Please connect the backup devices before you start to backup In the playback interface you can backup the recorded files In the preview mode press PLAY key in the login dialog select username and input the correct password you can enter the playback interface In the menu mode just press PLAY key you can enter the playback interface directly Backup intraday recorded files In the playback interface move Active Frame to Backup Today button press ENTER key all intraday recorded files of all channels will be backup to the sto
29. croll wheel forward Select the previous file Scroll wheel backward Select the next file Signal click the right key Cancel and return back to the preview interface Double click the left key Play the selected file 7 User interface Double click the left key Enter the selected user s privileges setting interface Single click the right key 74 Digital Video Network Surveillance System Cancel the operations you did and back to previous interface Scroll wheel forward Select previous user Scroll wheel backward Select next user Unisight Digital Technologies Inc 75 Digital Video Network Surveillance System NISIGHT Appendix B HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording video recording type and video file storage time Step 1 According to Formula 1 to calculate storage capacity d that is the capacity of each channel needed for every hour unit Mbyte q d 8x3600 1024 1 In the formula d means the bit rate unit Kbit s Step 2 After video time requirement is confirmed according to Formula 2 to calculate the storage capacity which is storage of each channel needed unit Mbyte DI q xh x D 2 In the formula h means the recording time for each day hour D means number of days for which the video shall be kept Step 3 According to Formula 3 to calculate total capacity accumulation 4r that is needed for all channels in t
30. digital video recorder DVR and digital video server DVS It can be used as a standalone device but also to build a powerful surveillance network which is widely used in the fields of banking telecommunications transportation sectors manufacturing warehouse irrigation etc 1 2 Features Compression H 264 video compression algorithm and each channel can be CIF real time PAL 25FPS NTSC 30FPS and 4CIF DCIF 2CIF can be selected as well Support multi area motion detection Support Privacy Mask Support view tampering alarm Support video signal loss alarm Support changeable OSD position support LOGO Support both variable bit rate and frame rate Support dual stream and the sub stream can support CIF QCIF resolution Storage One SATA interface and the HDD can support up to 2000GB memory HDD S M A R T technology Support FAT32 file system Support multiple record modes schedule record motion detection record external alarm record motion amp alarm record motion or alarm record manual record Support cycle and none cycle record mode Digital Video Network Surveillance System Sech Zar T Support USB flash disk USB hard disk and USB CD RW DVD RW to backup Preview amp Playback Support one composite video output and one spot video output TZHEF04 can support one VGA output with 1204 768 resolution Support VGA and VOUT output VGA has precedence over VOUT and can not output at the same time Supp
31. ect a channel Rec Type Use 7 or to select recorded files type The file type options have All All Time Motion Detect Alarm and Manual Time Section You can define the search time section Move Active Frame to the time edit box use numeric keys to input the detail time Search Search the matched recorded files and display them in the list box If there is not matched file a corresponding dialog box will be pop up Play by Time Playback the recorded stream directly based on the time section Select Page In the file list box each page will only display 8 files If the matched files are more than 8 you can select page to list other files 500 pages 4000 files can be searched in one time You can use numeric keys or f keys to select page File List Box List the matched files File started time file size are displayed in the list box You can use 7 keys to move the scroll bar to select file Backup Devices You can select USB flash USB HDD to backup the files or clips Copy Start to backup 25 Digital Video Network Surveillance System Backup Today Backup all recorded files of today Operation when playback 200 708 107 0018 ME Fri 1 eg e v Fig 4 10 Playback interface At the bottom of image there is an information bar and the following information is included Volume Play Progress Play Speed Played Time and File Total Time Display Hide infor
32. ee numeric keys DVR will adjust the corresponding preset number Repeat pressing REC SHOT key and press the preset number DVR will adjust that preset number When you exit PTZ control mode the camera will stay at the current position Unisight Digital Technologies Inc 22 o LINISIGHT Digital Video Network Surveillance System TT age Note The PTZ preset number has been set already Please refer to PTZ menu for preset setup V2 0 firmware can support 128 preset at most Start Stop auto function in PTZ control mode In PTZ control mode press PLAY AUTO key to start PTZ auto function Press PLAY AUTO key again to stop When PTZ is in auto mode if you exit PTZ control mode PTZ will continue auto function unless you enter the PTZ control mode again and press PLAY AUTO key to stop Exit PTZ control mode Press ESC or ENTER to exit and return to the preview mode 4 6 Manual Record Note The user must have the corresponding right DVR has HDD and HDD has been formatted already Manual record In preview mode press REC key in the pop up login dialog select the name and input the correct password you can enter the Manual Record interface In menu mode press REC key to enter the Manual Record interface directly 23 Digital Video Network Surveillance System Security Anywhere ag Fig 4 8 Manual record interface Description Manual record interface has follows parts channel numb
33. eps are following Step 1 Enter User Management menu as Fig 5 4 below Please refer to chapter 5 1 Fig 5 4 user management Step 2 Add new user name In the User Management menu move Active Frame to Add button and press ENTER in the pop up dialog input the new user name refer to chapter 3 4 press ENTER and return User Management menu Totally 15 users can be added Shown as Fig 5 5 below 32 Digital Video Network Surveillance System Senn Zeie Le Fig 5 5 Input user name Step 3 Setup the password for new user After you add one new user the password is null You can skip this step 1f you do not want to change the password In the users list box of User Management menu use M V keys to select the new user name then use gt key to the password edit box Press EDIT key to enter edit box use numeric keys to input the new password Step 3 Setup the rights for new user The new added user has not any operational rights You must setup rights for him In the users list box of User Management menu use M V keys to select the new user name then use gt key to Default Privileges button press ENTER the user will have the default rights The default rights include local playback remote playback and view log If you want to define the detail rights move Active Frame to Setup Privileges button and press ENTER to enter rights setup menu as follow
34. er channel status start stop record start all and stop all buttons Channel List the channel number DVR has Status Channel work status has 4 cases means idle Green means the channel is recording including real time recording alarm recording motion detection recording Red means network transmission Orange means both recording and network transmission Start Stop y means you can start corresponding channel recording x means you can stop recording Start All Press this button to start all channels recording Stop All Press this button to stop all channel recording Press ESC key to enter the preview mode Press MENU key to enter main menu Press PLAY key to enter the playback menu Press PTZ key to enter the PTZ control mode 4 7 Playback Note The user must have Playback right Playback interface In preview mode press PLAY key in the pop up login dialog select user name 24 igi LINISIGHT Digital Video Network Surveillance System Securiy Anywhere Le and input correct password you can enter the Playback interface In menu mode press PLAY key you can enter the Playback interface directly Shown as Fig 4 9 below The two screens play back function may be canceled so the second channel option may not display Fig 4 9 Playback interface Description Select a Channel Move the Active Frame to chan press edit button then use t or key to sel
35. ers In Network menu press Confirm to save parameters Reboot DVR to make parameters into effect In reboot process DVR will start dialup using PPPoE function If DVR dialup internet successfully DVR will display the dynamic internet IP address in Network menu 5 15 PTZ There is one RS 485 port at DVR rear panel used for PTZ control You can setup RS 485 parameters to match your PTZ protocol In main menu you can move 61 Digital Video Network Surveillance System Secunty Anywhere ef Active Frame to PTZ icon and press ENTER key you can enter PTZ menu as follows Shown as Fig 5 31 below A IW AA k ah oh r Fig 5 31 PTZ parameters setup PTZ menu description Select camera Select one PTZ camera RS 485 parameters Including baud rate data bit stop bit parity flow control etc These parameters must be the same as those PTZ protocols PTZ address Each PTZ has one different address PTZ type DVR had the following PTZ protocols YouLi LinLin 1016 LinLin 820 Pelco p DM DynaColor HD600 JC 4116 Pelco d WX Pelco D VCOM VC 2000 NetStreamer SAE YAAN Samsung Kalatel 312 CELOTEX TLPelco p TLHHX 2000 BBV RM110 KC3360S ACES ALSON INV3609HD Howell Tc Pelco P Tc Pelco D AUTO M AUTO H ANTEN CHANGLIN DeltaDome XYM 12 ADR8 amp 060 EVI D30 DEMO SPEED DM PELCO D ST832 LC D2104 HUNTER A01 TECHYIN WEIHAN LG D MAX Panasonic KTD 348 infinova PIH 7625 L
36. ge red pane t Up shrink red pane PTZ Set whole screen as motion area A Clear all motion areas ENTER Save and return Image Setup menu ESC Cancel setup and return Image Setup menu Step 5 Motion alarm policy Move Active Frame to the corresponding Policy button of motion detection alarm press ENTER key to enter Motion Alarm Handle menu Shown as Fig 5 19 below Fig 5 19 Motion alarm handle setup Step 6 Motion alarm record channel setup When there is motion alarm happened you can trigger related camera to start to record In Motion Alarm 47 i l UNISIGHT Digital Video Network Surveillance System Security Anywhere Le Handle menu you can select one or more record channels Please use ENTER or EDIT key to enable the flag into v Note In order to make the cameras start recording in Recording menu you must enable recording schedule and set Rec Type as Motion Detection or Motion Alarm Please refer to chapter 5 12 for recording setup Step 7 Motion alarm schedule When the motion alarm is happened in schedule DVR will response such as On Screen Warning Audible Warning Upload to Center and Trigger Alarm Output You can setup 4 time periods for one day and 7 days for one week Note Time periods in one day can not be repeated Step 8 Motion alarm handle method setup You can select one or more handle methods
37. he DVR during scheduled video recording dr ym 3 In the formula means total number of channels in one DVR Step 4 According to Formula 4 to calculate total capacity accumulation d that is needed for all channels in DVR during alarm video recording including motion detection dr DM xa 4 i l In the formula a means alarm occurrence rate 76 Digital Video Network Surveillance System Security Anywhere I Appendix C DVR Connect Cable Definition 1 RS 485 connect cable made method There are R R T and T on the RS 485 interface R R here are for receiving signals while T T here are for sending signals 2 UTP network connect cable made method Material and tool One twist cable 8 pin the length can be defined as to the actual demand but must be within 100m 2 standard RJ45 head one tool for RJ45 Suggestion have a network cable test tool to test each cable made Pin definition To make the network cable according to the actual situation there are two options 1 Use the following method to make the network cable when DVR is connected with network hub or switch 1 white orange white orange 1 2 Orange Orange 2 3 white green white green 3 d blues e blue d b white blue white bl ue S 6 green green S 7 Lhit ebron white brown 7 8 brown brown 8 The corresponding relationship of the direct cable 2 Use the following method to make the cross network cable when
38. his DVR Switch the DVR off When IR remote control 1s working press POWER key for several seconds then the power off prompt will pop up press Confirm and switch off the power on the rear panel manually When IR remote control can not work normally 6 Check batteries poles Check the remaining charge in the batteries 6 Check IR remote control sensor is masked 11 Digital Video Network Surveillance System Please change another IR remote control and try again If the problem still exists please contact administrator 3 3 Menu Description 3 3 1 Menu Items Table 3 3 First Glance at menu Menu Menu Name Function Function Name Di sp la y Device ID Require password Screen saver Video standard Enable scaler Camera Menu transparency Date Time Preview If HD Full Select camera Stream type Resolution Frame rate Network Bit rate Enable Rec PreRec time PostRec time Select Alarm In amp Alarm Type Alarm Handling amp policy amp PTZ PTZ linkage Alarm out amp time Exceptions Add Delete Password Verify Utilities Default Privileges Set Privileges Select camera Name Color Date OSD Motion Det Level Advanced Settings IP Port Mask Gateway Http Port Advanced Settings PPPoE Select Camera Baud Rate amp Data Bits Stop Bits amp Protocol PTZ Add amp Preset Sequence No amp Cruise Default parameters Firmware Hard Disk Alarm output Rebo
39. ig 5 28 network setup Network menu description IP address This IP address must not be conflict with other IP If there is DHCP server in network you can set the IP as 0 0 0 0 save and reboot DVR In reboot process DVR will search the DHCP server and get one dynamic IP address This item will display the dynamic IP address If DVR uses PPPoE function also DVR can dialup into internet and this item will display the dynamic internet IP address Port Network access port number must be greater than 2000 Mask This is sub net mask Gateway The gateway IP is used to communicate in different network segments Http Port The port is for IE browser The default value is 80 It can be modified Advanced settings Move Active frame to Advanced settings then press enter to enter the configure interface Shown as Fig 5 29 below 59 Digital Video Network Surveillance System Security Anywhere ag Fig 5 29 Advanced network setup Advanced setup descriptions Mac The physical address of the device which can not be written NIC type Default is 10M 100M Auto the other options are 10M Half Dup 10M Full Dup 100M Half Dup and 100M Full Dup IP server address If DVR uses PPPoE function and get one dynamic IP address If you set DNS IP with one fixed Internet IP DVR will send some information such as DVR name DVR serial number DVR current IP to that fixed IP address We call that fixed Internet I
40. ivided into many windows If you select 4 Screen preview mode this frame is divided into 4 windows Each window represents one camera You can move Active Frame among the windows There 1s one bar under the square to display the preview order of all cameras First select the biggest screen preview mode for example for 4 channel DVR 49 WW l l LINISIGHT Digital Video Network Surveillance System eee A select 4 Screen preview mode so that all windows are display in the square Secondly move Active Frame to one of these windows press numeric keys to input camera index The small window will display that camera number In this way you can change the display order If you press 0 then the corresponding window will not display live video After you define the camera preview order you can select preview mode to meet your demand Save setup Press Confirm button to save preview properties Press Cancel or ESC key to abort 5 12 Recording Setup In main menu there is an icon named Recording You can enter recording menu as follows oe AA r AA IW oh ah oh Fig 5 21 Recording channel configuration Recording menu description If HDD Full There are two options Overwrite and Stop recording If you select Overwrite option when all HDDs in DVR are full DVR will overwrite the earliest recorded files and continue recording If you select Stop reco
41. l interface you can use direction keys to adjust PTZ position and use IRIS IRIS FOCUS FOCUS ZOOM ZOOM keys to adjust iris focus and zoom After you finish adjusting press ENTER then press Save button to save the preset number You can repeat this step to setup other preset numbers After you setup all preset numbers press Return button to return PTZ menu In PTZ menu press Confirm button to save all parameters Delete preset number In Preset setup menu input one preset number press 63 Digital Video Network Surveillance System Security Anywhere ag Delete button you can delete this preset number After deleting press Return button to PTZ menu In PTZ menu press Confirm button to save all modification Please make sure the PTZ you are using can support preset function Sequence setup In PTZ menu press Setup button on the right side of Sequence No item you can enter Sequence setup menu Shown as Fig 5 33 below Fig 5 33 PTZ sequence setup In Sequence setup menu first input the sequence number The sequence is among 16 Each sequence is made up of cruise points and each cruise point includes preset number dwell time and dwell speed Dwell time is the time staying at that preset number Dwell speed 1s the speed that PTZ is moved to that preset number Press Add button to add one cruise point
42. l DVR alarm output Local Video Out Remote control DVR video output Com Control DVR RS 232 MAC address This MAC address is not the address of DVR but the address of the PC that accesses DVR If you setup this function only the PC with this MAC address can access this DVR At PC end in DOS prompt you can use ipconfig command to get the PC MAC address 6 bytes Delete user In User Management interface you can use A WV keys to select one user then use gt to move Active Frame to Del button press ENTER in the pop up confirmation dialog press Confirm button to delete the selected user and return Press Cancel or ESC to abort deleting Shown as Fig 5 7 below Fig 5 7 Delete user 5 3 Unit Name and Device ID Unit name 35 Digital Video Network Surveillance System Senn Zeie Le Enter Utilities gt System Info and Unit Name will be seen as Fig 5 8 below Fig 5 8 System Info There is an item named Unit Name The default unit name is Embedded Net DVR Move Active Frame to unit name edit box press EDIT key to enter edit status you can modify the unit name Please refer to chapter 3 4 about how to input characters You can press ENTER key to finish modification Select Confirm button and press ENTER you can save the new unit name and make it into effect Press Cancel button or ESC key to abort modification
43. mation bar MENU Open Close sound PLAY Adjust play progress lt Backward Forward The unit is Adjust play speed Normal speed is 1x Use 7 to increase play speed 2X 4X Use to decrease play speed 1 2X 1 4X 1 8X and single Pause Continue Press ENTER to pause continue playback If played frame by frame Press ENTER to play one frame Copy segment EDIT Stop copy EDIT Need a back up device to store the segment Exit ESC Note When DVR is busy if you select high play speed maybe there is difference from actual play speed Exit playback In playback interface press ESC key to enter the preview mode In playback interface press MENU key to enter main menu press REC key to enter the manual record and press PTZ key to enter the PTZ control mode Playback with mouse plugged Unisight Digital Technologies Inc 26 o LNISIGHT Digital Video Network Surveillance System Security Anywhere Le If you playback with a mouse plugged they interface will be a little different And you can acquire more functions to operate in the playback course which is shown as Fig 4 11 below k NO VIDEO bb Fig 4 11 Play back control bar There is an additional bar appears We call it control bar Control bar descriptions bel L You can click these buttons to skip backward or forward 3 each time 5 H LEE You can click these buttons to select the pl
44. menu Step 5 Copy one alarm output parameters to other alarm output In Alarms menu you can copy parameters of current alarm output to other alarm output Step 6 Save setup SEI Di UNISIGHT Digital Video Network Surveillance System LH A When you finish setup in Alarms menu press Confirm button to save all parameters Note If any schedule is modified you must reboot DVR to make it become effective Exceptions The exceptions can be handled at present include hard disk full hard disk error illegal access IP address conflict network failure and NTSC PAL differ Enter Exceptions menu Shown as Fig 5 27 below Fig 5 27 Exceptions setup Including the following handle methods Audible Warning Beeping Upload to Center Send exception information to center host PC Trigger Alarm Output trigger local relay output You can select more than one handle methods After you finish setup press Confirm button to save parameters Press Cancel button or ESC key to abort 58 Digital Video Network Surveillance System Laon A 5 14 Network Parameters If you want to use network to access DVR you must setup network parameters Note If any network parameter is modified you must save and reboot DVR to make it become effective In main menu move Active Frame to Network icon and press ENTER you can enter Network menu as follows Shown as Fig 5 28 below F
45. ns Only one of them can be selected After pressing EDIT you can use 7 and J to select one option For example on the right side of Select Camera there is a list box for you to select one camera SS Edit Box This is for you to input characters Press EDIT key to enter the edit status you can input text there a Press A key to select number upper case lower case or symbols b Use and lt keys to move cursor c Use EDIT key to delete the character in front of cursor d Press ENTER to save amp ESC to exit without saving 4 Button Trigger a special function or enter the next sub menu For example press Policy button to enter the sub menu Press Confirm to save parameters and return to main menu Press Cancel button to cancel and return to main menu The button in grey means it can be operated only after being enabled How to exit menu Press PREV key to exit menu and return to preview mode Digital Video Network Surveillance System 3 4 Input Text In the menu interface if in edit status for example in the camera name edit box at the bottom of screen the input status is appeared as follow Here it means you can press numeric keys to input digital number Press A key to change input ways You can select number Uppercase Lowercase or Symbol Uppercase BT T amin EE To ao se Lowercase MEEDE amn 2005 07 08 toso me Symbol MENA 2s S18 2008 07 08 ro
46. ods for one day and each time period can select different record type Input start time and stop time for each time period and select record type for each period The record type options are All Time Motion Detect Alarm Motion amp Alarm and Motion Alarm command Note The time periods in one day can not be repeated Step 4 Copy to other days You can repeat step2 and step3 to setup for other days Also you can copy the current day to other days Step 5 Save Press Confirm back to Recording menu Press Confirm again to save the parameters and return main menu Note 1 If record type is Motion Detect or other related types you must setup Motion Detection in order to trigger motion recording refer to chapter 5 10 2 If record type is Alarm or other related types you must setup Alarms in order to trigger alarm recording refer to chapter 5 13 3 The time periods are between 00 00 and 24 00 5 13 External Alarm Input and Relay Output For TZHEF04 series DVR there are 4 alarms in and 1 relay out In Alarms menu you can setup for each external alarm input In main menu move Active Frame to Alarms icon and press ENTER key to enter alarms menu Shown as Fig 5 23 below 53 Digital Video Network Surveillance System Secunty Anywhere ef 5 23 Alarms setup External alarm input setup Step 1 Select one alarm input Use 7 keys to select one alarm input
47. oken The power cable of hard disk is not connected Hard disk is broken DVR can not control PTZ through RS 485 port RS 485 cable is not connected correctly or broken PTZ parameters error RS 485 port of DVR is broken Client software can not view DVR live image Network is error Connect wrong DVR wrong IP port number username or password etc Old player SDK playm4 dll Note 1 Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specification 2 Ifthe circuit board is wet dust on circuit board can cause a short circuit The circuit board plug and socket housing fan and housing should be cleaned by brushing regularly 79
48. ort play forward backward pause frame by frame etc User defined preview layout Support one playback channel Network Support TCP UTP Multicast DHCP etc TZHEFO04 supports RTP Support ADSL PPPoE dialup function Remote parameters setup Remote download and playback the recorded files Remote upgrade the DVR firmware Remote PTZ control Support IE for network control Remote alarm DVR information acquisition Others Support network voice talk Support WATER MARK Support local and remote PTZ control Support multi level user management Support local and remote log searching function Automatically recovery from exceptions enables high reliable Provide SDK and demo source code for application development Digital Video Network Surveillance System Chapter2 Installation Warning Before you install the DVR please make sure that the power of DVR is switched off 2 1 Checking the DVR and Its Accessories When you get the product check that all the goods are included in your product package There is a list in the package If any of the goods is missing please contact your dealer 2 2 Rear Panel Description mom D 12 Fig 2 1 TZHEF04 Rear panel y Note Please refer to real product for different models TZHEF04 1 Video in 2 Video out 3 VGA Interface 4 Alarm Out 5 RS 485 T T1 R R 6 Power Switch 7 USB Interface 8 Audio In 9 Audio Out 10 Ethernet Interface 11 Alarm In 12 12V DC Power
49. ot Power off View log Digital Video Network Surveillance System Mai il Ble information 3 3 2 Menu Operation How to enter the menu mode Press MENU key to enter the DVR main menu Press PLAY short key to enter the playback menu Press REC short key to enter the manual record menu Press PTZ short key to enter the PTZ control interface Note You must input user name and password The default user name is admin and password is 12345 Main Menu Description The main menu interface is shown as Fig 3 3 below Fig 3 3 Main menu There is one small frame named Active Frame It can be moved from one item to another by using direction keys T When the Active Frame is located on one icon you can press ENTER key to enter the sub menu For example move the Active Frame to Camera icon press ENTER to enter the sub menu as follows Fig 3 4 below Digital Video Network Surveillance System Fig 3 4 Camera input adjustment Each menu contains different kinds of items There is a small rectangular frame named Active Frame which is pointing to the selected item This Active Frame can be moved by direction keys t lt There are several kinds of menu items as follows l Check Box Provides two options means enable and x means disable You can use ENTER or EDIT key to switch over 2 List Box Provide more than 2 optio
50. own as Fig 5 15 below Fig 5 15 Area masked Disable the mask check box means cancel the mask area 5 8 View Tampering Alarm If you enable this function when someone blocks the camera spitefully DVR will display warning alarm in the status bar on the screen Unisight Digital Technologies Inc 42 Digital Video Network Surveillance System Security Anywhere ag Step 1 Enter Camera menu Step 2 Select camera Please use A V keys to select one camera And enter Advanced Settings Step 3 Select sensitivity move active frame to sensitivity item right beside the View tampering item Press edit key then you can use 7 L keys to select the sensitivity for View Tampering item The sensitivity options are Low Normal and High Select one of them will active Area Setup and Policy configuration Step 4 View tampering area setup Move Active Frame to Area button press ENTER key to enter area setup interface The setup methods are same as that of mask area setup After setting the area press ENTER key to return Advanced settings menu You can press ESC key to abort Note Only one view tampering area can be setup and the size of the area can be full screen Step 5 View tampering alarm setup In Advanced settings menu move Active Frame to Policy button press ENTER key to enter View Tampering Handle menu Shown as Fig 5 16 below Fig
51. ps of camera name setup Step 1 Select one camera Step 2 Move Active Frame to camera name edit box press EDIT key to enter edit status you can input digital number uppercase and lowercase characters refer to Chapter 3 4 The camera name can support 32 characters Step 3 Press ENTER key to exit edit status Move Active Frame to Confirm button press ENTER to save the modification and you can see the new camera name Press Cancel button or ESC key to abort Camera Name Position If you do not want to display camera name just disable the check box beside camera name edit box The disable flag is x If you enable the check box you can setup the camera name position You can copy the position to any other camera The setup steps are Step 1 Enter Camera menu Step 2 Select one camera Step 3 Enable the check box on the right side of camera name then you move Active Frame to Position button press ENTER to enter camera name position setup interface as picture below in that interface you can use IIS lt keys to move camera name position When the position is fixed press ENTER and return 38 i LINISIGHT Digital Video Network Surveillance System kU ZA Camera menu and press Confirm button to save it In the Image Setup menu press Cancel button or ESC key you can abort the modification OSD is abbreviation of On Screen Display Fo
52. r our embedded DVRDVS it includes displaying system time and camera name OSD settings include System time time format time display position camera name camera name display position etc System Time In Display menu you can setup DVR system date and time Move your active frame to Date Time setup item and press enter Date Display Mode Move the active frame to Date Display Mode then press EDIT then use ft key to select OSD format There are following OSD formats MM DD YY MM DD YY YY MM DD YY MM DD Here YY means year MM means month DD means day You can also enable DST Daylight saving Time function here Shown as Fig 5 11 below Fig 5 11 Date time setup Date OSD Position In Camera menu you can adjust the position where you want Date to display move active frame to Position item on the right side of Date OSD item and press enter button Then you will see the picture below Use fT gt gt to adjust the position of date As Shown 39 Digital Video Network Surveillance System Securiy Anywhere Fig 5 12 Set Positions of Data amp Time 5 6 Video Parameters Setup For different camera and different background in order to get the best video image you need to adjust video parameters such as brightness saturation contrast and hue etc You can setup the camera individually and also you can copy the video parameters of one camera to any other cameras Here
53. rage device A pop up dialog will display the backup status If backup device is not connected correctly or DVR do not detect the backup device an exception dialog will pop up Please ask administrator for more information Backup the files that matched your requirement Step 1 Search the matched files In the playback interface select one channel and record type input the time section move Active Frame to Search button press ENTER key DVR will start to find and list the matched files Step 2 Select the files that you want to backup In the file list box use f or keys to move the scroll bar When the scroll bar stays at the file you want to backup press EDIT key to select it The symbol v is the selection tag You can use the same method to select other files you want to backup After finish you can follow the next step Shown as Fig 4 12 below 28 Digital Video Network Surveillance System NISIGHT Fig 4 12 Playback list Step 3 Select backup device Please confirm the backup device USB flash memory USB HDD and select the corresponding backup device Step 4 Start and finish backup Move Active Frame to Save button and press ENTER key to start backup When backup is started corresponding message box will pop up to indicate the process Backup video segment You can also backup the image segments when playback The steps are 1 Enter the interface of playback the files or pla
54. rding option when all HDDs are all full DVR will handle it as Hard Disk Full exception please refer to chapter 5 17 for exception menu Select Camera Here all channels are listed You can use f keys to select one 50 a LINISIGHT Digital Video Network Surveillance System Security Anywhere I Stream Type There are two options one is Audio amp Video stream and the other is Video stream only If you want to record video and audio please select Audio amp Video option otherwise you can select Video option to record only video For DS 8000HSI DVR there is only one Video option Note If you change this option please reboot DVR to make parameter become effective Resolution The higher resolution is the clearer the image is The resolution options from low to high are QCIF CIF 2CIF DCIF and 4CIF Note If you change this resolution option please reboot DVR to make it become effective Bit rate You can select bit rate size for fixed bit rate type It is the same as Max Bit Rate Frame Rate Frame per second Options are 25 PAL 30 NTSC 20 16 15 12 10 8 6 4 2 and 1 for low frame rates you can select low bit rate size PreRecord Time When you enable motion detection recording or external alarm recording you can define prerecord time The options are No PreRecord 5 Seconds default selection 10 Seconds 15 Seconds 20 Seconds 25 Seconds 30 Seconds and Max
55. s One external alarm input can trigger many cameras PTZ linkage Step 9 Copy the parameters to other external alarm input you can copy the parameters of current alarm input to other external input Step 10 Save setup In Alarms menu press Confirm button to save the parameters Press Cancel button or ESC key to abort 56 Digital Video Network Surveillance System Security Anywhere ag Alarm relay output setup Step 1 In Alarms menu use f keys to select one alarm output Step 2 Select delay time The delay time is when the alarm is disappeared the alarm output will continue output time The delay time options are 5 Seconds 10 Seconds 30 Seconds 1 Minute 2 Minutes 5 Minutes 10 Minutes and Manual Stop If you select Manual option the alarm output will not stop until you press Clear Alarm button in Utilities menu So the actual alarm output time 1s made up of alarm input time and this delay time Step 3 Enter alarm out schedule You can set the schedule to enable alarm output Move Active Frame to Schedule button on right side of Alarm Out Time item press ENTER key to enter the corresponding schedule menu Shown as Fig 5 26 below Fig 5 26 Alarm out schedule Step 4 Setup alarm out schedule Like other schedule setup you can set 4 time periods for one day and 7 days for one week When you finish setup press Confirm button to return Alarms
56. s Shown as Fig 5 6 33 Digital Video Network Surveillance System Security Anywhere ag Fig 5 6 Set user right Operational rights are divided into Local and Remote You can assign the necessary rights to the user Use E6 gt key to move Active Frame to the corresponding right items press ENTER or EDIT key to enable or disable the item v means assign the right to that user Step 4 Save the new user s password and rights In the User Management menu press Confirm button the user s password and rights will be saved and return main menu If you press Cancel button the configuration will be abandoned User rights description Local Local rights are for local operation such as the operation using front panel IR remote control and RS 485 interface PTZ control Locally control PTZ Record Manual start stop recording Set parameters Setup Locally setup the DVR parameters Log Locally view the log on DVR Utilities Locally upgrade firmware format HDD reboot DVR and shut down DVR etc Remote PTZ Control Remote control PTZ Record Remote manual start stop recording Set parameters Setup Remote setup the DVR parameters 34 Digital Video Network Surveillance System Sec Zeie Le Log Remote view the log on DVR Utilities Remote upgrade firmware format HDD reboot DVR and shut down DVR etc Talk Client talks with DVR Alarm Remote contro
57. ssfully Move the Active Frame to Confirm button press ENTER key If the password is modified successfully you will turn to the main menu Or an error dialog will pop up You can repeat step 3 to modify again 4 45 PTZ Control Note The user must have the PTZ control right PTZ control interface In menu mode press PTZ key you can enter the PTZ control interface directly In preview mode press PTZ key in the login dialog select one user name and input the correct password you can enter PTZ control interface As shown in Fig 4 7 below 21 Digital Video Network Surveillance System S ggf K 02 2008 BAH 9 14 ma dr d Fig 4 7 PTZ Control interface The position where current camera name displays can be user defined Select channel In PTZ control mode you can press numeric keys under SHIFT mode to select channel For example you can press 2 key to select the 2 camera PTZ After you select the camera PTZ you can use the control keys to control PTZ PTZ control keys description Direction control keys 7 J gt ZOOM control keys ZOOM ZOOM FOCUS control keys FOCUS FOCUS IRIS control keys IRIS IRIS Adjust preset keys REC SHOT Auto control key PLAY AUTO Wiper control key MENU WIPER Light control key F1 LIGHT Adjust preset description In PTZ control mode press REC SHOT key and press the preset number thr
58. tep 4 After finish searching DVR will list the matched log information Step 5 Press Return button back to Utilities menu By Type amp Date View one kind of log in the assigned time period Step 1 Select By Type amp Time for Query option to active Major Type Minor Type Start Time and Stop Time items Step 2 Select Operation for major type and select one option for minor type Step 3 Input start time and stop time Step 4 Move Active Frame to Search Log button and press ENTER key to start searching Step 5 After finish searching DVR will list the matched log information Step 6 Press Return button back to Utilities menu 6 8 System Information Press System Info icon in Utilities menu you can get DVR system 71 Digital Video Network Surveillance System information Shown as Fig 6 7 below Fig 6 7 System information 72 Digital Video Network Surveillance System NISIGHT Appendix A Mouse Control Function 1 Preview interface Double click the left key 1 Switch to the channel where the arrow at when viewing single picture 2 Back to previous multi pictures when double click again Scroll wheel forward Switch to previous screen Scroll wheel backward Switch to the next screen Single click the right key Pop up function menu including Main Menu Single 1 4ch Multi Preview 4 Screen Next Preview
59. ternal alarm happened and DVR is in preview mode DVR will pop up the related camera If you trigger more than one camera DVR will pop up them one by one every 10 seconds When the external alarm is disappeared DVR will restore preview mode Step 7 Save setup 39 WW LUNISIGHT Digital Video Network Surveillance System Security Anywhere I In Alarm in Handling sub menu press Confirm button and return Alarms menu In Alarms menu press Confirm button to save the parameters Step 8 PTZ Linkage Move Active Frame to PTZ Linkage button press ENTER key to enter PTZ Linkage setup menu Shown as Fig 5 25 below Fig 5 25 PTZ linkage setup First select one camera and then select one of following PTZ linkages Preset Set the flag as v to enable preset in the preset number edit box and input one preset number that has been setup already Please refer to chapter 5 15 for preset setup Sequence Set the flag as vi to enable sequence and input one sequence number that has been setup already Please refer to chapter 5 15 for sequence setup Cruise Set the flag as v to enable cruise Please refer to chapter 5 15 for cruise setup Press Confirm button to save and return Alarms menu Press Cancel button or ESC key to abort and return Alarms menu Note Please make sure that the PTZ you are using can support preset sequence and cruise function
60. y and Sunday Use fT keys to select one day Move Active Frame to the check box on the right side of All Day item press ENTER or EDIT key to enable All Day option x means disable and e means enable Step 3 Record type For Rec Type item the options are All Time Motion Detect Alarm Motion Alarm and Motion amp Alarm command For all day record mode only one record type can be selected Step 4 Copy to other days You can repeat step2 and step3 to setup for other days Also you can copy the current day to other days Step 5 Save Press Confirm back to Recording menu Press Confirm again to save the parameters and return main menu Part time recording setup Step 1 Enter recording schedule menu 52 i l UNISIGHT Digital Video Network Surveillance System Security Anywhere Le In recording menu use ENTER or EDIT key to enable record function Ce flag press Schedule button to enter recording schedule menu Step 2 Select one day and disable all day recording option For Day item there are options Monday Tuesday Wednesday Thursday Friday Saturday and Sunday Use fT J keys to select one day Move Active Frame to the check box on the right side of All Day item press ENTER or EDIT key to disable All Day option x means disable and v means enable Step 3 Setup time period and record type There are 4 time peri
61. yback by time 2 Press EDIT key to start selecting the current playback image and press EDIT again to stop selecting This segment is selected 3 You can repeat step 2 to select many segments 30 segments can be selected in all 4 After you select all segments press ESC key a message window will pop up If you press Confirm button DVR will start to backup the selected segments If you press Cancel button DVR will abort backup Playback the video segment You can use our file player software to playback the video segment in PC You can find the player software in attached CD Exit playback interface Please refer to chapter 4 6 4 9 Shut down DVR Note You can only turn off the power directly 29 Digital Video Network Surveillance System Security Anywhere ag Chapter5 Parameters Setup Guide Only the users who have Parameters Setup right need to read this chapter When the following parameters are modified and saved you must reboot the DVR to make the new parameters become effective Others do not need to reboot the device Any network parameters resolution and record schedule External alarm sensor type View tampering alarm schedule Video loss alarm schedule Motion detection alarm schedule External alarm schedule Alarm output schedule 5 1 Administrator and Password When DVR is left from factory there is one default administrator The name is admin and password is 12345 The

TZHEF04 Embedded DVR User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents