Home

Description of common NAND special features

1. Fill00 to Initial BB Disabled Not change the original semi vendor marked bad blocks Enabled Program the semi vendor specified bad block marker existed page s to all 0x00 for all original bad blocks PLEASE NOTE PROGRAMMER SYSTEM WILL ONLY DO THE PROGRAMMING OPERATION BUT WILL NOT CHECK THE RESULT Normally not required default Disabled bad block detection This item is useful when customer needs to move the bad block marker location or want to override default bad block markers but use bad block table to record the information Then we can only use the BBM specified way to detect the bad blocks while reprogramming semi vendor BB marker The normal way found the bad bock according to semi vendor specified bad block marker Actually the algorithm will work as earlier source code if this option selected BBM specified This option will give the detection work to BBM So it can use any bad block marker location even in main area or bad block table to detect the bad blocks BBM then BB marker Firstly work as BBM specified if it failed to find the bad block information then work as semi vendor BB marker to find the bad blocks Normally not required default semi vendor BB marker BB max allowed How many bad blocks allowed for this chip BBM can override this setting Normally not required default as semi vendor specified BB mark position BB mark mask Specify bad block mark positi
2. It is for device which has Hardware ECC calculation capability e g OneNAND etc Disabled Hardware ECC calculation is not allowed Enabled Hardware ECC calculation is allowed Normally existed only for capable devices default Enabled if listed or Disabled if not listed Special Notes 1 Customer should check and set the corresponding value per requirement but NOT rely on the default value 2 As devices have different features and customers have different requirement some of these listed special features might not be added for some device It s suggested to issue a DSR if any needed items missed 3 All BBMs default don t support read operation by itself unless special note in its user manual indicates it supports The BBM None or BBM_ReadBack can help normally History V1 01 Dec 9 2010 added Handle Empty Page V1 02 Jan 6 2011 added forcely close safety ID check V1 03 Jan 17 2013 added Error bits allowed per sector and sector structure for error bits V1 04 Jul 24 2013 updated the comments for error bits V1 05 Feb 21 2014 updated the comments for BBM read V1 06 June 27 2014 updated for Hardware ECC and Special notes V1 07 July 23 2014 added Error bits allowed per chip V1 08 August 20 2014 updated for Spare area V1 09 December 16 2014 added Spare area size in data file V1 10 September 23 1 2015 updated for sector struct
3. Description of common NAND special features General Description This is a conclusion of such special features which have been widely shared within NAND device supports they might relate to device features or different handling options but not directly BBM related Glossary of Terms BBM Bad Block Management scheme ECC Error Correction Code SLC Single Level Cell technology MLC Multi Level Cell technology OOB Region Out of Band region in a page It is also called Spare Area semi vendor BB marker Data located OOB region of a either the first or second page of a block in a device that the manufacturer uses to identify if a block is good or bad TLWin TaskLink List of special features and options Bad Block Handling Type This item specify which BBM Bad block management type will be used Always required no default value Spare area Disabled Data file does not contain Spare Area data TLWin will insert OxFF into the Spare Area of data file Enabled Data file contains Spare Area data that will be used directly ECC Data file doesn t contain Spare Area data TLWin will compute ECC based on your Bad Blocking Scheme to fill the Spare Area Update ECC field Data file contains Spare Area data but our system will update the ECC related field with proper value Always required default value not fixed Spare area size in data file How many bytes of spare area in data file If it s value is
4. abled The upper three items make up the error bits specification they should be set according to the device specification together with the ECC capability of target system If either of these two limitations doesn t match the device will be failed However for some latest NAND devices Error bits allowed in one page will be disabled while its value gt 254 and Error bits allowed per sector enabled a log could be found within eventlog if so Error bits allowed per chip How many error bits allowed per chip while verify This function can work on FC2 and FC3 Normally not required default 0 for Error bits allowed per chip that this feature is disabled Check BB Marker In DataFile Whether check the bad block mark position of the customer data file or not Every NAND chip has its own semi vendor specified bad block mark located in spare area if this item enabled programmer system will check the contents of this marker location and throw error if not all OxFF Normally not required default Enabled if not listed or specified Required good block area Start block Required good block area Number of blocks These two items specify a range of blocks which must all be good The device will be failed if any bad blocks found within this area Always required default 0 and 0 Force OTP Blank Check Disable Programmer system will do blankcheck on OTP area according to the programmin
5. g flag of the corresponding sectors Enable Programmer system will always do blankcheck on OTP area Normally not required default Disable if not listed Otherwise default value not fixed Skip Free Pages Disabled Work as normal all the data include blank pages will be programmed Enabled The blank pages all bytes with OxFF data of data file will skip programming operation while program function run Normally not required default Disabled Skip Last Free Space Disabled Work as normal all the data include blank pages will be programmed Enabled The continuous blank pages all bytes with OxFF data located at the end of a block of data file will skip programming operation while program function run Normally not required default Disabled Only Cal ECC for User Data YES Work as normal if set spare area as ECC static ECC will only be calculated for user data file NO If set spare area as ECC static ECC will be calculated for all the NAND range Normally not required default YES Handle Empty Page YES Work as normal NO Any pages which has all OxFF within the data file will not be handled in the related DLL of TLwin which means ECC field or any other tag locations will not be updated just keep the whole page includes the OOB might be inserted according to the settings of spare area as all OxFF Normally not required default YES
6. not 65535 TLWin will reduce or expand spare area in data file to device s spare area size ex If spare area bytes in data file is 64 but spare area size of device is 128 Then set it s value to 64 and TLWin wil auto expand spare area bytes in data file to 128 Normally not required default 65535 if not listed or specified Error bits allowed in one page How many error bits allowed within one page while verify this depends on the features of NAND SLC MLC Normally required default 0 if not listed or specified Error bits allowed per sector sector structure for error bits These two items can be used to specify the sector structure under page and how many error bits allowed per sector Works only on FC3 machine even they exist 528B cont from MNA to SPA Each sector contains 528 continuous bytes within the page 528B 512B of MNA 16 of SPA Each sector contains 512 bytes within main area and 16 bytes within the spare area of the page AutoSize continuous from main area to spare area Same as 528B cont from MNA to SPA but sector size is calculated automatically as 512 spare area main area size 512 AutoSize 512B of main area num of spare area Same as 528B 512B of MNA 16 of SPA but sector size is calculated automatically as 512 spare area main area size 512 Normally not required default 0 for Error bits allowed per sector that this feature dis
7. on within spare area and its mask Position is 0 based and LOGIC_1 of the mask means this bit is not care BBM can override this setting Normally not required default as semi vendor specified forcely close safety ID check YES If Electronic ID Check under Process tag is also unchecked the system will not do any ID check operation This option is not suggested however it gives the possibility if it s really needed in some special amp urgent case NO Work as normal Normally not required default NO erase error handling program error handling These two items only work if we had enabled the related function in the support they can specify how to handle erase and program error PLEASE NOTE WE WILL NOT ENABLE THE RELATED FUNCTIONS UNLESS CUSTOMER REQUIRED AND TOTALLY UNDERSTAND THE RISK AND AFFORD RESULT fail the chip fail the chip if any erase or program error met mark as BB and fail mark the error occurred block of the chip as bad block and then fail the chip mark as BB and go on mark the error occurred of the chip as bad block and continue process Normally not required default fail the chip ERASE AFTER PROGRAM Actually this item not only related to NAND devices If enabled our programmer system will erase the whole chip after programming This is mainly for flash testing usage Normally not required default Disabled if not listed or specified Hardware ECC
8. ure for error bits

Description of common NAND special features

Contents

Download Pdf Manuals

Related Search

Related Contents