슬라이드 1 - DriveAlertUSA.com
Contents
1. USER S Manual DRIVE ALERT This product is only a driving assistance system Any accident while using Drive Alert shall not be the responsibility of the manufacturer Please drive safely and follow all traffic laws for your area TABLE OF CONTENTS Safety Precautions Product Introduction Product Descriptions Components Installation Instructions Installation positions by car Features Settings 1 2 3 4 5 6 7 8 J Function description O Viewer program e ae Ae 1 Safety Precautions Please read the entire manual to understand how to use this product appropriately and safely to help prevent possible accidents or risks Make sure to follow all safety advice We will not be held responsibility for the incorrect installation or misuse of this product Warning Incorrect or misuse of the product can lead to serious damage or accidents If the product gets wet never put in a thermal device e g a stove or a microwave It may cause an explosion or malfunction of the product Avoid contact with most chemicals benzene thinner alcohol and detergents which can cause fire or damage to the product Make sure to correctly follow the user s manual If not the product may perform poorly or not work at all Keep the front windshield of the vehicle clean or the system may not function correctly Attach the product to the windshield with the included double sided tape Th2. you can check video images real time on a screen device by connecting Drive Alert USB port and the import port of the screen via the Video out cable 1 The provided Video out cable is RCA type male It can be connected to a AV IN RCA port of a monitor 2 The turn signal connection cable is all in one with Video out cable The turn signal cable comprises three lines Connect them with the signal lines 12V which are normally placed under the driver s seat Connect the black line with Ground and the rest two lines with the signal lines respectively 3 Once the turn signal cable is connected in the LDWS mode when you change the lane with the direction indicator on an alarm does not sound 7 Security LED The front LED blinks when Drive Alert detects a motion giving a warning sign that the black box is being recording 9 Function description 8 LED operation and emergency measure D Both red and blue LEDs on After booting all functions constant event manual recording are normally operable 2 Blue LED on and re LED blinking Storing of an event during constant event manual recording mode The red LED keeps blinking until the storing is completed After that both blue and red LEDs are turned on Red LED on and blue LED blinking First if the power cable is connected without the Micro SD card inserted blue LED is blinking Please make sure insert the SD card before connecting the poser cable Second if the Mic
3. 5 Peel back the door trim and remove 6 Arrange the Power and Signal cords the A Pillar Use the provided wire clips neatly under the headliner Use the to secure the Power and Signal wires provided wire clips if needed behind the A Pillar if needed 8 Connect the 12v Power adapter to the 7 Connect the Power and Signal cables cigarette lighter or 12v power plug to the main body 5 Installation instructions Installation instruction for the turn signal cable and video out cable a Pae _ _ cl eee i ee A To Monitor oe a To GAR of ff Red ff i 9 Connect the Red wire to the Right turn signal wire Connect the White wire to the Left turn signal wire Connect the Black wire to a Ground Connect the RCA cable to a monitor not included for the video out function Connect the USB cable to the unit itself You will typically find the signal wires in the steering column at the turn signal lever If not you will possibly find them at the flash relay typically under the drivers side dashboard The unit is looking for a 12v Positive signal only 5 Installation instructions 10 Park the vehicle on an even open road Position Drive Alert so that the blue line on the monitor is placed on the horizon the point where the virtua red lines cross as shown in the picture Tighten the angle adjusting bolt 11 Drive on a straight level road where the lane you are driving in
4. battery monitoring function that can help to prevent the battery from discharging below approximately 10 5V If this happens we will not be held responsible 8 Settings You can set all of the functions and modes of Drive Alert with the included remote CT Car Type Type of vehicle Drive Alert is installed in 1 Press this button GD to select the vehicle type 2 Press the arrow buttons O Keep pressing the arrow buttons until you hear the system state your vehicle type Once your vehicle type is announced it will be automatically set MUTE Mutes all sounds 1 Press this button to activate deactivate alarm sounds and voice instruction VOL Volume control 1 Press this button O to select the volume level 2 Press the arrow buttons 2 to adjust the volume up or down 8 Settings FCWS TTC Time to collision 1 This feature is for the predicted time to a front end collision Press this button to select the desired time 2 Press the arrow buttons Keep pressing the arrow buttons until you hear the system state your desired time Once the time is announced it will be automatically set If you set the time at 1 5 seconds the collision alarm will sound at a relatively longer distance A predicted distance to a collision can vary according to the car s speed WS Working speed 1 This feature is to set the working speed of the Forward Collision Warning Press this button to select the vehicle speed
5. during installation e Installation should be made on level ground with the vehicle engine turned off e Please check to ensure all components are included in the packaging and follow all installation instructions step by step e This manual describes how to install Drive Alert in most vehicle types passenger car SUV bus and truck For buses and trucks except for the installation position the procedures are similar with those for passenger cars e After the successful installation of the system drive on an even straight road with lines on both sides of the vehicle to receive a GPS signal this may take up to 5 minutes Drive between 25 and 30 MPH You will hear a recorded voice The system has been calibrated when the calibration is complete e If Drive Alert performs incorrectly please reinstall it according to the installation instructions 5 Installation instructions Installation for passenger cars and SUVs For perfect installation of Drive Alert please make sure to follow all details of this manual step by step Install this product with the vehicles engine turned off 1 Clean the inside of the front windshield 2 Apply the included double sided tape to the bracket 3 Attach the bracket firmly to the center of the front windshield behind the rear view mirror 4 Using the angle adjusting bolt temporarily and lightly secure the Drive Alert vertically from a side view 5 Installation instructions
6. mode 2 Press the arrow buttons Keep pressing the arrow buttons until you hear the system state your desired speed Once the desired Speed is announced it will be automatically set 8 Settings LDWS LWT Left side Warning Time Alarm timing for left line deviation 1 This is to set the timing of an alarm for a left line deviation If you feel that the timing of the alarm is too fast or slow you can change the alarm timing for every 4 2 Press this button D to select the left side warning time 3 Press the arrow buttons O Keep pressing the arrow buttons until you hear the system state your desired time Once the desired time is announced it will be automatically set 8 Settings LDWS RWT Right side Warning Time Alarm timing for right line deviation 1 This is to set the timing of an alarm for a right line deviation If you feel that the timing of the alarm is too fast or slow you can change the alarm timing for every 4 2 Press this button D to select the right side warning time 3 Press the arrow buttons 2 Keep pressing the arrow buttons until you hear the system state your desired time Once the desired time is announced it will be automatically set 8 Settings LDWS CR Calibration Reset 1 If the system operates incorrectly press this button to reset the calibration Follow the instructions for calibration on page 12 WS Working Speed 1 This feature is to set the work
7. ages The content in this manual is subject to change without prior notice 3 Product Description Bracket Holds the Drive Alert after being attached to the front windshield of the car Angle adjusting bolt Adjusts the angle between the main body and the bracket Camera Lens Security Warning LED Blinks when the system detects motion while in parking mode giving a visual warning sign that the system is recording REC Press the button to enable image recording During recording the red LED will blink Remote Eye Reset button Press and hold for 3 seconds to reset the unit to factory settings 3 Product Description CO DC Power Port Connect to the included power cable only USB Port Connect the included turn signal and video out cable only Micro SD card slot For use with the included Micro SD card only 4 Components Check if the components shown in the pictures below are included in the package If any item is missing or incorrect please contact the retailer where the item was purchased 5 Device Remote 12v Power Turn Signal Video Cable Out cable USER S Manual DRIVE ALERT Dre Abert Micro SD Card Adapter Manual 12v Power Cable for 3M double sided tape 3 Cable Mounts always ON connection X Specifications of included components subject to change without prior notice 5 Cautions for installation Caution W Make sure to keep the following in mind before and
8. ccessories on the front windshield of the car When the car is driving on a line so the camera does not recognize the line 2 Product Introduction This product is an artificial intelligence driving assistance device that includes many cutting edge features based on widely recognized technologies 1 Forward Collision Warning System FCWS that gives a warning when a collision is expected by automatically calculating the speed of the car in front and the distance to it 2 Lane Departure Warning System LDWS that sounds an alarm when you cross a line without using the turn signals 3 and automatic recording of camera images in the case of a sudden stop or accident Drive Alert can save your operating speed time and location of an accident through a GPS signal In places where the GPS signal reception is not possible or degraded underground tunnels Skyscrapers or forests the GPS function may not operate correctly This product is a driving assistance system designed to help prevent vehicle accidents Any accident or fine caused by speeding or breaches of local traffic laws shall not be the manufacturer s responsibility Make sure to observe all local traffic laws All intellectual rights regarding both hardware and software of this product are reserved by manufacturer Reproduction processing or dissemination of the product will be subject to criminal penalties under the intellectual property law as well as civil and criminal dam
9. ct can operate in all vehicle types Please ask the retailer where you purchased your Drive Alert from for use in you vehicle type Any damage or malfunction caused by power differences to the product installed in a truck or bus shall not be the responsibility of the manufacturer 7 Features of the Drive Alert FCWS Forward Collision Warning System Drive Alert is a driving assistance device that detects forward collision and lane deviation risks by obtaining an image of the road in front of the vehicle through its internal camera It analyzes the data real time and will give an audible warning to help prevent any possible accident Time To Collision TTC function With the TTC function on the Drive Alert can provide an audible alarm to alert you to a possible front end collision This function will only work above speeds of 10 MPH FCW Forward Collision Warning function The Drive Alert gives a warning when a sudden collision risk occurs This function will only work above speeds of 10 MPH 7 Features of the Drive Alert LDWS Lane Departure Warning System Drive Alert will audible alert the driver if the vehicle begins to leave the lane they are in without signaling Drive Alert can also give warnings in the case of continuous lane departures when the car deviates from its lane repeatedly without indication The driver can set his her own timing of an alarm five levels for left and right lines respe
10. ctively If the vehicle s turn signal lever is used Drive Alert will not sound the alarm This function will only work above speeds of 35 MPH 7 Features of the Drive Alert Black box Video Recording Drive Alert features a Black Box function An internal G sensor a shock detection sensor can detect an event which will trigger the Drive Alert to record an image from the camera for 40 seconds It will also record the time date and location of said event While driving Drive Alert will record a video image before during and after an event Drive Alert includes a 4GB Micro SD expandable to 32GB card the files will be stored on Drive Alert includes a PC viewer program that allows you can check the recorded images on a desktop or laptop computer 7 Features of the Drive Alert Black box Video Recording Approximately 7 minutes after the vehicle is turned off Drive Alert will automatically start a surveillance mode If Drive Alert detects motion an event such as a collision from another vehicle or theft attempt Drive Alert will record the event using the camera image for 40 seconds A security warning LED will blink if Drive Alert detects motion providing a visual warning that an image is being recorded For this feature to operate as stated Drive Alert needs to be provided with constant power Your vehicles battery may discharge to a point where the vehicle will not start if connected this way Drive Alert features a
11. e vibration of the vehicle can shift the position of the product over time which can cause performance degradation Do not dismantle the product If any indication of tampering is evident the warranty will be voided Use the Video out function only for installation purposes Driving while watching any screen can be dangerous Any accident or damage shall be the driver s responsibility solely 1 Safety Precautions Cautions prior to use In the conditions below the product may not operate correctly Make sure to follow the user s manual If not the manufacturer shall not be held responsible for any accident or malfunction On roads without lines or with lines that are difficult to recognize On roads where lines are partially erased When the GPS signal reception is low When the field of vision is poor due to bad weather e g heavy rain snow or fog At night on the entrance or exit of a tunnel or poor lighting At night the Forward Collision Warning System FCWS may not function correctly according to the brightness of the headlights or whether street lamps exist or not No light or sudden change in external lighting Sudden interruption of other cars or sudden change in lane On a sharp curve with the radius of curvature of less than 800 ft When any debris on the windshield degrades the camera s performance When the field of vision is bad due to thick coating stickers or a
12. has continuous lines dashed or not at a speed between 20 30 MPH until you hear the system announce Calibration Complete Once you hear the message all of the functions should operate normally 5 Installation instruction and calibration 12 If there is no monitor available install Drive Alert with the vertical and horizontal balance as shown in the picture below Fix the main body with the angle adjusting bolt horizontally with the ground Fix the bracket horizontally with the front windshield 6 Installation position by vehicle type Passenger car SUV amp VAN Attach the bracket on the front Attach the bracket on the front windshield behind the rear view mirror windshield behind the rear view mirror horizontally with the windshield horizontally with the windshield Installation Position 6 Installation position by vehicle type Bus Truck Attach the bracket to the windshield 6 from Attach the bracket to the windshield within 6 the bottom of the window frame Arrange from the bottom or top depending on model the cables across the dash using the of the window frame Arrange the cables provided wire clips if needed across the dash using the provided wire clips if needed Caution For some buses and trucks you may need to install a power stabilization cable a 24V to 12V adapter Drive Alert can operate in the voltage ranges of DC 12 24V but it does not necessarily mean that the produ
13. his case Drive Alert cannot automatically delete files Therefore it cannot record any more if the folder is full Caution Do not use the provided Micro SD card as memory storage of other devices Those files can cause malfunction or abnormalities to the SD card 3 For normal recording operation Drive Alert automatically maintain at least 80MB empty If the user stores other files on another device Drive Alert may not be able to secure the spare memory Please make sure not to store other files than Drive Alert recording file and PC Viewer files in the Micro SD card Please store the PC Viewer exe file initially contained in the provided Micro SD card in your desktop computer During constant recording if there is less than 80MB remained in the memory card Drive Alert automatically starts deleting previous files For event recording up to 100 files are stored and then the earliest recorded files start to be deleted If you need to format the SD card do it on your personal PC 9 Function description 10 Insert eject of the Micro SD card Insert the Micro SD card with its logo side toward the rear case of Drive Alert To eject the SD card slightly press it 3 For details see the picture below Caution Never insert eject the Micro SD card while the power is on Since Drive Alert operates once power is supplied inserting or ejecting the Micro SD card while powered can cause damage to the system and or the memory ca
14. ing speed of the Lane Departure Warning Press this button to select the vehicle speed mode 2 Press the arrow buttons Keep pressing the arrow buttons until you hear the system state your desired speed Once the desired speed is announced it will be automatically set 8 Settings BlackBox G G sensor shock 1 Press this button to select the impact sensor level 2 Press the arrow buttons amp Keep pressing the arrow buttons until you hear the system state your desired setting Once the desired setting is announced it will be automatically set 3 If you feel the system records impacts too often set the mode to insensitive level VS Video Size Resolution of the recorded video 1 Press this button D to select the recorded video resolution 2 Press the arrow buttons O Keep pressing the arrow buttons until you hear the system state your desired setting Once the desired setting is announced it will be automatically set QVGA 320x240 VGA 640x480 D1 720x480 TZ Time Zone 1 Press this button to set your area for the GPS Press the arrow button O to select your area Once the desired area is announced it will be automatically set 9 Function description 1 Function description D Once the car engine started Drive Alert is provided with power and red and blue LEDs are on gt Make sure that Drive Alert is connected to the cigar jack via the provided power cable After bo
15. onths 2 Repairs for the following cases will cause costs for technicians and components Damage caused by the user s reckless use Damage caused by misuse of power Damage caused by a bad connection Damage caused by repair or modification made by someone else other than our technicians When this warranty is lost 3 Components for repair of this product will be available for three years MEMO
16. oo often Adjust the alarm timing for left and right lines by pressing LWT and RWT buttons respectively Refer to pages 22 and 23 3 What happens if it rains During rain most of the functions may not work properly Please drive safely 4 What happens while driving at night At night some functions may be limited according to the condition of headlights street lamps etc Please drive safely D 11 Q amp A frequently asked questions BLACKBOX 1 Does recording also start after GPS reception It starts as soon as the system is powered up 2 How can I view the recorded videos Install the Viewer program included on the SD card 3 What happens if the memory of the SD card is full When the memory is full the first recorded files will be overwritten 4 How can I eject the Micro SD card Remove power from the unit and then remove the memory card 5 Event recording is too often Change the sensitivity of the G sensor to insensitive level by following the steps outlined on page 25 12 Technical specifications view anole OOO Operating Temp 0 C 60 C Storage Temp 10 C 70 C X Design and specifications of this Input Voltage DC12V DC24V product may change without prior notice consumption Warranty contents 1 Warranty period for this product is 1 year Damage caused during normal use within the period is subject to free repair service But accessories e g the power cable are covered for 6 m
17. oting Drive Alert starts operating with the recorded message Hello Please fasten your seat belt Voice instruction starts Use the remote control to turn Drive Alert on or off once power is supplied Or you can unplug the power cable from the product 2 Motion detection while the car is parked This surveillance mode automatically starts when the car stands still for 7 minutes This surveillance function automatically changes into a normal mode constant recording manual recording event recording once the car moves again During this mode video images for 20 seconds both before and after a detection are recorded and stored in the Motion folder Recording time can be reset through the remote control 4 During the surveillance mode constant manual event recording doesn t work To use this motion detection function Drive Alert must be connected to constant power supply Note For a constant power cable and its connection ask advice from a store near you Car battery discharge due to constant power supply to this product shall not be the responsibility of the manufacturer 9 Function description 3 Manual recording Briefly press the REC button to start manual recording The red LED will keep blinking until the recorded video file is stored The file is stored in the EVENT folder in the Micro SD card 3 The 40 second video file is stored as MP4 format 4 If you want
18. rd Samisk gt 4cB micro SP Micro SD Drive Alert Drive Alert receives GPS time data in regular interval and synchronize its time with the received time in order to record exact time of any event Therefore once time is set the RTC function makes Drive Alert work in accordance real time 1 Automatic time setting After booting when the car is in a place where GPS reception is possible for at least 5 minutes for the first use Drive Alert automatically synchronizes its system time to the received GPS time data 2 Since then time will be automatically set once every day 10 Use for Viewer program 1 Use for Viewer Program 1 Remove SD card from the product 2 Insert SD card with card adapter or card reader into your computer 3 Open your SD card and Copy the Viewer program PCViewer exe into your computer screen And Click PCViewerexe Main Screen of Viewer gt Press Folder Open button gt Screen for file list PC Viewer REC 11118 200017 wre gt Select folder that include the file you want to look at it gt Make double click the file like right photo amp PC Viewer REC T1110 200 Cautions If there is no video playing after click the file it might be CODEC problem You should 2 Explanations for buttons veal install a right CODEC Z codec pack first into your computer Press this button ieee in your Viewer as gt Play button 10 Vie
19. ro SD card is removed from Drive Alert intentionally or by an impact while power on blue LED is blinking Unplug the power cable and insert the SD card Then reconnect the cable 4 Blue LED on and red LED continuously blinking First if there are other files in the SD card recorded in other devices than Drive Alert recording doesn t work In this case format the Micro SD card before use Second when there are other problems with the SD card blue LED keeps blinking Please format the memory card before use D 9 Function description 8 LED operation and emergency measure Red LED is on but Drive Alert does not work First reset the product by pressing the reset button Second if it still doesn t work after format please upgrade firmware Third get Drive Alert repaired if the first and second steps don t work 6 Both red and blue LED off First check if the power cable is well connected Second check the cigar jack fuse D Blue LED on and red LED off First Drive Alert is upgrading firmware If it is successfully completed both red and blue LEDs are turned on 9 Function description 9 File format The format of recorded video files is MP4 Files are stored in the INFINITE folder for constant recording the EVENT folder for manual event recording and the Motion folder for surveillance recording Do not store other files in the EVENT and Motion folders In t
20. to extend manual recording time briefly press the REC button after the previous recorded file is stored Then another 40 second video will be stored continuously 4 Event recording Event recording records the images of an impact for 40 seconds that the internal G sensor detects and stores the recorded file as MP4 format The file is stored in the EVENT folder in the Micro SD card 3 In event recording sensitivity of the G sensor can be set as three levels sensitive normal and insensitive Every time the G button is pressed the voice message changes as follows sensitive detection gt normal detection gt insensitive detection Stop pressing the button when you hear the mode you want and wait until it is automatically set Caution Even in a same mode the sensitivity can vary according to the car type car conditions and the car s ability to absorb an impact Since event detection relates to a physical amount of an impact that the product can detects the sensitivity cannot be set according to the driver s feeling When event recording doesn t operate correctly the manufacturer does not hold any responsibility except for repair 9 Function description 5 Constant recording In this mode once power on Drive Alert keeps recording and the files are stored in the INFINITE folder in the Micro SD card 6 Video out and turn signal connection With the Video out function
21. wer program 6 PC Viewer REC_111107_200017 MP 6 PC Viewer REC_111107_200017 MP4 Information 126 76 66 55 2011 11 07 37 2 2 36 PM 08 00 17 LIST MAP REC MIN 195817 MPA Ta q REC_111107_195857 MP4 PAC 117107 _195937 MP4 10017 MP4 6 REC 1111 PALLE oe 7 REC _111107_200138 MP4 8 REC_111107_200218 MP4 9 REC _111107_200258 MP4 Information 126 76 66 55 2011 11 07 5 PM 08 00 17 icux Hi mcp a F 5 2014 Gas a 2011 SK MSC tomar NM UW BR W N FF 10 Lil Close Viewer Minimize Viewer Open the map Open file list File name that is playing Codec download web link button Folder selection button Information from GPS Google map screen Speed data Play amp Stop button 11 Q amp A frequently asked questions FCWS 1 How long it will take to boot The FCWS function will start as soon as the system receives a GPS signal 2 Alarms sound too often Change alarm conditions by pressing the TTC button You can adjust it to 0 5 seconds 3 What happens if it rains During rain most of the functions may not work properly Please drive safely 4 What happens while driving at night At night some functions may be limited according to the condition of headlights street lamps etc Please drive safely LDWS 1 How long it will take to boot The LDWS function will start after the system receives a GPS signal and the vehicle is driving over 35 MPH 2 Alarms sound t
Download Pdf Manuals
Related Search