Home

Avena 135/135 Duo

1. 72 20401541en ba a0 Base Station settings Setting the ring volume BS You can set the volume of the base station ring tone in 5 levels or switch it off completely Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry ge BA UGE and press the OK softkey v Select the menu entry lage papita and press the OK softkey A The current setting is indicated by a tick mark Select the desired volume level with the navigation keys OFF 1 5 and press the OK softkey and press the OK softkey no ring tone do not disturb quietest level 1 Find volume S loudest level 5 Confirm with the OK softkey The new volume level is set Press the cancel key for approx 2 seconds to return to the standby mode 73 20401541en ba a0 Base Station settings Setting the ring melody You can choose between 10 different ring tone melodies Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry and press the OK softkey and press the OK softkey v Select the menu entry isti usa and press the OK softkey v Select the menu entry Srt UE Muca Teis E and press the OK softkey a The current setting is indicated by a tick mark Select the desired melody with the navigation keys Confirm with the OK softkey The new melody is now set Press the can
2. 45 20401541en ba a0 Base Station settings Time and Date To set the date and time on your Avena 135 135 Duo follow the procedure below v Select the menu entry Open the menu by pressing the Menu softkey and press the OK softkey v Select the menu entry WISF AEI and press the OK softkey The display reads Man EE Enter the current date in the indicated format and press the OK softkey The display reads stie tu EE Enter the current time in the indicated format and press the OK softkey The new date and time are now stored Press the cancel key for approx 2 seconds to return to the standby mode Note The time and date setting is stored in the base station This means that each change of the time and or date applies to all other handsets which are logged on to the same base station 76 20401541en ba a0 Base Station settings Selecting the Flash time A so called flash signal is sometimes required to perform special network service func tions Ask your service provider for further details on when to use such a flash signal Your Avena 135 135 Duo has a dedicated key 8 to generate this flash signal To select the length of the flash signal follow the procedure below Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry ESS UG and press the OK softkey A The current setting is indicated by a tick mark Select the de
3. Name and number of the handset You can operate up to 5 handsets on the same base station This allows you to make internal calls bet ween handsets free of charge Ask your service provider about the availability and any charges for this service 13 Display and keypad Handset front view Earpiece additional loud speaker is located at the backside swissvoice Display with backlight illumination Navigation keys Soft key Soft key Cancel key Phonebook key Talk key Hands free key illuminated Message key illuminated Number pad R key VIP phonebook Microphone 20401541en ba a0 Display and keypad Handset keypad The following illustrations represent the keys on the handset keypad For each key a short description is provided 4 g 8 0E g fe 20401541en_ba_a0 Softkeys left and right which corresponding to different functions as displayed on the screen The navigation keys have different functions While in a standby open the redial list c While in a menu scroll up or down c During a call change the volume This C cancel key has different functions c While in a menu press to quit the sub menu C Press for 2 seconds to return to the standby mode During a call press to switch off the microphone mute Open the phonebook Talk key Corresponds to lift replace receiver on a conventional tele phone Hands
4. v Select the menu entry and press the OK softkey v Select the menu entry Maas isa P DE and press the OK softkey Select the m v The current call waiting status is shown e g Change the and press the OK softkey status according to your preference Confirm with the OK softkey Your Avena 135 135 Duo starts to send the corresponding network service code over the telephone line Depending on the service provider you may have to wait for a spoken confirmation from the network e Press the talk key to return to the standby mode Note For fax or m odem operation this call waiting function should be switched off in order to prevent errors in the data transmission 20401541en ba a0 43 20401541en ba a0 Multiple conversations Accept a waiting call If you are conducting a conversation you may accept a second incoming waiting call The procedure is different depending on whether you want to hold or end the first call L Q or Opt End the first call You are conducting a telephone conversation A second external party is calling you You hear the call waiting signal You end your current call by pressing the talk key The handset starts ringing again indicating the new incoming call Press the talk key to answer this incoming call Hold the first call You are conducting a telephone conversation A second external party is calling you You hear the cal
5. The display reads confirm The display briefly shows and press the OK softkey Press the Yes softkey to and the entire list is deleted Press the cancel key for approx 2 seconds to return to the standby mode Note The entire redial list is also deleted when the handset is reset Store number from the redial list in the phonebook ce Press the Redial softkey The first entry in the redial list is displayed A v Scroll to the desired entry using the navigation keys Open the redial list administration menu by pressing the Options softkey v Select the menu entry six Mise Ns ew a and press the OK softkey 88 The display reads zig gang E Enter the corresponding name and finish by pressing the Store softkey The display briefly shows Entra stored The entry is now stored in the phonebook Press the cancel key for approx 2 seconds to return to the standby mode 33 20401541en ba a0 Comfort dialling Dialling from the call register If the CLIP service is supported by your service provider then any unanswered calls will be stored in the call register This call register contains up to 20 entries If the call register is full then the newest entry overwrites the oldest one The handset display shows Maine aE if you have any new unanswered calls In addition the message key is blinking to indicate that you missed one or more calls Dialling a telephone number
6. Connecting the telephone Before you can start using your cordless telephone you must connect the power supply and telephone connection cables Safety note For the Avena 135 135 Duo base station use only the provided power supply type SNG 05 ea Telephone connection cable Connect the telephone connection cable to the socket on the base station marked with a telephone symbol and fit the cable into the corresponding groove 20401541en ba a0 Connect the other end of the telephone connection Connection cable to the telephone wall plug Note that for socket for the Ider t f wall t d d MEL CN pprop Pe RS socket for the teleph Power supply cable eSP pis connection The power supply cable is first plugged into the cable socket marked with the power supply symbol on the bottom of the base station Fit the cable in the appropriate groove Then connect the power supply to the 230 V outlet socket Note Your telephone will not function if the power supply is not plugged in or during loss of power 20401541en ba a0 Installation To disconnect the telephone first unplug the power supply from of the 230 V mains socket and then disconnect the telephone line cable from the wall connector To remove the connection cables press the cable grips e g with a ballpoint pen or similar object towards the connector and simultaneously pull out the plug along with the cable Connecting the charging bay Charging Bays are us
7. Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry MEW ERE EIS and press the OK softkey v Select the language of your choice and press the OK softkey Press the cancel key for approx 2 seconds to return to the standby mode and press the OK softkey and press the OK softkey 69 20401541en ba a0 Handset settings Select the display contrast For better display readability you can choose between 8 different display Open the menu by pressing the Menu softkey v Select the menu entry contrast levels and press the OK softkey and press the OK softkey and press the OK softkey v Select the contrast level of your choice and press the OK softkey Press the cancel key for approx 2 seconds to return to the standby mode Set modify the emergency numbers Even when the key lock is on you can still dial emergency numbers Your Avena 135 135 Duo supports up to 4 emergency numbers which you can freely assig Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry MALSE GLENN and press v Select one of the four emergency numbers which you want and press the OK softkey and press and press i You can now edit the emergency telephone number Press th delete the last digit Press the Store softkey to confirm th
8. 25 anaging the phonebook ssssssssssssss meme e ener 25 Dialling using the VIP phonebook sssssssssm eeseeeeeeeeeeeeeeeeens 28 anaging the VIP phonebook a cence eene 29 Quick Dial Network Mailbox 30 Redialling from the redial list essssssssssssss m 31 anaging the redial list _ mene 32 Dialling from the call register sssssssssssssssss eeee eee ees eteeeeeeeeeeeeees 34 anaging the call register 35 aking internal calS uuu meme enne 38 C allbaeleifibuSyr Ce E E s 39 Call anonyrmously i ee ip ettet n ooo teet ent epe tensile eter eia Maed 40 Direct Call E 41 Multiple conversations etie i tataa aaa PE S a aE 42 tela go 42 Enable disable call waiting sssssssssssssss e 43 Accept a waiting call zum usu atus aaa TRE RII DAN DLEU ST 44 Reject a waiting call a eee e cence eee mme n e em eme ener rne 45 Makinganiinternal inquiry call seisnes uuu e bti pase e EUR TN edat 46 Making an external inquiry call 47 20401541en ba a0 Contents Transferring a calli uu eee Pri eid t eres manda aan Ernia aqu aasan 48 Alternating between calls brokering r RR 48 Three party conference calls 49 Call ForwaTrdi g TIME 50 Enable disable Call Forwarding ss
9. a special phonebook with 7 names and telephone numbers D Press the VIP phonebook key a v Scroll to the desired entry using the navigation keys e Press the talk key The selected telephone number is dialled Note This VIP phonebook is stored in the base station and thus is available to all handsets which are logged on to the base station 28 20401541en ba a0 Comfort dialling Managing the VIP phonebook Editing an entry in the VIP phonebook o Press the VIP phonebook key a v Scroll to the desired entry using the navigation keys Opt Press the Options softkey v Select the menu entry Ie HM ae and press the OK softkey 8 Edit the telephone number and finish by pressing the OK softkey 8 Edit the corresponding name and finish by pressing the Store softkey The display briefly shows stg see aie b The changes are now stored in the VIP phonebook Press the cancel key for approx 2 seconds to return to the standby mode Note The VIP phonebook is stored in the base station Any changes in the phone book are thus also seen in other handsets which are logged in to the base station 29 20401541en ba a0 Comfort dialling Clearing entries from the VIP phonebook You can clear empty each entry in the VIP phonebook individually D Press the VIP phonebook key a v Scroll to the desired entry using the navigation keys Press the Options softkey v Select the menu
10. d clarons que le produit Type DECT Cordless Telephone Basisstation Ladestation und Handger te Base station charging bay and handsets Station de base station de recharge et combin s Model Avena 135 135 Duo die grundlegenden Anforderungen gem ss Artikel 3 der nachstehenden EU Richtlinie erf llt meets the essential requirements according to article 3 of the following EC Directive est conforme aux exigences essentielles de l article 3 de la Directive CE Richtlinie 1999 5 EG des Europaischen Parlaments und des Rates vom 9 Marz 1999 ber Funkanlagen und Telekommunikationsendeinrichtungen und die gegenseitige Anerkennung ihrer Konformit t Directive 1999 5 EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity Directive 1999 5 CE du Parlement Europ en et du Conseil du 9 mars 1999 concernant les quipements hertziens et les quipements terminaux de t l communications et la reconnaissance mutuelle de leur conformit und dass die folgenden harmonisierten Normen angewandt wurden and that the following harmonised standards have been applied et que les standards harmonis s suivants ont t appliqu s EN 60950 EN 301489 6 EN 301406 I Haegendort 06 02 2004 A Zipp oe eq ueLvSLOVOZ 92 Warranty Certificate e n swissvoice Warranty Certificate Garantieschein Bon de garant
11. handset displays the name of the calling party instead of the telephone number only if you have previously entered this telephone number in the phonebook The calling party may have restricted its identity In this case the name or number will not be shown The display will simply read Incoming call Incoming calls are signalled acoustically on both the handset and the base station You may change the volume and melody of these ring tones indivi dually refer to chapter Setting the ring volume HS BS Ending a telephone call To end a telephone call you simply press the talk key and the telephone connection is broken The handset returns to the standby mode 20401541en ba a0 21 20401541en ba a0 Making the first call Missed calls If you had one or more unanswered calls during your absence the handset display shows Heu calls In addition the message key is blinking to indicate that you missed one or more calls this applies only for missed calls for which CLIP informa tion was available Press the message key to open the call register to see who called you Refer to chapter Dialling from the call register for more information on the call register and it s features Handsfree calling The Avena 135 135 Duo handset is equipped with a loudspeaker which enables hands free calling Press the loudspeaker key on the handset to activate deactivate the loudspeaker The loudspeaker key is il
12. message key you go directly to the list of outgoing SMS messages where you can try to send the message again Press the cancel key for approx 2 seconds to return to the standby mode e 57 20401541en ba a0 SMS Messages Text editor Your Avena 135 135 Duo has a text editor with which you can enter and modify texts as well as navigate through the text lines In the text editor mode key functions are as follows Toggle between lowercase uppercase and digits Press this key to toggle between lowercase uppercase and digits The current status is indicate in the bottom line of the display Move the cursor a Move the cursor one character to the left a long press Move the cursor one line up Move the cursor one character to the right 3 3 long press Move the cursor one line down Delete characters Delete the character left from the cursor 4 long press Delete all characters Quit the text editor without saving 000 Enter characters Keys for entering characters Press the key one or more times to enter the required character The bottom line of the display briefly lists all available characters for this key SI OY 58 20401541en ba a0 SMS Messages Receiving SMS messages All received SMS messages are stored in the list of incoming SMS messages New inco ming SMS messages are also announced on the handset by displaying the symbol together with the text EME In this case
13. network 51 20401541en ba a0 Call Forwarding Note Usually CFB and CFNR can be enabled simultaneously to different destina tion telephone numbers Please ask your service provider for details Some service providers offer enhanced features e g to request the status of Call Forwarding options Please ask your service provider for details Program service codes for Call Forwarding Since Call Forwarding is a supplementary network service special network control codes are required for the Avena 135 135 Duo to be send to the network to activate de activate Call Forwarding Refer to chapter Editing programming network service codes for details on how to set modify the control codes for the different Call Forwarding options Make sure the correct codes are entered in your Avena 135 135 Duo Please ask your service provider for the correct code values 52 20401541en ba a0 SMS Messages Sending and receiving of SMS text messages in conjunction with the CLIP service is a supplementary network service and thus subject to availability from your service provider Please ask your service provider about the availability any charges and how to subscribe to this service Your Avena 135 135 Duo supports SMS text messages with a maximum length of 160 characters However not all telephones can receive SMS messages So if you want to send someone an SMS message first verify that the person who should receive the messa
14. new base station to which you want to switch to Confirm with the OK softkey Your handset is now assigned to the new base station Press the cancel key for approx 2 seconds to return to the standby mode Note The display only lists base stations to which the handset was previously logged on 87 20401541en ba a0 Appendix Table of available characters D y Character uppercase Character lowercase 80u8m00mpouo g space 1 0 amp 2 96 abc2 ec def3e ghi48Sji ii jki5 pqrs7Bs tuv8 wxyz9yypz 104 gj _ uppercase lt gt lowercase lt gt digit space space 1 0 amp lt gt DEF3EEEED GHI4G 11 Ti JKL5 MNO6NOO0O000GE D PQR7B TUVsUUUU WXYZ9YYPZ 2104 1 gj 3_ uppercase lt gt lowercase lt gt digit space 20401541en ba a0 Appendix Technical data Standard DECT GAP Number of channels 120 Duplex channels Frequencies 1880 MHz to 1900 MHz Duplex process Time multiplex 10ms frame length Channel raster 1728 kHz Bit rate 1152 Kbit s Modulation GFSK Speech coding 32 Kbit s Transmitting power 10 mW average power per channel Range up to 300 meters outside in buildings up to 50 meters Base station charging bay power supply 220 230 V 50 Hz power pack Base station charging bay power supply approx 3 VA Handse
15. o lt from the main menu f several new messages of different types are available then the display HMezzage waiting 24 20401541en ba a0 Comfort dialling Dialling using the phonebook Instead of remembering a telephone number you can lookup a name in the phonebook and dial the corresponding telephone number with a single key press 4 v ut Press the phonebook key The first entry in the phonebook is displayed The number of entries currently stored in the phonebook is displayed at the top of the display e g Bainan 3 Scroll to the desired phonebook entry using the navigation keys Alternatively you may use the number keys 0 9 to enter the first character of the desired name e g Press once to jump to the first entry starting with the letter J Press twice to jump to the first entry starting with the letter H Press the talk key The corresponding telephone number is dialled Note After you have located the desired phonebook entry you may press the OK softkey which allows you to edit or extend this telephone number before dialling Managing the phonebook The handset of your Avena 135 135 Duo stores up to 60 entries in the phonebook For each entry you can specify the telephone number max 24 digits and the correspon ding name max 15 characters 25 20401541en ba a0 Comfort dialling Creating a new entry in the phonebook Press the phonebook key to op
16. on to the base station the display will show Saf IGES Ma mie HE In this case follow the log on procedure as described chapter Log on the handset Note With this Avena 135 135 Duo you can operate up to 5 handset on the same base station This allows internal calls between handsets logged on to the same base station free of charge 18 20401541en ba a0 Making the first call Switching the key lock on off When carrying the handset with you you may want to switch on the key lock This pre vents any calls be made unintentionally since all key functions are disabled Pressing the key for approx 2 seconds will lock unlock the keypad When the keys are locked the display shows as well as the symbol Note Even when the key lock is on you can answer any incoming call simply by pressing the talk key You can always dial any of the predefined emergency numbers even when the key lock is on Set the time and date Before you make your first phone call you may want to set the correct time and date Please follow the procedure described in chapter Base Station settings Time and Date 20401541en ba a0 Making the first call Make a telephone call Now you are ready to make your first telephone call Lift the handset from the base station charging bay a Press the talk key You will hear the dial tone and the talk icon appears on the screen g Enter the telephone number Aft
17. station or in the charging bay The blinking battery symbol in the handset indicates the charging process The charging time for the batteries is approx 18 hours The battery charging status is indicated by the following indicators in the handset display Batteries full Battery charge reduced to 2 3 Battery charge reduced to 1 3 IE E Batteries almost empty After inserting new batteries in the handset the display will only indicate the correct bat tery charge status after a fully completed charge cycle Only after the first fully comple ted charge cycle your cordless telephone is fully operational Important The handset display will only indicate the correct battery charge status after a fully completed charge cycle e Always use NiMH rechargeable batteries never use regular batteries primary cells Installation Note Make sure to insert batteries in the handset before placing the handset in the base stations charging bay After a call has been made you may place the handset back in the base station charging bay Charging of the batteries is controlled electronically as to prevent batteries be damaged by overcharging For best battery performance do not remove the batteries from the handset other than for replacing them by new ones since this may have an adverse effect on the battery capacity After an extended period of use the capacity of the batteries may be improved by fully dischargi
18. they cannot make any telephone calls at your expense Tapping your conversation The handset and base station of your Avena 135 135 Duo are in connection through a radio channel The digital transmission between handset and base station is secured and protected from listening in so that it is practically impossible for anyone to listen to your conversations PIN code protection Several functions of your Avena 135 135 Duo are protected by a secret 4 digit PIN code so that no unauthorised persons can use these features Change the initial PIN code as soon as possible to a code which is only known to you refer to chapter Changing PIN code Never reveal your PIN code to anyone else but make sure that you remember your PIN code well Key Lock By activating the key lock refer to chapter Switching the key lock on off you can prevent that an unintentional key press will execute any function 65 20401541en ba a0 Handset settings Setting the ring volume HS You can set the volume of the handset ring tone in 5 levels or turn it off completely By pressing the G key approx 2 seconds the ring tone is switched on off The symbol X indicates that the ring tone is off do not disturb v Select the menu entry v Select the menu entry Open the menu by pressing the Menu softkey v Select the menu entry estas Kaza and press the OK softkey v Select the menu entry istae BN EE and press the OK soft
19. to the desired phonebook entry using the navigation keys Open the phonebook administration menu by pressing the Options softkey v Select the menu entry le Hp ume and press the OK softkey 8 The display shows the telephone number of this entry Edit this number and finish by pressing the OK softkey H The display shows the corresponding name Edit this name and finish by pressing the Store softkey The display briefly shows Entra stored The changes are now stored in the phonebook Press the cancel key for approx 2 seconds to return to the standby mode Deleting entries from the phonebook Press the phonebook key The first entry in the phonebook is displayed a v Scroll to the desired phonebook entry using the navigation keys Open the phonebook administration menu by pressing the Options softkey v Select the menu entry EZ The display reads confirm The display briefly shows from the phonebook Yes 9 Press the cancel key for approx 2 seconds to return to the standby mode 27 20401541en ba a0 Comfort dialling Note The phonebook is stored in the handset Any changes in the phonebook are thus not seen in other handsets which are logged on to the same base station The entire phonebook is cleared when you reset the handset refer to chapter Resetting the handset Dialling using the VIP phonebook With the VIP phonebook key I you have access to
20. you may press the blin king message key which takes you directly to the list of incoming SMS messages Note New SMS messages will not be received if the SMS memory is full So make sure that you delete any SMS messages before all memory space is used up List of incoming SMS messages Incoming SMS messages are stored together with their reception date and time Your Avena 135 135 Duo stores max 15 SMS messages If the SMS memory is full a corres ponding warning message is displayed asking you to delete one or more SMS messages first Each entry in the list shows the reception date and time the telephone number of the sender as well as the status new or read of the SMS message 59 20401541en ba a0 SMS Messages Reading entries from the list of incoming SMS messages Open the menu by pressing the Menu softkey v Select the menu entry Messages NN and press the OK softkey v Select the menu entry E and press the OK softkey v Select the menu entry ARH and press the OK softkey The first SMS message in the list is displayed e g The list is sorted by date and time of reception most recent message first a v Browse through the SMS messages using the navigation keys By pressing the Read softkey the text contents of the selected SMS message will be displayed a v Use the navigation keys to scroll through multiple lines of text within the SMS message Press the cance
21. S messages The list of outgoing SMS messages contains SMS messages which you have explicitly stored SMS messages which could not be send transmission failure SMS message which were send are deleted after successful transmission unless you have explicitly stored that message Remember that the SMS storage capacity of your Avena 135 135 Duo is limited to a total of 15 SMS messages Viewing entries from the list of outgoing SMS messages Open the menu by pressing the Menu softkey v Select the menu entry Messages lt lt and press the OK softkey v Select the menu entry EISE and press the OK softkey v Select the menu entry and press the OK softkey The list is sorted by date time of transmission most recent message first a v Browse through the SMS messages using the navigation keys By pressing the Read softkey the text contents of the selected SMS message will be displayed a v Use the navigation keys to scroll through multiple lines of text within the SMS message Press the cancel key briefly to return to the list of outgoing SMS messages 62 20401541en ba a0 SMS Messages Options for outgoing SMS messages When reading an outgoing SMS message the following options are available Open the SMS options menu by pressing the Options softkey v Select one of the following menu entries and press the OK softkey Send SMS Select this option if you want
22. aving entered the SMS text and the destination number you have two options Store the SMS in the list of outgoing SMS messages Send the SMS to the specified destination 56 20401541en ba a0 SMS Messages Store the SMS message SMS messages are not automatically stored after sending So if you want to keep an SMS message make sure that you store it first before sending You have entered the SMS text and the destination telephone number v Select the menu entry Pa aE i bed and press the OK softkey The display shows The SMS is now stored in the list of outgoing SMS messages and can be retrieved again later Press the cancel key for approx 2 seconds to return to the standby mode Note e Your Avena 135 135 Duo stores max 15 SMS messages If the SMS memory is full a corresponding warning message is displayed asking you to delete one or more SMS messages first New SMS messages will not be received if the SMS memory is full So make sure that you delete any SMS messages before all memory space is used up Send the SMS message You have entered the SMS text and the destination telephone number v Select the menu entry aE Ela and press the OK softkey The display shows State baa e dee while your Avena 135 135 Duo is trying to transfer send the SMS message over the network If an error occurs while transferring the SMS message the display will read SMS failure By pressing the
23. cel key for approx 2 seconds to return to the standby mode 74 20401541en ba a0 Base Station settings Changing PIN code The PIN code is a 4 digit secret number to protect your telephone from unauthorised use At the factory the PIN code is initially set to 0000 It is highly recommended to change this PIN code as soon as possible to your own personal code Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry and press the OK softkey and press the OK softkey and press the OK softkey Open the menu by pressing the Menu softkey di B The display shows RRs fag ii Meters E Enter the current PIN code factory setting 0000 and press the OK softkey E B The display shows iz lalis ere SE requesting you to enter a new 4 digit PIN code Finish by pressing the OK softkey cdi B The display shows MAAE ii ets ra requesting you to enter the new PIN code again Finish by pressing the OK softkey The display briefly The new PIN code is now stored shows Press the cancel key for approx 2 seconds to return to the standby mode Note Only authorised service staff can reset the PIN code Thus make sure that you do not forget your PIN code f you enter a wrong PIN code the display shows SAlam aa ii rx E Press the cancel key or wait a few seconds after which you are requested to re enter the correct code
24. cel key for approx 2 seconds to return to the standby mode Note Caution Sending and receiving SMS messages only works properly when the gateway telephone numbers are entered correctly Check carefully whether you need to specify the network access code in case your Avena 135 135 Duo cordless telephone is connected to a PBX system 55 20401541en ba a0 SMS Messages Writing SMS messages Your Avena 135 135 Duo supports SMS messages with a maximum length of 160 characters Open the menu by pressing the Menu softkey v Select the menu entry EY EPEW and press the OK softkey v Select the menu entry E and press the OK softkey v Select the menu entry RU Na s and press the OK softkey iff The display shows gata eu Enter the text for this new SMS message and press the OK softkey when finished Press the key to toggle between uppercase and lowercase characters The display shows Maataa ui sz ME Enter the telephone number where you want to send the SMS message to You can enter the telephone number directly or fetch it from e g the phonebook redial list etc ut Note If you are receiving an incoming call while you are writing an SMS message then writing of the SMS message is interrupted your handset starts ringing and you can answer the incoming call The incomplete message is stored in the list of outgoing messages and can be completed and send later After h
25. cess digit than your Avena 135 135 Duo will insert a dial pause after this network access digit Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry 88 Edit the digit according to the relevant PBX specifications and press the OK softkey to confirm The new digit is now stored and press the OK softkey and press the OK softkey and press the OK softkey Press the cancel key for approx 2 seconds to return to the standby mode Note Please be aware that your Avena 135 135 Duo does not automatically insert this network access digit before any specified telephone number For dialling from the call register through a PBX refer to chapter Dialling from the call register 20401541en ba a0 84 20401541en ba a0 Multiple handsets Log on the handset With the Avena 135 135 Duo you can operate up to 5 handsets on the same base station This allows you to make internal calls between handsets free of charge For each handset a procedure must be followed which sets up a radio connection between the base station and the respective handset This procedure is called Log on and is described hereafter Press the paging key on the base station for approx 10 seconds until you hear a confirmation tone The base station is now ready to accept a new handset Open the menu by pressing the Menu softkey v Select the menu e
26. duct is covered by a guarantee that is in accordance with the legal provisions of the country in which you purchased the product and which runs from the date of pur chase As proof of the date of purchase please retain the purchase receipt or after it has been fully filled out by the retailer the guarantee card that is at the back of the user manual Within the guarantee period all faults that are the result of faulty materials or manufacturing faults will be repaired free of charge Repair under guarantee will either be carried out by repairing the defective product or exchanging it as the supplier sees fit Defects that affect the value or use of the product e g battery cells by only a negligible amount as well as expendable items or damage that has been caused by improper use through fair wear and tear or by interference with the product by third parties are not covered by the guarantee Possible consequential damages resulting from the use the failure or faults on the pro duct in particular any liability for pecuniary loss are excluded from this guarantee In the event of a claim under the guarantee please contact the point of sale at which you purchased the telephone 90 ssvoice Konformitatserklarung Declaration of Conformity D claration de Conformit C X J 9 v V Wir n Swissvoice AG Nous Ade Fabrikstrasse 8 riens CH 4614 Haegendorf Switzerland erklaren dass das Produkt declare that the product
27. e Press the cancel key for approx 2 seconds to return to the st n and or modify he OK softkey he OK softkey he OK softkey o assign modify e key you changes andby mode 70 20401541en ba a0 Handset settings Resetting the handset With this procedure you can restore the handset settings to factory defaults Open the menu by pressing the Menu softkey v Select the menu entry v ox Select the menu entry v ox Select the menu entry The display shows entry Confirm with the Yes softkey The settings in the maypa e reset to a defaults Press the cancel key for approx 2 seconds to return to the standby mode and press the OK softkey and press the OK softkey and press the OK softkey Yes 71 Handset settings The following settings are affected when the handset is reset HS Setting Factory Default Language English Ring tone volume High level 5 Ring tone melody Melody 1 Voice volume Medium level 3 Low batt warning On Key click On Out of range Off Display contrast Level 4 Log on Base Station A Handset name INTERN Redial list Empty Phonebook Empty VIP phonebook Please note that the VIP phonebook remains unchanged when you reset the handset Note To reset the base station refer to chapter Resetting the base station 20401541en ba a0
28. e base stations 86 Log off the handset ssssssssssssssssssssss eee mee ee hee en ene nennen 86 Switch to another base station s sssnsrssssssssssssssssiasaa 87 LBIMDDAeet EE 88 Table of available characters icr nee ee eet E sana 88 Techriical data utr trot ere atbwe tea tede dutem detected fuat 89 Approval usasqa qa aaa ca tena munde tuU du Ama REN CE RS 90 CEC ertifieati fi uuu 90 Warranty Conditions cm 90 Declaration of Conformity 91 Warranty Certificate uuu u u u u aaa san kusaqa aai REDEMIT E Re ebd 93 20401541en ba a0 Installation Package contents The package for the Avena 135 contains the following items Avena 135 Base Station BS 2 Avena 135 Handset HS 2 rechargeable batteries NIMH AAA Telephone line connection cable Power supply type SNG 05 ea User Manual Note The latest version of the User Manual can be retrieved from the Swissvoice internet site at www swissvoice net Additional items for Duo In case you have purchased the Avena 135 Duo 2 handsets you will find the following additional items in the package Second Avena 135 Handset HS 2 additional rechargeable batteries NIMH AAA Charging bay for the second handset with power supply type SNG 06 ea Finding the best location In order to obtain the best performance of your Avena 135 135 Duo co
29. ed in another conversation you will hear the busy tone then you may activate this service When the other party becomes free your own telephone starts ringing and when you answer the network automatically sets up the connection Activating callback if busy You are trying to call someone The called party is already engaged and you hear the busy signal Opt Open the options menu by pressing the Options softkey v Select the menu entry SPEI LENS and press the OK softkey Depending on the service provider you may hear a spoken message e Press the talk key to return to the standby mode and wait for the network to reconnect you Note Ask your service provider about the availability and any charges of this service Make sure that you have programmed the correct network control code for this service This service will usually remains active for a limited period of time e g 30 minutes Ask your service provider for details 39 20401541en ba a0 Comfort dialling Call anonymously Your telephone number may be made available to the other party when you make a phone call ask your service provider about the availability and costs of this CLIP service However you may wish to hide your own telephone number from the person you are calling In this case your telephone number will not be displayed on the called party s telephone If you activate this mode it will only apply to the next telephone ca
30. ed to charge the batteries of additional handsets Simply connect the cable from the power supply to the charging bay Plug the power supply into the mains socket and place the additional handset in the charging bay The charging bay has no telephone cable connection 20401541en ba a0 Installation Inserting the batteries in the handset The handset will be fully operational only after the batteries have been fully charged for the first time Battery compartment The battery compartment is located at the bottom of the handset The battery compart ment holds two rechargeable NiMH batteries of type AAA Remove the battery compartment cover es Slide the cover of the battery compartment downward approx 3 mm and lift the cover Inserting the batteries caution note the correct polarity Insert the batteries in the battery compartment Pay special attention to the correct pola rity of the batteries The polarity information in the battery compartment must be aligned with the same symbols on the batteries If the batteries are incorrectly inserted the handset will not function and the handset may be damaged Replace the compartment cover by placing it about 3 mm offset downwards and slide it upwards until it clicks into place 20401541en ba a0 Installation Charging the batteries The batteries are not yet charged when you first unpack the telephone To charge the batteries place the handset in the base
31. en the phonebook Open the phonebook administration menu by pressing the Options softkey v Select the menu entry IE EI NES and press the OK softkey iff The display reads MIT rn Fia ar aed Enter the telephone number ox and finish by pressing the OK softkey For details on how to enter special characters see below 8 The display reads zt sau h Enter the corresponding name and finish by pressing the Store softkey The display briefly shows Entra stored The entry is now stored in the phonebook Press the cancel key for approx 2 seconds to return to the standby mode Entering Special Characters Note Special characters can be entered in the telephone numbers and stored in the phonebook Examples are P dial pause and amp flash e Enter a dial pause by pressing the Co key for approx 2 seconds Enter a flash by pressing the flash key For details on setting the length of the flash signal please refer to chapter Selecting the Flash time Correct entries by deleting the last digit character by pressing the Delete softkey 4 The available characters for entering names are listed in chapter Table of available characters Press to toggle between uppercase lowercase or digit characters 26 20401541en ba a0 Comfort dialling Editing entries in the phonebook Press the phonebook key The first entry in the phonebook is displayed a v Scroll
32. ency numbers a rr em eene 70 Resetting the handset sssssssssssssssssssssese emen mee ee rne ee ne nennen 71 20401541en ba a0 Contents Base Station s ttiR0QS J uuu IP 73 Setting the ring volume BS cece eee ee eee 73 Setting the ring melody 00 ccc cec cece cece e eee e eect ee emm e en ne nene nens 74 Changing PIN code cece eee e eee ee ects eee rr eee ee hee nn rn rns nn nsns 45 Time and date 76 Selecting the Flash time eee eec eee eee eee eeeeeee eee eeseeeeeeeeeeneeeeeees 77 Resetting the base station r e ee me nennen 78 Supplementary network services 80 Subscribe to network services a eee eene 80 C TIP Series oe cae etm DIL ML IU tUe IE 80 Function codes for network services ssssssssssse 80 Using network services through the menu sssssssssmm 81 Editing programming network service codes ssssssss 82 Network Mailbox Voicebox Mem 83 Connecting toa PBX eerte rne enun S a a Eneas Ez Re Rr nic 84 Specifying the network access digit 84 Multiple handsets ul Lipi eccL EO Rais Sex SEa 85 Log on the handset sssssssssssssssssssse Im eme ee ee ren rn rns nn rne 85 Log on to multipl
33. entry EIE The display shows and press the OK softkey Confirm by penu the Yes softkey The display briefly shows Ent r2 delet The entry will appear in the VP phonebook marked as ETZZUEEHI Press the cancel key for approx 2 seconds to return to the standby mode Yes Quick Dial Network Mailbox Your Avena 135 135 Duo offers a quick dial function for a network mailbox voicebox Such a network mailbox is a supplementary network service offered by your service pro vider acting as an automatic answering machine Press for 2 seconds and your Avena 135 135 Duo automatically dials the pre programmed telephone number of this network mailbox Refer to chapter Network Mailbox for more information on this network mailbox and how to use it 30 20401541en ba a0 Comfort dialling Note Please note that quick dialling is only supported for the key e Remember that this quick dial function is only used to access the network mailbox To activate de activate the mailbox you must send appropriate network codes to this mailbox Ask your service provider for details Redialling from the redial list The last 20 dialled telephone numbers are stored in the redial list Each subsequent dial led number overwrites the oldest entry in the list Redial a telephone number Open the redial list by pressing the Redial softkey The newest entry in the redial list is displayed The number of entries currently
34. er entering the last digit the telephone con nection is being made and you will hear the ring tone As soon as the other party picks up the phone you can start your conversation Alternatively you may follow these steps Lift the handset from the base station charging bay e Enter the telephone number You may correct the entry by pressing the cancel key which deletes the last digit Press the talk key After the connection is established you will hear the ring tone Note Your Avena 135 135 Duo supports the entry of telephone numbers with a maximum of 24 digits When entering more than 16 digits the additional digits are displayed on the second line of the display Your Avena 135 135 Duo offers several other means to dial telephone numbers e g using the phonebook For details refer to chapter Comfort dialling You may also make internal calls Refer to chapter Making internal calls for more details 20 Making the first call Answering a telephone call When someone is calling you you will hear the ring tone and the number or name of the calling party is displayed on the Avena 135 135 Duo handset Not all service providers support this so called CLIP service So ask your service provider about the availability and additional charges of service To answer a telephone call you simply lift the handset from the base station charging bay or you press the talk key Note Your Avena 135 135 Duo
35. fferent message lists Network Mailbox This list Shows whether you have new messages in your network mailbox only if available from your service provider This network mailbox works like an answering machine similar to what is often used for GSM mobile phones When you have one or more message in this network mailbox the display shows Mai Lor and the message key is blinking By pressing this message key you can call your mailbox directly to listen to the new message s Refer to chapter Network Mailbox Voicebox for more information on availability and operation SMS Messages For SMS messages actually two lists are available one for incoming and one for outgoing stored messages When you have one or more new SMS messages the display shows COE and the message key is blinking By pressing this message key you enter the list of incoming SMS messages directly Refer to chapter SMS messages for more details Call register This list contains missed incoming calls only calls for which CLIP information was available When you have missed one or more calls the display shows iz EEt IS EE and the message key is blinking By pressing this message key you enter the call register directly For more information on the call register and its features refer to chapter Managing the call register Note You can access the message lists by pressing the message key or by selecting the menu entry Messages o
36. free speakerphone switch the loudspeaker on off When the loudspeaker is on this key is illuminated Message key This key blinks when one or more new messages have been received Press this key to open the message list Numerical keys for entering telephone numbers as well as text When pressing the 1 key for approx 2 seconds long press the net work mailbox number is dialled directly In dialling mode when pressing the O key for approx 2 seconds long press a dialling pause is inserted between digits 15 20401541en ba a0 Display and keypad Ge Asterisk or star key to enter the asterisk symbol Pressing this key and holding it for approx 2 seconds switches the ring tone on off While editing names or writing text pressing this key switches between uppercase and lowercase characters Hash or pound key to enter the hash symbol Pressing this key and holding it for approx 2 seconds locks unlocks the keypad Open the VIP phonebook R or Flash key 20401541en ba a0 Display and keypad Base station front view The Avena 135 135 Duo base station is equipped with a multi functional paging key used for relocating the handset s see below and logging handsets on to the base station Paging key Charging cradle for the handset Relocating the handset paging You can easily relocate a misplaced handset by pressing the paging key on the base station All handsets whic
37. from the call list The handset display shows i zi bI EE Press the message key The most recent unanswered call is displayed A Scroll to the desired entry using the navigation keys e Press the talk key The corresponding telephone number is dialled or Open the menu by pressing the Menu softkey v Select the menu entry Messages ENS and press the OK softkey v Select the menu entry a v Scroll to the desired entry using the navigation keys and press the OK softkey Press the talk key The corresponding telephone number is dialled Note With PBX telephone systems Dialling from the call register works properly only if the PBX system automatically inserts first any required network access digit Refer to the respective PBX user documentation for more information 34 20401541en ba a0 Comfort dialling Managing the call register Show details of an unanswered call Press the message key v Select the menu entry A v Scroll to the desired entry using the navigation keys and press the OK softkey Open the administration menu by pressing the Options softkey v ox ox Select the menu entry DEGENE and press the OK softkey The display shows the telephone number of the caller as well as the time date of the call Press the cancel key for approx 2 seconds to return to the standby mode Store number from the call register in the phonebook Press the mes
38. g on procedure the handset display indicates the base sta tions to which you are already logged on by an asterisk ERSEL TER S AN Log off the handset Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry SEE mna and press the OK softkey 8 Enter the system PIN code of the base station and press the OK softkey v Select the internal number of the handset to log off e g Intern 2 and confirm with the OK softkey and press the OK softkey The display shows Maia ia arg Again confirm with the OK softkey The handset with the selected internal number is logged off from the base station Press the cancel key for approx 2 seconds to return to the standby mode 86 20401541en ba a0 Multiple handsets Switch to another base station After you have successfully logged your handset on to multiple base stations you still need to assign the active base station through which you want to make your phone calls At any given time only 1 base station can be the active base station for your handset Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry EXER E and press the OK softkey Press the OK softkey The currently assigned base station for your handset is displayed e g MESSIES Ia WS ESI and press the OK softkey and press the OK softkey v Select the
39. ge has a telephone with SMS capabilities SMS messages are stored in the base station of the Avena 135 135 Duo These SMS messages are thus available to all handsets which are logged on to this base station However only one handset can use the SMS functionality at the same time Your Avena 135 135 Duo can store up to 15 SMS messages at the same time In case you reach the maximum storage capacity you will see a corresponding notifi cation on the display of the handset s In this case you must delete one or more SMS messages first Note Your Avena 135 135 Duo does only support text formatted SMS messages Some service providers use an SMS transmission protocol which your Avena 135 135 Duo is unable to understand In this case you cannot send nor receive any SMS messages t is not always possible to send SMS messages to telephone numbers in the network of another service provider e g from fixed networks to GSM networks Ask your service provider about the current possibilities 53 20401541en ba a0 SMS Messages SMS Gateways SMS messages are send and received through so called SMS gateways which you must identify by their respective telephone numbers The Avena 135 135 Duo supports three individual SMS gateways SMS Gateway 1 for sending and receiving SMS messages SMS Gateway 2 for receiving SMS messages only SMS Gateway 3 for receiving SMS messages only Many service providers require a specific subsc
40. h are logged on to this base station will start ringing for 60 seconds enabling you to quickly find the handset s again Stop the ring tone on the handset by pressing the talk key Note A handset will not start ringing if the handset is not logged on to the base station For more information how to log on the handset to the base station refer to chapter Handset status at delivery 20401541en ba a0 Making the first call Switching the handset on off After placing the handset in the base station charging bay and completing the initial charging of the batteries the handset is automatically switched on and ready for operation Switching on the handset If the handset happens to be off you can switch it on again by pressing the talk key Switching off the handset You may switch off the handset in order to prolong the duration of the rechargeable bat teries Follow this procedure Open the menu by pressing the Menu softkey v Select the menu entry SEENE SAn ata and press the OK softkey The display shows ITA e d Dl Press the OK softkey to switch off the handset Note The handset does not respond to paging from the base station nor to inco ming calls when it is switched off Handset status at delivery The handset is initially already logged on to the base station In this case both the T and R symbols should be visible in the display If for whatever reason the handset is no longer logged
41. ie Certificato di garanzia Garantiebewijs Takuutodistus Garantibevis Garantisedel Garantibevis Certificado de Garant a Talao de garantia device type Ger tetyp type d appareil tipo di apparecchio toesteltype laitetyyppi maskintype apparattyp apparattype modelo del aparato modelo do aparelho serial number Seriennummer num ro de s rie numero di serie serienummer sarjanumero serienummer serienummer serienummer n mero de serie n mero de s rie dealer s stamp H ndlerstempel sceau du vendeur timbro del rivenditore stempel van de dealer kauppiaan leima forhandlerens stempel f rs ljarens st mpel forhandlerstempel sello del comerciante carimbo do vendedor dealer s signature date of purchase Unterschrift des Handlers signature du vendeur firma del rivenditore handtekening van de dealer kauppiaan allekirjoitus forhandlerens underskrift f rs ljarens underskrift forhandlers underskrift firma del comerciante assinatura do vendedor Kaufdatum date d achat data d acquisto datum van aankoop ostop iv ys kjepsdato datum f r k pet salgsdato fecha de adquisici n data de compra oe eq usLvSLOVOZ 94 oe eq u lrS1I0r0Z 95 oe eq usLvSLOVOZ 96 Internet WWNW Swissvoice net Swissvoice Ltd 2004 All rights as well as product availability and technical changes reserved 20401541en ba aO SV 20401541
42. ining parties are automatically connected call transfer Note Remember that setting up a conference call between external parties is performed in the telephone network supplementary network service This means that you will have to verify that this service is available from your service provider and that the correct control codes are programmed in your Avena 135 135 Duo 49 20401541en ba a0 Call Forwarding In case you are busy or away there are several options for people still to reach you Although your Avena 135 135 Duo does not possess an answering machine your ser vice provider might be offering you such an answering machine through a network mail box voicebox Refer to chapter Network Mailbox for more details Another possibility is to forward incoming calls automatically to another telephone number Call Forwarding Call Forwarding is not actually performed in your Avena 135 135 Duo but rather in the telephone network itself Therefore you must tell the network where you want to forward your calls to and your Avena 135 135 Duo provides menus to actually do just that Note Call Forwarding is a supplementary network service and thus subject to availability from your service provider Please ask your service provider about any subscription fees costs for this service Enable disable Call Forwarding Your Avena 135 135 Duo provides menus which make it very easy for you to enable or disable Call For
43. ion on supplementary network service and their associated codes Call Waiting Call Waiting is a supplementary network service offered by your service provider With this service you can be in a telephone conversation and still be informed that someone else is calling you In this case you will hear the call waiting tone and you may answer this call while your other conversation is put on hold Your Avena 135 135 Duo supports this network service Remember however that call waiting only works properly if your service provider has made it available to you e g if you have subscribed to this service The following call waiting functions are supported by your Avena 135 135 Duo Enable call waiting Disable call waiting Accept a waiting call during another conversation Reject a waiting call during another conversation Note Please note that you must make sure that the correct control codes for these functions are programmed into your Avena 135 135 Duo Ask your service provider about the correct network service control codes 42 Multiple conversations Enable disable call waiting You can enable or disabl e the call waiting features by sending the appropriate network service control code to the network Only when you enable this call waiting feature you will hear the call waiting The handse tone when a second call comes in is in standby mode Open the menu by pressing the Menu softkey
44. issvoice Avena 135 135 Duo User Manual Attention User Manual contains safety precautions Please read before putting into operation and store in a safe place in m pu E S gt lt E H 2 E Safety precautions This DECT cordless telephone is intended for transmitting speech over the analogue tele phone network Any other type of use is not permitted and is considered in violation of the provisions This User Manual with its safety precautions is part of the product package and must be handed over to the new owner when sold Caution Use only approved rechargeable batteries Nickel metal hydride NIMH AAA preferably with more than 650 mAh Using other types of rechargeable batteries or non rechargea ble batteries primary cells can be dangerous and may cause malfunction of or damage to the device The manufacturer accepts no liability in this event Note the correct positioning of the batteries as indicated in the battery compartment of the handset gt Do not immerse the rechargeable batteries in water or throw into fire c Rechargeable batteries can get warm while recharging this is normal and not dangerous gt Do not use any other type of charging unit otherwise the rechargeable batteries may be damaged Persons wearing hearing aids should note that radio signals may be picked up by the hearing aid and may cause unpleasant buzzing noises Do not use your DECT cordless telephone in environments wi
45. key a v ec with the navigation keys OFF 1 5 no ring tone do not disturb LATER EE UE MEE quietest level 1 Find volume 5 loudest level 5 Confirm with the OK softkey The new volume level is set Press the cancel key for approx 2 seconds to return to the standby mode 66 and press the OK softkey and press the OK softkey urrent setting is indicated by a tick mark Select the desired volume level 20401541en ba a0 Handset settings Setting the ring melody You can choose between 10 different ring tone melodies Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry ire BAN and press the OK softkey v Select the menu entry lae BU Te E and press the OK softkey a The current setting is indicated by a tick mark Select the desired melody with the navigation keys and press the OK softkey and press the OK softkey Confirm with the OK softkey The new melody is now set Press the cancel key for approx 2 seconds to return to the standby mode 67 20401541en ba a0 Handset settings Enabling disabling warning tones On the Avena 135 135 Duo you may enable or disable the following audible warning acknowledge signals on the handset Low battery low Key click Out of range Open the menu by pressing the Menu softkey v Select
46. l key briefly to return to the list of incoming SMS messages Press the cancel key for approx 2 seconds to return to the standby mode Note After having read an SMS message the status of the message is automatically changes from New to Read 60 20401541en ba a0 SMS Messages Options for incoming SMS messages When reading an incoming SMS message the following options are available Open the SMS options menu by pressing the Options softkey v Select one of the following menu entries and press the OK softkey upi Wa sss Select this option if you want to answer this SMS message You are asked whether you want to copy the text of the original incoming SMS message Complete the text of your answer and send it off The destination number is automatically copied from the original sender BSB Select this option to delete this incoming SMS Call thHisg rumber If you select this option your Avena 135 135 Duo directly dials the tele phone number of the sender of this incoming SMS message eae ee You can copy the telephone number of the sender of this SMS message directly into your phonebook All you have to do is enter the name to be stored in the phonebook Note New SMS messages will not be received if the SMS memory is full So make sure that you delete any SMS messages before all memory space is used up 61 20401541en ba a0 SMS Messages List of outgoing SM
47. l waiting signal Open the options menu by pressing the Options softkey Select the menu entry EXE and press the OK soft key Your current conversation is put on hold and you are connected to the waiting caller Note The network usually allows you a few seconds to accept a waiting call If you do not respond quickly enough the calling party will hear a busy tone f you have put your other conversation on hold then you have a choice of different actions to undertake You may switch between the two conversations brokering refer to chapter Alternating between calls you may transfer the call or you may enter into a conference call refer to chapter Three party conference call 44 20401541en ba a0 Multiple conversations Reject a waiting call You are conducting a telephone conversation A second external party is calling you You hear the call waiting signal Opt Open the options menu by pressing the Options softkey v Select the menu entry MESME EN and press the OK soft key The call waiting signal is switched off the calling party hears the busy tone and your telephone conversation with your original party continues Note Remember to ask your service provider about the availability and any charges of these call waiting services Make sure that you have programmed the correct control code for these call waiting services 45 20401541en ba a0 Multiple conversati
48. ll you are making The mode call anonymously is automatically disabled after you have made the call whether successful or not Your handset is in standby mode Open the menu by pressing the Menu softkey Select the menu entry SREB sta gular ES EE After pressing the OK key you are requested to enter the phone number of the party you want to call or use the option softkey to access the pho nebook or other dialling lists Press the talk key to dial this number When dialling the Avena 135 135 Duo automatically inserts the pre defined network control code for this service before the telephone number this is also shown on the display Note Ask your service provider about the availability and any charges of this service Make sure that you have programmed the correct network control code for this service 40 20401541en ba a0 Comfort dialling Direct Call You may switch your Avena 135 135 Duo into Direct Call mode In this mode the handset starts dialling a pre defined telephone number whenever you press any key on the handset This mode may be helpful for parents with small children In case when the parents are away the children can be told that they can reach their parents or neighbours simply by pressing any key on the handset Of course the corresponding telephone number must be programmed in the handset by the parents before Open the menu by pressing the Menu softkey v Select the me
49. ls one of which on hold one external and one internal call e Simply press the talk key to transfer the call and connect both parties Alternating between calls brokering If you have two calls at the same time one call on hold then you may want to switch between both calls without ending either of the calls brokering LO C You have two calls one of which on hold Simply press the Brokering softkey to alternate between both calls e Simply press the talk key to end one of the calls You are automatically con nected to the remaining party Note Remember that brokering between external calls is performed in the telephone network supplementary network service This means that you will have to verify that this service is available from your service provider and that the correct control codes are programmed in your Avena 135 135 Duo 48 20401541en ba a0 Multiple conversations Three party conference calls If you have two calls at the same time one call on hold then you may want to connect all parties in a so called 3 party conference call LO 4C You have two calls one of which on hold Simply press the Conference softkey to enter into a 3 party conference call Conduct your conference call now Press the Split softkey to split up the conference call in individual calls again By pressing the talk key in the middle of a conference call you disconnect yourself from the conversation and both rema
50. luminated when the loudspeaker is activated The volume of the earpiece and of the loudspeaker can be adjusted independently refer to chapter Changing the voice volume during a call Warning The loudspeaker is located at the backside of the handset and may produce loud tones Never place the loudspeaker close to your ear in order to prevent hearing damage 22 20401541en ba a0 Making the first call Changing the voice volume during a call During a call you can independently adjust both the earpiece and loudspeaker voice volu mes in five levels L Vol 4 v You are conducting a telephone conversation Press the Volume softkey The current setting is indicated by a tick mark Select the desired volume level with the navigation keys 1 5 When handsfree is off you can adjust the earpiece volume quietest level 1 loudest level 5 Speaker uol 3 loudest level 5 Confirm with the OK softkey The new voice volume level is set Muting the handset If you are in a telephone conversation with someone and you don t want that person to hear what is being said in the room then you can temporarily switch off the microphone of the handset mute by pressing The 1 icon appears in the display to indicate that the microphone is switched off Press again to switch the microphone back on 23 20401541en ba a0 Message Lists Your Avena 135 135 Duo has three di
51. m your ser vice provider and that this service is activated with a flash signal Make sure that the cor rect flash signal period is programmed in your Avena 135 135 Duo You are conducting an external call and you want to call another external party without ending the first conversation Start the external inquiry call by pressing the R key flash key If this service is supported by your service provider you will hear the dial tone Now enter the external telephone number for your inquiry or select a num ber e g from the phonebook You now have two external calls at the same time one of which is on hold You can switch between both parties by pressing the Brokering softkey You can also enter into a 3 party conference call by pressing the Conference softkey Note e f you end this inquiry by pressing the talk key the current conversa tion is ended and your handset starts ringing indicating that you still have another call holding Press again the talk key to switch back to this conver sation t is not possible to make an external inquiry if you already are in an internal conversation 47 20401541en ba a0 Multiple conversations Transferring a call If you have made an internal inquiry and thus you have two calls at the same time one call on hold then you may want to connect transfer the external call to the inter nal call on the other handset 7 7 You have two cal
52. n automatic answering machine very similar to the customary mailboxes for GSM telephones Please note that this is a supplementary network service and subject to availability from your service provider Please ask your service provider also about any charges costs as well as a full description of the service functionality Your Avena 135 135 Duo supports this service by providing a quick dial function assigned to the key When you press this key for 2 seconds long press the telephone number of this network mailbox is automatically dialled Note Make sure that the correct telephone number of your network mailbox is programmed in your Avena 135 135 Duo n some cases your Avena 135 135 Duo will not display a text indicating that you have new messages in your network mailbox This may happen when the communication protocol used by your service provider is not compatible with the protocol supported in the Avena 135 135 Duo In order to control this network mailbox listen to messages record an announcement activate de activate the mailbox etc you must send appropriate control codes to this mailbox Ask your service provider for details 83 Connecting to a PBX Specifying the network access digit If your Avena 135 135 Duo cordless telephone is connected to a PBX telephone system you may have to specify a network access digit to seize an outside telephone line If the first digit of a phonenumber matches this network ac
53. ng the batteries first and afterwards fully char ging them again You can telephone for up to 12 hours with fully charged batteries If the batteries are almost empty the r battery symbol is displayed and a warning signal will be heard if such a warning signal is enabled You then have approx 10 minutes of conversation time left 20401541en ba a0 20401541en ba a0 Display and keypad Display and symbols The handset display provides easy to understand information on the current status of your telephone The 4 line display with backlight illumination is capable of showing several graphical symbols and text lines The meaning of the symbols shown in the upper part of the display is as follows E it i a IHTERH 1 T RE co 8 95 um IHTERH l This antenna symbol is permanently lit if a radio connection between handset and base station exists A blinking symbol shows that the hand set is almost outside of the range of the corresponding base station You have pressed the talk key Indicates that the handset is logged on to base station A B C or D Upon delivery the handset is logged on to base station A The keypad has been locked key lock One or more new SMS text message have been received The ring tone has been switched off do not disturb Incoming calls are signalled by a short beep The microphone is switched off mute Indicates charge status of the battery
54. ntry and press the OK softkey d on HS and press the OK softkey If you are using more than one base station you may select another base station e g B C or D Press the OK softkey The display reads Searching BS If the base station was found then you are requested to enter the system PIN code of that base station ctt o Confirm with the OK softkey The handset is now logged on to this base station The display will reflect this by showing both the T and R symbols s Note f the log on procedure was successful the display will show the name as well as the internal number of the handset e g illas zs The internal number of the handset is automatically assigned by the base station and cannot be changed To make it easier to identify the handset you may change the name of the handset e g to PETER or MARY 85 20401541en ba a0 Multiple handsets Log on to multiple base stations You can also log on your handset to multiple base stations max 4 This is useful e g if you have an Avena 135 135 Duo base station at home and another Avena 135 135 Duo base station at work When you log on your handset to both these base stations than you can take this handset with you from home to work and be able to make telephone calls at both locations with just one handset In this example you might select base station A for the one at home and base station B for the one at work In the lo
55. nu entry Eam E ep and press the OK softkey 8 Enter the system PIN code 0000 at the delivery and press the OK softkey Select the menu entry SSF URSE ap and press the OK softkey zi The display shows stg a gama nm ae and you are requested to enter the destination telephone number Confirm by pressing the OK softkey The handset returns to the standby mode The display shows Direct Call to indicate that direct dialling is activated Whenever you press any key the handset automatically starts dialling the pre viously entered telephone number Note While Direct Call is activated you can still normally answer any incoming call De activate the Direct Call mode by pressing the Options softkey and selecting the menu entry EMISIT TB MR d Key Lock cannot be enabled while in Direct Call mode 41 20401541en ba a0 Multiple conversations Your Avena 135 135 Duo supports having multiple conversations at the same time For example while talking to someone you can make an inquiry i e put the caller on hold and call someone else Some of these multiple conversation features are using supplementary network services offered by your service provider Ask your service provider about the availability and any charges of such services Also make sure that the correct network service codes are pro grammed into your Avena 135 135 Duo Refer to chapter Supplementary network ser vices for more informat
56. ons Making an internal inquiry call When you are conducting an external call you may want to make an inquiry call to someone else without ending the original conversation An internal inquiry call is performed entirely in the base station This means that internal inquiry calls are not depending on the service offerings of your service provider C You are conducting an external call Press this softkey to open the list of available internal destinations i e other handsets which are logged on to the base station Int v Select the internal destination you want to call from the list e g itunes and press the OK softkey to dial this number Conduct your internal inquiry conversation You can switch between both parties by pressing the Brokering softkey You can also enter into a 3 party conference call by pressing the Conference softkey Note e f the other internal party hangs up first you are again connected to your original external party If however you end this inquiry first by pressing the talk key the external call is automatically connected to the remaining internal party Only one single internal call can be made at any time 46 20401541en ba a0 Multiple conversations Making an external inquiry call An external inquiry call is performed in the telephone network supplementary network service This means that you will have to verify that this service is available fro
57. orwarding on Busy CFB Make an anonymous call Initiate callback when party is busy Call Completion Busy Subscriber Telephone number of the network mailbox voicebox As a reminder for yourself use this column to write down the appropriate codes according to your service provider s specifications 81 20401541en ba a0 Supplementary network services Editing programming network service codes Before using any of the supplementary network services please make sure that the cor rect codes are stored in the Avena 135 135 Duo Here is how you can verify and edit these codes Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry az ea iM and press the OK softkey v Select the menu entry statale E and press the OK softkey v Now select the required network service from which you want to verify or change the control code and press the OK softkey and press the OK softkey 88 Edit the code according to the service provider specifications and press the OK softkey to confirm The new code is now stored Press the cancel key for approx 2 seconds to return to the standby mode Note To enter a flash character press the R key 82 20401541en ba a0 Supplementary network services Network Mailbox Voicebox A special supplementary network service is the so called Network Mailbox or Network Voicebox This service acts as a
58. rdless telephone place the telephone in the centre of your apartment living quarters Avoid positioning the telephone in niches recesses and behind steel doors The maximum range in open field between base station and handset is approx 300 meters The actual range can be smaller depending on the surrounding conditions as well as spatial and building construction factors Within buildings a range of up to 50 m can be reached 20401541en ba a0 Installation Depending on the structural surroundings radio dead spots may occur even within this indoor range caused by the digital transmission in the frequency range Reduced trans mission quality results in short interruptions of the transmission To improve the transmis sion quality move the telephone slightly away from the radio dead spot A connection between base station and handset will be broken when the radio range is exceeded for more than 10 seconds In order to avoid signal interference with other electronic devices a distance of al least 1 meter between the telephone and other equipment is recommended Positioning the base station charging bay Position the base station as well as any additional charging bays in a clean dry and well ventilated location Choose a spot that is stable level and not subject to vibration In order to avoid a mutual interference do not place the base station charging bay in the immediate vicinity of other electronic equipment such as hi fi sy
59. ription initialisation procedure to be com pleted before you can receive any SMS messages Often this is done by sending an SMS with a specific text to a specific number Ask your service provider about details of such procedures Note Make sure that the correct telephone number s of the SMS gateway s are entered in your Avena 135 135 Duo otherwise you will not be able to send nor receive SMS messages Ask your service provider about these gateway numbers Also make sure that you completed any subscription initialisation proce dures which may be required by your service provider 54 20401541en ba a0 SMS Messages Editing SMS gateway numbers You may edit the telephone numbers of each of the three SMS gateways individually Please ask your service provider for the correct telephone numbers of the respective gateways Open the menu by pressing the Menu softkey v Select the menu entry Messages SSS and press the OK softkey v Select the menu entry E and press the OK softkey v Select the menu entry v Select the gateway of your choice and press the OK softkey and press the OK softkey sending and receiving SMS messages receiving only receiving only 8 The display shows the current number of this gateway Edit this number and finish by pressing the OK softkey The display briefly shows Entra stored The new gateway number is now stored Press the can
60. s 50 Program service codes for Call Forwarding ssss assrsssrssiass 52 MUENUIILTCPRCIIAED M Hem 53 SMS Gateways nubosos una dese t teen Peor iiltegpath utes wide anos ala tA 54 Editing SMS gateway numbers ssssssssssss eme eene 55 Writing SMS messages ireren i renr EPRA COREE HN EEEE mener 56 MES eo Nira AAEE PET a bei tani ep powder ptr udi 58 Receiving SMS messages r meme ee enne ene rennen 59 List of incoming SMS messages a r meme 59 List of outgoing SMS messages rr r mI meme ener enne 62 Special SMS features em eee eee ne rn rne nn nne rn 64 Prevent unauthorised use eese nenne nnne nnn nnne 65 Authorised calls i23 u tota etta Susa Tasa ubt beoe ondes a Ue teg 65 Tapping your conversation ssssssssssse HII m ehe ee ee eee 65 liae dou c een 65 Cour emm 65 Handset settings ee e Mie nee ee ie edit decane eel 66 Setting the ring volume HS ssssssssssssssssss meme emere 66 Setting the ring melody sssssssssssssssssss em eere en rennen 67 Enabling disabling warning tones sss 68 Editing the handset name sssssssssssssssss mme eere rne 69 Select the display language ssssssssssssssss eee emere 69 Select the display contrast sssssssssssssss meme emere 70 Set modify the emerg
61. sage key v Select the menu entry A v Scroll to the desired entry using the navigation keys and press the OK softkey Open the administration menu by pressing the Options softkey v Select the menu entry Press the cancel key for approx 2 seconds to return to the standby mode 35 20401541en ba a0 Comfort dialling Deleting an entry from the call register Press the message key v Select the menu entry a v Scroll to the desired entry using the navigation keys and press the OK softkey Opt Open the administration menu by pressing the Options softkey v Yes The display reads to confirm The display briefly shows from the call register Press the cancel key for approx 2 seconds to return to the standby mode Note The call register is stored in the base station Thus all manipulations of the call register such as deleting an entry will be reflected in all handsets which are logged on to the base station 36 20401541en ba a0 Comfort dialling Deleting the entire call register Press the message key v Select the menu entry Open the administration menu by pressing the Options softkey v Select the menu entry BE The display reads to confirm The display briefly shows deleted Press the cancel key for approx 2 seconds to return to the standby mode Note The entire call register is also deleted
62. se note that neither the VIP phonebook entries nor the network codes and SMS Gateway numbers are affected when the base station is reset To reset the handset refer to chapter Resetting the handset 79 20401541en ba a0 Supplementary network services Subscribe to network services Many service providers offer a wide range of supplementary network services One of the most well known network services is the CLIP service which makes it possible that you can see the telephone number of the person who is calling you For many of these network services you need to subscribe to them in order to be able to use them Ask your service provider about the availability and any additional fees costs of such services CLIP Service Your Avena 135 135 Duo cordless telephone supports the CLIP service This means that the telephone number of the person who is calling you can be displayed on the handset Not all service providers support this CLIP function Also calling parties may hide their telephone number so called anonymous calls In such cases the telephone number of the calling party is not displayed on the handset Function codes for network services Many of the supplementary network services work by sending special function codes network control codes from the telephone to the network e g 7 Very often these codes include the special characters or In some cases a so called flash character may be required On
63. sired flash time with the navigation keys e g ai E GLS and press the OK softkey Select one of the following values in msec e 80 100 120 180 250 300 or 600 msec Confirm with the OK softkey The new flash time is set Press the cancel key for approx 2 seconds to return to the standby mode Note The flash time setting is stored in the base station This means that each change of the flash time is immediately available to all other handsets which are logged on to the same base station 77 20401541en ba a0 Base Station settings Resetting the base station With this procedure you can restore the base station settings to factory defaults Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry Yes and press the OK softkey and press the OK softkey and press the OK softkey 88 Enter the PIN code and confirm with the OK softkey The settings in the base station are reset to factory defaults Press the cancel key for approx 2 seconds to return to the standby mode 78 20401541en ba a0 Base Stati The following on settings settings are affected when the base station is reset BS Setting Factory Default Ring tone volume High level 5 Ring tone melody Melody 1 Flash time 250 msec Call register Empty Network access code none PIN code 0000 Note Plea
64. stems office equip ment or microwave ovens Avoid locations near a heat source e g heating radiators or near obstacles such as metal doors thick walls niches and cupboards The base station charging bay is not equipped with a mains switch For this reason the power outlet to which the telephone is connected must be easily accessible Note The base station charging bay must not be exposed to direct sunlight The base station charging bay must be protected from moisture Do not place the telephone in rooms exposed to condensation corrosive steam or excessive amounts of dust Condensation often occurs in basements gara ges winter gardens or sheds The ambient temperature must be between 5 C and 40 C 20401541en ba a0 Installation Wall mounting Your Avena 135 135 Duo cordless telephone is suitable for wall mounting Two screws and wall plugs are provided for this purpose Place the plugs vertically at a distance of 90 mm from each other and insert the screws Leave approx 3 mm space between the screw head and the wall Hang the base station on the screws and connect the power supply and telephone cables 90 mm See d Note e 230 V mains outlet and telephone wall connector should be within the range of the supplied cables The base station must not be mounted in door or windows frames risk of damage Caution take care not to damage hidden cables in the wall Installation
65. stored in the redial list is displayed at the top of the display e g Eloa TB BEER EP A v Scroll to the desired entry using the navigation keys e Press the talk key The selected telephone number is redialled Note After you have selected the desired redial number you may press the OK softkey which allows you to edit or extend this telephone number before redialling 31 20401541en ba a0 Comfort dialling Managing the redial list Deleting entries from the redial list oe Press the Redial softkey The first entry in the redial list is displayed a v Scroll to the desired entry using the navigation keys Opt Open the redial list administration menu by pressing the Options softkey v e Yes The display reads confirm The display briefly shows from the redial list Press the cancel key for approx 2 seconds to return to the standby mode Note The redial list is stored in the individual handset Thus all manipulations of the redial list such as deleting an entry will not be seen in other handsets which are logged on to the same base station 32 20401541en ba a0 Comfort dialling Deleting the entire redial list oe Press the Redial softkey The first entry in the redial list is displayed a v Scroll to the desired entry using the navigation keys Open the redial list administration menu by pressing the Options softkey v Select the menu entry EZ
66. t service life in standby when calling 750 mAh ca 120h ca 12h Charging time for batteries approx 18 hours Allowable ambient conditions for operation of the handset 5 C to 40 C Allowable ambient conditions for operation of the base station 5 C to 40 C 20 to 70 relative humidity Allowable storage temperature 10 C to 60 C Dialling process MFV DTMF Flash functions 250 msec 100 msec Base station dimensions Width Height Depth 121 x 102 x 84mm Handset dimensions Length Width Height 142 x 52 x 30 mm Charging bay dimensions Width Height Depth 68 x 48 x 55 mm Base station weight 148 g Weight of a handset 97 g without batteries 121 g with batteries Charging bay weight 55 g Length of the connection cord 3 m Length of the power cord 3 m Power pack Euro 20401541en ba a0 Appendix Approval This DECT Cordless telephone complies with the fundamental requirements of R amp TTE Directive 1999 5 EC and is suitable for connection and operation in the member country specified on the base station and or on the packaging CE Certification The telephone fulfils the requirements of the EU Directives Directive 99 5 EC on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity C Compliance of the telephone with the aforementioned directives is confirmed by the CE mark Warranty Conditions Your pro
67. th risk of explosion e g paintworks petrol stations etc gt Do not place the base station charging bay in bathrooms or showers The functioning of medical equipment may be affected by the radio signals Your DECT cordless telephone will not function during a power outage or when the rechargeable batteries are empty The handset must not be charged without batteries or without the battery cover present Do not touch exposed contact points c Only use the supplied power pack SNG 05 ea for the base station Disposal Dispose of the rechargeable batteries base station handset charging bay and power pack in an ecological manner 20401541en ba a0 Contents Your Avena 135 135 Duo is designed to be connected to an analogue telephone network This telephone is available either with one handset Avena 135 or as a set with two handsets and a charging bay Avena 135 Duo Safety precautions ejl cm EEUU 1 Installation EP 5 Package contents ur uy u ete tee pedi torri eteut legium o dieere 5 Additional items for Duo aaa I e 5 Finding the best lOcatlon r uu u u aus bee v nter in Ded LR E Dd 5 Positioning the base station charging bay ar a rrassrssisssa 6 WallitmOUnting et T hee Siler eda 7 Connecting the telephone em mee es ee hee en en nenne 8 Connecting the charging bay Zulu mem eme eren 9 Inserting the ba
68. the menu entry and press the OK softkey v Select the menu entry RE irs and press the OK softkey v Select the menu entry SUE UE MAR and press the OK softkey v Select the warning tone which you want to enable disable and press the OK softkey v The current status is shown e g CEE Change the setting accor ding to your preference Confirm with the OK softkey The selected setting is stored Press the cancel key for approx 2 seconds to return to the standby mode Note The key click setting applies also to all acknowledge tones e g when placing the handset back in the base station charging bay 68 20401541en ba a0 Handset settings Editing the handset name You can edit the name of the handset This helps to identify the handset e g if you have more than one handset Open the menu by pressing the Menu softkey v Select the menu entry v Select the menu entry v Select the menu entry MaE WEINE and press the OK softkey and press the OK softkey and press the OK softkey 88 You can now edit the name of this handset max 15 characters Press the key you delete the last character Switch from uppercase to lowercase characters by pressing W Press the OK softkey to confirm the changes Press the cancel key for approx 2 seconds to return to the standby mode Select the display language For the display texts you can choose between several languages
69. to send this SMS again You can edit the text as well as the destination number before sending Edit SMS Select this option if you want to edit the text of the SMS You have the choice of storing or sending the edited SMS message BSB SEs Select this option to delete this outgoing SMS Note New SMS messages will not be received if the SMS memory is full So make sure that you delete any SMS messages before all memory space is used up 63 20401541en ba a0 SMS Messages Special SMS features Many service providers offer special features for sending and receiving SMS messages Here is a selection of frequently offered features Request delivery confirmation Send SMS as a FAX Send SMS as an E mail Send SMS to a list of recipients multi message SMS forwarding Ask your service provider about the availability of such special features and any corres ponding costs charges Your Avena 135 135 Duo does not provide any dedicated menu entries for these special SMS features 64 20401541en ba a0 Prevent unauthorised use Authorised calls Only handsets which are logged on to the base station are authorised to make and receive telephone calls Persons who do not have access to your base station nor know your base station s PIN code cannot log on their handset to your base station chapter Log on the handset So even if your neighbours also have an Avena 135 135 Duo cordless telephone
70. tteries in the handset 10 Charging the batteries esed L u RE ua GRE EL oie 11 Display and keypad texte EE epos qaa IE RR kas sua 13 Display and symbols sss meme e hee en ree nn nnne 13 Handset front VIEW J Ls LU HH I mehrere 14 Handset keypad cece cece eee eee e e em e ee he ee hes ne nn rns nn EErEE 15 Base Station TrOnE VIEW u L cue bes bins ecc es ended eee Mist ondes 17 Relocating the handset paging ssssssssssssss mem 17 Making the first call ic cccscoscscsncceseaseccesesancastievecuessacsudeaendscadeuctosteadeceanaeneets 18 Switching the handset on off a e 18 Handset status at deliver guau m e cie io a n ista emet y Chou uve qe i ie 18 Switching the key lock on off 19 20401541en ba a0 Contents Set the timecand date eodera tm eo aq nasi n E ne 19 ake a telephone call sssssssssssssssss ee eene 20 Answering a telephone call 21 Ending a telephone call me 21 kxexcel cse Er 22 Handsfree callitiy ied teet rect kaq oli ide ere xtate te ded degde 22 Changing the voice volume during a call sssssssssssse 23 uting the handset a mee em ree ee rne nn nenne nnns 23 Message Lists uuu oneris eer scr opa ee Ere DR vex eek cpu eR ERO aaae Er rRE SN ME ERR NE mE REMO 24 Comfort dialling 2 iL ie usate Leer ues anes eaten 25 Dialling using the phonebook rara mee
71. warding You may individually activate or de activate Call Forwarding for the following situations CFB Call Forwarding if Busy Forward all incoming calls only if your telephone line is busy CFNR Call Forwarding when No Reply Forward all incoming call when an incoming call is not answered within a certain period of time CFU Call Forwarding Unconditional Forward all incoming calls immediately 50 20401541en ba a0 Call Forwarding Follow the procedure below to enable disable Call Forwarding Open the menu by pressing the Menu softkey v Select the menu entry SH Mix a E ws ENMEE and press the OK softkey v Select the type of Call Forwarding and press the OK softkey CF Unconditional CF if Buss CF if Ho Rerly v Select either the corresponding E or entry to enable or disable this type of Call Forwarding Press the OK softkey to confirm your selection 8 If you selected the E entry you are requested to enter the telephone number to which incoming calls will be forwarded Press the OK softkey to confirm If you selected the entry you do not have to specify the destination telephone number Your Avena 135 135 Duo will now connect to the network and send the appropriate network control code s to the network The display shows Listen to info to indicate that you may hear a spoken acknow ledge notification from the network e Press the talk key to disconnect from the
72. when the base station is reset 37 20401541en ba a0 Comfort dialling Making internal calls If you have more than one handset logged on to the base station then you can make internal telephone calls between these handsets Such internal calls are free of charge since such calls are routed over the base station but not over the telephone network Dialling an internal number Press this softkey to open the list of available internal destinations i e other handsets which are logged on to the base station Int v Select the internal destination you want to call from the list e g giae and press the OK softkey to dial this number You may end the internal call by pressing the talk key again or by placing the hand set back in the base station charging bay Note e f you are having an internal conversation then it is not possible to set up another second internal call between other handsets e The list of available internal destinations includes only other handsets which are logged on to the base station To find out which handsets are logged on to the base station press the paging key on the base station On all logged on handsets you will hear a ring tone and the handset displays read gE Ran eae 38 20401541en ba a0 Comfort dialling Callback if busy Ask your service provider about the availability and any charges for this service When the person whom you are calling is engag
73. your Avena 135 135 Duo you can enter a flash character by pressing the R key 9 This flash character is displayed on the handset as 9 Note Please ask your service provider about the exact codes and functionality for each of the available supplementary services 80 20401541en ba a0 Supplementary network services Using network services through the menu With your Avena 135 135 Duo you don t have to remember all these codes Instead you may use these supplementary network services through plain softkey or text menu selections For example if you want to set up a conference call between three parties you don t have to enter the function code which corresponds to this network service After you have set up a call to each of the other parties you simply press the Conference soft key Your Avena 135 135 Duo will lookup the corresponding code for this service and send it to the network The Avena 135 135 Duo stores codes for the following network services Service description Code Enable call waiting Disable call waiting Accept a waiting call Reject a waiting call Brokering switch between two concurrent calls Set up a conference call Enable Call Forwarding Unconditional CFU Disable Call Forwarding Unconditional CFU Enable Call Forwarding No Reply CFNR Disable Call Forwarding No Reply CFNR Enable Call Forwarding on Busy CFB Disable Call F

Avena 135/135 Duo

Contents

Download Pdf Manuals

Related Search

Related Contents