Plus 5kg User Manual..
Contents
1. flat non vibrating surface Weighing an Item 4o 08 Press the E key The number J aL will appear on the display for a short time while the scale performs a self checking zero routine and then A U U N S displays on the LCD Leave it ON like this for about 30 seconds before weighing Your scale is now ready to weigh an item Place an item on the scale and the weight will display on the LCD in grams Use of the TARE ZERO Function 1 To reset the scale to read 0 press the ES key 2 When you wish to weigh only the contents of a container you can remove the weight of the container from the display by pressing the key as follows Place the container on the scale and press the EI key The scale should now display Then place the item or material to be weigh into the container The scale will now show the weight of the item or material in the container and exclude the weight of the container Error Messages m If an EE E a appears in the display this means that the weight capacity of the scale has been exceeded in fa LU symbol appears in the display during start up this means that the input voltage of the scale is not sufficient lt 7V Operating Temperature The scale is designed to operate in normal room temperatures If subjected cold or warm temperatures it should be allowed to reach room temperature before operating2. Scale Calibration In case the scale loses it s accuracy re calibration of the scale may be needed The scale calibration should only be done if the user has all the weight sets and should be conducted in a very calm and vibration free environment The calibration points of these scales are 1 6kg 3 2kg and 4 8kg Unpack the scale and if the scale came from a colder or warmer environment let it adapt for sometime to the current environment before using Plug in the DC power supply at the back of the scale Press the ON key and hold it for about 6 8 seconds the scale will enter the calibration mode model select mode first E0 will be displayed on the LCD Press the ON key gently to change the scale model within 5 seconds the EO is displayed the display will change from E0 to E1 Press again until the E5 is displayed on the LCD E5 is calibration mode of this 5kg scale Once the E5 is displayed on the LCD wait until it displays the base frequency The base frequency without anything on the platform should be between 50 250 1 will be displayed put 1 6kg on the platform and wait until 2 will be displayed Remove the weights and place 3 2 kg on the platform and wait After 3 appears on the display remove the weights on the platform and place 4 8kg An E appears on the display indicating the end of the calibration Turn Scale Off Calibration is completed Note The calibratio
3. n should not be continued if you don t have all the proper weights needed for the whole calibration procedure ELANE Plus 5kg Electronic Postal Scale With fold up platform for weighing large letters Max 5000g d 1g Operating Manual Technical Details o S VY S E VY Tare up to the scale s overload range Operates either on a 9V alkaline battery not supplied or 9V AC power adapter supplied Load cell technology Liquid crystal 7 segment 4 digits display Capacity 5000g Minimum add on weight 1g Auto switch off after 5 minutes of non use in battery operation Four points automatic calibration Unpacking and assembling your scale Unpack the scale from gift box and take out the scale from the plastic bag The scale needs a warm up time of 2 3 minutes upon turn ON for the first time after that it needs to be switched OFF Turn the scale ON again for use Using the scale with battery You will need one 9V Alkaline leak proof battery Remove the battery compartment cover at the base of the scale and insert the battery with the proper orientation Replace the battery compartment cover Using Scale with proper adaptor Connect the supplied power adapter to the input socket at the rear of the scale and plug it into the power supply It is advisable to remove the battery when using power adapter Operate on a Firm Flat Level surface In order to operate correctly the scale must be installed on a firm level
Download Pdf Manuals
Related Search