MODEL: BDV7186 USER MANUAL
Contents
1. control sensor No picture or sound Check that the A V cables are securely connected Check that the disc is a DVD region number 1 or all DVD RW or AUDIO CD Do not use a disc that has scratches or dirt Check that the label side of the disc is facing up The pick up lens of the DVD player may be dirty Contact the service center for lens cleaning Check that the TV channel is set to VIDEO or AV if viewing with a TV No picture Check that the LCD display is turned on No sound No picture and sound Check that the display panel is open If it is closed audio will not be output to the speakers Check the volume setting If set to zero turn up volume level Check that the headphones are plugged into the PHONES socket Speakers cannot be used with the headphones Check that the battery is properly installed and AC Adapter is properly connected Distorted video or sound Use a disc without scratches or dents ETEC LIMITED 90 DAY WARRANTY We warrant this product to be free from defects in material and workmanship under normal use for a 90 day period after purchase We will repair or replace the unit free of charge should it become defective under this warranty providing you submit proof of purchase sales slip along with the unit and all accessories During the initial 90 day period after original purchase we will service or exchange at no charge To obtain warranty service or replacement withi2. CreEc MODEL BDV7186 7 DVD BOOMBOX WITH CD AM FM STEREO AND REMOTE USER MANUAL PLAY BACK VIDEO DIGITAL AUDIO Before attempting to nect opera bei st this player please read these instructions completely And then put this manual in a safe place for oe e reference Illustration of the Controls Jacks On the Main Unit 21 22 23 15 341617 18 3319 15 1 35 7 91011 121314864 2 20 31 27 28 26 1 FUNCTION CONTROL 19 LCD DISPLAY 2 BAND CONTROL 20 HANDLE 3 VOLUME CONTROL 21 POWER INDICATOR 4 TUNING CONTROL 22 REMOTE SENSOR 5 MODE BUTTON 23 FM STEREO SIGNAL INDICATOR 6 FAST FORWARD BUTTON 24 TELESCOPIC ANTENNA 7 PREVIOUS BUTTON 25 VIDEO OUTPUT JACK 8 PLAY PAUSE BUTTON 26 AUDIO OUTPUT RIGHT JACK 9 NEXT BUTTON 27 AC SOCKET 10 BASS BOOST BUTTON 28 HEADPHONES JACK 11 CD DOOR 29 BATTERY COMPARTMENT 12 CD DOOR OPEN TAB 30 AC VOLTAGE SELECTOR FOR DUAL VOLTAGE 13 FAST REVERSE BUTTON VERSION AND AT BOTTOM OF UNIT OPTIONAL 14 STOP BUTTON 31 DISPLAY ON OFF SWITCH 15 SPEAKERS 32 AUDIO OUTPUT LEFT JACK 16 MICROPHONE INPUT 33 SD MMC CARD SLOT 17 MICROPHONE LEVEL 34 3 5mm AUX IN JACK 18 USB 2 0 PORT gt The AC plug is used as disconnect device the disconnect device shall remain readily operable gt The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the appar
3. atus Remote control unit DISPLAY TITLE MENU SETUP i Connecting to a TV set 11 To power outlet 12 13 AC power cord To video input connector yellow 15 To audio input connectors red white Video audio cable CONNECTING MICROPHONE 1 DISPLAY button 11 MENU button 2 TITLE button 12 STOP button AN D H EADPHON E 3 PREV amp F REV button 13 SLOW button 1 Connect the Microphone 4 NEXT amp F FWD button 14 OK PLAY PAUSE button j 5 NAVIGATION buttons 15 SUBTITLE button e Connect one Microphone to MIC jack 6 NUMERIC buttons 16 AUDIO button 7 ANGLE button 17 SEARCH button 2 Adjust the MIC Volume to proper level that you 8 PROGRAM button 18 REPEAT button want 9 MUTE button 19 ZOOM button 10 SETUP button 20 CLEAR button 3 Connect one headphone to phone jack Basic connection It is recommended to be connected to a multi system TV e Ensure that this player and other equipment to be connected to the unit are in the standby or off mode and disconnect the AC power cords before commencing connection e Do not block ventilation holes of any piece of the equipment and arrange them so that air can circulate freely e Read through the instructions before connecting other equipment e Ensure that you observe the color coding when connecting audio video cables Important e When playing a DVD be sure the LCD display switch is in the ON position o
4. button during playback to display the number of angles being played and then select a desired angle to view the scene Note only the DVDs shot with multi angle scenes have this function CHANGING SUBTITLE LANGUAGE DVD ONLY Press SUBTITLE button during playback the subtitle language shown on the screen will change as a response to each press When the desired language appears release the button to view the subtitle in that language Note this function only works on the DVDs recorded with multi language subtitles During playback press MENU button to return to main menu DVD TITLE button Play the title DVD PLAYING A MP3 AUDIO OR MPEG4 VIDEO DISC 1 Load the MP3 MPEG 4 disc onto the disc tray and the TV screen will show all its folders after a few seconds 2 Select the folder you want by the navigation buttons and then press OK button to confirm 3 The files in this folder are displayed and select your favorable song via navigation buttons and press OK button to start playback 4 Press NEXT and PREV button to select track directly 5 Press REPEAT button change play mode REPEAT 1 repeat one file REPEAT DIR repeat all tracks in the current album REPEAT ALL repeat all tracks in current disc REPEAT OFF cancel repeat modes KODAK PICTURE CD JPEG CD PLAYBACK Slide show of Kodak Picture CD after being loaded begins automatically Folders of JPEG picture CD after being loaded are displayed on the TV screen
5. ction when STOP is pressed in STOP mode press PLAY button again playback resumes at the point it stopped previously open the disc tray or press the STOP button one more time to clear the resume function SLOW MOTION PLAY DVD Press SLOW button on the remote control during playback the disc will be played at 1 2 normal speed at first each time this button is pressed the play speed becomes slower down to 1 7 normal speed Press PLAY button normal play will resume REPEAT BUTTON Press REPEAT button during play it will repeat play one chapter title or repeat all for DVD disc or repeat play a track or all tracks for CD or repeat the the specified points A B SEARCH FOR PREFERRED SCENE 1 Press SEARCH button during play and highlight the item to be played Title Chapter or Chapter time by navigation buttons 2 Input the desired number or time via the numeric buttons 3 Press OK button to confirm and the playback from the located scene starts 4 To exit search menu press SEARCH button directly PROGRAM PLAY UP TO 16 MEMORIES 1 Press PROGRAM during playback to display the program menu 2 Select location s to be memorized via navigation buttons and then enter desired Titles Chapters numbers via numeric buttons Note Inputting leading zero is not necessary Example Track 3 press 3 Track 12 press 1 and then 2 Track 21 press 2 and then 1 3 To start programmed playback select PLAY on the me
6. f the picture 6 SLIDE SHOW TRANSITION MODES During slide show playback press the PROGRAM button to cycle through to select one of the following modes to play WIPE TOP WIPE BOTTOM WIPE LEFT WIPE RIGHT DIAGONAL WIPE LEFT TOP DIAGONAL WIPE RIGHT TOP DIAGONAL WIPE LEFT BOTTOM DIAGONAL WIPE RIGHT BOTTOM EXTEND FROM CENTER H EXTEND FROM CENTER V COMPRESS TO CENTER H COMPRESS TO CENTER V WINDOW H WINDOW V WIPE FROM EDGE TO CENTER RANDOM NONE COLOR AND BRIGHTNESS ADJUSTMENT FOR THE LCD SCREEN Press MODE button once on the main unit to switch the function between USB CARD and DVD press and hold MODE button to adjust the color intensity brightness and contrast respectively and use skip buttons to adjust EXTERNAL MEMORY MEDIA OPERATION USB MMC Prepare the player for External Memory media operation Insert a USB data traveller into the USB port and slide the FUNCTION to the DVD position Press MODE button on the main unit continuously until the player enters USB mode An icon of READING shows in the LCD and after the USB is successfully detected and read the track number as a total shows in the LCD Press PLAY PAUSE button to begin playback from track Number 1 NOTE The player can successfully play the music files with USB 1 0 and USB 2 0 storage device OR Insert an SD MMC card into the card slot Press MODE button on the main unit continuously until the player enters SD MMC mode INITIAL SETTINGS Initial setti
7. ions 0 2 4 6 8 10 12 4 SPEAKER SETUP SPEAKER SETUP DOWNMIX EXIT SETUP 4 1 DOWNMIX Options LT RT Left Right mix mode STEREO Select this option if you don t have a 5 1 channels amplifier RADIO OPERATION TO PLAY THE RADIO Turn the FUNCTION CONTROL to the RADIO position the POWER Indicator will light up 2 Select the desired band with the BAND switch 3 Tune to the desired station by rotating the TUNING control Move the control back and forth until you get the strongest clearest sound 4 The built in AM antenna and external FM TELESCOPIC ANTENNAare directional When receiving an FM broadcast fully extend the TELESCOPIC ANTENNA and position for the best reception For AM broadcasts rotate the whole set until the best reception is heard 5 Adjust the volume level to a comfortable listening level 6 To turn off the radio turn the FUNCTION switch to OFF position NOTES If a particular FM STEREO station is weak or you hear too much background noise try moving the position of the band selector switch to the FM MONO position This can often result in a much clearer reception When the band selector switch is set to FM STEREO and a stereo broadcast is being received the FM STEREO indicator on the top of the unit will be lit STEREO HEADPHONE JACK Astereo headphone jack has been provided on the back of the unit so that you can listen to the unit without disturbing others To use
8. n the duration of the 90 day warranty return the product freight prepaid to the address below ETEC USA 823 Old Settlers Trail Suite 100 Hopkins Minnesota 55343 Please enclose a copy of the sales receipt with the date of purchase and provide a detailed description of the problem Failure to enclose required information will result in delay of your shipment Please allow 4 6 weeks for product service or replacement This warranty does not cover any product which has been subject to damage due to an act of nature misuse neglect accident abuse commercial use or modification of or to any part of the product including the antenna Damage to external devices such as speakers and other memory devices are not covered nor is the cost incurred in shipping the unit for warranty repair Under no circumstances shall ETEC USA be liable for any loss direct indirect incidental foreseen unforeseen special or consequential or for any damage arising out of or in connection with the use of this product UNDER NO CIRCUMSTANCES WILL ETEC USA BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES This warranty does not cover re manufactured units or product sold As Is This warranty is valid only in the United States and grants specific legal rights
9. ngs page is for you to make your preferred settings up for your player Once the initial settings are done they are retained in the internal memory of the player until otherwise modified COMMON PROCEDURES FOR INITIAL SETTINGS 1 Press SETUP button 2 Use the navigation buttons to select the menu item you want to modify press OK button to confirm 3 Sub menu settings will be displayed on the screen 4 Use the navigation buttons to make these change press OK to confirm 5 Use navigation buttons to switch to another menu selection on the main setting page 6 Press SETUP button to exit 1 SYSTEM SETUP SYSTEM SETUP TV SYSTEM LCD MODE TV TYPE PASSWORD RATING DEFAULT EXIT SETUP 1 1 TV SYSTEM itis used to select the TV mode Options NTSC PAL AUTO Please select this option as per your TV set 1 2 LCD MODE It is used to select the LCD MODE Options 4 3 or 16 9 1 3 TV TYPE it is used to select the TV scan mode please set as per your TV set Options 4 3PS Normal Pan amp scan mode 4 3LB Normal Letter box mode 16 9 16 9 wide screen mode 1 4 PASSWORD input password to unlock the system The steps are as follows 1 4 1 Enter SYSTEM SETUP select the PASSWORD item by scrolling the down navigation button and then press the right navigation button to select the input box 1 4 2 Input user s password 0000 to unlock it in this case select the input box again to change the password by inputting a
10. nother new four numeric numbers and then press SELECT button to confirm When the password is changed you need to input the new one to unlock the system 1 4 3 If you forget your own password use the master password 8200 to unlock it NOTE If wrong password was input in unlock status the system will lock 1 5 RATING Set the rating of this player If you want to change the rating of parental lock please input the password to unlock first Options 1 KID SAFE 2 G 3 PG 4 PG 13 5 PG R 6R 7 NC 17 8 ADULT 1 6 DEFAULT Reset to factory settings Options RESTORE 2 LANGUAGE SETUP LANGUAGE SETUP OSD LANGUAGE AUDIO LANG SUBTITLE LANG MENU LANG EXIT SETUP 2 1 OSD LANGUAGE It is used to select different On Screen Display language for different user 2 2 AUDIO LANG select preferred audio language DVD only need disc software support 2 3 SUBTITLE LANG Select preferred subtitle language DVD only need disc software support 2 4 MENU LANG Select preferred disc menu language DVD only need disc software support 3 VIDEO SETUP VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION EXIT SETUP 3 1 BRIGHTNESS to set the brightness for the display Options 0 2 4 6 8 10 12 3 2 CONTRAST to set the contrast effect for display Options 0 2 4 6 8 10 12 3 3 HUE to set the color impression for display Options 6 4 2 0 2 4 6 3 4 SATURATION to set the saturation level for display Opt
11. nu pressing PROGRAM button again to exit programming 4 To clear programmed items select the items and then press CLEAR button on the menu To clear all items select the lt CLEAR gt on the menu and then press OK button on remote control 5 You can also cancel program mode by clearing all the items in the program menu ZOOM PLAY Press the ZOOM key continuously to zoom in the picture by 2 3 and 4 times zoom out by 1 2 1 3 1 4 normal size Press this key once more when the picture is at 1 4 size to return to the normal size display Scroll to view the enlarged picture using Navigation buttons ON SCREEN DISPLAY INFORMATION When the player is in operation press DISPLAY button continuously on the remote control the screen will display parts of information current disc type title number chapter number playtime audio language audio type subtitle language and multi angle etc in a sequence CHANGING AUDIO SOUNDTRACK LANGUAGE DVD It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings This operation works only with discs on which multiple audio soundtrack languages are recorded e Press AUDIO button during DVD disc play the sound track language changes with the current sound track number shown on the TV screen NOTE When no soundtrack languages are recorded pressing this button will not work MULTI ANGLE VIEWING DVD ONLY Press ANGLE
12. r no picture will be seen Note e During DVD play the TV volume may be at a lower level than during TV broadcasts etc If this is the case adjust the volume to the desired level e f the DVD CD player is connected to the TV through a video cassette recorder the picture may not be viewed normally on some DVDs If this is the case do not connect the player via the VCR OPERATIONS PREPARATION Power on the TV set and select video input mode Power on the audio system which is connected to the player GET STARTED 1 Turn on the player and switch the FUNCTION CONTROL to DVD CD AUX position 2 Lift open the disc tray 3 Place a disc onto the disc tray 4 Press the cover closed and playback starts automatically 5 When a menu screen appears on the TV move the navigation buttons or press the numeric buttons to select a preferred track number then press OK button to start playback ADJUSTING THE VOLUME Manually turn the VOLUME control to increase or decrease the volume SKIP AHEAD OR BACK Press NEXT SKIP or PREV SKIP button once during play to skip a chapter DVD or a track CD ahead or backwards RAPID ADVANCE REVERSE During playback press and hold the F FWD button or F REV button several times to scan the disc forward or backward at 2X 4X 8X 20X normal speed Press PLAY button to resume normal play STOP PLAYBACK Press STOP button during playback to stop playback the player activates its resume fun
13. this jack plug in the headphones earphones not included and adjust the VOLUME control to a comfortable listening level NOTE When external headphones earphones are connected the sound to the unit s main speakers will be muted DISC HANDLING PRECAUTIONS C A e Hold the disc by the edge so the surface will not be soiled with finger prints Finger prints dirt and scratches can cause skipping and distortion e Do not write on the label side with a ball point pen or other writing utensils Do not apply benzene thinner and liquid that prevents against static electricity Be careful not to drop or bend the disc Install only one disc on the disc tray e Do not try to close the disc tray when the disc is not installed properly T x o e Be sure to store the disc in it s case when not in use TROUBLESHOOTING If your DVD player does not seem to be functioning properly check the items below before you contact an authorized service center Symptom Check Power does not turn on or suddenly turns off Make sure the AC cord is securely plugged into an AC outlet Turn the power off and then back on Remote control won t work Check that the battery is inserted in the and direction properly The battery may be flat Replace it with a new one Check that the signal transmission is directed at the remote control sensor on the DVD player Remove the obstacle between the remote controller and remote
14. use the navigation buttons to select the desired folder and then press OK button to confirm The files in this folder are displayed and you can select your favorite pictures using the up down navigation buttons and press OK button to start playback Preview of the picture will be displayed while you scroll across the file names KODAK PICTURE CD JPEG CD OPERATIONS 1 PLAY MODES Press REPEAT button during play to change the play modes REPEAT 1 repeat one file REPEAT DIR repeat all pictures in the current album REPEAT ALL repeat all pictures in current disc REPEAT OFF cancel repeat modes During playback press STOP to enter preview mode 2 SKIP TO NEXT PREVIOUS PICTURE Press NEXT button to skip to the next picture or PREV button to the previous picture If no key is pressed for a few seconds it will skip to next picture automatically 3 PICTURE ROTATIONS Press RIGHT and LEFT navigation buttons to rotate the picture Clockwise and anti clockwise respectively 4 PICTURE FLIPS Press UP navigation button to flip the picture vertically Press DOWN navigation button to flip the picture horizontally 5 PICTURE ZOOM IN OUT Press ZOOM button continuously the picture zooms in by 2 3 4 times or zooms out by 1 2 1 3 1 4 the original size Press this button once more when the picture getting 1 4 size to return to the normal play If the picture is enlarged you may use the navigation buttons to view blocked parts o
Download Pdf Manuals
Related Search