M2-A Agitatore magnetico riscaldante analogico
Contents
1. C Pay attention even when the longer e Make sure the wall outlet have a proper grounding l l e Make sure the power switch is turned off e Before use make sure the instrument is connected to an l e Connect the network cable outlet with a ground connection l o l e Place the solution you want to mix in a bowl with the bar magnet 3 Controls e Place the container on the plate of the instrument e Set the stirring speed and let it go e Observe the bar magnet and the LCD display e Set the desired temperature and start to heat e Observe the actual temperature on the LCD Stop stirring and heating If the above operations were carried out in a normal way the device is ready for operation Otherwise the device may have been damaged during transport please Heating contact the manufacturer for technical support LED Stirring 5 Work with external temperature probe LED If the external temperature sensor is connected and the heating control knob is rotated the display shows the set temperature and the actual value to vary in 5 seconds An Heating knob Stipri l s Stirring knob automatic comparison between the temperature of the plate and that detected by the external probe allows a more precise control of the temperature of the sample If you need the external temperature probe you should connect it before turning the instrument Make sure that the outside temperature sensor is properly connected and incl2. heating temperature 0 5 C Safety temperature limit 580 C External temperature probe PT1000 Control accuracy of heating temperature with 0 5 C external temperature probe Dimensions W x D x H 215x360x112 mm Weight 4 5 kg Permitted ambient temperature 5 40 C Permitted relative humidity 80 Protection class IP IP21 Voltage Frequency 220V 50 60Hz Max stirring quantity H20 10 litri Max magnetic bar 80 mm 9 Disposal electronic equipment European Union the side cannot be disposed of in landfills Information regarding the disposal of electrical and Electrical and electronic equipment marked with the symbol on In accordance with EU Directive 2002 96 EC the European users of electrical and electronic equipment have the opportunity to give back to the distributor or manufacturer upon purchase of a new one The illegal disposal of electrical and electronic equipment is punished with an administrative fine
3. ARGO LAB M3 D Digital glass ceramic hotplate magnetic stirrer User manual 1 Warranty Thank you for purchasing an instrument Argo Lab This instrument is warranted under The sted sinchonds switched ON or OFF bysolatine the normal use for a period of 24 months from the date of purchase Speed control Knob knob a ane a eee aka a OS l Aa eee appo Temperature control The heating function is switched ON or OFF by rotating the any product or parts of it that have been damaged due to incorrect installation improper knob knob connections improper use accident or abnormal conditions of operation i l l aa l If rotate the heating knob LED displays the temperature The manufacturer declines all responsibility for damage caused by failure to follow l l l l l Sunan setting value and shift to real value in the duration of 5 instructions lack of maintenance and any unauthorized modification LED seconds 2 Safety instructions When the heating function is switched ON the LED Heat LED Heat flash ash LED Stir When the instrument is switched ON the LED Stir is lit e Read the instructions carefully before use e Ensure that only qualified personnel using this tool e Do not heat flammable or highly volatile substances e Be very careful when you touch the heater plate It can 4 Trial run power hasbeen undo beme hepe cays honeven e Ensure that the mains voltage corresponds to the supply required reach a temperature of 340
4. uded in the sample before heating 6 Maintenance and Cleaning e A Proper maintenance of the instrument guarantees the condition and extend its life e Unplug the power cord before cleaning e When cleaning be careful not to spray the cleaner inside the instrument e Use only mild detergent and do not contain abrasives e Before starting with any cleaning or decontamination the user must ensure that the method used does not damage the instrument e Wear suitable protection when cleaning with chemicals e If the instrument must be returned for service it is necessary to provide for proper cleaning and possible decontamination by pathogens of the same You should also put the instrument in its original packaging to send it to service center 7 Associated standards and regulations Construction in accordance with the following safety standards EN 61010 1 UL 3101 1 CAN CSA C22 2 1010 1 EN 61010 2 10 Construction in accordance with the following EMC standards EN 61326 1 Associated EU guidelines EMC guidelines 89 336 EWG Machine guidelines 73 023 EWG Technical datasheet Speed range 0 1 500 rpm Speed indication Digital display LCD Hotplate material Glass ceramic Hotplate dimensions 184 x 184 mm Power 1000 W Heating rate 6 C min Temnperature Range RT to 550 C Temperature indication Digital display LCD Temperature display accuracy EE Control accuracy of
Download Pdf Manuals
Related Search