Home
        User Manual - Jackco Transnational Inc.
         Contents
1.    30 60 sec     B   Allow 30 60 seconds   for the speakers to pair  with each other  Once it is  paired Bluetooth indicator  will blink slowly and  accompanied by a ringtone     3  Pair with Device       Press the  8  button on one  of the speakers to pair with  your bluetooth device     4  Complete Pairing                                  Turn on Bluetooth and  search for    Sound    and  click    Pair     Play music to  confirm that the pairing  process is complete  If  not  repeat the process     H  Troubleshooting    No audio from the Sound  speakers    e Check if the Bluetooth device and Sound     speakers are powered on and paired  Increase  volume from your Bluetooth device        Music playing through the speaker is  intermittent    e Make sure the distance between the  Bluetooth device and the Sound    speaker is  within the 30 foot range  or check if there  are any device equipment that generates  electromagnetic interference        A beep is heard during music play       e Battery is low  turn off speakers and recharge  the battery        10    11    Problem    Music is intermittent  when the Sound   is connected to Apple devices  i e  Apple  iPad  iPhone  iPod     Solution    e Restart the pairing process again  and check     forget this device    in the Bluetooth setting   iOS is able to pair with 2 separate Bluetooth  devices at the same time  If there are 2  devices connected to one Apple Bluetooth  device at the same time  signal interference  will occur  To 
2. Sound    bygJackco     ZT51000       User Manual          Product Layout    Microphone Battery Indicator    Power Button  amp  Answer End Call       r  Bluetooth Indicator                                                          r     Bluetooth   Pairing  Bottom  Magnetic Base  O   ES  2  0 Sound  pz  LEE  Charging Port    gu  AUX Input    Front Back       Table of Contents  Product LayO U    N 3sn nu H4  nd   nanan n nnn  dubn 1  Introduction       Connecting via 3 5mm AUX in input             8    Recharging Battery    escssescccssscsseesccsneeecsseeees 8  Factory Reset Pairing Procedure                     9  Troubleshooting               4               44c     n    Technical Specifications  a  FOC NOTICE k  n   nen   nA Ken Raa eni in   Environmental Protection                               14  Lithium Battery Caring Tip                              14  War AT   Ly   na d  nyaye bl   ye eine d      reda Ker      dek   15       Contents of the box    Sound    Bluetooth Speakers  USB Charging Cable  3 5mm audio input cable  Carrying Pouch    A  Introduction     Sound    by Jackco is a pair of Bluetooth  speakers  Unique in a way that lets  you cut the cord and enjoy true stereo  music on the go  Connect to your  smartphones  tablets  iPods  or laptops    and just hit        B  Features    e Two speakers wirelessly connected via Bluetooth   e 2 0 ch High Fidelity Stereo Sound   e Each speaker can be used separately   e Built in Microphone for phone calls and video conferenc
3. avoid this when pairing with  the speakers again  please turn off other  unused Bluetooth devices        Poor sound quality or sound is distorted        Lower the music volume  or if speakers are  playing through the AUX line  make sure the  line is fully plugged in        Problem Solution    Only one speaker has sound e The Sound    speakers are not properly paired   Please power off both speakers and refer  back to Section D  set up to start the pairing  procedures again  The Sound    speaker  should pair each other first  then with the  Bluetooth device        Only one speaker has sound  both e This shows that the 2 speakers paired with  speakers have solid on Bluetooth 2 different Bluetooth devices  Please turn  indicator  off other prior paired Bluetooth devices  i e   phone or tablet within the 30ft vicinity   Then  restart the pairing procedures again  refer to  quick start guide section D in manual            Note  If your question has not been answered  please refer to our website for more information  www jackco com 12    l  Technical Specifications       Dimensions  Detached     2 45 L x 2 45  W x 3 3   H                                     J  FCC Notice    This device complies with part 15 of the    Charge Current 300mA   Charge Voltage 5V DC   Battery Lithium polymer 800 mAh   Working Temperature  4  F   113  F   20  C   45  C    Working Humidity 5    95    Working Hours  About 6 hours  at 60  volume   Working hours are dependent on the  Range 30 ft  speaker volu
4. ck either one of the devices to pair      Press and hold  Bluetooth Pairing  can cancel pairing with cell phone    If your device prompts you for a passcode  please enter 0000     Taking Calls with your Sound    connected to your phone     When your phone receives an incoming call  a ring tone alert will come from your Sound    speaker     e To accept a call    Press the  1   Power Button  on the master speaker     e To end a call  K      Press the    Power Button  on the master speaker                    To reject a call or use call waiting feature  please revert to your phone controls     E  Connecting to SOUND via 3 5mm AUX input     You can use Sound    speakers for music play with any device that has 3 5mm Audio out port   Simply plug in the 3 5mm cable  included  into the speaker and into your device then play  music     F  Recharging Battery     Connect the provided USB cable to the charging port on the  speakers and a USB charging block  Battery Indicator glows red 0    amp   when battery is charging  and indicator changes to green when  battery is full        The charging time is approximately 3 hours from an empty battery             G  Factory Reset Pairing Procedure     1  Power On       4sec        Press and hold    for  4 seconds to power on  the speakers    2  Pairing Speakers    Note  Please turn off the Bluetooth  connectivity on your device     A   Press   again on  both speakers  Bluetooth  Indicator will be fast  blinking accompanied by a  ringtone        
5. ing   e AUX input   e Rechargeable lithium battery   e Magnetic base allows you to attach the speakers to steel surfaces    Sound    supports the following standards   Bluetooth 2 1    Advanced Audio Distribution profile  A2DP    Hands free Audio  HFP  and Headset Profiles  HSP  for hands free calling capability   Audio Video Remote Control Profile  AVRCP  for wireless audio and video playback control    C  Safety Information   e Do not expose the speakers to rain  moisture or any liquid  Exposure to liquid or moisture may cause  the speakers to fail and increase the risk of electrical shock or fire    e Do not expose the speakers to open flame  such as candles  camp f  re  etc    e Under no circumstances should the users make any change or modification to the product or its  accessories  Any changes made may compromise safety  affect the performance of the product and  void the warranty    e Incase the battery begins to leak  do not allow your body parts to come in contact with the liquid  If  contact has been made  please wash with plenty of water and seek medical advice    e Do Not expose the product to excessive heat  such as inside a car under direct sunlight where  temperature may exceed 140  F  60  C  degrees  Battery under extreme heat may generate more  heat  rupture  or ignite  Storing the speakers under such condition may result in degradation in  performance and shorter battery life    e This product contains magnets  which can be harmful to persons wearing pacema
6. ker    e Hearing damage can result from prolong exposure to loud music  please turn down the volume    e The speakers contains lithium batteries  please dispose the speakers properly  following local  regulations  Do not incinerate     D  Set up  Turning the Speakers On and Off     1  Power on  Lightly press and hold O  Power Button  of both speakers at the same time for 4  seconds  Bluetooth Indicator will start blinking and accompanied by power on ring tone        2  Power off  Lightly press and hold        Power Button  of one speaker for 4  seconds  Bluetooth indicator will stop  blinking and accompanied with power off  ring tone     Pairing with Bluetooth Equipped Device     1  Pairing the 2 speakers  Press and hold     Power Button  of both speakers until power is on   it will enter pairing mode for 10 30 seconds  and accompanied by the Bluetooth indicator  fast blinking  Once it is paired  Bluetooth indicator will blink slowly and accompanied by a ring  tone  Pairing time will vary depending on external interference     2  Press the  Bluetooth Pairing  once  it will enter into paring mode with cell phone or  Bluetooth device  When the speakers have paired with your device successfully  you be  prompted with a ring tone  On one speaker Bluetooth indicator becomes solid on  Master  Left  Channel   while the other speaker will blink on off once every 3 seconds  Slave  Right Channel      Note  You may see two Sound    devices on your Apple iPhone  iPad  or iPod  You can pi
7. me  The working hours at  Bluetooth Version 2 1 EDR  A2DP  AVRCP  HSP  HFP   max volume decreases significantly   Output Power 3W   3W       FCC rules  Operation is subject to the following two conditions   1  This device may    not cause harmful interference and  2  this device must accept any interference received  including interference that may  cause undesired operation  FCC ID  2ACZPZT51000    13    K  Environmental Protection     X Do not dispose of the product with household waste   XK Do not incinerate  Keep away from fire     L  Lithium Battery Caring Tips    e This product uses the micro USB charge port  and built in lithium battery  We recommend that the  battery is fully charged and discharged during first three uses to ensure the battery is in it s best  performance     e When charging is complete  unplug the USB cable on the speakers     e Please do not place the Sound    speaker in extreme environments  The speakers perform best when  operating at room temperature  70   F  20   C      14    Sound    by  Jackco       Limited Six  6  Month Warranty    Jackco Transnational Inc  warrants    SOUND  by JACKCO    branded products to the original purchaser against any manufacturing defect in  material or worksmanship for a period of six  6  months from the original date of purchase  If the defective product is determined to be  covered under this warranty  it shall be repaired or replaced at manufacturer s discretion without charge  Provided that the product must  be 
8. returned with proof of purchase and freight prepaid when returned to the manufacturer  This warranty shall not apply to damage due  to accident  negligent use  lack of maintainance  abuse or applications other than the specific function the product is designed for     No other warranties  expressed or implied  including those of merchantability or fitness for particular purpose shall be applicable to  Jackco except as specifically stated herein  In no event shall Jackco be liable to any party for any special  direct  indirect  consequential   punitive damage of any nature caused by the sale or use of the equipment  tool  or product    Note  This warranty gives the original purchaser specific legal rights which may vary from state to state     Please visit our website at www jackco com warranty html to submit your RMA request        iPad  iPhone  and iPod are trademarks of Apple Inc   registered in the U S  and other countries  The Bluetooth word mark and  logos are owned by the Bluetooth SIG  Inc  Other trademarks and trade names are those of their respective owners     2014V5    
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
GV-DSP LPR - Tecnosinergia  Samsung SL-M4530ND Felhasználói kézikönyv  Guía del Usuario  PRACTICA ISII 2004-2005  EXCLUSIVAMENTE PARA PESSOAL DE SERVIÇO  GE Profile PGS908SEPSS User's Manual  Bedienungsanleitung Sony-Ericsson W580i  Bosch 2609256258  D-Link Omni-directional Outdoor Antenna  Chromol - Ecolab Suisse    Copyright © All rights reserved. 
   Failed to retrieve file