MPEG4 Mobile DVR User Manual
Contents
1. Setup Operation nstruction When the administrator enters into the setup manual the screen will show following menu selections System Quick Setup Schedule Event Setup PTZ NEED ue Setup Schedule Event Setup PTZ Left Right navigates the items and choose item by pressing the Enter or Menu button ESC takes back to the Channel Monitor screen System Enter into this item and the screen will show as below NEED cu Setup Schedule Event Setup PTZ Date Time e 08 09 2004 Wednesday Unit ID 18 00 30 Video Type Date ode mmidd yyyy Audio Record Weekday Start MON HDD O W Weekday End FRI HDD Format Network Security Default Setup 1 Date Time highlight with this item and enter into it u Date DD MM YYYY gt DD Date MM Month YYYY Year u Time HH MM SS gt HH Hour MM Minutes SS Second u Date Mode in two options dd mm yyyy or yyyy mm yy J ust moves the cursor on it and press ENTER button to change u Weekend Start From Sunday to Monday u Weekend End From Sunday to Monday u Press Apply or ENTER button when exiting to the NORMAL RECORDING screen to save current selections 2 Unit ID changing the ID from 000 to 999 this ID used for the login identification while user operate more than 1 unit at the same time so that this ID good for using remote control with many DVR 3 Video Type select this into two options PAL and NTSC then press Apply to c2. and change the setting value in this menu the new setting replaces the previous setting 2 Event Record This menu is to set the detailed event recording conditions It is necessary to set the Event Record menu to YES in Quick Setup to enable the DVR to record events after the recording conditions are set iv Event Setup Enter into this item and the screen will show as below 16 MPEG4 Mobil DVR User Manual Operation Instruction System Quick Setup Schedule h Event Setup PTZ Sensor ALL CH N O Motion Detect Configuration press Enter for selection Timing Setup gt a 1 Sensor This menu is to set the presence and types of input sensor The sensors support two types Normal Open N O and Normal Close N C This indicates the status of recording conditions If you set the recording conditions only to All Ch Macro Setup is displayed If you change any one of the individual sensor settings Customer Setup is displayed ALL CH Sets all sensors to the same conditions Select from Off N O N C and press the Apply button 2 Motion Detection Sets all cameras to the same conditions Select from OFF NR AR Sets the CH MD Area You can directly set the MD Area on the screen Press the AREA button and a setup window divided into 64 cells 8 by 8 is displayed Select the desired MD Areas using the arrow buttons and sets MD sensitivities from 1 to 16 levels 1 is the h
3. Compact Flash card Re Pressing CF card button in remote control or front panel this will stop copying F1 operation instruction The menu is for time select while in playback mode F2 operation instruction In the main surveillance mode change it into a single play mode and press F2 button into the platform control menu 1 2 3 4 F Vv Up Down directional keys lt p gt Left Right directional keys press Enter button to back to the normal status Zoom Zoom for zooming adjustment Brightness Brightness for brightness adjustment Auto for auto mode activates 3 Mask area setting operation instruction this function is for mask area 22 MPEG4 Mobil DVR User Manual Operation Instruction vi setting After login then changed the main screen into a single play mode Press F3 button to startup the mask setting press Enter button there is a piece of White Square on the screen using the directional key to move it and press Enter button when 4 points of white square being produce there will be made up the region for the coverage setting area Press Enter button to confirm the setup and press ESC to back to surveillance mode F4 VGA function operation instruction In surveillance mode press the F4 button of remote control to swap with BNC VGA output follow with Video output gt VGA1 VGA2 VGA3 There are three types of VGA output to apply to d
4. Definition Function 1 Numeric Key 0 9 Keys Numeric for number key in or video swapping For non menu screen 1 2 3 and 4 represent for the video channel 1 2 3 and 4 respectively Keys Use for volume control or while checking can play as next pervious page even changing some parameters for configuration 2 Menu Operation A Wi Up Down directional keys lt gt Left Right directional keys ENTER Key Confirm OR Time display while in monitor mode 3 P T Z Control Key Key Definition Zoom In Zoom Out Zooming adjustment Brightness Brightness Brightness adjustment Focus Focus Image Sharpness adjustment Auto Auto Mode activate Manual Manual Adjustment Platform Default Use with Default configuration Window Wiper Lighting Control with window rain wiper and lighting 5 Other Key Definition POWER ON System turn on and off Standby and Start LOGIN LOCK Login to enter to operate mode with require password and lock KEY current setting activate CHECK Checking with record information store inside of hard drive QUAD Stop recording to swap between 1 4 screen PARAMETER Display the parameter for each channels ONLY APPLY FOR TEXT BASED UI NOT FOR THE GUI ANALOG Stop the recording and while in signal channel screen press this button to adjust the color brightness Contr
5. sections and it will playback the video data n While in playback press F1 button of the remote control the screen will show following selection Time 00 00 00 00 Start Return n This menu is for searching time and playing the data of a specified time From the starting time of the data saved To the closing time of the data saved n Press Exit button to close search mode u Alarm Record Select this item then the right screen will show the alarm record data Select one of these events and press Start to playback u Event Log Select this item and press Enter the screen will show as below Record Playback lt System Info Alarm Log Alarm Log Browser Spora res Date Time Cause 2004 08 26 07 00 19 Video Loss 2004 08 27 15 23 55 MD 2004 09 03 10 44 03 Video Loss 2004 09 10 22 39 29 Wrong PW PageDown Paget of 3 Alarm Log record the recently alarm information Operate Log record the recently operation setting information u System Info 20 MPEG4 Mobil DVR User Manual Operation Instruction Record Playback Event Log NEED Channel Info Channel Overview Status Hard Disk Info Machine Info PageDown Page of 2 J Channel I nfo it ll show all channels status in this manual Hard Disk I nfo it ll show all HD information in this manual Machine I nfo it ll show the machine s ID No Serial No and the software version No Operator Operation Instruction wh
6. D must the same as the setting of connection P T Z Il Playback Function Instruction After administrator login and press Check button of the remote control and the screen will show following menu selections Playback Event Log System Info 1 Playback Select this item and press Enter the screen will show as below 18 MPEG4 Mobil DVR User Manual Operation Instruction TER oe em All Record Playback Record at Select Date and Time Alarm Record Channel 02 Date Time 2004 10 20 14 20 Start Return All Record Select the date and time press Start the right screen will show as below Date 2005 01 31 i 2 Se PE 0 44 12 13 14 45 46 17 18 19 20 21 22 23 24 28 29 30 1 Streamin 00 00 00 30 M Di 30 Streamin 00 00 00 21 M Di 30 Streamin 00 34 00 38 M Di 30 N un n For example Date show the date you select Date highlight with Yellow color express there are recording data in these days Date with Blue color the cursor location to allow to select 1 the channel number Streamin the channel name 00 00 00 30 the record data start and end time M the record mode M manual record A Alarm record R Timing record HD1 the picture resolution HD1 CIF 30 the framerate 19 MPEG4 Mobil DVR User Manual Operation Instruction n For playback selected record data simply press Enter in select
7. MPEG4 Mobile DVR User Manual MPEG4 Embedded User Manual Installation Guideline b c d e f 9 h Installation Environment In order to ensure the safety with the DVR product and maximize product performance keep DVR product in normal condition please notice the following remark while before install the product a Please use DC12V ONLY DO NOT PLUG INTO HIGH VOLTAGE SUPPLY Away from humidly place or exposure with rain DVR should be install with horizontal position DVR should be avoid to locate in shocking place Avoid to expose DVR with direct sunshine and away from high temperature For the heat transfer and ventilation purpose require at least 15cm space distance between DVR and other object such as wall while install the device Correct grounding for the DVR device while operating Check with the connection with other equipment while DVR operating B Other notice a b c d e f 9 Do not operate the device with wet hands Away from any web place fire hazard occur by short circuit damage by any liquid drop to device Do not place anything on the top of device Use soft cleaner to clean the device no chemical cleaner use here Live voltage does exist while the device is being connected with power supply even device off Please disconnect the power supply while long time not using If the DVR does not operate correctly do not disassemble it without authorization Contact your local agen
8. ast Hue sensitivity level follow with color gt brightness contrast Hue MD Motion detection sensitivity using and make the adjustment EXIT Goes to the previous step in the menu PLAY Starts and pauses playback still image is displayed SLOW Plays slower than normal speed PAUSE STEP Stops the playback mode Frame playback CF While CF Card inserted this button can activate for the CF function FWD Fast forward X2 X4 speed available play for resume at normal play REV Fast backward X2 X4 speed available play for resume at normal play LANGUAGE Spared button no use NET Spared button no use RECORD Login with Administrator first press this button to activate 4 manual MPEG4 Mobil DVR User Manual Operation Instruction record or for single channel monitor system can activate 1 manual record STOP Login with Administrator first press this button to stop manual recording SETUP Setup with system configuration and parameters F1 Time select while in playback mode F2 P T Z control function F3 Press this button to setup the Mask area while in surveillance mode F4 While in monitor system swap with BNC VGA output MPEG4 Mobil DVR User Manual Operation Instruction System Start up Shut down 1 System Start up Connect with DC power with 12V After the system in standby mode press the ON OFF button in remote control the red
9. cy for after sales service The warranty will become invalid if it is disassembled without authorization Remark This device had been certified with the international safety standard HDD Size Required Must use 40G or higher for primary Hard Disk MPEG4 Embedded User Manual Product Functions Features l High speed embedded CPU and real time embedded control operation system are adapted with the product it provide operation stability no hang up error more reliability and easy for maintain Operation with front panel and remote control security with double password lock System management require for authority code in order to provide safety system Using with hardware MPEG 4 encode to provide better streaming quality it support Full D1 1 2D1 CIF resolution as well as adjustable frame rate and provide space efficiency with compact video size Storage used with FAT32 format suitable for 11DE hard drive connections Provide multi channels operation such as u 4 channels video input capture u 2 channel video monitor and reply u 1 channel VGA output u 2 channels audio input u 1 channels audio output l 4 channels alarm input with programmable setting With kinds of surveillance display screen 1 4 windows per screen Time setting to activate recording system with auto switching system re activate after power shut down Alert system for any video signal loss or disturb Available for manual time setting a
10. dministrator can enter into all functional feature level with the device Default password is 88888888 Please enter part No amp password Part No Password Enter Cancel Remark There will be difference with administrator and user level authorization User can only playback all exist file however can not stop with the recording neither to getting record setup or changing While administrator can use with all 10 MPEG4 Mobil DVR User Manual Operation Instruction those setup features While password key is correctly the count down timing shown in top right corner will change from red to green color this would indicate access with difference operation There will be 100 seconds operation time allow after every key in button being pressed before system locked User will be require to re enter password to back to operation level once the LOCK indicator shown in top right corner Must key in unit ID and password to enter into operation system while in LOCK status 3 System Logoff Press Login Logoff button in front panel or remote control after the record stop the system will go into standby mode Remark Please make sure the system status is in standby mode before power off Avoid any improper operation in here please do not power off the machine while recording playback system setting MPEG4 Mobil DVR User Manual Operation Instruction Operation Instruction I Administrator Operation Instruction
11. e you will enter into Mask area setup screen and you can see that there are white block as start point appear in screen 14 Operation Instruction Then you can move your cursor to select the cover section Press Enter to place the point Minimum 3 points need to place after complete the cover areas double press the Enter to form the cover areas u Mask setting can be into other irregular shape as shown 15 MPEG4 Mobil DVR User Manual Operation Instruction 7 One Step Schedule Period1 Period2 setup the Date Zone 1 and Zone 2 after confirm to setup Quick Setup and the DVR will auto record follow this setup 8 Time Schedule Record Select this into two options ON and OFF ON to record by schedule OFF not to record by schedule then press APPLY to confirm 9 Alarm Record Setup whether to record at the same time Event Schedule in Schedule menu will changed ii Schedule Enter into this item and the screen will show as below System Quick Setup a Event Setup PTZ J CH1 so ACTIVATE Sohedule Record Event Schedule Schedule Table Days Period 1 Period 2 Everyday 00 00 23 59 i abiti i Labini aes mejam seine mejne NADPATI AAA nin ti iu 1 Schedule Record This menu is to set the recording conditions by channel and time schedule When you set the Schedule Record in Quick Setup
12. e 2 channels audio input I Audio output 2 channels for stereo audio out Video input Channel 1 4 for video signal input Video output 2 channels for video signal output Alarm signal in out RS 485 4 channels input output VGA output with external computer monitor Internet interface Ventilation fan for main unit Power connection MPEG4 Embedded User Manual MPEG4 Alarm connector pin definition O 150000000000000001 3000000000000000016 440000000000000031 1 Pin definition Pin DEF Function Pin DEF Function h 1 AI 1 INO alee 16 5COM input Channel 2 Alarm 2 IN1 3 17 5NO unavailability input Channel 3 Alarm 3 IN2 18 5NC input Channel 4 Alarm 4 IN3 19 6COM input Power fault report 5 IN4 unavailability 20 6NO output 6 IN5 unavailability 21 6NC 7 IN6 unavailability 22 7COM 8 IN7 unavailability 23 7NO Fault report output 9 OUTO unavailability 24 INC 10 OUT1 unavailability 25 485A 485A 11 OUT2 unavailability 26 485B 485B 12 OUT3 unavailability 27 485GND Ground 13 4COM 28 38 GND Ground Channel 4 Alarm 14 4NO 39 44 12V 12V output 15 4NC MPEG4 Embedded User Manual Remote Control LOGI N LOCK PLAYBACK APERTURE FOCUS O EXI T AUTO RECALL PRESET SW TCH PLAY SLOW PAUSE SETP CF REV LANGUAGE Operation Instruction MPEG4 Mobil DVR User Manual Operation Instruction Remote Control Key
13. en the operator enters into the device there are only playback view available Section Il in this manual IV Compact Flash Card Upgrade and Operation Instruction Compact Flash Card Upgrade 1 2 3 4 Using the PC to make the Compact Flash card format into FAT32 format Then copy the upgrade firmware directly into CF Card root directly Insert the Compact Flash card into CF Slot before device power on Press ON OFF button without release while switch on the power the ON OFF button is inside of the unit as below if you need to upgrade the DVR you must open the cover of the unit 21 MPEG4 Mobil DVR User Manual Operation Instruction Vi 7 8 Compact Flash Card Backup In order to copy the data from hard disk into Compact Flash card please follow the procedures as 1 2 3 4 Within 2 3 seconds the LED light SYS and POWER flashing and that mean upgrading in progress While the LED light flashing release the ON OFF button Upgrading would take approx 1 minute and both LED will stop flashing once upgrading completed Turn off the device and then remove the Compact Flash card from the slot Restart the device and the new software should be operated Insert the Compact Flash card into CF Slot before device power on Power on the device and stop all recording activity Pressing CF card button in remote control or front panel this will allow to copying all require information and data into
14. ifferent VGA standard 23 MPEG4 Mobil DVR User Manual Operation Instruction vii Technical specification data Item ii Specification Details English system Icon operation interface OSD menu Interface User level password administrator password 4 channels independent input with 1 0Vp p 759 BNC 2 PAL NTSC output with 1 0Vp p 759 BNC composite video signal 1 VGA output 1 2 4 windows per screen Video Display PAL 25 frames per second CCIR625 lines 50 Hz Standard NTSC 30 frames per second CCIR525 lines 60 Hz Real time recording with 1 4 channel playback and surveillance Resource 1 4 channel online real time surveillance 2 channel input L R Channels 60092 RCA 2 channel output 60092 RCA 1 0 2 2V Audio lt 30dB Recording Synchronous with video Format Compression MPEG1 LAYER2 Encoding MPEG 4 H 264 Variable encode rate Fixed encode rate Image D1 704x576 pixels for PAL CIF 352x288 pixels for PAL Resolution D1 704x480 pixels for NTSC CIF 352x240 pixels for NTSC 15014496 Standard 15011172 Standard Video Freq 6 25K 350Kbyte s 6 25K 250Kbyte s Digital 24Kbyte s Brace ing Puao Ered os and Audio Size 28 8Mbyte hour Storing Rate Video Size 22 5M 1260Mbyte hour 22 5M 900Mbyte hour Rate 1IDE hard disk support 200G or larger 8 Adjustable levels Quality 25 frames sec channel Rate Bi directional Independent setting with each channel with 192 detect region for Detect each chan
15. ighest sensitivities The area set the MD is red out and press the Submit button After setting press the CLOSE button and you go to the previous menu 3 Timing Setup Setup the Post Record Time Post Alarm Time and Buzzer Alarm Time V PTZ Enter into this item and the screen will show as below 17 MPEG4 Mobil DVR User Manual Operation Instruction System Quick Setup Schedule Event Setup PTZ Setup ALL CH ALLCH 2 a Protocol Pelco D CH2 Baud Rate 9600 CH4 PTZ ID 00 64 05 CH4 za a All CH When move to this Item setup the Protocol Baud Rate PTZ ID and press Apply button It ll set all channels into the same PTZ Protocol select difference protocol at Fast Dome PIH016 017 Dscp Pelco P Pelco D Pelco06 15 u u u BaudRate select difference protocol at 1200 2400 4800 9600 PTZ ID select difference ID at 00 64 Select Test button and the screen will in a single play mode the House control also show at upper of the screen Using the remote control or front panel to control the platform For up direction WV For down direction 4 For Left direction le For Right direction Zoom Zoom For Zooming adjustment Brightness Brightness For brightness adjustment Auto Auto Mode activates CH1 1 4 when move to this item it can only setup the PTZ ID of the 1CH Remark The parameter of Protocol BaudRate PTZ I
16. k remote network It defines the size of one network number of Ps included The address assigned as the Subnet Mask address is limited u Setup Gateway is the IP address that is assigned to a router connection the Internet and local network It is a channel to connect a local network with an assigned network ID to the Internet In general the next number of the local network is assigned u Setup MAC Address set the default MAC address of your internet IP address Security Select this into two options YES and NO when NO being selected this will allow to enter into SETUP function directly When YES being selected there will be password required then user required key in login password to enter into system Only accept for User password or Administrator password u User Password The User authorities can only access monitoring and playback The default is 000000 When the user password is set to YES the screen is locked and users can only access monitoring and playback u Admin Password The Administrator authority can access all functions The default is 88888888 Default Setup select this item select this into two options Cancel and Apply when Cancel being selected this will allow canceling to recover default settings When Apply being selected this will sure to recover default settings Quick Setup Enter into this item a
17. lert playing this will make the unit more effectively and hard space efficiency Also for the motion detect function available with setting for 16X12 192 detect region area with adjustable sensitivity detect level Pre setting record function and extend alert function in order to ensure alert information 100 capture with user requirement Available for x2 and x4 fast forward backward function and slow motion rate at x1 2 x1 4 and x1 8 as well as pause and frame by frame function PAL NTSC system available Individual setting for each capture channel for brightness contrast color motion detect setting Complete daily report for alarm record and operation record good for monitor record and analysis l RJ 45 network inlet outlet available for the internet function for ADSL ISDN intranet etc setting with local IP and hosting address l Using IE browser for internet explorer RS 485 connection for the platform decoder available for difference frequency setting and decoder parameter as well as extendable function for the decode function VGA output provide better video quality and progressive scan option as well Support Compact Flash card storage and IBM Microdrive disk MPEG4 Embedded User Manual Upgradeable with latest firmware and backup file system provide reliable storage solution MPEG4 Embedded User Manual Back Panel JAV O 0 Output 24V Back panel and connection outlet I Audio input provid
18. light will be turn off then monitor will be activate to show as 4 channel windows status there will be channel number to indicate each input signal Also on the top of screen will show the system time number of hard disk and CF card status also show in center of the screen there would be alert warning for no hard disk install all of the information only shown on the screen for 5 6 seconds There will be count down from 100 to 0 second shown in red color font the system will be locked up after the count down to 0 second Notice Ifthe device being set for timer record function there are no need for standby status after the system turn on the system will go to multi channel screen 2 System Login While the system being lock in status require to press Login Logoff button in front panel or remote control then the screen will have pop up window Unit ID Unit ID 000 the sub menu will shown as bellow then user need to select desire unit ID there will be Password required then user required key in login password to enter into system Only accept for User password or Administrator password 1 While user password key is correctly there will be shown as message USER PASSWORD CORRECT then user can enter into restrict functional feature level with the device Default password is 00000000 2 While Administrator password key is correctly there will be shown as message ADMIN PASSWORD CORRECT then a
19. nd the screen will show as below 13 MPEG4 Mobil DVR User Manual Operation Instruction system GREET Schedule Event Setup PTZ Name Securtex Quality 1 high 8 low 1 RES CIF Rate fps 20 Time Insert OFF Mask Enable OFF One Step Schedule Period 1 Period 2 Everyday 00 00 23 59 mimi isztedzzhuzice ates tati ajae it Time Schedule Record OFF Alarm Record OFF 1 Name select this and press enter then the screen will show as below Using the remote control to move the cursor to Back space and press enter to delete the before name then move the cursor to select and press enter to key in the name Finish to key in and press Apply to confirm to setup the company name And press the Exit key to back previous manual On Internet directly use your PC keyboard to setup it 1 1 0 0 0 0 Boa wE ELok WSEH les JARENE be 2 Quality I mage Quality From 1 to 8 levels 1 is the best quality Using the cursor to select and press APPLY to confirm this function 3 Camera Num Setup how many camera 1 4 to record 4 Rate fps Setup the recording frame rate 5 Time Insert to setup whether to display the time in the screen Off no display Upper to display the time on the top of the screen Bottom to display the time at the bottom of the screen 6 Mask Enable ON allow to setup the mask area OFF not to setup the mask area u Once Mask enabl
20. nel and adjustable motion sensitivity a 4 independent input channels 4 independent alarm output 2 voltage output 2 open switch with output at 12VDC 500MA Open Short Com port RS485 extendable with external modem Serial Port RS232 common serial port Network port RJ 45 10M 100M broadband port Internet Support TCP IP UDP IP Protocol 24 MPEG4 Mobil DVR User Manual Transfer mode Dial up ADSL ISDN internet intranet Operation Instruction Brower Power IE browser DC 12V 20 Consumption 3A 15W without hard disk Working Temperature Working Humidity Others 0 50 C lt 80 Mechanical Dimension Clock 180 L x265 w x125 H 2 9KG Without hard disk Build in system clock and calendar 25
21. onfirm the video type is depend on your local country format and it can not be changed while record is being proceed 12 MPEG4 Mobil DVR User Manual Operation Instruction 4 Audio Record sets whether or not to record audio It can not be changed while record is being proceeding HDD O Wi select this into two options ON and OFF When ON being selected this will allow recording continuously even the hard disk space full up and the video will be recording into FIFO First In First Out format when OFF selected which disable the recording function while the hard disk space full up HDD Format This function only can be used in host machine this will allow to format the hard disk drive while non recording status while this option being selected selected with STAR and press Apply to confirm this function WARNING ONCE THE HARD DISK FORMAT BEING PROCEED ALL DATA WILL LOST FOR THIS HD AND THE FILES CANNOT BE RECOVERING PLEASE BE SURE BEFORE PROCEED Network highlight and select with Network to login setup then select the required area When using the Internet you connect to servers in other locations receive information and exchange emails using an IP address You can t get access to the Internet without an IP address u Setup IP address enter the Host ID which ranges from 0 to 255 Setup Mask subdivides the local network and makes each subnet into a different networ
Download Pdf Manuals
Related Search