LED 36 - Bargeheights
Contents
1. Keeping the lens area clean will ensure maximum light output Use glass cleaner on a soft cloth to wipe down the lens area and the outer enclosure of the LED 36 whenever it gets dirty or dusty Always make sure the vent holes are kept clear The fan won t work if there s no place for the air to go Any other repair or maintenance should be performed by quali fied individuals only There are no user serviceable parts in the LED 36 If you find your LED 36 behaving strangely please feel free to contact us and we ll help with troubleshooting Returns While your LED 36 was tested and working perfectly before it left to join your family sometimes things can happen If there s a problem and you need to return your LED 36 don t worry It s easy Head over to www bargeheights com support and select the LED 36 or send an email to support bargeheights com and we ll issue you an SR Service Request number Carefully pack your LED 36 for shipping using the original box and packing material if possible Use a prepaid trackable shipping method such as UPS FedEx or USPS Priority Mail Please include the following information with your fixture so we can best help you 1 Your contact information Name Address Phone Number Email address 2 The SR issued to you 3 A brief description of the problem symptoms We will take a look at the fixture and at our discretion repair or replace the fixture Please note that we cannot2. or other moisture like your bathtub e Do not operate the fixture with flammable items nearby NEVER lay anything on the fixture while it is on e Give it space The LED 36 needs at least 6in 15cm from other surfaces and objects Make sure that none of the ventilation or fan slots are blocked e ALWAYS disconnect the fixture from its power source before servicing or cleaning e ALWAYS secure your LED 36 using a safety cable NEVER hang or carry it by its cord It has a yoke for a reason e DO NOT operate when the ambient temperatures are higher than 104 F 40 C If it s too hot for you it s too hot for your LED 36 e If your LED 36 stops working properly stop using it immediately NEVER try to repair it yourself Attempting repairs in the field can result in damage or injury Please contact us for repairs or replacement e Make sure the power cord is not frayed or damaged e Never disconnect the power cord by pulling on the cord Use the plug e Avoid direct eye exposure to the light source while it is on It s cool looking and fun to watch but staring into the light can damage your eyes Caution There are no user serviceable parts inside this fixture Do not open the housing or attempt any repairs yourself Not only is it a bad idea it will void your warranty which is a bummer when you need a working light If you do need service please contact Bargeheights Damages sustained as a result of modifications to t
3. and head to www bargeheights com support for user manuals DMX channel lists and support information You can also email us at support bargeheights com We re happy to help WARNING To reduce the risk of fire or electrical shock do not attempt to use this fixture with any covers missing or removed The Bargeheights LED 36 carries a one year 365 day manu facturers limited warranty Please contact Bargeheights for warranty repair or returns All returns require an SR Service Request number If your fixture is still under warranty contact us and we ll walk you through the process 2011 Bargeheights Inc Page 3 Introduction e PAR style LED Wash Luminaire e Full RGB color mixing via 36 x 1w LEDs 12 Red 12 Green 12 Blue e High output low power consumption e Variable electronic strobe e Variable electronic dimmer e Master Slave modes e Built in standalone modes no controller required e RGB color mixing ability in standalone mode e Rugged aluminum chassis e Locking yoke e Quiet internal fan for cooling m DMX Quick Reference Overall Intensity Red Intensity Page 4 LED 36 User Manual rev B 2 SAFETYINFORMATION e DO NOT connect the fixture into a dimmer Use constant line voltage only to avoid damage e Make sure you are connecting the fixture to line voltage that is not higher than the voltage stated on the rear of the fixture e The LED 36 is for indoor use only Do not expose the fixture to rain
4. be responsi ble for damage that takes place during shipping so make sure you pack the fixture well Page 14 LED 36 User Manual rev B Shipping Damage Damage incurred in shipping is the responsibility of the shipper and must be reported to the shipping company immediately upon receipt of the items Claims must be made within seven 7 days of receipt Contact Us bargeheights inc www bargeheights com Support www bargeheights com support support bargeheights com 859 904 9444 2011 Bargeheights Inc Page 15
5. that allow you to navigate the control menus lt MENU gt Go up a level in the menu system hold to confirm lt gt Scroll to the next higher number or menu selection lt gt Scroll to the next lower number or menu selection lt ENTER gt Select the current number menu selection To access the main menu press the lt MENU gt button Use the lt gt or lt gt buttons to navigate through the menu options Press the lt ENTER gt button to select the option displayed and use the lt gt or lt gt buttons to change the settings Once your changes are made press lt ENTER gt to accept the change Page 8 LED 36 User Manual rev B Menu Structure 2011 Bargeheights Inc DMX Control Mode Auto Control Mode Slave Mode Auto Mode Color Control DMX Address Setting Auto Mode Speed Control Page 9 DMX Control Mode To change the DMX starting address e Press lt MENU gt until the DMX channel AGG AS IZ is dis played e Press lt gt or lt gt to select your starting address 1 5 Id e Press lt ENTER gt to assign your selection To put the fixture into DMX Control Mode e Press lt MENU gt until the control mode is displayed dalo or Huta or SCHE e Press lt gt or lt gt to select DMX Control Mode data e Press lt ENTER gt to assign your selection DMX Channel Assignments Channel Value Channel Value Function 0 No Strobe 1 255 Strobe slow gt fa
6. they are simple to build yourself DMX Terminator 3 pin XLR Male connector 120 Ohm resistor gt 3 Ya watt Page 6 LED 36 User Manual rev B 3 pin vs 5 pin Some manufacturers use 5 pin XLR connectors for DMX trans mission Don t worry The two are still compatible Adapters are available on the internet and from lighting retailers If you want to build your own here are the proper connections Cable Conductor 3 pin Female 5 pin Male output input Shield Ground not connected not connected not connected not connected Master Slave Mode The LED 36 also has a Master Slave mode In this mode you can set one fixture in the line to act as the master controller and up to 32 other fixtures can be connected and will mirror the operation of the first In this configuration you do not need a DMX controller Master Fixture DMX IN DMX OUT 8 Connect the fixtures just as you would for DMX control See the OPERATION sec tion of this manual for more information on how to set up Master Slave mode DMX IN DMX OUT to next O Ena Slave Fixture 2011 Bargeheights Inc Page 7 4 OPERATION CONFIGURATION We here at Bargeheights don t really care for DIP switches They are hard to see in the dark and since most of us don t quickly think in binary they are tricky to set properly The LED 36 has an LED display with a simple menu system There are four control buttons below the display
7. bargeheights User Manual RGB Wash Luminaire TABLEOFCONTENTS 1 The Beginning 3 Unpacking 3 Support 3 Introduction 4 DMX Quick Reference 4 2 Safety Information 5 3 Setup 6 DMX Cabling 6 DMX Termination 6 3 pin vs 5 pin 7 Master Slave Mode 7 4 Operation Configuration 8 Menu Structure 9 DMX Control Mode 10 Auto Control Mode 11 Master Slave Mode 12 Technical Specifications 13 Photometric Data 13 5 Care Maintenance 14 Returns 14 Shipping Damage 15 Contact Us 15 LED 36 User Manual rev B 1 THEBEGINNING Thanks Thank you for choosing the Bargeheights LED 36 This versatile PAR style LED wash luminaire will provide reliable performance day in and day out To ensure long lasting performance please follow the guidelines in this manual The instructions here are important for your safety and the maintenance of this fixture Enjoy Unpacking All of our luminaires are thoroughly tested prior to being shipped While your LED 36 functioned perfectly when it left us it may have been bumped around during shipping Please inspect the carton and if you notice any damage take a good look at the fixture If you see any damage it is important to contact our support team right away And if you find any pieces necessary for operation are missing let us know We ll make it right as soon as possible Support If something is not working properly let us know Grab a com puter or your favorite handheld device
8. d dalo or Huta or SLAE e Press lt gt or lt gt to select Slave Mode SLAE e Press lt ENTER gt to assign your selection Connect LED 36 fixtures and set them in Slave Mode and they will operate mirroring the first fixture Do not set the first fix ture in Slave Mode only the other fixtures Page 12 LED 36 User Manual rev B Technical Specifications 100 250v 50 60Hz Qin h x 9in w x 12in 1 230mm h x 230mm w x 310mm Model iens 36 x 1watt 12 Red 12 Green 12 Blue Dimensions Weight ans 5 0Ka Power gt 60 watts Consumption 6 channels 25 degrees beam 35 degrees field Setup amp Addressing LED Menu display no dip switches Photometric Data 3 0m 5 0m 7 0m Beam Diameter eee gt ea amete 4 4 7 3 10 3 Illuminance lux 3110 1470 Photometric data taken with all channels at full Due to varia tions in all LEDs these values should be considered approxi mate All LED sources experience a lowering of output and some color shift over time LED output varies with ambient operating temperatures 2011 Bargeheights Inc Page 13 5 CARE MAINTENANCE Your LED 36 is designed for long life with minimal upkeep Since there are no lamps to replace maintenance is simple just keep your LED 36 clean and dry Especially if you are in a dusty or haze filled environment there are some simple steps you can take to ensure a long happy life for your LED 36
9. he fixture or disregarding information in this manual will not be covered by your warranty If something is wrong let us take a look at it We ll help you out 2011 Bargeheights Inc Page 5 3 SETUP DMX Cabling The LED 36 has standard 3 pin XLR connectors for DMX con trol and daisy chaining Up to 32 devices can be daisy chained together on a single run Standard microphone cables will probably work OK but DMX is a serial data transmission with impedance specifications that are different than analog audio Cables specifically designed to transmit DMX signals will always work best As an example Belden 9841 meets the specifica tions for DMX 512 applications The longer the cable distance the more important proper cable selection is Shield Data Data DMX Termination Sometimes errors will crop up in your DMX line especially if it is a long run When this is the case or if you just want to make sure your DMX runs have the best chance at accurate transmis sion you can use a terminator A terminator is a 120 ohm 4 watt resistor which is connected between pins 2 and 3 of a male XLR connector DATA and DATA This connector is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a cable terminator will de crease the possibility of erratic behavior Terminators are avail able on the internet and from lighting retailers If you re handy with a soldering iron
10. st 0 24 White 25 45 Blue 46 66 Green 67 87 Red 88 108 Cyan 109 129 Magenta 130 150 Yellow 151 171 Color Strobe 172 192 Color Change 193 213 Color Slow Fade 214 234 Audio Strobe 235 255 Audio Color Change Page 10 LED 36 User Manual rev B Auto Control Mode The LED 36 has an automatic control mode that does not re quire a DMX control signal e Press lt MENU gt until the control mode is displayed dalo or Huta or SLAE e Press lt gt or lt gt to select Auto Control Mode Auto e Press lt ENTER gt to assign your selection Auto Control Mode has two selectable controls color and speed The color mode has 14 individual choices CLO I Red LLUc Orange CLUJ Yellow CLOY Green LLUS Cyan CLUB Blue CLOT Magenta LLU Purple LLUG White LL id Audio Color Change LL II Audio Strobe LL id Slow Color Fade LL IJ Color Chase LL IH Strobe In Color Chase and Strobe modes there are 16 speeds from fast to slow 5PU I is fast 5F IB is slow 2011 Bargeheights Inc Page 11 Master Slave Mode Up to 32 LED 36s may be connected via the 3 pin DMX connec tions and controlled simultaneously without a DMX controller by using Master Slave Mode In this mode you can set one fixture in the line to act as the master controller and up to 32 other fixtures can be connected and will mirror the operation of the Master e Press lt MENU gt until the control mode is displaye
Download Pdf Manuals
Related Search