USER`S MANUAL
Contents
1. be cleaned only with a polishing cloth or a soft dry cloth Never clean with furniture wax benzine insecticides or other volatile liquids since they may corrode the cabinet ATTACHMENTS Do not use attachments not recommended by the product manufacturer as they may cause hazards WATER AND MOISTURE Do not use this product near water or other moisture or in condensing humidity environments such as a closed room with hot water running ACCESSORIES Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer CART A product and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the product and cart combination to over turn See Figure A VENTILATION Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating These openings must not be blocked or covered Do not place the product on a bed sofa rug or other similar surface This product should not be placed inside a cabinet or case unless proper ventilation is provided POWER SOURCES This product should2. be operated only from the type of of power source indicated on the marking label If you are not sure of the type of power to your home consult an electrician or your local power company LOCATION The appliance should be installed in a stable location NON USE PERIODS The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time GROUNDING OR POLARIZATION If this product is equipped with a polarized alternating current line plug a plug having one blade wider than the other it will fit into the out let only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact an electrician to replace the obsolete outlet Do not defeat the safety purpose of the polarized plug If this product is equipped with a three wire grounding type plug a plug having a third grounding pin it will only fit into a grounding type power outlet Fig A This is a safely feature If you are unable to insert the plug into the outlet contact an electrician to replace the obsolete outlet Fig A POWER CORD PROTECTION Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them Pay particular attention to the routing of cords at plugs convenience receptacles and the points where they exit from the product OUTDOOR ANTENNA GROUNDING If an outside
3. MONO eICE MONO ICE PRO AUDIO SERIES aN aN wo I gt 4 dB dB HIGH 4a is a a A yy MIC VOL MASTER VOL HEADPHONE VOL CROSS FADER USER S MANUAL CE PLEASE READ BEFORE USING APPLIANCE IMPORTANT WARNING AND SAFETY INSTRUCTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment To prevent electromagnetic interference with electric appliaces such as radios and televisions use shielded cables and connectors for connections The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage levels within the product s enclosure which may be of sufficient magnitude to constitute a risk of electric shock READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to FOLLOW INSTRUCTIONS All operating and use instructions should be followed CLEANING The product should
4. RS jack for use with a pair of headphones for cueing When cueing Channel 1 will play into the left earpiece and Channel 2 will playback into the right earpiece Rear Panel 1 DC IN Plug the included AC adapter into this jack The adaptor uses a 12 V DC 500mA plug with positive polarity 2 MASTER OUTPUT RCA Use standard RCA cables to connect this output to a speaker or amplifier system The level of this output is controlled by the master level knob on the top panel 3 RECORD OUTPUT RCA Use standard RCA cables to connect this output to a speaker or amplifier system The level of this output is independent of the master level knob on the top panel 4 LINE INPUTS RCA Connect line level devices such as CD players samplers or audio interfaces to these inputs
5. antenna or cable system is connected to the product be sure the antenna or cable system is some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements or the grounding electrode See Figure B LIGHTNING For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product to lightening and power line surges POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal OVERLOADING Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or
6. ecks to determine that the product is in proper operating condition WALL OR CEILING MOUNTING The product should not be mounted to a wall or ceiling HEAT The product should he situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat Top Panel NMONOFICE PRO AUDIO SERIES 1 CHANNEL GAIN Adjusts the corresponding channel s D 4 V pre EQ gain level Ne I 4B gam 4B 2 CHANNEL HIGH Adjusts the high treble frequencies a of the audio on the corresponding J channel a mon 4 3 CHANNEL LOW Adjusts the low bass frequencies of 7 the audio on the corresponding channel S I dB Low 4B 4 MIC VOL Adjusts the audio level of the microphone 0 I signal 5 5 CROSS FADER Mixes the audio playing in each of the two channels When the slider is 6 Ml to the left you hear only Channel 1 UI and when it is to the right you hear sd only Channel 2 When the slider is in the Middle you will hear both channels at the same time MASTER VOL HEADPHONE VOL 6 HEADPHONE VOL Adjusts the level of the headphone audio 7 MASTER VOL This control adjusts the output volume of the program mix 8 POWER LED Indicates the unit is powered on Front Panel 9 MIC INPUT This is a 1 4 TS jack for use with a dynamic microphone The microphone controls are located on the top panel 10 HEADPHONES This is a 1 4 T
7. electric shock Never spill liquid of any kind on the product SERVICING Do NOT attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel DAMAGE REQUIRING SERVICE Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions When the power supply cord or plug is damaged If liquid has been spilled or objects have fallen into the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often reguire extensive work by a gualified technician to restore the product to its normal operation If the product has been dropped or damaged in any way When the product exhibits a distinct change in performance this indicates a need for service REPLACEMENT PARTS When replacement parts are reguired be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part Unauthorized substitutions could result in fire electric shock or other hazards SAFETY CHECK Upon completion of any service or repairs to this product ask the service technician to perform safety ch
Download Pdf Manuals
Related Search