Copyright - Edge-Core
Contents
1. 4 After Microsoft Windows rebooted the PCI Adapter will be found and the system will assign the default network driver to the adapter 5 Select Control Panel from Start menu bar 6 Select System Device manager Network Adapters 7 Double click this adapter select update driver button Click Browse and select computer gt your CD Rom drive WVISTA32 64 Click OK to start installation 6 Wait until the installation finished and close this window Microsoft Windows 7 1 Turn off the computer 2 Insert the adapter into an available PCI slot 3 Power on the computer 4 Windows 7 supports inbox driver for the adapter and the system will install the driver automatically 5 If you want to update the driver please continue the following steps 6 Right click Computer Manager Device Manager Network Adapters 7 Double click this adapter select Update driver software button 8 Select Browse my computer for driver software 9 Key in E Win7 path and then click Next to update the driver for the adapter 10 Wait until the installation finished and close this window Novell Netware System Please execute the following commands For Netware Client LSL RTSODI IPXODI NETX or VLM F LOGIN lt USERNAME gt For Netware Server LOAD RTSSRV BIND IPX TO RTSSRV The help file in the CD will describe the detail driver installation information for all popular operating systems N2. INTERNET E mail address www smc com Support By email Driver updates www smc com Support Downloads World Wide Web http www smc com SMC1255TX 2 20 Mason Irvine CA 92618 Phn 949 679 8000 www smc com
3. SMC Networks EZ Card 10 100 Fast Ethernet PCI Network Adapter SMC1255TX 2 Copyright Information furnished by SMC Networks Inc 5 is believed to be accurate and reliable However no responsibility is assumed by SMC for its use nor for any infringements of patents or other rights of third parties which may result from its use No license is granted by implication or otherwise under any patent or patent rights of SMC SMC reserves the right to change specifications at any time without notice Copyright O 2010 by SMC Networks Inc 20 Mason Irvine CA 92618 rights reserved Printed in China Trademarks SMC is a registered trademark and EZ Card 10 100 is a trademark of SMC Networks Inc Other product and company names are trademarks or registered trademarks of their respective holders Warranty and Product Registration To register SMC products and to review the detailed warranty statement please check www smc com for the warranty terms in your country region SMC Networks Inc 20 Mason Irvine CA 92618 Compliances FCC Statement This device compiles with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation Warning This equipment has been tested and found to comply with the limits for a
4. 6 Close the computer cover and fix it with the screws that were previously removed to the case 7 Connect the network cable CAT3 or CAT5 UTP to the RJ 45 network connector of the new installed adapter card and the other end to router switch or any other networking device 8 Turnon the computer If the BIOS section of your computer s boot program is Plug and Play compliant then at power up the BIOS will configure any newly installed adapter automatically Note Due to some Plug and Play BIOS problems it happens occasionally that a newly installed adapter is assigned an Interrupt Number which is already used by another device In such a case the conflict of Interrupt Number will cause faults in the behavior of both devices Then it is necessary to run the CMOS Setup utility and manually assign a non conflict Interrupt Number 2 3 Fast Ethernet Connection 100Mbps Category 5 UTP cable is required for Fast Ethernet 100Mbps operation The maximum cable run between the adapter and the supporting hub switch or router is 300ft 100m Make the network connection by plugging one end of the cable into the RJ 45 receptacle of the adapter and the other end into one port in the hub switch or router 2 4 Ethernet Connection 10Mbps Category 3 Category 4 and Category 5 UTP cable as well as EIA TIA 568 100 ohm STP cable is required for Ethernet 10Mbps operation The maximum cable length run between this adapter and th
5. Connection folder then click Local Area Connection and Properties 7 Click Configure item and select Driver 6 From the Driver item then choose Update Driver 9 The system will prompt for driver search either by auto search or Display a list of known drivers Please select second one Display 10 The system will prompt for driver installation and please select Have Disk button 11 Key in ENw98 2000 path to install driver for the adapter Microsoft Windows XP 1 Turn off the computer 2 Insert the adapter into an available PCI slot 3 Restart the computer 4 After Microsoft Windows rebooted the PCI Adapter will be found and the system will assign the default network driver to the adapter 5 Select Control Panel from Start menu bar 6 Select Network Connection folder then click Local Area Connection and Properties 7 Click Configure item and select Driver 8 From the Driver item then choose Update Driver 9 Choose Install from a list or specific location Advanced and click Next 10 Select Don t search I will choose the driver to install then click Next 11 The system will prompt for driver installation and please select Have Disk button 12 Key in E WinXP path to install driver for the adapter Microsoft Windows Vista 1 Turn off the computer 2 Insert the adapter into an available PCI slot 3 Restart the computer
6. cable 2 Installation This section describes how to install the adapter For connecting to the network you must have the following 1 Network adapter card installed to your computer 2 Cabling compatible with network topology 3 CD ROM for the adapter card containing the drivers 2 1 Unpack and Inspect Caution Under ordinary circumstances this adapter card will not be affected by static charge as may be received through your body during handling of the unit In special circumstances where you may carry an extraordinarily high static charge it s recommended to reduce the charge by touching a ground before handling the adapter card Open the shipping gift box and carefully remove all items In addition to this User s Manual please check the following items e 10 100 Fast Ethernet PCI Adapter Card One Driver Manual CD One Low Profile Bracket Note If any of the listed items are missing please contact your distributor or reseller 2 2 Install the Adapter 1 Turn off the computer 2 Open the computer s cover in accordance with its manual remove any screws that fasten the cover to the case Find a free PCI slot and remove the slot cover from the case keep the screw 4 Insert the PCI card directly into the PCI slot by pushing it down carefully until it slides into the PCI connector 5 Fasten the PCI card to the computer case with the screw from the slot cover step 3
7. Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CE Mark Warning Countries of Operation amp Conditions of Use in the European Community SMC contact for these products in Europe is SMC Networks Spain S L Edificio Conata II Group CTSG Fructuos Gelabert 6 8 202a 08970 Sant Joan Despi Barcolona Spain This device complies with the essential requirements of the R amp TTE Directive 1999 5 EC The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R amp TTE Directive 1999 5 EC EN 55022 2006 A 1 2007 Class B EN 55024 1998 1 2001 2 2003 61000 4 2 2001 61000 4 3 2006 61000 4 4 2004 61000 4 5 2005 61000 4 6 2006 61000 4 8 2001 61000 4 11 2004 EN60950 1 2006 A11 2009 1 Introduction Thanks for choosing the SMC 10 100 Fast Ethernet PCI Card the SMC1255TX 2 This docu
8. e supporting hub switch or router is 300 ft 100m Make the network connection by plugging one end of the cable into the RJ 45 receptacle of this adapter and the other end into the hub switch or router 2 5 Drivers and Utilities CD The Divers Manual CD contains drivers for all popular operating systems Novell NetWare client server Windows NT3 5 NT4 0 2000 Windows 95 98 ME XP Vista Win7 Microsoft Client NDIS 2 0 DOS OS2 e Windows For Workgroup 3 11 e MacOS 10 1 Linux Kernel 2 4 or later 2 6 Test Program Note The test program can not be used in Windows 95 98 DOS mode Do not load any device drivers memory manager and anti virus software The test program can only work in clean DOS prompt This test program verifies the configuration of the adapter and helps to isolate any faults in the operation The test procedures are optional and will only be useful in the unlikely event that there is a problem such as an interrupt number conflict among your computer s add on cards If your adapter provides normal operation you don t need to follow the test procedures At your DOS prompt type the following command considering your CD ROM drive is E E rset8139 exe Enter A menu will open as follows below View Current Configuration Set Up New Configuration Run Diagnostics Exit RSET8139 Choose Set Up New Configuration to set up the Network Speed 10Mbps or 100Mbps and Transmiss
9. ect Target Machine then the system will setup a wake up event and wait for a magic packet to do the system wake up Step3 Master Machine Select Magic Packet to send a magic packet and wake up the target machine The MAC address of the target machine is required such as 00 eO 7d cO 00 02 Step4 Target Machine ACPI Testing events will be displayed Device State 1 PASS Device State 2 PASS Device State 3 PASS Step5 Target Machine Power down the target machine Step6 Master Machine Send a magic packet to wake up the target machine Test The Wake up Frame Step1 Target Machine Select lt Target Machine gt then the system will setup a wake up event and wait a magic packet to do the system wake up Step2 Master Machine Select lt WakeUp Frame gt to send a wake up frame Step3 Target Machine ACPI Testing events will be show Device State 1 PASS Device State 2 PASS Device State 3 PASS Quick Installation Guide Please take the following steps for driver installation Please note that the drive E V represents your CD ROM drive Microsoft Windows 95 Windows 98 Windows ME 1 Turn off the computer 2 Insert the adapter into an available PCI slot 3 Restart the computer 4 After Microsoft Windows rebooted the PCI Adapter will be found 5 The system will prompt for driver installation Insert the Driver and Utilities CD into CD ROM drive and press Ente
10. etworks U S A Office 20 Irv Mason ine CA 92618 Phn 949 679 8000 Eu ropean Office C Fructu s Gelabert 6 8 2 24 Ed 08 ificio Conata II 970 Sant Joan Desp Barcelona SPAIN Ph n 34 93 477 4920 TECHNICAL SUPPORT From U S A and Canada 24 hours a day 7 days a week Phn 800 SMC 4 YOU 949 679 8000 Fax 949 679 1481 English Technical Support information available at www smc com English For Asia Pacific Technical Support information available at WWW smc asia com Deutsch Technischer Support und weitere Information unter www smc com Espa ol En www smc com Ud podr encontrar la informaci n relativa a servicios de soporte t cnico Francais Informations Support Technique sur www smc com Portugu s Informac es sobre Suporte T cnico em www smc com Italiano Le informazioni di supporto tecnico sono disponibili su www smc com Svenska Information om Teknisk Support finns tillg ngligt p www smc com Nederlands Technische ondersteuningsinformatie beschikbaar op www smc com Polski Informacje o wsparciu technicznym sa dostepne na www smc com CeStina Technicka podpora je dostupna na www smc com Magyar M szaki tamogat informacio elerhet on www smc com RT www smc prc com 8 rh Yr Edit xc dE www smenetworks com tw ensnwexamamumetialafi www smc asia com XDE www smc asia com amp 2 21 BEgt Ul Ct
11. ion Mode Full or Half Duplex and so on Choose Run Diagnostics to run the adapter test program Adapter test program includes Run EEPROM Test Run Diagnostics on Board Run Diagnostics on Network and Run Power Management Test After choosing the Run Diagnostics on Board you will see the following screen Interrupt 11 Full Duplex Disabled Pass Count Fail Count A T O Register B 100Mbps Loopback C 10Mbps Loopback D Cable Connection Cable Connection test shows you that the connection link might fail because either the cable is not connected or the cable link fails For the Run Diagnostics on Network test it is necessary to connect your computer with a supporting hub switch router or another computer This is a Ping Pong test This test cannot be completed unless there are minimum two computers on the LAN for sending or receiving the test packets For the Run Diagnostics On Network test Ethernet Address Ethernet Address 00E07DC00002 00E07DC00001 Target Machine Master Machine Network Master Machine Master machine sends magic packet or Wake up frame through the network Target Machine Target machine is notified whenever a qualified wakeup packet is received To Wake Up The Target Machine With A Magic Packet Step1 Target Machine Check BIOS POWER MANGEMENT SETUP ACPI Wake On LAN function must be enabled Step2 Target Machine Sel
12. ment describes the Installation of SMC1255TX 2 This adapter supports 10 5 100 5 Fast Ethernet and complies with the electrical and protocol requirements of the PCI Local Bus Specification revision 2 2 The Wake On LAN feature is supported by the adapter 1 1 Features The 10 100 Fast Ethernet PCI adapter is a cost effective high performance network interface card It operates in 10 5 and 100BASE TX modes and integrates easily with any Fast Ethernet hub switch or router EEE 802 3 LOBASE T and IEEE 802 30 100BASE TX standards 32 bit bus master for high throughput and low CPU utilization Wake On LAN e Full duplex operation at both 10Mbps and 100Mbps 10 100Mbps auto sensing Diagnostic LED for troubleshooting Single shield RJ 45 connector for using at either Speed Category 3 4 or 5 UTP cable for 10Mbps Operation and Category 5 UTP cable for 100Mbps Operation Plug and Play installation e Test program including Wake On LAN events Network drivers on the CD for Windows 95 98 ME NT 2000 XP Vista NetWare 5 Unix and Packet driver FCC CE certification 1 2 System Requirements To use the adapter you need the following components e A PCI master mode expansion slot that is compliant with PCI bus specifications revisions 2 2 e Driver Manual CD e following cables To operate at 1OMbps a Category 3 4 5 UTP Cable To operate at 100Mbps a Category 5 UTP
13. r 7 For Windows 95 Key in E path to install driver for the adapter 8 For Windows 98 Key in Ew98 2000 path to install driver for the adapter 9 For Windows ME Key in E winme path to install driver for the adapter 10 The Windows system will install the driver automatically 11 Reboot the Windows system Windows NT Turn off the computer Insert the adapter into an available PCI slot Restart the computer Click Start menu bar and select Setting item then Control Panel Select the Network icon If this is the first time to install a network on the machine then the system will ask YES or NO to install the network adapter Please select YES 7 If the computer already installed a network before then you need to select Interface gt Add 6 The system will prompt for driver installation 9 Insert the Driver CD into CD ROM drive and press lt Enter gt 10 Key in E winnt path to install driver for the adapter 11 The Windows system will install the driver automatically 12 Reboot the Windows system OQ LS Microsoft Windows 2000 1 Turn off the computer 2 Insert the adapter into an available PCI slot 3 Restart the computer 4 After Microsoft Windows rebooted the PCI Adapter will be found and the system will assign the default network driver to the adapter 5 Select Control Panel from Start menu bar 6 Select Network and Dial Up
Download Pdf Manuals
Related Search