BIPRO-420VF9 500 TVL, 42 IR Day & Night Effio
Contents
1. SHARPNESS HUE 1 MIRROR Mirror image the whole picture The default setting is OFF 2 BRIGHTNESS Adjust the entire brightness of the whole picture The setting value range is 0 255 3 CONTRAST The setting value range is 0 255 4 SHARPNESS The setting value range is 0 255 5 HUE The setting value range is 0 255 6 GAIN The setting value range is 0 255 6 ATR ATR OFF ATR is similar to WDR function While bright and dark parts are displayed on the screen simultaneously this function can help the user see the various parts of the screen more clearly And it can be adjusted according to different circumstances ATR LUMINANCE CONTRAST 1 LUMINANCE 3 options HIGH MID and LOW 2 CONTRAST 5 options HIGH MIDHIGH MID MIDLOW LOW 7 MOTION DETECTION MOTION DET ON lt When a moving object appears in the set detection area the camera will alarm We can enter the setting menu if the function is on MOTION DET DETECT SENSE 111 BLOCK DISP OFF MONITOR AREA ON AREA SEL 1 4 TOP 000 BOTTOM 000 LEFT 000 RIGHT 000 1 DETECT SENSE Used to set the camera s detect sensitivity The setting value range is 0 127 2 BLOCK DISP A block display switch If the function on the moving object would be traced by a flashing square grid 3 MONITOR AREA A monitoring area switch If the function on the square grid will appear in the monitor area 4 AREA SEL There are 4 monitor areas th2. Use the following 4 arrow buttons to navigate the menu 7 Selection will have a gray background Use the ENTER button to confirm selection Note Options with means it has a submenu The OSD main menu has two pages The user can switch between the two pages by NEXT or BACK Select the SAVE ALL to save any changed settings and then press ENTER Otherwise it will revert back to the original when the camera reboots The first page of the main menu is shown below SETUP MENU LENS MANUAL SHUTTER AGC AUTO lt WHITE BAL ATW lt BACKLIGHT OFF PICT ADJUST ATR OFF MOTION DET ON lt NEXT EXIT lt ALL The second page of the main menu is shown below SETUP MENU PRIVACY OFF DAY NIGHT AUTO lt NR CAMERA ID OFF SYNC INT LANGUAGE ENGLISH CAMERA RESET BACK lt EXIT 1 LENS LENS has 2 options MANUAL and AUTO This camera cannot install the auto iris lens temporarily 1 MANUAL The default setting is manual If the installed lens is manual type please select this option 2 AUTO If the installed lens is manual one please select this option The user can select the option by RIGHT or LEFT LENS AUTO lt The auto lens has the following parameters for the user to set Enter the setting page by using the ENTER button TYPE The drive mode of auto lens or the lens type It has 2 options
3. It is a Burst switch DELAY CNT Its used to set mode conversion delay time The setting value range is 0 255 DAY NIGHT It s used for set DAYNIGHT switching sensitivity The setting value range is 0 255 NIGHT lt DAY It s used for set NIGHT lt DAY switching sensitivity The setting value range is 0 255 COLOR Used to switch the mode to Color manually B W Used to switch the mode to B W manually If the user meets Burst interference the user can turn off the BURST B W BURST ON 10 NR The settings of NR MODE has 4 options Y C Y C and OFF The settings can be adjusted by Level Y and C NR NR NR MODE Y C 11 CAMERAID CAMERA ID OFF The user can set the CAMERA ID by Menu CAMERA ID CAMERA ABCDEFGHIJKLMNOPQRSTUV WXYZ0123456789 amp Che a Bes 7 OV CHRI CHR2 lt 1 CLR POS The Menu has 7 sections 1 2 CAMERA There are 2 lines for inputting ID characters CHARACTER It indicates every character s position There are 2 group characters CHR1 and CHR2 CHR1 consists of 26 English letters 10 digitals and 28 specific symbols CHR1 CHR1 consists of 26 English letters 10 digitals and 28 specific symbols CHR2 CHR2 has no character temporarily lt 1 When input ID please use gt 7 to move the cursor Choose one of them and then press ENTER CLR Used to Clear ID characters Move the cursor to the ID character
4. CCTV Camera Pros gt Video Surveillance Systems for Home Business amp Government Operational Manual BIPRO 420VF9 500 TVL 42 IR Day amp Night Effio E Weatherproof Bullet Color Camera FEATURES 1 3 Sony Ex View HAD II CCD Sony Effio E DSP 500 TV Lines 42 IR LEDs IR Distance up to 95ft 30m 2 8 12 0mm Varifocal Lens On Screen Display OSD Weatherproof IP65 Rating 3 AXIS Cable Management Bracket 420mA IR on 120mA IR off Power 12V DC This IR camera uses a high sensitive 1 3 Interline transfer Charge Coupled Device CCD image sensor and an all state circuitry which provides extremely long life and high reliability This camera offers excellent image quality and is not subject to distortions from magnetic fields This camera is an excellent choice for your CCTV system It captures high speed moving objects the sensor changes the day night mode automatically to show qualified color picture during daytime and clear picture at night time FE CE sf Copyright 2011 All Rights Reserved 1 339 I 340 I 341 R201111 V04 A Please read the Manual before attempting to use this product CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT OPEN COVERS OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL D Disposal of Old Electrical amp Electronic Equipment Applicable in the European Union and other Eur
5. DC and VIDEO DC means direct current control of iris lenses while VIDEO means video control of iris lenses MODE 3 options for adjusting iris AUTO OPEN and CLOSE AUTO means it can automatically adjust the size of the iris according to the light OPEN means open the iris all the time while CLOSE means close the iris SPEED The sensitivity of the adjustment of the iris when choosing AUTO The setting value range is 0 255 2 SHUTTER AGC SHUTTER AGC AUTO lt It has 2 options AUTO and MANUAL 1 AUTO AUTO is the default setting AUTO SETUP HIGH LUMINANCE MODE SHUT BRIGHTNESS 24 LOW LUMINANCE MODE AGC SHUT The setting value range of brightness is 0 255 AGC AGC OFF The setting value range of AGC brightness is X0 25 X0 50 X0 75 and X1 00 2 MANUAL MANUAL SETUP MODE SHUT AGC SHUTTER 1 50 AGC 6 00 SHUTTER The setting value range of SHUTTER is 1 50 1 120 1 250 1 500 1 1000 1 2000 1 4000 1 10000 AGC The setting value range of AGC is 6 00 12 00 18 00 24 00 30 00 36 00 42 00 44 8 3 WHITE BALANCE WHITE BAL ATW lt There are 7 types of white balance mode 1 ATW ATW means automatic tracking white balance In the range of 1800K 10500K it can continuously survey the color temperature to automatically adjust the white balance This mode is prior The setting menu is show as below ATW SPEED DELAY CNT ATW FRAME ENVIRONMENT SPEED T
6. at can be set The size can be adjusted by 4 buttons up down left and right The default setting is 0 If the user does not adjust the area size the square grid will not appear 11 8 PRIVACY AREA SHIELD PRIVACY OFF The user can set privacy area on the image randomly If the function on the user can enter the setting menu The setting page is show as below PRIVACY AREA SEL TOP BOTTOM LEFT RIGHT COLOR TRANSP AREA SEL There are 8 zones that can be set Their size can be adjusted by 4 buttons up down left and right The default setting is 0 If the user does not adjust the area size the square grid will not appear COLOR For every zones color setting the user has 8 options red green blue light green light blue light red white and black TRANSP The function is used for setting privacy area s transparency There are 4 options 0 00 gt 0 05 0 75 and 1 00 MOSAIC Set the privacy area to mosaic Notice the privacy area will be dim if the transparency is too high It will be clear if the setting value is adjusted to 0 00 9 DAY NIGHT MODE DAY NIGHT AUTO lt The Day night Mode has 3 options Auto Color and BW 1 AUTO If the setting is set to Auto the camera will switch the mode automatically In the daytime the camera is in color to get perfect color whereas the camera is in B W at night DAY NIGHT BURST DELAY CNT DAY NIGHT NIGHT lt DAY BURST
7. emoved we will not be able to confirm any information regarding when and where the product was purchased We have no other way to verify the purchase record without the serial number on the camera sticker therefore it should not be removed 2 Camera is modified in any way If the camera is scratched damaged or modified in a manner not described in this manual the warranty will be voided immediately It is the customer s responsibility to keep the camera in good condition 3 Video or power cable is cut The video cable and the power cable should not be tampered with Cutting or modifying of the cables will result in termination of the warranty Copyright 2011 All Rights Reserved 1 339 I 340 I 341 R201111 V04 PACKAGE CONTENTS 666666 One 1 IR Bullet Camera with power video cable and sunshield One 1 Allen Wrench Three 3 Screws Three 3 Wall Anchors One 1 Mounting Guide Sticker One 1 Operational Manual For any returns please include all components listed above with original packaging in Re sellable Condition Absolutely No Returns will be accepted if any component is missing and or damaged Unit mm PARTS amp FUNCTIONS DO on WN Sunshield Cover Zoom Adjustor Knob Focus Adjustor Knob Video Power Cable 3 AXIS Bracket OSD Multi function button Copyright 2011 All Rights Reserved 1 339 I 340 I 341 R201111 V04 OSD OPERATIONS Attention 1 2
8. he setting value range of SPEED is 0 255 DELAY CNT The setting value range of Delay CNT is 0 255 ATW FRAME The setting value range of ATW FRAME is X1 00 gt X1 50 gt X2 00 ENVERONMENT 2 options INDOOR and OURDOOR PUSH An auto white balance control mode If the color temperature in the range of 2300K 10000K it can exactly adjust the white balance USER1 User defined white balance mode 1 It can achieve the best effect by adjusting BLUE or RED The setting page is shown below UESEI WB B GAIN R GAIN 4 USER2 User defined white balance mode 2 The settings are like above 5 ANTI CR Used in the environment where there is a serious chromatic difference 6 MANUAL Adjust the white balance mode manually In specific lighting environment it can achieve the best white balance results The setting value range of Level is 0 255 MANUAL WB LEVEL 034 7 PUSHLOCK An auto white balance lock mode 4 BACKLIGHT COMPENSATION BLC BACKLIGHT OFF Backlight compensation include the following 3 options 1 OFF Close the backlight compensation function The default setting is OFF 2 Open the backlight compensation function 3 Shelter from the over brightness light such as car license plate recognition light HLC likes ECLP function 5 PICTURE ADJUST PICT ADJUST Choose Enter lt button then enter into the picture adjusting menu PICT ADJUST MIRROR BRIGHTNESS CONTRAST
9. highlighting compensation WDR Day amp Night Function Auto Manual Color B amp W Gamma 0 45 Electronic Shutter 1 60 1 100 000s NTSC 1 50 1 100 000s PAL Auto Fixed Video Output Composite Video 1 0Vp p 75 Ohms Lens 2 8mm 12 0mm Varifocal Lens IR LED 42 IR LED IR Wavelength 850nm IR Distance Max illumination is up to 95ft 30m Control Mode OSD Menu Supports 8 languages Motion Detection Box tracking and 4 zones set the position and size randomly Privacy 8 zones set the position and size randomly 8 colors IP Rating Weatherproof rating of IP65 Power Supply 12V DC RS 420mA max IR Off Power 120mA max Operating Temperature 4 F 122 F 20 C 50 C Dimension 6 46 L x 4 28 H x 3 66 inches 164 L x 108 8 H x 90 mm Weight 2 2 Ibs 1kg Specifications are subject to change without notice 19 I 339 I 340 I 341 ight 2011 All Rights R Copyright 20 ights Reserved R201111 V04
10. loth lens tissue or cotton tipped applicator and ethanol to carefully remove any fingerprint or dust 5 Check the power source voltage The power source voltage should be within the specified range Camera must meet the specifications Camera must be connected to a surge protector at all times 6 Objects and liquid entry Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock Never spill any kind of liquid on the video product 7 Servicing Do not attempt to service this video product by yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all service to qualified servicing personnel 8 Damage requiring service Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product c If the video product has been exposed to rain or water d If the video product has been dropped or the cabinet has been damaged e When the video product exhibits a distinct change in performance LIMITED WARRANTY This product is covered under warranty for one 1 year from the date of purchase The warranty will automatically be voided if any of the following occurs 1 Camera sticker is removed If the camera sticker is r
11. needs to be cleared Then choose CLR and press ENTER This way the user can clear ID character one after another POS Used to preview ID 12 SYNCHRONIZATION MODE SYNC INT 13 LANGUAGE LANGUAGE ENGLISH There are 8 languages Chinese English Japanese German French Russian Portuguese and Spanish 14 CAMERA RESET CAMERA RESET Used to restore to factory defaults If parameter settings are disordered please choose CAMERA RESET and then press ENTER CONNECTION DC12V POWER CABLE Monitor VIDEO CABLE TROUBLESHOOTING Item Problems Remedies 1 No picture or unstable Check video connection and power line 2 The image is blurred First check the lens for dirt or dust then use customized lens paper or cotton with little alcohol to clean Second check the focus length and OSD settings 3 The image is dim Adjust the CNT of monitor and iris 4 No motion detection frame and Check the option is ON or OFF privacy shaded frame Or check the menu parameters 5 Screen color cast Adjust WEB mode or direction in the special environment 6 The screen glittering The camera might be facing the sun 7 Functions are unresponsive Restore default settings 8 Camera is not working correctly Cut off the power supply and surface overly hot Then contact manufacturer 16 1 339 1 340 I 341 Copyright 2011 All Rights Reserved oo INSTALLATION NOTES 1 Avoid pointing the le
12. ns directly towards the sun or intense sources of light even when the camera is off The subject must not be backlit Do not install the camera in a place where temperature is below 20 C 4 F or above 50 C 122 F Avoid the following location for camera installation Near an object that releases a strong magnetic or electric field Areas with strong vibrations Step 1 Adhere the 84mm position sticker on the wall Step 2 Drilla 5mm hole on the position selected insert the plastic plug into hole Step 3 Put the power cable communication cable and video cable through bracket hole and leave sufficient length of connect cable Step 4 Fix the bracket on the wall with 3pcs PA4x25mm screws D 5mmx5mm es 27X6mm Sm PA4X25mm vat LN J Copyright 2011 All Rights Reserved 17 1 339 1 340 1 341 R201111 V04 Multi function button Focus Button Zoom Button 18 I 339 I 340 I 341 ight 2011 All Rights R Copyright 20 ights Reserved R201111 V04 SPECIFICATIONS Model NTSC BIPRO 420VF9 Image Sensor 1 3 Sony Ex View CCD II DSP Sony Effio E Total Pixel 270k Synchronizing System Internal Resolution 500 TV Lines Minimum Illumination 0 Lux IR on F1 2 S N Ratio gt 52B Auto Gain Control Auto Manual 8 setting values White Balance ATW PUSH USER1 USER2 ANTI CR MANUAL PUSH LOCK Back Light Compensation f eee Backlight compensation
13. opean countries with separate collection EE systems This symbol on the product or on its packaging indicates that this product shall not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product The recycling of materials will help to conserve natural resources For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product CAUTION 1 Never point the camera toward the sun Do not expose the lens directly to the sun or to strong light as this may damage the pick up device 2 Handle this camera with care Avoid any shock or bumping of the camera Improper handling could damage the camera 3 Requires a proper operating environment This camera is designed for indoor use The allowable temperature range for operation of this camera is between 4 F 122 F 20 C 50 C Copyright 2011 All Rights Reserved 1 339 I 340 I 341 R201111 V04 4 Clean the front face or lens It is recommended that the surface be cleaned every 3 6 months Cleaning should be done by using a chamois a very fine soft c
Download Pdf Manuals
Related Search