User`s Manual - oceanrevive led
Contents
1. User s Manual Timer Control LED Lighting System Before using the system Before using this system please read the Safety and Operation suggestions listed below Keep this manual handy for future reference 1 Remove any packaging material protecting the fixture 2 Never look directly at the LED bulbs when the system is on The strong lighting from LED bulbs could cause eye damage Safety 1 Power Source DO NOT overlook the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than another A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the plug does not fit into your outlet consult an electrician to choose the appropriate outlet 2 Power Cord Protection The power supply cords should be routed to avoid being tripped over or a pinch spot DO NOT handle the plug cord fixture if your hand is wet and always grasp the plug body when connecting or disconnecting it 3 Installation Install indoor only and use the attachments hanging kit and accessories provided and specified by the manufacturer Operation 1 Operation Always follow the operation instructions set forth in this manual when using this system 2 Heat The product should be used away from heat sources such as heat vents and don t expose to excessive heat such as direct sunshine fire etc 3 Moisture To reduc2. e the risk of fire or electric shock do not expose this product to rain moisture dripping or splashing 4 Ventilation The product should be installed properly so that its location or position does not interfere with its proper ventilation 5 Magnetism The product should be used away from equipment or devices that generate strong magnetism 6 Cleaning Clean only with dry cloth Display Description Remote Control Receiver Dimmer Knob Display Current Time X 24 hour display the digital time is a 24 hour clock 00 00 to 23 59 no AM or PM is shown on the LCD Three Main Menus t Bij Channel One 2 Du 2 Bj Channel Two 3 cE le Timer Setup X Timer Function ONLY works in the H S Menu This system doesn t control the light to Power ON OFF in CH 1 and CH 2 Timer Setup Step 1 an bi Channel One Power On r Step 2 aF al Channel One Power Off Step 3 LZ an al Channel Two Power On Step 4 re E Bill Channel Two Power Off Step 5 wa r bi Clock Setup LL A Remote Controller Description Power ON OFF Select Menus c on Channel One Power On Gen Channel One Power Off c2on Channel Two Power On c20FF Channel Two Power Off oa Clock Setup B Preview Timer Setup Functionslnstructions Remote Controller 1 Power ON Plug in there are two ways to turn on the system Pre
3. immer Knob to set minutes when the right part is flickering from 00 to 59 Clockwise rotation once will increase one minute anticlockwise once will reduce one minute C1 ON Setup is finish Waiting for 3 seconds it will Bijl Press the automatically return to previous menu gt Bi Press the Dimmer Knob in time to set C1 OFF gt E H aF or it will return to previous menu gt Repeat the same procedures used making C1 ON Setup to set C1 OFF C2 ON and C2 OFF Functions Instructions Dimmer Knob 2 Clock Setup This step is used to set local time current time WEE Press the Dimmer Knob to skip CH 1 and CH 2 gt H LE Rotate the Dimmer Knob SIE ton Epress the Dimmer Knob to skip C1 oF C2 on and C2 oF EL of al Rotate the Dimmer Knob to continue El Rotate the Dimmer Knob to set current hour when the left part is flickering from 00 to 23 Clockwise rotation once will increase one hour anticlockwise once will reduce one hour Swap to minutes setting by one short press on the Dimmer Knob es dl Rotate the Dimmer Knob to set minutes when the right part is flickering swap from 00 to 59 Clockwise rotation once will increase one minute anticlockwise once will reduce one minute Clock Setup is finish 3 Intensity Setting Channel One intensity setting id 2 Press the Dimmer Knob gt MH bl Rotate the Dimmer Knob gt Rotate the Dim
4. mer Knob to change the intensity Clockwise rotation once will increase 1 gt Dar J while anticlockwise rotation once will reduce 1 gt Ly J Press the Dimmer Knob to save setting WARRANTY CARD Date Purchased Serial Number Your Name Email Address Your Address Zip Postal code Phone Timer Control LED Lighting System
5. our Timer Setup is C1 ON 14 00 C1 OFF 23 59 C2 ON 14 30 C2 OFF 22 00 The sequence of the display is shown as follows 3sec between each display Cion gt 14 00 gt C1oF gt 23 59 gt C2on gt 14 30 gt C2oF gt 22 30 5 Intensity Setting Channel One intensity setting 2 Ef ees EX s E zZ 5 B Press CD will increase 1 while press CP will reduce 1 Press d to continue gt Press GR to save the intensity and finish setting Repeat the same procedures with CH 1 Setting to set CH 2 X The intensity of CH 1 amp CH 2 in H S will automatically update whenever you change and save the intensity via CH 1 and CH 2 4 Functions Instructions Dimmer Knob 1 Power ON Plug in press the Dimmer Knob once to turn on the system 2 Power OFF Press the Dimmer Knob and hold it at least 3 seconds to turn off the system under any status 3 Timer Setup Setting sequence C1 ON gt C1 OFF gt C2 ON gt C2 OFF gt Clock Setup 1 C1 ON Setup BI Press the Dimmer Knob gt i oi i gt Dimmer Knob EH 2 gjpresstne Dimmer knob Rotate the Dimmer Knob gt 7 an Rotate the Dimmer Knob to continue gt al Rotate the Dimmer Knob to set hour when the left part is flickering can set from 00 to 23 Clockwise rotation once will increase one hour anticlockwise once will reduce one hour Swap to minute setting by one short press on the Dimmer Knob gl Rotate the D
6. ss once or Press R and hold it at least 3 seconds to turn on the system 2 Power OFF there are two ways to turn off the system Press amp once or Press and hold it at least 3 seconds to turn off the system X This system has an Automatic Memory Function It operates in accordance with the last setting before the shutdown 3 Timer Setup Setting sequence Clock Setup gt C1 ON gt C1 OFF gt C2 ON gt C2 OFF X C1ON must earlier than C1 OFF C2 ON must earlier than C2 OFF 1 Clock Setup Press gt EL ak Press to continue gt 2 2 lt will increase one hour while press Gp will reduce one hour 3 Press FunctionsInstructions Remote Controller Swap to minute setting by one short press on 9 and then repeat the same procedures used making hour setting It will automatically save setting and return to previous menu if no action is taken for 3 seconds 2 C1 ON Setup Press gt r Am J Press eo continue gt if al Press lt D will increase one hour while press ID will reduce one hour Swap to minute setting by one short press on 9 and then repeat the same procedures used making hour setting It will automatically save setting and return to previous menu if no action is taken for 3 seconds Repeat the same procedures used making C1 ON to set C1 OFF C2 ON C2 OFF 4 Timer Setup Preview Press feen once to glance over your setting For example y
Download Pdf Manuals
Related Search