MEITRACK RFID User Guide
Contents
1. Batches 1 On the main interface choose Management 2 On the Management window that is displayed select Sending command from Use Normal The Sending command window is displayed 3 Select one or multiple trackers select the Delete authorized RFID numbers in batches command specify From the RFID number and Quantity and click Send command If only one authorized RFID card needs to be deleted set Quantity to 1 E Copyright 2015 Meitrack Group All rights reserved 8 Q meitrack MEITRACK RFID User Guide Sending command Search key eg GPRS fences A10 Q M Group DEE E MT90 Total 2 Command Delete authorized RFID numbers in bat From the RFID number Quantity E T1 Total 1 T1A 3505 E T355 Total 1 6 4 3 Managing RFID Cards To collect statistics on drivers driving records by driver I O status report the first is to add driver information and bind a driver to a RFID card 1 Add a driver On the main interface choose Management On the Management window that is displayed select Driver Info from Use Normal The Driver Info window is displayed Click Driver info On the Add driver window that is displayed add driver information and click Submit 98 river a name sem com one Dring Bemmel mm Name 4 o Birthday 1970 01 01 Gender Man Phone Mobile phone Driving license No ID No Photo Bi Upload2. photo Copyright 2015 Meitrack Group All rights reserved 9 werner Gomeitrack Driver info Q 7 x Show the big picture move mouse Birthday Gender Mobile phone Birthday Driving licens 2 Add a RFID card On the Management window select RFID card from Use Normal The RFID card window is displayed Click be included in a driver 1 0 status report On the Add an RFID window that is displayed set the RFID card number and bind a driver These information will RFID card Add an RFID RFID number Added number 1 Driver Add driver RFID card Driver T Creation date Note 1 To manage RFID cards driver information must be added first 2 You can query a driver s driving mileage parking duration and time and location of starting the vehicle by driver 1 0 status report Copyright 2015 Meitrack Group All rights reserved 10 MEITRACK RFID User Guide 7 Querying Reports on MS03 7 1 Event Report 1 Onthe main interface choose Reports 2 On the Reports window that is displayed select Event report from Use Normal The Event report window is displayed 3 Select a tracker and RFID from the Event drop down list set the query time and click readers will be displayed as shown in the following figure Reports Use Normal Event report Travel report Scheduling screen upload info Event report Event __ RFID Deu e P S ISEI d TA Event stati
3. 57151 0 00 00 09 Note In this report input 3 is connected to the engine detection cable You can obtain the driver s driving duration mileage and parking duration from this report 8 Firmware Version O 11 firmware supports standard version and RFID version Standard version The firmware can be compatible with the Copyright 2015 Meitrack Group All rights reserved 12 Q meitrack MEITRACK RFID User Guide handset LED display LCD display and camera RFID version The firmware can be compatible with RFID RFID reader card only Ti Y50V131 Ti Y50V157 The firmware supports RFID version T1_Y50401 or later The firmware supports RFID version T1B_V001 or later The firmware supports standard version and RFID version You can select a peripheral by Meitrack Manager as shown in the following figure Device Tracking GeoFence Authorize GPS Log Device Info IMEI 867144025097815 Rename Firmware T1B_H101V007 Battery Left a ttt Quick Setting o Light Off g Engine Check Move Static g Turn off Call Ringtone O RFID Control Out1 ol a ao oa fri Sleep Mode No Sleep O Normal Sleep O Deep Sleep Flash Data sms gt Loodts PR 0131072 GPRS 018192 Other Setting Device Type Pa Log Interval 0 Seconds Serial Device RFID e LEDSCREEN Auto Connect Auto Upgrade A21 Check Device Automaticlly Yes would like to receive automatic updates about new features O Set Device Conn
4. Q meitrack MEITRACK RFID User Guide MEITRACK RFID User Guide Applicable Model T1 T333 MVT600 Q meitrack MEITRACK RFID User Guide Change History Creation Date 2013 10 16 Update Date 2015 09 09 Project T1 T333 MVT600 Subproject Accessory User Guide Total Pages Copyright 2015 Meitrack Group All rights reserved 2 Q meitrack MEITRACK RFID User Guide Contents TOO USE fale RD sto pg e RO RIR is cca ce nasa a OR ye senate et a E 4 2 SH SCIMICATU ONS vaccstescesnssvanecvawcatecsacedinssavnasssensoasessanousedsnendansdesinatsstatsavuodevaandedaxdodaesesboduabassesworaxedtiedaadesSevesvolvenessonsessapisdaddadedededasdeteasannel 4 ADOPTANT 4 AE RIF PAGES a ee means Ga 4 5 installing the RFID Reader scovccencsnsacnnacewasdeasowastessnvecanstntedunsaebeddunsmbiessuns EONENNEK ELTETE TELETELE EEO aa ei eiia 5 5 1 Attaching the RFID Reader to Your Vehicle cccccccesssccecceseececcesececcaesecceseesecccseeueceesaeseeeeseeaeeeesueaecessuaecessunaeeessagaeeeesages 5 5 2 Connecting the RFID Reader toa Tracker sascha rede rbd iai ad Diria dd 5 CS EF ee E ED OAA A NE 6 6 1 RFID Control Output 1 Starting the EMSINe siccosccssacevarcwasanaswcncewasevsavinenaaciiavswnectaecsasshabenadabdeeinsetnadeseahdeenadsbensrmactdeesacatensensers 6 6 2 MOW RAD WOR S een Eora nE as ENE EEE EEEE ENAS ANEA ee EASE E ne are EEES EEE E 7 6 3 Contleuring REID by Meltrack Mahager scavessiceuressxccaveanncoupe
5. aveceassasncsuvsanieonreannseuerenteadseistacbminsiaanyesausenmestaanueeamsaumioussanyeesasanwel 7 64 Configuring REID by MSOS issxcisvanessicssaxaanddvasnasisapaxansdduasprswassebeaddeunnedsassxpuadesnnneinbdtbnaddencestnbbadastdpuncetdenGavanedbuassadevesetaedbuassituibat 8 6 4 1 Authorizing RFID Cards in Batches 0 00 040200000050 00000 04000000000 00000 ronen ke anna anne aa ahnen nein ahnen nennen 8 6 4 2 Deleting Authorized RFID Cards in Batches ccccccccsssecccceseccceeesscceceuseecessuseecessueecessueseceesuesecessuaeeceesaaeseessaeasees 8 oA VV REJD Cams assar centre ne cst ca cure cers tc ee O Eee 9 ZIWEIVME REPOR On M503 ee ee tds 11 PEER R OT RR nce seat RR a RAR rer e O DE E SR RS 11 7 2 Driver 1 0 Status Report cccccccccccccccccccccecceeeceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeeeeees 12 BF RAN As SON eee E RR ea a 12 Copyright 2015 Meitrack Group All rights reserved 3 Q meitrack MEITRACK RFID User Guide 1 Copyright and Disclaimer Copyright 2015 MEITRACK All rights reserved Gmeittack q O are trademarks that belong to Meitrack Group The user manual may be changed without notice Without prior written consent of Meitrack Group this user manual or any part thereof may not be reproduced for any purpose whatsoever or transmitted in any form either electronically or mechanically including photocopying and
6. ection COM9 ONo don tneed it Upgrade Restore Factory Settings Export Settings Load Settings Show Description 17333 firmware supports standard version and RFID version Standard version The firmware can be compatible with the handset LED display LCD display and camera RFID version The firmware can be compatible with RFID RFID reader card only T333 Y50VOOS or later The firmware supports RFID version The MVT600 firmware can be compatible with RFID RFID reader card only If you have any questions do not hesitate to email us at info meitrack com ee Sass Copyright 2015 Meitrack Group All rights reserved 13
7. ew features u O Set Device Connection COM9 ONo don t need it show Description gt ES O ESESEZSZSSE CO PZ PPP o SEREeegzoEOOOEBEEBE EES Copyright O 2015 Meitrack Group All rights reserved 6 Q meitrack MEITRACK RFID User Guide Sending command Search key eg GPRS fences AlD Group CORRE E MT90 Total 2 Command RFID control output 1 E MVT380 Total 1 E MVT600 Total 1 E T1 Total 1 T1A 3505 Ei T355 Total 1 6 2 How RFID Works After swiping the authorized RFID card on the RFID reader the driver must start the engine within one minute Otherwise input 1 of the tracker will be triggered engine cut off and thus the driver cannot start the vehicle At the moment if you want to start the engine you must swipe the RFID card again 6 3 Configuring RFID by Meitrack Manager 1 Connect your tracker to a computer and run Meitrack Manager 2 Meitrack Manager will automatically detect the device and the Device tab page for default parameters is displayed 3 Select Authorize On the tab page that is displayed select RFID on the GPRS column GeoFence GPS Log Event SMS Header Value GPRS Photo Osms Ocal Cisms Ocal Osms Ocal F 0 ap En JoU ee ven Heading Change Heading Change 0 Degree o F 0 m Distance Interval Tracking Distance o m o oO u M Rep
8. ly Location Passive Now E o z oO d o d Time Interval Tracking Interval x Tow Tow 0 Seconds 4 7 RFID M o Still Quiet OD d 0 M Move Moving o oO o 4 GSM Jammed Customized GSM Jammed OD a oO M Fuel Fulled Fuel Full P a oO 7 Fuel Empty Fuel Empty o d 0 M Fuel Stolen Fuel Steal o O c M GSM No Jamming Customized GSM No Jamming o 0 o 4 Reject Incoming Call a o al Copyright 2015 Meitrack Group All rights reserved 7 Q meitrack MEITRACK RFID User Guide Note If this RFID option is deselected the MS03 platform cannot collect statistics on RFID event reports after you swipe a RFID card The RFID event is enabled by default 6 4 Configuring RFID by MS03 6 4 1 Authorizing RFID Cards in Batches 1 On the main interface choose Management 2 On the Management window that is displayed select Sending command from Use Normal The Sending command window is displayed 3 Select one or multiple trackers select the Batch RFID authorization command specify From the RFID number and Quantity and click Send command If only one RFID card needs to be authorized set Quantity to 1 Sending command Search key eg GPRS fences A10 Group DRE E MT90 Total 2 Command Batch RFID authorization rom the RFID 5437501 number Quantity MTIDtest E MVT380 Total l E MVT380A00671 E MVT600 Total 1 E T1 Total 1 Mi T1A 3505 E T355 Total 1 6 4 2 Deleting Authorized RFID Cards in
9. recording Meitrack Group shall not be liable for direct indirect special incidental or consequential damages including but not limited to economic losses personal injuries and loss of assets and property caused by the use inability or illegality to use the product or documentation 2 Specifications Dimension 79 mm x 42 mm x 13 mm Weight 150g Power consumption 25 mA Operating temperature 20 C to 55 C Operating humidity 5 95 Operating voltage 5V Internal resistance 3 6R 3 Appearance RFID reader RFID card 4 RFID Functions Identify the driver ID and grant permission to start the vehicle Through MS03 platform driving habits can be evaluated by driver I O status history Copyright 2015 Meitrack Group All rights reserved eo Q meitrack MEITRACK RFID User Guide 5 Installing the RFID Reader 5 1 Attaching the RFID Reader to Your Vehicle Attach the RFID reader to your vehicle according to your needs 5 2 Connecting the RFID Reader to a Tracker Plug the RFID reader connector into the dedicated port of a tracker Dedicated RS232 ports of the T1 T333 are as follows 2 13 1517 24 6 8 USB Handset RFID Dedicated Wiegand 26 ports of the MVT600 are as follows 1 3 24 Comes Came RS222 RFID RFID reader s status after it is connected to a tracker After the RFID reader is connected to a tracker T1 T333 MVT600 power on the tracker then
10. stics Cm 4 Mileage statistics Driver 10 status report Yesterday Front 2015 08 1C 00 00 To a nome Momo Game Homme Terre taten tide Logie Historical data 1 Sensor average Sensor report K Maintenance report TC685 User operation record Copyright 2015 Meitrack Group All rights reserved 2015 08 10 A TATA F gi IO status report Statistics report 23 59 Address Parking report Photo report Transfer credit reports 18H ES The results about RFID 11 meit K MEITRACK RFID User Guide 7 2 Driver 1 0 Status Report 1 On the Reports window select Driver IO status report from Use Normal The Driver IO status report window is displayed 2 Select a tracker or driver set the I O status and query time and click lt The driving records will be displayed Reports Use Normal mrt Event report Event Historical data Speed curve 5 Parking report statistics La E Ri a E e Travel report ile Sensor report Sensor I O status Photo report average report K EE Scheduling Driver TO Maintenance Statistics Transfer credit screen upload status report report TC68s report reports info Driver IO status report E Tracker name C T1A 3505 Input3 All Active gt Inacti From 2015 08 1C 00 00 To 2015 08 11 HE g tracy 2015 08 10 17 40 23 2015 08 10 17 40 32 22 513586 114 057153 22 513585 114 0
11. the indicator of the RFID reader will blink red When you swipe the RFID card on the RFID reader the indicator of the RFID reader will blink green and a beep sound will be heard In this situation data recording starts Copyright 2015 Meitrack Group All rights reserved 5 GC meitrack MEITRACK RFID User Guide 6 Using RFID 6 1 RFID Control Output 1 Starting the Engine Before starting the engine ensure that 1 Input 3 of the tracker is connected to the engine detection cable 2 A RFID card has been authorized 3 Input 1 of the tracker is connected to the engine control cable through a relay as shown in the following figure VCC White cable IN 3 Red cable Start 30 ON 87 87a Green cable 86 Green cable ACC 4 Yellow cable OFF LEPA EKETA LACT Yellow cable x Engine Note For details about how to authorize a RFID card see the section 6 4 1 Authorizing RFID Cards in Batches 4 The RFID control output 1 function has been enabled by Meitrack Manager or MSO3 GPS Log Device Info IMEI 013950003773505 Rename Firmware T1_EY50H301V406 noi nm Quick Setting O Light Off JEngine Check Move Static C Turn off Incoming Call RFID Control Out Sleep Mode No Sleep O Normal Sleep O Deep Sleep Other Setting nn Log Interval Seconds me 8 Auto Connect Auto Upgrade Check Device Automatic ly ves would like to receive automatic updates about n
Download Pdf Manuals
Related Search