user manual
Contents
1. S zc Master Power gt OFF ON A D1 DRONE MODULAR SURFACE MOUNTED CONTROL PANEL SRG AZ Mounting Location D1 DRONE INSTALLATION STRING RESONANCE GENERATOR Mounting Location D1 DRONE MIRROR SYSTEM INSTALLATION SRG AS XL6 U Mounting Location DX INSTALLATION STRING RESONANCE GENERA 1 3 Functions The D1 Preset Panel features 3 Preset modes of operation for each string channel Normal Mode e Mode high pass filter LPF Mode low pass filter HPF Mode attenuates low frequencies and enhances harmonics LPF Mode attenuates high frequencies by 26 dB with the effect of a bass boost which produces a cello effect on heavy gauge strings The D Trigger Panel has 1 MUTE switch and 1 Trigger for each channel The Latch switches are in MUTE mode in the forward position towards the D1 and in UN MUTE mode in the backward position away from the D1 The triggers UN MUTE a channel when the latch switch is in MUTE mode 1 4 Versions The D DRONE is available in 4 standard versions TYPE 1 SUITABLE FOR TELECASTER STYLE GUITARS 7 oe 8418 988 Mirror Versi on TYPE 2 SUITABLE FOR STRATOCASTER STYLE GUITARS Pedal Controller Versi on TYPE 3 SUITABLE FOR ALL G2. AE S C H C FR HANDIVIADE IN THE EUROPEAN UNION C 2015 RESCHER EUROPA 42 SRG lt STRING RESONANCE GENERATOR D1 DRONE User Manual D Series rev 3 0 1 SET UP 1 1 Overview 1 2 Power Supply 1 3 Functions 1 4 Versions 2 OPERATION 2 1 Instrument Compatibility 2 2 Mounting 2 3 Controllers 2 4 Onboard Effects 2 5 Maintenance 1 SET UP 1 1 Overview The SIRG D Series are a line of instrument mounted externally powered string resonators based on nano scale SMDI architecture Available in monophonic and polyphonic models The D1 DRONE isa 6 channel polyphonic resonator for guitar The SRG D1 DRONE package includes D DRONE Surface Mounted String Resonator XLO U Above String Divided String Sensor Kit DX Power Supply Channel Expander Auxilliary 1300 mA 12 V DC Adapter 3x 9 Volt Alkaline Manganese Primary Cells Mounting Velcro The D1 features 6 highly inductive low resonant frequency sensor coils and 6 highly inductive driver coils directly wound on high flux density neodymium core magnets The DT also features 6 ultra bright deep blue LED power indicators SET UP gt After unpacking the box remove the 2 backing strips from the mounting velcro for the D1 Transducer Module and apply the velcro to the instrument directly under the strings ideally below the instrument neck pickup with the strings aligned with the LEDs on the Transducer Module as illustrated on page After apply
3. UITARS Internally Installed Versi on TYPE 4 SUITABLE FOR ALL GUITARS 2 OPERATION 2 1 Instrument Compatibility The SRG functions on any guitar with ferromagnetic strings including plain steel strings and steel core strings and a bridge saddle spacing of 12 mm The SRG D Series are also capable of driving Acoustic Steel String Instruments 2 2 Mounting The SRG D Series includes both internally mounted and surface mounted models The is an internally mounted SRG which requires permanent installation by a professional Luthier The isa surface mounted SRG designed to be quickly and easily mounted without modification to the instrument using self adhesive velcro The XLG U Above String Divided String Sensor mounts over the drivers on the D Transducer Module The XL G U Kit includes the Adapter for the Roland VSystem 2 3 Controllers Operating Modes and Master Power on the D are controlled by the Preset Panel Each individual channel resonator will initiate immediately after switching the channel power switch or channel trigger on the Trigger Panel ON Alternatively the DI can interface with the 21 pedal controller which has all the functions of the mounted system in foot pedal form The D 1X pedal controller is recommended for the Fender Stratocaster and other instruments with insufficient space on the right side for the D control panel The D System can also be p
4. ight without velcro Mass 11 mm 3 W 2300 Hz 2300 Hz Neodymium mA 330 mA 46 dB 26 dB 0 2 15 25 C 0 35 C 161 mm 124 mm 11 mm 9 mm 280 g STRING RESONANCE GENERATOR AES CHER
5. ing the velcro strips mount the DT Transducer Module with the LEDs pointing towards the fingerboard Each of the 6 LEDs should align with the string below it The D4 should have a string clearance of at least 1 mm after mounting It may be necessary to adjust the height of the saddles Next plug the Trigger Module into the 12 pin socket on the left side of the D Transducer Module Then remove the backing strip from the padding velcro for the Control Module and apply the velcro strip to the space to the right of the 21 Transducer Module then plug the 34 pins on the Control Module into the 34 pin socket on the right side of the BD Transducer Module After fully mounting and connecting the 7 System remove the backing strips from the mounting velcro for the Power Supply Apply the adhesive velcro strips to the back of the body in any suitable location on the front of back of the instrument Before connecting the DC cable check that the Master Power Switch on the Control Module is in the OFF position Then mount the DX Power Supply Slide the three 9 volt batteries into the battery connector as illustrated on page 7 Then onnect the DC cable first to the Control Module and then to the DX1 Power Supply The XILB U mounts with velcro on top of the Control Module with the XL6 U extending over the strings as a cantilever The cable is hardwired to the XILB U and the 13 pin DIN connects to the Channel E
6. roduced in a mirror image configuration with the Trigger Module on the right side and the Control Module on the left which works perfectly on Stratocaster guitars U XL6 Anslogue Channel Output A Anslogue Channel Output B 5 5 4 s a 5 5 A a a A A A A A Pods Suis HPF HPF HPF HPF HPF HPF NORMAL NORMAL NORMAL NORMAL NORMAL NORMAL LPF LPF LPF LPF LPF LPF D1 gt D1 PEDAL CONTROLLER SRG 2 4 Onboard Effects The 1 has 2 Effects HPF Mode high pass filter Harmonic e LPF Mode low pass filter Bass Boost Optionally The 1 can also be produced on request with Hyperdrive which engages a bank of 6 x 1 Watt M21 Resonator Engines 2 5 Maintenance If possible always store the SRG in a dry dust free environment at room temperature 15 20 C Always remember to turn the Master Power Switch on the OFF when not in use Clean the SRG using a soft cotton cloth or t shirt soaked in warm water Never attempt to clean any part of the SRG with alcohol acetone ammonia or any household cleaner TECHNICAL SPECIFICATIONS SRG MODEL D1 Pole Spacing Supply Voltage Power Output Driver Resonant Frequency Sensor Resonant Frequency Core Magnets Quiescent Current Drain Operating Current Drain Voltage Gain LPF Attenuation THD Storage Temperature Operating Temperature Width Length Height mounted He
7. tment until firmly connected If the LEDs do not light or flicker either 1 or more batteries are not firmly connected or 1 or more batteries may be weak or dead The DX includes three 9 volt Alkaline Manganese primary cells which are safely disposable Under No Circumstances is the battery to be recharged or dismantled The storage life of the battery is 5 years Do not install a rechargeable NiMH battery as rechargeable 9V batteries actually supply only 8 4 volt rather than 9 volt The DT requires a full 9 volt at 330 mA for stable operation WARNING Damage resulting from the use of rechargeable batteries oversized batteries or incorrect installation can invalidate the warranty JOSULOJ Channel Balanced Litzwire Cable D1 Drone PS 1 Power Cable XLG U 13 pin DIN Connector DC Connector Y 1 Battery Connectors 0 4 O Channel 1 lt e lt Q Channel 2 0 lt Q Channel 3 g lt O Channel 4 0 lt Q Channel 5 lt g e 4 O Channel 6 Velcro Layer 13 pin DIN Connector DC Connector Dx 6 CHANNEL EXPANDER POWER SUPPLY SRG AS STRING RESONANCE GENERATOR S E c XL6 U ui Mounting Velcro E OFF ON Triggers orma 4LPF HFP
8. xpander on the back of the instrument or to the VX adapter D1 DRONE Trigger Module features 6 onboard channel switches and 6 channel triggers easily accessable during performance The Preset Module has 6 channel mode preset controls for Normal Mode HPF Mode and LPF Mode To Enable Normal Mode slide upper and lower switches towards each other To Enable LPF Mode slide upper and lower switches towards the player To Enable HPF Mode slide upper and lower switches towards the stage The DI is fully operational the moment the 6 blue power LEDs are illuminated The DX1 Power Supply Channel Expander may be mounted on the front or back of the instrument Optionally a 12 volt 1300 mA DC adapter may be used as an alternative power supply with the 1 used only as a channel expander 1 2 Power Supply The DX features an ultra fast slide in battery compartment for three 9 volt primary cells Eliminating the frustration of fumbling in the dark with clumsy floppy wire 9 volt battery connectors the slide mount battery port allows rapid battery changes in as little as 5 seconds The 3 batteries are connected in parallel and will discharge together at a constant rate Always check that the master power switch on the Preset Module is in the OFF position before installing the batteries and that the polarity is correctly orientated as illustrated on page 7 Slide the included 9 Volt Batteries into the battery compar
Download Pdf Manuals
Related Search