USER Manual
Contents
1. Embed the drain hose into the groove with oa hands Take care not to damage the drain ETATE Figure 3 hose in fastening the fixing clamp spin tub side Embed into the groove in turn N Install the water inlet hose Select the water level Insert the water inlet hose into the water filling entrance on the control panel directly pull it out to dismantle it Water inlet hose Select water level according to the quantity of the laundries Set the water level adjusting lever Water level Water inlet to needed line mdicaior eS Use the new water inlet hose provided Maximum_Max cH with the machine to connect to the d n Me water faucet Old hose sets should Medium grm not be reused Minimum gt Haier Preparation before washing Check if the laundries has special requirement on washing Clear the pocket Take out the coins sand hairpins etc Zs Q A2 Preparation before washing 1 Connect the water inlet hose 2 Confirm that the washing machine is earthed reliably Then insert the power plug into the receptacle Do not connect the earth terminal to the gas pipe and tap water pipe 3 Put down the drain hose 4 Slanting or uneven ground may result in unstable working or abnormal noise Please make the machine stand horizontally The quantity of the laundries shall not be too large Stretch and loosen the laundries befo2. Ptah ee Are the laundries In spin tub over e Remove a little laundries ifs eae e parts Safety precautions Specification Installation and adjustment Preparation before washing F Rated voltage frenquency 220V 240 50Hz N Dos and don ts Water level Water quantity estimated L Maximum 48 Medium 39 Minimum 33 Usage of the detergent Largest washing capacity kg 6 5 HWM65VA 6 8 HWM68VA Washing sequence Maintenance Standard washing eapaety kg Trouble Shooting Answers to question Standard spinning capacity kg 4 5 Specification Injection pressure MPa 0 02 0 2 J Specifications may be subject to change without prior notice 14 0030807643 Packing list Name Quantity User s manual One piece Warranty card e One piece One piece Lint filter Rae One piece Gland One piece Semi Auto washing machine e One set Haier Cleaning the protective cover 2 cleaning dirty under the protective cover take out the sundries using the plier or other wiry 3 install the protective cover after cleaning install it as origin assure it reliable Disposal of the complete unit e After washing dismount the water inlet Wipe the complete unit with soft hose cloth twisted dry Do not store water in the tub for long period Discharge the water immediately af
3. Haier Trouble shooting Answers to question If there s breakdown please pull off the power plug before checking The following phenomena are not breakdowns sometimes Please confirm again before sending it to repair If there are real breakdowns please come to the special maintenance department or after sale service department of our company Do not repair it by yourself SEMI AUTO WASHING MACHINE HWM65VA HWM68VA Haier Phenomena The reason How to settle Is there power failure Is the power plug loose Is the pulsator twisted by foreign materials e Use it when the power is on e Insert the power plug tightly Remove the foreign materials The machine does not function Has the drain hose being laid down Is the drain hose blocked by foreign material Are there any laundries trapped at the outer side of the spin tub Put down the drain hose The draining does e Remove the foreign material not function e Please contact the after sales service department Manual i USER WASHING MACHINE e Are there hair pin coins or metal items brought inside the tub e Remove the hair pin coins or metal items There s abnormal sound during washing CONTENTS Is the machine slanting e Pressed the gland evenly There s abnormal sound and violent Is the gland pressed evenly Are there any laundries trapped e Level the machine properly Remove the laundries
4. as the figure take down the protective cover as the arrowhead way S 12 Haier Names of the parts Wash selector Wash timer Water inlet Outer cover of the spin tub Control panel Inner cover of the spin tub Overflow filter F Major frame Water level adjusting lever Spin tub Lint filter Installed by user Valve cover Pulsator Wash tub Drain hose protective cover Cabinet Wash tub cover Base frame Meaning and description of the symbols Contents marked with that symbol are related to the safety of the product and the personal safety of the users Please operate in strict conformity to the contents otherwise it may cause damage of the machine or injure the personal safety of the user Warning sign Contents marked with that symbol are actions forbidden to perform Performing of those actions may result in damage of the machine or injure the personal safety of the user Forbidding sign Please check if the power receptacle has good earthing condition before using to guarantee your safety Haier Safety precautions Please insert the power cord into special receptacle with rated vol tage Be sure to use single phase three pins receptacle The earthing terminal of the receptacle must be earthed reliably If possible please When the machine is normally using please put the power plug at the location easily to be insert ed and e
5. g water level for laundries less than 1 0kg so as to avoid splashing of water It is suggested not to use high sudsing detergent Usage of the detergent How to use the whitener Fill water to decided level Dilute the whitener with container Pour it slowly into the washing tub e Avoid using whitener on laun dries with color or pattern as they are prone to lose color The whitener shall not touch the laundries directly Refer to the user s manual for the usage and quantity of the whitener e For powder whitener please dissolve it before using How to use the washing powder Direct dissolved in the machine 1 Fill small quantity of water 2 Add the powder Run for 30 seconds to dissolve it completely 3 Putin laundries Select suitable water level The instant dissolving of the washing powder 1 Prepare warm water of 30 C and a container 2 Add the powder while stirring to fully dissolve it The powder is more prone to pollute the laundries than the detergent Therefore please use it with proper quantity e Dosage of different washing powder is different Please refer to the instruction of the washing powder for the detail dosage
6. ight of the drain hose shallbe AA less than 10cm or the drainage will not be smooth enough and cause incomplete drainage 2 Do not tramp or press the drain hose 3 If the drain hose is too long cut it at mid point To make smooth drainage cut the front end of the hose slantingly 5 Ce o lo Q ZZ 4 lf extra drain hose is needed please make separate purchase The inner diameter of the extra hose shall not less than 30mm and the length shall not exceed 1 5m If the extra hose is too long cut it either at point Aor B Midway spinning 1 Put the laundries into the spin tub evenly and smoothly 2 Spin 1 Put the gland in properly Please put in the gland properly even if the laundries quantity is small Push Gland Proper The laundries Proper No gland are slanting 2 Close the inner and outer cover of the spin tub 3 Spin for 1 2 minutes Outer cover of the spin tub Inner cover of the spin tub Rinsing Rinse with water filling 1 Put the laundries Put the laundries into the wash tub Select suitable current according to the laundries 2 Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity Then fill suitable water continuously 3 Rinse Adjust the wash timer to 5 7 minutes to do rinsing Haier Washing sequence g oO oO Wash timer Wash selector Spin timer To set to below 2 minute Strong current WATER INLET m set to 5 mi
7. ng it will pause the work if you open the outer cover of the spin tub Close it to resume the spinning 10 Do not stretch hands into the working machine It is dangerous even if the rotation is slow Take special care of the children Haier Safety precautions Do not decompose repair or alter the machine by yourself Do not put any hot or heavy items such as the kettle with hot water on the washing machine Do not wash laundries with volatile materials such as thinner petrol etc Handicapped or children without care shall not use the machine To protect your laundries and wash ing machine please take out all of the coins buttons sand hairpin and other foreign materials before washing Ee Se Keep the machine away from direct sunlight and heat source like the Please check ifthe connection of the water inlet pipe is proper t is suggested to use foamless washing powder Hales installation and adjustment Please install and adjust the machine according to the requirement of the manual It is very important to your security and correct operating the machine Install the lint filter After opening the package please take out the lint filter from the document bag install it to the overflow filter of the wash tub See to the figure Overflow filter Jd Lint filter Usage of the drain hose The drainage shall be smooth with the drain hose 1 The he
8. nute then Hron current a set io Slow T minute turn it back it can increase the service life of the timer tum it back it can increase WASH SELECTOR SPIN TIMER 1 Fill the water and add the dissolved washing powder to make the water level reach the preset position Figure 1 Run washing program for some time to stir and dissolve the powder completely 2 Put in the laundries If the water quantity is insufficient please add water Figure 1 WASH SELECTOR Figure 2 3 Select the current Select the strength of the current according to the laundries Figure 2 4 Select the washing time Select the washing time according to the laundries Figure 3 5 After washing Set the WASH SELECTOR Z N at DRAIN Figure 4 WASH SELECTOR Figure 4 the service life of the timer mi H q ie How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose ae TN ac Soft item N Put soft items on the ground Lean the machine down gently with the front surface facing the ground Take off the drain hose from the cabinet Take the hose out of the fixing groove See to Figure 2 6 Fie Soft item Embed the drain hose into the groove along the side of the spin tub in the order of 1 3 heading for the side of the wash tub See to Figure 3
9. re putting them in the tub Q Tie the long strips fasten the buttons close zippers is running the buttons of the laundries may cause noise For the sake of discretion please put the laundries with buttons into other laundries a00M Check if the laundries are applicable for washing with machine Divide the laundries that are not colorfast from other laundries Put those laundries difficult to absorb water into water with hand For those laundries with heavy soil please first remove the dirt like mud or dust For the parts with heavy soil please apply detergent on them in advance which can make it easier to remove the soil e For those laundries that may get lint ball and those with long fur turn it over before putting in f Do not put those laundries polluted by chemicals into the washing machine directly Haier Do s and Don ts Do not select Maximum The capacity of washing and spinning of the machine refer to the weight of the standard laundries under dry condition that can be washed or spinned in one time Laundries quantity in one washing cycle shall be lower than the standard capacity the largest capacity is only the loading capacity of the drum The thickness size type of the cloth will influ ence the actual washing capacity Itis suit able to put in reasonable amount of laundries and the laundries can be turned round in wash ing for one time washin
10. ter each using Do not wash it directly by water Pull off the power plug and hang up the power cord Hang up the drain hose Wipe off the water drops on the surface and inside the tub with clean soft cloth Open the cover of the wash tub and the inner outer cover of the spin tub for some time about one hour then close them Wipe with neutral detergent if too dirty Trouble shooting Answers to question If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub Please contact the after sales service department 13 Haier Cleaning the overflow filter Take off the corrugation pipe Dismantle the upper part of the corrugation pipe inside the Water level overflow filter as indicated in Figure 1 gt Cleaning the overflow filter Clean the lint around the filter and flush with tap water Figure 1 Install the overflow filter 1 Install the corrugation pipe 2 Insert the mounting plate at the bottom of the filter into the valve cover 3 Hang up the hook at the left upper side 4 Push the upper part in as Figure 2 indicated in Figure 2 Cleaning the protective cover adjusting lever Corrugation Pipe During washing clothes must use protective cover Finished washing everytime please clean lint on the surface Please clean lint under the protective cover termly Cleaning method 1 Push
11. water and clean while it is still wet See Figure 2 3 Install the lint filter After cleaning insert the bottom Figure 2 of the lint filter marked with down side into the overflow filter then push the upper part of the filter in marked with up side See Figure 3 Figure 3 Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine Please clean it every two months oe Elastic fixing claw As indicated in the figure nip the elastic fixing claw and pull it to the direction of the arrow to take it off Take off the overflow filter Haier Rinsing Rinse with stored water Repeat the midway spinning and rinsing with stored water for 2 3 times 1 Put the laundries into the wash tub Select suitable current according to the laundries 2 Fill water to preset water level 3 Rinse Adjust the wash timer to 2 3 minutes to do rinsing When the laundries quantity is few please use Standard current If you use Strong current it may splash 1 Put the laundries into the spin tub evenly and smoothly 2 Press the gland in the tub properly Close the inner and outer cover of the spin tub 3 Spin Select suitable spin time according to the laundries and do spinning During spinning if there s abnormal sound it is generally owing to slanting placement of the laundries Please stop the machine and re order the laundries In spinni
12. xtracted by hand Be sure to pull the plug off when there s power failure or the machine is adopt electric leakage protector being moved cleaned or when it is idle If the supply cord is damaged it must be replaced by the manufacturer or its service agent ora similarly qualified person amp SA in order to avoid a hazard Do not put the machine at damp place like the bathroom Never wash it with water Do not place wet laundries on the control panel For washing machine with ventilation Do not wash water proof laundries like openings in the base that a carpet must not obstruct the openings Ventilation hole at the bottom of the washing machine the raincoat bike covers etc to avoid abnormal vibrations Do not let the machine share one receptacle with other electric appliances If the power plug is damaged or the plugging into the receptacle is loose do not use the plug any S more Haier maintenance After using please clean the lint and eyewinker of the lint filter and overflow filter in time Otherwise it may influence your using the machine Please first pull off the power plug from the receptacle before cleaning Cleaning the lint filter The lint filter must be used during washing t must be cleaned in time after each using 1 Take off the lint filter Put hand at the indicated position Push down to take it off See Figure 1 2 Clean the lint Put it in
Download Pdf Manuals
Related Search