E:\产品\2014\说明书\user manual for RFXel
Contents
1. and Protection bag Locate the system carefull SO I Equipment List Carefully check the following illustration showing that the RFXel System should include 1 Main Unit 2 Probes One RF Body Handle One RF Face Handle and 3 different size fractional RF handle 3 Input Power Cable 4 Fuse Connect Cable and Probes Carefully check the following illustration showing that the RFXel System should include 1 Connect the Input Power Cable into the electric wall socket 2 Connect the Probes to main Unit 3 Structure of RFXel Chapter 3 General Precautions and Cautions The following precautions cautions and warnings must be observed for the safe use of the system Precautions Operator should read this manual thoroughly before attempting to operate the system Probes must be kept clean at all times The system is heavy and may cause injury if proper care is not used when moving it The system is well balanced and Is designed to be moved but should always be moved carefully and slowly Never pull the system by the probes Cautions Only after Hermes authorization then may service the system This includes making internal adjustments to the power supply cooling system probes etc Maintenance performed by the operator must only take place when the system is shut down and disconnected from the electrical power source Performing maintenance procedures with the system powered up can be hazardous to the operator an2. RF Xel Fractional RF SYSTEM OPERATOR S MANUAL Serial Number RF Xel Hermes Technology Co Ltd www starbelle cn Copyright 2014 Hermes Technology Co Ltd No part of this manual may be reproduced or copied in any form by any means graphic electronic or mechanical including photocopying typing or information retrieval systems without written permission of Hermes Technology System specifications and the information contained in this document are subject to change without notice All rights reserved Hermes Technology Co Ltd its logo ESWT RSWT ShockWave Cryo Cavitation iBelle PEMF Dermolift RF Dermolipo RF Cyclone RF Pixel RF Lipo Electromagnetic CrioWave Oxygen Peel Acoustic Wave Cryolipo are the trademarks of Hermes Technology Ltd Hermes Technology Co Ltd Office Rm508A Chuangzhan Business Building Rongxi Street Baiyun Guangzhou China Tel 86 20 22847317 22847318 Fax 86 20 22847315 Email helios 188 com Factory Floor 1 4 No 38 Jiaoxin Village Shijing Town Baiyun District Guangzhou China Tel 86 20 61163310 BUREAU VERITAS Warning Before attempting to use or operate the system operator should read this manual and become thoroughly familiar with all its safety requirements and operating procedures Contents Chapter 1 2 2 nnn nnn nn nn nonce nese nonce ne ncns system Ov
3. d or destructive to the system Always turn off the system when it is not in use Never leave the system in Pause Mode and Start Mode unattended Never press the Start Softkey unless the probe is safely oriented at a specific and intended target The probes must always be visually inspected before treating the patient If any damage is apparent do not use the probes Never leave the system turned on open or unattended during system maintenance Burn Hazards This system is advanced system for aesthetic and cosmetic applications The system emits energy that can damage the skin in case of the use of excessive energy NOTE Please adjust the emitting energy step by step as per the communication with client Explosion and Fire Hazards The system is not suitable for use in the presence of flammable mixtures with air or oxygen Do not operate in the presence of volatile solvents such as alcohol gasoline or other solvents Do not use any flammable substances such as alcohol or acetone in the preparation of the skin for treatment If necessary use soap and water to clean skin before treatment If alcohol is used to clean and disinfect any probe allow it to dry thoroughly before operating the system Flammable materials must be kept at a safe distance from the system Applicator Installation 1 One Big Radio Frequency handle for body 3 Three Different Size Of Fractional RF Handle Chapter 4 Operating Instruct
4. erview Chapter 2 nnn nn nnn nn nnn nn nn nn nnn nnn nn nnn nn nn nnn nn nnnnns Installation Chapter 3 2 2 2222 2222 General Precautions and Cautions Chapter 4 Operating Instructions Chapter 5 n n nn nnn nn nn nnn nn nn nena nnn nonce ne ncns After Sale Service Chapter 6 Engineering Drawing Chapter 7 29 m2 monn nnn nnn nnn nn ne nnn nnn nnn nnn nn nnncns Technique Data Chapter 8 n n nnn nn nn nn nnn nn nn nnn nnn nn nn nnn ne nen nnnc nnn Appendix A Chapter 1 System Overview Face View Net Weight 4Kgs Chapter 2 Installation Before the System leaving factory the Hermes technology will do the best to protect the equipment during transportation Please refer to appendix A System transportation is carried out by third party not by Hermes technology Co Ltd NOTE Any damage to the packaging or to the system found prior to opening the package should be reported to Hermes Technology by photos and to the insurance carrier Unpack the system The system is delivered in a Honeycomb Box Cut the bandage and open the Box Cover while it is lying horizontally on the floor Take out the package box of probes and cables Pull the system out of Box Remove the Foam Brace Left and Right
5. invalid in case of Damage caused by accident abuse misuse or misapplication it will be repaired with repair fee Damage caused by service performed by anyone who is not technician or qualified by manufacturer A product or part that has been modified without any permission of manufacturer A Product that has no serial number Maintenance Hermes provides lifetime maintenance Only charge the cost price for replacing the component NOTE 1 After treatment keep the power on about 3 minutes to make inner board cooling 2 Please keep equipment in the shade avoiding direct lay of light 3 Don t drop the equipment amp keep it out of any shock 4 Clean probes after use 5 Moving the equipment be careful not to drop applicators 16 Chapter 6 Engineering Drawing The Engineering Drawing guides to check and repair the system When the system meets problem please take the photos and give the feedback to Hermes Technology by email Hermes will handle the problems as soon as possible Fuse Replacement To replace burnt fuses Turn off the system and disconnect the power cable from the outlet Unplug the power cable from the power cable connection port on the service panel Remove the fuse housing as shown in Figure 7 6 Remove the burnt fuses from the housing and replace them with the new ones Make sure that the fuses fit snugly within the fuse housing Insert the fuse housing into its receptacle and p
6. ions Operating the System Turn on the system and the screen is on RFXel REXel Fractional RF Face RF Body Touch applicator icon and enter into each treatment interface Fractional RF Handle Treatment Interface Fractional Ri Sno l 5 OO m 1 RF Active icon Touch and to select the active time from 100m s to 900m s Default mode is 100m s 2 RF Rest icon LAA p TOO Touch g Ed select the rest time from 100m s to 900m s Default mode is 100m s a 3 Radio Frequency Power icon Touch and to set the power from 0 to 100 every 5 a interval 4 Working Time icon Touch and from 1 to 20 minutes every 1 minutes a interval Defult mode is 20 minutes 5 Start icon the treatment 6 Pause icon O the treatment 7 Return to the previous ren D RF For Face Treatment Interface RFace Ron Son Snow rou 1 RF Active icon Touch and to select the active time from 100m s to 900m s Default mode is 100m s 2 RF Rest icon Ud ron Touch a Ei select the rest time from 100m s to 900m s Default mode is 100m s 3 Radio Frequency Power icon Touch and to set the power from 0 to 100 every 5 a interval d Touch and from 1 to 20 minutes every 1 minutes a interval Defult mode is 20 minutes 5 Start icon Q the treatment 4 Working Time icon 6 Pause icon O the treatment 7 Return to the previous ren D Big RF For Body Treat
7. ment Interface REF Body Sno Sho h LR on 1 RF Active icon Touch and to select the active time from 100m s to 900m s Default mode is 100m s 2 RF Rest icon LAA E Ton Touch g Ed select the rest time from 100m s to 900m s Default mode is 100m s 3 Radio Frequency Power icon Touch and to set the power from 0 to 100 every 5 a interval 4 Working Time icon ae Touch and i 1 to 20 minutes every 1 minutes a interval Defult mode is 20 minutes 5 Start icon the treatment 6 Pause icon O the treatment 7 Return to the previous MO Total Time Interface If need to clearance the total treated time for each treatment please touch icon La times and then touch UOUUL OU once so the total treatment time of cryo cavitation is clearance The operator of other functions are the same Warning Before press the START button apply gel over the area to be treated Slide the probe slowly Adjust the emitting energy step by step as per the communication with client For abdomen treatment must avoid the navel For cavitation treatment never treat the bone area 15 Chapter 5 After Sale Service Warranty Coverage Hermes warrants defects in materials and workmanship for a period of 1 year from the date of original purchase Hermes will repair these products at no charge or refurnish the parts if it has any abnormal condition Exclusions This warranty is void and
8. ush it in until it snaps into place Connect the power cable to the system and to the mains outlet Turn on the system and verify that it is functioning properly CON OF FP WD Caution Make sure that the type and rating of the new and the replaced fuses match Always replace both fuses at the same time 17 Chapter 7 Technique Data Dispaly 4 3 Color Touch Screen RF Frequency MOR S Max 50W Power Input 110V 120V 220V 240V 50 60Hz CE amp ROHS Chapter 8 Appendix A Please connect with your sales manager Sales manager Janet Wu Phone number 86 13642609287 Factory Floor 2 No 38 Songboliji EX Jiaoxin Village Baiyun District Guangzhou China Call phone 86 13560005213 Email helios 188 com Office Room508B Chuangzhan Business Building Rongxi Street Baiyun Guangzhou China Tel 86 20 22847318 Fax 86 20 22847317 18
Download Pdf Manuals
Related Search