FA270RF - Vector Security
Contents
1. F irst K14035UG 2 06 Rev A Alert FA270RF eo E SYSTEMS Keypad Transceiver USER GUIDE Keypad Features DISPLAY The FA270RF keypad features a 3 digit numeric display for zone identification and pre designated English language prompts for example ALARM AWAY STAY CHECK etc for indicating system status The numeric display backlights when any key including any function key located behind the flip open panel is pressed The backlighting is automatically timed out after ten seconds without a key press See Figure 1 FUNCTION KEYS The function keys including the Special Function Keys A B C and D or their local identifications are always backlit for ease of use Check the User s Guide that accompanies the control panel for detailed instructions on the use of these keys The function keys include keys for panic alarm activation The panic alarms are activated by pressing key pairs 1 amp 3 amp or amp How these panic keys function and the type of panic alarms they produce is determined by the control panel s capability and programming Check with your installer for the availability and type of alarm of these panic keys SOUNDER The sounder is a piezo electric device that pulses for fire alarms and sounds continuously for burglary and audible panic alarms KEYPAD LEDS The keypad contains two LEDs that indicate the status of the system as follows LED Function G2. reen Lights when the system is ready to arm no zone faults are present Red Lights when the system is armed SPECIAL FUNCTION KEYS These are four keys located to the left of the numeric keys see Figure 1 The keys may be programmed by your installer for panic alarms or other special functions such as macros a frequently used series of key entries Function keys must be held down for at least 2 seconds to activate an alarm Check with your installer for the programmed function of these keys Special Function Keys FA270RF 003 VO Figure 1 FA270RF Keypad Transceiver User Mode This mode gives you the capability of enabling and disabling individual wireless keys that have been directly programmed into the FA270RF This is particularly useful if a user loses a wireless key This mode may only be accessed if the FA270RF is powered up for at least 1 minute Only wireless keys programmed directly into the FA270RF may be enabled and disabled using this mode ENTER THE USER MODE Press the 1 and 3 keys simultaneously for a few seconds after the unit has been powered for at least 1 minute CHANGING THE STATUS OF A TRANSMITTER On the display dE and flashes alternately Enter the number of the wireless key transmitter 1 8 Then d and the wireless key number you entered flash alternately with 1 or 0 on the display A 1 indicates the wireless key is enabled a 0 indicates it is di
3. sabled Enter 1 to enable or 0 to disable the wireless key All wireless keys are defaulted to 1 enabled Press the to accept the entry Repeat the procedure for all the wireless keys whose status you want to change EXITING THE USER MODE To exit the User mode press when dE and flash alternately on the display First i Alert WW PROFESSIONAL SECURITY SYSTEMS 149 Eileen Way Syosset NY 11791 www firstalertprofessional com Copyright 2006 Honeywell International Inc K14035UG 2 06 Rev A
Download Pdf Manuals
Related Search