E-One Clinic user Manual
Contents
1. E amp DNE clinic User Manual Dear client You have just purchased an E One and thank you for your custom Habits change and E Onre is evidence of this You can now safely have access to a hair removal technology that uses professional quality pulsed light in the comfort of your home HAIR REMOVAL WITH THE have personally ensured that the utmost attention be paid to the implementation of each E gt One you will see that E gt One is an exceptional product CHANGING THE OPTIC CARTRIDGE hope that you will be completely satisfied with your E One RETURNING USED OPTIC CARTRIDGES and that you will share your experience on our company s SOFTWARE OPTIONS official website at www e swin com Yours Sincerely ves 7 eer S ottier Creator of G One E gt One PACKAGE CONTENTS A iiie i 7 m ai 1 Base One and applicator 1 clean Optical Spray 1 Optic with filter included 1 ston 1 Patches Se details on pages 12 13 See details on page 43 consumable cartridge and its optical filter Guide plate self adhesive patches included in the applicator of your E One See details on page 42 See details of page 43 i E N ECre i i Hair removal follow up a E One clinic oe CAUTION YOU MUST KEEP ALL THE ELEMENTS OF THE ORIGINAL PACKAGING BOXES PACKAGING ETC The manufacturers 2 year warranty will cover parts and labour only if the device is returned with all its elements in its original 12. 04 ag 05 Your device is blocked 08 06 and blinking of the temperature icon IS Temporary blocking 10 and blinking of the icon that detects the acti vation card I8 Loss of connection with the activation card e One clinic RC and Rc multi only 11 You have inserted the wrong activation code for the Ontic cartridge wrong code 12 You have inserted the wrong activation code for the Ontic cartridge code already used You have inserted the wrong PIN code when 13 you started the device the PIN code entered is not identical to the one previously recorded You have inserted the wrong PIN code the 2 consecutive PIN codes entered are not identical 14 What to do Contact our technical department Visit your customer page at www e swin com and click on Contact Us and After Sales Service Insert the new Optic cartridge by carefully following the handling and access instructions Optic cartridge code Unplug your device and plug it back follow instructions on page 29 If the problem persists contact our technical department by visiting your customer page at www e swin com and clicking on Contact Us and After Sales Service Wait for the procedure that cools down the optical parts of the applicator to finish Check that the activation card is present and running smoothly You just need to place it back on it see page 28 Follow the instructions on how to enter codes see pag
3. Hair removal follow up 1 User manual packaging 1 PCN pencil of work and sharpener 1 gel working gel 1 mask Safety Glasses See details on page 42 See details on page 42 See details on page 42 You must therefore carefully maintain the entire original packaging in which your gt _ ME was delivered to you REMINDER Only E Swin is authorised to sell E One and its accessories Optic Stop clean patches pen gel mask FUN etc on its own website www e swin com FOR YOUR SECURITY USAGE PRE CAUTIONS Before using your E gt One please read the following information carefully Voltage 100 240 V Nominal frequency 50 60 Hz Maximum power consumption 240 VA Make sure that the voltage corresponds to that of your installation Any improper connection may cause permanent damage not covered by warranty Make sure that the power outlet to which you are connecting your E ne is undamaged in perfect working condition and that it does not interfere with the proper use of your E gt One the power outlet must be easily accessible This device is intended for personal use at home only and not for professional purposes Do not unplug by pulling the cable of the E gt One Never use E gt One with wet hands E gt One must never be used in the shower bath or in any place where water can splash the device applicator or base Never immerse the base of Eng its applicator or the Otic cartridge in water Ne
4. My selections will be as follows woman the darkest skin 5 colour hair 2 thickness intensity level gauge level 1 HAIR REMOVAL WITH THE E amp One I SPECIAL CASE OF THE E gt One clinic Rc and rc multi DEVICE These devices operate with an activation card credited with 3000 flashes This card is specific to the Optic cartridge with which it has been ordered Use the activation card of your Ontic cartridge Insert the card on the upper support clip located in the base of the applicator Leave the card in this slot throughout the entire hair removal session Atthe end of the session remove the activation card take care not to damage it and store it in its case Follow the procedure to switch off the device HAIR REMOVAL WITH THE EOne ISTEP 4 PRECAUTIONS TO BE TAKEN DURING THE SESSION MARK OUT THE AREA TO BE FLASHED e You must wear your safety glasses MASK at all times If other people are around you while you are using Eng they should also wear the safety glasses MASK Important Do not flash the periocular area located under the e Mark out the area to be flashed with the help of the Del les pont aa i safety glasses Mask protecting your eyes eyebrows eyelashes PEAN by tracing parallel white lines on the large areas e If you are planning to flash a large area do not apply the gel over the entire area from the beginning as it will e If necessary use the guide plate Stop to c
5. case image 37 you must place each of your thumbs on the 2 clips and exert lateral pressure towards the outside of the case image 38 in order to break the clips You can now remove the new Optic cartridge from its case I STEP 2 KEEPING THE ELEMENTS AT THE TIME YOU RECEIVE YOUR NEW CARTRIDGE When you receive the new Optic cartridge you must keep the following items e the transparent plastic case and its lid e the 2 white foam paddings of the cartridge case e the 2 cardboard boxes The optic box The brown strengthened cardboard box You also have at your disposal e 2 sealing self adhesive labels stickers e the self adhesive Colissimo prepaid return voucher ISTEP 3 HOW TO PACK THE USED CARTRIDGE e Collect the used cartridge and place it inside the trans parent plastic case image 39 then close it with the help of its plastic cover image 4S e Stick each of the 2 sealing stickers on either side of the case so that each sticker covers the joint between the case and its cover image I e Take the 2 white foam paddings of the cartridge case and place them on either side of the plastic case by com pletely propping them between these 2 foam paddings e Place the case in the Optic box image 42 e Then place the Optic cardboard box inside the brown strengthened cardboard box image 3 ISTEP 4 PREPARING FOR DISPATCH e Close the brown box making sure to firmly scotch tape either side
6. previous menu However if the second code entered is different from the first code the warning icon 17 will blink and the error message no 14 will be displayed You must therefore press the validation icon I4 and redo the entire procedure enter the PIN code then re enter the same PIN code for confirmation Following this procedure each time you start up your device you will be asked to enter the PIN code The unlock icon SG blinks it is no longer crossed out by a red line You must enter the PIN code only once If the code is correct the safety icons will be displayed If the code is erroneous the warning icon 17 will blink and the error message no 13 will be displayed e Disabling the PIN code is possible only when the E gt ne is already running i e the PIN code you want to change has already been entered at start up You must then click once on the unlock icon I6 and enter the PIN code 1 only once e Modifying an existing PIN code while a former code already exists is possible but only when G gt Once is already running i e the PIN you want to change has already been entered at start up You must therefore click once on the lock icon iG and enter the current code once then validate it validation icon 14 The device is unlocked the oblique red line appears the lock icon IG It is then possible to enter a new PIN code by following the same steps as those described previously e If you have mistakenly selected
7. select each one of them 4 All the settings must have been pressed to be able to use E One If one of them has not been selected the icon will continue to blink IDENTIFY YOUR SILHOUETTE screen O Select man woman silhouette by clicking alternately on the frame 6 The selected silhouette stays on the screen the other silhouette disappears IDENTIFY THE THICKNESS OF THE HAIRS TO BE REMOVED screen Choose the thickness of the hair 7 among the 4 thic knesses of hair proposed from the thinnest bottom to the thickest top IDENTIFY THE COLOUR OF THE SKIN screen F Choose the colour of the skin 8 from the lightest bot tom to the darkest top Very dark skin and black skin are not represented here because they are not compatible with the gt No HAIR REMOVAL WITH THE E amp One ADJUST THE DESIRED INTENSITY LEVEL screen G The arrows located next to the intensity level icon 9 enable you to increase or to decrease the intensity of the issued flash Click on one of the two blue arrows until it gradually reaches the desired intensity level When the last setting has been validated the pause icon IS located in the browsing area becomes visible The icon representing the lamp 28 blinks the device is ready to flash At any time you can change any of these settings you just need click on the corresponding icon and modify the settings By default the proposed intensity l
8. 5 C for immediate use away from excessive moisture e g bathroom and in a place where it cannot be subjected to vibrations e g placed on a washing machine e If the device suffers from an impact it will be neces sary to check the optical parts in their entirety e Any visible damage to the optical parts filter flat red part made of glass optical guide tube etc must lead to an immediate cessation of use of the device MARKINGS IDEVICE FEATURES I USING THE DEVICE E One clinic Reference of the hair removal device E gt One Clinic Access SC RC and RC Multi Num ro de s rie o Unique serial number of your E gt One E SWIN 5 de la Noue road Year of manufacture of your device and address of the manufacturer 2013 78113 Adainville C Medical device satisfying the requirements of the European Directive 93 42 certified 0499 by an independent body IP 2X Device protected against solid foreign body of 12 5 mm in diameter or more IP rating L Functional earth terminal Al Logo corresponding to a degree of protection against electric shock for parts that are applied onto the patient Part to be applied Type BF Class II Medical device IUSING THE DEVICE Device must be used indoors Keep the device dry FR Keep away from light and heat O It is compulsory to refer to the instructions in the user manual a Operating conditions supply voltage alternating Current frequency of the mains 240 VA voltage
9. E the video is avai lable on your personal client page e Take the applicator and press simultaneously on the 2 locking tabs of the mobile head 23 and remove it e Once the mobile head is removed the Optic cartridge with filter presents itself in the applicator 24 e Remove the cartridge from the applicator strongly pinch the filter support 25 and pull 26 The optic cartridge with filter now appears 27 it is imperative to only hold the plastic parts The filter must never be separated from its Op cartridge The explanation of the different parts of the applicator can be found on page 13 ISTEP 5 INSERTING A NEW CARTRIDGE video available on your personal client page e Take the new OPlic cartridge and check the direction for inserting this new cartridge e Align the Ontic cartridge with the applicator with the help of the red dots 28 Note The cartridges are not symmetrical so they must be inserted in a specific way and certainly not any other way To help find your way a red dot indicates the part underneath the cartridge This dot must be oriented to match the side of the applicator that contains a venti lation grid which is also marked by a red dot You must therefore align the 2 red dots e Push it into the slide way of the applicator by pressing on both sides 29 so as to ensure that it is properly maintained 30 e Re attach the mobile part of the applicator by pressing simultaneou
10. Ore OPTIC The number 2 appears screen L With the help of the CARTRIDGE OUTSIDE THE NORMAL PROCEDURE navigation icons 12 in the same way as above enter the second 5 digits code and validate icon 14 You may need to have to change the cartridge before the expiration of the number of flashes initially planned when for example a tube has been broken or is not working anymore For any change of optical cartridge outside the normal procedure please strictly refer to the instructions given by our technical department Switch the unit off and switch it back on Only our technical department ul 1 t rou to chang normal procedure Any c at t inserting instructed by our technical team your OPtic cartridge you will then need gt amp A WARNING It is strictly prohibited to make any modification of any kind to your gt 36 RETURNING THE USED OPTIC CARTRIDGE FRANCE ONLY To preserve the environment we recommend that you use the packaging of the Optic cartridge to send us back the used cartridge I STEP 1 RECEIVING THE NEW CARTRIDGE AND UNPACKING When unpacking the new ON iC cartridge you must keep all the elements that will allow you to send us back your used cartridge safely and for free refer to step 2 for more details To remove the new Optic cartridge from its plastic case you must first break the breakable clips that hold the cartridge in its case To do this once you open the plastic
11. ach the mobile head by pressing delicately as indicated on image to the right 36 CHANGING THE OPTIC CARTRIDGE I STEP 8 If the codes are correct the current menu will be dis played again as well as the number of flash credit SPECIAL CASE OF THE One clinic rc and rc multi If the codes are wrong an error message will be dis played error message no 11 or 12 depending on the scenario please refer to page 52 for their meanings and the warning icon 17 will blink In each case you must proceed to entering the full code You must click on the validation icon 14 to proceed again to entering the 2 successive codes completely There is no need to enter any code when you change the Optic cartridge e When the number of flashes expires You must order an OptiC cartridge delivered with its activation card You must send send us back your used cartridge and your old activation card this is free of charge thanks to return voucher available in the package containing your new Optic cartridge and its activation card The warranty does not cover improper handling We therefore recommend you to be very attentive to the procedure to follow SPECIAL CASE OF THE One Clinic access and sc In this case it is compulsory to enter new activation codes every time you change the Optic cartridge e Plug in your device The screen is black The cartridge codes will be provided with the shipment of your order They will be accessibl
12. an cloth that has been dampened with Clean never spray CLEAN direct MAINTE NANCE I APPLICATOR e Mobile Head Cleaning the optical parts internal and external of the mobile head with the spray Clean before and after each use maintains your E gt One s effectiveness Never spray Clean directly on its Optic cartridge or its filter ly on the touch screen e Power cord Check its perfect condition must not be pinched or crushed no bare wires Clean with a cloth that has been dampened with water without any additives e Body of the applicator All plastic parts of the applicator must be cleaned with clean cloth that has been dampened with water with out any additives Be careful not to drop liquid into the ventilation grid located on the lower casing IBASE CABLE TO APPLICATOR This cable must always stay clean without any visible impairment You must never bend it strongly or get it stuck If in doubt about the cables condition you must stop using your One immediately ITHE AIR VENTS OF THE BASE AND THE APPLICATOR The applicator and the base are ventilated The grids are found on both the applicator and the base on its lower and upper back part You must check that all of these grids are clean and that there are no elements likely to clog them I STORAGE e Store your E gt One and its accessories in its box e Place your gt Cme in a room where the room tem perature does not exceed 2
13. ashed It must under no circumstance enter inside the mobile head ISSUING A FLASH To be able to flash the glass tip of the applicator opti cal guide must be applied onto the skin Then pressure should be exerted so as to push down the head of the applicator creating a pressure on the skin The flash can then be triggered by pressing the button located on the side of the applicator The pressure must be released and the applicator must be moved away from the skin The applicator is then moved onto the next area just beside the one that has just been flashed It can only be triggered again after the indicator light has turned green if the applicator is triggered again before the indicator light has turned green you will not be able to issue the flash Make sure that you stretch the skin where it is the thin nest so that the glass tip optical guide of the applicator is in contact with the skin and that you have properly removed all hairs from the area to be flashed Note For each flash the treated area corresponds to the range covered by the tip of the optical guide i e 3 x 2 6 cm The glass surface optical guide at the tip of the applicator must be placed well flat on the skin HAIR REMOVAL WITH THE One ISTEP 5 ENDING THE SESSION e Press key e Once the fan located inside the applicator is off after 10 minutes or so the power cord can be unplugged The other
14. be done preferably on damp skin in order to reduce the aggres sive effect of the razor e Rinse your skin with water After shaving the skin should be thoroughly rinsed to remove all the hairs that have been cut I STEP 3 STARTING AND SETTING UP YOUR EOne Reminders The definitions of the icons are indicated on pages 14 and 15 Your E One is already equipped with an Optic car tridge Therefore you do not need to enter any activation code to run your device e Connect the En to its power cord E One issues 3 beep sounds the screen is black screen a Just press anywhere on the screen to enable all icons to appear screen 2 These icons are explained on pages 14 and 15 The menus are displayed temporarily Only the safety icons keep blinking e Unlock the safety features screen C It is mandatory to validate each safety feature by pres sing one by one on each safety icon the order of valida tion does not matter Once all the safety icons are validated all the other set tings icons for the flash will be available If an icon has not been validated it will continue to blink You will not be able to set up or use your ENC so long as all the safety features have not been confirmed and pressed TTTT SON Eli Bla EF e Setting up your hair removal session Simply give some information to each blinking icon to set up your hair removal session You do not need to press on the validation icon to
15. down If you intervene after using the E gt One you must wait for the fan of the applicator to come to a complete stop before unplug ging the base This enables among other things the optical parts to cool down properly e The device s touchscreen Never spray v directly on the touchscreen Take a dry cotton cloth and spray on the cloth and then wipe the screen with this dampened cloth Finish cleaning with a dry part of the cloth Made in France clean WUW E SWIN COM These self adhesive patches are used to cover the small areas that must not be flashed e g moles They must be placed after shaving and before applying the gel It is then possible to flash any area without having to worry about moles The patches will be removed at the end of the session Made in France natches These stencils are used to mark off the areas that must not be flashed in order to keep hair in fun shapes in certain areas They must be placed after shaving completely and after applying the gel The presence of the gel maintains these stencils in place It is possible to flash in the middle between the edge of the stencil and the skin so as to have a clear delineation of the contours of the desired form FUN option Made in France IBASE e Plastic parts All plastic parts of the E One must be cleaned with a clean cloth dampened with water without any additives e Touchscreen The screen must be cleaned with a cle
16. e from your personal client space To do this go to www e swin com enter your username and password and validate them You then e Touch anywhere on the screen gain access to your home page Click on the Optic cartridge activation codes If you are changing the cartridge When changing the Optic cartridge once the new cartridge is inserted you must press on the icon representing the for the first time you must first validate the conditions of acquisition of the codes by clicking on I have read and lamp 20 Figures 1 and 2 21 correspond to the 2 successive activation codes that need to be entered to activate considered the above information You will then be able to click on the serial number which corresponds to that the new can das of the new cartridge A message will pop up it provides the activation code 1 and activation code 2 it confirms that a copy of these codes have been sent to you via email for safekeeping and that you can also find this email in the My Messages section in your customer account These activation codes are unique they reflect the serial The number 1 appears screen K With the help of de P number of your machine and will not work on another Eno the navigation icons 12 enter the first 5 digits code provided This enables you to change the digit in each box and to move from one section to another Once the entire code is entered you must validate with the icon 14 I CHANGING THE
17. erative to use a sunscreen of very high protection on the treated areas for 2 weeks following the session Self tanning products Do not use E gt One if you have applied a self tanning product on the area to be treated wait until the effects of the self tanning product have disappeared completely before using E gt One You must only use the pencil of work DEN the gel Gel the self adhesive patches patches the guide plate StOP and the safety glasses Mask provided with your E nce The use of any other products may cause skin burns GLOS SARY I THE BASE I THE APPLICATOR Tip of optical guide Colour touch screen Applicator support cable applicator support area mobile head mobile head locking tab start button Flash availability LED upper casing UNE On off of the device pm UNM Browsing area On off switch Areas of safety icons Take care not to splash the device with water use near water or immerse in water Projection of water on any part of the device is strictly prohibited gt QOne must not be used in certain physiological or medicated contexts pregnant women photosensitive drugs Reading this instruction manual before using E gt Une is mandatory Wearing the safety glasses is mandatory How to programme a hair removal session Silhouette of man woman This area allows you to choose be
18. es 40 amp 41 Follow the instructions on how to enter codes see pages 40 amp 41 Contact our technical department Visit your customer page at www e swin com and click on Contact Us and After Sales Service Follow the instructions on how to enter codes see pages 40 amp 41 STANDARDS CERTIFICATIONS E SWIN SAS the company that is the exclusive manu facturer of the device gt One has been awarded an ISO 9001 and ISO 13485 certification COMPLIANCE E Swin declares that the E One complies with the essential requirements of Directive 93 42 EEC Annex Il Article 3 and has the CE mark under the responsibility of the SNCH This device therefore complies with the requirements and standards EN 60601 1 EN 60601 1 2 EN 60601 1 8 The CE certification is available at www e swin com PRECAUTIONS FOR USE Never let either the base or the applicator come into contact with water Never open the base or the applica tor as you could be exposed to high voltage Never use Optic cartridges and accessories other than those desi gnated and sold for E One and by E SWIN SAS I ENVIRONMENTAL PROTECTION Please comply with local regulations when disposing of packaging and consumables Wherever possible try to promote recycling SHOWROOM WARRANTY CONDITIONS PARIS FRANCE Your product is guaranteed for personal home use for a period of two years Any connection error handling error any use other tha
19. evel is adjusted to the minimum This level enables most users to obtain good quality results with optimum safety in 100 of cases Increasing the intensity level of the E Je will have the following consequences an increase in the results obtained a reduction of the number of sessions needed to obtain lasting result an increased sensation on the skin when the flash is issued an increased risk of rashes and even burns on highly pigmented skin olive after a session Always start with a test using the basic setting the default adjustment proposed by joe then gradually move the intensity up 1 notch until you reach the desired intensity Issue a flash then wait 5 minutes after this flash to appreciate the skin reaction In the absence of skin reaction you can continue to flash the entire desired area or move the intensity up again by 1 notch and observe the reaction once again and so on Important The darker the skin it is to stay close to the minimt I CASE STUDIES I m a man have white skin wish to remove the hair from my armpits My selections will be as follows man fair skin 1 colour the thickest hair 4 thickness intensity level gauge level 1 If flashing is on the beard the feeling can be significant We recommend that you place the gel in the fridge for 3 hours before flashing this area l am a woman have dark skin wish to remove the hair on my arms
20. f accessories then mobile head applicator e Verification and maintenance of the internal optical parts In all cases the device must be unplugged before you start disassembling the mobile head Before each use and before plugging in the E One you must check the integrity of the internal optical parts tube filter flat red piece of glass and optical guide The filter must be cleaned systematically before each hair removal session with the E One It must be clean and free of dust To proceed to the verification code gt Press simultaneously on the 2 locking tabs of the mobile head and remove it 1 gt Delicately place the mobile head on a flat surface gt gt the internal optical parts to cool down The o stop once the device is unplugged A mly on the filter support 3 and pull 4 The Optic cartridge with filter now presents itself to you 5 it is imperative to hold it only by the plastic parts e Cleaning of the internal optical parts Once the filter cartridge is removed the transparent optical glass is also accessible 6 Using the spray clean spray it on a lint free cloth beforehand 7 Note Never spray directly on the optical parts gt Afterwards clean only the accessible side of the filter with this cloth 8 Repeat the same procedure for the accessible part of optical glass 9 Note The filter must never be separated from its Optic cartridge gt W
21. fans located inside the base of the gt Onke will only stop once the device is unplugged e Clean the glass tip of the applicator optical guide with a damp cloth e Finish cleaning the optical guide with the spray Clean images 2S and 21 Once you have completed your treatment with the E One Clinic you must wait for the fans located inside the applicator to turn off completely This ena bles among other things the optical parts to cool down properly The fans located in the base for their part only stop when the device is unplugged e Store your E gt One Notes After the hair removal session small red spots may appear this is a normal reaction and will disappear quickly In case of sensitive skin and after a hair removal ses sion with the amp 0 do not use any hair removing cream for a whole week on the areas that have been flashed Once the hair removal programme has started the device charges itself vertical bars scroll at the bottom of the touch screen from right to left where icon 22 is located It also charges after each flash and precedes the display of the number of remaining flashes on the Optic cartridge If the device is idle for 15 minutes it will automatically go into pause mode Note if the device remains idle for 10 minutes or so it will automatical mode The fans located inside the applicator will stop running unlike t these will only stop once the device has been u
22. hen cleaning is complete take the optic cartridge and align it with the applicator with the help of the red dots IS Push it into the slide way of the applicator by pressing on it II so as to ensure that it is properly in position I2 gt Re attach the mobile part of the applicator by pres sing simultaneously on the locking tabs of the mobile head 13 making sure to align the internal red dot of the head with the red dot of the applicator I STEP 1 CHOOSING THE BEST TIME TO USE THE eEOne If your previous hair removal method was Razor You can use the amp One immediately Depilatory creams You should only use the E gt One 1 week after your last depilatory cream treatment Waxing electric epilator tweezers You should only use the E gt One 3 weeks after your last depilation treatment Laser technology flash lamp or other method You should only use E gt One after hair re growth has started HAIR REMOVAL WITH THE E amp One ISTEP 2 PREPARE YOUR SKIN e Your skin should be clean dry and free of any cosmetic product e Do not apply any cream moisturiser oil or any other substance on your skin e Shave the area to be flashed on the same day of the session with EOnNe It is imperative that the areas of the skin to be flashed are completely free of all hair by shaving and not by waxing depilation cream electric epilator or by any other hair removal procedure Shaving must
23. ile part of the applicator with the help of a slightly damp cloth followed by the spray Clean Active Ingredients Methylisothiazolinone and Methylchloroisothiazolinone MCI MI Their quantity in regards to the 3 1 ratio is 0 0008 Does not any contain formic aldehyde Keep away from light External use only Do not use on injured burnt or infected skin gel Made in Europe USING THE ACCESSORIES They must be worn by all those present at the time of the flash They enable you to mark out the areas that must never be flashed example eyelashes eyebrows Made in China mask This plate is made from a material that is resistant to flashes It enables you to cover an area on which the flash must not be used e g tattoo The glass tip of the applicator optical guide can also be placed in the middle between the ston and the skin Made in France You can find all these products on our website It is used to clean and maintain e the optical parts of the mobile head of the applicator external optical parts spray directly and wipe with a dry cotton cloth internal optical parts never spray directly on the internal optical parts Take a dry cotton cloth and spray on the cloth and then clean the filter flat red part made of glass with this dampened cloth Finish cleaning with a dry part of the cloth The spray must only be used once the device is unplugged and the optical parts have cooled
24. me of the flash e Never use near an aerosol a heat source or any other electronic devices e Do not stack on top of other electrical devices e Your E gt One is provided with a power cord 2 meters long and an applicator cable 2 meters long Do not use any extension cables or any cable other than those provided by E Swin SAS as this could render the equipment non compliant from an electromagnetic point of view e The wireless communication equipment must be kept away about 3 meters because they may interfere with the proper functioning of the device e The device must be installed in an environment unpolluted by electromagnetic disturbance computer electrical appliances USAGE PRE CAUTIONS DO NOT USE E One e If you are pregnant or have diabetes e To treat white grey or red hair Specifically certain people are born as red phototype red hair type As adults these people may experience a reduction of this essentially orange colour However the melanin structure of this hair retains characteristics that render light technologies ineffective for hair removal e On very dark skin or black skin please refer to our website www e swin com Clinic section e On an injured burned or infected skin e On skin that has been sunburnt and whose recovery time is less than one month e On skin lesions of unusual aspect you must first have a medical consultation with your doctor e On high risk areas blemishes bir
25. n for hair removal treatment and in a general way any other use outside the conditions described in this manual will void the warranty E SWIN SAS will not be held responsible for any accident that may occur due to improper use or non compliance with the prescriptions of the present manual or the various information provided through the labelling or the touchscreen of the E gt One The manufacturer s two year warranty will cover parts and labour only if the device is returned with all its ele ments in its original packaging You must keep the whole original packaging in which your E ne has been delivered to you E gt One devices and their accessories are also available in our showroom Address version 1 1 03 01 2014 34 Brunel Road PLAZ 1312 042_00 5017 Paris For all after sales and spare parts questions 33 1 45 74 22 22 please visit our website www e swin com EGeS win 5 de la Noue road 78 113 Adainville FRANCE WWW e swin com 0499 NO 3
26. ning of the device If it blinks please refer to the corresponding error message page 52 Cartridge tube When it blinks it means that you can issue a flash Clicking on this icon enables you to enter the 2 successive activation codes of a new cartridge this does not concern the amp NE Numbers 1 and 2 correspond to the 2 successive acti vations codes that need to be entered when changing the cartridge this does not concern the gt One All these characters enables you to enter the cartridge activation codes the secure PIN code of E Onoe and also to display the remaining number of flashes at any moment REMOVING HAIR WITH THE IBEFORE EACH USE EON VERIFICATION e Removing the Optic cartridge with filter video avai e Check the power cord must not be pinched or crushed wire must not be bare lable on your personal customer page e Check the cable connecting the base to the applicator no visible impairment ne une maple eae ER moVel ime optic er tridge with filter is then visible in the applicator 2 e Check the external optical parts of E gt OnNe gt Remove the cartridge from the applicator press fir gt Check that the glass tip of the applicator optical guide is intact and if this is not the case if the optical guide is cracked or chipped changing the whole mobile head is essential Ordering this part is possible at www e swin com go to Customer Centre New Order o
27. nplugged For the fans need to issue a flash CHANGING THE This step must be performed with utmost caution Any improper handling can result in permanent dam age to the applicator and to the gt ne in a more general way The warranty does not cover improper handling We therefore recommend you to be very attentive to the procedure to follow Apart from the classic procedure only our technical department is authorised to ask you to change the 0 cartridge refer to page 40 of this instruction manual I STEP 1 The cartridge must be changed when the number of flashes displayed is equal to 0 When this happens the lamp icon 28 appears but does not blink screen J You can monitor your usage on the touch screen at any time The ODtIC cartridge should not be changed before the E ONGC asks you to do so You will no longer be able to reuse a cartridge that has been changed earlier than needed ISTEP 2 e Before turning off and unplugging your device you must wait for the fan located inside the applicator to stop operating completely this may take several minutes This procedure enables the optical parts of the applicator to cool down the other fans located inside the base of the E gt One Clinic will only stop once the device is unplug ged OPTIC CARTRIDGE ISTEP 3 e Turn off the device e Unplug the power cord from the device ISTEP 4 EXTRACTING THE CARTRIDG
28. of the flaps image 4 e Stick the self adhesive Colissimo prepaid return voucher on the brown cardboard box image 45 Your package is ready to be dispatched You just need to drop it off at any post office SOFTWARE OPTIONS ISOFTWARE OPTIONS e PIN code It is possible to secure your E One by entering a PIN code As long as a specific PIN code has not been entered a red bar will appear on the lock icon IG This means that the device is not locked there is no code to enter By default the PIN code is OOOO If you do not act on the PIN code you will not be asked for one each time you turn on the device If on the other hand you change the default PIN code 0000 you will need to enter the new PIN code each time you restart the Once To change the PIN code you must Click the on lock icon 15 The number 1 located next to the lamp icon 28 will blink you must therefore enter the 1 code Enter the PIN code 4 digits with the help of the browsing icons 12 They enable you to change the digit of each segment vertical arrows and to move from one segment to another horizontal arrows Once the 4 digits of the code are entered validate them by clicking on icon I4 The number 2 located next to icon 298 will blink you must enter the second code Enter your code a second time confirmation entry and revalidate validation icon 14 When the input is completed you will automatically go back to the
29. over a rather e i dry out and lose its effectiveness in terms of optical transmission Therefore apply the gel as you progress onto the large area that should not be flashed tattoos ie area concerned Once the gel has been used on the skin and has been flashed it should under no circumstance be collected and reused on another area flashing the gel is likely to cause a change in its optical characteristics e Cover small areas that should not be flashed moles with the patches pi e To easily remove the applicator from its base you must grasp it next to the large white cable The applicator is then easily unhooked e After applying a thick layer of GEL over the entire area to be flashed move the applicator along the marked out area refer to the next page to know how to issue a flash e The applicator s positioning leaves a foot print on the skin which enables you to see the area that has just been treated Thus from one flash to another it is very easy to distinguish between an area that has already been flashed and another area that has not yet been An overlap of about 1 mm is possible Reminder The pencil of work PEN the gel Gel self adhesive patches Patches the guide plate stop the safety glasses Mask to be used must be those supplied with your The use of any other product may cause skin burns and void the warranty of your device e Apply a thick layer of GEL over the entire area to be fl
30. power Warning dangerous voltage device Recycling and treatment Instructions for treatment of used products the WEEE Waste of Electrical and Electronic Equipment Directive 2020 96 CE has been implemented to ensure that the products are recycled by using the best available techniques for treatment recovery and recy cling and thus to contribute to the protection of the environment and human health Your product has been designed and manufactured with components and high quality materials that can be recycled and reused E Swin SAS is affiliated to an eco organisation that is responsible for collecting and processing of end of life products Do not dispose of your old product in your ordinary trash bag for domestic waste Please keep informed about local structures in place for the selective collection of electrical and electronic appliances marked by this symbol Please choose one of the following treatment options Drop off the entire product including its cables and accessories at the designated WEEE collection points provided for his purpose If you purchase a new replacement product please send back your old product to E SWIN SAS in its original dispatch packaging ERROR MESSAGES In addition to its own number see table below each error message is notified by the blinking of the warning icon 17 Screen Display Meaning 01 No flash detected 02 The device does not detect the Optic cartridge 03
31. sly on the locking tabs of the mobile head 3 making sure to align the internal red dot on the head with the red dot on the applicator e After attaching the cartridge you must make sure that it is positioned correctly it must be aligned to the fix part of the applicator 32 If this is not the case if it overtakes by more than 2 mm it means that the cartridge was inserted incor rectly you must take it out and check that CHANGING THE OPTIC CARTRIDGE The red dots are aligned 28 You have not twisted the electrodes 33 If you have twisted the electrodes do not insert your Otc cartridge in your ne as it may cause serious damage to your device You will need to send us back the damaged cartridge and order another one Precautions During the entire procedure of changing the cartridge you must under no circumstance touch the electrodes of the tube 34 If you accidentally touch the tube or its reflector we urge you to send us back your cartridge to proceed to an exchange ISTEP 6 e Before repositioning the mobile head of the applicator you must always clean the filter located directly on the Optic cartridge with the spray Clean but use it only on its accessible surface It is strictly forbidden to spray CLEAN directly on the filter It must be sprayed beforehand on a clean dry cloth and it is this cloth which must be used to clean the accessible surface of the filter ISTEP 7 e Re att
32. the lock icon 15 and that you do not wish to enter a personalised PIN code click on the go back icon 13 e Beep keys By default the Beep keys are activated but it is possible to disable it This is why we recommend that you choose a simple PIN code that you can remember but you will also need to write it down somewhere else PROHIBITED HANDLING I HERE IN A non exhaustive LIST OF SOME ACTIONS THAT ARE PROHIBITED WHEN USING YOUR One These actions are prohibited because they endanger you or may damage your device in an irreversible way It is used to mark out the area to be treated The pencil work must be completed before applying the gel Important Note Only this pencil can be used to mark out the areas to flash It has been tested not to react to A the flashes Other pencils may lead to skin burns if the flash is used on the line drawn on the skin on Made in China It should be stored at room temperature It is used in thick layer and is applied gradually as the session progresses so that it does not dry on the skin Once used on the skin and flashed the gel should under no circumstance be collected and reused on anoth er area A gel that has been flashed is likely to lead to an alter ation of its optical characteristics At the end of the session it must be removed from the surface of the gt skin with a wet towel or by taking a shower It should be from the optical parts and from the mob
33. thmarks warts unhealed wounds e On moles if they are located on the zone to be treated they must first be protected specifically by covering them with the self adhesive Matches provided with your E gt One e On tattooed areas permanent makeup e g lip tattoos or cosmetic tattoos whatever their colour If this is the case use the delimitation plate StOp that came with your E gt One e If you have a skin condition eczema inflammation acne KEEP OUT OF REACH OF CHILDREN e Any use of E gt One by an under aged person must be performed under the Supervision of an adult e Always store away the E gt no after each use out of reach of children Unplug the power cord in its original bag and wind back the applicator cable around the applicator support cables provided for this purpose e If you are taking medication that can lead to photosensitivity please ask your doctor before use e If there is a history of skin diseases you will need to obtain medical advice before using the E gt One e Do not use on animals Cautions regarding UV Artificial UV in a beauty parlour you should take care about when using E One and also using artificial UV radiation Regarding high pressure UV dispensed by high powered machines it is advisable to wait a few days before or after such a session before starting treatment with E gt One Natural UV when exposed to sunlight after a treatment session with the E gt One it is imp
34. tween woman and man Thickness of the hair This area allows you to select the thickness of the hair from the thinnest bottom to the thickest top Skin colour This area allows you to select the colour of the skin from the lightest bottom to the darkest top Level of intensity The gauge represents the 6 levels of intensity of the issued flash The arrows adjacent to this gauge enable you to increase or decrease the level of intensity Pause This icon is displayed on the touch screen throughout the duration of the hair removal session Pressing on it allows you to put the device in pause mode Play Enables you to cancel the pause mode and to resume the hair removal session These buttons enables you to move from one character to another 22 and to increase or decrease the digits of each character Go back to the previous menu This icon enables you to modify any selection made previously It is available only when icons IG and have been selected Validation of input data 22 Information in real time Volume activation deactivation Lock unlock This icon enables you to secure your gt Cne with a PIN code Warning A number is displayed on the touch screen when this icon is active it corresponds to an error message see page 52 Detection of the activation card this icon is only visi ble in case of One Temperature of the applicator This icon is not active during normal functio
35. ver use E gt One if damaged never use in case of a functional anomaly appearing on the touch screen or following a fall non visible damage can be detrimental to your safety This device can be repaired only with special tools For any problems after delivery please contact us on our website www e swin com through your personal page Optic cartridges and more generally all accessories must be ordered only via our website www e swin com in the Customer section New Order of accessories We disclaim any responsibility for the use of consumable cartridges and accessories from another manufacturer e When using the device make sure to place it on a flat surface in a place where the potential of a fall can be avoided e E Swin SAS disclaims any responsibility for any damage resulting from improper use of the device or use other than described in this manual e One pair of safety glasses Mask is provided with the device these glasses must be worn at all times when using the device If other people are around you when using the E gt ng they should also wear the glasses Mask e When the E gt ne is being used it must not come into contact with hair the periocular region delimited by the safety glasses MASK for example eyebrows and eyelashes must never be flashed with E gt One clothes or any other object so as to prevent all risk of injury blockage or impairment e The applicator tip must not touch the Mask at the ti
Download Pdf Manuals
Related Search