Mega TRIPAR Profile Plus User Manual
Contents
1. 2 15 User Instructions 2015 ADJ Products LLC all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ADJ Products LLC logo and identifying product names and numbers herein are trademarks of ADJ Products LLC Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ADJ Products LLC brands and product names are trademarks or registered trademarks of their respective companies ADJ Products LLC and all affiliated companies hereby dis claim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indi rect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe unsufficient and negligent assembly installation rigging and operation of this product Europe Energy Saving Notice Energy Saving Matters EUP 2009 125 EC Saving electric energy is a key to help protecting the enviroment Please turn off all electrical products when they are not in use To avoid power consumption in idle mode disconnect all electrical equipment from po2. XX represents either on or OFF 2 Press the SET UP button until Stnd is displayed 3 Press the UP or DOWN buttons to reverse the display 180 Operating Modes The Mega TRIPAR Profile Plus has five operating modes Sound Active mode The unit will react to sound chasing through the built in programs There are 16 sound active modes Color Macro Mode There are 64 colors to choose from e Auto Mode There are 3 Auto Modes to choose from RGB UV Dimmer Mode Choose one of the four colors to remain static or adjust the intensity of each color to make your desired color e DMX control mode This function will allow you to control each individual fixtures traits with a standard DMX 512 controller RGB UV Dimmer Mode 1 Plug the fixture in and press the MODE button until 2 When r XXX is displayed you are in Red dimming mode Press the UP and DOWN buttons to adjust intensity Press SET UP to ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 7 Mega TRIPAR Profile Plus Operating Instructions access green dimming 3 When G XXX is displayed you are in Green dimming mode Press the UP and DOWN buttons to adjust intensity 4 When b XXX is displayed you are in Blue dimming mode Press the UP and DOWN buttons to adjust intensity 5 When u XXX is displayed you are in UV dimming mode Press the UP and DOWN buttons to adjust intensity 6 After you have adju
3. or other appliances inclu ding amplifiers that produce heat The fixture should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or water D The appliance does not appear to operate normally or exhibits a marked change in performance ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 4 Mega TRIPAR Profile Plus DMX Set Up Power Supply The ADJ Mega TRIPAR Profile Plus contains a auto matic voltage switch which will auto sense the voltage when it is plugged into the power source With this switch there is no need to worry about the correct power voltage this unit can be plugged in anywhere DMX 512 DMX is short for Digital Multiplex This is a universal pro tocol used as a form of communication between intelligent fixtures and controllers A DMX controller sends DMX data instructions from the controller to the fixture DMX data is sent as serial data that trav els from fixture to fixture via the DATA IN and DATA OUT XLR ter minals located on all DMX fixtures most controllers only have a DATA OUT terminal DMX Linking DMX is a language allowing all makes and models of different manufactures to be linked together and operate from a single controller as long as all fixtures and the controller are DMX compli ant To ensure prop
4. CHANGE 8 COLOR CHANGE 9 COLOR CHANGE 10 COLOR CHANGE 11 COLOR CHANGE 12 COLOR CHANGE 13 COLOR CHANGE 14 COLOR CHANGE 15 COLOR CHANGE 16 COLOR FADE PROGRAMS COLOR FADE 1 COLOR FADE 2 COLOR FADE 3 COLOR FADE 4 COLOR FADE 5 COLOR FADE 6 COLOR FADE 7 COLOR FADE 8 COLOR FADE 9 COLOR FADE 10 COLOR FADE 11 COLOR FADE 12 COLOR FADE 13 COLOR FADE 14 COLOR FADE 15 COLOR FADE 16 ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 19 Mega TRIPAR Profile Plus CHannel Value 9 Channel Mode Function COLOR MACROS PROGRAMS SOUND ACTIVITY SOUND ACTIVE PROGRAMS SOUND ACTIVE MODE 1 SOUND ACTIVE MODE 2 SOUND ACTIVE MODE 3 SOUND ACTIVE MODE 4 SOUND ACTIVE MODE 5 SOUND ACTIVE MODE 6 SOUND ACTIVE MODE 7 SOUND ACTIVE MODE 8 SOUND ACTIVE MODE 9 SOUND ACTIVE MODE 10 SOUND ACTIVE MODE 11 SOUND ACTIVE MODE 12 SOUND ACTIVE MODE 13 SOUND ACTIVE MODE 14 SOUND ACTIVE MODE 15 SOUND ACTIVE MODE 16 PROGRAM SPEED SOUND SENSITIVE 0 255 SLOW FAST 0 255 LEAST SENSITIVE MOST SENSITIVE When Channel 7 is between the values of 0 51 Channels 1 4 are used and Channel 5 will control strobing When Channel 7 is between the values of 52 102 Channel 8 is in Color Macros Mode and Channel 5 will control strobing When Channel 7 is between the values of 103 153 Channel 8 is in Color Change Mode and Channel 9 will control the color change speed When Channel 7 is between the values of 154 204 Chann
5. after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the ADJ Products LLC factory unless prior written authorization was issued to purchaser by ADJ Products LLC if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintnance cleaning or periodic check up During the period specified above ADJ Products LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of ADJ Products LLC under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of ADJ Products LLC All products covered by this warranty were manufactured after August 15 2012 and bear indentifying marks to that effect E ADJ Products LLC reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by ADJ Products LLC in connection with this product including
6. up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www adj com for any comments or sugges tions Service Hours are Monday through Friday 8 00 a m to 4 30 p m Pacific Standard Time Voice 323 582 3322 Fax 323 582 3108 E mail support AmericanDJ com Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures war ranty In the unlikely event your unit may require service please contact ADJ Products LLC PLEASE recycle the shipping carton when ever possible ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 2 Mega TRIPAR Profile Plus Features Five Operating Modes Electronic Dimming 0 100 5 Selectable Dimming Curves e 64 Color Macros e Built in Microphone e DMX 512 protocol 3 Pin DMX Connection e 5 DMX Modes 4 Channel Mode 5 Channel Mode 6 Channel Mode 9 Channel Mode amp 10 Channel Mode e ADJ LED RC2 compatiable Not Included Power Cord Daisy Chain See page 26 Mega TRIPAR Profile Plus Warranty Registration The Mega TRIPAR Profile Plus carries a 2 year limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or
7. v ee f Bl je BIR 3 aE n olz e s o 0 ee es Se ee ey fe N aa 8 8 R ci 5 o za ko a 3 o EL o S wo 0 9 lei Koj gt BE S A NE s sje 8 8 8 8 A a e E Si sie cc 8 e A alalalala d 3 E o gt Slo F 5 s vu b s o D O0 gt 6 lt a c S P 0 s D s Ij SIE 5 O d E la O ca Eh LL LE SST SST SST SST 8ZI STI TEeIOfOD SST 0 0 0 SST EST Y90109 SET SST 69 SET FCI IelojoD 0 SST 0 0 TST 6h7 910109 8el SST 8E IST OCI LIT Oogloj0 0 Do 861 S91 Eggs 791010 SEI SST 8E ISI 9TI ETI 6710109 0 ITET IST LOI mr TIh7 1910105 Ly IST Ly SST 711 601 870109 0 CCT LOI 8 DCL 0910109 SET 981 E SST 801 SOT L o 0 se 9p 0 9ET EET 6810105 Lvl Lvl SL SST OI TO1 9710109 0 SN Sol 44 TET 6TT 881010 ESI EST IST SST 001 Z6 S7009 0 KH 617 607 BTT STT LSJOJOD trl bri SST EH 96 6 polojoD 0 98 OV 0 po lz 9810105 LL SST pe LL 76 68 z10 0 0 L91 001 T OTZ LIT SO LL SST S6 LL 88 58 ZOO 0 991 L6 0 ITZ EIT pSlo o L9 SST E L9 18 18 T0109 0 SII 8 0 TIT6OZ Slo oD LL SST 00 LL O8 LL 0710109 0 0 SST 0 807 S0T 781010 LL SST LL 001 OL EL 610109 0 0 0 SST po 107 1910109 06 SST 06 OST TL 69 8110 09 0 TIT SP 0 00 Z6 OSJOJO L8 SST L8 961 89 59 LH 0 107 VE I 961 6 6 10 0 6 SST 6 Es 19 19 9119199 0 607 D TS 761 68 851010 96 9 T 96 SST 09 LS 0109 0 807 0 88T S8 LyI0199 6 TSI 6 SST I9S ES yllojoD 0 98 8E 0 P8I 18 9p10109 CH FCI 8 SST cS 6b HO 0 DCH T 88 O8I LL Splo 0 IZ LL IL SST By Sv ZIJOJOD 0 TIT
8. 5 SHUTTER STROBE Mega TRIPAR Profile Plus 5 Channel Mode LED OFF een ee ee LED ON NE pra RED STROBING SLOW FAST 0 255 0 100 LED ON di prei GREEN STROBE PULSE SLOW FAST 0 255 0 100 LED ON 1 3 BLUE RANDOM STROBE SLOW FAST O 255 0 100 LED ON 5 1 3 4 r 3 4 O 255 0 100 O 255 0 100 BLUE 0 255 0 100 UV 0 255 0 100 2 4 UV MASTER DIMMER O 255 0 100 O 255 0 100 O 255 0 100 ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 16 ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 17 Mega TRIPAR Profile Plus 9 Channel Mode 0 255 0 100 0 255 0 100 0 255 0 100 0 255 0 100 5 SHUTTER STROBE LED OFF LED ON STROBING SLOW FAST STROBE PULSE SLOW FAST LED ON RANDOM STROBE SLOW FAST LED ON Rare MASTER DIMMER 0 255 0 100 7 PROGRAM SELECTION MODE DIMMING MODE COLOR CHANGE MODE COLOR FADE MODE SOUND ACTIVE MODE COLOR MACROS PROGRAMS SOUND ACTIVITY COLOR MACRO MODE See page 24 for the Color Macro Chart COLOR CHANGE PROGRAMS COLOR CHANGE 2 COLOR CHANGE 3 LED ON COLOR MACRO MODE COLOR CHANGE 1 ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 18 Mega TRIPAR Profile Plus 9 Channel Mode Value Function COLOR MACROS PROGRAMS SOUND ACTIVITIY COLOR CHANGE PROGRAMS COLOR CHANGE 4 COLOR CHANGE 5 COLOR CHANGE 6 COLOR CHANGE 7 COLOR
9. C www adj com Mega TRIPAR Profile Plus User Manual Page 28 ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 29 Mega TRIPAR Profile Plus Specifications Model Mega TRIPAR Profile Plus Voltage 100V 240V 50 60Hz LEDs 5 x 4W 4 in 1 LED s RGB UV Beam Angle 40 Degrees Working Position Any safe working position Power Draw 21W Power Cord Daisy Chain 30 Fixtures Max Fuse 2 Amp Weight 2 7 Ibs 1 23Kgs Dimensions 8 75 L x 8 75 W x 3 25 A 225 x 220 x 85mm Colors RGB UV Mixing DMX Channels 5 DMX Modes 4 Channel Mode 5 Channel Mode 6 Channel Mode 9 Channel Mode amp 10 Channel Mode Warranty 2 Year 730 days Auto Sensing Voltage This fixture contains a automatic volt age switch which will auto sense the voltage when it is plugged into the power source Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 30 ADJ Products LLC 6122 S Eastern Ave Los Angeles CA 90040 USA Tel 323 582 2650 Fax 323 725 6100 Web www adj com E mail info americandj com A D J Supply Europe B V Junostraat 2 6468 EW Kerkrade Netherlands service adjgroup eu www adj eu Tel 31 45 546 85 00 Fax 31 45 546 85 99 Follow Us On HOM facebook com americandj twitter com americandj yo
10. COLOR CHANGE 14 COLOR CHANGE 15 COLOR CHANGE 16 COLOR FADE PROGRAMS COLOR FADE 1 COLOR FADE 2 COLOR FADE 3 COLOR FADE 4 COLOR FADE 5 COLOR FADE 6 COLOR FADE 7 COLOR FADE 8 COLOR FADE 9 COLOR FADE 10 COLOR FADE 11 COLOR FADE 12 COLOR FADE 13 COLOR FADE 14 COLOR FADE 15 COLOR FADE 16 ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 23 SOUND ACTIVE MODE 1 SOUND ACTIVE MODE 2 SOUND ACTIVE MODE 3 SOUND ACTIVE MODE 4 SOUND ACTIVE MODE 5 SOUND ACTIVE MODE 6 SOUND ACTIVE MODE 7 SOUND ACTIVE MODE 8 SOUND ACTIVE MODE 9 SOUND ACTIVE MODE 10 SOUND ACTIVE MODE 11 SOUND ACTIVE MODE 12 SOUND ACTIVE MODE 13 SOUND ACTIVE MODE 14 SOUND ACTIVE MODE 15 SOUND ACTIVE MODE 16 PROGRAM SPEED SOUND SENSITIVE 0 255 SLOW FAST O 255 LEAST SENSITIVE MOST SENSITIVE DIMMER CURVES STANDARD STAGE TV ARCHITECTURAL THEATRE DEFAULT TO UNIT SETTING Photometric Chart o E a i o a a D lt E AC ke e D o Color Macro Chart Mega TRIPAR Profile Plus 3 i E Ltr E T Ge E ELE SSES ai o o l elelalg ll Ki 5 ki k e EECHER H 2 Gi m 2 gt LO 6 8 HR In nI lt Be Sse v o e E z E JA Hr AABE el 2 2 SA ojoo o ae ZIS ei l T Els EIS
11. F Ly LTE h10 09 vL LL L6 SST priv ILojoD 0 661 Dr GTI TLI 69 p10109 vL vL STI SST Ov Le 0110105 0 ELT LL SLI 891 59 731010 LL LL 991 SST IEEE 610109 0 L6 S po 91 19 TplojoD vL vL 007 SST TE 6T 810109 0 ILI 6E pe O9T LS Oplojo LL LL 44 SST ST ST L10109 0 II 0 96 9ST ES 6 10 0 CH 8 SST ETT LAA 910109 0 0 LI OLI TST 6b 8 10 0 LL LL SST 091 OCI 810105 0 0 IZ YST Edi Lgo 8 CH SST LII IT EI Projo 0 86 s9 YST brl Iv gelojo LL TII SST LL TI 6 10109 0 SEI T6 ST DIr ggo 08 pol SST 08 8 S zoo 0 EST LL ST IET EE peo 08 pe SST 08 ril Ho 0 DA 907 SST TEI 67 KO 0 0 0 0 0 430 010103 AA ERR NAHUD OTA ATNVA AA TATA NATID ATA TIAVA ALISNALNI 20709 AN ADU XNA ON 10 09 ALISNALNI 40709 AN ADU XNA ON 10109 Mega TRIPAR Profile Plus User Manual Page 25 www adj com ADJ Products LLC Mega TRIPAR Profile Plus User Manual Page 24 www adj com ADJ Products LLC Mega TRIPAR Profile Plus With this feature you can connect the fixtures to one another using the IEC input and output sockets The quantity that can be connected is 30 fixtures maximum After 30 fixtures you will need to use a new power outlet They must be the same fixtures DO NOT mix fixtures Mega TRIPAR Profile Plus Power Cord Daisy Chain Fuse Replacement Disconnect the unit from its power source Remove the power cord from the unit Once the cord has been removed you will find that the fuse holder is located inside the po
12. ITED WARRANTY A ADJ Products LLC hereby warrants to the original purchaser ADJ Products LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase see specific warranty period on reverse This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service you must obtain a Return Authorization number RA before sending back the product please contact ADJ Products LLC Service Department at 800 322 6337 Send the product only to the ADJ Products LLC factory All shipping charges must be pre paid If the requested repairs or sevice including parts replacement are within the terms of this warranty ADJ Products LLC will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in it s original package No accessories should be shipped with the product If any accessories are shipped with the product ADJ Products LLC shall have no liability whatsoever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which ADJ Products LLC concludes
13. ND ACTIVE This button activate sound active mode In sound active mode use the and buttons to scroll through the 16 sound active programs You can also use the number buttons to select your Sound Active program Press the Speed but ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 13 Mega TRIPAR Profile Plus ADJ LED RC2 Operation ton to and use the and buttons to adjust the sound sensitivity SET ADDRESS Press this button to set the DMX address Press this button first then press the numbers to set the address Example Set DMX Address 1 Press 0 0 1 Set DMX Address 245 Press 2 4 5 R G B A Press either one of these buttons and the press the or to adjust the brightness A selects UV dimmer mode and Use these buttons to adjust the flash rate speed of the built in programs sound sensitivity and program selection DMX Control Operating through an DMX controller gives the user the freedom to create their own programs tailored to their own individual needs Follow the directions below to set your DMX channel mode and ad dress 1 Before connecting to an DMX controller your fixture has different DMX channel modes please select your desired mode by press ing the DMX Mode button then using the or buttons to scroll through the DMX Channel Modes Set the mode before you address the fixture See the bottom o
14. This button will let you access color change mode color fade mode auto run mode or static color mode Each press of this button will scroll change to the next mode When you found your desired mode use the or to scroll through the programs or static colors You can also use the number keys to se lect your desired program or color When using the auto run color fade or color change press the Speed button and use the or to adjust the running speed e If the Red LED s flash you are in Color Fade Mode e If the Green LED s flash you are in Color Change Mode e If the Blue LED s flash you are in Auto Run Mode e If the UV LED flashes you are in Static Color Mode FLASH This button will activate the strobe effect You can control the flash rate by pressing the and buttons Press this button again to exit strobe mode SPEED Press this button and use the amp buttons to adjust the speed of the auto run color change and color fade or adjust the sound sensitivity in sound active mode DMX MODE Pressing his button will scroll through DMX address ing DMX Channel mode DMX last state setting and dimming curves Some fixtures will come with different DMX channel modes When your desired menu submenu is found use the amp buttons to scroll through the settings See page 14 for DMX control See pages 16 23 for DMX modes values and traits SLAVE SA SOU
15. This function will allow you to control each individual fixture s traits with a standard DMX 512 controller 2 Torun your fixture in DMX mode press the MODE button until d XXX is displayed XXX represents the current displayed DMX address Use the UP or DOWN buttons to select your desired DMX address then press the SETUP button to select your DMX Channel mode 3 Use the UP or DOWN buttons to scroll through the DMX Channel modes The Channel modes are listed below To run the 4 Channel Mode press the MODE button until Ch04 is displayed This is the 4 Channel DMX Mode To run the 5 Channel Mode press the MODE button until Ch05 is displayed This is the 5 Channel DMX Mode To run the 6 Channel Mode press the MODE button until Ch06 is displayed This is the 6 Channel DMX Mode ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 9 Mega TRIPAR Profile Plus Operating Instructions e To run the 9 Channel Mode press the MODE button until Ch09 is displayed This is the 9 Channel DMX Mode e To run the 10 Channel Mode press the MODE button until Ch10 is displayed This is the 10 Channel DMX Mode 4 Please see pages 16 23 for DMX values and traits 5 After you have chosen your desired DMX Channel mode plug in the fixture via the XLR connections to any standard DMX control ler Default Running Mode This is a default running mode When this mode is activated all modes
16. X fixtures may be implemented in a 3 pin DMX line When inserting stan dard 5 pin data cables in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The chart below details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion 3 Pin XLR Female Out 5 Pin XLR Male In Ground Shield Pin 1 Data Compliment signal Pin 2 Data True signal Pin 3 Not Used Do Not Use Not Used Do Not Use ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 6 Mega TRIPAR Profile Plus Operating Instructions System Menu The display will lock after 30 seconds press the MODE button for 3 seconds to unlock LED Display On Off To set the LED display to turn off after 10 seconds press the MODE button until don is displayed press the UP button to display doff Now the display will disappear after 10s Press any button to turn the display on again Be advised though that the display will turn off automatically after 10 seconds To set the display press the MODE button until dXX is displayed Use the UP or DOWN buttons to select either don LED display on at all times doFF LED display shuts off after 10 seconds LED Display Inversion Follow these instructions to flip the display 180 so that the display can be read upside down 1 Plug the fixture in and press the MODE button until dXX is dis played
17. e modes A JF Both Color Fade and Color Change modes running 2 After you have chosen your desired running mode press the SET ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 8 Mega TRIPAR Profile Plus Operating Instructions UP button until SP XX is displayed When this is displayed you can adjust the running speed of your desired program Use the UP or DOWN button to adjust the speed between SP 01 slow est and SP 16 fastest Once you have set your desired running speed press the SET UP button to return to your desired Auto Run Mode Static Color Mode 1 Plug the fixture in and press the MODE button until CLXX is dis played 2 There are 64 colors to choose from Select your desired color by pressing the UP and DOWN buttons After you have selected your desired color you can activate strobing by pressing the SET UP button to enter the Flash strobe mode 3 FS XX will be displayed this is Flash mode The Flash can be adjusted between FS 00 flash off to FS 15 fastest flash DMX Mode Operating through a DMX controller gives the user the freedom to create their own programs tailored to their own individual needs This function also allows you to use your fixtures as spot lights The Mega TRIPAR Profile Plus has 5 DMX modes 4 channel mode 5 channel mode 6 channel mode 9 channel mode and a 10 channel mode See page s 16 23 for each mode s DMX traits 1
18. el 8 is in Color Fade Mode and Channel 9 will control the color fade speed When Channel 7 is between the values of 205 255 Channel 8 is in Sound Active Mode and Channel 9 will control the sound sensitivity ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 20 10 Channel Mode Function RED 0 100 GREEN 0 100 BLUE 0 100 UV 0 100 SHUTTER STROBE LED OFF LED ON STROBING SLOW FAST LED ON STROBE PULSE SLOW FAST LED ON RANDOM STROBE SLOW FAST LED ON MASTER DIMMER 0 100 PROGRAM SELECTION MODE DIMMING MODE COLOR MACRO MODE COLOR CHANGE MODE COLOR FADE MODE SOUND ACTIVE MODE COLOR MACROS PROGRAMS SOUND ACTIVITY COLOR MACRO MODE See page 24 for the Color Macro Chart COLOR CHANGE PROGRAMS COLOR CHANGE 1 COLOR CHANGE 2 COLOR CHANGE 3 ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 21 Mega TRIPAR Profile Plus CHANNEL VALUE 10 Channel Mode Function COLOR MACROS PROGRAMS SOUND ACTIVITIY COLOR CHANGE PROGRAMS Mega TRIPAR Profile Plus CHANNEL VALUE Mega TRIPAR Profile Plus CHANNEL VALUE 10 Channel Mode Function COLOR MACROS PROGRAMS SOUND ACTIVITY SOUND ACTIVE PROGRAMS ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 22 COLOR CHANGE 4 COLOR CHANGE 5 COLOR CHANGE 6 COLOR CHANGE 7 COLOR CHANGE 8 COLOR CHANGE 9 COLOR CHANGE 10 COLOR CHANGE 11 COLOR CHANGE 12 COLOR CHANGE 13
19. er DMX data transmission when using several DMX fixtures try to use the shortest cable path possible The order in which fixtures are connected in a DMX line does not influence the DMX addressing For example a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line at the beginning at the end or anywhere in the middle When a fixture is assigned a DMX address of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain Data Cable DMX Cable Requirements For DMX Operation The Mega TRIPAR Profile Plus can be controlled via DMX 512 protocol The Mega TRIPAR Profile Plus has 5 DMX modes please see pages 9 10 for the different modes The DMX address is set on the back panel of the Mega TRIPAR Profile Plus Your unit and your DMX controller require a standard 3 pin XLR connec tor for data input and data output Figure 1 We recommend Accu Cable DMX cables If you are making your own cables be sure to use standard 110 120 Ohm shielded cable This cable may be purchased at almost all pro lighting stores Your cables should be made with a male and female XLR connector on either end of the cable Also Figure 1 remember that DMX cable must be daisy chained and cannot be split ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 5 Mega TRIPAR Profile Plus DMX Set Up Notice Be sure to follow figures two and three when making yo
20. f this page for the DMX modes 2 After you have selected your mode set the DMX address for the fixture by pressing the S button When the S button is pressed the LED s will flash 2 3 times and all the red LED s will light Use the number buttons to press in your desired address See SET ADDRESS at the top of this page for examples Note When seeting the DMX address each time a number is pressed a LED color will glow when you have set the DMX address correctly all LED s will flash 2 3 times 3 Now you may connect the fixture via the XLR connections to any standard DMX controller Please see pages 16 23 to for a detailed descriptions of the DMX modes values and traits e If All LED s flash you are in DMX Mode 1 4 DMX Channel If the Red LED s flash you are in DMX Mode 2 5 DMX Channels If the Green LED s flash you are in DMX Mode 3 6 DMX ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 14 Mega TRIPAR Profile Plus ADJ LED RC2 Operation Channels e If the Blue LED s flash you are in DMX Mode 4 9 DMX Channels e If the UV LED flashes you are in DMX Mode 5 10 DMX Channels ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 15 Mega TRIPAR Profile Plus 4 Channel Mode Mega TRIPAR Profile Plus 6 Channel Mode Channel Value Function ec Value Function O O 255 0 100 O 255 0 100 O 255 0 100 peu O 255 0 100
21. lling unit and the others will react to the controlling units built in programs Any unit can act as a Master or as a Slave however only one unit can be programmed to act as the Master Master Slave Connections and Settings 1 Daisy chain your units via the XLR connector on the rear of the unit Use standard XLR data cables to link your units together Remember that the Male XLR connector is the input and the Female XLR con nector is the ouput The first unit in the chain master will use the female XLR connector only The last unit in the chain will use the male XLR connector only 2 Connect the first Slave unit to the Master 3 Set the Master unit to your desired mode of operation Set the Slave unit s to the DMX address setting The Slave unit s will now follow the Master ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 12 Mega TRIPAR Profile Plus ADJ LED RC2 Operation The ADJ LED RC2 infrared remote sold seperately has many dif fernet functions and gives you complete control of your Mega TRIPAR Profile Plus To control the your desired fixture you must aim the con troller at the front of the fixture and be no more the 30 feet away To use the ADJ LED RC2 you must first activate the fixtures infrared re ceiver to activate the receiver please see the instructions on page 11 BLACKOUT Pressing this button will blackout the fixture PROGRAM SELECTION
22. not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper included in the ship ping carton If the unit is under warranty you must provide a copy of your proof of purchase invoice You may obtain a R A number by con tacting our customer support team on our customer support number All packages returned to the service department not displaying a R A number on the outside of the package will be returned to the shipper Mega TRIPAR Profile Plus The unit should be mounted using a mounting clamp not provided affixing it to the mounting bracket that is provided with the unit Always ensure that the unit is firmly fixed to avoid vibration and slip ping while operating Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times the unit s weight Also always use a safety cable that can hold 12 times the weight of the unit when installing the fixture The equipment must be installed by a professional and it must be installed in a place where it is out of the reach of people s grasp Installation ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 3 Mega TRIPAR Profile Plus Safety Precautions To reduce the risk of electrical shock or fire d
23. o not expose this unit rain or moisture Do not spill water or other liquids into or on to your unit Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short e Disconnect from main power before making any type of connection Do not remove the cover under any conditions There are no user serviceable parts inside e Never operate this unit when it s cover is removed e Never plug this unit in to a dimmer pack e Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall Do not attempt to operate this unit if it becomes damaged e This unit is intended for indoor use only use of this product out doors voids all warranties During long periods of non use disconnect the unit s main power e Always mount this unit in safe and stable matter e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the point they exit from the unit Cleaning The fixture should be cleaned only as recommended by the manufacturer See page 26 for cleaning details e Heat The appliance should be situated away from heat sources such as radiators heat registers stoves
24. sted the RGB amp UV colors to make your desired color you can then activate strobing by pressing the SET UP button to enter the Flash strobe mode 7 FS XX will be displayed this is Flash mode The Flash can be adjusted between FS 00 flash off to FS 15 fastest flash Sound Active Mode In this mode the Mega TRIPAR Profile Plus will react to sound and chase through the different colors 1 Plug the fixture in and press the MODE button until SoXX is dis played XX represents the sound active mode 1 16 currently displayed 2 The fixture will now change via sound 3 Press the SET UP button to adjust the sound sensitivity SJ X should be displayed Use the UP or DOWN buttons to adjust the sensitivity SJ 1 is the lowest sensitivity SJ 8 is the highest Auto Run Mode There are 3 types of Auto Run Modes to choose from Color Fade Color Change and both modes running together The running speed is adjustable in all 3 modes 1 Plug the fixture in and press the MODE button until either AFXX AJXX or A JF is displayed Use the SET UP button to scroll through the 3 different Auto Run modes AFXX Color Fade mode there are 16 Color Fade modes to choose from Use the UP or DOWN buttons to scroll through the different Auto Fade modes AJXX Color Change mode there are 16 Color Change modes to choose from Use the UP or DOWN buttons to scroll through the different Auto Chang
25. ur own cables Do not use the ground lug on the XLR connector Do not con nect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR s outer casing Grounding the shield could cause a short circuit and erratic behavior COMMON DMX512 OUT DMX512 IN 3 PIN XLR DMX 3 PIN XLR XLR Male Socket XLR Female Socket 1 Ground g 2 Cold Figure 3 Special Note Line Termination When longer runs of cable are used you may need to use a terminator on the last unit to avoid erratic behavior A terminator is a 110 120 ohm 1 4 watt resistor which is con nected between pins 2 and 3 of a male XLR connector DATA and DATA This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line Using a cable terminator ADJ part number Z DMX T will decrease the possibilities of erratic behavior Termination reduces signal errors and avoids signal transmission problems 2 and interference It is always advisable D G to connect a DMX terminal Resistance 120 Ohm 1 4 W between PIN 2 DMX and PIN 3 DMX of the last fixture Figure 4 Figure 2 XLR Pin Configuration 1 1 2 Cold 1 Ground 1 Pin 1 Ground 1 Pin 2 Data Compliment negative 1 1 1 1 1 PRtSsssssssssss 57 Pin 3 Data True positive 5 Pin XLR DMX Connectors Some manufactures use 5 pin DMX 512 data cables for DATA transmission in place of 3 pin 5 pin DM
26. us User Manual Page 10 Mega TRIPAR Profile Plus Operating Instructions Dimmer Curve This is used to set the dimming curve used with DMX mode See page 25 for the dimming curves chart 1 Plug the fixture in and press the MODE button until d XXX is dis played XXX represents the current displayed DMX address 2 Press the SET UP button until dr X is displayed X represents the displayed dimmer curve 0 4 e 0 Standard e 1 Stage e 2 TV e 3 Architectural 4 Theatre 3 Press the UP or DOWN buttons to scroll through and select your desired dimming curve ADJ LED RC2 This function is used to activate and deactivate the ADJ LED RC2 Remote Control When this function is activated you can control the fixture using the ADJ LED RC2 Please see the next page for ADJ LED RC2 controls and functions 1 Plug the fixture in and press the MODE button until dXX is dis played XX represents either on or oFF 2 Press the SET UP button until IrXX is displayed XX represents either on or oF 3 Press the UP or DOWN buttons to either activate the remote func tion On or deactivate it Off ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 11 Mega TRIPAR Profile Plus Master Slave Configuration Master Slave Configuration This function will allows you to link units together to run in a Master Slave set up In a Master Slave set up one unit will act as the contro
27. utube com adjlighting
28. warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall ADJ Products LLC be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product This warranty is the only written warranty applicable to ADJ Products LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published MANUFACTURER S LIMITED WARRANTY PERIODS e Lighting Products 1 year 365 days Limited Warranty Such as Special Effect Lighting Intelligent Lighting UV lighting Strobes Fog Machines Bubble Machines Mirror Balls Par Cans Trussing Lighting Stands etc excluding LED Laser Products and lamps e Laser Products 90 Day Limited Warranty es L E D Products 2 year 730 days Limited Warranty excluding motors PCB boards and power supplies which have a 1 year 365 day Limited Warranty and batteries which have a 180 day limited warranty ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 27 Mega TRIPAR Profile Plus Notes Mega TRIPAR Profile Plus Notes ADJ Products LL
29. wer socket Insert a flat head screw driver into the power socket and gently pry out the fuse holder Remove the bad fuse and replace with a new one The fuse holder also has a holder for a spare fuse Mega TRIPAR Profile Plus Listed below are a few common problems the user may encounter with solutions Trouble Shooting Unit not responding to DMX 1 Check that the DMX cables are connected properly and are wired correctly pin 3 is hot on some other DMX devices pin 2 may be hot Also check that all cables are connected to the right connectors it does matter which way the inputs and outputs are connected Unit does not respond to sound 1 Quiet or high pitched sounds will not activate the unit 2 Make sure that Sound Active mode is activated Mega TRIPAR Profile Plus Due to fog residue smoke and dust cleaning the internal and exter nal optical lenses must be carried out periodically to optimize light output 1 Use normal glass cleaner and a soft cloth to wipe down the outside casing Cleaning 2 Clean the external optics with glass cleaner and a soft cloth every 20 days 3 Always be sure to dry all parts completely before plugging the unit back in Cleaning freguency depends on the environment in which the fixture operates i e smoke fog residue dust dew ADJ Products LLC www adj com Mega TRIPAR Profile Plus User Manual Page 26 Mega TRIPAR Profile Plus Warranty MANUFACTURER S LIM
30. wer when not in use Thank you Mega TRIPAR Profile Plus Introduction Unpacking Thank you for purchasing the Mega TRIPAR Profile Plus by ADJ Products LLC Every Mega TRIPAR Profile Plus has been thoroughly tested and has been shipped in perfect operating condi tion Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged care fully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact In the case damage has been found or parts are missing please contact our toll free cus tomer support number for further instructions Do not return this unit to your dealer without first contacting customer support Introduction The ADJ Mega TRIPAR Profile Plus is a DMX intelligent high powered LED par fixture This fixture can be used in a stand alone mode or connected in a Master Slave configuration This wash has five operating modes Sound Active mode Auto mode RGB UV Dimmer mode Static Color mode and DMX control mode To optimize the performance of this product please read these operating instructions carefully to familiarize yourself with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference Customer Support ADJ Products LLC provides a customer support line to provide set
31. will return to their default settings 1 Plug the fixture in and press the MODE button until dXX is dis played XX represents either on or oFF 2 Press the SET UP button until dEFA is displayed 3 Press the UP and DOWN buttons simultaneously Press the MODE button to exit DMX State This mode can be used as a precaution mode that in case the DMX signal is lost the operating mode chosen in the setup is the running mode the fixture will go into when the DMX signal is lost You can also set this as the operating mode you would like the unit to return to when power is applied 1 Plug the fixture in and press the MODE button until d XXX is dis played XXX represents the current displayed DMX address 2 Press the SET UP button so that nodn is displayed Use the UP and DOWN buttons to scroll through the DMX states PLAC Blackout If the DMX signal is lost or interrupted the unit will automatically go into stand by mode LASt Last State If the DMX signal is lost or interrupted the fixture will stay in the last DMX set up If power is applied and this mode is set the unit will automatically go into the last DMX set up ProG Auto Run If the DMX signal is lost or interrupted the unit will automatically go into Auto Run mode 3 Use the UP and DOWN buttons to find your desired DMX state and press SET UP to confirm and exit ADJ Products LLC www adj com Mega TRIPAR Profile Pl
Download Pdf Manuals
Related Search