USER MANUAL
Contents
1. Street Address City Country Postal Code Telephone Purchased Date Purchased From Dealer Name and Address Product Purchased Serial Number Future Mobility Healthcare Products 3223 Orlando Drive Mississauga Ontario L4V 1C5 Fax 905 671 3377 J2mQozod ALNIOIWN SYN LNSF INI JYVIHITVIH ALITISOW SAUNA e wor JIQOWIININIMMM 1J09 A3111q04131 040 391419513410 5N3 liIeU B 98Z6 E8Z 9TL Xe4 L88 8 6 SS8 T OET6 E8Z 9TZ Ud OTZYT AN ojeyng aoeld JaAld olejbngT 31M SN gonpold IN aunlnd vsn eo YIQOWSININFMMM e9 A1iqou3101040 331419513UJ0 5N3 jieU a LLEE TL9 SO6 Xey TIO ZEZ 888 T T99T TL9 S06 4d SIT Av NO ednessissivy aAUQ OPULO EZZE 94 sjeoUleaH Aqiqow ainanj VQVNVD2. apparatus Future Mobility Healthcare Inc shall NOT be liable for bodily injury or damage to the wheelchair and the warranty is void QSF 390 UM 1024404 REVO3 08 20 13 31 Stellato WARRANTY 15 Warranty This warranty is extended only to the original purchaser user of our products Future Mobility Healthcare Inc FMHI warrants its Stellato II Wheelchair parts and miscellaneous components to be free from defects in materials and workmanship for one 1 year from the date of purchase The frame is warranted for the lifetime of the original purchaser user The upholstery is warranted for 90 days upon normal usage by original purchaser If within this warranty period the product shall be proven to be defective such product shall be repaired or replaced at FMHI discretion FMHI s sole obligation and your exclusive remedy under this warranty shall be limited to the repair and or replacement of the product or its parts This warranty does not include any labour or shipping charges incurred in replacement part installation or repair of any product For warranty service please contact the dealer from whom you purchased your FMHI product In the event you do not receive satisfactory warranty service please write directly to FMHI Provide the dealer s name address model number date of purchase and indicate the nature of the defect DO NOT return products to FMHI without our prior consent The defective unit or parts must be returned for w
3. 3 10 1 GENERAL Stellato 2 FRONT RIGGINGS 2 Front Riggings WARNING After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened securely otherwise injury or damage may occur Installing 1 Turn the front rigging assembly to the side open front rigging is perpendicular to wheelchair 2 Install the hinge plates on the front rigging assembly onto the hinge pins on the wheelchair frame 3 Push the front rigging assembly towards the inside of the wheelchair until it locks into place 4 Repeat this procedure for the other front rigging assembly 5 To release the front rigging pull the front rigging Figure 1 Upgraded Leg Rest release lever outward rotate front rigging outward QSF 390 UM 1024404 REV03 08 20 13 11 Stellato 2 FRONT RIGGINGS Removing 1 Pull the front rigging release lever outward Rotate swingaway front rigging assembly outward 2 Lift the swingaway front rigging assembly off the hinge pins Figure 2 Pin Stlye Leg Rest QSF 390 UM 1024404 REV03 08 20 13 12 Stellato 3 Foot Plate Height Adjustment Note This procedure applies to the swingaway front riggings and swingaway elevating legrest 1 Remove the front rigging assembly Refer to INSTALLING REMOVING THE FRONT RIGGING in this section of the manual 2 Remove footrest bracket bolt Slide footrest extension tube up or down to desired height 3 Re tighten
4. E FUTUR MOBILITY HEALTHCARE INC 510 REVO3 REV DATE 08 20 2013 STELLATO USER MANUAL 1 NY OU A W CONTENTS Generalene E AA EEE EE E E E R R O ES TaS O de E E A cai 4 Operating Safety Warning Strossin oare da A AAA das 5 A NAO 6 Safety OSEA oc 7 TOUDISSHOOEING io ii a DE RCA Diaz 9 ESA RO RARO NN 10 ER dea 11 MM a ET 11 REMOVING ta 12 Foot Plate Height Adjustment seresa aeaiee ei earet NE iA AEREE SEAE Ara T EKE OSKA AEN E EErEE AS e Nara EEEk 13 Elevating Leg Rest Operati A nenene eiia ieii inen EEEE EAE A E ENO EEEE EREE NE AAE ERA EE EEEE E AAA A Eie h 14 NEE E A EN T E N ENE E O 15 Flip p Arm Re StS etine iia ee ii e TEE E EEEE A A a Ea ade 16 Replacihs Dolo 17 REPLACING THE SEAT UPHOLSTERY voces a do 17 REPLACING THE BACK URHOSTERY corro das 18 Rear Wheel AGjUStIMONtS A AS E 19 Unfolding and Folding the Wheel Chair ee sse es 21 UPTg 21 570 REVO3 REV DATE 08 20 2013 2 Stellato CONTENTS TO AS C A E E E A NN 22 INSTALLING REPLACING FRONT CASTERS AND FORKS cccsscssscesscescsecssecseecseecsesseseseseseseessensceascsaecssecsaecaeseaeseeeseeeseeseetees 22 Adjusting Front Casten Anigl es sce sos in IRSA A A E Ada IRAN 23 11 Anti NN 24 Installing Adjusting The Anti Tippers e e a a a Eaa o a a aa E eE eda rN Ena diss
5. No excessive side movement or binding when V lifted and spun e Inspect for cracked bent or broken spokes V HANDRIMS e Inspect for signs of rough edges or peeling V FRONT CASTERS FORKS e Inspect axle assembly for proper tension by V spinning caster caster should come to a gradual stop e Adjust bearing system if wheel wobbles or binds V to a stop Ensure wheel bearings are clean and free of moisture e Check head tube locknuts for tightness V e Inspect casters for cracks and wear V e Inspect for cracked bent or broken spokes v CLEANING e Clean upholstery and armrests V 570 REV03 REV DATE 08 20 2013 8 Stellato Troubleshooting Please refer to the chart below for a fix to the problem with the wheel chair 1 GENERAL Chair Veers Chair Sluggish Caster Squeaks and Looseness in Solutions Right Left Wheels Turn or Flutter Rattles Chair Performance V V V V Check tires for correct and equal pressure V V V V Check for loose nuts and bolts V V V Check caster head tube angle V V Check that rear wheels are equally spaced away from seat frame 570 REVO3 REV DATE 08 20 2013 Stellato Labels Stellato Labels can be found on the lower frame underneath the seating bed of the wheel chair WARNING Do not operate without anti tippers mechanism in place Unit may tip backwards WEIGHT CAPACITY 250lbs 114 kilos Refer to the owner s manual 570 REVO3 REV DATE 08 20 201
6. UP ARM RESTS 6 Flip up Arm Rests After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened securely otherwise injury or damage may occur PONT Arm Height Adjustment Height Adjustable Arm Rest t ARMREST 4 Loosen knob SWING RELEASE BACK 5 Lift armrest until desired position is acquired ranges from 9 14 in increments 6 Re tighten knob ARMREST SOCKET Figure 6 Engaging Flip Up Arm Rest QSF 390 UM 1024404 REVO3 08 20 13 16 Stellato 7 Replacing Upholstery WARNING After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened securely otherwise injury or damage may occur REPLACING THE SEAT UPHOLSTERY 1 Remove the front universal plugs that retain the existing insert rod to the wheelchair seat rail 2 Remove the existing seat upholstery from the seat rail 3 Install NEW seat upholstery by reversing steps 1 and 2 QSF 390 UM 1024404 REVO3 08 20 13 17 7 REPLACING UPHOLSTERY and N NSERTROD Y _ PLUG UNIVERSAL td Y SEAT UPHOLSTERY Figure 7 Seat Upholstery Stellato REPLACING THE BACK UPHOSTERY Slip on Back Upholstery 1 Remove the two 2 mounting screws and washers that secure the existing back upholstery to the back canes Pull the loose back cane out of the existing back u
7. actice bending reaching and transferring activities in several combinations in the presence of a qualified healthcare professional BEFORE attempting active use of the wheelchair Always verify that hand grips on the rear cane are secure PRIOR to use when an attendant is used to propel or lift the chair Check for any signs of looseness or deterioration and if found contact a qualified technician DO NOT attempt to move the wheelchair by hand grips if they are broken gt DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame rails are fully seated into the side frame H blocks DO NOT TRAVERSE CLIMB or GO DOWN ramps or slopes greater than 9 degrees DO NOT attempt to move up or down an incline with a water ice or oil film DO NOT operate on roads streets or highways DO NOT attempt to ride over curbs or obstacles Doing so may cause your wheelchair to tip over and cause bodily harm to you or damage to the wheelchair DO NOT attempt to reach objects if you have to move forward in the seat DO NOT attempt to reach objects if you have to pick them up from the floor by reaching down between your knees VVVV Vv QSF 390 UM 1024404 REV03 08 20 13 29 Stellato 13 OPERATING INFORMATION DO NOT lean over the top of the back upholstery This will change your center of gravity and may cause you to tip over DO NOT shift your weight or sitting position toward direction you are reaching as the wheelchair may tip ove
8. allation Stellato 3 Repeats steps 1 amp 2 for the opposite rear wheel 4 To reinstall the rear wheel onto the wheelchair reverse steps 1 to 3 WARNING Make sure the detent pin and locking pins of the quick release axle are fully released BEFORE operating the wheelchair The locking pins MUST be protruding past the inside of the rear wheel axle bushing for a positive lock Keep locking pins clean Future Mobility Healthcare Inc recommends inserting quick release axles with the detent pin to the inside of the wheelchair to prevent accidental release during contact activities QSF 390 UM 1024404 REVO3 08 20 13 20 8 REAR WHEEL ADJUSTMENTS DETENT PIN r LOCKING PIN OUTSIDE OF E INSIDE OF WHEELCHAIR 7 WHEELCHAIR uei AXLE Figure 10 Locking Pin and Detent Pin Stellato 9 Unfolding and Folding the Wheel Chair WARNING 1 Keep hands and fingers clear of moving parts to avoid injury DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame rails are fully seated into the side frame H blocks Unfolding 2 Open the wheelchair by grasping the armrest of the wheelchair closest to you 3 Tilt the wheelchair towards you raising the opposite wheel and caster off the ground floor 4 Push downward on the TOP of the seat rail closest until the wheelchair is fully open and locked into H blocks 5 Engage both wheel locks open the footrest leg
9. arranty inspection within thirty 30 days of the return authorization date FMHI will issue a return authorization number Please prepay all shipping charges C O D shipments will be refused LIMITATIONS and EXCLUSIONS This warranty shall not apply to problems arising from normal wear or failure to adhere to the enclosed instructions Products subjected to negligence accident improper usage maintenance or storage or products modified without FMHI written consent including but not limited to modification through the use of any unauthorized parts or attachments products damaged by reason or repairs made to any component without the specific consent of FMHI or products repaired by anyone other than a FMHI dealer Such evaluation shall be determined by FMHI The foregoing warranty is exclusive and in lieu of all other expressed warranties It shall not extend beyond the duration of the expressed warranty provided herein and the remedy for violations of any implied warranty shall be limited to repair or replacement of the defective product pursuant to the terms contained herein FMHI shall not be liable for any consequential or incidental damages whatsoever Cut below this line o Warranty Registration Form To validate your Future Mobility HealthCare warranty please complete the below form and return it the address at the end of this form Visit online at www futuremobility ca for more Future Mobility Products Print and Mail it to Name
10. bolt QSF 390 UM 1024404 REVO3 08 20 13 3 FOOT PLATE HEIGHT ADJUSTMENT FRONT RIGGING SUPPORT p E Figure 3 Height Adjustable FootPlate 13 Stellato 4 ELEVATING LEG REST OPERATION 4 Elevating Leg Rest Operation Instructions Raising Lowering the Elevating Leg rest 1 To adjust the angle of the elevating leg rest turn the handle knob counter clockwise to disengage from the index rod 2 Lift the leg rest to the desired angle 3 Re tighten the handle knob such that the leg rest arm remains firmly in position 4 Swing inwards until the latch engages and locks into the U Bolt Figure 4 Elevating Leg Rest QSF 390 UM 1024404 REVO3 08 20 13 14 Stellato 5 ARMS 5 Arms WARNING After ANY adjustments repair or service and BEFORE use al make sure all attaching hardware is tightened securely ee otherwise injury or damage may occur Arm Height Adjustment Height Adjustable Arm Rest 1 Loosen knob N 2 Lift armrest until desired position is acquired a p A ranges from 9 14 in increments a 3 Re tighten knob a Figure 5 Height Adjustment QSF 390 UM 1024404 REVO3 08 20 13 15 Stellato 6 FLIP
11. h E Te 7 N Figure 16 Pull to Lock lt UNLOCKED POSITION LOCKED POSITION Figure 17 Push to Lock Stellato ADJUSTING THE PATIENT OPERATED WHEEL LOCKS 1 2 Disengage the wheel locks CLAMP ON Wheel Locks loosen the two 2 socket screws that secure the wheel lock to the wheelchair frame Reposition the wheel lock so that when engaged the wheel lock shoe embeds the tire 1 8 3 16 for pneumatic tires and HOLDS the occupied wheelchair in place when pushed Securely tighten the bolt and locknut or socket screws securing the wheel lock to the wheelchair frame Engage the wheel lock Measure the distance the wheel lock is embedded into the tire Repeat STEPS 1 to 6 until the wheel lock shoe embeds the tire and HOLDS the occupied wheelchair in place when pushed Engage both wheel locks and ensure the occupied wheelchair is held in place when pushed QSF 390 UM 1024404 REVO3 08 20 13 28 12 WHEEL LOCKS OPERATION WHEEL LOCK paN CLAMP CA SOCKET SCREWS ny WHEELCHAIR FRAME A Figure 18 Positioning the Wheel Locks Stellato 13 OPERATING INFORMATION 13 Operating Information WARNING Unless otherwise noted all service and adjustment should be performed while the wheelchair is unoccupied To determine and establish your particular safety limits pr
12. ii 24 25 ADJUSTING THE ANTIETIPPERS O A A ticas 26 12 Wheel Locks Operati O OS A A does Munda vane E A SS 27 ADJUSTING THE PATIENT OPERATED WHEEL LOCKS Ne 28 13 OPerating Information A cane 29 TA WEIBE Talli RR RNA 31 A A A in Baa ata AEEA ANA 32 570 REVO3 REV DATE 08 20 2013 3 Stellato 1 1 General NOTE Check all parts for shipping damages before using In case of damage do NOT use the equipment Contact the Equipment Supplier for further instructions WARNING DO NOT install this equipment without first reading and understanding this instruction booklet If you are unable to understand these instructions contact a healthcare professional dealer or technical personnel before attempting to install this equipment otherwise injury or damage may occur NOTE Information contained within this document is subject to change without notice 570 REVO3 REV DATE 08 20 2013 4 GENERAL Stellato 1 GENERAL Operating Safety Warnings Please read and obey all instructions and warnings listed in this manual ignoring these warnings could result in serious injury to the patient or attendants e Ensure anti tippers are always installed in the correct position when using the wheelchair e Never lift the wheelchair by the armrests or front rigging e Any change of seat depth may require repositioning of the rear wheels always test the stability of the chair before use e Ne
13. ing angle Removable rear wheels with stainless steel or plastic coated hand rims 60 or 70 swing away upgraded front riggings Aluminum or composite foot plates Wheels locks push or pull to lock with extension handles Adjustable rear anti tippers Optional quick release axles Heel loops FRAME Lightweight Aluminum Stellato Safety Inspection Checklist Initial adjustments should be made to suit your personal body structure needs and preference Thereafter follow these maintenance procedures 1 GENERAL Item Initially Weekly Monthly Periodically GENERAL e Wheelchair rolls straight no excessive drag or pull V V to one side FRAME AND CROSSBRACES e Inspect for loose or missing hardware V V e Inspect for bent frame or cross braces V V WHEEL LOCKS e Do not interfere with tires when rolling V V e Pivot points free of wear and looseness V V e Wheel locks easy to engage V V e Wheel locks prevent chair from moving when v V engaged SEAT AND BACK e Inspect for rips or sagging V V e Inspect for loose or broken hardware V V e Inspect cane and hand grips for wear looseness V V Oo 570 REVO3 REV DATE 08 20 2013 7 Stellato 1 GENERAL TIRES e Inspect for flat spots cracks and wear V Caution as with any vehicle the wheels and tires should be checked periodically for cracks and wear and should be replaced REAR WHEELS e f equipped quick release axles lock properly V e
14. n ANTI TIPPER RELEASE FRAME TUBING BUTTONS GLIDE BUSHING ANTI TIPPER WHEELS Figure 14 Anti Tippers Stellato much as the anti tippers are an option for 0 degrees or3 degrees on this wheelchair you may order with or without the anti tippers Future Mobility Healthcare Inc strongly recommends ordering the anti tippers as a safeguard for the wheelchair user Seat to floor angle of 6 degrees if changing the seat to floor angle to 6 degrees anti tippers MUST be ordered and installed Anti tippers MUST be fully engaged and release buttons fully protruding out of adjustment holes Ensure both anti tippers are adjusted to the same mounting hole Installing Anti Tippers Press the release buttons IN and insert the anti tippers with the anti tipper wheels pointing toward the ground floor into the rear frame tubing until the bottom release button locks in place Measure the distance between the bottom of the anti tipper wheels and the ground floor QSF 390 UM 1024404 REVO3 08 20 13 25 RELEASE BUTTON 11 ANTI TIPPERS Figure 15 Anti Tippers Adjustment Criteria STELLATO Seat to Floor Anti Tippers Height 13 25 14 5 Small Anti tip assembly 1003816 15 16 5 Medium Anti tip assembly 1006351 17 19 0 Large Anti tip assembly 1003815 Stellato 11 If the distance between the bottom of the anti tipper wheels a
15. nd the ground floor is not 1 to 2 adjust the anti tippers Refer to ADJUSTING THE ANTI TIPPERS in this section of the manual Note A1 to 2 clearance between the bottom of the anti tipper wheels and the ground floor MUST be maintained at all times ADJUSTING THE ANTI TIPPERS 1 Press the release buttons on the wheeled portion of the anti tipper and slide it up or down to achieve the 1 to 2 clearance 2 Check to make sure that the release buttons are fully engaged in adjustment holes NOTE Refer to the following chart to ensure the correct anti tipper is installed in the wheelchair Seat to floor heights are approximate depending on front caster size and type Also note the anti tippers come in various bends for various height ratios QSF 390 UM 1024404 REVO3 08 20 13 26 ANTI TIPPERS Stellato 12 Wheel Locks Operation WARNING DO NOT attempt to stop a moving wheelchair with the wheel locks WHEEL LOCKS ARE NOT BRAKES otherwise injury or damage may occur 1 Ensure the wheelchair is not moving before engaging the wheel locks 2 Perform one 1 of the following a Push to Lock to engage push the wheel lock handle forward b Pull to Lock to engage pull the wheel lock handle backward 3 Disengage the wheel locks by reversing STEP 2 QSF 390 UM 1024404 REVO3 08 20 13 27 12 WHEEL LOCKS OPERATION lt LOCKED POSITION BR UNLOCKED 3 POSITION c
16. pholstery Pull the existing back upholstery up and over the mounted back cane Install the NEW back upholstery over the mounted back cane Slide the loose back cane through the NEW back upholstery Secure the back cane to the wheelchair frame with the two 2 allen screws and locknuts Secure the NEW back upholstery to the back canes with the existing mounting screws and washers QSF 390 UM 1024404 REVO3 08 20 13 18 7 REPLACING UPHOLSTERY BACK UPHOLSTERY pasa Z BACK CANE WASHER Figure 8 Back Slide on Upholstery Stellato 8 Rear Wheel Adjustments WARNING After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened securely otherwise injury or damage may occur WARNING If changing the size of the rear wheel or a change in the seat to floor height is desired this procedure MUST be performed by a qualified technician QUICK RELEASE AXLES 1 Pushin the detent pin of the quick release axle with wheel and pull the axle out through the opening in the center of the rear wheel and axle spacer 2 Push in the detent pin of the quick release axle QSF 390 UM 1024404 REVO3 08 20 13 19 8 REAR WHEEL ADJUSTMENTS AXLE MOUNTING PLATE back position WHEELCHAIR FRAME AXLE MOUNTING PLATE front position QUICK RELEASE AXLE AXLE SPACER REAR AXLE THREADED BUSHING REAR WHEEL Figure 9 Rear Wheel Inst
17. r WHEEL LOCKS ARE NOT BRAKES DO NOT attempt to stop a moving wheelchair with wheel locks DO NOT tip the wheelchair without assistance DO NOT use an escalator to move a wheelchair between floors Serious bodily injury may occur Before attempting to transfer in and out of the wheelchair every precaution should be taken to reduce the gap distance Turn both casters parallel to the object you are transferring onto When transferring to and from the wheelchair ALWAYS ENGAGE BOTH WHEEL LOCKS gt DO NOT use parts accessories or adapters other than those authorized by Future Mobility Healthcare Inc Otherwise the warranty is void gt DO NOT attempt to lift the wheelchair by any removable detachable part Lifting by means of any removable detachable parts of a wheelchair may result in injury to the user and or assistant or damage to the wheelchair gt DO NOT stand on the frame of the wheelchair gt DO NOT use the footplate as a platform When getting in or out of the wheelchair make sure that the footplates are in the upward position v VVVVV QSF 390 UM 1024404 REV03 08 20 13 30 Stellato 14 WEIGHT TRAINING 14 Weight Training WARNING Future Mobility Healthcare Inc DOES NOT recommend the use of its wheelchairs as a weight training apparatus Future Mobility Healthcare Inc wheelchairs have NOT been designed or tested as a seat for any kind of weight training If occupant uses said wheelchair as a weight training
18. rest for clearance and transfer into the wheelchair 6 Swing footrest legrest in locked position to the 7 For folding the chair follow the above directions in reverse QSF 390 UM 1024404 REV03 08 20 13 21 9 UNFOLDING AND FOLDING THE WHEEL CHAIR Figure 11 Folding and Unfolding Chair push or pull to fold and unfold chair Stellato 10 Front Casters WARNING After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened securely otherwise injury or damage may occur INSTALLING REPLACING FRONT CASTERS AND FORKS Note This procedure can be performed if replacing the exact same size front caster 1 2 NOMS Remove dust cover Remove the locknut that secures the fork to the caster headtube Drop the front caster and fork out of the caster headtube Slide in the new six eight inch front caster and fork Reassemble by reversing STEPS 1 to 3 Repeat STEPS 1 to 5 for the opposite front caster To properly tighten caster journal system and guard against flutter perform the following check QSF 390 UM 1024404 REV03 08 20 13 22 Figure 12 Fork 10 FRONT CASTERS oop H H Stellato Tip back of wheelchair to floor b Pivot both forks and casters to top of their arc simultaneously c Let casters drop to bottom of arc wheels should swing once to one side then immediately rest in a straight downward po
19. sition d Adjust locknuts according to freedom of caster swing 8 Test wheelchair for maneuverability 9 Readjust locknuts if necessary and repeat STEPS 7 to 8 until correct 10 Snap dust cover over the locknut and stem Adjusting Front Caster Angle 1 Remove bolt and loosen locknut 2 Adjust cam plate for angle 3 Reinsert bolt tighten locknut QSF 390 UM 1024404 REVO3 08 20 13 23 10 FRONT CASTERS Figure 13 Plate Adjustable Angle Position 1 Position 2 Position 3 0 degrees 4 degrees 7 degrees Stellato 11 Anti Tippers WARNING After ANY adjustments repair or service and BEFORE use make sure all attaching hardware is tightened securely otherwise injury or damage may occur Installing Adjusting The Anti Tippers WARNING Anti tippers are specific to the different seat to floor angles and or seat to floor heights Refer to the chart in this section of the manual for correct usage and adjustment If these requirements CANNOT be achieved DO NOT us the wheelchair Contact a qualified technician If changing the seat to floor height with or without a change to seat to floor angle the correct anti tippers MUST be used to maintain a 1 to 2 ground clearance Seat to floor angle of O degrees to 3 degrees if so equipped anti tippers MUST be attached at all times In as QSF 390 UM 1024404 REVO3 08 20 13 24 11 ANTI TIPPERS Push butto
20. ver stand on the footplates during transfers in and out of the wheelchair e Ensure wheel locks are fully engaged while stopped on any incline decline and while patient is transferring to and from the wheelchair e Never tilt the wheelchair on two wheels without assistance When in any tilt or recline position this chair must be operated by an attendant e Never use the wheel locks to stop a moving wheelchair e Itis not recommended to transport users in vehicles of any kind while seated in the wheelchair Do not use any kind of wheelchair Tie Down restraints that are not approved by the FDA 570 REVO3 REV DATE 08 20 2013 5 Stellato Features SPECIFICATIONS SEAT WIDTHS 14 20 22 SEAT DEPTHS 15 20 CHAIR DEPTH Seat width 9 SEAT TO FLOOR HEIGHT Small frame 13 18 Large frame 15 19 REAR WHEELS 20 22 or 24 composite urethane CASTER SIZE 4 5 6 7 8 Urethane BACK HEIGHTS 19 22 Low 22 25 High BACK STYLE Slip on back upholstery ADJUSTABLE BACK ANGLE 5 0 7 14 21 ARM STYLES Full length adjustable T Style or Flip back FRONT RIGGINGS Pin Style swing away dual swing away elevating headrests WEIGHT CAPACITY 250lbs 114kg PRODUCT WEIGHT 31 lbs OVERALL DIMENSIONS 18 x 16 tilt 16 STF 570 REVO3 REV DATE 08 20 2013 6 1 GENERAL FEATURES FRAME COLORS Black or Silver Adjustment of caster hous
Download Pdf Manuals
Related Search