Home

User`s Manual(Eng)

1. AC adapter box Store the AC power adapters of the capture This illustration does not show the connection cords board and printer here See the Assembly and Setup Manual Stand This stand supports the captureboard See the Assembly and Setup Manual Depending on the product you have purchased the printer may be sold separately Effective Reading Size The area that can be copied is the gray area of the diagram Y A approx 5 mm e t might not be possible to print or copy when storing approx 10 mm approx 10 mm to USB memory or personal computer any portions lt gt that are drawn outside of this range Effective reading size approx 5 mm y Names of the Parts Input output terminals USB memory port type A Insert a commercially available USB memory device here Scanned images ee es can be saved See page E 17 The connector is located on the bottom sur face of the main unit The diagram view is seen from the bottom This illustration does not show the printer or connection cords DC input connector Connect this with the DC plug end of the AC power adapter See Page E 51 Only connect the supplied AC power adapter nothing else Personal computer PC dedicated USB port Typ
2. Prepare the printer See the previous page Print Setup e When turning on the power wait about 5 seconds or more after the power plug has been connected before pressing the ON Standby button Seroll Stop e Press the ON Standby button to switch on the power The LED of the display window will light e Turn on the captureboard s power before turning on the printer s power Press the Scroll Stop lt button and display the sheet sur face you want to print Scroll Stop Printer A press of the Scroll Stop button scrolls the sheet surface one screen portion left and automatically stops it To stop the operation part way through press the Scrol Stop 1 button again e The one screen that is visible is printable position e To fine adjust the sheet surface position with the sheet stopped move the sheet slowly by hand The sheet can be moved either to the left or to the right e Printing of the portion located around the sheet surface might not be possible Please see Effective reading size on Page E 5 Press the Number of Copies gm button and select the num ber of copies Number of Copies e 01 is selected when the power is turned on e Up to 10 copies can be specified and displayed on the display window e The number of copies increases by 1 each time the Number of Copies button is pressed and F is displayed after 10 this is used for test printing
3. bf a m T c i gt ec gt e a gt e a gt ea gt en m First 2 digits Last 2 digits Color Print B W Print F Christian year Month Day Hours Minutes 3 Set the setting mode s date and time When the Color Print E or B W Print button is pressed once the setting can Hr be made Use the Color Print E Increase and B W Print Z Decrease buttons to set sense 4 Press the Save button to enter the setting lll The captureboard switches to the next setting position Repeat steps 4 and 5 to set the current date and time e f the ON Standby button is pressed during steps 3 to 5 the partially made setting is canceled and the date and time return to the values set before the set ting was started On Standby 5 Complete the setting When the Save button is pressed after the minute s setting position c 6 display Status has been set the Time Setting is completed and the F1 display CB Setup reap Par pears Press the ON Standby button to return to the normal mode CF Preparations Connect the power plug to a wall power outlet AC 100 240 V Example Setting the date and time to 2 16 pm October 8 2011 l Press the ON Standby button to turn on the power fal The display window s LEDs light and the power turns on iil aL mode 2 Press the Number of Copies button while pressing the ON Standby button then release the ON Standby butto
4. e when the USB device is connected to a USB hub or when it is connected using an extension cable continued on next page AAAAAALAAA AAAAAAAAAS 444d Deleting USB memory image files with the com puter Before deleting important image files be sure to save them on the computer as a data backup 1 Open My Computer or Computer and then open the drive icon which shows USB memory The folder named CB_Image contains the memory stor age data of the captureboard 2 Place the CB_Image folder in the Recy cle Bin right click on the icon and select Empty Recycle Bin from the pull down menu All of the data contained in CB_Image will be deleted Tak e seach gt rads Fe Even when the entire folder is deleted a new CB_Image folder will be created automatically when USB memory is used again with the captureboard Gy Eres hte Hee 1X Dette this Poker ther places M conos Disconnect the USB memory The disconnecting procedure depends on the computer s operating system For details refer to the computer s operating instructions or help files 1 Click the Hardware Removal 5 icon that is displayed in the task tray Click Stop USB Mass storage Device drive E The E drive character will differ depending on the personal com puter system Remove hardware icon example
5. LEDs flash in circular motion during saving in memory for computer stor age Di splay window e One sheet s worth of the screen is scanned scrolled and storing in the memory for computer storage starts once scrolling stops The LEDs on the display window flash in a circular motion during saving in the memory for computer storage continued on next page E 21 Using the captureboard connected to a computer _ On the computer open My Computer and from there open the captureboard identified as a removable device 1 2 3 Double click the My Computer or Computer icon to open it When the device icon for the captureboard displayed as a C 20 is double clicked the captureboard s internal memory opens The CBlmage file is the scanned image file jog png or pdf according to setting e The setup folder contains the simple network settings file Copy the CBlmage file to My Documents etc on the computer jpg png or pdf according to setting To disconnect the USB cable follow the procedure in step 3 on page E 20 ots Pe ie ten me 1o S Ea Ee hates Fy cain Sytem Tanin ik earn wet istan Removable oC Deemer DOr og ssm E 22 Using the Captureboard Connected to a Network When connecting to the network the fir
6. button y A 5 second flashing FL display indicates that there is insufficient free capacity to permit storage in USB memory Replace with a USB memory device having sufficient capacity y See Meaning of Error Messages on Page E 46 for other error displays Depending on the USB memory it may take time for recognition or it may take time for saving When the ON Standby button is pressed during the reading operation the reading operation will be discontin ued and the partially read image data will be stored in the USB memory To move the sheet surface wait until scrolling stops then press the Scroll Stop 4 button The date and time of the saved file will reflect the captureboard time setting See CB Setup on Page E 31 When a certain amount of free capacity is not available in the USB memory FL will be displayed when the Save button is pressed Delete data set the sheet surface back to the original status then press the Save button again When the captureboard and a computer are connected by USB cable the data is stored in the main unit s internal memory Removing the USB memory Check that the flashing rotation of the display window has changed to steady lighting and that the USB memory access indicator is not flashing then pull the USB memory straight out Please see your USB memory manual for details e Do not unplug the USB memory device during the USB memory stor age operation i e
7. CB Setup and Network Setting Procedure There are three ways to make the device settings using the captureboard s operation buttons to make the set tings CB Setup making the settings using a USB connection simple network settings and making the set tings via LAN detailed settings CB Setup and Network Setting CB Setup operating the captureboard s buttons Basic setting operation e Check that the power is on that the display window is lit e When in the CB Setup mode the captureboard will return to the normal mode if no buttons are operated for 10 seconds so operate the buttons within 10 seconds 7 Switch to the CB Setup mode While pressing the ON Standby button press CB Setup mode the Number of Copies button then release the ON Standby button The captureboard switches to the CB Setup mode Print Setup F1 appears on the display window On Standby mberot Copies F1 is the time setting For instructions on the time setting see page E 12 Color Print B W Print 2 Select the function number then i Number of Copies press the Save button I gt Fe gt gt FH Press the Number of Copies button the function switches each time the button is il pressed returning to F1 after FA to select the Scroll Stop desired function number then press the Save amp Number of Copies button to set that function number m For the ite
8. during the rotating flashing display in the display window or while the access indicator of the USB memory device is flashing because data will be destroyed When the captureboard is not going to be used press the ON Standby button and switch off the power standby mode On Standby A5 e I Gh letters appearing at one second intervals in a moving display in the display window indicate that a USB memory device is mounted Unplugging the USB memory device will switch off the power A function that serves as a reminder to unplug the USB memory device e When the captureboard and a computer are connected by USB cable the auto power off function which turns the power off automatically is canceled e Scanned image files stored in the memory for computer storage are deleted when the ON Standby button is turned off Files in the memory for network storage are not deleted E 18 Using USB Memory Saving Image Files on a Computer Deleting Image Files Examples of operations follow for saving the image files in the USB memory device to the hard disk of the per sonal computer and for deleting the folder when the USB memory capacity is full There are various methods that can be used for saving and deleting including the use of Explorer See the instruction manual of your per sonal computer or the software that you are using for information about using a personal computer The name of the folder on the US
9. see page E 49 When the button is pressed again the display switches to 01 The number switches continuously if the button is held in e After setting the number of copies proceed to step 4 within 1 minute The number of copies is reset to 01 if no operation is performed within 1 minute continued on next page E 15 Printing Press the Color Print amp or the B W Print J button to print Color Print B W Print ES or e The reading operation is performed for a one sheet portion while the sheet is scrolled and the printing operation is performed Cancellation of the print operation in progress When the ON Standby button is pressed the reading of the sheet stops and the partially read image data is printed Wait until the sheet is expelled from the printer e f the ON Standby button is pressed while the sheet surface is being read printing is interrupted and only part of the image will be printed To move the sheet surface wait until scrolling stops then press the Scroll Stop 1 button e The one screen portion is reduced to A4 paper size and printed For wide type captureboards model C 20W the image is compressed about 75 in the horizontal direction To print with the same proportions as the image on the sheet surface see Making the Device Settings page E 31 e A flashing E in the display window indicates a print error See Meaning of Error Messages on Page
10. this company will not be responsible for any claims of loss or profit or other matters deemed to be the result of using this unit 5 The use of a printer as the peripheral device of the PLUS Captureboard is taken to be a prerequisite therefore operation will not be guaranteed when the printer is used with a direct connection to a personal computer 6 Manuals with incorrect collating or missing pages will be replaced E 2 Table of Contents MINTO CU CTION cs ccsceseseshcccesevnecessectssenccstsacecrssscescrensevaces E 2 Package Content c cscssesccesesseseeeeesssseeeeesessenes E 4 Names Of the Parts sssssssssssssssssssesscesesssesssseesess E 5 Frota tvciiwosd camila racer ects E 5 Input output terMinals nennen anniari E 6 Changing the Height of the Unit cece E 7 CONTOL PANE nriman E 8 Functions of the Captureboard csscssssssseeeees E 9 Basic Functions E 9 Network FUNCTIONS oisein E 9 Functions specific to the captureboard n E 9 Operation Steps ssssssssssusnnnnununnnnnnnnnnnnnnununununnnnnnnnnn E 10 When used aS a Copyboard cescseeseeseeeeeeeeees E 10 When used as a Captureb0ard cccseseeeeeeees E 11 Setting the ThMGC cscsscccscscssecesesesseeeeesesseseeesess E 12 Printing printer sold separately 0seee E 14 Preparing the PRIMED sicceiascelvcisisciedisieweveieasaesediieneds E 14 Basic Printing Operation E 15 Moving the sheet surface manually 000 E
11. 16 Using USB Memory sccecsssessesesessessneeeeeeenees E 17 USB Memory Storage Procedure s E 17 Saving Image Files on a Computer Deleting Image FIGS seat A tne tues ae E A twang E 1 Using the captureboard connected to a computer E 21 Using the Captureboard Connected to a Network E 23 Saving scanned images on the captureboard or E E E 23 Transferring image files to deleting them from the COMPUTER is aciviccavacsaveanetarovasteunaedrans A AA E 25 When the folder for saving is set to Board E 25 Deleting image files from the captureboard E 27 When the folder for saving is set to FTP GIVEN css tess svetdctenauee evetacel aaa aa E 28 Deleting image files on the FTP server E 29 CB Setup and Network Setting Procedure E 30 CB Setup operating the captureboard s buttons E 30 Basic setting Operation cccceeeeeeeeee E 30 Table of Function Numbers and Settings E 31 Simple Network Settings via USB E 33 Making Detailed Settings via LAN E 35 Basic Setting Operations E 35 CBSO LUD ess sinirinin E 38 Heacler FOOter cccceceeceseseteteeseeteeeeeeiees E 39 Network Setting c cece E 40 User SEUNG iscicsidtvscrensdesecsensanictnetesssetcenansaasces E 41 SECUN SEMINO iso aradin E 42 Disk management Setting E 43 CB INfOrmation ecececseeeeceeeteesetsteteeseeeees E 43 Resetting the Network Settings ccee E 44 Creating an
12. 2 When the USB mass storage device can be safely removed screen is displayed click the display 3 Click X to close This allows the USB memory device to be unplugged from the computer LD Safe To Remove Hardware The USB Mass Storage Device device can now be safely removed from the system e Do not disconnect the USB memory device while the USB memory device s access indicator is flashing Doing BO d 5 01PM so will damage the data e The USB drive may not be disconnected properly for example if the computer is in the process of checking the status of peripherals E 20 Using the captureboard connected to a computer _ When the captureboard and a computer are connected by USB cable the captureboard is recognized as an external memory device removable device Below is the procedure for copying the CBlmage file from this dev ice onto the computer Images can be stored in JPEG jpg PNG png or PDF pdf format selectable in the captureboard settings CB Setup See pages E 31 E 38 The factory default is JPEG With this function if the operation for disconnecting the USB connection between the capture A CAUTION board and computer is performed or the captureboard s power is turned off the image data in the captureboard s computer storage memory is deleted Be sure to save important image data on the computer etc Only one screen s worth of
13. Setup Manual Upper wall brackets 2 Lower wall brackets 2 Main unit fixing screws M4 x 12 2 Sold separately for some products USB cable type B lt type A 1 PLUS code 715258900 Cable for connecting the main unit to a computer Used for making the device settings e Do not use this cable for connection to the printer sold separately CD ROM 1 Includes the User s Manual this manual Software Operation Manual in PDF format and this unit s dedicated software PLUS C 20 Software User s manual in PDF format Includes instructions on using the set Software Operation Manual in PDF format This contains instructions for combining the captureboard and computer screens using the PLUS C 20 Software Documents Important Safety Information 1 Includes instructions to be heeded in order to use the set safely Assembly and Setup Manual Includes instructions on installing the set and connecting it with the printer sold separately Names of the Parts Front Main unit Frame cover OU Sheet Dedicated markers are used on the sheet to draw diagrams and to write Control panel See Page E 8 I input output terminals Pen tray see next page Located on the bottom surface Printer table The printer is placed here See the Assembly and Setup Manual i 2 ad The printer is sold separately
14. USB LIL memory has been forgotten E g Reading error 1 ON Standby button l l Turns the captureboard s power on and off standby mgm System error Flashing red Flashing red mode E H Time setting error 2 Display window The number of copies operating status and error mes sages are displayed on the 7 segment LEDs 3 Number of Copies Test print button Press this button to set the number of copies to be printed max 10 The number of copies is displayed on the display window PB is displayed during test printing FTP server connection failure Off Off 4 Color Print button The sheet is moved by 1 screen and read and the image is printed in color in the number of copies indicated on the display window 5 B W Print button The sheet is moved by 1 screen and read and the image Security protection Color printed prohibited LAN cable disconnected FTP server recognition error FTP server writing failure I Network or other error Network setting reset error Header footer writing error is printed in black and white in the number of copies indi cated on the display window The letters USB scroll on the display E 8 Basic Functions Printing pre evices Storing on USB memory device Output to paper Network Functions D Viewing images stored on the captureboard vi
15. cases they are related to the network system so consult the network administrator If the problem persists it may be due to a captureboard malfunction Con tact your store of purchase E 47 Troubleshooting Please check the following matters before making a request for servicing Condition Please Check Captureboard Related Pressing the ON Standby button does not switch on the power Check whether the cable of the AC power adapter is disconnected from the DC connector of the Captureboard or the wall outlet Unplug the AC power cable from the outlet wait several seconds and then plug it back into the outlet again Writing on the sheet is not erased with the eraser Was a marker other than a dedicated marker used Parts of characters and lines are not dis played on printouts or in image data Blurred characters and thin lines may not be displayed on printouts or in image data Scanned copy image is dirty Erase Reminder function is activated even when sheet is erased with the eraser Is there marker residue or substantial quantities of refuse on the sheet If the sheet is dirty moisten a soft cloth with water wring well then wipe the sheet in a stroking manner When the captureboard and PC are con nected the PC does not recognize the captureboard Check whether the captureboard is in an operable condition and whether the USB cable is connected properly Is the captu
16. images are stored See Network Settings on page E 40 The image files are saved in JPEG default PNG or PDF format according to the image format setting See CB Setup on pages E 31 E 38 The information below must be input to transfer the files If you do not know this information ask your company s network administrator Log in to the folder for saving meaning connect to the communications path IP address of the captureboard or FTP server Verification screen If the folder for saving is set to Board User name and password registered at User Setting If the folder for saving is set to FTP Server User name and password registered on the FTP server When the folder for saving is set to Board The scanned images are saved on the captureboard These images are downloaded transferred onto the computer connected on the network Downloading is possible even when the captureboard is in the standby mode but not if the captureboard s power is not connected to a power outlet Launch the web browser on the computer and log into the captureboard Input the captureboara s IP address then press the Enter key e Upon shipment from the factory and when set to the defaults the captureboard s IP address has not been set so logging in is not possible The top menu is displayed Click Board File List on the menu The verification screen opens e No pass
17. images for printing or display The date and time are printed at the top right of the header Creating header and footer images Use your image software to create a JPEG file Create the image with the resolutions below Max size for header images 1248 x 110 dots Image format JPEG Max size for footer images 1248 x 40 dots Image format JPEG This is sometimes expressed as pixels e Even for image data whose resolution is within the allowable limits it may happen that the top and bottom of the image are not displayed Image display position Images are displayed at roughly the center in the horizontal direction In the vertical direction they are positioned next to the scanned image area Consider this when creating images with less than the maximum size Suggestions on creating images Scan the logo data with an image scanner save this on the computer as image data then crop or reduce its size to fit within the specified resolution and save this new data Use Windows Paint etc to paste images input characters etc to create the image When saving save in JPEG format with a size within the maximum size Registering created images on the capture board Example Here we explain how to register a header image Use Oo the same procedure to register footer images oo 4 fos 1 Open the Header Footer screen at Detailed Settings via PLUS Captureboard C 20 Laas Ea LA
18. of the captureboard e Check the side polarity of the USB mem ory device before inserting it Forcing it in the reverse orientation will damage the USB A Memory port or USB memory device e Be careful not to bump into the USB memory device with hand or body while On Standb it is mounted Doing so could damage the r A USB memory device or USB A Memory ie gt ee Scroll Stop alli Printer Press the Scroll Stop lt button and display the sheet sur face you want to store ee Scroll Stop Ss lt USBB USBA PC MEMORY Si The procedure for displaying the sheet surface you want to store is the same as for printing See Basic Printing Operation on page E 15 e The one screen portion that is viewable will be saved in USB memory e Saving of the portion located around the sheet surface might not be pos sible Please see Effective reading size on Page E 5 continued on next page E 17 Using USB Memory Press the Save button to store Flashing indicator rotates sequentially during USB memory storage operation Display window Save e The reading operation is performed for a one sheet portion while the sheet is scrolled and USB memory storage starts after the scrolling completes The 5 second flashing US display indicates that the USB memory has not been inserted Please insert the USB memory and then press the Save
19. the above settings changes are sent to the captureboard overwriting previous settings Once overwriting is completed the CB Setup page switches to the Setup is completed character display E 38 CB Setup and Network Setting Procedure Header Footer This is the screen for registering headers and footers on the captureboard and checking the image For instructions on displaying the screen see Basic Setting Operations step 3 on page E 36 Jo TE reao elx r E eroare Talk er e E d Fevorites captureboard c 20 Language English PLUS Captureboard C 20 Image Select screen Preview screen Image Select Preview Item Setting Description Default Select Header Footer Select whether the image to be registered on the captureboard is a Header Image header or footer Click the radio buttons to select e For instructions on creating images see page E 45 Browse When the Browse button is clicked the computer s Browse Files screen opens Select the image then click the OK button to set it Upload This uploads the selected header or footer image to the captureboard When the Upload button is clicked uploading starts e f an image is already registered on the captureboard that image is overwritten Preview This displays a preview of the header or footer image reg
20. 716174133 E 20110720162559 Mes i 20110720_165503jpg 20110720_170029 jpg amp Local Disk D cj local ise F 20110726115005 pdf l 20110726 115214 pdf S connaws ibe iiit be i 1 21 items Close the Explorer window GOK E gt Temere 942363 deme Sole Click the close button X on the Explorer window to close Explorer p ives I E ooo E oomo f 20110711170344 jpg 201711 170735 pq S 20110711 191336 PP cort0711 192917 j omnis 1741 ine 30110700 16355 inn E 28 Using the Captureboard Connected to a Network e Logging in to the FTP server from a web browser The procedure is the same as for When the folder for saving is set to Board on page E 25 However to log in input the FTP server s IP address input ftp then input the IP address and at the verification screen input the user name and password registered on the FTP server Deleting image files on the FTP server At step 4 on the previous page select the folder s or image file s to be deleted right click the mouse to display a pull down menu and select Delete At the verification screen click Yes The folder s or file s are deleted If folder s or file s cannot be deleted e Is access to the FTP server s folder restricted e Be very careful when deleting folders or files from the FTP server e Check again before deleting to avoid accidentally deleting other folders or files E 29
21. B memory device is CB_Image Image files are stored in this folder By factory setting upon purchase image files are named PV xxx jpg JPEG files where xxx refers to a 3 digit number starting from 001 ex PV 001 jpg Images can be stored in JPEG PNG or PDF format selectable in the captureboard settings CB Setup See pages E 31 E 38 Plug the USB memory device into a USB port of the personal computer When connecting to the personal computer for the first time the installation of a USB driver is required Follow the instructions manual of the USB memory device that you are using e Usually with Windows XP Windows Vista Windows 7 the standard driver is installed automatically and the capture board is identified as Removable disk in My Computer or Computer Saving the image files of a USB memory device to a personal computer 1 Open My Computer or Computer and from within open the drive of the connected USB memory device The folder named CB_Image is the saved data of the captureboard Store the CB_Image folder in My Docu ments or another location All of the data contained in CB_Image will be stored Depending on the computer s usage environment these operations may not work properly This could be the case for example e when several USB devices are connected simultaneously to the computer
22. Default Gateway Any value Blank Save the setting ini settings file overwriting the previous file Save to location setup folder on captureboard removable disk File name setting ini We recommend making a note of changed settings for future refer ence Once overwriting is completed the captureboard reboots automatically Perform the USB disconnection procedure on the computer see step 3 on page E 20 then disconnect the USB cable Check the connection 1 2 Connect the captureboard to the LAN port on a switching hub etc Launch a web browser ex Internet Explorer on a computer con nected to network In the address field input http followed by the IP address that was set then press the Enter key If the captureboard s top screen opens the captureboard has been correctly connected to network If the captureboard s top screen does not open This could be due to one of the following Have you made a mistake inputting the IP address that was set Is the captureboard s LAN terminal properly connected to a LAN port on the network Is the IP address that was set being used by another device If multiple units of this captureboard are connected are they con nected to the network with the same IP address Is the IP address that was set within the automatic acquisition range of the DHCP of the router etc When using a proxy server add the captureboard s IP addr
23. E 46 e When printing a time stamp date and time is printed at the top right of the sheet See CB Setup on page E 30 E 38 When the captureboard is not going to be used press the ON Standby 5 button and switch off the power standby mode On Standby e Switch off the printer power e When the Erase Reminder function is set to Enable When the ON Standby button is pressed the display window and all the indicators flash simultaneously the sheet automatically moves to the surface that is not yet erased and the power turns off To set the Erase Reminder function to Disable see page E 32 E 38 The Erase Reminder function may not work properly due to dirt on the sheet s adhesive sec tions or marker residue e f no button is operated within 30 minutes the power turns off automatically auto power off When the power is turned off scanned images stored in the unit s internal memory are cleared e The auto power off function is canceled when the captureboard and computer are connected by USB cable Moving the sheet surface manually The sheet can be moved even when the power of the captureboard is switched off The sheet can be moved with your hand either in left or right Please place your hand at the vertical center and move the sheet slowly e Quick movement can cause damage to the drive mechanism of the captureboard e When the Erase Reminder function is set to Ena
24. Get Current Tima YM DD MNINEYY MMDD Captureboard Setting Item Setting Description Default Paper size Select the printing paper size A4 Aspect Ratio Setting Select the aspect ratio for printing Match to printing paper size Time Date Stamp Set the captureboard s date and time Input as follows Year 4 digits Month 2 digits Ex 03 for March Day 2 digits Ex 06 for the 6th Hours 2 digits in 24 hour mode Ex 14 for 2 pm 06 for 6 am Minutes 2 digits Ex 00 for O minutes e Do not insert spaces If the date and time setting values are incorrect an error message is displayed Get Current Time When the Get Current Time button is clicked the display switches to the computer s current time This eliminates the need to make the cur rent date and time setting printer the computer Color Printing Color printing can be set to Valid or Invalid Valid Resolution Select the resolution at which scanned images are saved Standard Graphics File Format Select the format in which scanned images are saved JPEG Header Footer Set whether or not to output the header footer information registered on Disable Off the captureboard Erase Reminder Set the erase reminder function Disable Print from captureboard Enables printing from the printer connected to the captureboard using Disable Setup When the Setup button is clicked
25. N See page E 35 2 Header Footer Image Select e When a preview is selected click Image Select on the submenu Click the Header radio button 3 Select the header image you have created Click the Browse button to display the computer s Browse Files screen Select the image file to be registered as the header then click the OK button The file name is displayed 4 Click the Upload button to upload the image to the cap tureboard When uploading is completed Completed successfully is displayed At this time HF flashes on the captureboard s display win dow for 5 seconds after which it stops flashing remaining lit If Data size is too large is displayed the image cannot be registered Close the web browser then adjust the image file s size O Head e When headers or footers are registered the header footer function is set to Enable Click Preview to check the registered image This completes registration Close the web browser PLUS cap tureb oard C20 indin Meaning of Error Messages If any of the following flashing indications appear in the display window of the control panel please check the matters described below Error messages flash for 5 seconds then stop flashing remaining lit Captureboard main unit related errors c 20 Po an in Print Setup Er
26. PLUS Captureboard C 20S C 20W User s Manual Thank you for your purchase of the PLUS Captureboard Please read this User s Manual carefully before use to take full advan tage of the functions of this product After you have finished reading the manual please keep it for future reference Introduction This manual is for both the C 20S and C 20W models The captureboards come in two sizes standard size model C 20S and wide size model C 20W The descriptions and diagrams in this manual refer to the model C 20S When functions or operations are specific to a certain model of captureboard the model name is speci fied Cautions on using networks About the network connection environment e The required operating environment is subject to change without notice Also PLUS does not guarantee all operations e Even if all required operating environment conditions are met it may happen that operations do not work properly or that some problems arise Depending on the communications status displays may be delayed and communication errors may occur Disclaimer e PLUS will accept no responsibility whatsoever for any consequences of problems of communication impediments in con nected devices due to the network functions e PLUS will accept no responsibility whatsoever for impediments incidental to usage of or the inability to use the network func tions loss of business profits losses due to in
27. a a network Viewing of images stored on the captureboard Panoan oe apurnar ED Storing on USB memory Capturing images on a com Storing of image on computer 6 Viewing images stored on an FTP server via a network Viewing of images stored on FTP server Functions specific to the captureboard Combining images projected from a projec tor with hand drawn data Projector PLUS ENRE WYO R otg Scanning with the C 20 Software Combining of image on computer with board s hand drawn data D Printing computer data on printer connect ed to board C 20 Software s preview screen Printing of combined image on computer from printer connected to captureboard e For details on operating the PLUS C 20 Software and on connecting the equipment see the separate Software Opera tion Manual rrr P When used as a Copyboard The captureboard uses an image scanner to scan characters or diagrams drawn using special markers four colors When the Color Print or B W Print I button is pressed the image on the screen is printed out to the printer When a USB memory device or computer is connected the image on the screen is saved as image data when the Save button is pressed For the memory for computer storage one sheet s worth of data is saved overwriting previously saved data Furthermore when network settings are m
28. ade image files can be saved on the captureboard or FTP server Preparation e Set up the newly purchased captureboard and connect a printer See a separate manual titled Assembly and Setup Manual e Plug the AC power plugs of the captureboard and printer into wall power outlets e After purchase be sure to set the captureboard s clock If not the proper date and time will not be displayed on pri nts or in image files See page E 12 Draw on the Sheet Surface Please draw with the dedicated markers that have been sup plied If anything other than the dedicated markers or eraser are Saving to USB Memory 1 Press the ON Standby button of the captureboard to switch on the power D used it may be impossible to erase the sheet or the sheet 2 Insert USB memory into the Memory lt port USB could get dirty A port of the captureboard To move the sheet manually see Moving the sheet surface 3 Press the Save button manually on page E 16 Pri nting See Using USB Memory on Page E 17 Saving on a computer Press the captureboard s ON Standby button to turn the power on 1 Set A4 or letter size paper 2 Connect the captureboard to the computer using the Do not set anything other PC dedicated USB port than A4 or letter size paper 3 Press the Save button 2 Press the ON Standby 4 The image is saved on the computer button of the captureboard and switch on
29. ame way as you would FTP Password on a computer e The characters that can be input are restricted according to the item s type of setting Gee page E 41 Browse and Upload buttons See Header Footer Page E 39 On O Off Setup button When clicked the settings changes are sent to the captureboard Setup overwriting previous settings Once overwriting is completed the CB Setup page switches to the Setup is completed character display QO Bomans 4 to 5 a PLUS Captureboard C 20 bE e f the IP address in the network settings etc has been changed the captureboard reboots See page E 40 After making settings or changes be sure to click the Setup button to overwrite the previous settings on the captureboard Close the web browser Click the web browser s close button X to close it Bes P LU S Captureboard C 20 ina E E 37 CB Setup and Network Setting Procedure CB Setup This is the page where the captureboard s various functions are set and changed The settings are the same as on Table of Func tion Numbers and Settings in the section on making the settings operating the captureboard s buttons For instructions on dis playing the screen see Basic Setting Operations step 3 on page E 36 4 x 0 cm PLUS Captureboard C 20 Orginal Match
30. aptureboard to the network be sure to consult the network administrator before making the set tings e Depending on the network being used the display speed and button response may be slow and operations may not be performed If this happens consult your network administrator Also the captureboard may not respond if buttons are operated successively In this case wait awhile then operate again If there is no response after a while turn off the capture board s power then turn the power back on If the top screen does not display with a web browser press the Ctrl F5 keys to refresh the web browser s screen The captureboard uses JavaScript and cookies Set the web browser so that these functions will operate The captureboard performs automatic page reading redirecting Set the web browser so that this function will operate Basic Setting Operations Here we explain how to display and close the settings screens using the Internet Explorer web browser as an example Preparations 1 Use a LAN cable to connect the captureboard s LAN terminal to the LAN port on the switching hub 2 Turn on the captureboard s power Launch the web browser on the computer con nected to the network Page cannot be displayed may in some cases appear but simply continue to the next step continued on next page E 35 CB Setup and Network Setting Procedure Input the captureboard s IP address In the we
31. b browser s URL field input http followed by the cap tureboard s IP address then press the Enter key When the captureboard is connected the top screen appears Connecting the captureboard to the network upon purchase Upon purchase the captureboard s IP address and subnet mask are not yet set Be sure to check the section Simple Network Settings via USB See page E 33 and set the IP address etc ay teetieteseneeeseeeneny ina ER From the menu click the desired setting item When setting items for which verification are required are clicked the user verification screen is displayed Input the user name and password then click the OK button e No password is set upon purchase For the user name input admin then click the OK button e At the user verification screen the administrator s user name and administrator s password can also be used for verification Once verification is validated the desired page is displayed See the respective pages in this manual for explanations CB Setup page E 38 Board File List page E 25 Header Footer page E 39 Administrator Menu CB Information page E 43 Click Administrator Menu to change the settings below The menu can be accessed with administrator authority Network Setting page E 40 User Setting page E 41 Security Setting page E 42 Disk management Setting page E 43 1 Click Administrator Menu The administrator verif
32. ble the Erase Reminder function may not operate properly if the sheet surface is moved by hand E 16 Using USB Memory The content of what has been drawn on the sheet surface of the captureboard can be saved in USB memory Later the saved image can be read into a personal computer and made into a document of the proceedings of the meeting or affixed to a document e No USB flash memory device is included When purchasing a USB flash memory device pay attention to the following 1 USB flash memory devices formatted in FAT16 FAT32 are supported USB flash memory devices in NTFS format cannot be used 2 USB flash memory devices protected by a security function cannot be used 3 USB flash memory devices with a capacity of over 32 GB cannot be used 4 If the USB flash memory device is divided into multiple partitions only one partition can be recognized with this unit USB Memory Storage Procedure Preparation Check that the captureboard s AC power plug is connected to a wall power outlet Press the ON Standby button and switch on the power On Standby EB O e When turning on the power wait about 5 seconds or more after the power plug has been connected before pressing the ON Standby button e Press the ON Standby button to switch on the power The LED of the display window will light Print Setup Number of Copies P Insert the USB memory device into the USB A Memory lt gt port
33. c c Off m Lit Disable The Erase Reminder function does not work Setting upon factory shipment Enable When the ON Standby button is pressed to FH Erase Reminder turn the power off the display window on the captureboard s operation panel flashes and the captureboard automatically moves to the non erased surface after which the power turns off e The Erase Reminder function may not work prop erly due to dirt on the sheet adhesive or marker traces Selection of the format in which the date and time are YYYY M D USB Printer displayed m Lit Off f Examples of displays DD MMM USB Printer Time Day Stamp E g Format YYYY M D 2011 1 23 01 23 YYYY Off Lit DD MMM YYYY 23 Jan 2011 01 23 MMM DD USB Printer MMM DD YYYY Jan 23 2011 01 23 yYYY m Lit m Lit Printing is possible from the printer connected to the Disable USB Printer captureboard using the computer m Lit c Off Disable Setting for disabling printing from the com Enable USB Printer ER Print from cap puter e Off Lit tureboard printer Enable Setting for enabling printing from the com puter Reset Device Set FF tings This restores the captureboard device settings at F2 to F9 to their defaults settings upon factory ship ment The settings marked are the defaults 1 Select FA then press the Save button FA is displayed with the dot lit 2 Press the Save button again The se
34. d Registering Headers and Footers E 45 Meaning of Error Messages ssssessseseenaes E 46 Troubleshooting s sssssssssnsunsnnunsnnunnnnunnnnunnnnnnnnnnnnnna E 48 SDGCIIGATIONS sssisssssesenscedestaccsasscserecsstnecedsatersertcneesexe E 50 PAD QIN sacs iscts caseeeszectsascectscasesstecesanersasevserczsesneyotiecs E 51 Connections and Wiring Diagram s E 51 Meaning of the Terms Used in this Manual Main unit or set This refers to the captureboard USB memory refers to USB flash memory copy Both print and USB memory saving mean to co Sheet surface refer to the drawing portion Scroll or move indicates feeding of the sheet py Memory for network storage Memory used for network storage Network The communications network on which devices are interconnected in net fashion for communication exchange of USB memory storage means the saving of sheet surface data using MEMORY i e the USB port of the operation panel Memory for computer storage indicates a temporary saving location of the image that has been read data between the devices For this captureboard the network indicates the LAN below pany E 3 LAN Local Area Network A closed communications network for communicating within a restricted area such as within a com FTP File Transfer Protocol The protocol communications rules used when transferring files on a TCP IP network Package Co
35. data can be stored in the captureboard s memory for computer storage When the captureboard s save operation is performed successively previous data is overwritten Do not store computer data in the captureboard s memory for computer storage The memory for computer storage cannot be formatted from a computer Do not disconnect the USB cable or access the captureboard while data is being saved after pressing the captureboard s Save button Doing so will cause the computer s operation to become unstable Do not press operation buttons on the captureboard while the captureboard s memory for computer storage is being accessed from the computer Doing so will result in increased time for response between the computer and captureboard and operations may not be possible When connected to a Macintosh computer the warning message The disk was not ejected properly is displayed but the data can be stored normally in the computer s memory Turn on the captureboard s power and connect the PC dedicated USB port type B and computer using the USB cable e Usually with Windows XP Windows Vista Windows 7 the standard driver is installed automatically and the capture board is identified by the computer as a removable device USB cable included with captureboard To USB port on computer To captureboard s computer USB port type B Press the Save button to store Save
36. disk can be checked and the disk can be formatted here For instructions on displaying the screen see Basic Setting Operations step 3 on page E 36 Disk Management Setting Setting Description Default Item Disk Usage This displays the amount of network storage memory used in percent age Disk Check When the Disk Check button is clicked checking of the network stor age memory starts When checking is completed the results of the check are displayed If a warning is displayed format the disk Disk Format When the Disk Format button is clicked the disk is formatted E Notice e Transfer important image files to a computer before formatting CB Information This displays the contents of the detailed settings made on the captureboard and the captureboard s firmware version Note that the passwords are not displayed For instructions on displaying the screen see Basic Setting Operations step 3 on page E 36 CB Setup and Network Setting Procedure Resetting the Network Settings Operate the buttons on the captureboard to reset the network settings to their defaults Setting items that are reset Admin User name Admin Password User Name Password IP Address Subnet Mask Default Gate way Folder for saving FTP User Name FTP Password FTP Server IP Address FTP Server Port FTP Sa
37. e B Connect this with the USB port type A of the PC Used to connect the captureboard to a computer to make the captureboard s device settings Can also be used to copy scanned images onto the computer See page E 21 E 33 LAN terminal RJ 45 Connect to a LAN port on the network switching hub etc using a commercially available LAN cable Printer connector USB port Type A Connect this with the USB connector of the printer See Page E 51 The printer connector is dedicated for use with a printer use it only with a printer Locking unlocking the stand s casters After installation lock the casters with the stoppers When mov ing the stand unlock the caster s stoppers The stoppers are locked when the bottom is pressed Press the top to unlock them Unlock Lock Caster Names of the Parts Changing the Height of the Unit This is the height adjustment when setting up the captureboard on the optional stand The stand height can be adjusted to 3 levels by 100 mm ra Z CAUTION e At least two persons should hold the main unit If not the main unit could drop or tip resulting in accidental injury Lock the stand s casters by pressing the bottom of the caster lock button If not the stand could move while the main unit is being mounted or removed resulting in accidental injury After unplugging the power cord from the wall power outlet disconnect all the connection cords from t
38. e When turning on the power after the power plug has been connected or the power has been turned off set to the standby mode wait about 5 Color Print B W Print seconds or more before pressing the ON Standby button e When the ON Standby button is pressed and the power turns on the dis play window s LEDs light Scroll Stop dill Press the Scroll Stop T button to display the image you want to save Scroll Stop On Standby The procedure for displaying the sheet surface to be save is the same as for the printing operation ES sinter See Basic Printing Operation on page E 15 e When saving the visible image one screen s worth is saved on the cap tureboard or FTP server e When Board network storage memory is selected as the save to loca tion approximately 100 image files can be saved e t may not be possible to save the edges of the sheet surface See About the scanning tolerance range on page E 5 continued on next page E 23 Using the Captureboard Connected to a Network Press the Network amp button to save the image Network f LEDs flash in circular motion during saving pi Display window e The scanning operation scrolling is performed over one sheet s worth of image and when scanning stops the data is stored in the save to location set in the network settings For instructions on selecting the save to location see Network Settings o
39. eboard a device displayed as a removable disk to open the captureboard s computer storage memory e To check that the captureboard is operating as a device right click My Computer or Computer to display the menu then check that PLUS Captureboard USB Device is displayed as the disk drive name at Management gt Device Manager for Windows 7 Properties gt Device Manager for Windows XP Use a program on the computer Notepad etc to open the setting ini file in the setup folder 1 Double click the setup folder to open it 2 Open the setting ini file text format located in this folder using Notepad or another program on the computer and directly overwrite the contents of the settings file e The only characters that can be input are numbers and periods Do not insert any spaces If so the file will be identified as corrupt when the captureboard is started and the settings will be reset to the defaults continued on next page E 33 CB Setup and Network Setting Procedure Contents upon purchase and when network settings are reset IP Addressa CO wsssnsessesensecenssecennes Input the IP address fixed Subnet Mask sessiinisssesiss Input the subnet mask Default Gateway veer Input the default gateway if necessary Item Item name Setting Default IP address IP Address Any value Blank Subnet mask Subnet Mask Any value Blank Default gateway
40. es and printers that have been verified to be operation many differ from the ones shown on the connections diagram they may be of the built in or mounted on type e When Print from captureboard printer in the captureboard s device settings CB Setup is set to Enable When the computer and captureboard are connected you are asked to install the printer driver Use the CD ROM included with the printer etc to install the printer driver on the computer E 51 PLUS Corporation ISO 14001 certification 2011 PLUS Corporation 26 4644 11B
41. ess to the Exceptions in the proxy s settings to set so that the proxy is not used E 34 CB Setup and Network Setting Procedure Making Detailed Settings via LAN Use this procedure to make the captureboard device settings CB Setup network settings etc with the captureboard con nected to a local area network hereafter referred to as LAN or the network using a computer s web browser Access authority is required to make the detailed settings There are three levels of authority administrator authority file list browsing authority and no authority and the selectable menu items some setting items are restricted accordingly Register the administrator and users at User Setting on page E 41 Table of Menu Items and Access Authority Levels Menu Item Some Setting Items Administrator Authority File List Browsing No Authority Authority CB Setup O O O Board File List Preview and Download O O Delete O Header Footer O O O Administrator Network Setting Oo Menu User Setting O z Security Setting O Disk management Setting O CB Information O O Q O mark Accessible mark Not accessible When the Delete User Image Data security setting is set to Valid deleting is possible with file list browsing authority e When connecting the c
42. hat they are even 2 Insert paper at the specified position of the paper tray 8 Press the paper guide gently until it touches the paper See your printer s operating instructions for a descrip tion of the paper that can be used Paper tray Discharge tray e Depending on the printer s specifications some time may be required for cleaning of the print head Appearance of printer is for illustration purposes Switch on the power Press the power switch The power indicator lights This completes the preparation of the printer Press the Color Print B or the B W Print 4 button on the captureboard s control panel One page worth of data is read and the printing operation starts e Depending on the printer indicators etc may flash after the power is turned until the printer is prepared to print In this case see the printer s operating instructions and check that the printer is ready before starting the printing operation on the captureboard When finished printing Switch off the printer power and remove the paper Close the paper tray e Caution Do not turn off the power or disconnect the USB cable during printing E 14 Printing Basic Printing Operation Preparation Preparation Check that the AC power plugs of the captureboard and printer are connected to wall power outlets 7 Press the ON Standby 5 button and switch on the power On Standby Number of Copies i
43. he FTP server s verification screen opens Libraries Open a libraryto see your files and arrange them by foide date and cther properties Doon d Masic Sp titra Bb iis D rere Videos A E e ce Local Disk Fi cca HP RECOVERY ee os Toots Hy S C on INAVI9SO 1 a items Input the required fields on the verification screen t P Either the server does not allow anonymous logins or the e mail address was not Input the user name and password registered on the FTP server rae Rec seve a then click the Log In button ID 7 e Input the user name case sensitive and password case sensi Password tive then click the Log In button After you log on you can add this server to your Favorites and return to it easily amp Ber To prote the sean of yaur passnords and dete se MEDAY etend If the user name and password are correct the verification screen F A E Log on anonymously El Save password closes and the file list is displayed m Transfer the image file s to the computer OOM en as a From the FTP server s screen listing the folders files select the Tee desired folder s or image file s right click the mouse to display a Tom anes pull down menu select Copy then copy the folder s or file s to oo ihe 20110711 _170344jpg 20110711 170735 jpg My Computer etc be Copying is also possible by clicking and dragging E am EE uens P 20110
44. he set s input output terminals If the set is removed without disconnecting the cords it could tip resulting in accidental injury lf a printer is mounted on the set remove the printer before starting If not the stand could tip while the main unit is being mounted or removed resulting in accidental injury due to the printer dropping or tipping over 1 Unplug the power cord from the wall power outlet then disconnect all the connection cords from the main unit 2 Remove the locking knobs one on each side 3 Change the position of the main unit support pieces Lift the main unit about 1 cm to unhook it Insert the stand s hooks securely into in the mounting holes in the main unit s support pieces one on each side 4 Fasten the two locking knobs left and right to the mount support pieces 5 Connect all the connection cables Mounting hole Rear frames No i A N lock screws i lock screw Names of the Parts 6 Save button USB memory storage Control Panel The sheet is moved by 1 screen and read and the image is stored on the USB memory device When pressing a button please press the center area When connected to a computer by USB cable the image the square bulge The button may not work if it is is stored in the captureboard s
45. ication screen appears 2 Input the administrator s user name and administrator s password then click the OK button e No password is set upon purchase For the user name input admin then click the OK button Once verification is validated the administrator authority menu is displayed Click the desired menu item to display the settings page e The user name and password are case sensitive Be sure to input them properly Telem p PLUS Captureboard C 20 a er10 41 17 65 at Secret File requires a username and password is requesting that your usemame and password be basic authentication without a secure W E Remember my credentials Coo ean PLUS Captureboard C 20 RE E Remember my credentials Co Cea Tedem oo PLUS Captureboard C 20 ean Eel E 36 CB Setup and Network Setting Procedure Make the changes or settings m AAEE E The screen at the right is an example of what may be displayed rts eeen ea 3 here showing the CB Setup page PLUS captureboard c 20 meS ee ee YYA OD MAEYYYY MUDD Selecting and inputting Radio buttons One of the selection items can be selected When O is clicked it SEE NGO PRF switches to Input boxes When a box is clicked the arrow cursor switches to the char FTP User Name M acter input cursor Input characters in the s
46. ing starts Check the print e Is the each color line printed uniformly e Are there missing dots pale lines lines with thinner ink than others etc Remedy e f the nozzle is partially choked clean it e f the quality of the print does not improve even though the nozzle has been cleaned wipe off the ink on the surface of te nozzle For details see the User s Guide included with the printer Please see your printer manual for information about printing problems printer maintenance and details related to printing Updating the captureboard s internal program See the PLUS website for instructions on updating the program and to download the latest program E 49 BOARD TYPE Model name Standard C 20S Wide C 20W Installation method External dimensions T shaped Self standing T shaped legs or wall mounting W1480 x D675 x H1947 2 mm W1980 x D675 x H1947 2 mm Form legs Main unit weight 20 kg 25 kg 3 T shaped legs weight 12 5 kg Panel Size H910 x W1300 mm H910 x W1800 mm Effective reading size H900 x W1280 mm H900 x W1780 mm Number of Pages 2 Paging Endless in one direction Horizontal scrolling Drive method Sheet movement BOARD Reading method CIS Contact Image Sensor Reading illumination light source RGB LED Reading resolution Main scanning direction vertical sheet surface 1 92 dots mm 50 dpi
47. internal memory ressed on a corner i 7 Network 7 button Scrolls and scans the sheet one screen s worth and saves the data in the folder for saving The data is saved either on the captureboard or in a folder on the FTP server as previously set 8 Scroll Stop 4 button Scrolls the sheet one screen portion left then stops auto matically A press of this button while scrolling will stop the scrolling 9 USB A Memory port USB Type A Saves in commercially available USB memory images Color Print B W Print that have been read by the captureboard 10 Status These indicators notify of errors in the captureboard USB memory device network or printer according to whether they are lit or off and how they light see table below When the captureboard is functioning properly the status indicators are lit green See table below Also check the error message on the display window Print Setup Number of Copies Scroll Stop dlll For error information and remedies see page E 46 Display Meaning USB indicator Printer indicator window On Standby E l Printer problem 1 Off Lit red E l An unsupported printer is connected USB pratus Printer fi USB Memory not recognized 1 0 ee imag USB Memory storage problem oe e tt I 5 USB memory not connected Lit red off Pi MEMORY 9 F IERE Memory is ful Ep 11 Warning that disconnection of
48. istered on the captureboard E 39 CB Setup and Network Setting Procedure Network Setting Make the settings for the captureboard s IP address the FTP server s IP address etc For instructions on displaying the screen see Basic Setting Operations step 3 on page E 36 PLUS Captureboard C 20 tres 1041 17 68 255 255 2400 Soni FIP Save Directory Nome M files are saved Network Setting Item Setting Description Default IP address Change the captureboard s IP address Use a fixed IP address for the Any value captureboard When connecting to a network using the DHCP of a rout er etc change the IP address to one that is outside of the automatic acquisition range Subnet Mask Set the captureboard s subnet mask Any value Default Gateway Set the captureboard s default gateway Any value Folder for saving Set the folder in which the captureboard s scanned images are saved Board Board The images are saved on the captureboard FTP Server The images are saved in the specified folder on the FTP server FTP User Name This is the user name registered on the FTP server This is required for Blank the captureboard to log in to the FTP server and save image files FTP Password This is the password registered on the FTP server This is required for the Blank captureboard to log in to the FTP server and save image files FTP Server IP Add
49. m names of the function numbers see the Table of Function Numbers and Settings SS on the following page e When the Save button is pressed the On Standby function number to be changed is set and a ly dot lights ex F6 LS Status __ Pip 3 Select the setting then press the c Save button Dot lit Press the Color amp Print or B W Print button Color Print B W Print check the setting then press the Save but Save ton to set Check the setting according to whether the USB and Printer Status indicators are lit or off See the Table of Function Numbers and Settings Status on the following page USB Printer A Exit the CB Setup mode oR nasal Press the ON Standby button The capture oe board returns to the normal mode The display window returns to the number of On Standby copies display G E 30 CB Setup and Network Setting Procedure Table of Function Numbers and Settings Function so Gs A amber Setting Item Description Setting Status Indicators The date and time are stamped on the printing paper Year month Not lit E Time Setting and recorded in the file information when files are day hours stored minutes Selection of whether to print in A4 paper size or letter A4 USB Printer p size m Lit c Off J i Fe Paper Size e This operates when the captureboard is connected Letter USB Printer to a printe
50. mputer with standard USB port environment Mac OS X 10 5 or greater Windows Internet Explorer 8 0 or greater Web browser Macintosh Safari 5 or greater Enable JavaScript Remarks 4 The height is adjustable at 1747 1847 and 1947 mm 2 The value indicated for H height is the maximum height 3 Not including the weight of the printer 4 USB memory device not included The memory capacity corresponds to 32GB or less e Please note that for quality improvement purposes specifications and design are subject to change without prior notice E 50 Appendix Connections and Wiring Diagram e The connections and wiring diagram below is included here for checking the connections Captureboard and Printer Connections Diagram Computer Captureboard front panel To USB port a To PC dedicated USB port USB cable included with Captureboard 3m To Printer connector USB cable supplied with the printer To USB connector ii a He Printer To DC connector To DC INPUT connector Printer AC power adapter supplied with the printer AC power adapter supplied To wall power outlet Appearance of printer is for illustration purposes e The AC power adapters of accessori
51. n On Standby The mode switches to CB Setup and F1 is displayed on the yi display window s LEDs The mode returns to the normal mode if no buttons are oper ated for 10 seconds Number of Copies i Setup mode E 12 Setting the Time 3 While F1 is displayed press the Save button aye to enter Ina The display switches to c1 first 2 digits of year If no buttons are operated for 10 seconds while in the time setting Save mode the mode returns to the CB Setup mode 4 Press the Save button to move to the last dig Im its of the year C The display switches to c2 last 2 digits of year Notice The first two digits of the year 20 are fixed Simply press the Save button to switch to the last 2 digits of the year setting position Use the Color Print F Increase and B W Print 4 Decrease buttons to select 11 the last 2 T foes GG digits of the year then press the Save button ColorPrint B WPrint Save to enter gt The display switches to c3 setting of month ar Use the Color Print F Increase and B W Print 4 Decrease buttons to select 10 the month then press the Save 8 button to enter Color Print B W Print The display switches to c4 setting of day Use the Color Print F Increase and B W Print 4 7 Decrease buttons to select 08 the day
52. n page E 40 Depending on the network communications conditions some time may be required for identification and storage If E8 flashes for about 5 seconds Invalid is set at Security Setting gt Network Storage See page E 42 If L1 to L5 flashes for about 5 seconds this indicates that the network settings are incorrect See page E 47 If FL flashes for about 5 seconds there is not enough space in the save to location Delete image files to pro vide space See pages E 27 and E 29 If the ON Standby button is pressed during the scanning operation saving is interrupted and the image data scanned up to that point is saved To move the sheet surface wait until scrolling stops then press the Scroll Stop button When the Network 6 button is pressed image files are stored successively in the save to location The captureboard s date and time are recorded as the date and time of saved files For instructions on setting the time see pages E 12 E 38 When not using the captureboard press the ON Standby button to turn off the power standby mode On Standby E 24 Using the Captureboard Connected to a Network Transferring image files to deleting them from the computer Image files stored in the folder for saving Board or FTP Server can be transferred to your own computer The operation differs according to the setting for where scanned
53. n to the File List to return to the file list then repeat from step 3 Return to the File List Download button Close the web browser Click the web browser s close button X to close it E 26 Using the Captureboard Connected to a Network Deleting image files from the captureboard e When Invalid is set at Delete User Image Data in Security Setting files cannot be deleted This can be changed to Valid with the administrator s authority Gee page E 42 1 Perform steps 1 2 and 3 on page E 25 to display the file list screen 2 Select Delete When Y on the Download Delete selection button is clicked a pull down list is displayed Click Delete When Delete is selected the radio buttons switch to checkboxes E Download Delete selection button denm _ PLUS Capt reboard C 20 Select the image file to be deleted To select and delete individual files Click the checkbox for the image file to be deleted to check it To delete all files Click the Select All button All the checkboxes are checked If there are several files you do not want to delete uncheck the checkboxes for those files To uncheck the checkboxes for all the files click Cancel Select All to uncheck all the checkboxes e Images are previewed when thei
54. ntents The package contents are as described below Please check before use Main unit 1 Printer 1 Please see the instruction manual of the printer for informa tion about the printer accessories Depending on the type of product you have purchased the printer may be sold separately Stand 1 A mobile stand with casters for supporting the main unit A printer table and AC adapter box are included For the con tents of the stand s package and instructions on assembly see the stand s instructions or the separate Assembly and Setup Manual Pen tray 1 Pen tray fixing screws M4 x 20 temporarily fastened on main unit C 208S 3 screws C 20W 4 screws See the Assembly and Setup Manual for assembly instruc tions Captureboard Accessories Dedicated markers One each of black red blue and green Use these markers to draw on the sheet surface Dedicated eraser 1 Use this to erase the drawing AC power adapter with power cord 1 This is the power adapter for supply ing power to the captureboard See Page E 51 LTE86E S2 3 e The included AC power adapter and AC power cord are exclusively for use with this unit Never use them with other products Wall mount printer table 1 set Bracket fixing screws M4 x 8 4 AC power adapter box 1 Velcro 2 sets Sold separately Wall brackets 1 set These are brackets for mounting the main unit on a wall See the Assembly and
55. on displaying the screen see Basic Setting Operations step 3 on page E 36 4 x ane PLUS Captureboard C 20 Valid Invalid Valid Invalid Valid Invalid Valid O Invalid Security Setting Item Setting Description Default USB Memory Set whether or not to enable or disable saving on USB memory devices Valid PC connection USB Set whether or not to enable or disable saving in a computer storage Valid memory Network Storage Set whether or not to enable or disable transfer of image files to network Valid storage folder for saving Board or FTP Server to a computer or FTP server Notice e When set to Invalid the network storage memory is formatted Transfer important image files to a computer before setting this Delete User Image Data Set whether to enable or disable the file list Delete function with file list Valid browsing authority When set to Invalid the image files stored on the captureboard cannot be deleted Setup When the Setup button is clicked the above settings changes are sent to the captureboard overwriting previous settings Once overwriting is completed the CB Setup page switches to the Setup is completed character display E 42 CB Setup and Network Setting Procedure Disk management Setting The amount of disk space used can be checked the
56. or equivalent Sub scanning direction horizontal sheet surface 1 92 dots mm 50 dpi or equivalent Reading time Black amp white approx 15 s Black amp white approx 21 s Color approx 15 s Color approx 21 s File format JPEG PNG PDF Board ogreensize Standard type Standard 864 x 1248 dots High resolution 1728 x 2496 dots Wide type Standard 864 x 1728 dots High resolution 1728 x 3456 dots Type USB Flash memory External Compatible FAT FAT 16 32 Interface memory types Interface USB1 1 or USB2 0 4 Network LAN port RJ 45 10Base T 100Base TX Printing resolution 300 dpi or equivalent Printing No print colors 16 or grayscale Printer interface Conforming to USB 2 0 standards Clock Used for the timestamp and for file dating properties Added functions PC connection Images can be acquired and device settings made via USB using a browser AC power adapter Input AC100 240V 50 60 Hz Max 0 75 A Power supply Output DC 12 V 3 0 A Power consumption In standby 3 W During operation 12 W not including printer Operating Temperature 10 35 C conditions Humidity 30 85 No condensation Miscellaneous Miscellaneous Dedicated markers black red blue and green oS Fully IBM PC AT compatible computer equipped with standard USB port XP Home Edition Professional Edition Service Pack 2 or greater Vista 32 bit version Windows 7 32 or 64 bit version Operating Or Apple Macintosh co
57. r c Off m Lit Selection of the image s vertical to horizontal ratio Compressed USB Printer aspect ratio when printing Lit c Off Equal Ratio The image is printed with the same ratio Equal Ratio USB Printer E 5 Aspect Ratio Set as the captureboard s sheet surface Off Lit J ting Compressed The image is compressed in the hori zontal direction to the ratio of A4 or letter size paper for printing ex circles become ellipses If this is set to Invalid color printing is not possible Valid USB Printer RENN Valid When this is set color printing is possible m Lit Off ra Color Printing Invalid When this is set color printing is not possible Invalid USB Printer Off m Lit Selection of the image file s resolution Standard USB Printer Standard The vertical horizontal size of the scanned m Lit o Off image is set to 1 2 The amount of data High Resolu USB Printer is 1 4 that of when High Resolution is tion c Off Lit selected ro Resolution High Resolution The image file has the same resolu tion as the scanned image vertical horizontal size of 1 1 The picture quality is better than when Stan dard is selected Selection of the format in which image files are saved JPEG USB Printer Scanned images are converted into JPEG extension m Lit Off Graphics File jpg PNG extension png or PDF exten
58. r file name is clicked e Check the scanned images using their preview images before deleting them P LU S Captureboard C 20 iain E Select All button Cancel Select All button Delete the file s Be sure to transfer important image files to a computer before deleting them data backup Once deleted the files cannot be retrieved When the Delete button is clicked the image files whose check boxes are checked are deleted e When Invalid is set at Delete User Image Data in Security Setting the message No delete authority is displayed indicat ing that the files cannot be deleted See Security Settings on page E 42 PLUS Captureboard C 20 Language Engish gt E 27 Using the Captureboard Connected to a Network When the folder for saving is set to FTP Server When the folder for saving is set to FTP Server the scanned images are saved on the FTP server connected on the network Transfer these images onto the computer connected on the network The following explains how to transfer the files using Explorer on the computer Click the computer icon or from the Start menu click Computer Explorer opens Log in to the FTP server Click on Explorer s address field input the FTP server s IP address after ftp then press the Enter key T
59. raw a circle o at the four corners of the projection image 5 The image of the sheet screen will be read Check that there is a combined image on the computer screen 6 Save the combined image on the personal computer When Not Using the Captureboard 1 By all means cleanly erase the drawing from the sheet surface with the dedicated eraser Leaving the drawing for a long period will make it harder to erase 2 When disconnecting the USB cable of the Captureboard and personal computer first disconnect the USB at the personal computer side 8 Press the ON Standby button of the Captureboard and switch off the power standby mode E 11 Setting the Time The date and time are stamped on the printing paper and recorded in the file information when files are stored on the captureboard and FTP server so set the captureboard s time correctly The time can also be set from a computer via a network when connected to a LAN See page E 38 Description of Operations 1 Switch to CB Setup With the power turned on press the Number of Copies rol button while pressing the ON Standby button then release en the ON Standby button 2 Press the Save button and switch to Time Setting The mode switches each time the Save button is pressed Print Setup Contents of setting mode displayed on display window Number of Copies _ ee
60. reboard connected to the PC via a USB hub Connect the captureboard directly to the USB port of the PC The date is not updated The captureboard s battery is dead Contact your store of purchase If the problem persists please contact your nearby PLUS Corporation sales office dealer or store Condition Please Check Printer Related The captureboard s power turns on but the printer s power does not Check whether the printer s power plug DC plug is securely inserted If the power still does not turn on disconnect the AC adapter box and check whether the printer s AC power adapter side plug is unplugged from the AC power adapter For some printers it is directly mounted Printing is not possible when Color Print or B W Print button is pressed Check that the power cable of the printer and the printer cable are securely connected Check that the printer power indicator is lit Check whether the captureboard s status indicators and the printer s error indicator are lit If an error is displayed on the captureboard s display window see page E 46 Please see the printer instruction manual for information about printer errors The paper feed is abnormal Possible causes include damp paper overly thin or thick paper only one sheet of paper is set and a curved setting of the paper Please see the instruction manual for your printer An altered color is printed not
61. ress Input the FTP server s IP address Blank FTP Server Port This is the FTP server s standard control port number 21 Normally use with this number If the FTP server s port number has been changed change this following the instructions of the network adminis trator FTP Save Directory Name Input the name of the subfolder in the FTP server folder in which image Blank Setup When the Setup button is clicked the above settings changes are sent to the captureboard overwriting previous settings Once overwriting is completed the display switches to the Setup is completed Rebooting Wait for a while character display If the IP address subnet mask or default gateway have been changed the captureboard automatically reboots During rebooting the captureboard s display window LEDs flash in circu lar motion Wait until they turn off E 40 CB Setup and Network Setting Procedure User Setting Set the user name and password required for administrator and user verification and the number required for resetting the network settings For instructions on displaying the screen see Basic Setting Operations step 3 on page E 36 User Setting Item Setting Description Default Admin User name Set the administrator s user name admin e Input using no more than 14 characters The name will be case sensi tive for verification Admin Password Set the admini
62. ror Display Number Problem and Solution Printer not con nected No printing paper Printer problem Is the printer cable connected Is power being supplied to the printer When the printer uses an AC power adapt er is the cable disconnected somewhere e Connect the printer properly and switch on the printer power Has paper been set in the printer Turn the power of the printer off and then on again and load the printer with A4 or letter size paper Is the printer error indicator flashing or lit e Read the printer instruction manual USB Memory not recognized Is the USB memory unformatted e This unit supports the FAT and FAT 32 formats Perform the formatting with the personal computer Is a USB memory that is not supported by the captureboard being used e The file formats for USB memory devices that can be used on this captureboard are FAT and FAT32 Is the USB memory device plugged in fully e Please check the operation with a per sonal computer Is the USB memory damaged Memory storage problem An error occurred during memory storage e Please perform memory storage again e Do not insert or remove the USB memory during processing rT Reading problem There is a lighting fault of the reading light e Unplug the power plug from the power q source or a read signal error outlet and then plug it in again EE System error e There i
63. s a memory or internal fault e Unplug the power plug from the power ER EN outlet and then plug it in again Security protec e The operation is set to Disable in the e Change the setting of the desired item to tion security settings Enable See page E 42 co Color printing e Coloring printing is set to Disable e Change the color printing setting to E JI prohibited Enable See pages E 31 E 38 USB memory not USB memory device is not plugged into the e Plug the USB memory device into the connected main unit USB port Memory is full e There is no available space e Please delete unnecessary data using a personal computer See Page E 19 E 27 An unsupported printer is con nected A printer that is not supported by the cap tureboard has been connected e Press the ON Standby button and switch off the power When a record is required switch on the power and save to USB memory L LI rl Time setting error An error has occurred when setting the time e Start over and set the proper date and time gotten When the USb letter display is flowing Warning that disconnec tion of USB memory has been for Did you press the ON Standby button while the USB memory device was plugged into the main unit e A USB memory device is plugged into the main unit When the USB memory device is disconnected the power will be switched off and the unit will en
64. sion PNG USB Printer FB Format padf format Of Lit PDF USB Printer m Lit m Lit Setting of whether or not to output the header footer Off USB Printer information registered on the captureboard m Lit c Off Off The header footer information is not output On USB Printer On The header footer information is output when c Off Lit printing and when saving image files Note e Headers and footers refer to the information at the E q Header Footer top and bottom margins respectively of printed pages or images Titles company names or other characters or images can be inserted so that the same information is provided on all pages e For instructions on creating and registering head ers and footers see Creating and Registering Headers and Footers page E 45 e Depending on the type of printer the colors may differ from the actual graphic image continued on next page E 31 CB Setup and Network Setting Procedure Use the CD ROM included with the captureboard to install the driver Function i ae Number Setting Item Description Setting Status Indicators Setting of whether or not to notify the user that char Disable USB Printer acters or diagrams drawn on the back side of the m Lit co Off captureboard s sheet surface have not been erased Enable USB Printer This is effective for confidential meetings et
65. st time 1 Make the settings of the IP address etc required for connecting the captureboard to the network See Simple Network Set tings via USB page E 33 2 Use a commercially available LAN cable 10Base T or 100Base TX straight cable to connect the captureboard s LAN terminal to the LAN port on a hub etc 8 Make the captureboard s network settings or FTP server settings from a web browser See Making Detailed Settings via LAN on page E 35 If you plan to store image files on an FTP server create the folder for storing the files on the FTP server Ask your network administrator for instructions on settings and creating the folder e Be sure to transfer important image files stored on the captureboard itself to a computer data backup If the captureboard should for some reason malfunction depending on the malfunction the stored data may be lost or become impossible to transfer Note that PLUS will accept no responsibility whatsoever for loss of data etc e The captureboard will not operate properly if the firewall is activated The following explanation assumes that the LAN cable has been connected and the various network settings have been completed Saving scanned images on the captureboard or FTP server Preparations Check that the power plug is connected to a wall power outlet Press the ON Standby button to turn on the power On Standby Print Setup KS Number of Copies
66. strator s password None e Input using no more than 14 characters The password will be case sensitive for verification User Name Set the user name admin The limit to the number characters that can be input is the same as for the administrator s user name Password Set the password None The limit to the number characters that can be input is the same as for the administrator s password Network Reset No This is the number used for resetting the network settings See page E 44 Note Be sure to copy down this number It will be required if you forget the administrator s password Setup When the Setup button is clicked the above settings changes are sent to the captureboard overwriting previous settings Once overwriting is completed the CB Setup page switches to the Setup is completed character display e Copy down the user settings in case you should forget them admin Username O00OO0O0OOO0OOUUL Admin Password JOO0O0O0OOU0OOOUOLULI User Name Hoguguuuuuu dd HUL Password Hoguuuuuuu dd HUL Network Reset No E 41 CB Setup and Network Setting Procedure Security Setting These security settings can be made to restrict access to setting items For this page the security settings page cannot be displayed unless Administrator Menu is clicked and the administrator s user name and password are input on the verification screen For instructions
67. ter the standby mode E 46 f the problem persists please contact your nearby PLUS Corporation sales office dealer or store Meaning of Error Messages Network main unit related errors Error Display Number Problem and Solution LAN cable dis e No cable is connected to the LAN terminal e Connect the LAN cable properly connected eal FTP server rec e The user name or password is wrong e Input the correct user name and pass a ognition error word See page E 40 jal FTP server con e The FTP server s IP address is wrong e Consult the network administrator then iL oy nection failure set the FTP server s IP address See page E 40 I U FTP server writ e There is no FTP storage folder e Consult the network administrator then O l ing failure set the FTP storage folder E IP address not e An error other than one indicated by L1 to Unplug the power cord from the power set other net L4 has occurred outlet then plug it back in work error ey Network settings e An error has occurred in resetting the net e The network reset number is wrong Input a reset error work settings the correct number and repeat the opera tion See page E 41 ENE Header footer e This occurs when the size of the inserted e Adjust the image then repeat the opera Ae writing error image is too large tion Network related errors indicate errors in access between the captureboard and network In some
68. terruption of activities etc e PLUS will accept no responsibility whatsoever for malfunctions due to combinations with connected devices or the software used nor for damages arising from hang up etc NOTE Do not use ruled type tapes Do not move the sheet with tape etc attached to it Doing so could result in malfunction Do not attach template sheets or paper to the sheet Do not copy while film type objects or papers are attach to the sheet Doing so could result in malfunction Trademarks e Microsoft and Windows are registered trademarks or trademarks in the United States and other countries of the Microsoft Cor poration e Adobe and Adobe Acrobat Reader are trademarks of Adobe Systems Incorporated e Safari Apple Mac OS and Macintosh are trademarks or registered trademark of Apple Computer Inc of the United States The trademarks of the various companies and the product trademarks even when not written down will be given due respect Product names and company names appearing in this manual are registered trademarks or trademarks of the respective compa nies 1 The contents of this manual may not be reprinted in part or whole without permission 2 The contents of this manual are subject to change without notice 8 Great care has been taken in the creation of this manual however should any questionable points errors or omissions be apparent please contact us 4 Notwithstanding Section 3
69. the power Using a network via LAN 8 Switch on the printer power 1 Check that the captureboard is connected to a LAN For instructions on operating the printer see the port on the network printer s operating instructions 2 Press the captureboard s ON Standby button to 4 Press the Color Print amp or the B W Print button turn on the power The captureboard will move a one screen portion of 8 Press the Network 6 button sheet read the image and start the copy operation See Printing on Page E 14 When Not Using the Captureboard By all means cleanly erase the drawing from the sheet surface with the dedicated eraser Leaving the drawing for a long period will make it harder to erase See Using the Captureboard Connected to a Net work on page E 23 Press the ON Standby button of the captureboard and switch off the power standby mode The power cannot be switched off while the USB memory remains installed This is a prevention function against forget ting to unplug the USB memory Switch off the printer power e When turning on the power wait about 5 seconds or more after the power plug has been connected before pressing the ON Standby button he color of the images when printed in color or when saved in USB memory will differ somewhat from the marker colors Blurred characters thin lines overlapping of markers and other factors can cause colors to differ in places and can also res
70. the specified color Please replace the print cartridges with new ones There is no printing Check that the print cartridge is properly set Check that the print cartridge is not plugged e Print is very pale there are white lines on it or page is dirty e Printed colors are very different from those of the markers that were used Is the print cartridge s nozzle partially choked Make a test print and check the conditions of the nozzle E 48 Troubleshooting Also see the descriptions of error indications at Network main unit related errors on page E 47 Condition Please Check Network communications not possible e Is the LAN cable properly inserted i e The LAN cable could be defective a Use a straight cable 10Base T or 100Base TX compatible to connect the D captureboard to the network x e Set the IP address and subnet mask at Simple Network Settings via USB Be sure to check with the network administrator before making the vari Es ous settings Z Cannot log in e Is Caps Lock set on the computer s keyboard while inputting the user name and password Test Printing 1 With the captureboard s power on with the display window lit press the Number of Copies button repeatedly to display FP on the display window 2 Press the Color Print B button for a color print the B W Print button for a black and white print Test print
71. then press the Save button to enter The display switches to c5 setting of hours Color Print B W Print Use the Color Print F Increase and B W Print Decrease buttons to select 14 the hours then colorPrint B W Print press the Save button to enter The display switches to c6 setting of minutes Use the Color Print F Increase and B W Print Decrease buttons to select 16 the minutes then press the Save button to enter The display switches to F1 function setting 7 8 9 10 Press the ON Standby button to return to the normal mode e The captureboard also returns to the normal mode if you just wait 10 seconds CB Setup mode Normal mode This completes the time setting E 13 Printing printer sold separately Use a printer to print out the image that has been drawn on the sheet surface Use a PLUS designated printer Operations and names of parts differ from printer to printer For details of operations see your printer s operat ing instructions Preparing the Printer Please check that the captureboard and the printer have been connected See Page E 51 Power switch Set the paper Please use A4 or letter size printer paper e When using letter size paper set letter size paper in the device settings See page E 31 E 38 1 Arrange the paper edges so t
72. ttings are reset Pa E 32 CB Setup and Network Setting Procedure Simple Network Settings via USB Upon purchase by default the captureboard s IP address and subnet mask are not yet set When first connecting the captureboard to a network to use it use the simple network settings to set the captureboard s IP address on the network following the procedure below e When making network settings following the instructions of the network administrator e tis not possible to format the computer storage memory from the computer e Do not press operation buttons on the captureboard while the computer storage memory is being accessed from the com puter Doing so will result in increased time for response between the computer and captureboard and operations may not be possible Turn on the captureboard s power and connect the captureboard s computer USB port for type B to the computer using a USB cable e Normally on Windows XP Windows Vista Windows 7 the standard driver is installed automatically and the capture board is recognized by the computer as a removable device USB cable included with captureboard To USB port on computer To captureboard s computer USB port type B Open My Computer and in this open the captureboard removable device 1 Double click the My Computer or Computer icon to open 2 Double click the captur
73. ult in portions that cannot be scanned successfully The data in the memory for computer storage is deleted when the ON Standby button is turned off standby mode or the connection with the computer is cut The data in the memory for network storage is not deleted Operation Steps When used as a Captureboard The Captureboard uses a image sensor to read the text and drawings that have been written down with dedicated 4 color markers and accumulates the image data in internal memory The PLUS C 20 Software software on the included CD ROM can be used to combine the image of the projector projected onto the sheet surface with the words or diagrams drawn on the sheet surface Write and Draw on the Sheet Surface Please use the supplied dedicated markers for drawing To erase something erase it with the supplied dedicated eraser If anything other than the dedicated markers or eraser are used it may be impossible to erase the sheet or the sheet could get dirty When combining the sheet surface drawing with a projector image e For details on operating PLUS C 20 Software and on 1 Connect the computer on which PLUS C 20 Soft connecting devices refer to the separate Software ware is installed to the captureboard Operation Manual 2 Project the image of the personal computer with the projector 3 Adjust the projected image for a suitable size 4 Use the supplied dedicated marker to d
74. ve Directory Name e Once reset the network settings cannot be restored 1 While pressing the ON Standby button press the Network Ga button The captureboard switches to the network settings reset mode and OO flashes on the display window On Standby Network Press the Color Print F Increase or B W Print 4 Decrease button to display the network reset number e The network reset number can be viewed when User Setting is selected with administrator authority The display switches as follows each time the Color Print Increase button is pressed 01 gt 02 gt gt 99 gt 00 gt 01 The display switches as follows each time the B W Print Decrease button is pressed 99 gt 98 gt gt 01 gt 00 gt 99 Color Print B W Print Press the Save button to enter To cancel press the ON Standby button When the reset number matches LA flashes for 5 seconds on the display window then the captureboard s network settings are overwritten with the default values and the captureboard automatically reboots If LE flashes for 5 seconds then stops flashing remaining lit the reset number is wrong e Press the ON Standby button to cancel then start over from step 1 E 44 CB Setup and Network Setting Procedure Creating and Registering Headers and Footers The header footer function allows you to superimpose your company name logo etc at the top or bottom of scanned
75. word is set upon purchase For the user name input admin then click the OK button e When a user password is set input the user name case sensi tive and password case sensitive then click the OK button If the user name is correct the verification screen closes and the file list is displayed E Remember my credentials e We recommend setting a user name and password to pre vent unwanted persons from logging in Gee User Setting on page E 41 continued on next page E 25 Using the Captureboard Connected to a Network Click the desired date e Image files are managed in groups by date the date the scanned image files were saved Because of this display the date list Teile E PLUS Captureboard C 20 e Check that Download is selected for the Download Delete selection button When w is clicked a pull down list is displayed Click Down load Download Delete selection button PLUS Captureboard C 20 Al From the file list select the image to be transferred to the computer When the radio button is clicked it is checked and a preview image is displayed Download the image onto the computer 1 Click the Download button 2 The computer s Save as Screen appears 3 Select the folder for saving then click the Save button Downloading starts To download other files click Retur

User`s Manual(Eng)

Contents

Download Pdf Manuals

Related Search

Related Contents