Home

XGT PANEL eXP Series

1. XGT Panel There s no downloaded file improper communication Ox2C XGT Panel command Current state is not authorized Ox2D XGT Panel XGT Panel XGT panel S W update improper communication command A module to download is not listed up yet Failed to Initialize Update program Reason and measure It is failed to record the version information during update of XGT Panel If this symptom 5 repeated contact Customer Service Center To reboot the engine is not available because of wrong file which is developed by downloading wrong module or communication error Touch FlashDisk LSISProduct Update exe and set the device as update mode Then update again If this symptom is repeated contact Customer Service Center To reboot the engine is not available because of wrong file which is developed by downloading wrong module or communication error Touch FlashDisk LSISProduct Update exe and set the device as update mode Then update again If this symptom is repeated contact Customer Service Center To reboot the engine is not available because of wrong file which is developed by downloading wrong module or communication error Touch FlashDisk LSISProduct Update exe and set the device as update mode Then update again If this symptom is repeated contact Customer Service Center XGT cant be set as update mode because of XGT Panel error After downloading new XGT Panel module through
2. Cause 1 Touch s Calibration setting is not proper 2 Touch panel may be a break down Solution 1 Redo Calibration setting about touch Refer to the Device manual Ch 4 1 Touch Calibration 2 It you can t go to setting menu connect mouse to USB port and use mouse Buzzer does not sound Phenomenon When pressing buzzer buzzer does not sound Cause gt 1 When that the switch operates but the buzzer doesn t sound the buzzer is set as no sound 2 If the switch doesn t work too it seems that some error occurs in the touch function lt Solution gt 1 Redo environment setting for buzzer to sound Refer to the device manual Ch 4 7 Environment Setting 2 After setting to use buzzer check whether the buzzer sounds or not in the 1 5 setting windows Phenomenon After the system alarm about the lack of system memory occurs XGT Panel itself closes the monitoring and then moves to the start menu in unspecific time without user s operation lt Causes gt 1 The memory usage could be exceeding 95 2 The memory usage can be a bit increased when floating pop up windows or moving to several screens during monitoring In case when the number of image used for project is a lot the memory usage can more easily reach the limit In this case XGT Panel closes the monitoring by itself and then takes an action to secure the memory again lt Solution gt 1 In case of using vector image instead of ra
3. 12 2 12 2 Requirement for Low Voltage Command Suitability eee nennen 12 2 1 ancad Tor AG F PANO Clos exse des dc 12 2 12 2 Appendix 1 Troubleshooting NES Or PODEN ee Appendix 1 1 Appendix 1 2 Reaction Problem when Touching eee esses enne nnn nennt nnn nn snnt Appendix 1 3 4 Display Problem of Figure and ODjeCt cccccccescessssecsessesssessecsecseessessesessaesaeseessessaeseeseeseaecaesaeeeaeseesenseaees Appendix 1 4 5 Communication Problem eese seeeeee seen nn ennt Appendix 1 6 6 USB Removal of Memory esses esee enne tnnt natnra tratan sss rn trata snnt rss sra nas Appendix 1 7 7 Error Message during Execution of Program eese esee ener nnne nnn nnn Appendix 1 8 Appendix 2 Dimension Appendix 2 1 Appendix 2 2 Chapter 1 General Introduction Chapter 1 General Introduction 1 1 How to use the Instruction Manual This instruction manual provides information such as specification how to use etc of the product needed to operate eXP series of XGT Panel The user manuals configuration is as follows nnection Status XGT Panel Chapter5 It describes Panel s self diagnosis Chapter9 It describes the way to backup recipe loggin
4. When the power is re permitted the USB storage device or USB mouse is not recognized Phenomenon When the USB storage device was initially installed it was normally recognized However it is not recognized after the power is re permitted Causes 1 Due to the option of the Reset USB Power of the equipment there could problems in the recognition process 2 Depending on the USB storage device it may not be smoothly recognized Solution 1 If the power initialization option Reset USB Power of the equipment is selected cancel the selection and then permit the power again The Reset USB Power option is an additional function to improve the initialization of the storage device with slow recognition speed or low recognition ratio Depending on the characteristics of the storage device however the power initialization can be an obstacle to the initialization work Thus depending on Ap12 LS Appendix 1 Troubleshooting M Phenomenon select what has higher recognition ratio by properly using the power initialization option 2 Depending on the characteristics of the storage device it may not be recognized Use another USB storage device showing higher recognition ratio 1 3 Reaction Problem when Touching When touching the screen it reacts in a different area or it may not react at all Phenomenon When touching the screen it reacts in a different area or it may not react at all
5. 8 When deleting day directory in case all day directories in year month directory are deleted relevant year month directory is deleted 1 In unknown directory or file user file or directory searches the oldest thing among normal backup files except unknown directory or file 2 In case there is nothing except user data now searched directory backup operation fails Panel can t delete user data at this point operation stops 9 4 ES Chapter 9 File Backup through External Storage Equipment 9 3 Monitoring Connection Status of External Storage Equipment XGT Panels monitors connection status about external storage equipment designated when setting backup path in XP Builder The following figure is backup path specified in XP Builder x Summary GT Fanel Settings Screen Settings Security Settings Key Window Settings Language storage Settings Global Script Settings Auxiliary Settings Extended Cantraller Settings Destination Storage Image files memory Upload project file Flash memory Sound files Flash memory Recipe data SRAM memory Backup Storage Alarm data Notused mj Delete old file if disk full Logging data Motused Delete old file if dick full Recipe data Notused v Delete old file if disk full Capture image Notused Delete old file if disk tull Memo file Mot uged Delete old file if disk full Mideo file Not u
6. XP Remote Setting Screen Explanation of dialog box Explanation Allow XP Remote to connect It allows connecting remote XP Remote Max of XP Remote connections It designates the maximum number of XP Remote connected with XGT Panel Timeout value It stops communication when there is no request of communication from XP Remote within the designated time In case XP Remote is entitled to manipulation it withdraws the right to manipulation 10 seconds 300 seconds Enable control by XP Remote XGT Panel will automatically allow state control after the monitor was started after Monitor Start For the function of XP Remote in detail please refer to XP Remote user s manual 4 12 LS Chapter 4 System Configuration 4 7 Buzzer Setting It may adjust volume and height of XGT Panel Buzzer System Configuration Backlight Setting Touch Setting DateTime Setting Environment Setting Ethernet Setting XP Remote Setting Buzzer Setting 1 Goto MainMenu Buzzer Settings Buzzer Settings Screen Explanation of dialog box Explanation It may turn on or off the buzzer that occurs when in touch mode It may adjust the volume of Buzzer It may adjust the tone of Buzzer Chapter 5 Diagnostics Chapter 5 Diagnostics It describes the diagnosis function for XGT Panel s communication terminal screen and touch function If you press Diagnostics button on t
7. external power supply trouble Serious trouble may occur to the entire system due to erroneous output operation of the HMI Design Precautions Caution gt In output signal or communication cable should be at least 100mm apart from High voltage power wires Otherwise it may cause erroneous output operation Installation Precautions Use the HMI in an environment that meets the general specification contained in this manual or datasheet Otherwise it could result in electric shock fire erroneous operation or deterioration gt In case of much vibration in the installed environment be sure to insulate the HMI from direct vibration Otherwise it could result in electric shock fire or erroneous operation sure not to let foreign substances such as conductive debris inside the product Otherwise it could result in electric shock fire or erroneous operation Safety Precautions EE Wiring Precautions Be sure to turn off the HMI and external power before wiring Otherwise it may result in an electric shock or damage to the product gt Wire correctly by checking each of the product s rated voltage and terminal layout Otherwise it may result in fire electric shock or erroneous operation gt Tighten terminal screws with specified torque when wiring If terminal screws are loose it may result in short circuits fire or erroneous operation gt Use the exclusive HMI
8. 2 Directory in the name of Year and Month will be formed below the Memo Directory 3 Structure of directory thereafter is same as that of logging backup route 4 Memo backup file has the name made of hour minute second when it was created a Backup file is created in the type of bitmap b File name starts with M that represents the screen image which includes the index information of hour minute and second thereafter c In case backup file is created at the same time up to second it increases the far end index information 1 When changing device time in case of changing current time into after time we guarantee the normal operation But in case of changing current time into early time we dont guarantee the normal operation In this case you have to delete directory including the changed hour and its lower directory for normal operation For example if you change time from December 10 to December 5 you have to delete year month directory created in December 10 and restart the device 2 Sorting by project is not supported for each logging recipe screen image For example there are no 1 2 and 3 logging groups in the project A And in case each logging group backups the file 1 2 3 directories are created and each data is saved under each directory Then in case file backup occurs in the project B having no 1 2 logging group backup file is created in same directory of project A In this case you have to sort the bac
9. the project in the USB again If this symptom is repeated contact Customer Service Center The font file which is needed for project is not saved in the USB storage equipment Save the project in the USB If this symptom is repeated contact Customer Service Center The font file is not saved correctly Save the project at the USB Save the project at the USB If this symptom is repeated check the USB and if the USB is normal contact Customer Service Center The data cant be analyzed because the LSIS p1415 Appendix 1 Troubleshooting Occurence Error message location am download file XGT Panel Cannot delete previous project data XGT Panel move new font XGT Panel Cannot move new project data files XGT Panel Cannot MONE project backup file XGT Panel Previous instance is not terminated Start Server Fail Restart XGT Panel Failed to Start Echo Server Fail XGT Panel idi d a connection Error code Address Object 0x65 0x66 0x67 0x68 Ox01 0 02 XGT Panel booting 0x03 0 04 1 16 L S Reason and measure project data file is not saved correctly Save the project at the USB again If this symptom 5 repeated check the USB and if the USB 15 normal contact Customer Service Center The data of the project can t be deleted because of device error If this symptom is repeated check the USB and if the USB is normal contact Customer
10. 1 General Introduction 1 1 How to use the Instruction Manual 0ccccccccccccccccccccccccceessesecececececccccceuuaneussssseeecccceecececeuunauaseseeeeeceeeeeeesesuaaaneesess 1 1 1 2 CERE E 1 6 Chapter 2 System Configuration 2 1 2 2 OM zs 2 3 Chapter 3 Standard Specification 3 1 General 3 1 II Oo I RT 3 3 Chapter 4 System Configuration 4 1 Backlight Setting RR 4 2 4 3 m 4 4 A Ae NAICS NE OUND 4 5 ee WING PITE TT TET se cm 4 11 t 4 12 S NA REM 4 13 Chapter 5 Diagnostics 5 1 Screen DIAQMOSIS EET 5 2 OSS 5 3 5 3 Backup M mory edo ET E rrr pr 5 4 5 4 Flash Memory Diagnosis 5 5 5 5 USB Momon sarrasin ii aiiai iaaiiai Eei niai UU P ISP I NEL EU ME nnii 5 6 5 6 Senai Communication 05 tesa ats Em 5 7 Content Chapter 6 Viewing Information of PLC Conn
11. DSerial Goto MainMenu HMIManager JSB Card Spec Folder Mame 1156 Storage Total Space 3783 81 MBytes Used Space 2541 22 MBytes Available Space 1242 69 MBytes Write Operation SUCCESS Completion of USB Memory diagnosis If Read Disk Information Error occurs remove it first and test it after inserting it again If the error message shows up repeatedly please contact with customer service center 5 6 S Chapter 5 Diagnostics 5 6 Serial Communication Diagnosis If you press Serial button you can diagnose Serial ports which is equipped at XGT Panel In case of diagnosis purpose you have to connect the loop back terminal at each port Diagnostics Screen Touch Backup Memory Flash Memory USB Memory O Serial Goto MainMenu Serial Diagnostics AN COM Test OK Completion of serial port diagnosis LS 15 5 7 Chapter 5 Diagnostics The RS 232C port terminal should be made as follows Connect the No 2 and 3 pin The RS 422 485 port terminal should be made as follows D Sub pin No 1 connects to Terminal block pin No 2 and pin No 4 D Sub pin No 6 connects to Terminal block pin No 1 and pin No 3 RS 485 RS 422 485 TX SG FG 5 8 LS Ch 6 Viewing Information of PLC Connection Status Chapter 6 Viewing Information of PLC Connection Status PLC Information it shows XGT Pane
12. DateTime Setting e Environment Setting Ethernet Setting Ox Remo Setting Buzzer Setting Goto MainMenu Sfulhy press and briefly hold stylus on the center of the tard Repeat as the target moves around the screen Press the Esc key to cancel 1 XGT Panel s Touch Calibration setting is basically set If Touch location is way off adjusting menu with touch can be hard through touch In that case You can select the Touch Calibration setting menu by USB mouse or simply touch 5 times at the empty space on the main screen 2 When touch location changes in using redo touch setting Chapter 4 System Configuration 4 3 Date Time Setting If you press DateTime Setting button in System Configuration as follows you can set XGT Panel s data and time System Configuration Backlight Setting Touch Setting DateTime Setting 351 Environment Setting Ethernet Setting XP Remote Setting Buzzer Setting Goto MainMenu DateTime Date 4 23 2015 E Time 9 23 11 12015 pe TW TF S 31 1 2 3 4 7 8 9 10 11 14 15 16 17 18 21 22 88 24 25 28 20 30 1 5 6 7 4 23 2015 You can set data time at device information of communication dialog at the XP Builder For details please refer to the XP Builders manual 4 4 LS Chapter 4 System Configuration 4 4 Environment Setting If you press Environment Setting button in System Configuration screen as foll
13. Exceeded the minimum aji You exceed the maximum value to input lu d 8 0 01 XGT Panel Device setting 0 02 0 02 XGT Panel Please enter an integer between 0 and 255 XGT Panel Viewing device information 0x03 0x01 XGT Panel Failed to Start engine Please update engine again XGT Panel XGT Panel 4 1 me Switch h01 XGT Panel h01 XGT Panel Invalid password h02 Number indication device 0x06 Number input device 0x03 Value Exceeded the maximum T Value You exceed the minimum value to input When you input the value input can t be done because of wrong input Check the input condition of each object in the Builder and input again 0 04 XGT Panel 0 05 XGT Pane 0 06 XGT Panel Invalid at Input Case Character indication device 0x08 None Character input device None None None LSIS 19 Appendix 1 Troubleshooting Coane Object Type location None None OxOE None None 0x20 None 0 2 None Scheduler 0x22 None related poe 0x23 None related Logging 0 24 related 0 25 Data list 0x00 0x01 XP Builder There s not Password File Failed to Create XP Builder Invalid Backup Media XP Builder Failed to Create version File XP Builder File Size Error 0x02 Project 0x26 0x03 download 0x04 0x05 110 LS 1 Error message Rea
14. In case of downloading the project by using storage equipment the project should be saved in the one lower directory between those directories 3 Select one among directory lists and touch OK 4 Touch OK button then download is started 7 2 Chapter 7 Storage Function 7 3 Uploading Project through the Storage Equipment 1 If you touch Project Upload the following dialog shows Select Source USB Transfer project file to WSB StorageVXP Backup Cancel 2 Please select the targeted external memory in Select Source Following path is indicated depending on the selected external memory USB USB Storage XP Backup 3 If you touch OK button project backup file is transmitted to the selected path 4 The project backup file is saved when Download project backup file is selected when downloading the project If you dont select project backup file is not saved in the device and transmission to the storage equipment is not available Chapter 7 Storage Function 7 4 Updating the Device through Storage Equipment 1 If you touch Project Upload the following dialog shows Select Folder Select Source USB WSB Storage XP_Software 2 Please select the targeted external memory in Select Source Following path is indicated depending on the selected external memory USB USB Storage XP_Software In case of updating the device by using storage equipment the XGT Panel Softwar
15. Service Center Downloaded font file is moved to the original storage location But when it fails the downloading is stopped If this symptom is repeated contact Customer Service Center The project data classified according to the content is moved to the original storage location But when it fails the downloading is stopped If this symptom 15 repeated contact Customer Service Center The downloaded project zip data is moved to the original storage location But when it fails the downloading is stopped If this symptom is repeated contact Customer Service Center XGT Panel software was already started Reboot the device If this symptom is repeated contact Customer Service Center The XGT Panel software can t initialize the communication status normally Check the communication status again If this symptom is repeated when communication is normal contact Customer Service Center The XGT Panel software can t initialize the communication status normally Check the communication status again If this symptom is repeated when communication is normal contact Customer Service Center The XGT Panel software cant initialize the communication with the XP Builder normally Check the communication status again If this symptom is repeated when communication is normal contact Customer Service Center Appendix 1 Troubleshooting Error code Address Object Failed to rename oo UpdateNew exe Failed to Delet
16. Structure in case of File 9 1 9 2 Operation setting when there is no space for 9 4 9 3 Structure of path of video file and video capture 9 5 Chapter 10 Installing and Wiring MINS TAMIA Ath cece M 10 1 10 1 1 S rounding Condition OT 10 1 10 1 2 Notice in Handling cccccccccssscssecseesseessecseeceessecsescsesseecsesseesseessessaesuesaessaessaecaessaessaesaeasaeseaeseessaeseasssnssaesanes 10 2 10 1 3 Panel Design and InstallellOni 2cs2 nano riao vuota van rna hne nana nrbe nb 10 2 10 2 Panel Wining 10 5 LOARA ALAO 10 5 E E E E E EE E 10 8 Chapter 11 Maintenance Contents Dh PUA TAINO 11 1 ADE AEUR E ee E mmm 11 1 11 3 Periodical Maintenance 11 2 Chapter 12 EMC Standard Certification 12 1 Requirement for EMC Standard Certification esses enne enne nnne nnn nnns 12 1 12 1 1 CE standard certification 12 1 12 1 2 KC standard certification
17. alarm search e The Flow alarm indicates current or the latest alarm at the bottom of screen e The System alarm indicates the important problems from operation 6 Logging function t provides conditional logging according to device condition and continuous periodic logging which operates periodically according to time and device status t provides 256Kbyte areas for backup e Backup into USB storage device is available e Backup datas type is stored in Excel itis easy to use c Recipe function e t provides READ WRITE function e t provides 128Kbyte areas for backups General recipe it set up 10 000 double words for each of one of them e Backup into the USB storage device is available e Backup datas type is stored in Excel itis easy to use d Scheduler function e It can be set up to Max 32 e Print function e t provides a Screen Alarm print function e It can be printed by USB printer f Script function e t provides more flexible function by user Script e t can be diversely applied to such as including Global Object Screen indication and so on 8 Stable product suitable for international standards a standard acquisition b UL cUL standard acquisition Chapter 1 General Introduction 1 3 Terminology It describes terms used in this manual A standard element that has a specified function which configures the system Devices Ex CPU module Module such as I O board which ins
18. backup 1 Directory named Logging is created under the root directory of USB equipment 2 The directory whose name is logging number is created under Logging directory 3 The directory whose name is year month is created under Logging number directory a Includes day directory under b Up to 500 day directories can be created LS 9 1 Chapter 9 File Backup through External Storage Equipment E A c Name of year month directory includes the firstly created day information under its directory Ex In case directory is created in 2010 October and includes directory since 15 under directory s name 15 2010 10 15 FF FF at end means the directory can save more data created in 2010 October currently the number of lower directory is 500 or less d In case month is changed changes directory name to day information of last created day directory Ex In case month becomes November from October and directory from 15 directory to 30 have been created in 2010 October directory 2010 10 15 30 0 e Though month is not changed in case the number of day directory under year month directory is 500 or above directory name is changed into name including day information of last created day directory Ex In case the number of directory from first to 15 is 500 or above in the directory created in 2010 October 2010 10 01 15 0 f In case there is the year month directory having same start day and end day when ch
19. e Do not drop or cause heavy e Do not disassemble voluntarily When doing this we are not responsible for the product e When wiring be careful that the remains do not enter into XGT Panel 10 1 3 Panel Design and Installation Here describes how to install XGT Panel in panel and notice 1 Panel Cut e Before installing the XGT Panel in panel panel should be made with the following d 10 2 Chapter 10 Installation and Wirin 2 Mounting XGT Panel e Keep the distance of 100 mm between XGT Panel and panel per each direction Unit mm 100 100 100 1 To be affected at a minimum by the electromagnetic waves radial noise or heat from other controllers 1 needs to keep its distance as the above explanation 2 When installing consider the power and communication cable wiring In case when the size of the panel cut exceeds the range of the standard allowance 0 1mm when producing panels the contact area between Gasket and the panel can get small which can weaken the waterproof dustproof effect e When mounting the XGT Panel inside a panel ensure that you use the gasket to protect against dust or water ingress Waterproof Dustproof Gasket 10 3 Chapter 10 Installation and Wiring E o 1 Must be used the gasket to prevent dust or other contaminant ingress 2 When mounting at the panel if the surface of panel is uneven water or dust can enter the machine through th
20. file size is aoe invalid XGT Panel Project download from USB storage device Font file name length is XGT Panel invalid Ox61 Font file is not ene downloaded XGT Panel XGT Panel Font file size is invalid gt lt oO CO 0x64 XGT Panel Cannot unmarshall Reason and measure Data storage type is not correct Update the XP Builder There is no project data file at designated location Check the connection status of USB and if there is no error save the project to USB again The name of project data file is not saved correctly Save the project at the USB again If this symptom is repeated contact Customer oervice Center The project data file can t be found Save the project data file at the USB again When this symptom is repeated check the USB If there is no error contact Customer Service Center The project data file is not saved correctly Save the project data file at the USB again When this symptom is repeated check the USB If there is no error contact Customer Service Center The project backup file which should be downloaded is not downloaded because of communication error Download again The project backup file is saved incorrectly oave the project at the USB storage equipment again When this symptom is repeated check the USB storage equipment and if the USB is normal contact Customer Service Center The font file s name is saved incorrectly Save
21. installed at the panel it is not guaranteed with all installation environment even though its protection standards for the front parts are Satisfied 2 IP65 rating guarantees the enclosure 15 dust proof 6 and protected against jets of water 5 3 IP20 rating guarantees protection from solid foreign objects of 12mm diameter and greater 2 but it does not guarantee protection from water ingress 0 Notices 1 In the environment where the protection grade of XGT Panel is exceeded or not satisfied the damage of the device or malfunction can occur due to the failure of protecting the product 2 Since the protection grade of XGT Panel is the waterproof dustproof standards it cannot be protected from oil corrosive gas and metal particles 3 In case when Gasket is damaged by chemicals and continuous vibration its waterproof dustoroof effect can be weakened 4 In case when installing the panel make sure that dust and water are not brought in panels ing impact Handl ice in mm Z Thickness 5 Hn un aie REEERE Imension c 2 gt X Wide lon Classificati eXP40 TTA eXP40 TTE OL MELLE UEM MODELL pore SO OS ML DULL TOS oh ttt te Pe Nube E D E E M EEE M rtr rt Chapter 10 Installation and Wiring 10 1 2 Not It describes the notice from opening to installation
22. remove communication cable or turn off the device during updating It may cause the abnormal operation Chapter 9 File Backup through External Storage Equipment M Chapter 9 File Backup through External Storage Equipment Describes on management function about external storage equipment saving backup data of logging recipe and screen image 1 XGT Panel can back up the logging recipe and screen image data at USB storage equipment according to setting in XP Builder 2 In case there is no space for backup in the designated storage equipment it continues backup deleting previous data or stops backup according to setting in XP Builder 3 Monitors attachment status of backup equipment at XP Builder 9 1 Path Structure in case of File Backup Backup path structure of logging recipe and screen image is as follows n Root directory of CF or USB storage equipment m am Logging LL 1 Logging Number LL YYYY MM BeginDay EndDay O DD BeginHour EndHour 0 space for one folder is full Li DD BeginHour EndHour 1 There is free space for one folder DD Beg inHour FF There is free space for one folder i HH BeginMinute FF Lhhmmss0 CSV 2 same as lower structure 1 Recipe Rhhmmss0 CSV same as lower structure of each logging number Screenlmage ShhmmssO BMP same as lower structure of each logging number t 1 Path structure in case of logging
23. the communication time out is set to be too short Solution 1 It occurs because timeout is set much smaller than sum of request time of communication data and response time Ap16 5 Appendix 1 Troubleshooting from PLC In the device setting at the XP Builder after setting communication time out to be big download program and execute again It seems that communication doesn t work Phenomenon Communication doesn t work lt Cause gt 1 Communication setting or cable may be not normal lt Solution gt 1 In case of RS 232C check whether connection setting is normal or not in XP Builder 2 In case of RS 422 485 check whether station and communication connection setting is normal or not 3 If 1 2 is normal do diagnosis about PLC RS232C PLC RS485 422 at the Serial diagnosis screen of device menu Refer to the Device manual ch 5 6 Serial Communication Diagnosis 4 If 3 is normal check whether connection cable has error or not 5 In case of Ethernet check the port and IP setting about relative PLC gt Before trial operation of the product be sure to check if a normal communication is available between XGT Panel and the subject device of control 1 6 USB Removal of Memory Card When removing the USB memory equipment device is stopped for some times Phenomenon This happens when doing data backup including logging recipe Cause 1 This happens because memory card i
24. 3 type grounding for the FG terminal If not grounded it may result in erroneous operation Be sure not to let any foreign substances such as wiring debris inside the module Such debris may cause fire damage or erroneous operation Safety Precautions Startup and Maintenance Precautions 0000 Do not touch the terminals while power is on Otherwise it may cause electric shock or erroneous operation gt Turn off the HMI and external power when cleaning or tightening the terminal Otherwise it may cause electric shock or erroneous operation Do not charge disassemble heat short circuit solder etc the battery Mishandling the battery may cause overheating crack fire and may result in injury or fire Do not disassemble PCB from the product case or modify the product Otherwise it may result in fire electric shock or erroneous operation gt Use cellular phone or walky talky at least 30cm away from Otherwise it may result in erroneous operation Disposal Precaution gt When disposing of this product or battery treat it as industrial waste Otherwise it may cause poisonous pollution or explosion Revision History fn Revision History Version Date Contents Revised location V1 0 15 08 First Edition x The number of User s manual is indicated the right side of the back cover c LSIS Ca Ltd 2015 All Rights Reserved Contents Chapter
25. 4 6 2009 EN61000 6 2 2005 61000 4 8 1993 A1 2001 EN61000 6 2 2005 EN61000 4 5 2006 EN61000 6 2 2005 EN61000 4 11 2004 HE1 NC NotConform NT NotTested NA Not Applicable Applicable to the only iXP70 TTA DC iXP80 TTA DC iXP90 TTA DC RE3 Applicable to the only iXP70 TTAAC iXP80 TTA AC iXP90 TTAVAC Electrostatic Discharge Radio Frequency Electromagnetic Field Fast Transient Radio Frequency Continuous Conducted Power Frequency Magnetic Fields Surges Voltage Dips and Interruptions Chapter 12 EMC Standard Certification Directive Electromagnetic Compatibility Directive 89 336 EEC amended by the Directive 93 68 12 1 2 KC standard certification The XGT Panel acquire the electromagnetic fitness registration KC specification certified by wave laboratory under information communication part A grade device This device acquires KC for industrial use If device is not purchased properly exchange it to device for home use 12 2 Requirement for Low Voltage Command Suitability It is required to get the needed Stability for the device operated at AC50 1000V DC75 1500V s power The following describes attention about installation and wiring for the suitability when using the XGT Panel Though the following data is made by requirement of regulation and standard we don t guarantee that all devices are suitable for the above command The method to be suitable for the EMC command an
26. PU doesnt have the history about operation mode conversion GLOFA GM CPU FEnet Cnet XGK XGB XGI XGR CPU FEnet Cnet 6 6 History of PLC Power You can check the history about when PLC was turned on and off Information OK HMI PLC Mode Power System Contents Main base Main base Main base Main base Main base Main base Main base Main base The following PLC is available for viewing the history of when our PLC was turned off and on MASTER K CPU doesnt have the history about when our PLC was turned on and GLOFA GM CPU FEnet Cnet XGK XGB XGI XGR CPU FEnet Cnet Ch 6 Viewing Information of PLC Connection Status 6 7 History of PLC System You can check history about PLC system Information OK HMI PLE Error System contents 2007 01 15 15 02 16 Momently shut down 2007 01 15 15 02 17 Base information error 2002 01 15 15 02 12 Base information error 2007 01 15 15 02 17 Base information error 2007 01 15 15 02 18 Moment shut down 2007 01 15 15 02 21 Base information error 2007 01 15 Base information error 2007 01 15 15 02 21 The following PLC available for viewing history about system MASTER K CPU doesnt have the history about system Only GLOFA GM CPU has the history about system Other CPUs don t have the history about system XGK XGB XGI XGR CPU FEnet Cnet ee LS Ch 6 Viewing Information of PLC Connection Status 6 8 N 1 Se
27. Right choice for ultimate yield LSIS strives to maximize customer s profit in gratitude of choosing us for your partner Human Machine Interface XGT PANEL eXP Series User s Manual eXP40 TTA eXP40 TTE eXP60 TTA Safety Instructions eRead this manual carefully before installing wiring operating servicing or inspecting this equipment L6 eKeep this manual within easy reach for quick reference http Wwww lsis com Safety Precautions Pn _ Before using the product To use the product safely and effectively please read this instruction manual thoroughly before use gt Please keep to the safety precaution for it is to prevent accidents and potential danger from occurring gt Safety precaution is classified into Warning and Caution and their meanings are as follows 2 Warning Violating the instruction may result in serious personal injury or death Caution Violating the instruction may result in slight personal injury or product damage gt The indicated illustrations on the product and in the manual have the following meanings Be cautious for danger may be present Be cautious for there is a possibility of an electric shock gt After reading the instruction manual keep it handy for quick reference Safety Precautions Design Precautions Warning Install a safety circuit external to the HMI to protect the whole control system in case of
28. ailed to read USB information XP Builder Failed to read Flash memory information XP Builder Failed to clear Temp Directory 0x07 0x08 0x09 Ox0A Project download OxOB OxOC OxOD Failed to delete Image XGI Panel File Please reboot XGT Panel Oocurrence Error message location Failed to delete Font File XGT Panel Please reboot XGT Panel Reason and measure In case of not reading file where project property is included download is stopped If this problem is repeated Contact the near Customer Service Center In case of not reading information about alarm history because of error of NVRAM download is stopped If this problem is repeated Contact the near Customer Service Center Project is set to store data at CF card equipped at device By the way now it can t read information about CF card Check the installation status of CF card and if it is normal check the CF card If this problem is repeated contact Customer Service Center Project is set to store data at USB storage device equipped at device By the way now it cant read information about USB storage device Check the installation status of USB storage device and if it is normal check USB storage device If this problem is repeated contact Customer Service Center In case that it can t know information about memory status download is stopped If this problem is repeated contact Customer oervice Center In case tha
29. al check Check at the Diagnostics of XGT Panel Touch status Damage of Touch Visual check Damage or deterioration 9 Visual check of protection sheet 11 2 LS 0 50 Modify it to meet the general standard 10 85 RH environment standard the Fixed firmly Retighten screws gt Wind the fixed screw of connector Oe DN 264V Supply power modification DC24V DC19 2 28 8V If guarantee duration is e Check the total of power stoppage time and exceeded even tough there is guarantee duration no battery voltage drop indication change the battery e There is no battery voltage drop indication the backlight Panel There is no damage or When error occurs change deterioration touch There is no damage or When error occurs change Keep the proper distance Not loose Chapter 11 Maintenance 5 1 Battery exchange time 5 expressed by alarm System alarm is expressed when system alarm category is set at the XP Builder as follows Project Property Summary XGT Panel Settings Screen Settings Security Settings Key Window Settings Language Storage Settings Global Script Settings Auxiliary Settings Extended Controller Settings Screen Capture E mail Property Output Runtime print Use E mail function Script Watchdog Time System Alarm Window Maximum time 5 seconds Alarm window pop up Flow Alarm Display Mode Communication Error Display Redraw at oc
30. an set whether you use buzzer through Buzzer On Off button It may test the buzzer Reset USB Power after boot When XGT Panel starts USB power state is converted from Off to On initializing the up connected device XGT Panel screen to increase the operating speed will use the images used on the screen prior to the start of monitoring in advance and then loaded into memory However if the image of a very large amount of projects used due to the memory space constraints will not be able to load all the images before monitoring begins In this case when the switching screen is performed it will take time for loading images and retrieving to search the memory and to delete them that had not loaded at the beginning Low Memory Mode of the part This kind of process may XGT Panel make slow In this situation we recommend that you use a Low Memory Mode by selecting on the Not use of image cash if you use Low Memory Mode rather than loading the image prior to monitoring it requires less memory by reducing time for the loading the original images into the memory and deleting them in the project Consequently the performance can be improved All files downloaded by the user are deleted If connection password is set you have to input the password This password is connection password needed for project download etc You can set that password in Communication Clear SRAM memory and XGT Panel Information gt Password tap The d
31. anelusingbracket Panel on the panel using bracket 1515 2 1 Chapter 2 System Configuration CE EN 1 USB Memory Connection Backup of data such as alarm logging recipe and storage of screen data 5 USB Interface 2 USB Memory Connection Send Receive project data Send XP Runtime 3 User s Interface Connection Using mouse keyboard 4 Printer connection Printing function Battery Cover 6 Backup Battery DIP Switch NO 1 A Config Backup Battery On B Config Backup Battery Off NO 2 A Config Lal B Config Do not use N A Config COM1 RS 485 Termination resistor On 1200 N B Config COM 1 RS 485 Termination resistor Off 0 3 04 A Config RS 422 Termination resistor On 1200 0 5 B Config COMS RS 422 Termination resistor Off N A Config O S Download mode B Config Operation mode Input DC24V and FG Connections Ethernet 10Base T 100Base TX 1 Send Project Data Ethernet Terminal 2 Receive backup data and project file 3 Send XP Runtime 4 PLC or other control device CONG Connector RS 422 485 COMS PLC or other control device d PONA RS 232C 485 COM2 COM1 PLC or other control device onnector 22 LSIs Chapter 2 System Configuration 1 For further details on connection of communication please refer to Communication Instruction Manual 2 For further details on installation please refer to the Chapter 10 2 2 System Configur
32. anging directorys name due to over 500 day directories or change of month last digit index number increases Ex In case there are three year month directories that are having over 500 day directories created in October first and 2010 year October directory 2010 10 01 01 0 2010 10 01 01 1 2010 10 01 01 2 4 Day directory is created under year month directory a Hour directory is created under day directory b Day directory can have up to 500 hour directory c Name of day directory includes not day information but also hour information of first created hour directory d Relation between day directory and hour directory is same as relation between year month directory and day directory 5 Directory whose name includes hour information is created under day directory a Hour directory includes backup file under b Hour directory can include up to 500 backup file c Name of time directory include not only hour information but also minute information of first created file under d Relation between hour directory and backup file is same as relation between year month directory and day directory 6 Name of logging backup file includes the created hour minute second information a Backup file is created in CSV format b File name start with L meaning logging and includes hour minute second index information c In case backup file is created at the same time in terms of second index information at the end of file name increas
33. ation In order to use XGT Panel it is necessary for XP Builder to prepare project data and transmit it to XGT Panel Normally you can connect with XGT Panel using RS 232C Maximum Communication speed is 115 300 bps RS 232C XP Builder XGT Panel With Ethernet in use you can transfer project data more quickly With LAN environment built in the following configuration you may use it more easily and effectively AP Builder AGT Panel 1 1 connection will be supported just in case LAN environment is not built Ethernet AP Builder AGT Panel Chapter 2 System Configuration If it is impossible to transfer project data using Communication you can use USB storage device For how to use in details please see the Chapter 7 and XP Builder User s Manual 1 Recommend to transfer project by using Ethernet than RS 232C 2 For how to make Ethernet cable please see the Communication User s Manual 3 For how to transfer project please see XP Builder User s Manual 4 eXP40 TTE is not support Ethernet 24 CS Chapter 3 Standard Specification Chapter 3 Standard Specification 3 1 General Standards XGT Panel general standard is as follows Ambient operating C 50 C temperature Stora i C 460 C temperature O O O Storage humidity 10 85 RH non condensing Occasional vibration Frequency Amplitude S Operating 10 85 RH non conde
34. bout the password can t be red because of the device error If this symptom is repeated contact Customer Service Center When saving the project the password inputted by user is not same as present connection password Input correct password and save the project There is version information file but when it cant read file normally because of the device error downloading is stopped because it doesn t know version If this symptom is repeated contact Customer Service Center The version of XP Builder where project is saved is not compatible with present XGT Panel Update the XGT Panel The version of XP Builder where project is saved is not compatible with present XGT Panel Update the XGT Panel There is storage structure version information file But when it can t read this file because of the device error downloading is stopped because it doesn t know the version If this symptom is repeated contact Customer oervice Center Data storage type is not correct Update XGT Panel Appendix 1 Troubleshooting j Error message Type Address location Download data format version is not matched Please update XP Builder Ox5A XGT Panel Ox5B XGT Panel Data file path is invalid Download file name Ae 0x5C Cannot find download XGT Panel file 0 5 Download file size is XGT Panel invalid Ox5E Cannot find project one Ox5F Project backup
35. curred Show communication error window C After current display list Sound a buzzer 2 As the eXP model has the integrated LCD and backlight the LCD should be replaced when the life is over or it has damage Chapter 12 EMC Standard Certification In M Chapter 12 EMC Standard Certification 12 1 Requirement for EMC Standard Certification EMC command is regulated on It doesn t produce the Strong electromagnetic waves Emission and It is not affected by electromagnetic wave from external Immunity The following is describing the contents to meet the EMC command when configuring the system by using the XGT Panel This is a summary document for the request and standard which our company has obtained from EMC but we dont assure that all devices manufactured according to these contents are not suitable for the below standards The final manufacturer needs to finally judge about the fitness method or fitness judgment of EMC command 12 1 1 CE standard certification In case of XGT Panel the EN61000 6 4 EN61000 6 2 EN61000 3 2 and EN61000 3 3 of CE standards were applied 1 Emission Conducted Disturbance 61000 6 4 2007 Radiated Disturbance EN61000 6 4 2007 Harmonic Current Emission Voltage Change Fluctuations and Flicker EN61000 3 3 2008 2 Immunity EN61000 6 2 2005 EN61000 4 2 2009 EN61000 6 2 2005 EN61000 4 3 2006 A1 2008 EN61000 6 2 2005 EN61000 4 4 2004 EN61000 6 2 2005 EN61000
36. d judgment of suitability should be finally made by device manufacturer himself 12 2 1 Standard certification for XGT Panel XGT Panel is according to the EN61 131 2 2007 stability of device used in the measure control laboratory 12 2 2 Selection of XGT Panel 1 eXP40 TTA E DC eXP60 TTA DC The I O module under DC12V exceeds the range of low voltage command target 12 2 ES Appendix 1 Troubleshooting 5 M Appendix 1 Troubleshooting 1 1 Type of Problem It classifies problems from XGT Panel including an indicated figure indication of the object and problems appeared when downloading Refer to the following chart Problem when starting Malfunction when starting Please refer to the 2 Problem when starting Problem when touching In case that there is no reaction when touching gt Please refer to the 3 Reaction problem when touching Display problem of figure and In case that the figure or object is different from when editing object i Please refer to the 4 Indication problem of figure and object Communication problem In case that communication is not executed properly gt Please refer to the 5 Communication problem USB Removal of Memory In case that USB device is not working for a while when USB memory is removed Card i Please refer to the 6 USB Removal of Memory Card Error message when In case that an error message occurs when operating the XGT Panel executing program gt Please refer to th
37. e Update exe 0x06 XGT Panel XGT Panel 0x30 XGT Panel Failed to modify password file Password related XGT Panel command transmission payload error XGT Panel There B no connection setting file Modified content can t be XGT Panel saved in the XGT Panel connection setting file XGT Panel XGT 0x31 Communicatio n between other XP Builder XGT Panel 0x32 0x33 0x34 Failed to set the time Failed to Create Initialized Module Version File XGT panel SW update 0x21 Panel XP Builder Occurrence Error message location Reason and measure In the present XGT Panel the new updated XGT Panel software s name can not be changed After rebooting the XGT Panel update again When rebooting if you can t start engine delete FlashDisk LSISProduct UpdateNew exe in the XGT Panel Then if you touch Update exe and execute the XGT Panel it can be update mode Try update again If this symptom 15 repeated contact Customer Service Center The new module is downloaded by the XGT Panel update but the previous module is not deleted Reboot the device If the XGT Panel software is not started normally touch FlashDisk LSISProduct Update exe in the XGT Panel At this time if XGT is set as update mode update again If this symptom is repeated contact Customer Service Center The device connection password can t be modified because of error of Flash Disk of XGT Panel Rebo
38. e gaps As such problems can occur depending on the thickness and material steel aluminum acrylic and etc of the panel it is required to review the installation environment Also it is necessary to check if Gasket and the panel are closely contacted together 3 When Gasket is contaminated or damaged by the deterioration after the use for a certain period of time the waterproof dustproof effect can be noticeably weakened In case when Gasket should be replaced contact the agency or a sales office close by 3 Installation location e When installing the XGT Panel consider screen and use of touch e When you dont see within the following angle you may not see clearly When installing consider angle Wem LefandRight Upper _ eXP40 TTA EVDC 60 deg 40 deg 60 deg eXP60 TTA DC 55 deg 35 deg 55 deg 4 Fixation e Fix Panel to the panel using the supplied brackets provided in the OEM packaging Panel Affix using supplied brackets Affix Using N f ffe P supplied brackets a Affix Using g 3 supplied brackets N Affix using supplied brackets 10 4 LS Chapter 10 Installation and Wiring Remove the protection film attached to the front of this machine Due to the deformation of the protection film the touch malfunction or wrong input can occur It is recommended to use a special protection sheet to protect the front sheet In case of purchasing the protect
39. e 7 Error message when executing program LSIS p14 Appendix 1 Troubleshooting 1 2 Problem when Starting Why does black screen show up when turning on the device Phenomenon When turning on the device black screen shows up and the booting is impossible lt Cause gt 1 Because the device is not set as a booting mode 2 Black screen may appear because of malfunction of backlight lt Solution gt 1 Because the device is not set as a booting mode the above problem can occur Check whether No 5 switch at DIP switch in the back of the device is in B direction or not B direction is a booting mode When the color of LED changed Please check the followings BLUE Power is supplied to XGT Panel When applying the option Go to Screen after boot up it displays Failed to load image files as the monitoring has not been started Phenomenon After storing images in the USB storage device and then selecting the option Go to Screen after boot up in the start menu in case when re permitting the power of the equipment the message like Failed to load image files is displayed and the monitoring is not started Cause 1 In case when it is connected with the USB storage device the recognition of the USB is delayed lt Solution gt 1 Incase when the recognition speed 15 delayed due to the characteristics of the USB storage device remove the USB storage device and then reinstall it
40. e project should be saved in the one lower directory between those directories 3 If you touch OK button the device is updated with XGT Panel Software in the designated path 7 4 Chapter 8 XGT Panel S W Update n Chapter 8 XGT Panel S W Update 8 1 General Introduction It describes the function for updating the XGT Panel software Basically you can optimize XGT Panel when you download the project file in XP Builder Please use this function only in case of updating XGT Panel specially New function is added to XGT software you need to update a version of XGT Panel Please refer to the following Method Select Upgrade gt Update XGT Panel on the XGT Panel s main screen Then XGT Panel becomes update mode In order to return to the main screen touch a MENU button or touch the screen for 3 seconds LSIS XGT Panel XGT Panel Update don t turn olf 0 Settings 9 Diagnostics Please update EGT Pane PLC Information Update XGT Panel 1 D Storage Function Start WinCE O S V1 016 XP Runtime V1 33 B 105 Punting V1 33 B 105 om After downloading XGT Panel software from LSIS website make a temporary folder and save it Designate the folder where the software will be saved in the XP Builder s XGT Panel Update windows and update XGT Panel by Send menu For more detailed information about XP Builder please refer to the XP Builder user manual Remark Do not
41. ection Status 6 1 PLC Communication Configuration Settings cccccscscssesssssscseessesecseeseesseseessessassaesoeseeesaeseesessaesaeseseassaeseneeeteaees 6 2 6 2 Connection Infomation ERR RR RR 6 3 IE aie anc ire RR E 6 4 6 4 History Of PLO m AAO AE 6 4 of PLC Mogo 6 5 sisdm ciendoBEOXLe M HH 6 5 En 6 6 CIN 6 7 MORO lpn ccc cnc ctr lp heh ccc pct cs 6 8 Chapter 7 Storage Function FANE n Maire o Ure o p ERR 7 1 7 2 Downloading Project through the Storage Equipment eese nennen 7 2 7 3 Uploading Project through the Storage Equipment ccccccscssesssssscsecssesessesseeseeseesesseeseeseeseessaesaeseeseassaesenseeseaees 7 3 7 4 Updating the Device through Storage 7 4 Chapter 8 XGT Panel S W Update 8 1 General Introduction 8 1 Chapter 9 File Backup through External Storage Equipment 9 1 Path
42. eleted files are user project file web data files server VNC start module option card driver RAPIEnet communication setting data XP manager setting data and etc Setting through Environment Setting menu of device is not initialized If the menu is not in English it is necessary to reboot device to delete the multilingual related files Chapter 4 System Configuration E If you select the image through Set Background Image background image of waiting screen is set as the selected image If you want to cancel press Delete Background Image Select Folder Select Source USB USB Storage 24BIT BMP Set Background Image Use boot image Background Image Selection Screen Use boot image With an option selected you cannot use it unless it is the image of different resolution from that of XGT Panel or 24 bit image 48 ES Chapter 4 System Configuration If there is no printer information displays the following message and must downloaded from the XP Builder You can prepare your download then go to the Start menu in XP Runtime and use the menu after using the printer settings from XP Builder HMIManager AN Printer driver is loaded Please download project files Printer driver and Information None Download Required Printer Setting Port LIS Printer type LaserJet Print direction Horizontal amp Vertical Print color True Color Mon
43. enter When downloading the alarm history in the NV RAM is initialized in case of selecting the previous project s monitor data deletion option By the way in case of failing this downloading is stopped If this problem is repeated contact Customer Service Center The downloaded font file is moved into original storage location but when this fails downloading is stopped If this symptom is repeated contact Customer Service Center Error code Object 0x18 XGT Panel XGT Panel XGT Panel XGT Panel XGT Panel XGT Panel XGT Panel XGT 0x19 Ox1A Ox1B Ox1C Ox1D Project Ox1E download Ox1F Panel XP Builder XGT Panel Project download from USB storage device 0 51 Oocurrence Error message location Failed to install font files Please download project again Failed to unmarshall download file Please download project again Failed to install new project data files Please download project again Failed to merge data files Please download project again Failed to save new project archive Please download project again Failed to XGP Panel startup program Please update XGT Panel Software Project data is not downloaded Please download project again Failed to read Version information file Please download project again Cannot find project data in USB Storage Appendix 1 Troubleshooting Reason and measure The project data is divided in
44. er if you select this option first screen shows slowly Especially if there are many animation objects in screen it may take several seconds based on image But fast screen switching is available since second screen switching If XGT Panel start monitoring by touching the Start on the main screen and the buffering images used in your project You will see the progress of the job If you do not show the Quick start setup In this case if the Show progress on the bottom check box is checked while this progress is displayed at the bottom of the screen to a more simplified state If you used the default screen background image you can try to apply this option Chapter 4 System Configuration Show always title bar of It indicates title bar on pop up window With title bar of pop up window selected it may popup window move the location The menu bar basically provided to go out from monitoring screen to the waiting screen Do not show menu bar doesn t show In this case if you want to go out to the waiting screen you have to use the special switch to close the monitoring screen Enable Arabic text display right gt left It enables the language indicated from right to left directions The screen that corresponds to the number entered at the start of the monitoring is Set startup screen displayed first After the screen has been moved to another page the mouse cursor does not appear Buzzer On Off You c
45. erted onto the mother board or base unit vO Unit A single module or group of modules that perform an independent operation Ex Basic unt as apart of PLC system Extension unit PLC system System consisted of PLC and peripheral device which can be controlled by user program Software used to write and edit the project It is the software for edition download monitoring to realize data XP Manager communication between XGT Panels through XP Link with online control function Software used to remote monitor and control the XGT Panel EM FEnet module Fast Ethernet Network RT Abbreviation of Real Time Clock It is used to call general IC that contains clock function 1 6 LS Chapter 2 System Configuration Chapter 2 System Configuration Characteristic of each eXP series and its system configuration are as follow 2 1 Part Names 1 eXP40 TTE DC eXP40 60 T TA DC n J 1 J d OTIL i bem 2 tems PartNemes 0908908 1 Analog Touch Panel Input by user s touch Entra 2 LCD Screen indication amp j PwelED PowerLED Indicating the stateofpowerOn the state of power Indicating the stateofpowerOn 1 Logging Recipe Screen Data Backup USB Device 2 Send project data and XP Run time 3 Receive back data and project file amp Pane Panel Mounting Part Part Panelonthepanelusingbracket Panelonthep
46. es 2 Path structure in case of recipe backup 1 Directory named Recipe is created under USB storage equipment root directory 2 Year month directory is created under Recipe directory 3 The lower directory structure is same as that of logging backup path structure 4 Name of recipe backup file includes the created hour minute second information a Backup file is created in CSV format b File name start with R indicating recipe and includes hour minute second index information c In case backup file is created at the same time in terms of second index information at the end of file name increases 3 Path structure in case of screen backup 1 Directory named Screen Image is created under USB storage equipment root directory 2 Directory whose name is year month is created under Screen Image directory 9 2 LS Chapter 9 File Backup through External Storage Equipment Mu 3 The lower directory structure is same as that of logging 4 Name of screen image backup file includes hour minute second information a Backup file is created in bitmap format b File name starts with S and includes hour minute second index information c In case backup file is created at the same time in terms of second index information at the end of file name increases 4 Structure of path at memo backup 1 Memo directory will be formed at the sub route directory of USB storage device
47. g and etc files by using storage devices Chapter10 Installation and Wiring It describes an installation wiring and caution for reliability of PLC system Chapter1 1 It describes inspection category and method for long normal operation of PLC system Chapter12 EMC Standard It describes system configuration for EMC standard Appendix 1 Troubleshooting It describes a variety of error contents and measure Appendix 2 Dimension It describes the dimension of XGT Panel Warranty and Chapter8 XGT Panel SW Update It describes the way to update engine at XGT Panel Transmission of Project Chapter7 from USB Storage Device It describes the way to execute the project by using USB CF SD storage device This manual doesn t describe connection with XP Builder and PLC For their own function Please refer to the related manuals Chapter 1 General Introduction Panel series has the following features 1 Various types of external interface a Supporting various device of USB Ethernet it maximizes the customer s usability Status LED when power on LED light up BLUE USB DEVICE project download through XP Builder Various communication connectors are placed at the lower side so that it can be connected in a variety of types with the control device such as PLC inverter etc Through RS 485 RS 232C RS 422 485 Ethernet 10Base T 100Base T X communication it can be connected with control device Battery Cover Bat
48. he Panel s basic screen the menu for diagnosis shows up LSIS XGT Panel Q Settings PLC Information 0 Update XGT Panel OStorage Function WinCE O S V1 016 XP Runtime V1 33 B 105 Main Screen Diagnostics DScreen 0 Touch Backup Memory Flash Memory USB Memory sr Goto MainMenu Diagnostics setting screen LS 15 15 1 Chapter 5 Diagnostics E 5 1 Screen Diagnosis If you press Screen button screens continuously change into diverse color with buzzer After all screen for diagnosis pass Then Close button shows up with white background If you press Close button the initial screen shows up Diagnostics Backup Memory Memory USB Memory Serial Goto MainMenu Diagnosis screen Screen diagnosis Display RED gt GREEN gt BLUE gt BLACK gt WHITE gt GRAPH Sequence Chapter 5 Diagnostics 5 2 Touch Diagnosis If you touch the screen the touched location is displayed as follows If pressing the OK button you can quit the screen Diagnostics Screen DBackup Memory orn Memory DUSB Memory Goto MainMenu Touch diagnosis If the touched location is not correct reset the Touch setting For detailed information please refer to the Chapter 4 2 Touch Calibration Chapter 5 Diagnostics 5 3 Backup Memory Diagnosis If you press Backup Memory button you can see
49. hen there is no proper vector image the desired image can be composed by using various functions of figures circle square straight line and etc 3 Removing unnecessary background screen the screen is composed by applying the background colors 1 4 Display Problem of Figure and Object The shape of object is not shown or the number or character value which has to be shown is not shown Phenomenon The shape of object is not shown or the number or character value which has to be shown is not shown Cause 1 The connection with PLC connected with each project is disconnected or NAK occurs lt Solution gt 1 When the communication is executed at first Check the cable connected with PLC is OK or not 2 If object where the offset is set is not shown check whether address range is exceeded or not 3 In case that communication is not OK when communication is abnormal the following message shows up in the XGT Panel Object type Bit Switch The switch is expressed but it doesn t work Word Switch The switch is expressed but it doesn t work Change Screen Switch The switch is expressed but it doesn t work Special Switch The switch is expressed but it doesn t work Multi Switch The switch is expressed but it doesn t work Bit Lamp Image is not shown Word Lamp Image is not shown A14 L S Appendix 1 Troubleshooting Object type N State Lamp Image is not shown Bit Message Word Message Numer
50. homepage etc copy UpdateNew exe file among new module to the FlashDisk LSISProduct directory of Panel through the movable storage equipment Then reboot the XGT Panel and go update mode and update again If this symptom is repeated contact Customer Service Center 1515 Apo1 19 Appendix 2 Dimension Appendix 2 Dimension Unit mm 1 eXP40 TTA DC eXP40 TTE DC 191 5 eXP40 TTA DC 166 5 eXP40 TTE DC 1515 2 1 Appendix 2 Dimension 2 eXP60 TTA DC 218 0 5 Me 2 25 Appendix 2 Dimension 1515 An02 3 Warranty and Environmental Policy 1 Warranty Period The product you purchased will be guaranteed for 18 months from the date of manufacturing 2 Scope of Warranty Any trouble or defect occurring for the above mentioned period will be partially replaced or repaired However please note the following cases will be excluded from the scope of warranty Any trouble attributable to unreasonable condition environment or handling otherwise specified in the manual Any trouble attributable to others products If the product is modified or repaired in any other place not designated by the company Due to unintended purposes Owing to the reasons unexpected at the level of the contemporary science and technology when delivered Not attributable to the company for instance natural disasters or fire 3 Since the above warranty is limi
51. ic Display Numeric input Text Display Text Input Bit Window The window screen set in the object is not shown But if communication is set with other object in the same window screen it can be shown by that object The window screen set in the object is not shown But if communication is set with other object in the same window screen it can be shown by that object The part screen set in the object is not shown But if communication is set with other object in the same part screen it can be shown by that object The part screen set in the object is not shown But if communication is set with other object in the same part screen it can be shown by that object Animation Animation is not shown Bar Graph Graph is not shown When designating the background image image is shown as it is Pie Graph Graph is not shown When designating the background image image is shown as it is Word Window Bit Part Word Part Meter Graph Graph is not shown When designating the background image image is shown as it is Closed Graph Graph is not shown When designating the background image image is shown as it is Trend Graph X Y axis is shown normally but trend axis is not normally shown When designating the background image image is shown as it is Change doesn t occur When communication is abnormal alarm occurs because it can t know the status of alarm target device But previous alarm data shows up as it is Data list Logging Viewer Cha
52. ight Do not install at the place where rapid temperature change can occur Moisture by rapid temperature change can cause malfunction and damage e This machine should be installed within 0 50 otherwise the screen may be changed or cause malfunction f This machine should be installed within 10 85 relative humidity Moisture by rapid temperature change can cause malfunction and damage g Avoid corrosive gas and burnable gas 2 Installation construction a When doing screw s processing or wiring construction be careful that the remains do not enter the Panel inside b Install at the place where you can easily control c Do not install with high voltage machine within same Panel d Keep distance of more than 100mm from duct for wiring and peripheral machine e Ground at the place where few noises develop 3 Anti heat design of control panel a In case of installing XGT Panel in the airtight panel consider the heat by other machine as well as own heat In case that the air circulates through a ventilating opening or a general pan XGT Panel system can be influenced by in draft of dust or gas 0 We recommend you to install a filter or to use an airtight heat exchanger 1 Waterproof amp dustoroof standards a IP65 Standards 1 The protection standards of XGT Panel have been designed to meet the IP65 test conditions in accordance with the degrees of protection provided by enclosures of IEC60529 As this machine
53. ing temporarily conduction due to condensation 3 2 LS Chapter 3 Standard Specification 3 2 Function Standards eXP Series function standard is as follows eXP40 TTE eXP40 TTA eXP60 TTA Display type TFT color LCD Screen size 17 8cm 7 25 9 cm 10 2 Display Resolution 800 x 600 pixel WVGA Color indication 16 bit Color 65 536 color Left Right 60 deg Left Right 55 deg Indication degree Upper 40 deg Upper 35 deg Lower 60 deg Lower 55 deg Brightness 230cd m 200cd m Audo Process Operating RAW Ethernet Pe 1 channel IEEE802 1a 10Base T 100Base TX Memory 1 channel USB 2 0 host USB mouse keyboard printer and USB memory driver is available 1 channel USB 2 0 device for download and upload project file 2 channels RS 485 RS 232C DSUB 9 Male Type 1 channel RS422 485 mode Terminal Type express 12 kinds of language RS 485 RS 232C RS 422 485 Multi language Animation GIF format is available Recipe available Data logging available Script executor available Certifications CE UL cUL KC Protection standard IP65 208 0 x 154 0 x 44 4 192 0 x 138 0 2 6 0 x 218 0 x 44 4 260 x 202 0 Dimension mm Panel cut mm Rated voltage DC24V 03 IN Power consumption W 3 Weight Kg 0 3 3 Chapter 3 Standard Specification E A1 dM O 1 Caution in power connection With AC power applied to DC power device it may cause
54. ion sheet contact the agency or a sales office close by 5 Removal of protection film e The film attached to protect the front sheet when this machine has been released should be removed after it is installed in the panel 1 During installation XGT Panel should be closely contacted to the panel not to have any gap In the environment requiring waterproof dustproof effect install and fix a bracket on a slope 2 The bracket should be fixed symmetrically up down left right In case when it is not fixed symmetrically there could be a gap between the panel and XGT Panel 3 When fixing the bracket it should be installed perpendicularly to the panel and the required bracket screw torque is 0 66Nem Depending on the material type of the panel the torque value can be different The standard screw torque for each bolt size is followed If it is fixed with the power more than the required screw torque the touch malfunction or weakening of waterproof dustproof can happen due to the deformation of XGT Panel 10 2 XGT Panel Wiring Specifications It describes the wiring that you should know when installing the XGT Panel 10 2 1 Power Wiring eXP models are DC type X PowerType O eXP40 TTA E DC eee eXP60 TTA DC Caution Do not use an AC power supply for an XGT panel designed for a DC power supply An incorrect power supply could result in serious equipment damage or fire gt Confirm the power sup
55. it to send Use PLO simulator Iw Program monitor 6 8 65 Chapter 7 Storage Function 7 O U Chapter 7 Storage Function 7 1 General Introduction Downloading the user project made in XP Builder from PC uploading the project stored in the device to PC updating the device and etc are available through connection with XGT Panel with Serial cable or Ethernet cable generally However when those connections are not available you can use USB storage equipment LSIS XGT Panel Settings Diagnostics PLC Information 0 Update XGT Panel 0 Storage Function WinCE O S V1 016 XP Runtime V1 33 B 105 1 If you touch Storage Function the following dialog box shows Storage Function 2 In case of downloading the project by using USB storage equipment touch Project Download button 3 In case of transmitting the project data stored in the device to USB storage equipment touch Project Upload button 4 In case of updating the XGT Panel with XGT Panel Software stored in USB Storage equipment touch XGT Panel Update button Chapter 7 Storage Function 7 2 Downloading Project through the Storage Equipment 1 If you touch Project Download the following dialog shows Select Source USB WSB StorageXXP Project MyProject 2 Please select the targeted external memory in Select Source Following path is indicated depending on the selected external memory USB USB Storage XP Project
56. kup files of project A and B based on the created time 9 2 Operation setting when there is no space for backup You can designate in the XP Builder whether to cancel the backup or delete the oldest backup file and execute backup when there is no space in the storage equipment Project Property Setting gt Storage Settings gt Backup Storage gt Delete old file if disk full 1 In case of backup deleting the oldest data 1 In case there is no space for backup searches the oldest year month directory under Logging Recipe Screen Image But in case of Logging finds under Logging number directory That is when executing backup about Logging number 2 in case there is no backup data in Logging number 2 directory and there is data only in logging number 1 data of logging number 1 is not searched deleted 2 Searches the oldest day directory under the oldest year month directory 3 Searches the oldest hour directory under the oldest day directory 4 Deletes the oldest backup file under the oldest hour directory 5 Checks the space and if more space is necessary the above steps of 1 4 are repeated and checks the space 6 When deleting file in case all data in time directory are deleted relevant hour directory is deleted Chapter 9 File Backup through External Storage Equipment o gt 7 When deleting hour directory in case all hour directories in day directory are deleted relevant hour directory is deleted
57. l configuration PLC CPU status and various records LSIS XGT Panel Settings Information 4 gt Update XGT Panel Storage Function WinCE V1 016 XP Runtime V1 33 105 You can check the status of PLC connection after project data is transmitted into XGT Panel Ch 6 Viewing Information of PLC Connection Status 6 1 PLC Communication Configuration Settings You can select Settings button to change PLC communication settings Driver DOES COE CEP B Version 1 20 N 1 Settings SHOW INFO Close 1515 XGIJXGR XEC LINK 100 ms ho Wait to Sendims Timeout Retry Count Serial Type 45 sd Baud 38400 vw Parity NONE l DataBt 5 1 stopeift PLC Communication Configuration setting PLC Communication Configuration setting dialog box may look different depending on drivers For further information about the settings please refer to the PLC user manual 6 2 145 Ch 6 Viewing Information of PLC Connection Status 6 2 Connection Information You can check the setting items for the connection with PLC such as vender of PLC target device connection type address connection information and timeout value in the XP Builder System Contents Connection 0 Vendor LS Industrial Systems Target device xk CPU Connection 52321 Connection Infor 115200605 Ti
58. load project again Reason and measure In case that it fail to delete the sound file of previous project because of error of XGT Panel download is stopped If this problem is repeated contact Customer Service Center It cant download part or fixed part in case there is no downloaded project In case of this download again If this problem is repeated contact Customer Service Center When user change the storage location of project data including image and font if there 5 not respective routine it make newly By the way download is stopped in case it fails to make newly When it is designated as CF card it can occur in case CF card is not installed If this problem is repeated and not referred in the above contact Customer Service Center The project backup file downloaded already can be deleted because of error of XGT Panel Reboot XGT Panel If this problem is repeated contact Customer Service Center When downloading the log data area in the NV RAM is initialized in case of selecting previous project s the monitor data deletion option By the way in case of failing this downloading is stopped If this problem is repeated contact Customer Service Center When downloading the log data area in the NV RAM is initialized in case of selecting previous project s the monitor data deletion option By the way in case of failing this downloading is stopped If this problem is repeated contact Customer Service C
59. m Service Center There is no USB or device status of USB is not good or project is not saved properly 1515 Apo1 13 Appendix 1 Troubleshooting Error code Address Project download from 27 USB storage Ux device Object 0x52 Project information file is Ace not in USB Storage XGT Panel Failed to read project Information file XGT Panel Device type is not matched XGT Panel Cannot read user password XGT Panel Password 1 not matched XGT Panel Cannot read AGT Panel software version XGT Panel software is XGT Panel old version Please update XGT Panel 0x53 0x54 0x55 0x56 0x57 0x58 0x58 0x59 XGT Panel Cannot read con oad data format version Download data format version is not matched Please update Panel Ox5A A144 LS Occurence Error message location XP Builder is old version XGT Panel Please update XP Builder Reason and measure The project is not saved normally in the USB Check whether there is Project folder and project name inf in the USB or not It can t read project information file because the project is not saved in the USB normally Save the project again from XP Builder to the USB The connected device type is not same as the device type set in the project in the USB In case of this project can t be downloaded into the device Edit the project again or download according to the connected device Information a
60. meout value SO00msec Explanation of the dialogue box Ch 6 Viewing Information of PLC Connection Status E 5 3 PLC Information You can check CPU type of PLC operation mode state version and scan time Information HMI PLC Error Mode Power System Scan time max Scan time min Scan time cur XGB XBCH RUH EE v1 4 8 5 1115 0 2115 The following PLC is available for view of PLC information MASTER K CPU FEnet Cnet GLOFA GM CPU FEnet Cnet XGK XGB XGI XGR CPU FEnet Cnet 6 4 History of PLC Error You can check the PLC Error History Information The following PLC is available for viewing Error History MASTER K CPU doesnt have the Error History GLOFA GM CPU FEnet Cnet XGK XGB XGI XGR CPU FEnet Cnet Contents PLC system properly shut PLC system properly shut Module detach error Module detach error PLC system properly shut PLC system properly shut Module detach error Module detach error Ch 6 Viewing Information of PLC Connection Status 6 5 History of PLC Mode Conversion You can check the history about our PLC s RUN STOP operation mode Information Power Contents Remote stop Remote Run Remote Stop Rkemote Stop Remote Stop Remote stop Remote Stop Remote Stop The following PLC is available for viewing PLC operation mode conversion history MASTER K C
61. nel including the start of device diagnosis of device and environment setting project download monitoring of control device and error messages occur as type of box At this time the message indicates the code made by 4 digit number The front 2 number indicate code of object and work the rear 2 number is message number In case that the present error message is indicated as 0101 an error message occurs when doing diagnosis about the status of NVRAM When an error message occurs refer to the row s number and sequence and find the category of reason and measure Emorcode code Object Error message Reason and measure yee location NVRAM Data Access Failed to check whether backup memory is 0x01 XGT Panel normal or not If this symptom is repeated FAILED contact the near Customer Service Center Backup data is not valid If this symptom is BATTERY STATUS repeated when turning power off and on AOE Serra NOT GOOD remove Panel s power and exchange the battery E 08 XGT Pan Write Operation The built in Flash disk has an error Contact Device FAILURE the near Customer Service Center 0 01 Read Disk Information The built in Flash disk has an error Contact diagnosis 0x04 XGT Panel Error the near Customer Service Center Check that CF card is empty and equip CF Write Operation card and test again If same symptom is FAILURE repeated CF card or CF card slot of XGT Panel may have a
62. ng Environment Setting Ethernet Setting Z XP Remote Setting Buzzer Setting Goto MainMenu You can change IP address by pressing Set button of each IP address Subnet Mask and Gateway By pressing OK button changed IP information is reserved IP Infomation E IP Address 192 168 1 2 Set Subnet Mask 255 255 255 0 Set Gateway 0 0 0 0 Set DNS 0 0 0 0 Set MAC Address 04 03 02 01 08 09 Enable Disable We recommend the following method when connecting with PC solely 1 XGT Panel setting 2 PC setting P Address 192 168 0 10 P Address 192 168 0 11 Subnet Mask 255 255 255 0 Subnet Mask 255 255 255 0 Gateway 192 168 0 1 Gateway 192 168 0 1 If you reboot after pressing Disable button the device will not use Ethernet In this case booting speed gets faster If you use Ethernet again reboot after pressing Enable 1515 4 11 Chapter 4 System Configuration 3X 3 4 6 XP Remote Setting Settings of XP Remote that can remotely adjust XGT Panel can be changed System Configuration Backlight Setting Setting DateTime Setting e Environment Setting Ethernet Setting DXP Remote Setting 5 Buzzer Setting Goto MainMenu XP Remote Settings Allow XP Remote to connect Max of XP Remote 2 B connections Timeout value 10 second 5 Enable control by XP Remote after Monitor Start Cancel
63. nge doesn t occur When communication is normal the recorded log data is shown normally But log data is shown as when communication is abnormal History Alarm Viewer Navigator Change doesn t occur Because it shows the group of alarm already developed though communication is abnormal if it has alarm data already developed it shows the name of group where each alarm is included The number indication object value is shown as or Phenomenon The number indication object value is shown as or Same phenomenon occurs at the number input device viewing data list and viewing logging lt Cause gt 1 This happens when digit is not correct or type is not BCD lt Solution gt 1 When the number to be expressed exceeds the number set in the object is expressed In case of this set the digit largely and after download again execute program again 2 When the numeric display object is expressed as BCD type the data whose type is not BCD is expressed as In case of this adjust device value as BCD type LS App15 Appendix 1 Troubleshooting 2 3 This phenomenon occurs at the data list object numeric input numeric display device and logging viewer After switching the screen the previous screen remains for a few minute Phenomenon After switching the screen when there is no background or image in the part or number indication device the previous screen remains for a few minute beca
64. nsing EN 9 lt lt 150 Hz co 3 A N co T N Vibration resistance Continuous vibration 10 times each in X Y and 41 61131 2 direction Frequency Amplitude sen m p Maximum shock acceleration 147 ms 15G Duration time 11 ms Pulse wave half sine pulse 3 times each in X Y and Z directions LSIS Square DG 1 Impulse noise otandard Electrostatic IEC 61131 2 discharge 4 kV Discharge by contact Immunity Nose Radiated Immunity electromagnetic 80 1 000 MHz 10 field noise Category Power module Communication interface 61131 2 Category ast transient 61000 amp Burst noise r 3 RIA C co ol N Shock IEC 61131 2 endurance Chapter 3 Standard Specification 8 Environment Free from corrosive gases and excessive dust EN Operating 2 E height a degree AN Cooling method Self cooling Remark 1 IEC International Electro technical Commission International private group facilitating international cooperation of electric electronic standardization issuing international standards and operating the compliance evaluation systems 2 Pollution degree As an index representing the pollution degree of an environment to determine the insulation of a device pollution degree 2 generally means the status generating non conductive contamination However it also contains the status generat
65. o Printer Settings near ene Test Page lt The printer driver is ready to use gt ES 1514 9 Chapter 4 System Configuration Specifies whether the advanced printing More More Properties Displays additional properties If you change the additional printer properties check the information in the dialog After that press the OK button to save settings O To save the settings To cancel the setting Printer Check To diagnose the connection status of the printer This feature is only supported Sewoo printer LK P30 LK P41 LK P43 Press the button to display the current printer status Please mount again the printer cable if the printer is already powered with the cable connected Messages Printer Settings 1 OK Normal state Dialog 2 No Printer Not connected to the printer 3 Cover Open Paper cover is open 4 Paper Empty Out of paper Test Page This function is designed to test the print output status Outputs the following information and it briefly shows the current print stat Test page DateTime 2014 02 04 10 00 00 XP Runtime version 1320 Printer driver version 1 00 Printer name PCL3 LaserJet Port USB 4 10 115 Chapter 4 System Configuration O M 4 5 Ethernet Setting If you press Ethernet Setting button in System Configuration screen as follows you can change IP to use Ethernet System Configuration Backlight Setting Touch Setting DateTime Setti
66. ot the device If this symptom is repeated contact Customer Service Center It failed to set and modify password because of communication status error If this symptom is repeated contact Customer Service Center The connection setting file of Panel can t be found The modified information can t be saved at the connection setting file of XGT Panel If this symptom is repeated contact Customer Service Center The XGT Panel s time can t be set If this symptom is repeated contact Customer Service Center Because the each module version information can t be read because of Panel s error it failed to initialize If this symptom is repeated contact Customer Service Center 1515 4147 Appendix 1 Troubleshooting XP Builder XP Builder Object Occurrence location XGT OO 0x22 Panel Module version file size 15 invalid XGT 0x23 Panel Can t Read module version file 0x24 XP Builder There s no file to download Downloaded file is not Module to download 0 26 XGT Panel XGT Panel 0 28 XGT Panel XGT panel 0 27 S W update on A118 LS Not enough space in flash memory Failed to Copy module dll Failed to Start Engine Please update engine again Reason and measure The each module version information can t be read because of Panel s error If this symptom is repeated contact Customer Service Center The each module version information can
67. ows you can set Auto Goto Screen and Buzzer On Off System Configuration Backlight Setting Touch Setting DateTime Setting Environment Setting 1 Ethernet Setting XP Remote Setting Buzzer Setting Goto MainMenu Environment Settings Screen General BK Image Printer Quick start Show progress on the bottom Show always title bar of popup window Do not show menu bar Enable Arabic text display right gt left Set startup screen Environment Settings Buzzer test vi Reset USB power after boot up Low Memory Made Clear SRAM mernory and data files LCS 1514 5 Chapter 4 System Configuration Environment Settings Screen General BK Image Printer Delete backaround image Environment Settings Screen General BK Image Printer Dialog box explanation Environment setting screen Explanation Go to screen after boot up Quick start Show progress on the bottom When setting Auto Goto Screen XGT Panel is rebooted Or when downloading the edit data is completed the screen automatically shows up If you cancel this setting the user should press Start button in order to move to the screen When starting screen screen shows promptly without showing progress bar because it doesnt caching the image in advance Howev
68. ply by checking the power supply ratings on the rear panel of the XGT Panel L5 10 5 Chapter 10 Installation and Wiring gt o The power terminal should have the following specification Cable Specification unit Power and protection ground 1 5 AWG16 2 5 AWG12 1 For installations where there is voltage drop it is recommended to use stranded wire with a cross sectional area greater than 2 2 It is recommended that cable connections are twisted and secure Short cable runs are also recommended between the point of supply and the XGT panel 3 For safety reasons it is recommended that you use color coded outer sheaths on the conductors to aid safe terminations Connect the power supply as shown below Power Supply DC Power connection 1 Use a regulated power supply transformer when the power fluctuation 5 bigger than the standard 2 If electromagnetic interference is experienced or expected use an insulation transformer to protect the XGT panel from interference 3 PS2 DC power supply recommended to use for stable data backup when power On Off PS2 severity level meets 10ms voltage interruption time 10 6 LS Chapter 10 Installation and Wirin Separate the XGT Panel power from the I O device and main circuit device HMI Power Separate the XGT Panel power supply cable from the main circuit cable high voltage and current and inpu
69. problem Check that CF card is empty and equip CF Read Disk Information card and test again If same symptom is OKOS avid Error repeated CF card or CF card slot of XGT Panel may have a problem A18 LS Appendix 1 Troubleshooting Error code Oou Error message Reason and measure Type Address location You inputted the wrong time which is not Invalid timeout value within backlight setting time range Input the effective time There is no setting information data of XGT Not found XGT Panel Panel If this symptom is repeated when configuration file turning power off and on contact the near Customer Service Center When setting IP the values within 0 255 are effective Input the value within the above range Now there is no downloaded project so you No project in XGT Panel can t see connection information Download the project from XP Builder Because of update error or Flash disk error program can t be executed If you can update redo the above procedure If you can t contact the near Customer Service Center There is password in the each object When editing the project downloaded in the present device input the designated password at the project property information Because of communication error the value Can write Data cant be inputted Check the communication status and input again You tried to input with no value Input the value E hem XGT Pane You exceed the maximum length to input
70. product damage or fire Please pay a special attention to connection 2 FG Connection For the device FG please use 7 FG terminal in the Chapter 2 1 3 Battery discharge prevention DIP switch In order to prevent the battery discharge turn off the DIP switch No 1 To use backup function please turn on DIP switch No 1 4 Battery Operation and Life Battery is used for RTC date time when the power of device is Off Battery is not consumed with power applied 5 LCD Backlight Replacement Please replace LCD if you want to replace LCD backlight 6 Protection standard XGT Panel is designed by IP65 Standard in front parts Ingress Protection IP is based on the IEC 60529 Standard for degrees of protection provided by enclosures But XGT Panel does not guarantee from all installation environment When installing panels make sure that dust and moisture are not brought in For more details on installation See Chapter 10 installation and Wiring 34 LS Chapter 4 System Configuration Chapter 4 System Configuration It describes the system configuration including Panel s time setting Ethernet connection setting and connection with PC and Backlight If you press Settings button in XGT Panel s basic screen you can set Panel s environment as follows LSIS XGT Panel PLC Information 0 Update XGT Panel 0 Storage Function WinCE O S V1 016 XP Runtime V1 33 B 105 Main screen Sy
71. s removed when doing data backup Solution 1 If possible when monitoring XGT Panel do not remove the memory card and after going out to the waiting screen execute the removing 2 Inescapably you have to remove it during the operation remove when backup does not occur If the above phenomenon occurs it works normally after about 10 seconds 3 In case of USB memory please remove it when the LED of USB external memory is not flickering After the repeated attachment detachment of the USB storage device it is not recognized Phenomenon It can happen when the attachment detachment of the USB device is repeated for a short period of time 1515 17 Appendix 1 Troubleshooting 7 lt Cause gt 1 When the USB device is recognized or removed it takes a certain period of time maximum a few seconds to recognize it When the storage device is quickly installed removed however it cannot be normally recognized lt Solution gt 1 It recognized again after waiting for about a minute Install it again after waiting for more than a minute 2 When removing reinstalling the USB device reinstall it after waiting for around 2 3 seconds If you force to remove the data during the storage of data in the external memory file may not be stored in anormal condition or external memory may suffer from damage 7 Error Message during Execution of Program In case that problems occur during execution of XGT Pa
72. se the common ground connection like below Other Other Other devices devices devices 3rd grounding connection 3rd grounding connection A Exclusive ground Best B Common ground Good C Common ground Poor 4 Use cables for grounding earth connections by using cable with a cross sectional area greater than 2 0 Install the ground connection as close as possible to the XGT Panel Check and test the grounding connection If the connection is bad or in case of above the XGT Panel may malfunction or the communication signals may fail 10 8 L S Chapter 11 Maintenance Chapter 11 Maintenance To keep the XGT Panel best examine the XGT Panel 11 1 Maintenance Because an error may be developed by environment the periodic maintenance is needed You should check the following categories once or twice every 6 months Within the power change range Modify the source of electric power in order to be in the Power Me as Within 15 10 fluctuation range of a permissible voltage Operatin temperature Modify the operating temperature and humidity to be proper Environment Speed 10 85 RH humidity Use the anti vibration rubber and make a count measure Getting loose of power terminal Screw the unwound terminal Getting loose of communication There is unwinding Screw the unwound terminal connector Amount of reserved part and Reserved part reservation Refill the insufficienc
73. sed T Delete old file if disk full Video capture image Not used Delete old file if disk full In order to use this monitoring function you have to set about system alarm window and then the project should be downloaded Project Property Summary Panel Settings Screen Settings Security Settings Key Window Settings Language Storage Settings Global Script Settings Auxiliary Settings Extended Controller Settings Print Direction E mail Property Direction Horizontal Vertical Use E mail function Color True Color f Mano a System Alarm Window Re eee eeeeee z ality print F Puce Alarm window pop up Screen Capture Communication Error Display Save as fili imt i cx Save as file Show communication error window Flow Alarm Display Mode Redraw at occurred After current display list LS 9 5 Chapter 9 File Backup through External Storage Equipment EOS SS In case USB storage equipment is removed during operation after setting the path for saving Logging backup file as USB storage equipment and downloading the project into device the designated system alarm HS951 0 is set In case storage equipment is equipped again alarm is reset In case USB storage equipment is removed during operation after setting the path for saving Recipe backup file as USB storage equipment and downloading the project into device the de
74. signated system alarm HS951 1 is set In case storage equipment is equipped again alarm is reset case USB storage equipment is removed during operation after setting the path for saving Screen Image backup file as USB storage equipment and downloading the project into device the designated system alarm HS951 2 set In case storage equipment is equipped again alarm is reset Internal address of the designated system alarm can be checked in XP Builder as follows Device Data Type Description 5950 0 BIT Low Battery Warning Hadhbl Invalid Data Warning sap ees Se No Recipe Backup Storage H9512 Mo Screen Backup Storage See 1899600 BIT USB Over Current Warning 5 1555 BIT Alarm Backup Storage 9 6 LS Chapter 10 Installation and Wiring Chapter 10 Installing and Wiring 10 1 Installing an XGT Panel 10 1 1 Surrounding Condition This machine has high reliability regardless environment But for reliability and stability be careful the followings 1 Environment condition a Install at the panel which can protect this machine from water and dust XGT Panel is designed by IP65 Standard in front parts and IP20 Standard in rear parts b Install at the place where impact and vibration is not continuously applied XGT Panel is designed to meet IEC standard IEC 61131 2 c Do not expose this machine to direct l
75. son and measure Abnormal send payload XGT Panel Please download project again Communication status is abnormal Check the connection of communication cable This message shows up when making it newly because there is no password setting file in the device When making it newly it is initialized with no password It make new password setting file when there is no password setting file But downloading is stopped when it fails to make this file because of device error If this problem is repeated Contact the near Customer Service Center Communication status is abnormal Route information is not correct to save project data If this problem is repeated Contact the near Customer Service Center In case that the version information file doesn t exist in the device that file is made newly In case that the device has error and fails to make that file download is stopped If this problem is repeated Contact the near Customer Service Center There is version information file In case that because of error of device it fails to read version information because the device doesn t know version download is stopped If this problem is repeated Contact the near Customer Service Center Appendix 1 Troubleshooting Error code Object 0x06 XP Builder Failed to get Project ID XP Builder Failed to read history alarm data XP Builder Failed to read CF Card information XP Builder F
76. stem Configuration Backlight Setting Touch Setting DateTime Setting Environment Setting Ethernet Setting XP Remote Setting Buzzer Setting Goto MainMenu System Configuration screen 5 15 14 1 Chapter 4 System Configuration 4 1 Backlight Setting If you press Backlight Setting button in System Configuration screen as follows setting screen shows up System Configuration DBacklight Setting 1 0 Touch Setting DateTime Setting Environment Setting 5 Ethernet Setting Ox Reno Setting R Buzzer Setting MainMenu Backlight Settings Brightness Do not turn off backlight Turn off backlight after idle time Turn off after 5 f minute s 1 300 Dialog box explanation Brightness t may adjust brightness of backlight Do not turn off backlight It doesn t turn off backlight power Turn off backlight after idle time It automatically turns off backlight if not in touch for a certain period of time It turns off backlight after a designated time unit of minute Chapter 4 System Configuration 4 2 Touch Calibration When the location is not recognized in XGT Panel Touch s scale can be adjusted in XGT Panel If you press Touch Calibration button in System Configuration the setting screen shows up If you touch five marks XGT Panel s touch location adjustment is completed System Configuration Backlight Setting
77. ster image the memory share can be reduced In the graphic library of XP Builder the image group marked as the raster image group while the image group marked as OOO the vector image group 2 In case when the monitoring is closed down due to the increase of the memory share in spite of the image change 1515 Ap013 Appendix 1 Troubleshooting 2 operation contact the A S center close by e After continuously adding projects to the screen and adding editing objects the operation speed has been slowed down Phenomenon After adding projects to the screen and also adding editing objects it feels like the operation speed of XGT Panel gets slowed down Causes 1 The amount of image used for projects is big 2 In order to increase the screen operation speed XGT Panel maintains the used images in the memory in advance oince the memory resource has limitation they cannot be maintained in the memory once the amount of image exceeds a certain limit Whenever they are needed thus they are read from the file system and then expressed on the screen This could be the reason why the screen operation speed gets slowed down Solution 1 In case of using vector image instead of raster image the memory share can be reduced In the graphic library of XP Builder the image group marked as the raster image group while the image group marked as Vi is the vector image group 2 In case w
78. t be read because of XGT Panel s error If this symptom is repeated contact Customer Service Center The version information list to update is empty Check the module folder newly designated at XP Builder and if there is no error download XGT Panel module and try update again If this symptom is repeated contact Customer Service Center The wrong file which is not in the new module list of XGT Panel is downloaded Try update of XGT Panel again If this symptom is repeated contact Customer Service Center The space to copy new module in XGT Panel is not enough After deleting the unnecessary file or backing up the previous file to the movable storage equipment try update again If this symptom is repeated after deleting contact Customer Service Center The new module is not installed because of XGT Panel s error After rebooting the device touch FlashDisk LSISProduct Update exe and set the device as update mode Then update again If this symptom is repeated contact Customer Service Center To reboot the engine is not available because of wrong file which is developed by downloading wrong module or communication error Touch FlashDisk LSISProduct Update exe and set the device as update mode Then update again If this symptom is repeated contact Customer Service Center Appendix 1 Troubleshooting Object Error message location XGT Panel Failed to write Data to Module version File
79. t because of error of Flash Disk it cant delete the directory made temporally for download because of error of Flash Disk download is stopped If this problem is repeated contact Customer Service Center In case that it fail to delete the font file of previous project because of error of XGT Panel download is stopped If this problem is repeated contact Customer Service Center In case that it fail to delete the image file of previous project because of error of XGT Panel download is stopped If this problem is repeated contact Customer Service Center 515 1 Appendix 1 Troubleshooting Error code Address Object OxOE XGT Panel XGT Panel XP Builder XGT Panel XGT Panel XGT Panel XGT Panel XGT Panel OxOF 0 10 0 11 0 12 0 15 Project download 0 16 0 17 A112 LS Occurence Error message location Failed to delete Sound File Please reboot XGT Panel There s no downloaded project It needs to download whole project Backup path is invalid Please check the path that project is downloaded Failed to delete previous project archive Please reboot XGT Panel Failed to delete past project data files Please download project again Failed to initialize LOGGING area in NV RAM Please download project again Failed to initialize RECIPE area in NV RAM Please download project again Failed to initialize ALARM area in NV RAM Please down
80. t output cable Maintain a minimum separation of 100mm between cables Use a lightning surge protector to prevent damage from lightning strikes Surge absorber to prevent the lighting 1 Separate E1 the ground connection for lightning surge protector and E2 the ground connection for XGT Panel 2 Set lightning surge protector to below the allowable surge voltage to provide protection if the voltage increases to its maximum L5 10 7 Chapter 10 Installation and Wiring Use an insulation shielding transformer or noise filter when the electromagnetic interference occurs Keep the stripped ends of the terminated cables twisted and as short as possible When running the wiring avoid running the cables for the insulation shielding transformer or noise filter pass through the cable duct When you use the magnetic lighting contactor MC for AC DC it is recommended to use a ferrite core close to the power terminals as shown below e 2c Ferrite core CU1330B E TECH CU1330G E TECH ZCAT3035 1330 TDK 10 2 2 Ground Wiring 1 Our XGT Panel has enough anti noise measure so except that there are many noises specially the ground is not needed When you use the ground connection refer to the following information 2 Use the exclusive ground connection When you install the ground connection use the third grounding resistance less than 1000 3 If you cannot use the exclusive ground connection u
81. ted to HMI unit only make sure to use the product considering the safety for system configuration or applications Environmental Policy LS Industrial Systems Co Ltd supports and observes the environmental policy as below Environmental Management About Disposal LS Industrial Systems considers the environmental preservation as the preferential LS Industrial Systems PLC unit is designed to protect the environment For the disposal Industrial Systems use the reasonable endeavors for the pleasurably environmental preservation of the earth cover from the product as they are reusable management subject and every staff of LS separate aluminum iron and synthetic resin Bs LS values every single customers Quality and service come first at LSIS Always at your service standing for our customers www lsis com LS 10310001449 m HEAD OFFICE m LSIS Chengdu Office _ Chengdu China LS tower Hogye dong Dongan gu Anyang si Gyeonggi do 1026 6 Address 12FL Guodong Buiding No 52 Jindun Korea http www Ilsis com Road Chengdu 610041 P R China Tel 82 2 2034 4870 Fax 82 2 2034 4648 e mail cshwang lsis com Tel 86 28 8612 9151 9226 Fax 86 28 8612 9236 e mail comysb lsis com m LSIS Tokyo Office Tokyo Japan m LSIS Qingdao Office _ Qingdao China Address 16FL Higashi Kan Akasaka Twin Tower 17 22 Address YinHe Bldg 402 Room No 2P Shandong Road Akasaka Monato ku Tokyo 107 8470 Japan Qingdao Ci
82. tery DIP Switch RS 422 485 Control device that can be communicated such as PLC Power Terminal Composed of power input and FG terminal j _ unii i CL D Ua HC imil M USB HOST icin LI M Data Backup Ethemet Project downloads through XP Builder alarm logging recipe etc RS 232C Control device that RS 485 Control device that Project data storage Control device that can be communicated image upload project etc Mouse kevboard and printer can be communicated such as PLC can be communicated such as PLC such as PLC Connected with fieldbus and open network 1 2 15 Chapter 1 General Introduction 2 Based on Windows CE a Adoption of Microsoft Company s Windows e Windows CE 6 0 b Advantage e lt provides stable software capacity by using Microsoft Company s platform It can process diverse function simultaneously It provides diverse interface including Ethernet USB The user interface including mouse and keyboard can be connected It has high flexibility like computer software Fast reaction is available when adding new equipment Wide data sharing and management with upper system is available Later 3 Improvement of project transmission time a It provides Ethernet which is faster than RS 232C N a b It provides the transmission func
83. the result of diagnosis in the result windows Diagnostics i OQ Screen 0 Touch Memory Flash Memory USB Memory Serial 0 Goto MainMenu Data Access OK BATTERY STATUS GOOD Completion of Backup Memory diagnosis 1 If Data Access Fail error is occurred please contact with customer service center 2 If BATTERY STATUS BAD error is occurred battery should be changed Please contact with Customer service center If the DIP switch No 1 is set up as please set it up as A The the mode in which the backup battery is not used _ 5 4 15 Chapter 5 Diagnostics 5 4 Flash Memory Diagnosis If you press Flash Memory button you can see the result of diagnosis in the result widows Diagnostics Screen Touch Backup Memory Goto MainMenu HMI Manager Flashpisk Spec Folder Marne FlashDisk Total Space 987 38 MBytes Used Space B 83 MBytes Available Space 9 0 451 Write Operation SULLESS Completion of Flash Memory diagnosis Remark If Read Disk Information Error occurs please contact with Customer service center LS 15 5 5 Chapter 5 Diagnostics 5 5 USB Memory Diagnosis If you press USB Memory button the result of diagnosis shows up in the result windows Diagnostics OScreen Touch Backup Memory orn Memory
84. tion from USB storage device Data change i 4 High quality screen a It provides the high quality screen and clearness by high quality LCD e ltadopts TFT LCD which supports the 16 bit Color 65 536 Colors b It provides diverse graphic type e tisavailable to express precisely and actually e t provides the simple moving function with GIF support 5 Analog touch Panel a It adopts analog resistor film method Touch Panel e Visibility is improved without the grids Chapter 1 General Introduction 6 It provides high touch resolution can control Touch Panel precisely Matrix Analog NN gt 6 Multilingual and diverse font a It supports the multilingual function e t transmits the Windows User font used in computer to Panel e Additional language development is not necessary e Multilingual language is an advantage of Windows CE b It can express twelve kinds of language simultaneously e t can express 12 kinds of language simultaneously e Language switching is available by using special switch during operation c It can provide the various fonts e Various expressions are available by using the Windows User font e Font size and type can be adjusted freely 14 ILS Chapter 1 General Introduction 7 Advanced function a Alarm function e The History alarm can be classified alarm group and alarm list and selected alarm can be expressed by
85. to several files according to the contents but when this fails downloading is stopped If this symptom is repeated contact Customer Service Center The data divided according to the contents is moved to the original storage location but when this fails downloading is stopped If this symptom is repeated contact Customer Service Center The downloaded project is not installed normally because of error of the Flash Disk Download the project again If this symptom is repeated contact Customer Service Center The downloaded project zip file is moved to the original storage location but when it fails downloading is stopped If this symptom is repeated contact Customer Service Center There is a program to reboot engine program after downloading in the device but when it fails this message shows up But because the downloading is completed if you reboot engine directly it works normally The program name to reboot is startup exe and it can be installed by engine upgrade function It can t find software to reboot XGT Panel Update the XGT Panel The project data was not downloaded normally because of communication error Check the connection status of communication cable and If this symptom is repeated contact Customer Service Center There is version information file but when it cant read file normally because of the device error downloading is stopped because it doesn t know version If this symptom is repeated contact Custo
86. ttings Using N 1 communication it means communicate number of XGT Panel with single PLC Driver 0 LSIS XGI XGR XEC LINK E Version 1 20 Settings N 1 Settings t SHOW INFO Close H 1 Settings Use N 1 Communication 1 station number Number of XGT Panel Master Holding 5 Cancel N 1 settings dialog box The communication between several XGT Panels and a PLC can be set up For detail information about the N 1 communication please refer to the XP Builder manual Ch 6 Viewing Information of PLC Connection Status 6 9 Program Monitor The programs that adopt LD language of XGK series can be monitored Version 1 20 Settings N 1 Settings SHOW INFO Close ELEM Program Monitor driver can be downloaded from XP Manager Only support for XGK XGB CPU Cnet Enet communication Driver 0 LSIS XGI XGR XEC LINK To enable the Program Monitor button program monitor should be checked in which locates in the XP Builder project property menu Project Property Storage Settings Global Script Settings Auxiliary Settir Summary aT Panel settings Screen Settings Security Settin Series we Model 40 Ac Controller 0 Controller Settings Maker 1515 Product LSIS SOR CINES Connection Property Protocol IRS 32C Serial Timeout 0 100mes Wa
87. ty Shandong province 266071 P R China Tel 81 3 3582 9128 Fax 81 3 3582 2667 e mail jschuna lsis com Tel 86 532 8501 6068 Fax 86 532 8501 6057 e mail wangzy lsis com cn m LSIS ME FZE Dubai U A E m LSIS Europe B V Address Jafza View Tower Lob 19 Room 205 Along Sheikh Zayed Address 1st Floor Tupolevlaan 48 1119NZ Schiphol Rijk The Netherlands Road Jebel Aali Free Zone Dubai United Arab Emirates Tel 31 0 20 654 1420 Fax 31 0 20 654 1429 e mail junshicko Ilsis com Tel 971 4 886 5360 Fax 971 4 886 5361 e mail jungyongl lsis com m LSIS Wuxi Co _ Wuxi China m LSIS Shanghai Office _ Shanghai China Address 102 A National High amp New Tech Industrial Development Area Address Room E G 12FL Hiamin Empire Plaza No 726 West Wuxi Jiangsu 214028 P R China Yan an Road Shanghai 200050 China e mail liyong Isis com cn Tel 86 510 8534 6666 Fax 86 510 8534 4078 e mail caidx lsis com cn Tel 86 21 5237 9977 609 Fax 89 21 5237 7189 m LSIS Dalian Co Ltd _ Dalian China m LSIS Beijing Office _ Beijing China Address No 15 Liaohexi 3 Road Economic and Technical Development zone Address B Tower 17FL Beijing Global Trade Center B D No 36 Dalian 116600 China East BeisanHuan Road DongCheng District Beijing 100013 P R China Tel 86 411 273 7777 86 411 8730 7560 e mail cuibx Isis com cn Tel 86 10 5825 6027 666 Fax 86 10 5825 6028 e mail xunmj Isis com cn m LSIS Guang
88. use of change of part Cause 1 After switching the screen when connection is set up multiply or communication time out occurs the screen of previous part remains in some object lt Solution gt 1 It is normal status In case that multiple connection or communication is not good when switching the screen the remains of previous screen can occur during the time out hour The folded object doesn t sequentially show up Phenomenon The number under the data list shows up above data list lt Cause gt 1 The device value is expressed at the top of object screen lt Solution gt 1 It is normal status The folded window or part object is not included in screen regardless of sequence of drawing the object changed recently is expressed at top of screen So if possible do not fold the object in screen The object always shows up above the figure Phenomenon downloaded the figure above the object in XP Builder but the object always shows up above the figure lt Cause gt 1 In XGT Panel The object always shows up above the figure lt Solution gt 1 It is normal status The object always shows up above figure in the XGT Panel 1 5 Communication Problem It seems that communication does not work Phenomenon On the screen where the object is not many communication works but when you move the screen where the object is many timeout occurs Cause 1 In the device setting
89. y and improve the reservation Check the status No gap between the gasket and Gasket installation status P j Replace gasket or affix brackets firmly Gasket status No damage or deterioration Replace gasket 11 2 Daily Maintenance Check the followings daily Retighten Mounting status Check the brackets Should be mounted firmly 9 screws Retighten screws Reduce the distance between compressed terminals Power terminal status Keep the proper distance Correction Unwinding of fixed screw Not loose status screws Refer to the Indication LED Check the lighting Blue LED should be tumed On appendix 1 Communication connector Retighten Chapter 11 Maintenance 11 3 Periodical Maintenance Check the followings once or twice every six months and take measure Surrounding temperature Measure through Environment Surrounding humidity temperature Hygrometer Surrounding pollution Measure of corrosive gas degree Unwinding swing Move XGT Panel XGT Panel Dust foreign matter s Visual check Looseness Retighten screw with Screwdriver Reduce the distance between compressed terminals Retighten screw with Loose brackets j Screwdriver Visual check Connection Status Check the power voltage of Power voltage maintenance input terminal of power by test Check when battery exchanged and voltage drop 5 indicated It is expressed by system alarm LCD Backlight maintenance Visu
90. zhou Office Guangzhou China Address Room 1403 14FL New Poly Tower 2 Zhongshan Liu Road Guangzhou P R China Tel 86 20 8328 6754 Fax 86 20 8326 6287 e mail chenxs lsis com cn xX LS Industrial Systems constantly endeavors to improve its product so that 2015 8 information in this manual is subject to change without notice LSIS Co Ltd 2015 All Rights Reserved

XGT PANEL eXP Series

Contents

Download Pdf Manuals

Related Search

Related Contents