Molift Stretcher
Contents
1. section by pushing the section parts down on the sides and then together Page 6 of 12 Turn the patient on the back and place the patient in a stable and comfortable lying position If necessary the patient shall be strapped to the stretcher with security straps to ensure he she does not move and slide out of position Lifting from bed with patient lifter Example showing lift with Molift Partner 255 Place the lifter over the patient as shown on the il lustration e Attach the 4 lifting straps to the suspension Make sure that the two stretcher locks are proper ly secured and the 4 straps correctly attached on the suspension before lifting Note that a fixed suspension is more stable than a A suspension hanging freely BM18101 Molift Stretcher English rev E 09 2008 molift e Lift the user carefully so the stretcher is clear ofthe Unlock the stretcher in head section push down bed and move him or her You do not have to lift the stretcher parts and push the security lock and high Ensure that the patient is stable and do not loch and the pull the stretcher parts apart slide Do not push or pull the stretcher e Lower the user carefully down to desired surface i Make sure the user and stretcher are placed stead e Remove carefully the two stretcher parts from the ily Take the loops off the hooks and remove the lift bed Removing the stretcher e Unlock the stretcher in the foot sectio2. sides and pull the stretcher apart Security lock S If the lock is hard to open push the stretcher parts down on both sides in a way the makes the stretcher even and unloads the locking mecha nism It may help to turn the patient over on one side as well Closing the stretcher locks Push the stretcher part together until the lock clicks in place Make sure that the locks are secured in correct po sition If the lock is hard to close push the stretcher parts down on both sides in a way the makes the stretcher even It may help to turn the patient over on one side as well Check before use e Check that there is no damage on stretcher or accessories Check that lifting belt has no damage torn or frayed e Check that the locks works properly and secure BM18101 Molift Stretcher English rev E 09 2008 molift Lift and movement with Molift Stretcher e Cross the opposite leg and arm of the patient over the other leg and arm to simplify the tilting of the Make sure that the patient always is stable and patient to the side as shown on picture don t slide Do not push or pull the stretcher when transferring with a lifter Use safety straps when needed Use a pillow under the head of the patient during the handling for better protection against injury Remember the correct working position to protect gt gt bb gt your back a EH If possible use the sheet to tilt the patient slightly If
3. the stretcher is used in swimming pool the to the side If no sheet could be used see page 8 for stretchers buoyant force will change if water en description of placing the stretcher ters inside the stretcher Molift recommends three carers when placing and operating the stretcher The stretcher normally doesn t have to be re moved before x ray or CT scanning ya Place one part of the stretcher underneath the pa tient Placing the stretcher in bed If possible adjust the bed to a suitable working S height and lock the wheels on the bed e Change the patients position with crossing the leg and arm to the opposite side If possible arrange to have access from both sides F of the bed before you start the procedure Split the stretcher in two parts as described above molift Page 5 of 12 designed for life molift Then again if possible use the sheet to turn the pa tient to the other side e Place the other part of the stretcher under the pa tient and push the two stretcher parts together Secure the lock in the foot section first then secure the lock in the head section If the mattress is soft it is necessary to push the stretcher parts down on the sides to make the stretcher horizontally even This will simplify the engagement of the security lock and lock Keep the patient turned to one side e Close the stretcher in the head section in the same way as in the foot
4. a Paul Bst ndig GesmbH Strohbogasse 8 1210 Wien Tel 01 405 35 43 Fax 01 406 81 02 www bstaendig at Belgium Pronk ergo NV Sint Pietersmolenstraat 204 1 8000 Brugge T 32 0 50 32 20 20 F 32 0 50 32 20 40 www pronkergo be Danmark Handicare A S Jernholmen 41 2650 Hvidovre Tel 45 70 22 43 41 www handicare dk Finland Mediq Suomi Oy Orionintie 5 P O Box 8 FI 02101 Espoo Tel 358 10 429 99 Fax 358 10 429 2047 www media fi France Praxis Medical Technologies Parc 2000 107 rue Dassin 34080 Montpellier FRANCE Phone 33 04 99 77 23 23 Fax 33 04 99 77 23 39 info praxismedical com Germany Thomashilfen f r Behinderte GmbH amp Co Walkm hlenstrasse 1 27432 Bremerv rde Tel 0 47 61 88 60 Fax 0 47 61 886 19 www thomashilfen de Herrmann amp Co GmbH Oelder str 20 33378 Rheda Wiedenbruck Tel 05242 9671 40 Fax 05242 9671 41 www herrmann co de Iceland Eirberg Storhofoi 25 IS 110 Reykjavik www eirberg is Ireland Meditec Medical Ltd Unit 28 Whitestown Drive Whitestown Industrial Estate Tallaght Dublin 24 Tel 01 4624045 www meditecmedical ie Israel Mediscan Systems Ltd P B Box 2195 6 Hamanov St Rehovot 76386 IL 76121 Rehovot www mediscan co il Italy Fumagalli Piazza Puecher 2 22037 Pontelambro Tel 39 031 3356811 Fax 39 031 622111 www fumagalli org Japan Pacific Supply Co Ltd 1 12 1 Goryo Daito shi JP 5740064 www p supply c
5. etal in the locks and reels Cleaning instructions e The Molift Stretcher can be washed with normal household detergents and disinfected with normal disinfectants on a cloth The stretcher can be washed in hospital wash ing machines at 80 C in short term washing The stretcher must be cooled down to normal room temperature max 30 C before use e Careful high pressure cleaning is possible 100 bar Remember to remove the straps before washing sa in washing machine or with high pressure The stretcher has a hollow structure and we recom mend to check that no water is trapped inside the stretcher after washing Maintenance Molift recommends annual inspection of the stretcher e Check that there is no damage on stretcher or ac cessories e Check that lifting straps has no damage torn or frayed Damaged lifting straps must be replaced contact your dealer or Molift e Check that the locks works properly and secure with no loose parts e Check that there is no water trapped inside the stretcher Max user weight SWL is 300 kg for Molift Stretcher Page 11 of 12 Norway Molift AS Ole Deviksvei 44 0668 OSLO TIf 47 40001004 Fax 47 40001008 www molift com Australia Patient Handling Australia 8 Chapel Street Marrickville NSW 2204 Sydney www patienthandling com au Ceiling Hoist Solutions Melbourne Office 58 62 Star Crescent AU 3803 Hallam VIC www ceilinghoistsolutions com au Austri
6. fting straps when not in use See illustration Foot section 2150357 Set of lifting loops standard 4 pcs stretcher 2150356 Set of straps with auto strap collectors Apcs stretcher molift Page 3 of 12 designed for life molift Using the stretcher A Lifting and moving patients always involves a certain degree of risk Read the lift s user manual carefully It is important to understand and be fa miliar with the equipment and only trained per sonnel should use it Show caution and care when you use the lift and its accessories The need of safety straps should be considered You as a car er are responsible for the safety of the patient The stretcher is split in two parts The locks in the top and bottom end is opened and closed as described be low Try to open and lock a couple of times before use the first time to learn how it works A Do not tamper with the locks when stretcher is loaded The locks are easier to operate when the stretcher is resting on a plane surface this is also a safety precaution Opening the stretcher locks Without load Lock e Open the lock by pushing in the security lock and lock handles and then pull the stretcher apart Security lock Page 4 of 12 With load on a soft surface qe i d i i 5 e a ff Lock e Push the stretcher down on one side 1 to unload the stretcher lock Open the lock by pushing in the security lock and lock handles on both
7. molift STRETCHER a stretcher from molfi BM18101 Molift Stretcher English designed for life molift Table of content Molift Stretcher 22222 222000 3 Technical data u44n24444nnnnnneeenennneeeeeen 3 Using the stretcher uneeeenssessenneeennnnnnn 4 Check before use l a 5 Lift and movement with Molift Stretcher 5 X ray and CT scanning eeeee 10 Cleaning instructions 11 Maint nance 0 cccccccccccneecccceeeeeceeeneeeeesenaees 11 molift designed for life Molift Group AS Ole Deviksvei 44 0668 OSLO Norway Teleph 47 40001004 www molift com Fax 47 40001008 info molift com Page 2 of 12 CE Molift Stretcher has CE label according to the Council Directive 92 42 EEC for Medical Devices The Molift Stretcher is only ment to be used by quali fied personnel Please read these operating instructions carefully be fore putting the product into operation We assume no liability for damage or malfunctions resulting from fail ure to comply with the instructions All technical information data and instructions for op eration contained in these operating instructions were up to date at time of print and are compiled on the ba sis of our experience and to the best of our knowledge We reserve the right to incorporate technical modifica tions within the scope of further development of the prod
8. n Push the stretcher parts down 1 to unload the stretcher lock The patient might also be turned to one side Open the lock by pushing in the security lock and lock handle and pull the stretcher apart ER a AA a a i f Po ir w wW gt J 5 e E 6 S d z re 2 12 e Place the patient in a comfortable lying position e Pull the two parts carefully from each other to cre ate a V shape designed for life Placing the stretcher with patient on floor Lifting from floor with Molift Partner 205 230 255 Place the two stretcher parts in a V shape around e Adjust the legs of the lifter to maximum width the patient e Place the lifter in the head section of the stretcher as close as possible rg j l Pie Ja ea pis A Secure the stretcher lock in foot section and slide the V shaped stretcher as close to the patient as i possible Sa iY If possible cross the opposite leg and arm of the pa tient over the other leg and arm to simplify the tilt Attach the straps in the head section of the stretch ing the patient to the side as shown on picture er in a diagonal pattern on the 4 point suspension f Tg Alternatively for lifters with fixed suspensions Molift Partner 230 255 the straps can be at tached on one side of the 4 point suspension This will simplify the following procedure push careful ly one part of the stretcher underneath the patien
9. o jp Netherlands Pronk Ergo bv Cobaltstraat 14 2718 RM Zoetermeer TIf 079 361 13 40 Fax 079 361 13 41 www pronkergo nl New Zealand Morton amp Perry Homecare Equipment P O Box 34439 Birkenhead Auckland 0746 www mortonperry co nz Spain Karinter S L C Ram n Turr 5 9 Local 4 08005 Barcelona Tel 34 93 2211917 Fax 34 93 221 18 72 www karinter com Sverige Molift AB Ekbacksvagen 26 168 69 Bromma Tel 08 564 616 50 Fax 08 564616 59 www molift com Switzerland Kuhn und Bieri AG Konizstrasse 227 3097 Bern Liebefeld Tel 0848 10 20 40 Fax 031 970 01 71 www kuhnbieri ch United Kingdom Meditec Molift Ltd Hi Trac House Unit 1 Woodrow Business Centre Woodrow Way Irlam Manchester M44 6NN Tel 0844 8004236 Fax 0844 8004237 www molift com USA Molift Inc 8406 Benjamin Road Suite C Tampa FL 33634 Tel 813 969 2213 Fax 813 969 3954 www moliftinc com molift designed for life
10. t e Tilt the patient slightly on the opposite side and push carefully the other part of the stretcher under neath the patient b I p i DaN j e Secure the lock in the head section P a F AA Lift up the stretcher enough to turn the lifter 90 with the lifter legs underneath the stretcher Page 8 of 12 BM18101 Molift Stretcher English rev E 09 2008 e Adjust the legs to minimum width To balance the stretcher pull it slightly backwards then lower the stretcher carefully down on the legs of the lifter Remove the strap on the backmost hook of the sus pension and attach it to the foremost hook Attach the two lifting straps closest to the foot section on the backmost hooks as shown on the illustration below Lift the patient from the floor Make sure that the patient always is stable and don t slide Do not push or pull the stretcher when transferring with a lifter molift designed for life molift Lower the user carefully down to desired surface Make sure the user and stretcher are placed stead ily Take the loops off the hooks and remove the lift Remove the stretcher as described on page 7 Page 9 of 12 molift X ray and CT scanning The stretcher is designed to give as little shadow as possible when used in x ray or CT scanning and should normally not have to be removed for this Consider the specific situation The illustration below shows the areas where the pic t
11. uct described in this manual BM18101 Molift Stretcher English rev E 09 2008 molift ee o Security Straps might be ordered separately Set of 3 Molift Stretcher straps for each side Te 2150355 Set of safety belts 3 pcs stretcher Molift Stretcher is made of a light plastic composite ma terial and steel locks It is designed to be used in com A Use the straps to secure the patient The straps will bination with a lifter to lift from bed or floor It as also avoid the patient from sliding out of position possible to be used in hospitals in combination with x ray CT scanning AN The stretcher can only be used with a 4 point sus pension with a fixed connection or with a com plete free connection the suspension swings free ly A suspension with fixed connection Head section A The stretcher is designed for indoor use and should not be exposed to direct sun over a longer period Center of gravity when loaded It is possible to use the stretcher without lifter and straps Safety straps is recommended Technical data Weight Total 14 4 kg One half 7 2 kg Measurements 1980x630x126 mm LxWxD Material Plastic composite body and stainless steel locks Safe Working Load 300 kg Molift Stretcher 2150103 Molift Stretcher excl Lifting loops and safety belts Lifting loops The stretcher is available with standard lifting straps or lifting straps with reels that automatically retracts the li
12. ure can be jammed when CT scanning a standard stretcher Part 21500001 Upper head area 1866 Feet area Standard Molift Stretcher has areas around the lock in head and foot section where shadows disturbance may occur by CT scanning Molift Stretcher with reels Art 2150010 willin addition have jamming in the areas where the reels with spring is placed This is in the shoulder area and leg area as shown on next illustration Page 10 of 12 Upperhead area Shoulder areas 1866 Feet area The following pictures is examples from CT scanning of a dummy on Molift Stretcher Molift Stretcher with a test dummy in a CT scanner One security strap is used BM18101 Molift Stretcher English rev E 09 2008 oe ee ee LO Le PP RERE E mer 7 b u e 7 ME Ala Security strap u i BA i F F It i Er ey ai F att 1 Cross D sectB amp Cross sectA Picture from CT scanning of the dummy on Molift Stretcher The stretcher outline is only just visible including the reels in leg area The left reel is mounted with a spring 1 Fiii fee feed omi EO he wi Cross section B The cross section pictures are from the leg area with lifting straps and reels Cross section B shows how the spring on the reel affects the scanning by making Stripes on the picture Scanning with X ray might also have disturbance shadows in the same areas because of m
Download Pdf Manuals
Related Search