Amber filter board (in box)
Contents
1. PACKAGE CONTENTS Scanner unit QIG User s manual TV out cable Upper lid USB 2 0 cable SD card 4G Gel shovel Gel cutting knife Gardveader Standaione A C adapter 12V 1 5A DC Sample tray in box LED isplay Amber filter board in box Up Down Left Right menu button Black plastic board in box SD SDHC card slot Blue Light White Light selection switch SCANNER COMPONENTS Front Figure 1 Back Figure 2 Inside Figure 3 Up Down Left Right menu button SD SDHC card slot Scan button Blue Light White Light selection switch Upper lid Card Reader Standalone Regular operation mode LCD display Upper lid Lighting area DC power USB 2 0 port TV Out port DC power Upper lid USB 2 0 port Lighting area TV Out port Figure 2 SETUP 1 Remove all tapes used to hold items in place for shipping 2 Place scanner unit on flat surface 3 Insert SD SDHC card up to 32GB 4 Connect power source see Figure 2 connect AC adapter to back of unit then plug into electrical outlet 5 The Menu Mode icon will be displayed on the top left side of the display Figure 4 6 Wet the gel and place gel at the center of the sample tray Figure 5 7 Place sample tray into the Lighting area of the system Figure 6 Caution Do not place the gel directly on the surface of the Lighting area Fail to do so may lead LED damage caused by buffer2. Mode 1X1 Display 1 image at a time 2X2 Display 4 images at a time 3X3 Display 9 images at a time d Press OK button to save the setting e The captured images will display on the screen based on the selected preview format setting Set Up Mode Ww Same as the Set Up Mode described in Function Descriptions on page 9 15
3. corner A Function Descriptions l Sot 2E5 DOJE 5 Scan Mode The object is able to be scanned in this mode LED Lighting Mode To select the white light application for Wis Transmitted Epi image scan respectively Note this mode is available only when white light application is selected o Exposure Mode To adjust the exposure time frame in this mode Ea j B W Switch Mode To scan display the image in colorimetric monochrome and normal invert mode Default setting monochrome black amp white Set Up Mode To set up the following parameters a LCD Dark Normal Bright b Display NTSC PAL NTSC USA PAL Europe c Quality S Fine Fine Normal JPEG Compression d Size 12M 9M 5M 1M Megapixels 9M is default setting e f 8 Power Save 1 min 3 min 5 min 10 min off Power shut off Language English 32237 H Format Yes No Format SD card h Reset Yes No Reset all current settings back to factory default Functional Menu B Function Descriptions II o T s mleli o Play Mode To play the captured images To examine the captured image Auto Play Mode To automatically play the captured images one by one r k sS Edit Mode To edit the captured images such as to rotate or to delete the captured image etc Preview Mode To preview the captured images in a multi image thumbnail panel iT Set Up Mode Same as the Set U
4. leakage 8 Start to adjust the image condition and scan Sample tray Figure 5 Place the gel at center of the sample tray Menu mode icon Lighting area Figure 6 Place sample tray into the Lighting Area of the system SCANNING GEL 1 In Scanning Mode Gi lift scanner lid and take the sample tray out of the scanner 2 Wet the gel and place the gel at the center of the sample tray 3 Place the sample tray back to the Lighting area of the scanner Caution Do not place the gel directly on the surface of the Lighting Area Failing to use the tray may cause buffer leakage and damage the LED Figure 6 4 Slide the black plastic board into the groove of the white backlight to block the white light on the lid Figure 7 5 Close the scanner lid 6 Slide the Light Selection Switch on the front side of the scanner to choose blue light source for scanning stained gel 7 Set and adjust the desired image quality through the Functional Menu if necessary Please check Functional Descriptions section for the details of all functions 8 Press SCAN button green LED will flash and CAPTURING will be displayed on the screen The scanned image will automatically save to SD card Scanning of the gel sample is now complete it is suggested to slide the black plastic board to block the white backlight on the lid for fluorescent stained gel scanning For colorimetric gel scanning leave the white
5. backlight unblocked on the lid Black plastic board White backlight Figure 7 Slide the black plastic board to avoid the background light for fluorescent stained gel scanning For colorimetric gel scanning leave the white backlight unblock on the lid SCANNING WESTERN BLOT COLORIMETRIC STAINED GEL In Scanning Mode E lift scanner lid and take the sample tray out of the scanner Place the blot membrane at the center of the tray for which the signal side of the membrane is facing toward the bottom of the tray 3 Place the sample tray back into the Lighting area of the scanner Slide the black plastic board into the groove of the white backlight to block the white light on the lid Close the scanner lid Slide the Light Selection Switch on the front side of the scanner to select the white light source for stained gel scanning 7 Set Transmitted or Epi item through Functional Menu Please check LED Lighting of Functional Descriptions section for details of turn on of Transmitted or Epi application 8 Adjust the desired image quality through the Functional Menu if necessary Please check Functional Descriptions section for the details of all functions 9 Press SCAN button green LED will flash and CAPTURING will be displayed on the screen The scanned image will automatically be saved to SD card Scanning of the blot is now complete Transmitted mode is to s
6. can the gel stained with colorimetric stain such as the SDS PAGE gel stained with coomassie blue stain BROWSE SCANNED IMAGES DELETE SCANNED IMAGES Examine Scanned Images a When Gi icon displays on top left corner of the screen press OK to get into functional options b When Scan Mode icon is highlighted press OK again to get into Play Mode c The Play Mode icon o will display on top left corner of screen The captured images can then be reviewed one by one by pressing right arrow button Delete Scanned Images a When viewing the image that needs to be deleted press OK to get into Function Descriptions Il b Press right arrow button to choose Edit Mode Ei f c Press up down arrow button to choose Delete Press right arrow button to select yes no to delete the file d Press up down arrow button to select Yes Press OK to save the setting The image is thus deleted INSTALLATION OF AMBER FILTER BOARD Glite 900 BW is equipped with an amber filter board for blue light protection and gel cutting purposes Open the lid and install the filter board so the gel cutting task may be conducted 1 Open the lid 2 Lift the lid to its maximum open angle 3 Position the amber filter board with the hole for hanging on lid in front Figure 8 4 Place the amber filter board onto the filter board hanging tab so the filter board may hang as shown in F
7. ert or B amp W invert Press OK again to return to Scan Mode The default setting of the scanner is Black amp White 11 Set Up Mode YW a When Gi icon displays on top left corner of the screen press OK to get into functional option list Ai b Press right arrow button to choose Set Up Mode C Press down arrow button to get into Setup Menu and select the desired setting item d Press right arrow button to get into setting mode Then press up and down arrow button to select the desired setting Press OK to save the setting e Press down arrow button to select other setting mode or press OK again to return to Scan Mode Setup Menu and related setting items a LCD Dark Normal Bright Display NTSC PAL NTSC USA PAL Europe Quality S Fine Fine Normal JPEG Compression Size 12M 9M 5M 1M Megapixels 9M is default setting Power Save 1 min 3 min 5 min 10 min off Power shut off Language English 92 137 H Ase Format Yes No Format SD card h Reset Yes No Reset all current settings back to factory default ma ro aono ogo 12 Function Descriptions II Gi T s AAR Play Mode a When Ei icon displays on top left corner of the screen press OK to get into functional options b When Scan Mode icon is highlighted press OK again to get into Play Mode c The P
8. igure 9 5 When hanging on the lid make sure the two small rods on the filter board are placed closely against the lid 6 The installation is completed One may turn on blue LEDs for further gel cutting purpose by using the provided gel cutting knife Figure 9 a a Filter board hanging tab Amber Filter Board Small rod ACCESS STORED SCANNED IMAGE FILES WITH COMPUTER The files stored on the SD SDHC card can be accessed by a computer 1 Connect the provided USB cable to the computer USB port 2 Connect the other end of the cable to the USB port on the back of the scanner 3 Switch Card reader Standalone to Card Reader mode 4 Through the operating system on PC the contents of the SD SDHC card will be available as removable media 5 Copy the files to PC s hard drive for storage or for further use DISPLAY SCANS ON TV The display from the scanner can be displayed on a television rather than the built in scanner preview screen using the AV video port 1 Set the television to AV mode see TV documentation for details 2 Connect the included TV Out cable to the video port on the TV 3 Connect the other end of the cable to the TV port on the back of the scanner 4 Video output from the scanner can now be seen on the connected TV including the full menu interface Functional Menu When image display on screen in yellow border press OK button so the functional icon will show on the left upper
9. lay Mode icon o will display on top left corner of screen The captured images can then be reviewed one by one by pressing right arrow button d Press OK twice to get back to Scan Mode It will take few seconds to complete the process Auto Play Mode E a When in Play Mode fo press OK to get into functional option list b Press right arrow button to choose Auto Play Mode TG then press OK c The captured image will automatically display on LCD screen one by one 13 Edit Mode s A a When in Play Mode o press OK to get into functional option list LJ b Press right arrow button to choose Edit Mode s c Press down arrow button to get into Edit Menu Rotate Delete and select the desired setting item d Press right arrow button to get into setting mode Rotate Right 90 Delete No Left 90 Yes 180 Flip H Flip V e Press up and down arrow button to select the desired setting Press OK to save the setting f Repeat step e for delete mode setting or press OK again to return to Play Mode 14 Preview Mode BBE Eze a When in Play Mode o press OK to get into functional option list b Press right arrow button to choose Preview Mode c Press down arrow button to get into Preview Menu 1 X 1 2 X 2 3 X 3 and select the desired setting item Preview
10. p Mode functions in Function Descriptions I Function Descriptions ope 0 ar h Scan Mode Gi When o icon displays on top left corner of the screen the object is ready to be scanned LED Lighting Mode Wie i a When in Scan Mode press OK to get into functional option list b Press right arrow button to choose LED Lighting Mode ME i c Press up or down arrow button to choose light source Transmitted amp Epit d Press OK to save the setting LED Lighting Mode Is only available when switching to white light application 1 Transmitted mode is to scan the gel stained with colorimetric stain such as the SDS PAGE gel stained with coomassie blue stain 10 B W Switch Mode a m she Exposure Mode sor When a icon displays on top left corner of the screen press OK to get into functional option list 7 Press right arrow button to choose Exposure Mode Ea k 4 Press up or down arrow button to choose the desired exposure level When the desired exposure level is selected press OK to get back to Scan mode a When Gi icon displays on top left corner of the screen press OK to get into functional option list Press right arrow button to choose B W Switch Mode Press up or down arrow button to choose to select the desired display mode color or B amp W color inv
Download Pdf Manuals
Related Search