Philips 166V3LAB User Guide Manual
Contents
1. Always activate a moving screen saver program when you leave your monitor unattended e Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content Severe burn in or after image or ghost image symptoms will not disappear and cannot be repaired The damage mentioned above is not covered under your warranty Image appears distorted Text is fuzzy or blurred Set the PCs display resolution to the same mode as monitors recommended screen native resolution Green red blue dark and white dots appears on the screen e The remaining dots are normal characteristic of the liquid crystal used in today s technology Please refer the pixel policy for more detail The power on light is too strong and is disturbing e You can adjust power on light using the power LED Setup in OSD main Controls For further assistance refer to the Consumer Information Centers list and contact Philips customer service representative 8 2 General FAQs Q1 When install my monitor what should do if the screen shows Cannot display this video mode Ans Recommended resolution for this monitor 1366 x 768 60 Hz Unplug all cables then connect your PC to the monitor that you used previously e In the Windows Start Menu select Settings Control Panel In the Control Panel Window select the Display icon Inside the Display Control Panel select th2. Quick View loads the before after images To return to Color home pane click the Cancel button Enable color calibration by default is on If unchecked does not allow for color calibration to happen dimes out start and quick view buttons Must have patent info in calibration screen First color Calibration Screen Previous button is disabled until the second color screen Next goes to the succeeding target 6 targets Final next goes File gt Presets pane Cancel closes the UI and returns to the plug in page Options gt Preferences Will only be active when selecting Preferences from the drop down Options menu On a non supported display capable of DDC CI only the Help and Options tabs are available Bacon 2 dps 2381 X38713000001 BI SmartControl Lite PHILIPS je e 16 ie je 4 f agua e Displays current preference settings e A checked box enables the feature The check box is a toggle Enable Context Menu on desktop is checked On by default Enable Context menu displays SmartControl Lite selections for Select Preset and Tune Display in the esktop right click context menu Disabled emoves SmartControl Lite from the right ick context menu nable Task Tray icon is checked On by efault Enable context menu shows the ask tray menu for SmartControl Lite A right click on the task tray icon displays the menu options for Help Technical Support Check for Upgrade About and Ex
3. 62 21 75909053 75909056 Indonesia NA T Gadingsari elektronika Prima 7511530 South Korea A PCS One Korea Ltd 080 600 6600 A After Market Solutions CE Malaysia NA Sdn Bhd 603 7953 3370 Pakistan NA Philips Consumer Service 9221 2737411 16 Philips Electronics Singapore Singapore NA Pte Ltd Philips Consumer Care 65 6882 3999 Center PCCW Taiwan Teleservices Fa oe 0800 231 099 Taiwan Thailand NA Axis Computer System Co Ltd 662 934 5498 South Africa NA Sylvara Technologies Pty Ltd 086 0000 888 ee INA AL SHAHD COMPUTER LLC 00971 4 2276525 Emirates Israel NA Eastronics LTD 1 800 567000 FPT Service Informatic 84 8 38248007 Ho Chi Minh City Vietnam NA ae e a 84 5113 562666 Danang City Be 84 5113 562666 Can tho Province ee 02 633 4533 to 34 Philippines A Glee Electronics Inc 02 637 6559 to 60 Se NA no distributor and or service provider currently Roda NA Distributor Computer Source 880 2 9141747 9127592 E Ltd warranty buy out 880 2 8128848 52 Nepal NA Distributor Syakar Co Ltd 977 1 4222395 warranty buy out Distributor Neat Technology Cambodia NA Pte Ltd Singapore warranty 855 023 999992 buy out Downloaded from ManualMonitor com Ma dals 8 Troubleshooting amp FAQs 8 Troubleshooting amp FAQs 8 1 Troubleshooting This page deals with problems that can be corrected by a user If the problem still persists after you have tried these solutions contact Philips cu
4. ARAN TAP AP TRASH A ROR AN EHI ARERZFA MMRCRT 45 Perse FIER tos fe ARCHE fa ee Hy IEHEMARTF EHTE IR FRB EINER ea EFA gt HIER RAN Base pk Beak WA Le MERR ETF ie H m i TY at au Ha GZ Ei FERNER RERE ERAREMA ALTBTAUTER EE e AAAS SiR RARER http www energylabel gov cn ER Havas HPP mE MLR PERE m I TEITER R BLI WER MHNT E ABASMRLTH BAER BBEEWREUCE a R 46 Atri SARE SRZEM Pb Ha Cd Cr6 PBB PBDE N WPH R o O O O o O CRI BARR x fe O o O O WARTRR TE x o O fe o O EDT x O o fe o o BRIER x o O fe O O ERRER x o 6 O O o oe RSA BIE ARRAS RAE AB PE MOB gt FEBE SELLE N ER O RRR BA EM ZAN TA BAB PPS Boe RFEBFATEWEZUOMOREEKIE WEDRIEEKUT X ATRASA WAR ED ERNEST BR FERFRHACAFHENRERREN MENRMER BELAR x Kat HERARHSEMER TERMS ER MAMAI gt ESTEKA HE TT an E EL gt NER A EI A TAS TTA Bt TS ETT EAA o Downloaded from ManualMonitor com Marttals 7 Customer care and warranty 7 Custome
5. Analog Input Signal Separate Sync Sync on Green 166V3LA auro w 1q 4 4 0K 0 166V3L aulo w WD A 0 lt 0K W OSD Languages English French German Spanish Italian Russian Simplified Chinese Portuguese Turkish Other Convenience Kensington Lock Plug 8 Play Compatibility Tilt DDC CI sRGB Windows 7 Vista XP Mac OSX Linux 5 20 166V3LA On Mode 8 9W typ 10 7W max Energy Consumption AC Input Voltage at AC Input Voltage at AC Input Voltage at GA tO me 1OOVAC 5VAC 115VAC 5VAC 230VAC 5VAC 50Hz 3Hz 60Hz 3Hz 50Hz 3Hz Normal Operation typ 7 85W 7 8W 1 87W Sleep Standby 0 5W 0 5W 0 5W Off 0 5W 0 5W 0 5W Heat Dissipation AC Input Voltage at AC Input Voltage at AC Input Voltage at 100VAC 5VAC 115VAC 5VAC 230VAC 5VAC 50Hz 3Hz 60Hz 3Hz 50Hz 3Hz Normal Operation 26 79 BTU hr 26 62 BTU hr 26 86 BTU hr Downloaded from ManualMonitor com Mailfals 4 Technical Specifications Sleep Standby 1 706 BTU hr 1 706 BTU hr 1 706 BTU hr Off 1 706 BTU hr 1 706 BTU hr 1 706 BTU hr Power LED indicator On mode White Standby Sleep mode White blinking Power Supply Built in 100 240VAC 50 60Hz 166V3L On Mode 9 10W typ 9 52W max Energy Gentumptisn AC Input Voltage at AC Input Voltage at AC Input Volt
6. lt 0 5W typ OFF 166V3L VESA Mode Video H sync V sync Power Used LED Color Active ON Yes Yes 9 10W typ White Sleep White Standby OFF No No lt 0 5W typ blink Switch Of OFF lt 0 5W typ OFF The following setup is used to measure power consumption on this monitor e Native resolution 1366 x 768 e Contrast 50 e Brightness 200 nits Color temperature 6500k with full white pattern amp Note This data is subject to change without notice Downloaded from ManualMonitor com Ma llals 6 Regulatory Infomation 6 Regulatory Information Lead free Product Lead free display promotes Z environmentally sound recovery and disposal of waste from electrical and electronic equipment Toxic substances like Lead has been eliminated and compliance with European community s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle EPEAT www epeat net amp The EPEAT Electronic oy Product Environmental s Assessment lool program evaluates computer desktops laptops and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA EPEAT system helps purchasers in the public and private sectors evaluate compare and select desktop com
7. e Temperature 0 40 C 32 95 F Humidity 20 80 RH e IMPORTANT Always activate a moving screen saver program when you leave your monitor unattended Always activate a periodic screen refresh application if your monitor will display unchanging static content Uninterrupted display of still or static images over an extended period may cause burn in also known as after imaging or ghost imaging on your screen Burn in after imaging or ghost imag ing is a well known phenomenon in LCD panel technology In most cases the burned in or after imaging or ghost imaging will disappear gradually over a period of time after the power has been switched off A Warning Severe burn in or after image or ghost image symptoms will not disappear and cannot be repaired The damage mentioned above is not covered under your warranty Service e The casing cover should be opened only by qualified service personnel If there is any need for any document for repair or integration please contact with your local service center please refer to the chapter of Consumer Information Center e For transportation information please refer to Technical Specifications Do not leave your monitor in a car trunk under direct sun light amp Note Consult a service technician if the monitor does not operate normally or you are not sure what procedure to take when the operating instructions giv
8. keys Reset Yes No In the OSD shown above you can press W Information A buttons at the front bezel of the monitor to move the cursor and press OK button to confirm the choice or change Downloaded from ManualMonitor com Marfuals 2 Setting up the monitor EJ Resolution notification 2 3 Remove Base Stand and Base This monitor is designed for optimal performance at its native resolution 1366 x ER Remove the Base Stand 768 60 Hz When the monitor is powered Before you start disassembling the monitor on at a different resolution an alert is displayed base please follow the instructions below to on screen Use 1366 x 768 60 Hz for best avoid any possible damage or injury FO 1 Place the monitor face down on a smooth Display of the native resolution alert can be surface taking care to avoid scratching or switched off from Setup in the OSD On damaging the screen Screen Display menu EI Physical Function Tilt 2 Press the locking clips to detach the base stand away from the base column 3 Press the release button to detach the base column Downloaded from ManualMonitor com Mantials 2 Setting up the monitor El Remove the base 1 You may use a flathead screwdriver to stick into two release hols on the hinge cover and gently pry the hinge cover to have it removed 2 Remove 4 screws and then remove the base from the monitor Downloaded from ManualMonitor com Manrtu
9. off such waste electrical and electronic contact your local government office the waste disposal organization that serves your household or the store at which you purchased the product Your new monitor contains materials that can be recycled and reused Specialized companies can recycle your product to increase the amount of reusable materials and to minimize he amount to be disposed of All redundant packing material has been omitted We have done our utmost to make the packaging easily separable into mono materials Please find out about the local regulations on from your sales representative how to dispose of your old monitor and packing Recycling Information for Customers Your display is manufactured with high quality materials and components which can be recycled and reused To learn more about our recycling program please visit www philips com about sustainability recycling Downloaded from ManualMonitor com Mantials 2 Setting up the monitor A Install base stand 2 Setting up the monitor 1 Place the monitor face down on soft and smooth surface taking care to avoid 2 1 Installation scratching or damaging the screen 2 Attach the base column with the monitor EI Package contents until it clicks into position Quick Start PHILIPS pios 22228 A 3 Hold the monitor base stand with both hands and firmly insert the base stand into the base
10. 166V3L PHILIPS www philips com welcome EN User manual 1 Customer care and warranty 26 Troubleshooting amp FAQs 31 PHILIPS Downloaded from ManualMonitor com Manuals Table of Contents 1 IMPORANE tas 1 1 1 Safety precautions and maintenance 1 1 2 Notational Descriptions sssr 2 1 3 Disposal of product and packing Material niaminini 3 2 Setting up the monitor 4 2 1 Installation 2 2 Operating the monitor 2 3 Remove Base Stand and Base 7 3 Image Optimization 9 3 1 SmartCon frast ana AA 9 3 2 Philips SmartControl Lite 7 4 Technical Specifications 4 1 Resolution 8 Preset Modes 5 Power Management 20 6 Regulatory Information 21 7 Customer care and warrant 26 71 Philips Flat Panel Monitors Pixel Defect Polen 7 2 Customer Care amp Warranty 8 Troubleshooting amp FAQS 31 8 1 Troubleshooting e 8 2 General FAQs Downloaded from ManualMonitor com Manuals 1 Important This electronic user s guide is intended for anyone who uses the Philips monitor Take time to read this user manual before you use your monitor It contains important information and notes regarding operating your monitor The Philips guarantee applies provided the product is handled properly for its intended use in accordance with its opera
11. age at Eo See meinen 100VAC 5VAC 115VAC 5VAC 230VAC 5VAC 50Hz 3Hz 60Hz 3Hz 50Hz 3Hz Normal Operation typ 75W TAIN 1 72W Sleep Standby 0 5W 0 5W 0 5W Off 0 5W 0 5W 0 5W AC Input Voltage at AC Input Voltage at AC Input Voltage at Heat Dissipation 100VAC 5VAC 115VAC 5VAC 230VAC 5VAC 50Hz 3Hz 60Hz 3Hz 50Hz 3Hz Normal Operation 25 6 BTU hr 25 56 BTU hr 26 35 BTU hr Sleep Standby 1 706 BTU hr 1 706 BTU hr 1 706 BTU hr Off 1 706 BTU hr 1 706 BTU hr 1 706 BTU hr Power LED indicator On mode White Standby Sleep mode White blinking Power Supply Built in 100 240VAC 50 60Hz Product with stand WxHxD Me GER mi Product without stand WxHxD 241 69 x 392 x 41 1 mm Product with stand 1 66kg Product without stand 1 52kg Product with packaging 2 14kg Temperature range operation GEKE Temperature range Non operation 20 C to 60 C Relative humidity 20 to 80 Operation 12 000ft 3 658m GM Non operation 40 000ft 12 192m MTBF 30 000hrs ROHS WES EREGN Silver www epeat net Packaging 100 recyclable Downloaded from ManualMonitor com Marklals 4 Technical Specifications CE Mark FCC Class B GOAST SEMKO UL cUL BSMI Regulatory Approvals 1509241 307 Color Black Finish Glossy Texture amp Note 1 EPEAT Gold or Silver is valid only where Philips r
12. als 3 Image Optimization 3 1 SmartContrast EJ What is it A unique technology that dynamically analyzes displayed content and automatically optimizes an LCD monitor s contrast ratio for maximum visual clarity and viewing enjoyment stepping up backlighting for clearer crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds El Why do I need it You want the very best visual clarity and viewing comfort for every type of content SmartContrast dynamically controls contrast and adjusts backlighting for clear crisp bright gaming and video images or displays clear readable text for office work By reducing your monitor s power consumption you save on energy costs and extend the lifetime of your monitor How does it work When you activate SmartContrast it will analyse the content you are displaying in real time to adjust colors and control backlight intensity This function will dynamically enhance contrast for a great entertainment experience when viewing videos or playing games 3 2 Philips SmartControl Lite The new SmartControl Lite software by Phillips allows you to control your monitor via an easy to use on screen graphic interface Complicated adjustments are a thing of the past as this user friendly software guides you through fine tuning resolution Color calibration Clock Phase adjustments RGB White point adjustment etc Equipped with latest technology in cor
13. ameras monitors printers scanners etc User Define the user can choose his her preference color setting by adjusting red green blue color amp Note A measurement of the color of light radiated by an object while it is being heated This measurement is expressed in terms of absolute scale degrees Kelvin Lower Kevin temperatures such as 2004K are red higher temperatures such as 9300K are blue Neutral temperature is white at 6504K Q9 Ans Q10 Ans Q11 Ans Downloaded from ManualMonitor com Marials Can connect my LCD monitor to any PC workstation or Mac Yes All Philips LCD monitors are fully compatible with standard PCs Macs and workstations You may need a cable adapter to connect the monitor to your Mac system Please contact your Philips sales representative for more information Are Philips LCD monitors Plug and Play Yes the monitors are Plug and Play compatible with Windows 7 Vista XP NT Mac OSX Linux What is Image Sticking or Image Burn in or After Image or Ghost Image in LCD panels Uninterrupted display of still or static images over an extended period may cause burn in also known as after imaging or ghost imaging on your screen Burn in after imaging or ghost imaging is a well known phenomenon in LCD panel technology In most cases the burned in or atter imaging or ghost 8 Troubleshooting amp FAQs imaging will disappear graduall
14. column VGA optional DVI optional Downloaded from ManualMonitor com Martuals 2 Setting up the monitor EJ Connecting to your PC PHILIPS oe AC power input VGA input DVI D input available for selected models p available for selected models Audio inpu Kensington anti theft lock Connect to PC 1 Connect the power cord to the back of the monitor firmly 2 Turn off your computer and unplug its power cable 3 Connect the monitor signal cable to the video connector on the back of your computer 4 Plug the power cord of your computer and your monitor into a nearby outlet 5 Turn on your computer and monitor If the monitor displays an image installation is complete 2 2 Operating the monitor EI Front view product description Model 166V3LA o AUTO W A lt 0K IA e e e Model 166V3L ZN AUTO W Ja A Ei Switch monitors power ON and l o OFF Access the OSD menu e E ok Confirm the OSD adjustment o 4 Return to previous OSD level Adjust the brightness level AV Adjust the OSD menu q Adjust the speaker volume fo Change display format AUTO Automatically adjust the monitor Downloaded from ManualMonitor com Mamtals 2 Setting u
15. devices as described in EN 55022 unless it is specifi cally stated that it is a Class A device on the specification label The following applies to devioss in Class A of EN 55022 radius of protection up to 30 meters The user of the device is obliged to take all steps necessary to remove sources of interference to tele communication or other deviose Pokud neni na typov m titku po ita e uvedeno e spad do do tfidy A pod e EN 56022 spad automaticky do tfidy B podle EN 55022 Pro zafizeni za azen do tfidy A chrann p smo 30m podle EN 55022 plat n sleduj c Dojde li k ru en telekornunikatnich nebo n ch zafizeni je u ivatel povinnen prov st takov opatfgni aby ru en odstranil Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit a three prong socket All equipment that works together computer monitor printer and so on should have the same power supply source The phasing conductor of the room s electrical installation should have a reserve short circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes A To completely switch off the equipment the power supply cable must be removed from the power supply socket which should be located near the equipment and easily accessible A protection mark B confirms that the equipment is in compliance with the protection usage require
16. ds 1509241 307 2008 Ergonomic requirement Analysis and compliance test methods for electronic visual displays Downloaded from ManualMonitor com Mardals 6 Regulatory Infomation Energy Star Declaration www energystargov es As an ENERGY STAR Partner we have determined that this product at meets the ENERGY STAR guidelines for energy efficiency amp Note We recommend you switch off the monitor when it is not in use for a long time Federal Communications Commission FCC Notice U S Only amp This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equ
17. duit utilise et peut mettre des hyperfr quences qui si l appareil n est pas install et utilis selon les consignes donn es peuvent causer des interf rences nuisibles aux communications radio Downloaded from ManualMonitor com Ma dals 6 Regulatory Infomation Cependant rien ne peut garantir l absence d interf rences dans le cadre d une installation particuli re Si cet appareil est la cause d interf rences nuisibles pour la r ception des signaux de radio ou de t l vision ce qui peut tre d cel en fermant l quipement puis en le remettant en fonction l utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes R orienter ou d placer l antenne de r ception e Augmenter la distance entre l quipement et le r cepteur Brancher l quipement sur un autre circuit que celui utilis par le r cepteur e Demander l aide du marchand ou d un technicien chevronn en radio t l vision Toutes modifications n ayant pas re u l approbation des services comp tents en mati re de conformit est susceptible d interdire l utilisateur l usage du pr sent quipement N utiliser que des c bles RF arm s pour les connections avec des ordinateurs ou p riph riques CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA EN 55022 Compliance Czech Republic Only This devica belongs to category B
18. e Settings tab Under the setting tab in box labelled desktop area move the sidebar to 1366 x 768 pixels e Open Advanced Properties and set the Refresh Rate to 60 Hz then click OK e Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1366 x 768 60 Hz Shut down your computer disconnect your old monitor and reconnect your Philips LCD monitor e Turn on your monitor and then turn on your PC Q2 What is the recommended refresh rate for LCD monitor Ans Recommended refresh rate in LCD monitors is 60 Hz In case of any disturbance on screen you can set it up to 75 Hz to see if that removes the disturbance Q3 What are the inf and icm files on the CD ROM How do install the drivers inf and icm Ans These are the driver files for your monitor Follow the instructions in your user manual to install the drivers Your computer may ask you for monitor Downloaded from ManualMonitor com Mantals 8 Troubleshooting amp FAQs Q4 Ans Q5 Ans Q6 Ans Q7 Ans Q8 Ans drivers inf and icm files or a driver disk when you first install your monitor Follow the instructions to insert the companion CD ROM included in this package Monitor drivers inf and icm files will be installed automatically How do I adjust the resolution Your video card graphic driver and monitor together determine the available resolutions You ca
19. e algorithm for fast processing and response this Windows 7 compliant eye catching animated Icon based software is ready to enhance your experience with Philips monitors E Installation e Follow the instruction and complete the installation You can launch after installation is completed e If you want to launch later you can either click the shortcut on desktop or toolbar Monitor driver and software installation Z PC mung Wnt 7 Van Z A Ca ta m pa A A O A A PM o han w mt nn 1 large tey Irfan omnes tem Pore tam Rann Parana umy Chest E Ca ia mae eee pare rem mare pte A m O en First launch Wizard e The first time after installation of SmartControl Lite it will automatically go to Wizard for first time launch e The wizard will guide you through adjusting your monitor performance step by step e You can go to Plug in menu to launch wizard later on as well e You can adjust more options without wizard by Standard pane Downloaded from ManualMonitor com Mantials 3 Image Optimization Lol SmartControl Lite ein jo i wur Mertens 2 Peles 2200 onon DX PHILIPS Wizard EI Start with Standard pane Adjust menu e Adjust Menu allow you to adjust Brightness Contrast Focus Position and Resolution e You can follow the instruction and do the adjustment Cancel prompts user if you want to cancel installation oma Sma
20. egisters the product Please visit www epeat net for registration status in your country This data is subject to change without notice Go to www philips com support to download the latest version of leaflet p Downloaded from ManualMonitor com Manfals 4 Technical Specifications 4 1 Resolution amp Preset Modes Ef Maximum Resolution 1366 x 768 60 Hz analog input 1366 x 768 Q 60 Hz digital input El Recommended Resolution 1366 x 768 Q 60 Hz digital input SJ 720 x 400 70 09 Sl 640 x 480 SZ 37 88 800 x 600 60 32 48 36 1024 x 768 60 00 Aa 1366x 768 529 amp Note Please notice that your display works best at native resolution of 1366 x 768 60Hz For best display quality please follow this resolution recommendation Downloaded from ManualMonitor com Mar als 5 Power Management 5 Power Management If you have VESA DPM compliance display card or software installed in your PC the monitor can automatically reduce tts power consumption when not in use If an input from a keyboard mouse or other input device is detected the monitor will wake up automatically The following table shows the power consumption and signaling of this automatic power saving feature 166V3LA VESA Made Video H sync V sync Power Used LED Color Active ON Yes Yes 8 9W typ White Sleep White Standby OFF No No lt 0 5W typ blink Switch Of OFF 5
21. en in this manual have been followed 1 2 Notational Descriptions The following subsections describe notational conventions used in this document Notes Cautions and Warnings Throughout this guide blocks of text may be accompanied by an icon and printed in bold or italic type These blocks contain notes cautions or warnings They are used as follows amp Note This icon indicates important information and tips that help you make better use of your computer system Caution This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data A Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem Some warnings may appear in alternate formats and may not be accompanied by an icon In such cases the specific presentation of the warning is mandated by the relevant regulatory authority Downloaded from ManualMonitor com Martuals 1 Important 1 3 Disposal of product and packing material Waste Electrical and Electronic Equipment WEEE This marking on the product or on its packaging illustrates that under European Directive 2002 96 EC governing used electrical and electronic appliances this product may not be disposed of with normal household waste You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection To determine the locations for dropping
22. ipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device To prevent damage which may result in fire or shock hazard do not expose this appliance to rain or excessive moisture THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo United States Only FE This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Commission Federale de la Communication FCC Declaration amp Cet quipement a t teste et d clar conforme auxlimites des appareils numeriques de class B aux termes de l article 15 Des r gles de la FCC Ces limites sont con ues de fa on a fourir une protection raisonnable contre les interf rences nuisibles dans le cadre d une installation residentielle CET appareil pro
23. it When Enable task tray menu is disabled the task tray icon will only display EXIT e Run at Startup is checked On by default When disabled SmartControl Lite will not launch at start or be in the task tray The only way to launch SmartControl Lite is either from the desktop short cut or from the program file Any preset set to run rl A et Downloaded from ManualMonitor com Maildals 3 Image Optimization at startup will not load when this box is unchecked Disabled e Enable transparency mode Windows 7 Vista XP Default is 07 Opaque Options gt Input Will only be active when selecting Input from the drop down Options menu On a non supported display capable of DDCICI only the Help and Options tabs are available All other SmartControl Lite tabs are not available ao SmartControl Lite x a ja ja je z EL Arge ower e Display the Source instruction pane and current input source setting On single input displays this pane will not be visible Options gt Audio Will only be active when selecting Audio from the drop down Options menu On a non supported display capable of DDC Cl only the Help and Options tabs are available Ban Tr WAWY DE SmartControl Lite PHILIPS Audio a Help gt User Manual Will only be active when selecting User Manual from the drop down Help menu On a non supported display capable of DDC CI only the Hel
24. ls defects of the same type that are near to one another may be more noticeable Philips also specifies tolerances for the proximity of pixel defects Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables ACCEPTABLE LEVEL 2 adjacent lit subpixels 3 adjacent lit subpixels one white pixel Distance between two bright dot defects Total bright dot defects of all types BLACK DOT DEFECTS 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects Total black dot defects of all types TOTAL DOT DEFECTS amp Note 1 1 or 2 adjacent sub pixel defects 1 dot defect ACCEPTABLE LEVEL 5 or fewer 2 or fewer gt 15mm ACCEPTABLE LEVEL Total bright or black dot defects of all types 2 This monitor is ISO9241 307 compliant ISO9241 307 Ergonomic requirement analysis and compliance test methods for electronic visual displays Downloaded from ManualMonitor com Martals 7 Customer care and warranty 7 2 Customer Care amp Warranty For warranty coverage information and additional support requirement valid for your region please visit www philips com support website for details You may also contact your local Philips Customer Care Cente
25. ments of standards PN 93 T 42107 and PN 89 E 06251 Wymagania Polskiego Centrum Badan i Certyfikacji Urz dzenie powinno by zasilane z gniazda z przy czonym obwodem ochronnym gniazdo z ko kiem Wsp pracuj ce ze sob urz dzenia komputer monitor drukarka powinny by zasilane 2 tego samego r d a Instalacja elektryczna pomieszczenia powinna zawiera w przewodzie fazowym rezerwow ochron przed zwarciami w postaci bezpiecznika o warto ci znamionowej nie wi kszej ni 16A amper w W celu ca kowitego wy czenia urz dzenia z sieci zasilania nale y wyj wtyczk kabla zasilaj cego z gniazdka kt re powinno znajdowa sig w pobli u urz dzenia by atwo dost pne Znak bezpiecze stwa B potwierdza zgodno urz dzenia z wymaganiami bezpiecze stwa u ytkowania zawartymi w PN 937T 42107 i PN B9 E 406251 Pozosta e instrukcje bezpiecze stwa Nie nale y u ywa wtyczek adapierowych lub usuwa ko ka obwodu ochronnego z wtyczki Je eli konseczne jest u ycie przed u acz to nale y u y przed u acza 3 y owega z prawid owo po czonym przewodem ochronnym System komputerowy nale y zabezpieczy przed nag ymi chwilowymi wzrostami lub spad i napi cia u ywaj c eliminatara przepi urz dzenia dopasawuj cego hub bezzakl ceniowege r d a zasilania Nale y upewni sig aby nic nie le a o na kablach systemu komputerowego oraz aby kable nie byty umieszczone w miej
26. n select the desired resolution under Windows Control Panel with the Display properties What if get lost when am making monitor adjustments via OSD Simply press the OK button then select Reset to recall all of the original factory settings Is the LCD screen resistant to scratches n general it is recommended that the panel surface is not subjected to excessive shocks and is protected from sharp or blunt objects When handling the monitor make sure that there is no pressure or force applied to the panel surface side This may affect your warranty conditions How should clean the LCD surface For normal cleaning use a clean soft cloth For extensive cleaning please use isopropyl alcohol Do not use other solvents such as ethyl alcohol ethanol acetone hexane etc Can change the color setting of my monitor Yes you can change your color setting through OSD control as the following procedures Press OK to show the OSD On Screen Display menu Press Down Arrow to select the option Color then press OK to enter color setting there are three settings as below 1 Color Temperature The two settings are 6500K and 9300K with settings in the 6500K range the panel appears warm with a red white color tone while a 9300K temperature yields cool bluewhite toning sRGB this is a standard setting for ensuring correct exchange of colors between different device e g digital c
27. onia NA FUJITSU 372 6519900 Latvia NA ServiceNet LV Ltd 371 7460399 Lithuania NA UAB Servicenet 370 7400088 Romania NA Blue Ridge Intl 40 21 2101969 see NA Kim Tec d o o 381 11 20 70 684 Montenegro Slovenia NA PC H and 386 1 530 08 24 NA Comel 380 562320045 Ukraine NA Topaz Service Company 38 044 245 73 31 ane NA CPS 7 495 645 6746 for repair ussia NA CEEE Partners 7 495 645 3010 for sales Slovakia NA Datalan Service 9202270072155 Turkey NA Techpro 10 212 k5 4 632 Czech Rep NA Asupport 800 100 697 NA Serware TIO 1 240635 Hungary NA Profi Service 36 1 814 8080 Contact Information for LATIN AMERICA region Country Call center Consumer care number Brazil 0800 7254101 Vermont Argentina 0800 3330 856 Contact Information for China China Consumer care number 4008 800 008 Contact Information for NORTH AMERICA Country Call center ASC Consumer care number Canada Supercom er Downloaded from ManualMonitor com Mardals 7 Customer care and warranty Contact Information for APMEA region Country Call center ASC Consumer care number Australia NA AGOS NETWORK PTY LTD 1300 360 386 New Zealand NA Visual Group Ltd 0800 657447 Hong Kong 1 Hong Kong Tel 852 2619 9639 Macau NA A Macau Tel 853 0800 987 Tel 1 800 425 6396 India A REDINGTON INDIA LTD SMS PHILIPS to 56677 z 5 Tel
28. p and Options tabs are available kawie 2 Petes 12503 CS26715000001 DR SmartControl Lite PHILIPS je je la je jm BIUR Downloaded from ManualMonitor com Mardals Help gt Version Will only be active when selecting Version from the drop down Help menu On a non supported display capable of DDC CI only the Help and Options tabs are available Bree 2 Pade 22583 osrin DR SmartControl Lite PHILIPS HE a R Rie ie ie Context Sensitive menu The Context Sensitive menu is Enabled by default If Enable Context Menu has been checked in the Options gt Preferences pane then the menu will be visible a SmartControl Select Preset gt Tune Display The Context Menu has three entries e SmartControl Lite When selected the About Screen is displayed Select Preset Provides a hierarchical menu of saved presets for immediate use A check mark shows the currently selected preset Factory Preset can also be called from the drop down menu e Tune Display Opens the SmartControl Lite control panel Task Tray Menu Enabled The task tray menu can be displayed by right clicking on the SmartControl Lite icon from the task tray Left Click will launch the application Help Technical Support Check for Update About Exit The task tray has five entries e Help Access to User Manual file Open User Manual file using the default browser window e Technical Support displays the tech sup
29. p the monitor EJ Description of the On Screen Display The OSD Menu What is On Screen Display OSD Below is an overall view of the structure of the On Screen Display You can use this as a reference when you want to work your way around the different adjustments later on On Screen Display OSD is a feature in all Philips LCD monitors It allows an end user to adjust screen performance or select functions of the monitors directly through an on screen Main menu Sub menu instruction window A user friendly on screen display interface is shown as below VGA Input Model 166V3LA BM available for selective models r Picture Format Wide Screen 4 3 Picture Brightness 0 100 fr Contrast 0 100 L SmartContrast On Off m Stand Alone On Off Audio Mute On Off available for selective models m Color Temperature 6500K 9300K t Color sRGB User Define r Red 0 100 r Green 0 100 Blue 0 100 Language English Espanol Francais Deutsch Italiano Portugu s Pycckui fai KFA SZ T rk e r Horizontal 0 100 t OSD Settings Vertical 0 100 Transparency Off 1 2 3 4 LUUUOUUU MMM OSD Time Out 5s 10s 20s 30s 60s L Setup r Auto H Position 0 100 I V Position 0 100 Phase 0 100 Clock 0 100 Basic and simple instruction on the control u en m OREO
30. port page Check for Update takes the user to PDI Landing and checks the user s version against the most current available e About Displays detailed reference information product version release information and product name Exit Close SmartControl Lite To run SmartControl Lite again either select SmartControl Lite from Program menu double click the desktop PC icon or restart the system PHILIPS SmartControl Version 1 20 dhune ztarciard 2007 01 04 1151 23 Copyright 1083 2007 Pertrad Displays inc Paterts Pending Downloaded from ManualMonitor com Mantials Task Tray Menu Disabled When the Task Tray is disabled in the preference folder only the EXIT selection is available To completely remove SmartControl Lite from the task tray disable Run at Startup in Options gt Preferences Downloaded from ManualMonitor com Marltals 4 Technical Specifications 4 Technical Specifications User Convenience Monitor Panel Type TFI LCD Backlight LED Panel Size 15 6 W 39 6cm Aspect Ratio 16 9 Pixel Pitch 0 252 x 0 252 mm Brightness 200 cd m SmartContrast 10 000 000 1 Contrast Ratio typ 500 1 Response Time typ 8ms Optimum Resolution 1366 x 768 60Hz Viewing Angle 90 H 50 V C R gt 10 Display Colors 262K Vertical Refresh Rate 56Hz 63Hz Horizontal Frequency 30kHz 60kHz sRGB MES Connectivity Signal Input DVI digital VGA
31. puters notebooks and monitors based on their environmental attributes EPEAT also provides a clear and consistent set of performance criteria for the design of products and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products Benefits of EPEAT Reduce use of primary materials Reduce use of toxic materials Avoid the disposal of hazardous waste EPEAT S requirement that all registered products meet ENERGY STAR s energy efficiency specifications means that these products will consume less energy throughout their life CE Declaration of Conformity This product is in conformity with the following standards EN60950 1 2006 Safety requirement of nformation Technology Equipment EN55022 2006 Radio Disturbance requirement of Information Technology quipment N55024 1998 A1 2001 A2 2003 mmunity requirement of Information echnology Equipment N61000 3 2 2006 Limits for Harmonic Current Emission e EN61000 3 3 1995 A1 2001 A2 2005 Limitation of Voltage Fluctuation and Flicker following provisions of directives applicable e 2006 95 EC Low Voltage Directive e 2004 108 EC EMC Directive e 2005 32 EC EuP Directive EC No 1275 2008 mplementing Directive for Standby and Off mode power consumption and is produced by a manufacturing organization on ISO9000 level a The product also comply with the following standar
32. r care and warrant 7 1 Philips Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products We use some of the industry s most advanced manufacturing processes and practice stringent quality control However pixel or sub pixel defects on the TFT Monitor panels used in flat panel monitors are sometimes unavoidable No manufacturer can guarantee hat all panels will be free from pixel defects but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty This notice explains he different types of pixel defects and defines acceptable defect levels for each type In order qualify for repair or replacement under warranty the number of pixel defects on a TFT onitor panel must exceed these acceptable evels For example no more than 0 0004 of he sub pixels on a monitor may be defective Furthermore Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others This policy is valid worldwide Ba ze a GB e Pixels and Sub pixels A pixel or picture element is composed of three sub pixels in the primary colors of red green and blue Many pixels together form an image When all sub pixels of a pixel are lit the three colored sub pixels together appear as a single white pixel When all are dark the three colored sub pixels
33. r number listed below Contact Information for WESTERN EUROPE region Country ASC Consumer care number Price Germany Siemens I amp S 49 01803 386 853 0 09 United Kingdom Invec Scotland 44 0207 949 0069 Local call tariff lreland Invec Scotland 353 01 601 1161 Local call tariff Spain Eatsa Spain 34 902 888 785 0 10 Finland A novo 358 09 2290 1908 Local call tariff France A novo 33 082161 1658 0 09 Greece Allman Hellas 30 00800 3122 1223 Free of charge taly A novo 39 840 320 041 0 08 Netherlands E Care 31 0900 0400 063 0 10 Denmark A novo 4505591518761 Local call tariff Norway A novo 47 2270 8250 Local call tariff Sweden A novo 46 08 632 0016 Local call tariff Poland Zolter 48 0223491505 Local call tariff Austria Siemens I amp S 43 0810 000206 0 07 Belgium Here 32 078 250851 0 06 Luxembourg E Care 352 26 84 30 00 Local call tariff Portugal Eatsa Spain al 2 Sse 1440 Local call tariff Switzerland A novo 1029306 Local call tariff Downloaded from ManualMonitor com Ma Bals 7 Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region Country Callcenter ASC Consumer care number Belarus NA IBA TWS 7 227 SKIS Bulgaria NA LAN Service 359 2 960 2360 Croatia NA Renoprom FS te Est
34. ring operation Do not knock or drop the monitor during operation or transportation Maintenance Downloaded from ManualMonitor com Mantals To protect your monitor from possible damage do not put excessive pressure on the LCD panel When moving your moni tor grasp the frame to lift do not lift the monitor by placing your hand or fingers on the LCD panel Unplug the monitor if you are not going to use it for an extensive period of time Unplug the monitor if you need to clean it with a slightly damp cloth The screen may be wiped with a dry cloth when the power is off However never use organic solvent such as alcohol or ammonia based liquids to clean your monitor To avoid the risk of shock or permanent damage to the set do not expose the monitor to dust rain water or excessive moisture environment f your monitor gets wet wipe it with dry cloth as soon as possible f foreign substance or water gets in your monitor please turn the power off immedi ately and disconnect the power cord Then remove the foreign substance or water and send it to the maintenance center Do not store or use the monitor in loca ions exposed to heat direct sunlight or extreme cold n order to maintain the best performance of your monitor and use it for a longer life ime please use the monitor in a location hat falls within the following temperature and humidity ranges 1 Important
35. rtControl Lite 2 a z Besten son 2 Peden 22581 CSE713000001 20 kam SmartControl Lite SmartControl Lite SmartControl Lite BIURA je Downloaded from ManualMonitor com Manals 2 mi s 2288 osrin PJ PHILIPS 2 mn 22581 osrin BJ PHILIPS i G 2 Pis 22881 osrin DX 3 Image Optimization SmartControl Lite Color menu Color Menu allow you to adjust RGB Black 3 Peles 22581 onson DX PHILIPS Level White Point and Color Calibration e You can follow the instruction and do the adjustment e Refer to below table for sub menu item base on your input Example for Color Calibration SmartControl Lite je a io sa Downloaded from ManualMonitor com Manuals 2 mam zz wio X PHILIPS Level wd resit n a bas of Adee Me Blach Lewed Sor Ge Se Gs ora SmartContro Lite fs m 3 Dat Carre omen SmartControl Lite SmartControl Lite 3 miga 22381 CX2571 006001 AIR PHILIPS 2 Pis 22581 osrin PK PHILIPS ul akon Li Te atut Gamma Smartivage mat be set to OF Och Be Smartimage OF button before ating L Une the shor ta select the dared Garren D brute coe abee O ft GEIA coliboaton wen ow S Patent Na CAAD 3 Image Optimization 1 2 6 Show Me starts color calibration tutorial Start starts the 6 step color calibration sequence
36. scu gdzie mo na by oby na nie nadeptywad lub potyka si o nie Nie nale y rozlewa napoj w ani innych p yn w na system komputerowy Nie nale y wpycha adnych przedmiot w do atwor w systemu komputerowego gdy mo e to spowodowa po ar lub pora enie pr dem poprzez zwarcie clemenkiw wewn trznych System komputerowy powinien znajdowa si z dala od grzejnik w i r de ciep a Ponadto mie nale y blakowa otwor w wentylacyjnych Nale y unika k adzenia lu nych papier w pod komputer oraz umieszczania komputera w ciasnym miejscu bez ma liwa ci cyrkulacji powi eirza wak niego Downloaded from ManualMonitor com Mar dals 6 Regulatory Infomation North Europe Nordic Countries Information Placering Ventilation VARNING FORSAKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG AR LATATKOMLIGA NAR DU ST LLER DIN UTRUSTNING PAPLATS Placering Ventilation ADVARSEL S RG VED PLACERINGEN FOR AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGAENGELIGE Paikka llmankierto VAROITUS SIJOITA LAITE SITEN ETTA VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA Plassering Ventilasjon ADVARSEL NAR DETTE UTSTYRET PLASSERES MA DU PASSE PA AT KONTAKTENE FOR STOMTILFORSEL ER LETTE A NA BSMI Notice Taiwan Only PACMAN ARE Ergonomie Hinweis nur Deutschland Der von uns gelieferte Farbmonitor entspricht den in der Verordnung ber den Schutz vor Sch den d
37. stomer service representative Ell Common Problems No Picture Power LED not lit e Make sure the power cord is plugged into the power outlet and into the back of the monitor e First ensure that the power button on the front of the monitor is in the OFF position then press it to the ON position No Picture Power LED is White e Make sure the computer is turned on e Make sure the signal cable is properly connected to your computer e Make sure the monitor cable has no bent pins on the connect side If yes repair or replace the cable e The Energy Saving feature may be activated Screen says Attention Check cable connection e Make sure the monitor cable is properly connected to your computer Also refer to the Quick Start Guide Check to see if the monitor cable has bent pins e Make sure the computer is turned on AUTO button doesn t function e The auto function is applicable only in VGA Analog mode If the result is not satisfactory you can do manual adjustments via the OSD menu amp Note The Auto Function is not applicable in DVI Digital mode as it is not necessary Visible signs of smoke or sparks Do not perform any troubleshooting steps Disconnect the monitor from mains power source immediately for safety e Contact with Philips customer service representative immediately El Imaging Problems Image is not centered e Adjust the image position using the A
38. ting instructions and upon presentation of the original invoice or cash receipt indicating the date of purchase dealer s name and model and production number of the product 1 1 Safety precautions and mainte nance A Warnings Use of controls adjustments or procedures other than those specified in this documentation may result in exposure to shock electrical hazards and or mechanical hazards Read and follow these instructions when connecting and using your computer monitor Operation e Please Keep the monitor out of direct sunlight very strong bright lights and away from any other heat source Lengthy exposure to this type of environment may result in discoloration and damage to the monitor e Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor s electronics e Do not block the ventilation holes on the cabinet When positioning the monitor make sure the power plug and outlet are easily ac cessible If turning off the monitor by detaching the power cable or DC power cord wait for 6 seconds before attaching the power cable or DC power cord for normal operation Please use approved power cord provided by Philips all the time If your power cord is missing please contact with your local service center Please refer to Customer Care Consumer Information Center Do not subject the monitor to severe vibration or high impact conditions du
39. together appear as a single black pixel Other combinations of lit and dark sub pixels appear as single pixels of other colors Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways There are two categories of pixel defects and several types of sub pixel defects within each category Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or on That is a bright dot is a sub pixel that stands out on the screen when the monitor displays a dark pattern There are the types of bright dot defects G R B One lit red green or blue sub pixel P R C Two adjacent lit sub pixels Red Blue Purple Red Green Yellow Green Blue Cyan Light Blue Three adjacent lit sub pixels one white pixel Downloaded from ManualMonitor com Manfals 7 Customer care and warranty amp Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or off That is a dark dot is a sub pixel that stands out on the screen when the monitor displays a light pattern These are the types of black dot defects u BRIGHT DOT DEFECTS 1 lit subpixel Proximity of Pixel Defects Because pixel and sub pixe
40. urch R ntgenstrahlen festgelegten Vorschriften Auf der R ckwand des Ger tes befindet sich ein Aufkleber der auf die Unbedenklichkeit der Inbetriebnahme hinweist da die Vorschriften ber die Bauart von St rstrahlern nach Anlage lIl a 5 Abs 4 der R ntgenverordnung erf llt sind Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht ist darauf zu achten da 1 Reparaturen nur durch Fachpersonal durchgef hrt werden 2 nur original Ersatzteile verwendet werden 3 bei Ersatz der Bildr hre nur eine bauartgleiche eingebaut wird Aus ergonomischen Gr nden wird empfohlen die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden schlechte Lesbarkeit und erh hte Augenbelastung bei zu geringem Zeichenkontrast w ren die Folge Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 betr gt 70dB A oder weniger ACHTUNG BEIM AUFSTELLEN DIESES GERATES DARAUF ACHTEN DAB NETZSTECKER UND NETZKABELANSCHLUB LEICHT ZUGANGLICH SIND Downloaded from ManualMonitor com Mantials 6 Regulatory Infomation China RoHS The People s Republic of China released a regulation called Management Methods for Controlling Pollution by Electronic Information Products or commonly referred to as China RoHS All products including CRT and Monitor which are produced and sold for China market have to meet China RoHS request PERIABROHS REPAR RFR ET SRS EINE BARAFEABIROHS
41. uto function in OSD Main Controls Adjust the image position using the Phase Clock of Setup in OSD Main Controls It is valid only inVGA mode Image vibrates on the screen e Check that the signal cable is properly securely connected to the graphics board or PC Vertical flicker appears man NUN e Adjust the image using the Auto function in OSD Main Controls e Eliminate the vertical bars using the Phase Clock of Setup in OSD Main Controls It is valid only inVGA mode Horizontal flicker appears EJ A e Adjust the image using the Auto function in OSD Main Controls Downloaded from ManualMonitor com Manilals 8 Troubleshooting amp FAQs e Eliminate the vertical bars using the Phase Clock of Setup in OSD Main Controls It is valid only in VGA mode Image appears blurred indistinct or too dark e Adjust the contrast and brightness on On Screen Display An after image burn in or ghost image remains after the power has been turned off e Uninterrupted display of still or static images over an extended period may cause burn in also known as after imaging or ghost imaging on your screen Burn in after imaging or ghost imaging is a well known phenomenon in LCD panel technology In most cases the burned in or after imaging or ghost imaging will disappear gradually over a period of time after the power has been switched off
42. y over a period of time after the power has been switched off Always activate a moving screen saver program when you leave your monitor unattended Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content A Warning Severe burn in or after image or ghost image symptoms will not disappear and cannot be repaired The damage mentioned above is not covered under your warranty Q12 Why is my Display not showing sharp text and is displaying jagged characters Ans Your LCD monitor works best at its native resolution of 1366 x 768 60 Hz For best display please use this resolution Downloaded from ManualMonitor com Mantials PHILIPS 2011 Koninklijke Philips Electronics N V All rights reserved Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N V and are used under license from Koninklijke Philips Electronics N V Specifications are subject to change without notice Version M3166V1T Downloaded from ManualMonitor com Manuals
Download Pdf Manuals
Related Search