Home

operation - iFoodEquipment.com

image

Contents

1. IvVNNVWN 43SN INSTALLATION IMPORTANT MUST READ BEFORE INSTALLATION e Install unit where there is proper ventilation in the area where it will operate e If the unit has recently been transported please let unit stand motionless for a minimum period of 24 hours before plugging it in e Do not plug in unit until all accessories are installed shelves shelf clips casters e Confirm the unit drops down to desired temperature before loading with product e Please read through the manual in its entirety Cabinet Location Install the unit on a strong and level surface Unit may make loud noises or may malfunction if the installation surface is uneven Install the unit in an indoor well ventilated area for better efficiency For best performance maintain 4 clearance on the back and sides of the unit Do not use unit outdoors Avoid installation in a high humidity and or dusty area Humidity can cause unit to rust and will decrease its efficiency Dust collected on condenser coil will cause a malfunction clean condenser at least once a month with a brush or clean cloth Malfunction due to dirty condenser will void warranty Select a location away from heat and moisture generating equipment High ambient temperatures will cause the compressor to overwork leading to higher energy bills and gradual breakdown of unit Malfunction due to high ambient temp
2. Metalfrio determines have been subjected to alteration neglect abuse misuse accident damage during transit or installation fire flood or act of God afterthe date of manufacture Improper Electrical Connections Metalfrio is not responsible for the repair or replacement of failed or damaged components resulting from electrical power failure the use of extension cords low voltage or voltage drops to the unit Metalfrio reserves the right to invoice and collect from the customer for actual and replacement costs inthe eventthe warranty claim is deemed to be a nuisance claim and not associated with a defective product or part Metalfrio reserves the right to replace parts or equipment with equal value The customer is responsible for transportation
3. d and customer is responsible for all such labor charges Metalfrio shall have the option at its sole and absolute discretion to replace parts or equipment with new or refurbished equipment of equal value and utility Service provided by other than an authorized Metalfrio service agent dispatched by Metalfrio shall void the warranty Limitations and Exclusive Remedy Normal wear and tear or gradual deterioration and depreciation is excluded from this warranty Exterior Interior structural damage dings and dents due to on site abuse is excluded from this warranty Light bulb replacement is excluded from this warranty The parts and labor warranty is the sole exclusive warranty remedy offered by Metalfrio All other warranties either expressed or implied arising under law or equity of customer of the trade included but not limited to warranties of merchantability of fitness for a particular purpose are excluded Metalfrio and its service agents shall not be liable for any incidental or consequential loss or damages included by not limited to food loss product loss ice cream loss personal injury or property damage whether it is based on a contract claim or tort including negligence or strict liability arising out of equipment or service provided hereunder Alteration Neglect Abuse Misuse Accident Damage During Transit or Installation Fire Food Acts of God Metalfrio is not responsible for the repair or replacement of any parts that
4. erature will void warranty Electrical e Ensure that the required voltage of the compressor is being supplied at all times Low or high voltage can be detrimental to the refrigeration unit All units should be connected into a grounded and properly sized electrical outlet with appropriate over current protection Refer to the electrical requirements on the nameplate of the unit If you have questions regarding the grounding connection contact your dealer e Ensure that the unit has its own dedicated outlet Do not use an extension cord Temperature Controls The temperature controls are factory set to maintain an average temperature of 38 F in refrigerators and OF in freezers To maintain a different temperature simply adjust the up and down arrows located on the temperature display panel To decrease the temperature colder push the down arrow and to increase the temperature warmer push the up arrow CAUTION Setting the temperature control to the coldest setting may cause the evaporator coil to freeze and ice up This will eventually result in a warmer cabinet temperature OPERATION Loading Product Shelves have been factory installed for your convenience Before loading shelves be sure that all shelf clips are completely fastened in their correct locations It is important that all shelves rest completely level before stocking your cabinet with product In order to maintain correct air flow inside the unit be sure to
5. gnate one outlet for your unit only e Do not use extension cords e Do not put your hands under the unit when moving it e When the unit is not in use for a long period of time unplug electrical cord from outlet e After unplugging the unit wait at least 10 minutes before plugging it in again Failure to do so could cause damage to the compressor UNPLUG CORD To minimize shock and fire hazards do not plug or unplug the cord with wet hands e During maintenance and cleaning make sure unit is unplugged PROPER GROUNDING REQUIRED To minimize shock and fire hazards make sure the unit is properly grounded WARNINGS Do not attempt to remove or repair any component unless instructed by a factory service representative e Make sure the unit is not resting on or against the electrical cord and plug e To minimize personal injury do not hang on the doors e Do not store any flammable and explosive gas or liquids inside the unit e Do not attempt to alter or tamper with the electrical cord or plug CONDENSER COIL For efficient operation it is important that the condenser surface be kept free of dust dirt and lint It is recommended that the condenser coil and fins be cleaned at least once per month Clean with a commercial condenser coil cleaner available from any kitchen equipment dealer Brush the condenser fins from top to bottom not side to side FAN BLADES AND MOTOR If necessary clean the fan blades and motor with a s
6. leave 4 of space between the back wall and stored product Blocking the evaporator fans will result in a warmer cabinet temperature ultimately compressor failure Defrost Systems Refrigerator coils are kept below the freezing point 32 F During compressor downtime the evaporator fan continues to circulate air through the evaporator coil This air circulation raises the coil temperature above the freezing point melting any accumulated frost Runoff water is drained into the evaporator pan and evaporated Freezer coils are defrosted electrically Automatic defrost timers are built in to the refrigeration system and may not be adjusted The defrost timers automatically initiate at pre set intervals and for a pre determined duration PLEASE NOTE Excessive door openings should be avoided in order to maintain cabinet temperature and to eliminate the possibility of coil freeze up Loading Food Pans Pizza and sandwich prep units are designed to function with all insert pans in place even if some pans are left empty For maximum food freshness fill the pans with only an amount that can be used in a specific usage period During non use please close the insulated lid cover SAFETY CLEANING Please pay close attention to the safety notices in this section Disregarding these notices may lead to serious injury and or damage to the unit ATTENTION e To minimize shock and fire hazards be sure not to overload electrical outlet Desi
7. oft cloth UNIT INTERIOR When cleaning the cabinet interior use a solvent of warm water and mild soap Do not use steel wool caustic soap abrasive cleaners or bleach These items can damage the stainless steel surface Wash door gaskets on a regular basis preferably weekly Simply remove door gasket from the frame of the door soak in warm water and mild soap for 30 minutes dry with a soft cloth and replace Check door gaskets for proper seal after they are replaced Periodically remove the shelves and pilasters from the unit and clean them with mild soap and warm water To remove the pilasters you must first remove the shelves and the shelf brackets Then simply pull the pilasters up an out Reinstall in the reverse order m z gt lt on O WARNING Disconnect power cord before cleaning any parts of the unit Troubleshooting Before contacting a technician review these procedures TROUBLE POSSIBLE CAUSES SOLUTIONS Compressor not running Condensing unit runs for long periods of time Cabinet temperature is too warm Cabinet is noisy Fuse blown or circuit breaker tripped Power cord unplugged Thermostat set too high Unit in defrost cycle Excessive amount of warm product placed in cabinet Prolonged door opening or door ajar Door gasket s not sealing properly Dirty condenser coil Evaporator coil iced over Thermostat set too warm Air flow blocked Excessive amount of wa
8. rm product in cabinet Fuse blown or circuit breaker tripped Dirty condenser coil Prolonged door opening or door left ajar Evaporator coil iced over Loose part s Tubing vibration Replace fuse or reset circuit breaker Plug in power cord Set thermostat to lower temperature Wait for defrost cycle to finish Allow adequate time for product to cool down Ensure doors are closed when not in use Avoid opening doors opening doors for long periods of time Ensure gaskets are snapped in completely Remove gasket and clean Check gasket condition and replace if necessary Clean condenser coil Unplug unit and allow coil to defrost Make sure thermostat is not set too cold Make sure door gasket s are sealing properly Set thermostat to lower temperature Rearrange product to allow proper airflow Make sure there is at least 4 clearance from evaporator Allow adequate time for product to cool Replace fuse or reset circuit breaker Clean the condenser coil Ensure doors are closed when unit not in use Avoid opening doors for long periods of time See above Locate and tighten loose part s Ensure tubing is free from contact with other tubing or components NEW EQUIPMENT SALES WARRANTY Metalfrio Solutions Inc Metalfrio provides a warranty on Metalfrio commercial cooler and freezer self contained products as follows The equipment supplied shall be free of manufact
9. uring defects for a period of eighteen 18 months from the date of original purchase as indicated by paid invoice or according to terms specified on the invoice or contract unless otherwise noted on special purchases All original records with equipment serial number s should be retained for warranty confirmation purposes The factory identification label on the back of all units must be kept adhered to the unit for serial number confirmation during the full 18 month warranty period e Parts Warranty Metalfrio warrants that cooling system parts compressor fan motor and thermostats supplied shall be free of defects in material and workmanship for a period of eighteen 18 months from date of original purchase The parts warranty provides repair or replacement of these same parts at Metalfrio s discretion of parts found to be defective Customer could be required at Metalfrio s request to ship defective parts back to the company Compressors are covered for a period of five 5 years 18 months with parts and service coverage and the remaining 3 1 2 years as part replacement only Labor Warranty During the first 18 months Metalfrio provides a warranty on labor to install or repair the parts referenced above compressor fan motor and thermostats Labor includes reasonable straight time labor charges to install or repair named parts For any period extending beyond 18 months from the date of the original purchase no such labor will be provide

Download Pdf Manuals

image

Related Search

Related Contents

EasyMoney User Manual  2-Pair Managed SHDSL Ethernet Extender User's Manual  Dicota BacPac Control  ÄKTA™ avant - GE Healthcare Life Sciences  manual de usuario  Samsung GT-S7550 Manuel de l'utilisateur(Extended Usage Guide)  MSC_Q7-TCTC-FD_User_Manual-V1.7  Descargar archivo  BoomBox User Manual IX.indd  ASUS FI6072 User's Manual  

Copyright © All rights reserved.
Failed to retrieve file