DHC Symbiote User Manual For JH/UE/Westone Guidelines:
Contents
1. DHC Symbiote User Manual For JH UE Westone The overmolded Symbiote is a high quality custom cable for IEMs with the 2 pin standard connector such as JH UE and Westone It is made from a flexible cryo treated finely stranded ultrapure OCC copper wire with polyethylene insulation If your IEM can fit those cables chances are it can fit the Symbiote The Symbiote provides clean and neutral sound with pinpoint accuracy but will not alter the sound signature of your IEMs Guidelines Once installed we do not recommend that you constantly plug and unplug the cable on IEMs like the UE where it is a tighter fit On Westones this is not an issue The Symbiote features overmolded plugs that are permanently installed to the cable but it is not indestructible The Symbiote s connectors fit firmly into the IEM for a fit that is intended to be long lasting so if it becomes necessary to remove the cable grip the connector firmly by its body and pull straight out Do not expose the cable to extreme heat or abrasive wear The PE jacket of the wire is very resistant to almost everything but it has its limits The cable is fitted with an unobtrusive piece of white silicone tube to act asa choker allowing the user to cinch the cable underneath their chin If you do not like the silicone tube simply cut it off carefully with scissors The cable at the IEM ends has been gently shaped with heat to stay in a U configuration It will be very complia2. nt and should stay put around your ear However even heat shaping is not necessary for most ears as the cable is very flexible we simply do it to make sure the cable fits everyone Memory wire is optional while it adds bulk it is a method to permanently hold the cable in a certain shape We find that heat shaping works just fine to keep the cable where it needs to be but we can fit the Symbiote with memory wire if you d like Installation Stock Cable Correct orie EM t unm skeci side of t facing Outward To fully seat the connect wigal iit left 12 amp right like seating a BUD A M a tut socket as you pushy it In firmly a Colored dot is on the right for UE as you hold the IEM with the eartip facing down On Westones just face the colored dot outward exactly as you do with the stock cable This cable follows the convention of the positive pin being on the side with the colored dot
Download Pdf Manuals
Related Search