user manual
Contents
1. provided The warranty is return to base and not a free in home service This means the customer is responsible for any inwards freight charge to return the product to an Edwards amp Co representative for warranty or service Our warranty excludes claims resulting from misuse abnormal use overloading general wear and tear child outgrowing the product not following instructions transportation damage including airline or freight damage poorly maintained product dropped goods negligence second hand product modified product colour fading over inflation mould damage to handle foam in use or fabric cuts and tears Our warranty also does not cover tyre punctures or corrsion to frames or fasteners as a result of atmospheric or environmental conditions Any replacement will not give the right for the warranty period to be extended Edwards amp Co does not cover warranty if the product has been purchased second hand or from an unauthorised reseller For the complete terms and conditions of our warranty please visit our website edwardsandcobaby com warranty Edwards amp Co e hello edwardsandcobaby com PO Box 35 445 800 ED AND CO Browns Bay Auckland 0753 0800 33 263 26 NEW ZEALAND 6 designed in NZ epwanss amp co edwardsandcobaby com2. HEN TAKING YOUR CHILD IN OUT OF STROLLER Make sure children are clear of any moving parts when adjusting the stroller otherwise they may be injured Care should be taken whilst folding and unfolding the stroller to prevent fingers being trapped This stroller is suitable for one child only Do not carry extra children or bags on this stroller Do not place heavy weights on the handle of the stroller as it will impact the stability of the frame The seat is suitable from birth up to 20kg The stroller is not intended to be a substitute baby cot or bed It is only designed to enable safe transportation of children Always take your child out of the pram when on stairs We do not recommend using the stroller when jogging Harness To avoid serious injury always use the safety harness when your child is in the stroller Always adjust the straps to suit the size of your child s body and to fit firmly A loose restraint or harness is DANGEROUS Never leave a harness connected when not fitted to a child in the stroller The harness can form loops which may be a strangulation hazard The buckle SHOULD ALWAYS be easily accessible It is important that your child can be released quickly in the event of an emergency designed in NZ 3 GENERAL WARNINGS cont Accessories Use the safety strap located on the handle at all times When installing the seat unit carry cot or capsule in the stroller ensure the parkin
3. Instruction manual Ed amp Co Oscar 3 Wheeler JN Keep for future reference To reduce the risk of serious injury or death read this owner s manual prior to using this stroller Suitable for infants up to 20 kg Independently safety certified to Australian and New Zealand standard AS NZS2088 EDWARSS amp CO designed in NZ Introduction Hey there Firstly thanks for choosing Edwards amp Co we re excited you ve chosen Oscar to discover the world with your littlie We have put a great deal of effort into ensuring that your stroller is safe and durable Please take the time to read this instruction manual carefully in order to get the most out of it from learning proper use and care tips Following these instructions will keep your child as safe as possible throughout a fun long lasting relationship with Oscar We d love it if you kept in touch You can sign up for our website newsletter or follow us on Facebook If you need anything we re a simple phone call or email away Enjoy Regards La Mark Edwards Warwick Edwards edwardsandcobaby com facebook com edwardsandcobaby designed in NZ GENERAL WARNINGS To greatly reduce the risk of injury or death please read this owner s manual before installing and using this stroller to ensure proper use Stroller NEVER LEAVE YOUR CHILD UNSUPERVISED IN THE STROLLER ALWAYS APPLY THE PARKING BRAKE WHEN YOU PARK THE STROLLER OR W
4. g brake is engaged at all times e Itis unsafe to use accessories other than those supplied by Edwards amp Co Do not inflate the tyres any more than 26 PSI Storage Keep away from fire and extreme heat Do not store in areas that may get particularly hot in summer like roof space or beside shed walls Edwards amp Co strollers are manufactured and tested to the highest durability and quality standards By following instructions as well as care tips your stroller will last for many years to come If in doubt please contact Edwards amp Co or your retailer designed in NZ 4 In this manual we will help vou with putting vour bub s new ride together Your Oscar 3 wheeler should come with the following Main components Stroller frame Seat unit 3 pneumatic tyres 1 front 2 back Bumper bar Bonus features Rain cover Sleeping bag boot cover Tyre hand pump designed in NZ eel installation and removal Rear wheels To install a wheel simply insert the rod on the wheel hole located on each wheel strut until vou hear a CLICKI To remove a wheel push down the metal lever as pictured below and pull the wheel outwards simultaneously designed in NZ Wheel installation and removal Front wheel To install the wheel insert the wheel rod into the frame hole as pictured until you hear a CLICK NOTE ensure the front wheel lock lever is disengaged beforehand so the wheel con
5. hable To clean the liner we recommend sponging with warm soapy water and a mild detergent A mild disinfectant may be used if desired NEVER tumble dry NEVER clean with abrasive ammonia based bleach based or spirit based cleaners If the wheels become damaged or worn discontinue use and replace Avoid sun exposure for long periods to prevent fading and damage to the fabric Avoid submersing the product in salt water If you do expose it to salt water ensure you wash the frame particularly moving parts in cold fresh water NEVER wring any fabrics Dry thoroughly before storage Store in a well ventilated area away from direct sunlight which could damage or fade your car seat e Store in a safe place when it is not being used Avoid placing heavy objects on top of it NEVER allow the seat to come into contact with corrosive substances such as battery acid or petroleum products Oscar was a legacy in our family and we hope his memory lives on with yours Please take great care of him and he will do the same for you 4 designed in NZ Warrantv informatio All Edwards amp Co products are guaranteed for two years from the date of purchase against defects in material and workmanship If we determine that the product has a manufacturing fault we will repair or replace it free of charge to you The decision to repair or replace is solely at the discretion of Edwards amp Co Proof of purchase must be
6. he bar into the bumper bar retaining bracket until you hear a CLICK To remove the bar press the release buttons located on the underside of the bumper bar retaining bracket as pictured below Seat leg rest and handle adjustment Seat recline To adjust the recline pull up the black plastic lever at the rear of the seat upwards and raise or lower the seat to the desired position lie flat reclined or seated Leg rest height To raise or lower the leg rest press the two buttons on both sides of the leg rest hinge as pictured below until you hear it CLICK into position Handle height To adjust the handle height press the two buttons on the inside of the handle hinge and raise or lower as pictured below designed in NZ l Securing and unlocking seat harness Securing harnes 1 Place your child in the seat Make sure that your child s back and bottom are flat against the seat This will maximise comfort and allow the harness to properly secure your child 2 Position the height of harness according to your child s height The harness straps should be level with their shoulders 3 To fit the harness link the two right hand fittings together and then CLICK into the buckle Do the same for the two left hand fittings Check that the buckle is secure by pulling the buckle There should be a strong connection Unlocking harness 1 To remove the harness press the large button on the front of the buckle until
7. it releases as pictured below Shoulder strap heig There are three height slot positions for the shoulder straps As your child grows you will need to move the straps according to your child s height IMPORTANT The shoulder straps should be positioned so that they sit level with your child s shoulders Do not use if the child s shoulders are above the highest slots in the backrest or if the child s weight exceeds 20kg designed in NZ ja rking brake and front wheel loc Parking braki To engage the brake push the red lever located on the right hand wheel strut downwards This brake locks both rear wheels To release the brake lift the lever upwards Front wheel lock The swivel lock is located at the top of the handle on the right hand side of the stroller To lock the swivel press the small button located on the outside of the lock and simultaneously lower the lever This locks the swivel and holds the wheel in a straight position To free the wheel raise the lever upwards until you hear a CLICK designed in NZ 3 Caring for vour stroller Important information We recommend storing your stroller indoors to avoid corrosion We recommend regular inspection and maintenance of locking devices and security of essential components e Regularly check all parts for wear and tear Lubricate if tight with a silicone based product Do not use spray petroleum lubricants such as CRC e The fabric is was
8. nects see page 1 To remove the wheel push the lever located at the top of the wheel and hold inwards towards the stroller as indicated by the arrow folding and folding the stroller Unfolding 1 Stand the stroller upright as pictured above left or on the ground with the handle facing upwards as pictured below 2 Lift the black clip as pictured above left located on the right hand side of the frame away from the catch clip and pull the handle of the stroller upwards 3 The stroller will unfold and CLICK into place Folding 1 Pull the two sliding levers as pictured above right just below the handle hinge on stroller frame then push the handle downwards towards the floor NOTE For compact folding fold the stroller with the seat unit removed or with the seat unit facing forwards The collapsed stroller should look as pictured below designed in NZ Seat unit installation and removal To install the seat unit insert the locking adaptors into the frame and push downwards do not press the release buttons when installing WARNING Ensure the seat unit is locked into the stroller frame before use To remove the seat unit press the two release buttons at the same time and lift upwards as pictured above NOTE Seat unit can be installed in a front or rear facing position designed in NZ ki Bumper bar installation and removal To install the bumper bar insert the rods on each end of t
Download Pdf Manuals
Related Search