Home

manual

1. uincat Installation Operating and Servicing Instructions silverlink 600 Electric Range Oven ESLR9C Please make a note of your product details for future use Date Purchased Model Number Serial Number Dealer SILVERLINK GOO IS 293 ECN 3607 Page 1 of 7 CONTENTS Important Information Warnings and Precautions Technical Data Checklist of Enclosures Installation and Commissioning Operating Instructions Cleaning servicing Maintenance and Component Replacement Fault Finding Spare Parts List service Information and Guarantee NO OD OD O1W WW W N Ol IMPORTANT INFORMATION Read these instructions carefully before using this product paying particular attention to all sections that carry warning symbols caution symbols and notices Ensure that these are understood at all times WARNING This symbol is used whenever there is a risk of personal injury CAUTION This symbol is used whenever there is a risk of damaging your Lincat product ROTE NOTE This symbol is used to provide additional information hints and tips Gok p KEEP THIS MANUAL FOR FUTURE REFERENCE IS 293 ECN 3607 Page 2 of 7 WARNINGS AND PRECAUTIONS _ This appliance must be installed commissioned and serviced by a qualified person i in accordance with national and local regulations in force in the country of installation lf the supply cord is damaged it must be replaced by the manufacturer its service age
2. Type number All available on serial plate Serial number Lincat reserve the right to carry out any work under warranty given reasonable access to the appliance during normal working hours Monday to Friday 08 30 to 17 00 GUARANTEE This unit carries a comprehensive UK mainland 2 year warranty The guarantee is in addition to and does not diminish your statutory or legal rights The guarantee does not cover e Accidental damage misuse or use not in accordance with the manufacturer s instructions e Consumable items such as filters glass bulbs slot toaster elements and door seals e Damage due to incorrect installation modification unauthorised service work or damage due to scale food debris build up etc The manufacturer disclaims any liability for incidental or consequential damages Attendance is based on reasonable access to the appliance to allow the authorised technician to carry out the warranty work Service calls to equipment under warranty will be carried out in accordance with the conditions of sale Unless otherwise specified a maximum of 15 minutes of administrative time not spent directly carrying out servicing work is provided for within the warranty Any requirement for staff attending the call to spend greater time than 15 minutes due to administrative requirements such as on health and safety risk assessments will be chargeable at the prevailing rate IS 293 ECN 3607 Page 7 of 7
3. of non combustible material Minimum distances A 100mm B 1500mm see Fig 1 Fig 1 Position this appliance under an extraction canopy IS 293 ECN 3607 Page 4 of 7 Power Ratings a Oven ee Oven Front hotplates Rear hotplates _ _ Rear hotplates 3x 1 5 oo OS Total Rating 3N E 16 5kW__ L127 L227 L315 OPERATING INSTRUCTIONS Only qualified or trained personnel should use this appliance i Before first use burn off the protective coating on the hotplates by heating them on J maximum for 3 5 minutes without a pan Hob operation Switch on the mains supply the green neon will illuminate Turn the relevant control knob to the required setting Each plate incorporates a protection device that automatically reduces the power when the pan is removed or if a pan boils dry Oven operation Switch on the mains supply the green neon will illuminate Set the oven control knob LH side to the desired temperature the amber neon will illuminate The amber neon will extinguish when the set temperature is reached and then operate as the element cycles Allow 20 minutes from cold for the oven to heat and stabilise This appliance has had the airflow optimised for the most even cooking on the second and fourth shelf positions using either 2 x 1 1 gastronorm containers or 4 x Y2 gastronorm containers Safety thermostat This appliance is fitted with a safety thermostat to protect the oven from ov
4. erheating If the oven is not heating try resetting the safety thermostat by pressing the red button located above the cable inlet on the rear panel The oven must be cool before the reset can be activated IS 293 ECN 3607 Page 5 of 7 CLEANING Do not use a water jet or steam cleaner and do not immerse this appliance Clean all panels with warm water and mild detergent do not use abrasive materials Dry with a soft cloth The oven is fitted with a removable liner base to assist cleaning SERVICING MAINTENANCE AND COMPONENT REPLACEMENT Other than resetting the safety thermostat all servicing maintenance and component replacement on this appliance should be carried out by one of our recommended service engineers FAULT FINDING Please refer to the Service Help Desk number on the final page of this manual SPARE PARTS LIST Hob control knob swi4 6 position switch IS 293 ECN 3607 Page 6 of 7 SERVICE INFORMATION For help with the installation maintenance and use of your Lincat equipment please contact our service department UK 01522 875520 For non UK customers please contact your local Lincat dealer All service work other than routine cleaning should be carried out by one of our authorised service agents We cannot accept responsibility for work carried out by other persons To ensure your service enquiry is handled as efficiently as possible please tell us Brief details of the problem Product code
5. nt or similarly qualified person Ensure that the plug socket is accessible at all times Strip plastic coating and clean the appliance before use During operation parts may become hot avoid accidental contact Disconnect this appliance before servicing maintenance or cleaning TECHNICAL DATA Model Height mm Width mm Depth mm Weight kg ESLROC 925 900 670 950 Hob cooking surface mm W900 x D600 Oven capacity mm H410 x W670 x D340 Shelf size mm W670 x D340 CHECK LIST OF ENCLOSURES Warranty card Instructions manual Wire shelves Enamelled oven base panel INSTALLATION AND COMMISSIONING This appliance must be earthed An equipotential bonding terminal is provided to allow cross bonding with other equipment If replacing the plug connect the terminals as follows IS 293 ECN 3607 Page 3 of 7 Green and Yellow wire Earth E Blue wire Neutral N Brown wire Live L Means of isolation with at least 3mm contact separation in all poles must be incorporated into the fixed wiring of this appliance The fixed wiring insulation must be protected by insulated sleeving having a temperature rating of 60 Deg C Supply cords shall be oil resistant sheathed flexible cable not lighter than ordinary polychloroprene or equivalent elastomer sheathed cord code 60245 IEC 57 Install this appliance on a level surface ensuring all vents are unobstructed Any partitions walls or furniture must be

manual

Contents

Download Pdf Manuals

Related Search

Related Contents