MH3E-E-A1
Contents
1. H3 series IP camera user manuel MH3E E AI C EasyN Foreword This series product is specific on network video surveillance including wired box ip camera wireless box ip camera wired dome ip camera wired IR waterproof ip camera etc It uses processor with high performance chips to realize audio video capture compression transmission and the standard Motion JPEG coding algorithm can confirm the clear fluent effect of video transmission It supports user to view real time video and remote control via browser such as IE super client software and APP platform The series IP camera is available to enterprises chain store factory home and any place need to monitor and view through internet It is easy to install and user friendly operate Please check if the accessories are all in before installation If there is any missing please contact seller timely List of items IP camera eee 1 pe Bracket refer to model 1 pe Power adapter 1 pe Certificate 1 pe Warranty Card ee I pe Instruction IP Camera it is network camera PC it is computer singleclick left click of mouse double click double left click of mouse IP Camera default administrator user name admin password admin Default LAN local area network IP address 192 168 1 126 port 81 Statement The device s ver2. etc Operation log record user operations Alarm log record device alarm information 2 11 1 Log Retention Time Step 1 click Config then Other Settings Step 2 select retention time for log it supports 1 2 3 or 6 months then click Save button 2 11 2 Inquire Log Step 1 select log type and sub log type Step 2 select device for inquire log default 1s All Devices Step 3 select start time and end time then click Search 2 11 3 Log Backup Step 1 select log type and sub log type Step 2 select device to inquire default is All Devices Step 3 select start time and end time then click Search Step 4 click Export then select backup path Note 1 It should search log before backup 2 Exported log is with Excel format 3 Each Excel table only saves 5000 pieces of logs extras will be saved as another Excel table and so on 36 MH3E E A1 07 EasyN 6 14 Other settings 00 00 00 Sr Bee Mere ane One Month Capture format fete Md Image capture path BD Multi screen one computer host can support three monitors at the same time Time verify I tick and configure time software verify time to all devices at appointed time to match time on PC Snapshot format format of snapshot support JPG and BMP Snapshot save path the save path of snapshot Save click Save button to enable configuration Exchange User click Logout after that click on oth
3. 2 pins 1 2 short circuit 4 Network connection bg ADSL modem Inner IP 192 168 0 1 IDuter IP 202 96 85 58 og 192 168 0 100 PC 2 Office Offices Factory Home or shop Picture 3 network connection guide 4 1 Connection instruction Connect camera to router and connect power adapter before accessing IP Camera and check the network light and power light if it is normal confirm the cable status is good To connection mode in picture 3 1 camera l and camera 2 separately connect to two different LANS 2 the two LANS must directly connect to internet and there is router in the LAN the connection mode can be ADSL or optical fiber etc 3 computer 3 can access internet 4 2 Access instruction For accessing camera it should configure some simple settings on the cable in good status 1 computer and camera should be in the same subnet To access camera via inner access link ip link it should confirm the _6 MH3E E A1 gt EasyN computer to be in the same subnet with the camera otherwise it needs to configure the IP for IP Camera for example camera l in pictured has IP 192 168 1 126 Gt is in subnet 192 168 1 PC 1 s IP is 192 168 0 100 it is in subnet 192 168 0 then PC 1 can not access Camera l through inner link so we should change Camera 1 s IP into 192 168 0 126 2 computer and camera are in different LAN but both can access internet
4. Refer to picutre3 camera l and computer 2 if we want to access camera l through computer 2 then need to configure some settings following 1 to confirm computer l can access camera l then configure router l do port forwarding in router l1 to transfer the computer 2 s access apply to go through router l then to camera l Normally computer 2 only can reach router l without port forwarding for camera l 4 3 Connect network via ADSL PC ADSL modem IP camera ADSL Settings set Retresh KG Connect camera to router through cable S Configure parameters via IP Camera tool refer to 5 1 IPcamera tool KG Login device by administrator access PPPOE settings page to input user and password After information input click Set by enabling DDNS service meanwhile to restart device refer to 5 6 DDNS configuration Connect to internet via ADSL then we can access camera by domain name link through internet Ta MH3E E A1 07 EasyN 4 4 Access network through router In picture 3 camera l and computer l are in different subnets run Devfind exe in 1 Connect device to LAN via cable 2 Configure device s parameters refer to 5 1 IPcamera tool 3 Access device with administrator 4 Access ddns settings page to enable DDNS service then click Set to restart device Refer to 5 6 DDNS configuration 5 Access with ddns link through internet
5. so this item provides function of port mapping from LAN port T Support Internal Port si to WA More Items show in every single page3 oo d 1 Y TotallPages ID Description Internal Host IP Address Protocol External Port Internal Port Del 1 ipcamera 192 168 1 104 TCP 104 104 Note for more cameras accessing internet we need to do port forwarding for each camera and we should set different ip and port to each camera to avoid confusion If the port is not 80 and for inner local area network access the link format should be IP address added colon and port for example http 219 134 170 92 81 8 Appendix 8 1 Common issue Forgot account Press reset button on the bottom of device on powered condition about 10 seconds to reset to factory settings Default administrator user admin Default password admin The image is white Please adjust video parameters for camera mode brightness contrast saturation etc Resolution 640 480 Mode 50 HZ Brightness 6 gt Contrast 1 If the background light is too strong please adjust the range to view The camera finder can not find device Please check if the camera and computer are in the same subnet And if the cable or power adapter is not good it will cause the problem too Normally the power light yellow is always on the network light flickering green is always 38 MH3E E AI gt EasyN If it is the f
6. CD click search then select searched IP Camera to modify the parameters refer to picture 4 JE IF Camera Finder oka Current Computer Equipment Information Network Card Realtek PCIe FE Family C General Others IF 192 168 2 59 Sub Mask 255 255 255 0 Name IPCAM gateway 192 168 2 254 HTTP Port l click here to update network parameters to camera Primary DNS 5 5 4 4 Secondary DNS IP 192 168 2 227 Sub Mask 255 255 255 0 Equipments Gateway 197 168 2 254 Made Mame IP Custom Auto F IPCAM 192 168 2 215 F 197 168 2 276 Primary DNS 192 166 1 1 192 Fo caMo o ee SAUE EE ein Secondary DNS o 0 0 0 Inner access http ioe 168 2 227 61 Open Outer access Check Open Count 3 Export EasyN Picture 4 LAN configuration interface Note the default parameters of camera IP 192 168 1 126 port 81 Details Please notice left up side interface the current parameters of computer it shows the basic network parameters of computer l if the computer has more than one network adapters please select the right adapter the camera l working on 8 MH3E E AI amp EasyN IP address input IP address the IP must be in the same subnet with computer Mask default mask 255 255 255 0 Gateway confirm the gateway to be the same one for camera and computer DNS DNS server IP address Port the HTTP service port of device default is 8l User and password default account is
7. Close Automatic port mapping UPnP Enable Close Ok Refresh Picture 13 DDNS configuration Note 1 the ddns function is realized by transferring method when access device through domain name link it will automatically change into device s IP and port Note 2 if the device can be accessed by IP address but not domain name link please verify the DNS configuration if it is available and confirm the DNS is the same with LAN settings Third party DDNS configuration The product also can support third party DDNS such as Oray Note the third party DDNS realizes the function by analytical methods after inputting the ddns in browser the characters would not change if the port is not 80 need to add a colon and port behind the ddns such as http easyn 3322 org 81 13 MH3E E A1 07 EasyN 5 6 E mail service configuration IP Camera Options TE E mail input email smtp server Advanced Settings SG User Manage SMTP server femtp 163 com Port 25 ss Capture time E mail verification Open Close Alarm Server Username leasyn 4 KC input account name of email sender PTZ Setting Alarm Settings Password sosse _ input password Video amp Audio Settings Send to easyn 163 cam E mail address 1 E mail address 2 E mail address 3 Sender address leasyn 163 com 4 input sender email Theme Information a p You can enter 127 characters click to enab
8. admin authority administrator enable to manage device manage user view video playback video configure map inquire log and exchange user and exit software user authority enable to view video playback video configure map inquire log exchange user and modify password guest authority enable to view video exchange user and modify password Users Permissions admin admin USEF E guest guest 2 10 1 Add User Step 1 login with admin then click Config then User Management Step 2 click Add button input name and password then select permission 35 MH3E E AI gt EasyN Step 3 click Save button to finish 2 10 2 Delete User Step 1 login with admin then click Config then User Management Step 2 select user then click Delete button 2 10 3 Modify User Authority Step 1 login with admin then click Config then User Management Step 2 select user then click Modify Step 3 select permission then click Save 2 10 4 Modify User Password Step 1 click Config then User Management Step 2 select user then click Modify Step 3 input new password then click Save 6 13 Log Log Type All logs 7 Sub log type All Device 7 ue 2011 09 27 00 00 00 sising 2011 09 27 Tj 23 99 99 Log Type All logs record all information of system System log record information of user login logout and user configuration
9. search button then select device in search list to add click button to add device to area Add device manually NES button then pop up add device dialog as below Name Device name support custom length less than 30 byte Only display name instead of IP after input name Channel Support different channel on case that one device has many channels presently device only supports one channel IP or Domain name Device IP or domain name Port Device http port default is 80 User name Device login name default is admin Password Device login password default is admin Area Device displaying area After input all needed information click OK button to finish ADD 2 3 2 Group management Add group Click button input group name into pop up dialog then click OK Notice support 20 groups MH3E E AI 07 EasyN Configure group EasyN IP Camera e O FR H 0 Device Management Eu 1 Window number 1 i 11 Window number 1 E 111 Window number 1 Group Management Parameter settings Record Management Linkage Alarm User Management Other Settings Channel A m D lt Vv VERSION 2 0 0 5 After add groups configure groups Configuration select group click in front of device IP or name then select Channel 01 click sk button to add device channel to group Notice single group can support 16 picture view Ma device channel to the group lt lt Re
10. view to set cycle time click Config then Record Management to configure cycle time default value is 5 seconds 6 7 PTZ control 1 PTZ control We can move PTZ to 8 directions through controlling direction buttons and drag the slider to change PTZ moving speed is for slowing is for accelerating 93 MH3E E A1 07 EasyN e Enlarge aperture need device hardware support a Narrow aperture need device hardware support Te Enlarge focus need device hardware support B Narrow focus need device hardware support El Focus forward adjustment need device hardware support EJ Focus back adjustment need device hardware support ut Light button click to light on off need device support woer Wiper button click to wiper on off need device support 2 5 2 Preset position configuration Client software supports 256 preset positions for actual amount of preset positions it depends on camera supported PRESET PresetName 008 PresetO08 Preset009 Preset010 Goto 24 MH3E E Al 07 EasyN Set preset position I Select window to set preset position then select preset position number click Set button Goto preset position Select window to call preset position then select preset position number click Goto button Del preset position Select window to delete preset position then select preset position number click Del button 1 Image color confi
11. Explore thus it make more easy to manage and maintain devices to remotely configure start and upgrade firmware etc Please check if the items are all in before installation of IP camera if there is some missing please contact seller 2 Features powerful high speed video protocol processor high sensitive and high definition CMOS sensor 0 3 megapixels resolution IR night vision Optimized Motion JPEG video compression algorithm realize to transmit high definition image through narrow bandwidth multiuser management and password support browser IE browser Firefox browser Google browser etc support wireless network WiFi 802 11 b g support dynamic DNS DDNS a MH3E E AI support max size 32G SD card snapshot and record on alarm motion detection support two way audio support mobile phone view log e OG image snapshot support network protocols HTTP TCP IP UDP STMP DDNS SNTP DHCP FTP Three level account password and user authority security management Built in unique lifelong free DDNS no need Oray Built in ddns no worry about frequent offline and good speed free Such as http demo ipcam hk the series number s demo Mobile phone No need to install software IE multi view and System feature platform free Support computer monitoring support most smart Superiority phone such as Iphone android Symbian Mobile phone Support Iphone Windows Mobile S
12. Manual Record of Ares Stop Manual Record of Area Main Steam All Sub Stream Al Auto Adjust All Full Display All Check Time Al fk kr DP Connected All connect device in selected area Disconnected All disconnect device in selected area Arm All devices in selected area arm Disarm All devices in selected area disarm Start Manual Record of Area enable manual record in selected area Stop Manual Record of Area disable manual record in selected area Main Stream All connect device with main stream in selected area Sub Stream All connect device with sub stream in selected area If device is in connection it should be disconnected then reconnect then the stream changes to sub stream otherwise it is still in main stream Auto Adjust All device in selected area auto adjusts view proportion Full Display All device in selected area adjusts image proportion according to the size of window of multi picture view Check Time All device in selected area synchronize time with PC Notice Please double click Channel 01 below device or drag Channel 01 to window to view video Select one device right click on Channel pop up dialog as 22 192 168 2 104 104 F Cha 192 166 2 connect eer Start Manual Record 192 168 2 Mary Vain Steam 192 168 2 7 Sub Stream 192 168 2 HF Current Screen amp 1 197 168 M Auto Adjust Check tme 22 MH3E E A1 gt EasyN Connect I connec
13. N SE SAN H N NE 15 NNN 16 6 5 Device management rssrnnrnnvrnevnuvnnvrnevnnvnnvrnernnennvrsevnnennvrsennsennennennsennerneensennenseensenneen 18 JE JE 50 GO EE 21 GT Le 23 6 8 Video NL 25 SPRE PIG DOCK MEN 29 eld OC Gi Oi NaP RE EE EEEE keee 31 6 12 User management ressernuennernevnnvnnvvnevnnvnnvrnevnnennvvnevnnennvrsevnnennvnnennsennvnseensennevsenneenneen 35 EE ER EE 36 6 14 Other settings ue urmmmremsesrsesesveerevkerrernevnarseenevnevnennsvsernskeenesnevbevneenesnernenndenen 37 PENN eeepc EEEE EEEE arco ted sere eco ch de SONESSON NERE 37 CAPPE 0 01D eee ee a Ree eee ee E en Re ean E em en PS Near anne Rory E on nt nN Ene Tre 38 Be CO 000 01 0000 STE Ne RSS 38 EE Warr niy Lg GT AG EEE eee ne 39 8 3 EO ERE 40 oD MH3E E AI gt EasyN I Product Overview IP Camera is designed as web server running on network it can transmit real time video to anywhere through internet and user can view real time live video via web browser any time It is available to large stores schools factories houses etc Basic function IPCAM can transmit real time live video data to remote place through internet with hardware compression method MJPE which providing high quality video image and 25fps frame rate on LAN WAN local area network wide area network The IPCAM video data transmission is basic on TCP IP protocol built in web server supporting Internet
14. and for 264 format only can play with factory player Cover disk after fulfill Tick to enable deleting the most former record when all disks space are less than selected recovery space If no tick recording stops when all spaces are less then selected recovery space Disk Total size G Available si Co MediaRecordi Do MediaRecord E MediaRecordi Record Save Path Software auto detects and lists on tablet after set up The default path is D Note Software can support 20 pieces of disk partitions 1 Alarm Record Alarm Type Motion Detection Alarm on motion detection Input Alarm Alarm on external input signal Lost Connect Alarm on lost connection 97a MH3E E A1 G EasyN Hard Disk Full Alarm on hard disk is full Hard Disk Error Alarm on hard disk error Linkage Alarm Linkage Alarm E Popup Video Window fl Electron Map Alarm fl Linkage Record E Sound Alarm Popup Video Window Tick for popping up windows on alarm Electron Map Alarm Tick for flashing on electron map on alarm Linkage Record Tick for recording to local disk on alarm Sound Alarm Tick for displaying sound on alarm General Record Length 5 1 60rmin Alarm Duration clin 5 605er 1 Switch epee 5 605ec Pre recorded alarm Lenot o Alarm Duration Time Alarm duration time default is 10 seconds selecting range is 5 60 seconds Pre recorded alarm Length Pre recording s length on alarm
15. button for snapshot BeBe ntarce button press this button then select area for enlarging on windows lt gt Fm screen button press this button for full screen show double click on single windows for one windows full screen Normal lp rop down options for selecting playing speed default is normal Bibs ound button click to sound on off default is closed Input time point then click ES to go to selected time to start playing Record search 29 MH3E E A1 07 EasyN All Record 7 2011 09 SUN MON TUE WED THU FRI SAT Step 1 define file type and searching time Step 2 select windows to playback then select device channel on list tree Step 3 if there is record file matching to searching condition the file should display on timeline forum then double click on channel to playback e d Et 00 00 02 00 04 00 06 00 08 00 10 00 12 00 14 00 16 00 18 00 20 00 1 Hj 2 iBS 3 HE 4 Schedule record Hill alarm record Ml Note move the mouse on timeline it will display time point of current position click to view the video right click on timeline the display length should turn into 2 hour from 24 hour it means the time point extending 2 Searching file Playback manually record EEE Manual Step 1 select file type and device channel Step 2 select searching time then click Search the eligible files should list on device tree Step 3 select playback windows then double click record f
16. ce Logout only admin authority can logout user and guest authority can not It needs to input administrator user and password when logout 6 4 Software interface ircAMERA EE BA amp ngm EDL Software interface includes six blocks I system button list 2 label list 3 devices list 4 real time preview 5 PTZ control 6 alarm info list system button list Eahelp button click to open client use manual Ef hidden button click to hide software to system hidden list ES exit button click to pop up logout dialog label list 16 MH3E E A1 LOGO information 4 Click to change to preview interface Click to change to playback interface Click to change to map operating interface Click to change to configuration interface Click to change to log operating interface Logout or change user Click to logout Devices list List mode display area settings and channel from user set Group mode display group and channel from user set Current screen display devices current screen connected only available on List mode Real time preview a electronic enlarging button circle an area after click to enable BAMaudio talk button select the right window then click button to enable only support unique device to talk at one time bi Listen button click to enable disable listen support multi listen t Record button select the right window click to enable disable recording I IJSnapshot button
17. ce support Infrared night vision support auto switch manually switch Default is auto need device support Note it can not configure if device does not support that function 2 Video stream Type Resolution Frequency meet dd fr Frame Rate fos I Frame Spaced DO 1 300 Rate Control fies 7 Rate Quality Stream Type support main stream and second stream Resolution different resolution for different model Frequency support 50Hz and 60Hz default is 50Hz Bit Rate different bit rate for different model Frame Spaced N standard or 60Hz device has range 1 30fps P standard or 50Hz device has range 1 25fps I Frame Spaced the interval of two I frame of image Rate Control support VBR and CBR Rate Quality support 6 levels lower level with better quality i Audio 239 MH3E E AI stream Type Beng Strear Audio Capture ag 7 Audio Type fl 7 Input Mode Stream Type support main stream and second stream Audio Capture ON or OFF Audio Type G727 G711 and AMR Input Mode MIC or Line In ii OSD Camera Name E Time OSD OSD Name aa Camera Name tick to enable adding name on image Time OSD tick to enable adding time on image OSD Name input OSD name then click Apply button it can support 18 bit iii Network IP Address Sub Met Gateway Mac Address BER ee dg OMS Manual Primary ONS Second ONS Http Port To configure network paramete
18. default is 5 seconds selecting range is 1 15 seconds Arm and Disarm Arm Press Preview select area or device for arming after arming it will display M logo in front of device IP or name Disarm After disarm logo M disappears Note 1 Linkage alarm only is available on arm condition if device disarms linkage alarm is not available 2 If new alarm happens on alarm the alarming time should extend 3 Motion detection and input alarm can linkage popup video window electron map alarm linkage record and sound alarm others only support sound alarm 1 Manually Record Select monitoring windows click button or right click on windows to 28 MH3E E A1 gt EasyN select to record for recording time and path referring to schedule record Record priority 1 If enable schedule record and alarm record at the same time it triggers alarm in schedule alarm system should stop schedule alarm and runs alarm linkage record 2 If enable schedule record and alarm record at the same time then enable manually recording when alarm linkage record happens system should stop schedule record and alarm record and run manually recording 6 9 Playback 1 Playback by searching time Bry button press this button for playing record pause button press this button for pause HDM single frame play press this button for single frame play one click one frame picture BR napshot button select windows then press this
19. er page to re login 7 Port forwarding Referring to picture 3 computer l can access camera l for computer in internet such as computer 2 computer 3 to access camera l it needs to expose the camera l in internet the method is to do port forwarding in router l to enable it accesses internet Access router setting interface through computer l for different router it has different setting interface Therefore the way to do port forwarding may be some different please refer to the manual of the router To most routers we can find virtual server or forwarding rules page input the camera l s LAN IP address and port then enable it For example as below picture 37 MH3E E AI NW725 Plus g Convenient Setup g System Information System Log I Internet Setup O Wireless Management I Security Setup O Access Control O LAN Setup Applications amp Game a Application Gateway O DDNS I Routing g System Management FTP Private Port Status Enable Disable Port Number 21 Description ipcamear Internal Host IP Address 192 168 1 126 Protocol External Port 81 81 Virtual Setting Version V1 2 09 This item provides configuration items and related templates about optimize games and applications including Virtual server DMZ and UPNP Some games servers and applications such as BT QQ video Edunkey web server are no longer effect when working behind an NAT router
20. eturn with device murere te Client agency User name User address Contact TEL mobile phone maintain time Problem details result note 40 MH3E E AI
21. guration Click Color button to access image color adjustment dialog COLOR aus image brightness or image white balance opm image contract i image color Eik ccover to factory set color 6 8 Video management 1 Plan of record 25 MH3E E A1 REPT Sls e shauetobisennecrrets Click Config then Record Management then tick Enable the plan of record picture as above enable plan record Select channel to record then left click to drag out a green box the box range is the time to record Click Save to finish disable plan record Untick Enable the plan of record then click Save Or cancel the green box then click Save Left click on green box then drag mouse to cancel Notice if to set same plan to all devices click Copy then Save after set up one device then all devices enabling plan General Record Length Single record file s size the factory set is 5 min size single record file s size can be 1 60 minutes To modify size in General Record Length blank then click Save General Record Length Bo 1 60rmin Alarm Duration clin Nitch Interv js E Pre recorded alarm Le o 1 155ec Recovery of remaining disk The selecting range is 1 10G when space is less than selected range it should save record to another disk or cover the former records 26 MH3E E AI gt EasyN Record format It can support 264 and AVI formats
22. ile to view video it can support one video displaying on four windows at the same time 30 MH3E E A1 G EasyN 6 10 Electron map 1 add map CANCEL Step 1 click Add Map or right click to select Add a new map Step 2 input map name in dialog Map Name then load map Step 3 click OK to add map to software 2 Edit Map After added map then go to edit map Step 1 click Edit Map on map or right click to select edit map Step 2 drag device channel to map then it displays i double click on it to view image Step 3 after edit click Stop Editing It needs to enable Electron alarm map of alarm linkage for logo flashing 3 Delete Map Select map name then click Delete Map to cancel map 6 11 Parameters configuration To connect device for configuration on parameters configuration page double click device channel the image should display on right side image frame I Color W Fin 1 Mirror Scene Infrared oto 31 MH3E E AI G EasyN Brightness drag slider to select best brightness Saturation drag slider to select best saturation Contrast drag slider to select best contrast Hue drag slider to select best color Default click to load default value Flip tick for image turnover need device support Mirror tick for mirror image need device support Scene I white balance support auto indoor outdoor Default is auto need devi
23. irewall limiting the access of camera finder VV The remote access does not work 1 If device works on LAN If it can then confirm the ddns if it is correct 2 To check port forwarding in router if it is correct 3 Does the network provided by ISP network runner can support to set up virtual server 8 2 Warranty instruction a b c d e Warranty for one year dues to this warranty card not include man made damage Late for warranty time need to pay fee for service If damage is caused by non correct use or other reason not included in warranty it can enjoy free repairing on warranty card except component fee Send product with warranty card to manufacturer or seller when searching for repairing Open shell and tear sealing label is not in warranty It would not accept damaged device caused by transform or extra adding Below cases are not in warranty a b C d The periodic inspection maintenance repair or replacement parts caused by normal wear and tear Damage caused by fall extrusion artificial flooding moisture and other man made caused damage Damage caused by flood fire lighting and other natural disasters or force majeure factors Device ever repaired by non authority List above refers to relevant provision if there is some change 39 MH3E E A1 Please cut along the dotted line G EasyN 8 3 Warranty card Please cut the below form for information and r
24. le settings of Refresh Picture 14 email service configuration The information in picture 14 is must if some options are not correct the settings would not work Note it is best test the settings in Outlook Express before configuration to confirm the settings working SMTP input e mail SMTP server Sender address e mail address to send mail Receiver address e mail address to receive snapshot and IP address It can support 4 receivers 6 Central Management 6 1 Installation I Requirement Hardware condition Pentium IV series CPU frequency above 2 OG memory above 2G hard disk gt 120G monitor 1024X768 or above ODD FR Software condition 14 MH3E E A1 07 EasyN Windows2000 WindowsXP Windows2003 Windows Vista Windows 7 recommendation Windows XP 6 2 Installation steps Double click installation package it pops up as below IF Camera InstallShield Hacke xj Welcome to the InstallShield Wizard for IP Camera The InstallShield Wizard wall install IP Camera on your computer To continue click Next Cancel Select path then click next After installation it creates an icon on desktop as below ia EasyN Client At program list as below rm IF Camera a IP Camera a Player EN Uninstall 6 3 Login and Logout 15 MH3E E A1 Login the default user is admin and no password click ok to access software main interfa
25. move the device channel from the group ups Adjust the order to display devices in the group selected device exchanges position with the front device down Adjust the order to display devices in the group selected device exchanges position with the next device Edit Group Modify the group name and numbers of multipicture clear group after modifying need to create new group Delete Group Delete group and devices in the group 20 MH3E E A1 gt EasyN 6 6 Image preview After device configuration click Preview button to access main interface devices list displays as list tree click group or list to exchange information of group or list Default viewing screen is 4 picutre max support 16 picutre view IP Camera Client 2 0 0 5 EasyN IP Camera eo Og A 1 3 NN EEE Source I Non cycle preview IP Camera Client 2 0 0 5 EasyN IP Camera NT Has m oe A green 4 LE LE LU venne I I Click in front of device s name or IP then double click Channel 01 or drag Channel 01 to the window to view video It displays a blue triangle amp l after device connected Channel 01 if the display as it means device does not connect And if the display asi it means there is alarming _2 MH3E E AI 07 EasyN Right click on one area it pops up dialog as Conmected All Disconnect All Arm All Disarm Al Start
26. mp Audio Settings if you have a wireless router select the routing mode lusketunnug Security Type Mo ok Refresh Picture 12 wifi configuration 5 5 DDNS configuration In picture 3 router l obtain wide area network IP address through ADSL the IP address is dynamic we could not know the real time IP address of the device from internet therefore we need to obtain the address through DDNS server in internet camera l will send message to the DDNS server for each defined interval time the DDNS server analyze the IP address of router l it connected then we can obtain the IP address from DDNS server Therefore the domain name stands for the dynamic IP address if the device can not be found by IP address the domain name is not available Manufacture DDNS settings The manufacture has set up DDNS server in internet and distributed domain name for each device the domain name has build in device as picture 13 Input the domain name link to browsers the link will change into the real IP address of the device and start to connect device 12 MH3E E Al G EasyN IP Camera Options System Settings Remote Access Networking Networking Dynamic DNS Wireless Settings amp Enable Close Remote Access Settings Server Address user easyn hk Alarm Settings Server part ana video amp Audio Settings Username kalt baketu Password eescee Other dynamic domain name C Enable
27. rs on current condition the software only displays network parameters of current device despite it is manually configured or DHCP iv Motion Detection io MH3E E A1 Configure motion detection Step 1 tick area then it display a green dialog on left image Step 2 drag the green dialog to position wanted and configure its size Step 3 configure sensitivity of alarm area detection Sensitivity range 0 75 default is 35 the greater the value the more sensitive and vice versa Step 4 click Linkage Alarm to select alarm type Linkage Alarm has E Popup Video Window Wf Electron Map Alarm fl Linkage Record E Sound Alarm Step 5 enable arm function for device otherwise it can not support alarm linkage v PTZ Protocol For ptz control it should be fulfill with right parameters different ptz has 34 MH3E E A1 gt EasyN different protocol protocol code and baud rate vi System on E After select time click Set Time to modify time of device Sync with computer time tick then click Set Time to enable Reboot click to reboot Restore click to restore factory settings after restore need to reboot to reconfigure network parameters of device for reconnection 6 12 User management Factory set administrator name is admin no password Login with administrator then add delete and configure user authority User authority includes three levels admin user and guest
28. select the right widow click button to snapshoot support to snapshoot twice in one second 17 MH3E E A1 EasyN SD card button select window click button to open SD card page to see nan information HH Multi picture button click to enable multi picture view EJ Fullscreen button click to full screen view of real time area view Ker ront group button click to show the front group view on circleview mode Ed Next group button click to show the next group view on circle view mode LEEW Circle view button single click to enable disable i list fold unfold button click to fold unfold EJ Alarm information list fold unfold button click to fold unfold 2 3 DEVICE MANAGEMENT 2 3 1 Add device Firstly click Config button on label list to access device management page 6 5 Device management 1 Add device Firstly click Config button on label list to access device management page Add list At first time run the default list is null click Add Area button pop up Add Area dialog and input a name on name blank to add an area into device list That is the first area so there is no belonging area of it it means the belonging area is null Notice it can support 128 areas presently ILDEMESIC1ick to pop up configuration dialog sacd elete selected device rn er searched device into selected area Liselect All select all devices in list Add device Search and add device in LAN Click
29. sion in the manual may be different from the current device s version if the installation can not finish referring to the manual please contact seller The manufacture preserves authority of content update from time to time _ MH3E E A1 gt EasyN EO yO EE l NNN 3 NN NNN 5 3 1 Device Pee 5 DN 5 Network COnnGCU Oieee esini eren seirene En EAEE EESE EEEE adie EEEE TAES ENE EEEE E EAEE SE 6 AE Ne 6 4 2 ACCESS INStlUCtlOl a seeeeererssrereeererrrreerrrrrsrrrrrrrrrrrrrrrrrrr rss rer rr rss ss rr RR rr rss RR RR rr rss rss rr rr rerna nn 6 A 5 CONNEC network Vid ADS ieicsticsaiwsnnteaductesetgsiroainsdesiatdids aN EENE ESEN RNENSE VANES NANESE ANERER 7 4 4 Access network through LOUTtTCL ssssseesserssrrrsrrerrererrrerrrrerrerrrrrrr rer rer rr rss rrsr res res 220 rosa 8 5 SOM Ware OPEFALNG eerren eE EEEE e Ein erise 8 JE 0 EEE EE EE 8 5 LOOV O ee ee 9 JE 050 Mk SEEREN 10 5 4 Basic network confi ouran sessie eE EENE EEE ENEA 11 5 5 DDNS configuration rrrnnnnnnnrnnrornrrnnnvrrvrnnnnnnnnnnnnnnnnnsssrnnnnrrnrnnnnnnnnnnnnsnsssssnnnnnnnnsssnnnnnn 12 50 Email service configurati Olis seenwsbisesistisnntosi snsissbisusiorbisnsbisnsiosis is 14 6 Central Management ccccccssccssscccscccsccccscccsscccseccesccessccesccessccesscnssccessccesscnssccsscnsscenssceecs 14 GE cca Frc E EE OE E eR 14 6 2 Installation REE 15 6 3 Login and EG 2 1 LEREN EEE NE N
30. t one channel of selected device only support Channel 01 presently Start Manual Record enable manual record for selected channel label auto changes into label of disable manual record label Main Stream connect device with main stream on tick means current selection is main stream Sub Stream connect device with sub stream on tick means current selection is sub stream Auto Adjust selected channel auto adjusts view proportion Check Time selected channel synchronizes time with PC Right click on preview window pop up dialog as Full Screen Auto Adjust Photo Record Stoo Display Full Screen select full screen for software full screen view double click to view full screen for single window Auto Adjust I on tick to display according to image proportion off tick to display according to window s size of multi picture view Photo I snapshoot selected window then save to hard disk default format is JPG Record enable manual record for selected window auto on tick Record Stop Display stop display for selected window Notice after stop display device is still in connection if device is on recording it keep recording after stop display 2 Cycle preview Only support cycle mode to view video on group list mode it needs to set groups before enabling cycle mode details refer to instruction of Group Management Click ep enable cycle mode click again to disable cycle mode For cycle mode
31. user admin no password SCS S S e e 5 2 Login device IPCAM can be accessed from open function in camera finder or directly by inputting access link IP added port via browser 1 Double click device in device list browser will pop up login interface 2 Directly access via browser by inputting device address such as IP Camera For IE FireFox Google safari Browser Sen In gj oelick here for computer Mobile Phone For Browser that supports Javascript Sign in my click here for mobile phone iPod touch iPhone 2G 3G 3065 4 and iPad dedicated SLT Na a e f r Iphone or Ipad Language English do not show next time Picture 5 login interface 9 MH3E E A1 14 36 18 ADL EasyN Stream main stream Y 14 36 18 DL n EasyN Stream main stream Y Record click rm Snapshot click EEE Listen click it will change into then we can listen sound coming from camera terminal on computer monitoring interface click again to disable the function 10 MH3E E AI C EasyN i por Talk click it will change into then we can talk to camera terminal via headset on computer terminal Click again to disable the function 5 4 Basic network configuration Basic network configuration IP address it can support manually modifying IP mask gateway DNS etc Http port In most cases the default port is 81 b
32. ut if the current network limits the port we should select other port ranged 0 to 65535 such as 8080 85 8888 etc IP Camera Options system Settings Networkine lial Jetworking Networking me Wireless Settings IP access Manually set the IP Remote Access Advanced Settings IF Address 192 168 2 212 Alarm Settings LAN Netmask Address 255 255 255 0 Video amp Audio Settings LAN Gateway Address 192 168 2 254 amt Preferred DNS 202 96 128 86 Alternative DNS 0 0 0 0 HTTP HTTP Part 212 1 65535 Except 21 and 25 OK Refresh Picture 10 network parameters configuration Wireless network configuration The settings interface as picture ll click search button then it will pop up a page to display list of searched wifi network select the network to join in the parameters of the network will fill in the options blank such as SSID encryption algorithm etc user need to input ec set button Note please cable connect device before configuring wifi after set password and confirm password After configuration click restart device to enable wifi function 11 MH3E E AI1 gt EasyN IP Camera Options system settings Wireless Network Settings Wireless Settings Networking HNetworking Wireless Settings Enable Wireless Open Close Remote Access Advanced Settings SSID far search Alarm Settings Connection mode Routing Video a
33. ymbian Android management snapshot alarm picture view directly viewing Support 32G SD card local memory to alarm Local memory snapshot and record i eee OS Ore pit ROIC Embedded Processor H 264 main profile level 3 main stream and Compression second stream CMOS 0 3 megapixels Main stream 1 25 fps second stream 1 25 fps Video VGA 640480 QVGA 320 240 QQVGA 160 120 Image Brightness contrast adjustable adjustment RJ 45 10 100Mb self adaptable Ethernet slot Support TCP IP HTTP ICMP DHCP FTP SMTP Protocol PPPoE etc _4 MH3E E Al G EasyN output Alarm detect Motion detection sensitivity configuration Alarm Support Email FTP upload image call preset Alarm linkage position GPIO control etc Certificate ISO FCC CE SASO RoHS Certification 3 Appearance and interface 3 I Device appearance Picture 1 device appearance 3 2 Device interface HEIT FIAT SD F PAR STG HEAT VOR Picture 2 device interface power external power adapter DC 5SV 2A Ethernet interface 10 100M self adaptable Ethernet interface can connect to many network devices such as hub router switch etc Network light flickering when network connecting va MH3E E AI G EasyN Power light always on when power on SD card support 32G SD card I O interface one channel alarm input with 3 4 pins input grounded low electric level trigger TTL control for output with 1
Download Pdf Manuals
Related Search
MH3E E A1