Home

Catalogue - Ray

Contents

1. raise and lower function of the test stations ensure easy access to the test sample supports for sample loading and retrieval before and after each test Each test station is fitted with a PT100 platinum resistance thermometer which accurately records the temperature next to the sample under test to 0 1 C and an electronic displacement transducer which measures the sample displacement to 0 01mm as standard or to 0 001mm as an option The on board microprocessor ensures test result accuracy and repeatability and the built in liquid crystal display LCD provides simple on screen instructions reducing user error Test parameters are easily selected using the onboard membrane keypad A simple data selection process and yes no prompts make the operating procedure very simple to undertake The microprocessor s temperature control function ensures the ramping rates of either 50 C h or 120 C h are kept within the specified test standard requirements as well as performing non standard ramp rates to customers own specific needs Test 65 temperatures of 300 C are easily achieved and to ensure optimum safety at higher temperatures the Nitrogen Blanket option is recommended THE METHODS OF TESTING AVAILABLE ON THE APPARATUS ARE HDT Heat deflection distortion test A standard sized test specimen is subjected to a bending stress whilst the temperature is raised at a uniform rate The temperature at which the specified deflection occurs
2. The Explorer series of analytical and precision balances has established itself as market leader in its class A compact design the Explorer delivers accurate results within seconds improving operator efficiency productivity and throughput with a stabilisation time upto 50 fasterthan basic models ts superior anti vibration system makes the Explorer ideal for unstable working conditions t is supplied with a frameless flip top anti static glass draft shield which provides unobstructed access to the working chamber Simple prompts using Icons on the large colour VGA display make navigating the menus easy and the resistive touch screen display quickly responds to the operators touch or stylus Also included on the Explorer is a four point touch less sensor for total hands free operation and the internal calibration procedure ensures accuracy is maintained even if ambient room temperatures effect the weighing accuracy Test results can be downloaded via the onboard RS232 serial interface connector direct to Excel or to an optional thermal printer OTHER FEATURES INCLUDE Qwerty keyboard and numeric keypad 14 builtin applications 11 operating languages NTEP and OIML models available WEIGHING BALANCE menu lock switch security bracket integral weigh below hook for below balance weighing applications removable stainless steel weighing platform stability indicator overload and under load indicators auto stand
3. ES vo ne 46 mex SE oe o l oe e e von WES 48 BEEN gt TECHINI 7EST SO it n 52 XA e E 54 DS NM 56 WARES p WITH PUNCTURE IMPACT 58 FALLING WEIGHT MPACT TESTER RR FWT 27 60 ADVANCED HDI VICAT SOFTENING POINT RR HDV2fahdl D V4 RS 64 RR HDVo 68 COLI TESTER KR CF 70 DEMONSTRATION amp CALIBRATION MACHINE DEMONSTRATIONS SERVICING CALIBRATION amp REPAIR o o CNET 96 RAY RAN LOW TEMPERATURE eps EN ENVIRONMENTAL STRESS CRACKING APPARATUS RR ESC UNRESTRAINED LINEAR THERMAL FILM SHRINKAGE LIQUID IMMERSION METHOD AA UNRESTRAINED LINEAR THERMAL FILM SHRINKAGE PLATE METHOD BV FOHP an k Ti Likas M ELMENDORF TEAR TEST on L Wo A THERMAL AGEING UNIVERSAL TESTING ER UTM M250 ER UTM M350 RENE BR UIM M500 WINTEST ANAIS N PRECISION THICKNESS GAUGE RRT fran E INDENTATION HARDNESS AS 10227 ee E DUROMETER BENCH STAND IBIS sen RAY RAN MELT FLOW MEASUREMENT RAW MATERIAL EVALUATION 6 Series Manual Basic Melt Flow System MODEL 6MBA The 6MBA is the basic model offered within the Ray Ran Range of Melt Flow Indexers The manually operated test procedure is very simple to undertake Molten
4. M nn e e ma ans A w A w J EL u 1 i To so you simply email them as a PDF attachment or send them as a Microsoft Word document or an Excel file Test data can also be exported in ASCII delimited format to Microsoft Excel or other spreadsheet software using search criteria such as References Start Date and End Date It is also possible to export Minimum Mean and Maximum results data based on a periodic selection daily weekly monthly etc to highlight trends over a specified interval The integrated HTML help file with added search function includes simple explanations of machine SAMPLE amp COMPONENT TESTING RAY RAN Flash representation of tests and test calculations This feature also operation test result descriptions and graphical enables you to view graphically how specific test results are Calculated to help you verify the correct selection of test calculations RESULTS FEATURES INCLUDE e Comprehensive library of industry standard calculations e Configurable statistics summary for each test report e Customised test calculations e Visual Pass Fail e Sequential calculations to take measurement at set intervals for long term tests etc e Custom statistics can be generated for selected calculation e Retrospective analysis of all test calculations e Calculate results on pre de
5. To conduct a test prepared samples are placed in the enclosed chamber on their supporting fixture which can be adjusted vertically to accommodate different test sample sizes On the standard machine pipe diameters of up to 400mm Q can be tested easily If the optional pneumatic clamping fixtures are used the integrated safety system of the apparatus ensures that the clamp does not operate until the cabinet door is in the closed position THE METHODS OF TESTING ON THE UNIVERSAL FALLING WEIGHT IMPACT TESTER ARE Round the Clock Method Lengths of pipe from a batch or production run are subjected to blows from a known mass which falls from a specified height as per test standard ISO 3127 EN744 Staircase Method Lengths of pipe are subjected to blows from a known mass and shape but is dropped from differing heights depending on the results of each blow as per test standard EN1411 The Universal falling Weight Impact Tester is ideal for product development and quality control within production research and development labs and teaching institutions and will more than meet your testing requirements Various drop heights are available as well as larger bases to accept larger pipe diameters and Tup Striker shapes to customers individual requirements Falling Weight impact Tester 61 FALLING WEIGHT IMPACT TESTER RR FWT TECHNICAL SPECIFICATION e 2meter drop height test e mpactenergies up to 314 machine Joul
6. WARNING HOT SURFACES Hl LT Ei E him PRODUC CATA Wr VARNING SIUIRFACES 0 JT SURFACES 1 k r nan e v RAY RAN TEST EQUIPMENT WARNING HOT SURFACES gt gt E 3 i CONTENTS RAW MATERIAL EVALUATION MELT FLOW MEASUREMENT RR 6ME Ae 3 em 4 TECHN AE SU 5 MOISTURE ANALYSERS RAN A 3 0 2 0 7 7 n 8 2 ANALYTICAL PRECISION WEIGHING BALANCES Al nak IM 12 EXDEORER ka A SONE ee 14 AUTO DENSITY GRADIENT RR DGA 3 COLUMN amp 6 COLUMN 16 Ar sss 18 AT BULK DENSITY ASTM D1895 METHOD A amp 6 ASTM D1895 METHOD C 7 22222 22 DENSITY BALANCES ADVENTURER PRO gt 25 EXLLORER PhO EE sss 26 e TEST SAMPLE PREPARATION ChiG S A MiP REO EILE RDUM deeem 23 NE ARA 30 Pe SIRE Ye TO EE n gt TEST SAMPLE MOULDING APPARATUS 22 O E 29 TEST SAME illa RR TSC QI NE 38 ANO WOLD NOTCHING CUTTER MICRO CUTTING MACHINE sy __ 42 SAMPLE amp COMPONENT TESTING ADVANCED STATIC 8 DYNAMIC ESTER el 42
7. SAMPLE PROFILE CUTTER RR CNC2 TECHNICAL SPECIFICATION 600mm x 300mm x 175mm XYZ axis approximate 910mm x 480 mm table size e High Quality 1 5KW Router Spindle Variable spindle speeds from 2400 rpm to 24000 rpm e High quality guide rail and lead screw system e Positional homing switches e Total enclosure safety cabinet for user protection e Internal lighting e Emergency Stop Button e Computer interface with cabling and Windows Flashcut software e Low cost CNC programs available to any International test standard 220 240 volts 1 ph 50 Hz Uses industry standard G amp M codes Product user manual e E declaration certificate e 1yearreturn to base warranty OPTIONAL ANCILLARIES e Tooling and damping kit Pipe clamping fixture e Single flute tungsten carbide milling cutters e Pre written CNC programs e Dust extraction e 1 0 spindle expansion board e Auto tool change system amp tool rack WEIGHTS amp DIMENSIONS RR CNC2 Net Weight kg Width cm Depth cm Height cm RAY RAN CNC2 SAMPLE TEST SAMPLE PREPARATION PROFILE CUTTER The Model 2 CNC Sample Profile Cutter designed and manufactured by Ray Ran is the ultimate bench top 3 axis vertical milling machine used for Test Sample Preparation and 3D rapid prototyping It is has set new standards for cutting hard dense polymer sheets and laminates up to 100mm thick as well as polyethylene and polypropyle
8. e Conforms to ASTM 01895 method C Measuring funnel e Weight plunger e Lead shot WEIGHTS 8 DIMENSIONS ASTM D1895 C Net Weight kg Depth cm ISO METHOD R60 TECHNICAL SPECIFICATION e Conforms to ISO R60 specification e Measuring cup 100 Stand with funnel shut off de a WEIGHTS 8 DIMENSIONS ISO METHOD R60 Net Weight kg Width cm Height cm RAY RAN RAW MATERIAL EVALUATION ASTM 01895 METHOD For course flakes strands chips and cut fibres that cannot be poured using test methods set BRETT I 1 2 3 Y T WI Ia ir Ail A and Ray Ran offer measuring cylinder and plunger to method C of the ASTM test standard Since these types of materials to be tested are very bulky when loosely poured and are usually compressed lessen the bulk a measure of their density under a small compression load is very useful For this test a measuring cylinder of 1000 cm is supplied along with a scaled weight plunger with 1mm graduations on the outside Lead shot is used to increase the plunger weight to 2300g to compress the material under test TESTS THAT CAN BE CONDUCTED ARE e Apparent Density ISO METHOD R60 Primarily used to measure the apparent density of moulding material that can be poured readily through a OTH ER specified funnel the material under test is allowed to flow into a cylindrical cup with a known
9. movable clamp When the pendulum is released it strikes the movable clamp and breaks the test piece along its horizontal axis thus applying a pure tensile load to the test sample Complies to International Test Standard ISO 8256 Method A Impact hammer energies are available from 0 5 J up to 50 J PIPE TESTING The test is used for the examination of pipe sections and tubing for impact strength properties as either complete segments or small sections of pipes dimensions up to 25 mm can Sample diameter be tested with hammer energies of 7 5 15 J The test specimen is supported as a horizontal SAMPLE amp COMPONENT TESTING beam similar to Charpy tests conditions and complies to International Test Standards ISO 7628 and ISO 9854 Sample diameter dimensions up to 25 mm 0 98 in can be tested with hammer energies of 7 5 15 J 5 6 11 1 ft lbs or 50 J 36 9 ft lbs as defined in the ISO standards COMPONENT The component test examines of both the design and the manufacturing the influences processes of particular component by measuring the impact energy in Joules required to break a complete or part of a section of a finished component If a particular component has a critical cross sectional area that needs to be tested then by entering this area into the microprocessor the energy in KJ M can be obtained The apparatus is supplied as standard with Ray Ran s Techni Test Windows based PC so
10. multistage step testing for highly specialised testing requirements and also includes an extensive range of calculations applicable to many industries including all variations of force elongation stress and strain values and many others The virtual control panel allows the operator full control of all tester functions and the ability to conduct simple tests manually as well as providing easy access to stored test methods system configuration and diagnostics Test results are displayed in real time on the auto scaling graph and in tabular format with each test in the batch highlighted in a different colour The software also offers automated storage of all test data and test results Test reports are easily generated and test data can be transferred directly to other software applications for enhanced report generation SPC trend analysis or laboratory manager reports for example They can be exported to Microsoft Word and or Excel to provide you with full editing features and copy and paste capability to produce presentation quality test reports charts or test data in spreadsheet format Including company details and logos to complete that professional look Test reports are easily converted into Adobe PDF files 90 coro te Wa AAA IA w nen mann A A t y awr Yon a a a ne me e e m o o onma
11. the load cell capacity e Automatic recognition and calibration of load cells and extensometers with instant calibration check facility e 80090 overload capability of load cells without damage e Small footprint design giving economy of bench and floor space e High efficiency pre loaded self cleaning ballscrews for fast quiet testing Fitted with sealed for life lubricated end bearings e Crosshead guidance system providing precise alignment and smooth running e Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free operation and 4 000 000 steps per revolution positional control e High speed data collection systems for up to 4 synchronous channels e 61 O channels for additional devices such as extensometers micrometers callipers balances etc SAMPLE amp COMPONENT TESTING RAY RAN e High stiffness loading frames with solid specialised steel crossheads and rigid extruded support columns with T slots for accessory mounting e Overload over travel and impact mcd protection S e Telescopic covers giving additional protection for ball screws against dust and testing debris e Extensive range of grips and fixtures for tension compression flexural shear peel and product testing etc e Awide range of contacting and non contacting extensometers is available including laser and video models e Force Measurement Universa
12. 100 120V AC at 50 or 60 Hz e Max speed at full load mm Power 1 2kW min 500 1000 Product user manual Crosshead Travel excluding e E declaration certificate grips 1059mm 1 year return to base warranty dependant on model amp load cell size OPTIONAL ANCILLARIES Range of manual grips Range of pneumatic grips with foot switch Compression platens round or square 3 point bending fixture 20 300mm span Load cell up to 20KN Clip on Extensometer for elastomers or metals Wide frame extension Height extension Remote connection software e gt A i WEIGHTS 8 DIMENSIONS RR UTM M500 mean EI q 26 a s 7p yo 4 SAMPLE 8 COMPONENT TESTING UNIVERSAL TESTING MACHINES 5 ANALYSIS WINTEST ANALYSIS THE ULTIMATE SOFTWARE PACKAGE IN FORCE MEASUREMENT WinTest Analysis is the advanced software suite supplied with the Ray Ran range of Universal Testing Machines It is multi functional and fully customisable software package that supports all industry standards including ISO ASTM and BS EN specifications The software covers tensile compression peel shear tear cyclic creep and multi stage testing It includes a wide range of industry standard test methods and the facility to create and store an unlimited number of bespoke test methods Additional flexibility is provided by user defined
13. a 120 angled V support as is impacted by the load carrier in a single drop The support rests can be manufactured to any test standard or customer requirement FLAT PLATE PLAQUE TESTING yi ew Ju t composites can easily be tested using the flat plate clamping fixture It is offered with various support rings to test to various international test standards and customers own specific testing requirements and can be either manually or pneumatically operated Fixtures for conducting Izod and Charpy tests are also available For specific component testing Ray Ran can design and manufacture bespoke clamping fixtures to meet customers individual testing requirements and parameters RAY RAN W A Mitutoyo ABSOLUTE e MESA ORIGIN ON OFF ADVANCED HDT VICAT SOFTENING POINT SAMPLE 8 COMPONENT TESTING ADVANCED HDT VICAT SOFTENING POINT APPARATUS RR HDV2 RR HDV4 AY RAN ADVANCED HDT VICAT SOFTENING POINT APPARATUS 2 8 4 STATION Designed and built to cover multiple international testing standards the Ray Ran Advanced HDT Vicat Apparatus utilises microprocessor technology to accurately determine the deflection and softening point characteristics of all thermo plastic test specimens The HDT Vicat apparatus allows for multiple simultaneous testing of samples depending on the amount of test stations available either 2 or 4 The simple manually
14. a report presentation if required In Test Results Viewer mode users have the ability to upload saved results from previous test for Material Comparison Data Manipulation or File Export Abnormal results that could be caused by air voids are clearly identified and can be removed from the test data bringing the batch statistics into a normal range ensuring that the test procedure does not have to be repeated saving time and material Test results displayed in viewer mode can also be exported as CSV files easily RAY RAN ajisji L2VdWI WA INANid SAMPLE 8 COMPONENT TESTING RAY RAN ADVANCED UNIVERSAL PENDULUM IMPACT TESTER RR IMT ADVANCED UNIVERSAL N PENDULUM IMPACT TESTER The Ray Ran Advanced Universal Pendulum Impact Tester utilises advanced microprocessor technology to determine the energy required to break or rupture specimens such as plastics composites ceramics and non ferrous metals to International testing methods for Izod Charpy and Tension Impact Testing Along with Pipe Testing Component Testing and Puncture Impact testing the Ray Ran Universal Pendulum Impact Tester should more than meet all of your testing requirements Built with operator simplicity in mind its ease of operation and high accuracy makes it ideal for product development and quality control within production research and development labs and teaching institutions The apparatus is extremely versatile Impact velocities
15. cell identification e Direct connection to e Load cell protection extensometers e High resolution load cell e WinTest Analysis User selectable load and operating software travel limits e RS232 output for PC Speed Range mm min 0 001 e Supply voltage 200 240V AC to 2000 or 100 120V AC at 50 or 60 Hz e Max speed at full load mm Power 0 45kW min 500 2000 e Product user manual Crosshead Travel excluding e E declaration certificate grips 1100mm 1 year return to base warranty dependant on model amp load cell size OPTIONAL ANCILLARIES Range of manual grips Range of pneumatic grips with foot switch Compression platens round or square 3 point bending fixture 20 300mm span Load cell up to 20KN Clip on Extensometer for elastomers or metals Wide frame extension Height extension Remote connection software 26 N A Y WEIGHTS 4 DIMENSIONS RR UTM M350 OA A mn a SAMPLE 8 COMPONENT TESTING UNIVERSAL TESTING MACHINES RR UTM M500 UNIVERSAL TESTING MACHINES M500 Power and affordability has been brought together in the M500 Universal Testing Machine offered by Ray Ran This powerful twin column machine is used in all industries worldwide for materials testing product testing research and development and quality control applications Fully automated by advanced computer technology the testing system with high precision control ensures simplicity in operation and
16. consists of a low temperature bath with electronic PID temperature controller and a PT100 platinum resistance thermometer accurate to 0 1 which accurately controls the heating cycle of the test and records the temperature next to the test samples Precise temperature control is readily achieved by means of a built in heater which in conjunction with controlled addition of refrigerant a enables any temperature down to 70 C to be readily attained and held To ensure temperature stability within the bath during the cooling and heating cycle a stirrer motor system is also fitted to the apparatus Suitable means should be used to ensure the liquid medium can be lowered to the test temperatures required such as adding solid carbon dioxide dry ice to Methyl Alcohol The test procedure is very simple to conduct and a sufficient number of test specimens should be tested so the Brittleness Temperature can be calculated on a statistical basis Test specimens are clamped in a stainless steel cantilever beam fixture which is immersed into the low temperature bath The specimens are allowed to condition at a maintained temperature in the heat transfer medium and are then simultaneously subjected to a single blow given by a free falling pendulum impact hammer through the means of an intermediate striker at a constant velocity of 2 1 m s The samples are then removed and examined to determine whether failure has occurred Temperat
17. cutting process is simply done by pulling the protective polycarbonate screen in a downward direction and letting the press do the rest generating cutting forces up to 50 KN depending on the input pressure to easily cutting through sheet materials such as polypropylene and polyethylene up to 8mm thick The press is supplied with a cutting base of 25cm x 15cm and polypropylene cutting board to support the material the sample is to be cut from A polycarbonate safety guard which will not allow the machine to operate unless it is in the closed position ensures operator safety To deliver maximum performance the cutter must be set up relative to the cutting board so that at full stroke the cutter will just depress the surface of the cutting board 36 The fixing arbour on the press will accept a 25mm dia cutting tool shank as standard Other size fixing arbours can be supplied to customer requirements In most cases the thickness of the material that can be cut will not just depend on the strength of the material but also on the lateral flexibility of the material to allow the cutter to penetrate down into and pass through the material Sd3i LLf12 3 IdlN VS 1531 TEST SAMPLE PREPARATION RAY RAN TEST SAMPLE CUTTERS Ray Rans Test Sample Cutters are manufactured from high grade D3 tool steel to give long lasting cutting edge sharpness for repeatable test specimens and more accurate test results The cutte
18. e __ esu cm Na RAY RAN ADVANCED STATIC AND DYNAMIC FRICTION TESTER SAMPLE 8 COMPONENT TESTING ADVANCED FRICTION TESTER RR FT RAY RAN ADVANCED STATIC AND DYNAMIC FRICTION TESTER The Advanced Static and Dynamic Friction Tester brings together accurate load cell measurement with advanced microprocessor technology to give the most accurate user friendly Friction Tester system to be designed by Ray Ran Frictional properties of plastic flm and other materials are accurately calculated with specified test conditions selected such as test sled weight test velocity and temperature making this apparatus ideal for all types of flexible packaging foils paper board rubber linoleum textiles and leather Accurate and repeatable test results for Static and Dynamic Friction co efficient values with normal separating loads ofup to 1 kg are easily determined for any combination of materials using a standard test sled or specific peel attachment To calculate the static friction the apparatus records the peak friction value at the precise moment that movement occurs after which the dynamic friction is immediately observed To measure this peak friction value the advanced microprocessor continually monitors the output signals ofthe load cell Load cell readings are taken beyond the peak load in order to confirm that the slope of the load curve is reducing When the static frictional value has been determined by the m
19. filling system No need to premix liquids g ml or kg m3 units Variable top and bottom buffer volumes Previous stored filling routines Automatic density calculation Mains lead 5mtrs of 4mm tubing supplied Weighted end for the outlet tube Spare pump tubes amp connectors 110v 240v 50 60Hz Product user manual CE declaration certificate 1 year return to base warranty Product user manual Depth cm Height cm RAY RAN RAW MATERIAL EVALUATION MICROPROCESSOR CONTROLLED DENSITY GRADIENT FILLING SYSTEM The Microprocessor Controlled Filling System Buffer zones can be added to the top and bottom of the column to slow down the deterioration of the column and gradient settings can be stored for future use including controlled top and bottom densities column volume tube volume and buffer volumes as well as selectable density offered by Ray Ran is by far the most accurate way of producing a density gradient within your column Not only does it effortlessly integrate with the Ray Ran 3 and 6 column equipment but can also be used with units with either g ml or kg m3 available any other make of density gradient column It saves considerable time in the preparation and building of The filling procedure is fully automated using indexing stepper your density gradient and overcomes a lot of the motors and peristaltic pumps and any two miscible liquids trial and error that is associated with can be used t
20. graphic display 4 wire resistive touch screen Electrical characteristics AC Adapter Input 100 240 VAC 0 6A 50 60 Hz CSA UL and FCC approved OPTIONAL ANCILLARIES e Thermal Printer Impact Printer Printer Cable Ethernet Interface Connector WEIGHTS 8 DIMENSIONS EXPLORER PRO Net Weight kg Width cm Depth om Height cm RAY RAN RAW MATERIAL EVALUATION EXPLORER PRO DENSITY Determination Balance has established itself a market leader in its class A compact design the Explorer Pro delivers accurate results within seconds improving operator efficiency productivity and throughput with a stabilisation time up to 50 faster than basic models lts superior anti vibration system makes the Explorer Pro ideal for unstable working conditions is supplied with a frameless flip top anti static glass draft shield which provides unobstructed access to the working chamber Simple prompts using Icons on the large colour VGA display make navigating the menus easy and the resistive touch screen display quickly responds to the operators touch or stylus Also included on the Explorer Pro is a four point touchless sensor for total hands free operation and the internal calibration procedure ensure accuracy to O 1mg is maintained even if ambient room temperatures affect the weighing accuracy 26 M DETERMINATION BALANCE The Explorer Pro Analytical Series Density The Explorer Pro accurat
21. including laser and video models 85 i V Edu UNIVERSAL TESTING MACHINES RR UTM M250 TECHNICAL SPECIFICATION e Single column machine e Throat 200mm e A Cservo drive e Vertical space 1170mm e Machine Capacity 5N 3kN e Direct connection to e Auto Load cell identification extensometers e Load cell protection e WinTest Analysis e High resolution load cell operating software User selectable load and e RS232outputfor PC travel limits e Supply voltage 200 240V AC Speed Range 0 001 to or 100 120V AC at 50 or 60 Hz 1000mm min in steps of Power 0 3kW 0 001mm min e Product user manual Crosshead Travel excluding e E declaration certificate grips 1000mm e 1yearreturn to base warranty e Telescopic lead screw covers OPTIONAL ANCILLARIES e Range of manual grips e Range of pneumatic grips with foot switch e Compression platens round or square e 3pointbending fixture 20 300mm span e Load cell up to 3KN e Extensometer for elastomers or metals e Wide frame extension e Height extension e Remote connection software er WEIGHTS amp DIMENSIONS RR UTM M250 TE lt A LLI 2 lt SAMPLE amp COMPONE NT TESTING UNIVERSAL TESTING MACHINES RR UTM M350 UNIVERSAL TESTING machines 350 The M350 Universal Testing Machine is one of the most versatile m
22. is measured and recorded Testing is carried out in accordance with the ISO 75 parts 1 2 and 3 and ASTM D648 Test Standards For this test a required fibre stress of 0 45 1 8 or 8 00 MPa is easily selected Custom fibre stresses can also be managed by the microprocessor if required The unique binary weight system is used to apply the required fibre stress to the test sample and is automatically calculated by the microprocessor based on the sample size and span supports Temperature ramp rates sample size span and deflection values are also easily entered into the testing parameters of each station The HDT span supports of 100mm or 64mm are easily adjusted on each tool station to suite your testing method of Flat wise or Edgewise sample testing Each machine is supplied with HDT test nibs with 3mm radius which are easily attached to the load displacement rods for testing in accordance with relevant international test standards ADVANCED HDT VICAT SOFTENING POINT APPARATUS RR HDV2 RR HDVA TECHNICAL SPECIFICATION e HDT Vicat testing enabled for Vicat testing available e Manual Raise Lower of test e Temp resolution 0 1 C Stations Temperature ramp rates of 50 Advanced microprocessor or 120 C hr control User defined ramp rates e 2or4sample test stations available e Digital temperature control e HDT span supports 64mm Temperature range to 300 C 100mm e Oil bath stirrer e Resolution 0 01mm e S
23. it over heats The temperature of each cell is measured by a3 wire platinum resistance thermometer sensor and is displayed on a switched digital temperature indicator The temperature accuracy of each individual cell is 0 5 C Sample support holders are also provided so test samples can be suspended in each cell prior to testing To ensure an accurate constant flow of air across the test sample each cell is fitted with a flow meter which regulates the air flow input between 50 500 cm min A single flow meter is also used to measure the air flow output from each cell To monitor the duration of each test cell the apparatus is also fitted with 6 individual hour counters which are set when the test is started 83 THERMAL AGEING APPARATUS RR TAA TECHNICAL SPECIFICATION Integrated oil bath Dual pump stirrer system Digital temperature control Oil tank capacity 30 litres 6 off Individual stainless steel test cells Test sample holders 50 500 cm3 min glass flow meter Output flow rate meter 6 way switchable temperature indicator Test cell hour counter Certificate of calibration Product user manual CE declaration certificate 1 year return to base warranty OPTIONAL ANCILLARIES Heat transfer medium 30 Itrs WEIGHTS 4 DIMENSIONS RR TAA Net Weight N SAMPLE 8 COMPONENT TESTING UNIVERSAL TESTING MACHINES RR UTM M250 UNIVERSAL TESTING MACHINES M250 The M
24. min Accuracy 0 01mm Absolute relative and auxiliary modes mm and percent Programmable extension limits e Speed Control Drive system temperature and current protection Positional jog speed 0 001mm min to maximum Speed setting increments 0 001mm min e High speed data collection systems for up to 4 synchronous channels e 61 0 channels for additional devices such as extensometers micrometers calipers balances etc e Load Frame Rigid frame using dual slide crosshead guidance system and rigid extruded support column Frame stiffness 5kN mm plus K e High stiffness loading frames with factor facility built in solid specialised steel crossheads and rigid extruded support columns with T slots for accessory mounting Re circulating ball screw with bellows e Electronic limit trips total travel trips and customer programmable safety stops e Overload over travel and impact protection e Telescopic covers giving additional protection for ball screws against dust and testing debris e Rubber mat front protection e Remote connection self diagnostics software and registration Giving direct connection ofyour machine for remote service on line training software upgrades new test methods uploaded etc Extensive range of grips and fixtures for tension compression flexural shear peel and product testing etc Awide range of contacting and non contacting extensometers is available
25. particular bulk density if the cylinder is disturbed the powder particles will move and usually settle closer together resulting in a higher bulk density For this reason the bulk density of powders is usually reported both as freely settled or poured density and tapped density where the tapped density refers to the bulk density of the powder after a specified compaction process usually involving vibration of the container ASTM D1895 METHOD B The larger of the ASTM family Method B is primarily used to measure the apparent density of larger coarse granular materials dice or pellets that cannot be poured readily through the method A funnel The material under test is allowed to flow into a cylindrical cup with a known volume of 400cm TESTS THAT CAN BE CONDUCTED ARE e Apparent Density e Bulk Factor e Pourability ASTM D1895 METHOD A 8 METHOD B ASTM D1895 METHOD A TECHNICAL SPECIFICATION Conforms to ASTM 01895 method A V shaped funnel Measuring cup 100cm Stand with funnel shut off WEIGHTS 8 DIMENSIONS ASTM D1895 A Net Weight Depth einem ASTM D1895 METHOD B TECHNICAL SPECIFICATION Conforms to ASTM D1895 method V shaped funnel Measuring cup 400cm Stand with funnel shut off WEIGHTS DIMENSIONS ASTM D1895 A Ner eighe gt ASTM D1895 METHOD amp ISO METHOD R60 ASTM D1895 METHOD C TECHNICAL SPECIFICATION
26. screws against dust and testing debris Extensive range of grips and fixtures for tension compression RAY RAN flexural shear peel and product testing etc e Awide range of contacting and non contacting extensometers is available including laser and video models e Force Measurement Universally Calibrated better than Grade 0 5 EN 7500 1 DIN 51221 ASTM 4 AFNOR A03 501 Range 0 4 to 100 minimum Automatic identification of load cell Resolution 1 part in 500000 with auto ranging Electronic load cell protection e Extension Measurement Full frame length to 0 001 mm Resolution 0 001 min Accuracy 0 01 mm Absolute relative and auxiliary modes mm inch and percent Programmable extension limits e Speed Control Drive system temperature and current protection Positional jog speed 0 001 mm min to maximum Speed setting increments 0 001 mm min e Load Frame Rigid frame using dual slide crosshead guidance system and rigid extruded support column Frame stiffness 50kN mm plus K factor facility built in Re circulating ball screw with bellows Electronic limit trips total travel trips and customer programmable safety stops Rubber mat front protection 87 UNIVERSAL TESTING MACHINES RR UTM M350 TECHNICAL SPECIFICATION e Twin column machine e Telescopic lead screw covers e A Cservo drive e Throat 295mm e Machine Capacity 5N 20kN Vertical space 1275mm e Auto Load
27. standard cutter wheel profile fitted to the apparatus is a 0 25mm radius V notch Cutter wheel profiles of 0 1mm and 1 0mm radius as well as 0 8mm and 2 00mm U notch cutter wheels are also available Non standard and special notch requirements can also be provided for 41 NOTCHING CUTTER RR NC TECHNICAL SPECIFICATION Advanced dedicated microprocessor control Easy to read LCD Touch membrane keypad Memory feature Cutter speed range from 350 rpm to 2500 rpm Traverse speed range 0 06 mm rev to 1 0 mm rev Metric and imperial traverse speeds units Anti vibration linear motion slide Multi sample loading Cutter wheel 0 25mm radius included Notch depth comparator Notch depth gauge block Easy clean removable waste tray Polycarbonate safety guard Electrical Interlock Emergency stop button Product user manual CE declaration certificate 1 year return to base warranty Notches to International Test Standards Including ASTM D256 D6110 150 179 180 8256 DIN 53453 OPTIONAL ANCILLARIES e Dual tooth cutter wheel 0 01mm Rad V notch Dual tooth cutter wheel 0 25mm Rad V notch Dual tooth cutter wheel 1 00mm Rad V notch Dual tooth cutter wheel 0 80mm U notch Dual tooth cutter wheel 2 00mm U notch WEIGHTS 8 DIMENSIONS RR NC Net Weight kol 3NIHIVIA DNILLILND ONIN TEST SAMPLE PREPARATION RAY RAN MICRO CUTTING MACHINE FOR THIN MATERIALS Built with absolute simplicity the Ray Ran
28. to determine film shrinkage is similar to the liquid immersion method notably to determine the amount of shrinkage of a film when heated to release the internal stresses produced due to the manufacturing methods The integrated hot plate with digital temperature controller heater and a PT100 platinum resistance thermometer accurately maintains the test temperature to within 0 1 C and the built in electronic timer monitors the duration of the test the hot plate and cooled to room temperature It is then re measured and its percentage shrinkage determined The hot plate test procedure is very simple and quick to conduct A film sample of round or rectangular shape is placed on a hot plate which is maintained at a constant temperature The surface of the hot plate is lightly oiled with silicone oil to ensure good heat transfer from the hot plate to the film and a light cover plate which keeps the film flat is placed on the top of the film sample After a set time the film is removed from Although the Hot Plate Film Shrinkage Apparatus is not controlled by any international test standards it s economical features and high temperature accuracy make it a valuable piece of testing equipment within the polymer industry 79 THERMAL FILM SHRINKAGE HOT PLATE METHOD RR FSHP TECHNICAL SPECIFICATION Simple determination of Unrestrained Film Shrinkage Hot plate method Simple to operate PID electronic temperature control Resolu
29. volume of 100cm MO D L5 ARE TESTS THAT CAN BE AVPILABLE CONDUCTED ARE ON REQUEST e Apparent Density 2 Bulk Factor PLEASE CONTACT RAY RAN FOR MORE INFORMATION REGARDING YOUR SPECIFIC REQUIREMENT RAY RAN SJONV IVS ALISN3CI RAW MATERIAL EVALUATION RAY RAN ADVENTURER DENSITY DETERMINATION BALANCE The Adventurer Pro Analytical Series Density Determination Balance has established itself as one of the industry s most versatile balances A compact design it is supplied with a metal base and ABS shell ABS top housing glass draft shield with flip top door and replaceable in user cover It determines the density of fluids and the specific gravity of solid materials by using the Archimedean Buoyancy Method Simple menu prompts with large backlit 2 Line liquid crystal display make the equipment user friendly with a display resolution at 0 1 mg The internal calibration system ensures weighing accuracy allowing you to calibrate the balance prior to use without the need of external weights To conduct a test the sample is first weighed in air and again when submerged in a liquid By determining the loss in weight which is gt Br directly proportional to the mass of the fluid it has displaced the specific gravity and density is readily calculated Test results can be downloaded via the onboard RS232 serial interface conne
30. 100 platinum resistance thermometer accurate to 0 1 C which accurately controls the heating cycle of the test To ensure temperature stability within the bath during the cooling and heating cycle a stirrer motor system is also fitted to the apparatus Suitable means should be used to ensure the liquid medium can be lowered to the test temperatures required such as adding solid carbon dioxide dry ice The specimen clamping mechanism is manufactured from stainless steel and has one fixed side with the other side mounted in low friction bearings which is allowed to rotate The torque is applied to the test sample by placing known weights to the pulley system which causes the clamped test specimen to rotate or twist about its vertical axis Angular deflection measurements in degrees are then taken from the integrated radial dial indicator The actual test is very simple to conduct The temperature RAY RAN of the bath is lowered to a temperature that will cause the sample to approximately twist a known angle of deflection Heat or increased torque is then applied to the sample to increase its twist to a given angle of deflection subject to the international Test Standard you are working to From the temperature and the angle of deflection readings taken the apparent torsional modulus of elasticity can be determined Simple and unique this apparatus has become a valuable addition to the Ray Ran product range of materials testing equ
31. 100 120VAC 150mA 220 240VAC 100mA 50 60Hz CE CSA UL and FCC approved 18 selectable units of measurement non OIML approved OPTIONAL ANCILLARIES WEIGHTS 8 DIMENSIONS DISCOVERY Net Weight kg Width cm Height cm Thermal Printer Impact Printer Printer Cable Ethernet Interface Connector Computer Software Dust Cover Anti Theft Device RAY RAN DISCOVERY WEIGHING BALANCE The Discovery weighing Balance is the professional s RAW MATERIAL EVALUATION The Discovery s repeatability and linearity performance is 2x better than most semi micro balances in its class Made from a glass and steel construction it resists the effects of static and corrosion increasing balance stability and accuracy as ET MES well as extending product life gt 7 OTHER FEATURES INCLUDE Selectable filters protective in use cover integral weigh below hook easy to use keypad up front level indicator stability indicator choice when it comes to weight measurement It features a rigid construction and an advanced internal calibration system offering the performance you would expect to find only environmental in premium priced balances A compact design the Discovery Pro delivers accurate results within seconds operator productivity The easy to use balance software utilizes text prompts to guide users through WW applications and balance setup Delivered through 2 line improving efficiency a
32. 250 Universal Testing Machine is the smallest of the models offered by Ray Ran within the product range The small footprint single column machine has a range of 5N to 3KN and is used in all industries worldwide for materials testing product testing research and development and quality control applications Fully automated by advanced computer technology the testing system with high precision control ensures simplicity in operation and highly accurate test results The machine is offered in two models the standard CT and integrated AT range The CT Universal Testing Machine uses feature rich WinTest Analysis software for control and testing with comprehensive on board test methods that are compliant with all relevant industry standards including advanced standard and complex multistage test procedures which are fully configurable and controlled using a standard PC interface PC systems can be supplied or customers can utilise their own desktop computer or laptop to operate the machine The AT Universal Testing Machine is a stand alone machine 84 which utilises the latest integrated touch screen technology and is fitted with an integrated industrial computer module comprising 1 GHz CPU with 256MB Ram 40 GB Hard Drive with Windows XP operating LAN USB amp RS232 ports The AT uses the feature rich WinTest Analysis software for control and testing with comprehensive on board test methods that are compliant with all rele
33. 3 thickness gauge can be exported to Microsoft Excel via the RS232 connector using the interface software All measured and calculated parameters are transferred along with the date time stamp instrument serial number and calibration date Full test statistics can be easily viewed or printed to label for easy documentation control METHODS OF TESTING INCLUDE e STANDARD TEST Full statistical analysis of up to 500 readings e BATCH TEST Calculates the thickness difference between two measurement sets used to assess the thickness of coatings adhesives or sample batches e STANDARD TARE TEST Automatically tares the instrument before each test using user defined conditions INSTRUMENTS CAN BE CONFIGURED TO MEET ANY OF THE STANDARDS LISTED BELOW PLASTIC FILM BS 2782 6 DIN 53370 ISO 4593 ASTM 06988 PAPER 8 BOARD ISO 534 ISO 3034 DIN 53105 BS EN 20534 BS 4817 BS EN 12625 3 BS 7387 TAPPI T SCAN P7 SCAN P31 SCAN 47 No 3 TEXTILE ISO 5084 ISO 2589 ASTM D1777 ASTM D5199 ASTM F36 FLOOR COVERINGS EN428 FLEXIBLE PACKAGING ASTMF2251 TAPE DIN EN 1942 ASTM D3652 SAMPLE amp COMPONENT TESTING RAY RAN PRECISION THICKNESS GAUGE RR PTG TECHNICAL SPECIFICATION M D LS AVA LA B e Resolution 0 1 um 0 01 um FT3 U e Repeatability Better than 0 4 pm Reproducibility Better than 0 8 um e Measurement Range 0 4000 um 0 19000 um extended ran
34. 79 ISO 180 and ASTM D256 At the heart of the machine is a custom built adaptive Microprocessor Control Unit with LCD screen ensuring feed and cutter speeds are always selected for optimum performance Adjustments to cutting parameters are made using the integrated membrane keypad and are stored in the memory feature of the microprocessor Cutter speed ranges from 350 to 2500 rpm are easily controlled and with minimum feed rates of 0 06mm rev cutting parameters for even the toughest of materials are easily achieved The anti vibration guide rail system optimises profile accuracy and the multi sample loading feature of the vice can accommodate up to 16 test specimens 4mm thick all accurately cut within approximately 20 seconds increasing productivity The quick auto return feature ensures the vice is always in the correct place for loading and unloading the test specimens and the micro height adjustment notch depth comparator and sample setting gauge ensure that the cut notch depth is accurately controlled A polycarbonate guard is fitted for operator safety totally enclosing the working area 1 m as and provides an electrical interlock so the machine does not operate when the guard is open The Dual Tooth Cutting Wheels used on the Autocycle Notching Cutter are designed to reduce cutter load on the sample being notched They are tungsten carbide tipped optically ground and diamond lapped to very close tolerances The
35. G JIG Used to make a controlled imperfection in the test sample e SAMPLE BENDING CLAMP Used to induce a concentrated stress in the sample e SAMPLE TRANSFER TOOL Used to move test samples from the bending clamp into the specimen holders To conduct a test the material is cut to the required shape and shape and marked with a concentrated notch An induced stress is made on the sample and it is place into the test sample rack and moved to the test tube which is filled with the test reagent and placed into the test bath at a constant temperature At timed intervals the samples are checked for any cracks developing at 90 to the notch The number of failures is recorded 75 ENVIRONMENTAL STRESS CRACKING APPARATUS RR ESC TECHNICAL SPECIFICATION Simple determination of Stress Cracking PID electronic temperature control Resolution 0 1 C PT100 sensor accurate to 0 1 C Integrated stirrer motor Electronic timer HR MIN SEC Stainless steel liquid bath Sample cutter Sample nicking jig Sample bending clamp Sample specimen holders Stainless Steel 48 glass test tubes Rubber stoppers Product user manual CE declaration certificate 1 year return to base warranty Conforms to ASTM D1693 OPTIONAL ANCILLARIES Sample specimen holders Brass WEIGHTS 4 DIMENSIONS RR ESC Net eight is so RAY RAN GOHL3W NOISH3WWI AINON JIVANIdHS IN 113 IVINH3H L HV3NITI C3NIVS8 LS38Nf SAMPLE amp COMPONE
36. INJECTION MOULDING RR TSMA TEST SAMPLE INJECTION MOULDING The Ray Ran Test Sample Injection Moulding Apparatus has been specihcally designed to produce a wide variety of laboratory test samples such as colour plaques tensile and impact test specimens as well as small components required for mechanical testing procedures The unique low cost moulding machine has a compact design for vertical bench mounting making the apparatus ideal for Research and Development Institutes Universities laboratories and small workshops Theapparatusispneumaticallyoperated with inletairpressures up to 10 bar 150 psi which is adequate for moulding most materials including Polypropylene Polyethylene and PET with injection pressures up to 450 bar 6500 psi Digital temperature control up to 400 C melts the polymer which is then extruded into the mould Digital tool block heating is included for more efficient polymer flow into the mould with temperatures up to 200 to prevent freezing The apparatus is supplied with a quick release cam operated tool block which will accept low cost tool inserts machined to any shape that will fit within the standard tool block TEST SAMPLE MOULDING PRESS parameters This makes the apparatus ideal if different samples RAY RAN TEST SAMPLE PREPARATION are required from the same material with minimal wastage injection gate of the tool block and and time T
37. ISO 306 and ASTM D1525 Test Standards For this test penetration loads are easily selected via the microprocessor for use with the single loading weights of 10 N and 50N The supplied cylindrical indentor test nib with 1mmY surface area is attached to the load displacement rod for sample testing in accordance with relevant testing standard The apparatus is supplied as standard with an integrated solenoid operated cooling system which is automatically activated after each test It can be connected to either a standard water supply or to the optional chiller unit for improved heat reduction The integrated cooling coil ensures rapid heat loss back to start temperature conditions within a short time period increasing production The self calibration feature of the apparatus ensures that the test results remain accurate Unique calibration plugs are supplied with each machine which simply plug into the PRT socket for you to carry out the calibration procedure Test results are downloaded to the supplied file capture software via the RS232 serial connector and are displayed in tabular format Results can also be saved as CSV files which can be opened with Microsoft Excel for data manipulation and report presentation If required the optional thermal printer can be supplied and fitted to the apparatus for direct results printout Built with operator simplicity in mind its ease of operation and high accuracy makes the Ray Ran Ad
38. Micro Cutting Machine has been specifically designed to cut thin plastic film and other materials into rectangular strips of varied widths using specifically designed cutting heads It is Ideal for making Tensile and Tear Test strips to various International Test Standards when conventional die cutting is not suitable or recommended This apparatus has rapidly become a valuable tool from the Ray Ran product range and is ideal for all types of flexible packaging film foils and paper up to 250um 0 25mm thick Extremely simple to operate the adjustable spring loaded head support slides on hardened and ground steel rail guides using linear roller bearings to maintain rigidity and accuracy when cutting The cutting head attachment is made from high quality tool steel and chrome plated for rust protection and holds 2 custom made razor sharp blades accurately spaced to within 0 01mm The cutter head blades are easily removed when they are worn and need replacing and no further adjustment to the new blades will be required when fitted With a minimum cut width of 0 25mm cutting heads can be supplied to cut single or multiple test samples in one single pass increasing your testing capacity and productivity The apparatus is supplied with a recessed base which can accept a cutting base pad such as card or rubber sheet which will help protect the cutting blades during the cutting process A clamping mechanism is also fitted to firmly supp
39. NT TESTING RAY RAN UNRESTRAINED LINEAR THERMAL FILM SHRINKAGE LIQUID IMMERSION METHOD Designed and manufactured by Ray Ran the Unrestrained Linear Thermal Film Shrinkage apparatus or more commonly referred to as the liquid immersion method is used to determine the thermal shrinkage of plastic film amp sheeting As a result of manufacturing processes internal stresses may be locked into a film or sheet which can be released by heating which causes shrinkage ofthe material The amount of shrinkage which takes place is dependent on the temperature during the test The results are plotted on a graph showing percentage shrinkage against temperature Manufactured to a high standard the apparatus is supplied with electronic digital temperature control temperature bath and all tooling accessories The integrated temperature bath fitted with digital temperature controller heaterandaPT100 platinum resistance thermometer accurately maintains the test temperature to within 0 5 C To ensure temperature stability within the bath a stirrer motor system is fitted and the built in electronic timer monitors the duration of the test The apparatus comes as standard with stainless steel specimen holders which hold the film samples of 100mm x 100mm square A sample cutting template of the same size is also supplied to ensure that the test samples are accurately cut to the required test dimensions To cond
40. Polymer is extruded through a closely controlled orifice die from the apparatus using pre set conditions of temperature and pressure produced by a dead weight system The extruded polymer is cut off manually and is then weighed Using the time interval to extrude the polymer its flow rate over 10 minutes can easily be determined thus oivino the Melt Flow Index or Melt Mass Flow Rate MFR in 9 10 min By conducting a simple Density Test at test temperature on the same material using the same pre set conditions and a known piston travel distance the Melt Volume Rate MVR can also be determined The 6MBA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner standard test die and piston along with 2 16 ko test load and cleaning ancillaries The temperature controller used isa 16th DIN type and displays the current temperature and set point and is accurate to 0 1 C A PT100 Platinum Resistance Thermometer is used to accurately control the temperature of the barrel The maximum allowable temperature variation along the length of the cylinder liner is in accordance with 1501133 International Test Standard An integrated timer is also fitted to accurately time the extrusion of the material in seconds to enable you to calculate the Melt Mass Flow Rate MFR All documentation is supplied including a product user manual and a fully traceable calibration certificate Optional weights can be supplied to c
41. UTO DENSITY GRADIENT APPARATUS The Auto Density Gradient Apparatus from Ray Ran has become the worlds benchmark for accurate density measurement of small solid specimens usino the column method Offered as a 3 or 6 column version the built in on board Microprocessor System accurately calculates the specimens density more quickly and more accurately by using the latest linear encoder technolooy that measures the samples position in the column relative to the calibrated glass marker floats Once the correct position of the sample Is recorded the density is displayed on the LCD screen To ensure results accuracy the Density Gradient Apparatus is supplied with digital temperature control to ensure the temperature of each column is at 23 C 0 1 C For ambient temperatures in excess of 23 C the integrated cooling coil can be used in conjunction with an optional water chiller unit so the correct temperature can be maintained To build each glass column with a fluid of a known density range a variable speed peristaltic pumped filling system is supplied with the apparatus Column filling speeds are variable from 0 5ltrs hr to 1 5ltrs hr to keep the gradient accurate The density range of the column is formed by mixing two fluids having different densities in the supplied glass flasks RAW MATERIAL EVALUATION The resulting solution has a density which when introduced damaged by the sweep basket To replace the floats and new into th
42. a specification Enhanced resolution of 0 01m for applications requiring ultra high precision Factory configured measurement 1 93 RAY RAN INDENTATION HARDNESS TESTING SAMPLE amp COMPONENT TESTING INDENTATION HARDNESS APPARATUS For accurately checking the shore hardness of a wide range of elastomers and plastic materials the Ray Ran range of Durometers are simply hard to beat Due to the fact that material hardness is a key characteristic of an elastomer and one which can be related to important material properties it is beneficial to be able to accurately measure the material hardness of a supplied product making them ideal for product design and quality control inspection Offered in analogue or digital scales each durometer can be used hand held or fitted to the Ray Ran bench mounted Lever Operated Durometer Stand Each durometer available utilizes the Shore method of hardness measurement and features a spring loaded indentor module which is pressed down squarely on the surface of the material to be measured resulting in its shore hardness The unique interchangeable modules allow for a wide and useful range of the Shore harnesses scales to be measured on one instrument Depending on the material being tested hardness scales are available to Shore A B C D DO and OO with each interchangeable module supplied calibrated to the dur
43. al and tabular format for analysis when downloaded to the supplied Techni Test PC software For quality control purposes High and Low limits can be defined when test results are downloaded showing the user instantly if the material is a pass or fail 55 ADVANCED UNIVERSAL PENDULUM IMPACT TESTER RR IMT TECHNICAL SPECIFICATION Advanced dedicated microprocessor control Touch membrane Alpha Numeric keypad Easy to read liquid crystal display Sequence logic menu auto prompt selection RS232 interface connector Ethernet Interface connector for LAN Networking Self calibration procedure for wind and bearing resistance High resolution positional encoder Variable pendulum velocity up to 3 8 m s Hammer energies up to 50 Joules Results in KJ M and KJ M Izod Charpy Tension Component Pipe and Puncture testing Electronic levelling device Safety guard Solenoid pendulum release with audible pre warning Tabular and graphical statistical analysis Techni Test PC software Product User Manual CE declaration certificate Traceable Calibration Certificate 1 year return to base warranty OPTIONAL ANCILLARIES WEIGHTS DIMENSIONS RR IMT Izod Vice Charpy Rest Tension Impact Rest Specimen in bed method Puncture Impact Fixture Pipe Rest Component fixture to customer requirements Variable weight impact hammers up to 50 Joules Thermal printer Full safety enclosure Low temperature chamber Net Weight
44. aluation to international testing methods such as 1506603 1503127 and ASTM 02444 to name a few Utilising both pneumatic and electrical functions the apparatus is extremely versatile The standard machine is supplied with a 2 meter variable drop height system which can reach impact velocities up to 6 26 m s With an impact energy range of up to 314 joules even the toughest of materials can easily be tested Built with operator safety in mind the apparatus has a full electrical interlock system preventing operation of the apparatus if a safety guard is open It is supplied as standard with a solenoid operated carrier release mechanism for simple operation and a unique pneumatic carrier return system to ensure the carrier is safely returned to its set drop height for FALLING WEIGHT IMPACT TESTER the next test to be performed SAMPLE amp COMPONENT TESTING RAY RAN A twin guide rail system is used to ensure a smooth repetitive drop of the load carrier perpendicularto the sample being tested Load carriers are available for different energy ranges and are fitted with low friction bearing guides which prevent velocity and potential energy being lost as the carrier descends Impact tups are supplied to international test standard methods or to customers own individual requirements which can simulate the mode of failure in actual service conditions or to analyse specific in house quality control standards
45. ange 50 C 160 C in 5 C increments Electrical characteristics 100 240 VAC 50 60 Hz LCD backlit display 50 extra sample pans included as standard CE CSA UL and FCC approved Sample Pan Handler not supplied with MB23 OPTIONAL ANCILLARIES Security Locking Cable Security Lock Temperature Calibration Kit 50g M1 Calibration Weight Sample Pans 80 Box Glass Fibre Pads 200 Box Reusable Sample Pan 3 Box Sample Pan Handler MB23 only Thermal Printer EU Thermal Cable A 4 Software WEIGHTS amp DIMENSIONS MODEL MB25 Net eight 4 ADVANCED MOISTURE ANALYSER RR MB35 TECHNICAL SPECIFICATION e Weighing Capacity 35g e Repeatability Std Dev g 0 10 for 39 sample 0 03 for 10g sample Readability 0 01 0 0019 Moisture Range 0 01 100 RS232 Interface Timer 1 120 minutes 30 second increments to 60 minutes 1 min increments from 60 120 min Infrared Halogen Heating Temperature range 50 C 160 C in 5 C increments Electrical characteristics 100 120 VAC 50 60 Hz or 220 240 VAC 50 60 Hz LCD backlit display 128 x 64 pixel Displays moisture time temperature and weight 1 off re usable Stainless Steel sample pan included as standard CE CSA UL and FCC approved OPTIONAL ANCILLARIES Sample Pan Handler Security Cable Temperature Calibration Kit 20g ASTM Class 1 Calibration Weight Sample Pans 80 Box Glass Fibre Pads 100 Box Reusabl
46. are variable from 1 5 m s up to 3 8 m s and combined with highly accurate variable weight hammers which are electronically released by a solenoid impact energy ranges up to 50 Joules can be reached To calculate the impact energy the apparatus uses advanced and highly accurate rotary encoder technology to record the lost angle of the hammer after impacting a test sample against the angle recorded after calibrating the hammer The resulting lost angle is calculated as the test sample s impact energy by the advanced microprocessor system The large on board liquid crystal display LCD provides simple on screen instruction and using the alpha numeric membrane keypad test parameters such as user names material reference numbers and batch numbers are entered and stored in operator lists for future recall and results presentation Selecting the type of test is done at the press ofa button and the testing parameters such as impact hammer weight impact velocity and sample size are entered to give the required testing conditions At start of each batch of tests a simple calibration of the apparatus is conducted for bearing resistance and windage and after each test sample has been tested the results are displayed on the LCD giving the Impact energy in KJ M and KJ M Batch statistics of mean standard deviation and co efficient of variation are automatically updated after each test and results are shown in graphic
47. at giving accurate flow curve analysis of the material under is CSV and can 1 test and by placing the cursor over each point the MFI be opened with value can be read on the screen For Internal Quality Microsoft Excel Control Procedures at a glance high and low limits are clearly displayed on the graph showing instantly if the material is a pass or fail Multiple tests are clearly visible on the graph for results comparison within the batch and are highlighted in different colours for viewing RAY RAN Qui OF VON TEST MERS EN Q o ex sov 12 FAN NAN N L NE S SAN ats y SEN ot NONSW yon NUS x r A eos aN lt PRE lt I NS MOISTURE ANALYSERS RAW MATERIAL EVALUATION RAY RAN BASIC MOISTURE ANALYSERS MB23 AND MB25 Speed and Simplicity with Affordability The MB23 and MB25 Basic Moisture Analysers combine a high quality and durable ABS construction into a sleek compact design and offer dependable accurate results to quickly effectively and affordably measure moisture content for a wide variety of applications Accurate results are provided on the custom built backlit screen at either 0 01g or 0 0059 readability depending on the model and come with heating elements of either infrared in the MB23 or halogen in the MB25 for moisture determination between 50 and 160 Each Moisture analyseris idealfortextil
48. be designed and manufactured by Ray Ran to meet customer s requirements The is supplied with Flashcut CNC software which is a dedicated real time CNC program for use on a PC or Laptop It interfaces effortlessly with the machine and uses industry standard numerical control G Code and Letter addresses for programming Pre written CNC programs are available direct from Ray Ran for any shape or size of test sample or to any International test standard 29 SAMPLE PROFILE CUTTER RR CNC1 TECHNICAL SPECIFICATION 300mm x 250mm x 100mm XYZ axis approximate 500 mm x 440 mm table size High Quality 0 5KW Router Spindle Variable spindle speeds from 2400 rpm to 24000 rpm High quality guide rail and lead screw system Positional homing switches Total enclosure safety cabinet for user protection Internal lighting Emergency Stop Button Computer interface with cabling and Windows Flashcut CNC PC software Low cost CNC programs available to any International test standard 220 240 volts 1 ph 50 Hz Uses industry standard G amp M codes Product user manual CE declaration certificate 1 year return to base warranty OPTIONAL ANCILLARIES Tooling and clamping kit Pipe clamping fixture Single flute tungsten carbide milling cutters Pre written CNC programs Dust extraction 1 0 spindle expansion board Auto tool change system amp tool rack CAD CAM software WEIGHTS amp DIMENSIONS RR CNC1 Net Weight w R
49. by Weighing 17 units custom units Parts Counting weighing Animal Dynamic Weighing Check weighing Filling Totalization Formulation Differential weighing Density determination Peak hold Ingredient costing Pipette adjustment Gross Net Tare Weighing The Explorer can be supplied with OIML approval 13 EXPLORER WEIGHING BALANCE TECHNICAL SPECIFICATION Weighing Capacity 1200 up to 102000 Repeatability 9 0 0001 up to 0 1 Readability 0 0 0001 up to 0 1 Auto Calibration RS232 Interface amp USB Display Size 5 7 in 145 mm diagonal Display Full colour VGA graphic display 4 wire resistive touch screen Electrical characteristics AC Adapter Input 100 240 VAC 0 6A 50 60 Hz CE CSA UL and FCC approved e 18 selectable units of measurement non OIML approved OPTIONAL ANCILLARIES e Thermal Printer e Impact Printer e Printer Cable e Ethernet Interface Connector WEIGHTS amp DIMENSIONS EXPLORER Net Weight kg __ Ny DISCOVERY WEIGHING BALANCE TECHNICAL SPECIFICATION Analytical Weighing Capacity up to 110g up to 3100 Analytical Repeatability 0 0001 Analytical Readability 0 0001 Semi Micro Weighing Capacity up to 810 up to 2100 Semi Micro Repeatability g 0 00001 0 0001 Semi Micro Readability 0 0 00001 0 0001 Auto Calibration RS232 Interface with full GLP GMP Protocol Display Size 4x 1 10x 2 5 2 line Alphanumeric Backlit LCD Display External Adapter
50. connector Ethernet Interface connector for LAN Networking Self calibration procedure Photo electric cell technology Variable drop height adjustment as standard 660mm 1500mm Pneumatic clamping system Constant sample tension for repeatability Solenoid actuated dart release mechanism with audible pre warning Dart return shoot 38 1mm 1 2 and 50 8mm 2 spherical darts as standard Binary weight set supplied as standard Electrical interlock safety guard Tabular and graphical statistical analysis Techni Test PC software Product User Manual CE declaration certificate Traceable Calibration Certificate 1 year return to base warranty WEIGHTS DIMENSIONS RR FDT A Net Weight kg RAY RAN SAMPLE 8 COMPONENT TESTING TECHNI TEST MAKES A STRONG IMPACT UT permet ami Techni Test is the easy to use impact software package supplied as Tester standard with the Advanced Falling Dart Impact Tester which allows user defined test data and test results to automatically download from the apparatus for results presentation and data reporting Test data downloaded to Techni Test includes operator batch reference test type impact velocity hammer weight and impact energy material reference From the results graph each impact test value is clearly identified giving accurate data analysis of the material under test The graphical impact results can be displayed in KJ M or KJ M by si
51. croprocessor s temperature control function 68 ensures the ramping rates of either 50 C h or 120 C h are kept within the specified test standard requirements as well as performing non standard ramp rates to customers own specific needs Each test station is fitted with a PT100 platinum resistance thermometer which accurately records the temperature next to the sample under test to 01 and an electronic displacement transducer which measures the sample SAMPLE COMPONENT TESTING displacement to 0 01mm as standard or to 0 001mm as an option The integrated power raise and lower function of the test stations ensures safe easy access to the test sample supports for sample loading and retrieval before and after each test For maximum temperature stability across each of the test stations the apparatus is fitted with a dual pump oil stirrer system Test temperatures of 300 C are easily achieved and to ensure optimum safety at higher temperatures the Nitrogen Blanket option is recommended The apparatus is supplied as standard with an integrated solenoid operated cooling system which is automatically activated after each test It can be connected to either a standard water supply or to the optional chiller unit for improved heat reduction The integrated cooling coil ensures rapid heat loss back to start temperature conditions within a short time period increasing production The one touch self calibration feature oft
52. ct user manual CE declaration certificate 1 year return to base warranty OPTIONAL ANCILLARIES e Jest sample cutters to any International standard e Traceable calibration certificate cutters only e Polypropylene cutting board gt N gt A 4 WEIGHTS amp DIMENSIONS RR HCP 1 yA sw AA ER gx Kr ae WAP PNEUMATIC CUTTING PRESS RR PCP TECHNICAL SPECIFICATION Pneumatically operated up to 10 bar 150 psi Automatically operated Polycarbonate guard Cutting force up to 50KN 25cm x 15cm sample platform Polypropylene cutting board Adjustable cutting arbor with locking handle Suitable for rubber plastic paper fabric or laminates Product user manual CE declaration certificate 1 year return to base warranty OPTIONAL ANCILLARIES e Testsample cutters to any International standard e Traceable calibration certificate cutters only Polypropylene cutting board WEIGHTS 8 DIMENSIONS RR PCP Net Weight kg Width cm Depth cm RAY RAN TEST SAMPLE PREPARATION PNEUMATICALLY OPERATED TEST SAMPLE CUTTING PRESS The Pneumatically Operated Test Sample Cutting Press is by far the most effortless and safest way to produce cut samples from materials such as plastics fabrics boards and paper The press is robust and compact using a limited amount of space and is ideal for any laboratory or workshop without the need to be bolted to a bench or worktop The
53. ctor to optional dedicated PC software or thermal printer OTHER FEATURES M INCLUDE User selectable environmental settings stability indicator mechanical and software overload underload protection AC adapter user selectable span calibration points auto tare user selectable printing options user selectable communications settings user selectable data print options user definable project and user ID s software reset menu software lockout menu and integral weigh below hook The Adventurer Pro is an essential cost effective tool for Laboratory and Quality Control environments ADVENTURER PRO DENSITY BALANCE TECHNICAL SPECIFICATION Weighing Capacity up to 2600 Repeatability g 0 0001 Readability 9 0 0001 2 Line Liquid Crystal Display LCD with Backlight RS232 with GLP GMP Data Ouput Rigid Metal ABS construction Glass draft shield with flip top door AC adapter included Multiple Application Modes Selectable Environmental Settings OPTIONAL ANCILLARIES e Thermal Printer Impact Printer Printer Cable Computer software Internal Self Calibration as WEIGHTS DIMENSIONS ADVENTURER PRO Net Weight ___ __ wh gt Jp EXPLORER PRO DENSITY BALANCE TECHNICAL SPECIFICATION Weighing Capacity up to 3200 Repeatability 9 0 0001 Readability 9 0 0001 Auto Calibration RS232 Interface amp USB Display Size 5 7 in 145 mm diagonal Display Full colour VGA
54. ctured by Ray Ran the Model 1 CNC Sample Profile Cutter is rapidly becoming the best bench top milling machine in its class The 3 axis rapid prototyping vertical milling machine Is ideal for cutting hard dense polymer sheets and laminates up to 40mm thick as well as polyethylene and polypropylene pipes that are used within the gas and water industry The versatility of the machine makes it ideal for Research and Development departments Laboratories and Universities The CNC1 comes with a bed size of 500mm x 440mm which has tennon slots for clamping down the sample Travel distances on the X Y and 2 axis are 300mm x 250mm x 100mm respectively and are fitted with high quality lead screws and linear guide rails for precision and accuracy The high speed spindle is variable from 2400 rpm to 24000 rpm and has a milling cutter capacity of up to 10mm diameter Cutting feed ranges up to 1100mm min can be achieved for a fast accurate milling process with each axis driven and controlled by advanced stepper motor technology Pipe work is supplied as standard for air cooling to reduce the cutter temperature when machining components and the machine can also be fitted with dust extraction The fully enclosed cabinet has an internal light and an electrical safety interlock to ensure operator safety when the cabinet door is in the open position RAY RAN For work holding a standard clamping kit can be supplied or bespoke clamping fixtures can
55. e Full Range of Test Weights Available from 1Kg to 21 6Kg Width cm Dept em s Height cm WEIGHTS amp DIMENSIONS MODEL 6MPCA Net Weight kg Please note that shipping weights will increase if heavy test weights are included For a complete set of test weights add approximately 30 kg to the weight RAY RAN RAW MATERIAL EVALUATION Model 6 Advanced Microprocessor Controlled Melt Flow System with Techni Test software The 6MPCA is the most advanced model offered within the Ray Ran Range of Melt Flow Indexers The operating procedure is very simple to undertake using its on board advanced microprocessor technology The large liquid crystal display LCD provides simple on screen instructions reducing user error and the test parameters are easily entered via the alpha numeric membrane keypad The apparatus can accurately determine results for MFR MVR and Density at test temperature To conduct a test molten polymer is extruded through a closely controlled orifice die from the apparatus using user set test parameters of temperature and pressure produced by a dead weight system Rotary encoder technology accurately determines piston displacement as the polymer is extruded and automatically starts the test when the piston is in the critical zone for testing Simple parameters are entered such as user names material reference numbers and batch numbers which are stored in lists forfuture recall and result
56. e Sample Pan 3 Box Printer SF42 EU Printer SF42 GB Printer Cable Computer software WEIGHTS 8 DIMENSIONS MODEL MB35 Net Weight kg Depth cm wth em TTT Height cm RAY RAN RAW MATERIAL EVALUATION MB35 ADVANCED MOISTURE ANALYSER Designed to quickly effectively and affordably measure The MB35 features a maximum sample capacity of 359 moisture content the MB35 is the Mid range with a readability of 0 001g and repeatability to 0 03 10g sample The Intuitive software of the MB35 uses a simple Advanced model offered within the Ray Ran range of Moisture Analysers Infrared Halogen heating with 2 y L adds testing procedure Accurate results are provided on the large 128 x 64 pixel backlit LCD screen at the end of the test as 06 moisture actual weight g actual temperature and test precision weighing technology gives a fast and accurate method for moisture content determination The 35 is perfect for applications in the pharmaceutical time and can be printed to an optional thermal printer via chemical and research industries and is versatile and the onboard RS232 serial interface or connected to a PC for rugged enough for continuous operation in food and use with optional dedicated software beverage quality control environmental and many The MB35 Moisture Analyser is supplied as standard with other applications Infrared halogen heating technology which begins the sample drying p
57. e column increases uniformly from top to bottom samples into the column simply reverse the sweep motor and Calibrated glass marker floats of precise known lower them into the column densities are introduced into the column and sink to a point where the density matches that of the solution The Gradient of the column can be calibrated amp checked at any time as the calibration procedure stores the values in the microprocessor A linear encoder which is ensuring that density values of attached to a trammel guide is used to calibrate the gradient the column If the density gradient of the column by focusing the of the column changes at any your samples remain to A optical microscope onto the l centre of the calibrated float and entering the floats density value into the microprocessor time the column can be quickly re calibrated saving time or the necessity to create a new gradient for the column Depending on use the density distribution the column can remain stable for Once test samples have been ki introduced into the column and have reached a point of static n up to 40 weeks equilibrium they are accurately sighted using the microscope The resultant density of the sample isobtained and displayed on the LCD without the need for complicated graphs Test results can be downloaded via the RS232 serial interface connector to an optional thermal printer To remov
58. e the samples and glass marker floats simply turn on the automatic sweep mechanism and wait for the items to be extracted from each column Particles and floats are removed at a slow speed so the gradient of each column is not 3 COLUMN DGA 8 6 COLUMN DGA RR DGA TECHNICAL SPECIFICATION Automatic density calculation Automatic calibration system LCD display Resolution 0 0001 g ml Accuracy 0 0001 g ml Backlight Variable speed pumped filling system Twin conical filling flasks Automatic magnetic stirrer Automatic sweep mechanism Stainless steel sweep baskets 7x optical microscope Digital temperature control to 0 1 C RS232 output Cooling coil 110v 60hz and 240v 50Hz Product user manual Traceable calibration certificate CE declaration certificate 1 year return to base warranty Conforms to 1501183 amp ASTM D1505 OPTIONAL ANCILLARIES Thermal Printer e Water chiller unit e Glass marker floats 0 7g ml up to 2 2g ml Microprocessor controlled filling system WEIGHTS DIMENSIONS AUTO DENSITY GRADIENT APPARATUS 3COLUMNDGA 6COLUMNDGA wa o o e DGA FILLING SYSTEM RR DGA CFS TECHNICAL SPECIFICATION WEIGHTS 8 DIMENSIONS RR DGA CFS Net Weight kg Width cm Small footprint filler unit with basic operating panel LCD display Fully programmable column volume and upper and lower densities More accurate and consistent than other filling methods Variable speed pumped
59. edures THE STANDARD FEATURES OF THE CT AND AT MACHINES INCLUDE e Fully digital testing system with high precision control and accuracy includes automated computer control of test methods giving simplicity of operation e High resolution auto ranging load cells with accuracies better than 0 5 down to 1 1000th of the load cell capacity e Automatic recognition and calibration of load cells and extensometers with instant calibration check facility e 80090 overload capability of load cells without damage e Small footprint design giving economy of bench and floor space e High efficiency pre loaded self cleaning ball screws SAMPLE amp COMPONENT TESTING for fast quiet testing Fitted with sealed for life lubricated end bearings Crosshead guidance system providing precise alignment and smooth running Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free A P m operation and 4 000 000 steps per revolution positional control High speed data collection systems for up to 4 synchronous channels 6 I O channels for additional devices such as extensometers micrometers callipers balances etc High stiffness loading frames with solid specialised steel crossheads and rigid extruded support columns with T slots for accessory mounting Overload over travel and impact protection Telescopic covers giving additional protection for ball
60. ely determines the density of fluids and the specific gravity of solid materials by using the Archimedean Buoyancy Method To conduct a test the sample is first weighed in air and again when submerged in a liquid By determining the loss in weight which is directly proportional to the mass of the fluid it has displaced the specific gravity and density is readily calculated Test results can be downloaded via the onboard RS232 serial interface connector direct to Excel or to an optional thermal printer OTHER FEATURES INCLUDE Owerty keyboard and numeric keypad 14 built in applications fully automatic internal calibration system fast stabilization time four touchless sensors up to 11 operating languages NTEP and OIML models available menu lock switch security bracket integral weigh below hook for below balance weighing applications removable stainless steel weighing platform stability indicator overload and underload indicators auto standby AS The Explorer Pro is an essential cost effective ae N tool for Laboratory and Quality Control environments RAW MATERIAL EVALUATION RAY RAN DISCOVERY PRO DENSITY DETERMINATION BALANCE The Discovery Pro Density Determination Balance is the professional s choice when it comes to measuring density The Discovery Pro features a rigid construction and an advanced internal calibration system offering the perf
61. em has been designed to accept industry standard G amp M codes ensuring full compatibility with leading professional Computer Aided Design and Computer Aided Manufacturing software CAD CAM For the experienced user of Computer Aided Design software such as AutoCad simple 2D drawings can be imported into the software as DXF files using the Flashcut CNC s Import feature Once simple set up parameters are configured the software will generate a simple G Code program to machine the part If you have CAM software programs generated by your Post Processor can also be imported as FGC files direct to the Flashcut software the program will then generate the cutter path in the viewports on the main control panel For the novice pre written CNC programs are also available direct from Ray Ran for any shape or size of test sample to any International test standard eliminating the need for CAD CAM trained operators or skilled CNC programmers e Main screen display units english metric 6 Easy to use main screen and control panel e Configuration wizard e All G Code and M Code variables catered for Program list box e Advanced contouring e G Code teach box G code program editor e Multi screen viewports Feedrate override selector e DXFimport MIN PC REQUIREMENT Step and continuous run modes e Tool path generator 1 GHz or faster processor 6 1 GB of RAM e Windows XP Vista or 7 either 32 or 64 bit e Atleast 1 available USB port RAY RAN
62. eneration capability that can include long term statistics and control charts for all specified calculations WinTest Reports can also be configured to display headings titles company logos graphs charts pop up menus and specific technical information LL lt lt in PRECISION SAMPLE amp COMPONENT TESTING PRECISION THICKNESS GAUGE RR PTG PRECISION THICKNESS GAUGE The range of Precision Thickness Gauge s available from Ray Ran have been specifically designed to quickly and accurately measure the thickness of a variety of materials including film paper board foil tissue and textiles Operated via an intuitive touch screen interface the instrument will allow the user to define batch size dwell time amp measuring speed simply and efficiently The instrument is operated via an integral colour touch screen display and features different measurement modes and user defined runtime routines which ensure total hands free operation during the test procedure Physical test parameters can be factory configured according to international test standards or customer requirements Test measurement speed and dwell time are controlled by user define parameters The instrument is linearised throughout its measurement range using a multi point calibration system and the flatness of the measurement head anvil is O 1um with typical parallelism of lt 1um Measurements made using the FT
63. es e Twin guide rail system Electrical safety interlock e Low friction carrier bearing e 110or240 volt available system Operating pressure 100 PSI Solenoid release mechanism 7 bar e Pneumatic carrier return e Conforms to 1506603 1503127 e Mechanical raise lower fixture and ASTM D2444 etc platform e Product user manual Pipe sheet Izod Charpy e E declaration certificate Tension Component testing e Traceable calibration certificate compatible e 1yearreturn to base warranty e Variable velocity up to 6 26 m s OPTIONAL ANCILLARIES e Extended drop height e Drop Height Power Feed e Increased chamber capacity Adjustment e V rest pipe fixture 2mm e Digital Height Scale 75mm dia e Velocity indicator e V rest pipe fixture75mm 9 Drop weight carriers from 400mm dia 0 5kg 16kg as standard e Plate or Plaque specimen Customized drop weight carrier holder manual clamp e Impact Heads to e Plate or Plaque specimen International test standards holder Pneumatic clamp e Customized Impact Heads e 704 Fixture Tups e Charpy Fixture e Variable weight system e Customized Fixtures Low Temperature Chamber e Anti rebound device WEIGHTS 8 DIMENSIONS V i 78 ME A e 4 As 6 A 7 D a i 4 RAY RAN FALLING WEIGHT IMPACT TESTER RR FWT AVAILABLE OPTIONS ANTI REBOUND The apparatus can be supplied with an electrically
64. es wastewater ceramics food and other applications Setup and operation is extremely easy Simply press and hold the temperature or time buttons to set manual automatic or timed duration drying parameters add your sample and begin the test process Results are displayed on the LCD at the end of the test as 96 moisture or 96 solids or weight g temperature and time and can be printed to an optional thermal printer via the onboard RS232 serial interface connection This makes the MB23 and MB25 ideal for routine Quality Control tasks performed by operators of all skill levels Both the MB23 and MB25 moisture Analysers have a compact footprint of only 17 x 13 18cm and have both been designed to take up less space and their easy to clean heating chamber is operator friendly for routine inexpensive maintenance Both the MB23 and MB25 come with a 90mm diameter sample pan and have a 110g weighing capacity BASIC MOISTURE ANALYSER RR MB23 25 TECHNICAL SPECIFICATION MB23 MB25 MB23 Repeatability Std Dev g e MB25 Repeatability Std Dev g 0 396 for 3g sample 0 296 for 10g 0 296 for 3g sample 0 0596 for sample 10g sample e 23 Readability 0 1 0 019 e MB25 Readability 0 05 0 0050 e MB23 Infrared Heating e MB25 Halogen Heating STANDARD ON BOTH Weighing Capacity 110g Sample size 3g to 20g typical 0 5g minimum RS232 Interface Timer 1 99 minutes 30 second increments to 60 minutes Temperature r
65. es to ASTM 01709 methods A amp B 1507765 IMPACT TESTER Variable drop height adjustment as standard 660mm 1500mm Pneumatic clamping system Constant sample tension for repeatability The Ray Ran Manually Operated Falling Dart Impact Tester provides a basic method for from falling and rebounding darts determining the energy that causes thin flexible Solenoid actuated dart release mechanism with audible pre warning Dart return shoot 38 1mm 1 2 and 50 8mm 2 spherical darts as standard Binary weight set supplied as standard Electrical interlock safety guard Product User Manual CE declaration certificate Traceable Calibration Certificate 1 year return to base warranty supplied to ensure the operators safety If the test specimen is broken during a test the dart will fall into the return shoot for easy dart retrieval The walls materials such as plastic film paper and composite sheets to fail under specified conditions of impact E A from a free falling dart The energy required to tear of the shoot are perforated to exhaust or puncture the test specimen is expressed in terms air pressure which might arise inside dG ss m the shoot when the test piece deforms Rubber buffers at the bottom of the shoot prevent the dart from getting damaged when it has passed through sample of the darts weight which would result in the failure of 50 of specimens bein
66. esigned to cut test samples such as tensile bars from relatively flexible sheet the Ray Ran Hand Operated Test Sample Cutting Press will produce samples from plastics fabrics boards and paper In most cases the thickness of the material that can be cut will not just depend on the strength of the material but also on the lateral flexibility of the material to allow the cutter to penetrate down into and pass through the material The press is supplied with a cutting base of 30cm x 15cm and a polypropylene cutting board to support the material the sample isto be cut from Four fixing holes in the base plate enable the press to be securely fastened to a rigid bench or worktop to obtain the optimum cutting load To ensure maximum performance the cutter must be set up relative to the cutting board so that at full stroke the cutter will just depress the surface of the cutting board The fixing arbour on the press will accept a 25mm dia cutting tool shank as standard Other size fixing arbours can be supplied to customer requirements The Ray Ran Hand Operated Cutting Press can generate a cutting force of up to 6KN depending on the strength of the operator 35 HAND CUTTING PRESS RR HCP TECHNICAL SPECIFICATION Hand operated 30cm x 15cm sample platform Cutting force up to 6KN Polypropylene cutting board Adjustable cutting arbor with locking handle Suitable for rubber plastic paper fabric or laminates Produ
67. ess can then be cleaned at the operator s convenience moulding process usingadedicated cleaning solution or ultrasonic cleaning bath The 47cm capacity of the cylinder liner ensures multiple moulds can be made saving time and reducing valuable material wastage To mould a test sample polymer is loaded into the top ofthe linerwhich is heated to the required temperature to plasticise the polymer When the injection piston is released the cylinder liner nozzle automatically locks into the INJECTION MOULDING RR TSMA TECHNICAL SPECIFICATION Pneumatically operated Maximum air line pressure 150 psi 10 bar Maximum polymer pressure 6500 psi 450 bar Maximum shot size 47cm Maximum sample sizes 175mm L x 45 W x 12 7 T Digital Temperature Control Automatic nozzle to tool locking device Cam lock Tool Block Quick Change Cylinder Nozzle amp Die Visual alarms for tool locking 110v 607 and 240v 50Hz Product user manual Traceable calibration certificate CE declaration certificate 1 year return to base warranty OPTIONAL ANCILLARIES Polymer Feeder Hopper Low cost moulding inserts available to all international standards e Quick Change Cylinder Nozzle amp Die e Aircompressor e Non standard tool block WEIGHTS 8 DIMENSIONS RR TSMA Net eight ka __ e 535544 DNI LL Y2 d ldINVS 1531 TEST SAMPLE PREPARATION RAY RAN HAND OPERATED TEST SAMPLE CUTTING PRESS Specifically d
68. est Weights e Heat Transfer Medium 5115 1 set required per station Nitrogen Blanket e 1 00Kg Vicat Test Weight e Airto Nitrogen Extractor 1 required per station Water Chiller unit e 5 00Kg Vicat Test Weight 1 required per station WEIGHTS 8 DIMENSIONS SOFTENING POINT APPARATUS HDV6 HDT VICAT Width c oT RAY RAN SAMPLE 8 COMPONENT TESTING ADVANCED 6 STATION HDT VICAT SOFTENING POINT APPARATUS For maximum testing capability look no further than the Ray Ran Advanced 6 Station HDT Vicat Apparatus Built for multiple simultaneous testing of 6 samples to HDT or Vicat testing methods the apparatus uses dedicated microprocessor technology to accurately determine the deflection and softening point characteristics of all thermo plastic test specimens Its operator simplicity and high accuracy makes the apparatus ideal for product development and quality control and has been designed to meet multiple International Testing Standards On start up the advanced on board microprocessor starts work immediately by conducting a self diagnostic procedure to ensure test result accuracy and reliability The built in liquid crystal display LCD provides simple on screen instructions and test parameters are easily selected using the onboard membrane keypad A simple data selection process using yes no prompts make the setup and operating procedure very simple to undertake and reduces user error and operator training The mi
69. et 2 1 000000 gf Ors aspects of the Melt Flow System during the test procedure Toensure reliable data analysis and mt sete Trete T results presentation test results im L are downloaded in graphical and J L 050716 tabularformat Each tabular result TAI E Evo ments and Senasis I m J 7 B orams GD imis displays Extrusion Time MFI MVR See AM Shear Rate Viscosity and Apparent IV Intrinsic Viscosity In Test Results Viewer mode users have the ability to upload which is automatically calculated by the Techni Test saved results from previous tests for Material Comparison Data Software without the need for specialised equipment Manipulation or File Export Abnormal results caused by air Batch statistics such as Mean and Co efficient of Variation pockets within the molten material for example are clearly COV are also displayed and are updated after each test identifed and can be removed from the test data bringing result is downloaded Test reports can be printed from the batch statistics into a normal range ensuring that the test the main screen when each test has been completed procedure does not have to be repeated saving time and material Exporting the results file in Viewer Mode is simple The From the graph each multi slice point is clearly identified Export file form
70. fined test regions e Comments field and custom columns available for each test series and for individual tests e User friendly test data backup can be configured for periodic reminders e Free backup archive viewer program available REPORT FEATURES INCLUDE e Fully configurable test reports e User defined header and footer on test reports Generate test reports in PDF format for email etc Auto print and preview option Report transfer into Microsoft Excel and Microsoft Word Import and export of test definitions in XML format Export test results in ASCII format Export raw curve data GRAPH FEATURES INCLUDE Pass Fail tolerance bands Display of best fit straight line in the elastic region for calculation of E modulus proof stress etc Golden sample a test curve can be selected as a reference and tolerance bands can be set to provide an instant visual check that all subsequent tests are within tolerance Event marking during real time plotting of test curve Visual display of calculations User defined annotations Built in drawing function Visual event markers User defined peaks and troughs Show the current graph co ordinates for the current mouse position 91 UNIVERSAL TESTING MACHINES WINTEST ANALYSIS WINTEST REPORTS WinTest Reports is an enhancement to WinTest Analysis to add flexibility to data analysis and statistical reporting The package provides a report g
71. ftware for connection to the apparatus via an RS232 or Ethernet connection Test results can be printed directly from the Techni Test software or can be saved and exported as CSV files which can be opened with Microsoft Excel in tabular form which can be manipulated to your specific requirements such as preparing a graphical presentation or copying the results to a Word document for a report presentation if required For quality control purposes High and Low limits can be defined when test results are downloaded showing the user instantly if the material is a pass or fail If the apparatus is connected to the PC via the Ethernet connector over LAN network then the RS232 be used for connection to an optional thermal printer for direct printout by the operator ADVANCED UNIVERSAL PENDULUM IMPACT TESTER TECHNI TEST SOFTWARE RAY RAN TECHNI TEST MAKES ASTRONG IMPACT rs Tene Oire View Techni Test is the easy to use Impact Tester software package supplied as standard with the Advanced Universal Pendulum Impact Tester which allows user defined test data and test results to automatically download from the apparatus for results presentation and data reporting vv Mr Ars kima Die ren tan aa x mm wre iyos includes operator material reference batch reference test type impact velocity hammer weight and impact energy From the results graph each impact tes
72. g tested The instrument complies with the ASTM D1709 Method A amp Band ISO 7765 The methods of holding the test specimen and releasing the dart are designed so that they may be accurately repeated for each test performed The apparatus comes supplied with 2 off digital counters break and non break which are located on the front control panel m Test specimens simply clamped in the unique two piece pneumatic clamp system which gives a constant tension across the surface area of the specimen ensuring test to keep track on the type of repeatability A dart of a known weight is then allowed to free fall and hit the sample To comply with the relevant test standards dart drop heights of either 660mm or 1500mm are easily obtained using the built in telescopic height adjustment assembly The dart release mechanism is solenoid actuated and requires the use of both hands to release the dart to ensure optimum operator safety A fully electrical interlocked guard is also impact failure of the sample and the total number of tests conducted Also supplied as standard are 38 1mm and 50 8mm spherical radius darts WEIGHTS 4 DIMENSIONS RR FDT M Net weight Ra of binary weights 49 F E ura EL k SAMPLE 8 COMPONENT TESTING ADVANCED FALLING DART IMPACT TESTER RR FDT A AY RAN ADVANCED FALLING DART IMPACT TESTER Utilizing on board micro
73. ge instrument also available Output RS232 STANDARD INSTRUMENT e Power 110V 220V 50Hz 60Hz With fixed pressure factory configured to meet a single test standard i ES T or specification of your choice Can be extended to optional 19mm Metric or imperial units measuring range e Easy to use touch screen integrated software e Flatness of measurement head anvil lt 0 typical parallelism lt 1um UKAS traceable calibration certificate 2000 and 500 um calibrated check gauge FT3 V VARIABLE INSTRUMENT e E declaration certificate Test pressure is varied by adding additional weights to the instrument platform 1 e 1 year return to base warranty Factory configured measurement head size One external weight is included to dependant on model achieve compliance to a second measurement standard or assess OPTIONAL ANCILLARIES material compressibility Additional external weights can be e Results printer applied to increase measurement pressure up to 4kg total 51 222 Can be extended to optional 19mm measuring range FT3 U ULTRA HIGH PRECISION INSTRUMENT a Fixed pressure configured to meet a single test standard or 6 N e A 7 WEIGHTS 8 DIMENSIONS RR PTG mass between 50g and 500g available Measurement Head 25 5mm NetWeight k 10 radius domed Custom radius domed heads available on request Widih em C3 gt Depthiem gt a 2 7 A Ar
74. ght Sample notched sensor GB T 11999 ISO 6383 2 JIS K e Interchangeable jaw faces 7128 2 54 141 E Kit only e Nonwovens ASTM D 5734 Another major feature of the apparatus is the quick and easy e Visual and audible limits WSP 100 1 specimen clamping fixture which uses innovative rotary cam warnings locking jaws and the built in automatic pendulum weight OPTIONAL ANCILLARIES detection system with automatic zeroing which further reduces operator error During the test procedure the operation of Elmendorf Tear Tester is intrinsically safe The electrical interlock system requires both hands to release the pendulum and after a test has been conducted the pendulum is automatically arrested Test results are displayed automatically after each test ensuring no complicated calculations have to be made Statistical analysis is possible without the need of PC software package Vin 6 WEIGHTS 8 DIMENSIONS AS IE E RR y p yo nnm 4 m r MP 4 d Se 4 Pendulum Weight Kit E 128N with A 3 faces A i RR ETT ot a ONI3JOV IVINd3H L SAMPLE amp COMPONENT TESTING RAY RAN THERMAL AGEING APPARATUS The 6 Cell Thermal Ageing Apparatus has been designed by Ray Ran to study the thermal endurance characteristics of polymer materials and their ageing process by passing a constant f
75. he apparatus ensures that the machine and test results remain accurate A unique calibration interface unit is supplied with each machine that is simply connected to the apparatus for you to carry out the calibration procedure The apparatus is supplied as standard with advanced data logging software which connects via the RS232 serial interface connector The software records the temperature deflection profile of each station in real time during a test Test results are displayed in tabular format and reports can easily be generated by the software for results presentation If required test results can also be saved as CSV files which can be opened with Microsoft Excel for data manipulation further report presentation or for importing into customer specific software RAY RAN COLD FLEX TESTER SAMPLE amp COMPONENT TESTING COLD FLEX TESTER Designed and built by Ray Ran the Cold Flex Tester determines how low temperatures affect the torsional stiffness properties of flexible materials including polyvinyl chloride extrusion compounds by measuring the temperature at which a test specimen is twisted through a known angular displacement using a pulley system by a specified torque The apparatus complies with BS2782 Part 1 Method 1048 ISO458 1 458 2 and ASTM D1043 International Test Standards The apparatus consists of a low temperature bath with electronic PID temperature controller heater and a PT
76. hich can be exported into other user programs for generating test reports The apparatus can also be supplied with an optional thermal printer for easy results printout ifthe machine is not connected to a network or PC The 6MPCA Melt Flow System is supplied as standard with a replaceable hardened steel cylinder liner standard test die and piston along with 2 16 kg test load and cleaning ancillaries The apparatus has dual Zone heating technology to keep the maximum allowable temperature variation along the length of the cylinder liner in accordance with the International test standard 1501133 Optional weights can be supplied to cover all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston The weight loader can also be used as a hold back feature for materials which have a high flow rate All documentation is supplied including Techni Test Software a product user manual and a fully traceable calibration certificate 6MPCA ADVANCED MELT FLOW SYSTEM TECHNI TEST SOFTWARE RAY RAN ENTER THE WORLD OF TECHNI TEST 7 amp Flow lndexer Online View S Techni Test is an easy to use B che sun w s F q 4 Patan Elapsed Tme 2 2 software package supplied aan 423333 E with the 6MPCA which allows Oa Dye LIA 5 7 ak 000000 Os the operator to monitor all W
77. highly accurate test results The machine is offered in two models the standard and integrated AT range The CT Universal Testing Machine uses feature rich WinTest Analysis software for control and testing with comprehensive on board test methods that are compliant with all relevant industry standards including advanced standard and complex multistage test procedures which are fully configurable and controlled using a standard PC interface PC systems can be supplied or customers can utilise their own desktop computer or laptop to operate the machine The AT UniversalTesting Machineisa stand alone machine which utilises the latest integrated touch screen technology and is fitted with an integrated industrial computer module comprising 1 GHz CPU with 256MB Ram 40 GB Hard Drive with Windows XP operating LAN USB RS232 ports The AT uses the feature rich WinTest Analysis software for control and testing with comprehensive on board test methods that are compliant with all relevant industry standards including advanced standard and complex multistage test procedures 88 THE STANDARD FEATURES OF THE CT AND AT MACHINES INCLUDE e Fully digital testing system with high precision control and accuracy includes automated computer control of test methods giving simplicity of operation e High resolution auto ranging load cells with accuracies better than 0 5 down to 1 1000th of
78. icroprocessor the dynamic friction is measured twenty times during the selected travel distance The result given is the average of these twenty readings However by displaying the results graphically on a computer each of the twenty readings can be inspected to examine any variation in the test results over the selected travel distance The large on board liquid crystal display LCD provides simple on screen instruction and using the alpha numeric membrane keypad test parameters such as user names material reference numbers and batch numbers are entered and stored in operator lists for future recall and results presentation Testing parameters such as test velocity sled weight and settling time are also entered to give the required testing conditions If Temperature is important to your testing requirement then the Static and Dynamic Friction Tester can be supplied with an optional heated bed After each test has been conducted the results are displayed on the LCD giving the static and dynamic co efficient as well as the test load result in grams Batch statistics are automatically updated after each test and results are shown in graphical and tabular format for analysis when downloaded to 45 the supplied PC software For quality control purposes the Static amp Dynamic Friction Tester can be set with High and Low limits which are clearly defined when test results are downloaded showing the user instantly if the material is a pass o
79. ing conditions At start of each batch of tests a simple calibration of the apparatus is conducted Batch statistics of mean standard deviation and co efficient of variation are automatically updated after each test and results are shown in graphical and tabular format for analysis when downloaded to the supplied Techni Test PC software For quality control purposes High and Low limits can be defined when test results are downloaded showing the user instantly if the material is a pass or fail The apparatus is supplied as standard with Ray Rans Techni Test Windows based software for connection to the apparatus via an RS232 or ethernet connection Test results can be printed directly from the Techni Test software or can be saved and exported as CSV files which can be opened with Microsoft Excel in tabular form which can be manipulated to your specific requirements such as preparing a graphical presentation or copying the results to a Word document for a report presentation if required If the apparatus is connected to the PC via the ethernet connector over a LAN network then the RS232 can be used for connection to an optional thermal printer for direct printout by the operator ADVANCED FALLING DART IMPACT TESTER RR FDT A TECHNICAL SPECIFICATION Advanced dedicated microprocessor control Touch membrane Alpha Numeric keypad Easy to read liquid crystal display Sequence logic menu auto prompt selection RS232 interface
80. ipment 71 COLD FLEX TESTER RR CFT TECHNICAL SPECIFICATION Measures apparent torsional modulus of elasticity Integrated low temperature bath PID electronic temperature control Resolution 0 1 C 100 sensor accurate to 0 1 C Integrated stirrer motor Stainless steel camping mechanism Low friction bearing assembly Integrated radial dial indicator degrees Torque load weights supplied Product user manual CE declaration certificate 1 year return to base warranty 110 60Hz 240v 50Hz 10 amp Complies with BS2782 Part 1 Method 1048 IS0458 1 amp 458 2 ASTM D1043 OPTIONAL ANCILLARIES Heat transfer medium silicone oil 10 ltrs WEIGHTS 8 DIMENSIONS RR CFT Net Weight s R RAY RAN 491531 5533311149 danilvaddNail MOI SAMPLE amp COMPONENT TESTING RAY RAN LOW TEMPERATURE BRIT TLENESS APPARATUS The Ray Ran Low Temperature Brittleness Tester has been designed to study the effects low temperatures have on plastic materials when subject to impact loads and conforms to ASTM D746 and ISO R974 International Test Standards Many materials which are flexible at normal ambient temperatures become brittle at low temperatures which N severely affect the materials impact strength By plotting the percentage failure rate of the test samples against the reduction in temperature the brittleness temperature of the test samples can be determined The apparatus
81. ity 0 0196 0 0019 Moisture Range 0 01 100 0 01 100090 for regain mode e RS232 Interface e Timer 1 120 minutes 10 second increments e Infrared Halogen Heating e Temperature range 50 C 200 C in 1 C increments e Electrical characteristics 100 120 VAC 50 60 Hz or 220 240 50 60 Hz e LOD backlit display 128 x 64 pixel Displays Yo moisture Yo solids time temperature weight test I D and drying curve 1offre usable Stainless Steel sample pan included as standard CE CSA UL and FCC approved OPTIONAL ANCILLARIES Sample Pan Handler Security Cable Temperature Calibration Kit 20g ASTM Class 1 Calibration Weight Sample Pans 80 Box Glass Fibre Pads 100 Box Reusable Sample Pan 3 Box Printer SF42 EU Printer SF42 GB Printer Cable Computer Software koy g A e WEIGHTS 4 DIMENSIONS MODEL MB45 Net Weight a as wth 13 Depth A PAR jenem y X VA Li v A 9 v ai p SJONV 78 DNIHOIJA NOISIDidd 8 IVOLLATIVNV RAW MATERIAL EVALUATION PIONEER The Pioneer series of analytical and precision balances are designed for basic routine weighing in a variety of laboratory industrial and education applications With the right combination of performance and features the Pioneer offers uncomplicated performance for all your basic weighing needs and includes
82. kg Depth cm Wath cm Height cm RAY RAN SAMPLE 8 COMPONENT TESTING ADVANCED UNIVERSAL PENDULUM IMPACT TESTER TESTING METHODS AVAILABLE For the Izod test the specimen is supported and impacted in a cantilevered position with one end of the specimen clamped into the vice A single swing of the impact hammer is required to break the specimen and the subsequent impact strength calculated Notched or Un notched specimens can be tested using the Izod method Complies to International Test Standards ASTM D256 ASTM D4812 and ISO 180 Impact hammer energies are available from 0 5 J up to 25 J CHARPY TEST The Charpy test requires a standard notched or un notched test specimen to be supported as a horizontal beam and is impacted on either its narrow face or the width of its cross section A single swing of the impact hammer is required to break the specimen and the subsequent strength calculated Complies to International Test Standards ISO 179 ASTM D256 ASTM D6110 DIN 53453 DIN 53753 and BS 413 Impact hammer energies impact are available from 0 5 J up to 50 J 56 Tensile TENSION IMPACT impact tests lt conducted on material samples that are either too thin or exhibit a high elongation before fracture The test sample usually in the shape of a tensile bar is positioned in a horizontal plane with one end supported to the base of the apparatus and the other end supported by a
83. lations OTHER FEATURES INCLUDE Selectable environmental filters protective in use cover integral weigh below hook easy to use keypad up front level indicator stability indicator mechanical and software overload underload protection AC adapter user selectable span calibration points auto tare user selectable printing options user selectable communications settings user selectable data print options user definable project and user ID s software reset menu and software lockout menu 27 a a P 4 3 ALAS m e ai _ om DISCOVERY PRO DENSITY BALANCE TECHNICAL SPECIFICATION Weighing Capacity up to 3100 Repeatability g 0 00001 Readability 9 0 00001 Auto Calibration RS232 Interface with full GLP GMP Protocol Display Size 4 x 1 10 x2 5 2 line Alphanumeric Backlit LCD Display External Adapter 100 120VAC 150mA 220 240VAC 100mA 50 60Hz CE CSA UL and FCC approved OPTIONAL ANCILLARIES Thermal Printer Impact Printer Printer Cable Ethernet Interface Connector Computer Software Dust Cover Anti Theft Device A y uo c DISCOVERY PRO A me 0 WEIGHTS amp DIMENSIONS Net Weight kg Width cm Depth cm Height cm i a k 1 li m A e e gt r dd lliO0dd 3 IdWVS OND TEST SAMPLE PREPARATION CNC1 SAMPLE PROFILE Designed and manufa
84. lied 180 peel attachment Sample cut out template Calibration kit included Available in either 220 240v 50hz or 110v 60hz Fully traceable certificate of calibration Product user manual CE mark of conformity 1 year return to base warranty User defined High and low limits Load cell pre load indicator Temperature selector heated bed option Conforms to 1508295 ASTM D1894 OPTIONAL ANCILLARIES e Heated bed option e Freezer bed option e larger load cells Sleds to customer s requirements Thermal Printer WEIGHTS amp DIMENSIONS RR FT Net Weight kg Width cm Depth cm Height cm RAY RAN SAMPLE amp COMPONENT TESTING FRICTION ANALYSIS WITH TECHNI TEST Techni Test is an easy to use software package supplied with the Advanced Static amp Dynamic Friction Tester which allows user defined test data to automatically download to the apparatus for report information and for the operator to analyse all aspects of the friction test From the graph each Eu STL load cell reading is clearly identified giving accurate Tester frictional data analysis of en AE the materials under test zu Multiple tests are clearly visible on the graph J for results comparison within the batch and are 5 highlighted in different colours for viewing Placing the cursor over each plotted point the frictional value can be read on the screen For internal Quality Control procedures a
85. lly Calibrated better than Grade 0 5 EN 7500 1 DIN 51221 ASTM E 4 AFNOR A03 501 Range 0 4 to 100 minimum Automatic identification of load cell Resolution 1 part in 500000 with auto ranging Electronic load cell protection e Extension Measurement Full frame length to 0 001mm Resolution 0 001 min Accuracy 0 01mm Absolute relative and auxiliary modes mm inch and percent Programmable extension limits e Speed Control Drive system temperature and current protection Positional jog speed 0 001mm min to maximum Speed setting increments 0 001mm min e Load Frame Rigid frame using dual slide crosshead guidance system and rigid extruded support column Frame stiffness 100kN mm plus K factor facility built in Re circulating ball screw with bellows Electronic limit trips total travel trips and customer programmable safety stops Rubber mat front protection 89 qu 7 TW AL j a 2 UNIVERSAL TESTING MACHINES RR UTM M500 TECHNICAL SPECIFICATION e Twin column machine e Telescopic lead screw covers e A Cservo drive e Throat 420mm e Machine Capacity 5N 100kN Vertical space 1300mm e Auto Load cell identification e Direct connection to e Load cell protection extensometers e High resolution load cell e WinTest Analysis User selectable load and operating software travel limits e 5232 output for PC e Speed Range mm min 0 001 e Supply voltage 200 240V to 1000 or
86. low of heated air over individual test samples At set time intervals the test samples are removed and inspected for any deterioration or degradation making the apparatus ideal for research and development labs and product design Designed in accordance with BS 903 BS 6746 BS 5691 and ASTM E95 international test standards the apparatus is extremely cost effective and very simple to use The apparatus consists of 6 individual test cells with up to 8 samples per cell thus allowing 48 simultaneous tests to be undertaken The test samples are suspended in a controlled environment with temperature controlled air continually being circulated through each test cell at a constant flow rate The test samples are checked for thermal ageing at set time intervals and the condition recorded The apparatus has an integrated temperature bath fitted with digital temperature controller heater and a PT100 platinum resistance thermometer which accurately maintains the test temperature To ensure an even temperature distribution across each of the six partially submerged stainless steel cells two Archimedean type pumps are fitted to increase temperature stability within the bath The air flow through each cell is heated via coils submerged in a heat transfer medium and enters the cell through a diffuser nozzle for even air flow distribution For safety the apparatus is fitted with an over temperature thermostat which switches off the apparatus if
87. men thickness o a full set of pendulum weights equivalent to the traditional Sm CONFORMS TO contemporary styling and sopnisticated controls that 4 dub d a P pendulums A D pendulum check e Cutlength 15mm or 20mm Textile ASTM D 1424 DIN simplify and accelerate routine tear testing procedures weights a spare cutting blade and four e Tear length 43mm 53862 EN 150 13937 1 50 textile specimen preparation templates e Pendulum weights A D 8N 4674 2 AND 150 9290 M amp S The instruments intelligent operating system is equipped An optional E pendulum weight kit 16N 32N GAN P29 NEXT 17 NF 607 149 with industry specific features and terminologies for the with corresponding check weight and ES J Lo 4 offered each pendulum D 689 BS 4468 CSA D9 DIN user s convenience and ease of operation For simplicity the interchangeable jaw faces is offered to Automatic pendulum weight 53128 EN 21974 GB T 455 operator selects the unit of measurement and the numberof increase the capacity of the instrument detection 150 1974 JIS 8116 PAPTAC plies using a state of the art LCD touch screen display to 128N e Automatic zeroing D9 AND SCAN P11 SNV Visible and audible indicators also confirm valid test results Two handed pendulum release 198482 TAPPI 1414 UNI 6444 or signal the need to change the number of plies and or the o Automatic pendulum arrest Plastics ASTM D 1922 pendulum wei
88. mply selecting the appropriate results profile tab at the top of the graph By placing the cursor over each plotted point the impact value can also be read on the screen For internal Quality Control procedures at a glance high and low limits are clearly displayed on the graph in red showing instantly if the material is a pass or fail High and low limits are set on the main screen within the Techni Test software so they can be altered easily without having to re enter test data and re test material samples Tabular results are also displayed under the test results tab for quick results processing and comparison analysis between test samples Batch statistics such as Mean and Co efficient of Variation COV are also displayed and are updated after each test result is downloaded 52 ant wa me v 77 EE Tev koun A eren CR Die L pan 9 202000 m on were were s Ww wre Patet Car ast Pants 1 esten myter md EN e Test results can be printed directly from the Techni Test software in a report format or can be saved and exported as CSV files which can be opened with Microsoft Excel in tabular form which can be manipulated to your specific requirements such as preparing a graphical presentation or copying the results to a Word document for
89. mputer software Display cover Internal calibration Traceable Calibration Certificate 4 e NA n y 2 WEIGHTS amp DIMENSIONS PIONEER VA ER N y pre a au VAN A 1 TR UU gt _______ ADVENTURER WEIGHING BALANCE TECHNICAL SPECIFICATION Weighing Capacity 1100 up to 81009 Repeatability 9 0 0001 up to 0 1 Readability 9 0 0001 up to 0 1 2 Line Liquid Crystal Display LCD with Backlight RS232 with GLP GMP Data Output Rigid Metal ABS construction Glass draft shield with flip top door AC adapter included Multiple Application Modes Selectable Environmental Settings 18 selectable units of measurement non OIML approved OPTIONAL ANCILLARIES WEIGHTS 8 DIMENSIONS ADVENTURER Net Weight kg Thermal Printer Impact Printer Printer Cable Computer software Display cover Internal calibration Traceable Calibration Certificate Width cm Depth cm Height cm RAY RAN RAW MATERIAL EVALUATION ADVENTURER WEIGHING BALANCE The Adventurer is one of the industry s most versatile balances it counts it sums it holds and it delivers traceable results With a full range of Analytical and Precision models no other balance in its class offers all these features in a compact design Internal calibration ensures weighing accuracy by allowing you to calibrate the balance prior to use witho
90. n and using the alpha numeric membrane keypad test parameters such as user names material reference numbers and batch numbers are entered and stored in operator lists for future recall and results presentation Selecting the type of test is done at the press of a button and the testing parameters such as impact hammer weight impact velocity and sample size are entered to give the required testing conditions At start of each batch of tests a simple calibration of the apparatus is conducted for bearing resistance and windage and after each test sample has been tested the results are displayed on the LCD giving the impact energy in Joules Batch statistics of mean standard deviation and co efficient of variation are automatically updated after each test and results are shown in graphical and tabular format for analysis when downloaded to the supplied Techni Test PC software For quality control purposes High and Low limits can be defined when test results are downloaded showing the user instantly if the material is a pass or fail FALLING WEIGHT IMPACT TESTER RR FWT UNIVERSAL FALLING WEIGHT IMPACT TESTER Designed and built with operator simplicity in mind the Ray Ran Universal Falling Weight Impact Tester s simply the best in its class It is used to determine the energy required to break or rupture test specimens such as pipe sheet laminates composites ceramics and non ferrous metals for material and component ev
91. nd die for corrosive materials Please note that shipping weights will increase if heavy test weights are included For a complete set of test weights add Height cm approximately 30 kg to the weight 6MPCA ADVANCED MELT FLOW SYSTEM RR 6MPCA TECHNICAL SPECIFICATION Microprocessor Temp Control Dual Zone Heating Temperature Accurate to 0 1C Temperature Range 0 to 400 C Temperature Resolution 0 01 Digital Encoder Accurate to 0 02mm Multi slicing feature for accurate flow curve analysis Intuitive Menu Prompts TESTING FEATURES MFI OPTIONAL ANCILLARIES Operator list Material reference list Batch refwith data input Variable test temp input Variable test weight input Variable pre heat input Material density data input Variable test distance Multi slicing feature High and low limit parameter setting Weight Loader Option Test Die Piston 2 16kg Test Weight supplied as standard Filling and cleaning tools included as standard Conforms to ASTM D1238 ASTM D3364 150 1133 DIN 53735 and others Electrical characteristics 110v 60hz and 220v 50hz fuse rating 10amp Techni Test software included as standard DENSITY Operator list Material reference list Batch ref with data input Variable test temp input Variable test weight input Variable pre heat input Variable test distance Numeric input of material weight in grams Automatic calculation of Density at test temperature
92. nd mechanical and software overload under load protection AC adapter user selectable span calibration points auto tare user selectable printing options user selectable communications settings user selectable data print options user definable project and user ID s software backlit LCD display and clearly marked buttons the Discovery Pro tells you what is going on and whatyou have to do next It reset menu software lockout menu WEIGHING FEATURES Weighing Parts is supplied with a frameless flip top anti static glass draft shield which provides unobstructed 7 access to the working chamber To minimize Counting with Automatic Sample Recalibration Percent Weighing Check weighing Animal Dynamic Weighing Gross Net Tare Weighing Totalization High Point Density Statistics and Pipette Calibration weighing errors and ensure accurate measurements two internal weights are used to perform the internal linear calibration procedure which automatically calibrates the balance when it senses a temperature change significant The Discovery can be supplied with OIML approval and is offered in analytical and semi micro versions enough to affect the weighing accuracy The balance features a rear mount load cell for ultimate accuracy and isolation 14 RAY RAN A gt lt a lt 2 O q AUTO DENSITY 3 COLUMN DGA amp 6 COLUMN DGA RR DGA A
93. ndle on off functions selected using specified M codes High quality custom made single flute tungsten carbide cutters ensure a superior finish on any machined sample To compliment the machine a full clamping kit can be supplied for standard work holding and machining applications For more specialised work such as machining thick tensile test pieces from industrial polyethylene pipe samples bespoke work holding fixtures can be designed manufactured and supplied by Ray Ran to meet customer s requirements Pipe work is supplied as standard for air cooling to reduce the cutter temperature when machining components and the machine can also be fitted with dust extraction The fully enclosed cabinet has an internal light and an electrical safety interlock to ensure operator safety when the cabinet door is in the open position The CNC2 is supplied with Flashcut CNC operating software which is a dedicated real time CNC program for use on a PC or Laptop It interfaces effortlessly with the machine and uses industry standard numerical control G Code and letter addresses for programming Pre written programs are available direct from Ray Ran for any shape or size of test sample or to any International test standard If you require a larger machine than the CNC2 Ray Ran design develop and manufacture bespoke alternatives to customer s individual needs Feel free to contact us to see if Ray Ran can meet your requirements Flashcut
94. ne pipes that are used within the gas and water industry The versatility of the machine makes it ideal for Research and Development departments Laboratories and Universities Totally enclosed for operator safety the CNC2 comes with a bed size of 910mm x 480mm which has tennon slots for clamping down the sample Travel distances on the X Y and 2 axis are 600mm 300mm 175mm respectively and each slide way is fitted with high quality lead screws and linear guide rails for precision and accuracy Cutting feed ranges up to 2500mm min can be achieved for a fast accurate milling process with each axis driven and controlled by advanced stepper motor technology Homing switches are fitted as standard to each axis so machine and program co ordinates can be set easily on a day to day basis ensuring accuracy and repeatability especially if you are using a static clamping fixture for your machining process The compact high torque 1 5KW high speed router spindle which is fitted has a variable speed range from 2400 rpm to 24000 rpm and has a milling cutter capacity of up to 16mm diameter when fitted into industry standard ER25 collets The Routers spindle speed is controlled via the control panel dial as standard or the optional spindle expansion board so it becomes fully functional using the Flashcut CNC operating software With this option TEST SAMPLE PREPARATION spindle speeds can be set within the G Code program file and spi
95. ng Apparatus Based within a short distance of Birmingham Airport Train and Motorway routes Ray Ran Test Equipment is very accessible to many UK and European customers If your journey or visit requires an overnight stay Ray Ran can organise local hotel accommodation if required If you feel this facility would be beneficial to you please contact Ray Ran to arrange your visit WE LOOK FORWARD TO WELCOMING YOU TO RAY RAN TEST EQUIPMENT LTD DEMONSTRATION FACILITY 96 SERVICE CALIBRATION amp REPAIR RAY RAN SERVICE 8 CALIBRATION Ray Ran recommend a regular service and calibration programme for your testing equipment after purchase to maintain their accuracy and reliability All service and calibration procedures are conducted by skilled technicians with the most up to date equipment available ensuring your apparatus fully complies with International Testing Standards Calibrations are usually conducted on a 24hr turnaround basis ensuring limited downtime and expense to the customer Each machine is supplied with a Certificate of Calibration which is your guarantee of our competence and of the continuing accuracy of your instrumentation REPAIRS In the event that your equipment breaks down or develops a fault Ray Ran offer a complete repair program Conducted by fully skilled technicians the work will include fault diagnosis followed by a plan of action to make the equipment fully functional Ray Ran will notify you of all the cos
96. o give the heavy and light densities this procedure without the need to be pre mixed prior to being pumped into the column The filling system is a faster more accurate and more consistent method of building a density gradient column increasing time and productivity E RAY RAN ER 5 SE gt A Z LLI O x E gt LLI lt Q a lt RAW MATERIAL EVALUATION RAY RAN APPARENT BULK DENSITY Bulk density is a property of powders granules and other divided solids especially used in reference to mineral components soil gravel chemical substances pharmaceutical ingredients foodstuff or any other masses of corpuscular or particulate matter It is defined as the mass of many particles of the material divided by the total volume they occupy The total volume includes particle volume inter particle void volume and internal pore volume ASTM D1895 METHOD A Primarily used to measure the apparent density of fine granules that can be poured readily through a V shaped funnel the material under test is allowed to flow into cylindrical cup with a known volume of 100cm TESTS THATCAN BE CONDUCTED ARE e Apparent Density e Bulk Factor e Pourability Bulk density is not an intrinsic property of a material it can change depending how the material is handled For example a powder poured into a cylinder will have a
97. odels offered by Ray Ran This twin column machine is used in all industries worldwide for materials testing product testing x research and development and quality control applications Fully automated by advanced x computer technology the testing system with high precision control ensures simplicity in operation and x highly accurate test results The machine is offered in two models the standard CT and integrated AT range The CT Universal Testing Machine uses feature rich WinTest Analysis na software for control and testing 5 with comprehensive on board test methods that are compliant with all relevant industry standards including advanced standard and complex multistage test procedures which are fully configurable and controlled using a standard PC interface PC systems can be supplied or customers can utilise their own desktop computer or laptop to operate the machine The AT Universal Testing Machine is a stand alone machine which utilises the latest integrated touch screen technology and is fitted 86 with an integrated industrial computer module comprising 1 GHz CPU with 256MB Ram 40 GB Hard Drive with Windows XP operating LAN USB amp RS232 ports AT uses the feature rich WinTest Analysis software for control and testing with comprehensive on board test methods that are compliant with all relevant industry standards including advanced standard and complex multistage test proc
98. olenoid operated cooling e Bath capacity 8 litres system e 5 232 connection RS232 Cable e Integrated safety thermostat Windows File Capture Software e HDT Heads 1 per station e Fully traceable certificate of e Vicat 05 1 per station calibration e Standard Fibre Stress 0 45 1 8 Product user manual or 8 00 MPa e E declaration certificate e Used defined fibre stress for e 1year return to base warranty HDT testing available 110v 240v 16amp e Standard Vicat penetration of Conforms to 150 75 1 75 2 0 1mm or 1 00mm 75 3 306 and ASTM 0648 e User defined penetration depth D1525 D5944 D5945 OPTIONAL ANCILLARIES e Displacement Transducer e Light Weight Load rods to test 0 001mm to 45 MPa e Binary HDT Test Weights 1 set Heat Transfer Medium 5ltrs required per station e Nitrogen Blanket e 1 00KgVicat Test Weight 1 e Airto Nitrogen Extractor required per station e Thermal Printer e 5 00KgVicat Test Weight 1 e Thermal Printer Paper required per station e Water Chiller Unit WEIGHTS 8 DIMENSIONS HDT VICAT SOFTENING POINT APPARATUS RAY RAN SAMPLE 8 COMPONENT TESTING Vicat VST Softening point test A specified needle indentor penetrates a specified distance into a sample with a specified load whilst the temperature is raised at a uniform rate The temperature at which the sample was penetrated is recorded as the Vicat Softening Temperature VST Testing is carried out in accordance with the
99. ometer head The only exception to this interchangeability is the softest Shore OO range due to its very low indentor loads The models offered within the Ray Ran range are the STD226 Digital Durometer and the STD227 Analogue Durometer Each durometer comes with its own calibration certificate tested to the relevant module protective carry case product user manual and 12 month return to base warranty 94 Height INDENTATION HARDNESS RR STD226 RR STD227 TECHNICAL SPECIFICATION Model STD 226 Digital Durometer Resolution half of one degree Shore hardness scale Easy to use hand held Sturdy accurate and reliable BCD output facility Uses 1 5844 flat battery Multiple Modules with the same instrument head Supplied in convenient storage protective case Model STD 227 Analogue Durometer e Resolution one degree Shore hardness scale Supplied complete with tolerance settings Optional maximum hand Multiple Modules with the same instrument head Supplied in convenient storage protective case OPTIONAL ANCILLARIES Lever operated bench stand Set of 6 coloured rubber reference blocks shore A only Shore A Scale ASTM D 2240 ISO 7619 amp 868 DIN 53505 Shore B Scale ASTM D 2240 Shore C Scale ASTM D 2240 Shore D Scale ASTM D 2240 150 7619 amp 868 DIN 53505 Shore DO Scale ASTM D 2240 Shore O Scale ASTM D 2240 WEIGHTS DIMENSIONS INDENTATION HARDNESS APPARATUS Some
100. ool Inserts to suit any international standard e g ASTM ISO DIN JIS etc can be supplied for tensile dumbbells colour plaques impact bars etc For samples the piston extrudes the polymer into the moulding plate insert After the polymer has been allowed to set for that cannot be easily moulded within the standard a few seconds the tool block cam is tool block optional specialised tooling can be released and the moulding plate supplied to customers requirements within the insert withdrawn The moulded parameters of the machine test sample is then removed the injection gate is cleaned of The unique interchangeable cylinder liner and die any residual polymer and assembly supplied as standard with the apparatus the moulding plate insert compliments the simplicity of the equipment replaced and clamped in during and after the moulding process as it the tool block ready for the enables the operator to change from one colour or next sample to be moulded For a material to another in just a few seconds increasing more convenient flow of polymer production and eliminating the need for purging into the cylinder liner an optional Simply remove the cylinder liner being used and polymer feeder hopper can be replace it with a clean one wait for it to reach supplied so the liner is always temperature fill the liner with your new material topped up after each mould is and continue the moulding process The used liner produced ensuring a countl
101. operated anti rebound system to prevent the load carrier rebounding on to the sample after its initial impact preventing further damage to the test DIGITAL HEIGHT SCALE This optional feature can be fitted to accurately determine the drop height of your weight carrier The fitted LED digital readout clearly displays the drop height in mm or inches DROP HEIGHT POWER FEED ADJUSTMENT To further enhance the apparatus an optional powered lift can be fitted to raise and lower the drop height settings This feature is especially useful if your testing drop heights are in excess of 2 meters VELOCITY INDICATOR Fitted as an option this device accurately determines the falling velocity of the weight carrier making impact energy calculations even more precise UNIVERSAL FALLING SAMPLE 8 COMPONENT TESTING WEIGHT IMPACT TESTER FIXTURES By changing the supports and clamping mechanisms along with the shape of the Tup and variable weights the Ray Ran Universal Falling Weight Impact Tester can be manufactured to meet any test specification or costumers requirement making the equipment truly bespoke Typical test fixtures available include PIPETESTING V REST The test is used for the examination of pipe sections and tubing for impact strength properties as complete segments of pipe Sample diameters from as little as 12mm 2 up to 400mm can be tested on the standard machine The pipe is supported in
102. ormance you would expect to find only in A premium priced balances A compact design the Discovery Pro delivers accurate results within seconds improving operator efficiency and productivity The easy to use balance software utilizes text prompts to guide users through applications and balance setup Delivered througn a 2 line backlit LCD display and clearly marked buttons the Discovery Pro tells you what is going on and what you have to do next It is supplied with a frameless flip top anti static glass draft shield which provides unobstructed access to the working chamber To minimize weighing errors and ensure accurate measurements two internal weights are used to perform a linear calibration The internal calibration system automatically calibrates the balance when it senses a temperature change significant enough to affect the weighing accuracy The Discovery Pro provides users with four methods of density determination to choose from depending on their need They are 1 Determine density for solids more dense than water 2 Determine density for solids less dense than water 3 Determine density for liquid density sinker needed not included 4 Determine density for Porous material impregnated with oil After entering a couple of parameters into the balance the built in density table and mass measurement of the balance take over to provide rapid and accurate density results with no manual calcu
103. ort the sample material As standard the cutting stroke length of the apparatus accommodates A4 size samples but this can be increased to customers individual requirements To operate the Micro Cutting Machine insert the material under the cutting rails and position it into the clamping mechanism Slightly slide the cutting head to a position over the material approximately 10 20 mm from its clamped edge Push the cutter down on top of the material and pull the cutter head towards you across the guide rails Once at the end of its travel return the cutter head to its start position Simply release the clamping mechanism remove the material and trim the sample to the required length 43 MICRO CUTTING MACHINE RR MCM TECHNICAL SPECIFICATION Simple to operate film cutter Cuts film up to 250um 0 25mm thick Minimum sample width 250um 0 25mm Hardened and ground guide rail system Linear roller bearing guides Spring loaded cutter head assembly Interchangeable cutter heads Multi cut heads available Cutter heads made to customers requirements Sample clamping rail Cutting stroke length A4 as standard Product user manual CE declaration certificate 1 year return to base warranty OPTIONAL ANCILLARIES Cutting stroke length to customers requirements Cutter heads made to customers requirements Multiple blades available on one cutter head Cutting Blades Pack of 10 WEIGHTS amp DIMENSIONS RR MCM Net Weight
104. over all testing parameters to International Test standards and for the heavier weights the optional weight loader can fitted to the apparatus for ease in loading the piston The weight loader can also be used as a RAY RAN hold back feature for materials which have a high flow rate Please be aware that this machine has no computer connectivity or file capture software functionality Although the MFR value is not a fundamental property of the polymer it does however give an indication of the flow characteristics of the polymer and it has become one of the most widely used references for the quality control of polymers The machine is available in either 220 240v 50hz or 110v 60hz 6MBA BASIC MELT FLOW SYSTEM RR 6MBA TECHNICAL SPECIFICATION e Digital Temperature Controller e Large Twin Colour Display e Easy Set Point Operation e Temperature Accurate to 0 1 C e Temperature Range 0 to 400 C e Temperature Resolution 0 01 e Digital Timer Large easy to read display e Count Range 1 second to 99999 hours 59 seconds 8 character display e Test Die Piston amp 2 16kg Test Weight supplied as standard e Filling and cleaning tools included as standard e Conforms to method A of the ASTM standard e Electrical characteristics 110v 60hz and 220v 50hz fuse rating 10amp OPTIONAL ANCILLARIES Weight Loader e Full Range of Test Weights Available from 1Kg to 21 6Kg e Hastalloy cylinder liner a
105. parts counting and percentage weighing The integral up front level indicator quickly ensures the RAY RAN WEIGHING BALANCE balance is level prior to use and to help adapt the balance to real life working conditions the Pioneer is designed with selectable environmental settings When working in harsh environments the balance can be adjusted to compensate for vibrations and other disturbances Conversely the balance can be adjusted for working in slow filling applications where sensitivity isa must WEIGHING CAPACITIES Analytical 659 0 1mg up to 210g 0 1mg available Precision 2100 1 up to 4100g 0 1g available OTHER STANDARD FEATURES AND EQUIPMENT AC adapter user selectable span calibration points software reset menu stability indicator Auto Tare user selectable communications settings user selectable printing options and stainless steel platform The Pioneer can be supplied with OIML approval 11 PIONEER WEIGHING BALANCE TECHNICAL SPECIFICATION Weighing Capacity 659 up to 41000 Repeatability 0 0 0001 up to 0 1 Readability g 0 0001 up to 0 1 Liquid Crystal Display RS232 with GLP GMP Data Output Rigid Metal ABS construction Glass draft shield with flip top door AC adapter included Multiple Application Modes Selectable Environmental Settings 18 selectable units of measurement non OIML approved OPTIONAL ANCILLARIES Thermal Printer Impact Printer Printer Cable Co
106. port Abnormal results that could be caused by air voids are clearly identified and can be removed from the test data bringing the batch statistics into a normal range ensuring that the test procedure does not have to be repeated saving time and material Test results displayed in viewer mode can also be exported as CSV files easily Results screen ADVANCED UNIVERSAL PENDULUM IMPACT TESTER WITH PUNCTURE IMPACT TECHNICAL SPECIFICATION Advanced dedicated microprocessor control Touch membrane Alpha Numeric keypad Easy to read liquid crystal display Sequence logic menu auto prompt selection RS232 interface connector Ethernet Interface connector for LAN Networking Self calibration procedure for wind and bearing resistance High resolution positional encoder Variable pendulum velocity up to 3 8 m s Hammer energies up to 50 Joules Results in KJ M and KJ M Izod Charpy Tension Component Pipe and Puncture testing Electronic levelling device Safety guard Solenoid pendulum release with audible pre warning Tabular and graphical statistical analysis Techni Test PC software Product User Manual CE declaration certificate Traceable Calibration Certificate 1 year return to base warranty OPTIONAL ANCILLARIES WEIGHTS 8 DIMENSIONS RR IMT Izod Vice Charpy Rest Tension Impact Rest Specimen in bed method Puncture Impact Fixture Pipe Rest Component fixture to customer requirements Variable weight impact hamme
107. processor technology the Ray Ran Microprocessor Controlled Falling Dart Impact Tester has taken falling dart testing machines to an advanced level at an affordable price Built with operator simplicity in mind its ease of operation and high accuracy makes it ideal for product development and quality control within production research and development labs and teaching institutions The break energy that causes thin flexible materials such as plastic film paper and composite sheets to fail under specified conditions of impact from a free falling dart has never been easier to establish Complying with the ASTM D1709 Method A amp B the apparatus uses photo electric cells to measure the energy joules to break or cause failure to the sample being tested Usually manual testing requires at least sixty drops for each sample to gain a good result For the Ray Ran Microprocessor Controlled Apparatus this is greatly reduced For perfect energy readings on new samples a quantity of film will be required to firstly establish the working range of the drop weight required as the tup must completely fall through the sample to give an energy reading during a test This test is very simple to conduct using the Break Mass test Once the weight to pass through the sample has been established a working range of 5096 of the tup weight should be good enough to produce repeatable results If the break mass is already known then the Break Energy test will give you
108. r fail The apparatus is supplied as standard with Ray Ran s Techni Test Windows based PC software for connection to the apparatus via an RS232 or Ethernet connection Test results can be printed directly from the Techni Test software or can be saved and exported as CSV files which can be opened with Microsoft Excel in tabular form which can be manipulated to your specific requirements such as preparing a graphical presentation or copying the results to a Word document for a report presentation if required If the apparatus is connected to the PC via the Ethernet connector over a LAN network then the RS232 can be used for connection to an optional thermal printer for direct printout by the operator ADVANCED FRICTION TESTER RR FT TECHNICAL SPECIFICATION e Advanced dedicated microprocessor control e Touch membrane keypad e Easy to read liquid crystal display Sequence logic menu auto prompt selection e 5232 interface connector Ethernet Interface connector for LAN Networking e Tabular and graphical statistical analysis e Temperature display e Variable speed sled velocity up to 1800 mm minute TESTING FEATURES Operator list Material reference list Batch refwith data input Selectable test type Variable sled weight option Variable sled velocity option Variable test travel distance Variable sample settling time Test travel distance up to 350mm 1 kg load cell Sleds to ASTM or 150 test standard supp
109. rocess in seconds The uniquely designed gold reflective interior test area creates uniform distribution of heat to increase performance while decreasing test time with an operating temperature range from 50 to 160 C in 5 increments The temperature settings are incrementally controlled by the software for test accuracy and the test area reaches full temperature within 1 minute It has an easy to clean heating chamber which is operator friendly for routine inexpensive maintenance Manufactured to ISO 9001 quality assurance specifications the MB35 Moisture Analyser offers accuracy repeatability and quality in a compact design RAW MATERIAL EVALUATION RAY RAN MB45 ADVANCED MOISTURE ANALYSER The MB45 Advanced Moisture analyser sets the standards in high performance moisture content determination and is the most advanced of all the moisture determination equipment offered by Ray Ran The MB45 features a maximum sample capacity of 45g with a readability of 0 0010 and repeatability to 0 015 10g sample It is supplied as standard with Infrared halogen heating technology which begins the sample drying process in seconds An operating temperature range from 50 to 200 in 1 increments Is achieved rapidly and the uniquely designed gold reflective interior test area creates a uniform distribution of heat to increase performance while decreasing test time The Intuitive software features an integra
110. rs are heat treated several times during the manufacturing process to remove machining stresses and are diamond lapped finished for increased cutting edge wear resistance The cutters come complete with a spring loaded ejection system to remove the cut sample from the cutter and also protect the cutting edges A standard fixing shank to suit the Ray Ran range of presses is fitted to the cutter but non standard shanks can be manufactured to suit customer s individual requirements Cutters can be made to any size or shape required by the user and to any international test standard such as ASTM ISO BS DIN and JIS to name a few TEST SAMPLE CUTTERS RR TSC TECHNICAL SPECIFICATION Manufactured from high carbon D3 tool steel Heat treated for durability Diamond lapped finished Spring loaded ejection system Any shape or size available Specimens to suit all national and international standards such as ISO BS ASTM DIN etc Suitable for rubbers plastics paper fabrics and laminates e Fixing shanks to suit customers own requirements d DAJOLANV TEST SAMPLE PREPARATION AUTOCYCLE RAY RAN NOTCHING CUTTER To produce precise stress concentrated notch profiles in Impact and Charpy specimens look no further than the Ray Ran Autocycle Notching Cutter A world leader by design this machine will cut accurate notch profiles to international test standards such as ISO 1
111. rs up to 50 Joules Thermal printer Full safety enclosure Low Temperature Chamber Net Weight kg Depth cm Wath cm TBT Height cm RAY RAN ADVANCED UNIVERSAL PENDULUM IMPACT TESTER WITH PUNCTURE IMPACT Determining the most cost effective packaging SAMPLE 8 COMPONENT TESTING material specification for a particular application can be a daunting proposition The impact strength can be crucial ifthe handling of the package cannot be controlled especially if objects with sharp profiles are to be packaged and reliable information is not available on the material behaviour under different load conditions The Ray Ran Advanced Universal Pendulum Impact Tester has been designed to overcome these problems using the optional Puncture Impact fixture which makes it ideal for research and development within the packaging industry The Puncture Impact Tester can examine the material behaviour of thin brittle or ductile materials in a combination of different ways By using different Tup Strikers the mode of failure can be analysed to represent direct comparisons with yo other materials and produce in house quality control standards or to simulate actual service conditions For instance if impact elongation properties are required for ductile materials then a large spherical radius Tup Striker is used to induce a high degree of lateral elongation of the material before the Tup Striker can penetra
112. s an V block for testing polymer tube samples DUROMETER BENCH STAND RAY RAN DEMONSTRATIONS DEMONSTRATION FACILITY Ray Ran Test Equipment is very pleased to welcome customers to its If an onsite demonstration is not possible simply send us your test samples purpose built onsite demonstration facility based in Nuneaton and we will conduct a small batch test on the equipment of interest to The facility is ideal for product verification and validation purposes which verify the apparatus meets your testing requirements lets customers get a hands on experience of the equipment of interest to The following products are always available for demonstration For other wou iremen products please check in advance as they may be subject to a lead time For customers who have already purchased equipment from Ray Ran the onsite demonstration facility also provides an excellent place to train e Pendulum Impact Density Balance your personnel Our fully trained technicians ensure your operators are and Puncture Tester e Density Gradient Colum s e Melt Flow Indexer e Apparent Bulk Density fully conversant with all the technical aspects ofthe equipment and EE rd 4 a Pneumatic and Hand e Hardness Testers un B e operation profs ures ensuring accurate test results Cutting 6 MS maximizing the return on your investment e CNCI Milling Machines e Sample Notching Cutter HDT Vicat e Falling Dart e Test Sample Mouldi
113. s presentation Other parameters which are user defined are multi slicing and hi lo limits The multi slicing feature of the 6MPCA makes flow curve analysis instantly recognizable when the results are downloaded to the supplied Techni Test Software The operator inputs data for the amount of slices to be made during the setup process and the microprocessor accurately recoras the MFR result at 4 MODEL 6MPCA each slice during the test For quality control purposes the microprocessor can be set with High and Low limits which are clearly defined when the results are downloaded to a PC showing the user instantly if the material is a pass or fail IF a materials density at test temperature is not known then a simple density test can be conducted by extruding molten polymer over a selected test distance weighing the cut off and inputting the weight into the microprocessor The density RAW MATERIAL EVALUATION result will be automatically calculated and stored for you to conduct your MFI test After each test has been conducted the results are displayed on the LCD giving the MFI g 10mins Shear Stress Pa Shear Rate 1 sec Viscosity Pa sec and the Melt Volume Rate cc 10min which can then be downloaded via the on board RS232 connector or the Ethernet connection to Ray Ran 5 dedicated Techni Test Software where results are displayed in graphical and tabular form CSV files of the results can also be saved w
114. samo wanen emm 5 2 135 4 2o AM YE 9 3 BY BENCH STAND RR DBS SAMPLE amp COMPONENT TESTING RAY RAN LEVER OPERATED DUROMETER BENCH STAND The Lever Operated Durometer Bench Stand has been TECHNICAL SPECIFICATION Can be fitted with 570227 570226 durometers Easy to use lever operated Large sample lever platform Adjustable durometer height Set oftest weights supplied V block for cylindrical samples Product user manual 12 month return to base warranty OPTIONAL ANCILLARIES 510226 Durometer 510227 Durometer designed Ray Ran to enable the simple mounting ofa Durometer to be brought into contact withatest sample in a vertical direction with a known constant loading force being applied This almost entirely eliminates any operator influence on the results thus ensuring greater accuracy and repeatability Simple to operate the durometer is loaded with a specified static load and the test sample is placed on the lever operated surface plate The test sample is then pressed against the durometer and the constant force of the static load applied ensuring accurate repeatable test results Manufactured to comply with international testing methods ASTM D2240 and DIN 53505 the apparatus can accommodate both the STD226 and STD227 durometers The bench Stand is supplied complete with all test weights to the relevant test standard
115. screen La AAA AA A FLASHCUT PC SOFTWARE RAY RAN re Carra fie 32 bit versions of Windows based operating systems without REAL TIME CNC CONTROL IN A FLASH 0 0000 2 Feelativ Dist Ta risi x 0 0000 0 0000 Y O0 0000 Y 0 0000 ja 0 0000 2 0 0000 Flashcut CNC is a dedicated software package which gives high performance low cost CNC results and is supplied as standard with both models of the Ray Ran Sample Profile Cutter Effortlessly integrated between machine and PC Flashcut CNC uses standard numerical G Code and Letter Addresses for real time CNC control The Flashcut CNC software has an easy to use yet powerful operator control panel that puts all of the machine control you need at your fingertips It has been meticulously engineered to work seamlessly with 64 and TECHNICAL SPECIFICATION Digital readout display inc Program Machine Relative and Distance to Go co ordinates Full 5 axis support E Tool life management system Pocketing Very accurate runtime estimate Cycle program creator including Face Milling Engraving Hole Patterns and Custom Cutter compensation feature changing sensitive operating system parameters It dynamically displays the tool path while sending real time motion commands to the Signal Generator over high speed USB connection for smooth dependable accurate motion on most PC s or Laptops The syst
116. t a glance high and low limits are clearly displayed on the graph in red on showing instantly if the material is a pass or fail Tabular results are shown as Test1 Test 2 etc and can be seen by selecting the appropriate tab for a test Test reports can be printed from the main screen when each test has been completed by highlighting the specifictest tab and selecting the Print Test Report dialogue box to print the report Batch statistics such as Mean and Co efficient of Variation COV are also displayed and are updated after each test result is downloaded 46 AC Liebe i ro P icd Pr wam EN Ya 1 ee RAY RAN In Test Results Viewer mode users have the ability to upload saved results from previous test for Material Comparison Data Manipulation or File Export Abnormal results that could be caused by static or dust are clearly identified and can be removed from the test data bringing the batch statistics into a normal range ensuring that the test procedure does not have to be repeated saving time and material Exporting the results file in Viewer Mode is simple The Export file format is CSV and can be opened with Microsoft Excel ajdiSjdi LAWN I DNI11V3 SAMPLE amp COMPONENT TESTING RAY RAN TECHNICAL SPECIFICATION UA L FA L L 5 DA RT Manually Operated Falling Dart Impact Tester Compli
117. t value is clearly identifed giving accurate data analysis of the material under test The graphical impact results can be displayed in KJ M or KJ M by simply selecting the appropriate results profile tab at the top of the graph By placing the cursor over each plotted point the impact value can also be read on the screen For internal Quality Control procedures at a glance high and low limits are clearly displayed on the graph in red showing instantly if the material is a pass or fail High and low limits are set on the main screen within the Techni Test software so they can be altered easily without having to re enter test data and re test material samples Tabular results are also displayed under the test results tab for quick results processing and comparison analysis between test samples Batch statistics such as Mean and Co efficient of Variation 57 COV are also displayed and are updated after each test result is downloaded Test results can be printed directly from the Techni Test software in a report format or can be saved and exported as CSV files which can be opened with Microsoft Excel in tabular form which can be manipulated to your specific requirements such as preparing a graphical presentation or copying the results to a Word document for a report presentation if required In Test Results Viewer mode users have the ability to upload saved results from previous test for Material Comparison Data Manipulation or File Ex
118. te through the material to the point of failure If however a more brittle object to be packaged to see how the packaging material failure minimum elongation of the material is required a more would stand up to poor handling in service pointed Tup Striker is attached to the hammer to impact on the sample If required the Tup Striker can simulate the actual Itis possible that the direction of material flow of the specimen 58 SAMPLE amp COMPONENT TESTING RAY RAN could influence the test result therefore the test sample takes the form of a circular specimen up to 500 microns thick which is clamped in a sample holder To ensure repeatability a rubber O ring is used to exert the same tension across the test sample and to prevent the sample moving when under test The unique design of the variable weight pendulum hammer enables sheet material samplesto betested and punctured for ductile and brittle failure analysis An impact hammer energy range of up to up to 25 Joules and testing velocities up to 3 8 m s can be achieved ensuring the toughest of materials can be tested To calculate the impact energy the apparatus records the lost angle of the hammer after impacting a test sample against the angle recorded after calibrating the hammer The resulting lost angle is calculated as the test samples impact energy by the advanced microprocessor system The large on board liquid crystal display LCD provides simple on screen instructio
119. ted database which stores up to 50 drying procedures for maximizing productivity simply recall the test from memory and begin Accurate results are displayed on the large 128 x 64 pixel backlit LCD screen at the end of the test as 96 moisture 96 solids time temperature weight test D and drying curve and can be printed to an optional thermal printer via the onboard RS232 serial interface or connected to a PC for use with optional dedicated software OTHER FEATURES INCLUDE Four selectable automatic drying programs fourenhanced heating options and Statistical function for simple tracking and recording of standard deviation over time For Optimum Performance the MB45 also features Unique Auto Shut Off Options The MB45 lets you choose from three pre programmed end points for automatic test completion custom design your own test end point criteria or select Ya tS timed tests with audible signal when finished Enhanced Heating Option Choose from four pre programmed heating options including Fast for quickest possible time to temperature Standard for minimal overshoot while achieving temperatures quickly Ramp for controlled ramping to temperatures and Step set three temperatures for difficult samples a ADVANCED MOISTURE ANALYSER RR MB45 TECHNICAL SPECIFICATION e Weighing Capacity 45g e Repeatability Std Dev g 0 05 for 3g sample 0 015 for 10g sample e Readabil
120. tergents When the material is under certain conditions of stress these reagents can accelerate the cracking process which is one of the most common causes of unexpected brittle failure of polymers known Designed in accordance with the ASTM D1693 international test standard the apparatus is extremely cost effective and very simple to use Manufactured to a high standard the apparatus is supplied with electronic digital temperature control temperature bath and all tooling accessories The integrated temperature bath fitted with digital temperature controller heater and a PT100 platinum resistance thermometer accurately maintains the test temperature usually 50 C or 100 0 5 C To ensure temperature stability within the bath a stirrer motor system is fitted and the built in electronic timer monitors the duration of the test The bath is fitted with a stainless steel sample rack which holds up to 48 glass test tubes which are immersed in a heat transfer medium such as silicone oil Rubber stoppers to seal the tubes and test sample specimen holders in either stainless steel or brass optional are also supplied for each tube The specimen holder is designed to maintain a constant stress on the mid section of the test samples with up to 10 specimens fitted into a specimen holder at one time THE UNIQUE SET OF TOOLING ACCESSORIES REQUIRED TO PRODUCE YOUR TEST SAMPLES INCLUDE TEST SAMPLE CUTTER 38 mm x 13 mm SAMPLE NICKIN
121. tion 0 1 PT100 sensor accurate to 0 1 C Electronic timer HR MIN SEC Sample cover plate Product user manual CE declaration certificate 1 year return to base warranty OPTIONAL ANCILLARIES Test sample cutter 050mm Test sample cutter 50mm x 50mm Silicone oil 100ml bottle 7 Es WEIGHTS 8 DIMENSIONS RR FSHP aruma Wem 5 Jh Height cm y r T m Se s 2 K ou T j Gd gt X A e a 4 aYOOCNAW 13 SAMPLE amp COMPONENT TESTING RAY RAN ELMENDORF TEAR TESTER ELMENDORF TEAR TEST RR ETT TECHNICAL SPECIFICATION LCD graphics touch screen 4Sample preparation User friendly software templates Units of measurement N cN USB PC connection The Elmendorf Tear Tester offered by Ray Ran is connection to a computer however the optional PC software MN kgf gf ozf e Power Supply 85 264VAC a powerful and versatile instrument designed for package is designed to provide tools for saving recalling e Angular resolution 0 09 50 60Hz 60W accurately testing not only textiles and nonwovens deleting and printing test results y OUR o mE e Number of specimens plies CE declaration certificate The Elmendorf Tear Tester is supplied complete with a paper board and plastic It has been designed with W e Maximum speci
122. ts involved prior to work being carried out and all repairs are covered with a 12 month warranty COMMITMENT TO QUALITY Ray Ran Test Equipment Ltd is an ISO 9001 2008 UKAS accredited company and is proud of its record in supplying high quality products to its customers The Company s policy of commitment and dedication to support its customers ensures Ray Ran remains the world s leader in supplying polymer and materials testing equipment SERVICE AND CALIBRATION 97 TESTING INSTRUMENTS HIGH PRECISION TESTING INSTRUMENTATION SEKVICE AND CALIBRATION WORLDWIDE INSTALLATION MAINTENANCE AND CALIBRATION SERVICE TECHNICAL ASSISTANCE EXPERT ENGINEERING AND APPLICATIONS SUPPORT PRODUCT DESIGN amp DEVELOPMENT EXPERT ON SITE R amp D BESPOKE AND 1 OFF CAPABILITY CONTACT US WITH YOUR REQUIREMENTS eme eg RAYRANTESTEQUIPMENTLTD TEL 44 0 24 7634 2002 DOES E E O E OS RAS 44 0 24 7664 1670 EN ATTLEBOROUGH FIELDS EMAIL polytesteray ran com A INDUSTRIAL ESTATE WEB wwwray rancom NUNEATON Se 00 WX SE WARWICKSHIRE u amp ds RAY RA N
123. uct a simple test the apparatus is heated to test temperatureandthetestsamplesimmersedinthetemperature bath medium After 10 seconds they are removed and allowed to cool back to room temperature A measurement of the sample is taken longitudinal and transverse directions and the percentage shrinkage calculated 77 THERMAL FILM SHRINKAGE LIQUID IMMERSION METHOD RR FSL TECHNICAL SPECIFICATION Simple determination of Unrestrained Film Shrinkage Liquid immersion method Simple to operate PID electronic temperature control Resolution 0 1 PT100 sensor accurate to 0 1 C Integrated stirrer motor Electronic timer HR MIN SEC Stainless Steel liquid bath Sample cutting template 100mm x 100mm 6 off Sample specimen holders Stainless Steel Product user manual CE declaration certificate 1 year return to base warranty Conforms to ASTM D2732 OPTIONAL ANCILLARIES Net Weight ka ___ e With p Sample specimen holders Stainless Steel RAY RAN UNRESTRAINED LINEAR THERMAL FILM SHRINKAGE HOT PLATE METHOD RAY RAN SAMPLE amp COMPONENT TESTING UNRESTRAINED LINEAR THERMAL FILM SHRINKAGE HOT PLATE METHOD Designed and manufactured by Ray Ran the Hot Plate Thermal Film Shrinkage Apparatus is used to determine the thermal shrinkage of plastic film 8 sheeting and is ideal for most quality control procedures where precise results are essential The principal of the hot plate method
124. ures are then increased or decreased to find the temperature at which 50 of the specimens fail This is defined as the Brittleness Temperature 73 LOW TEMPERATURE BRITTLENESS APPARATUS RR LTB TECHNICAL SPECIFICATION Low temperature brittleness determination Integrated low temperature bath PID electronic temp control Resolution 0 1 C 100 sensor accurate to 0 1 C Integrated stirrer motor Temperature range 70 C to 100 C Stainless steel cantilever clamp Easy specimen removal Manual pendulum release Low friction bearing assembly Integrated specimen striker head Impact velocity 2 1 m s Test sample cutting die Product user manual CE declaration certificate 1 year return to base warranty 110v 60Hz 240v 50Hz 10 amp Product user manual CE declaration certificate 1 year return to base warranty Complies with ISO 974 AND ASTM 0746 OPTIONAL ANCILLARIES e Specimen cutter Type A Specimen cutter Type B Specimen cutter Type C e Specimen Clamps to 150 or ASTM test standard Net Weight ko 4 wth om o A RAY RAN gt SN LVdVddV DNDIOVHO 553915 IVLN3INNOSHIAN3 SAMPLE amp COMPONENT TESTING RAY RAN ENVIRONMENTAL STRESS CRACKING APPARATUS The Ray Ran Environmental Stress Cracking Apparatus determines the susceptibility of ethylene plastics to stress cracking when exposed to different environments such as soaps wetting agents oils and de
125. ut the need of external weights and the environmental settings offer three filter modes and adjustable zero tracking which are ideal for working in slow filling applications where sensitivity is a must When working in harsh environments the user can adjust balance settings to compensate for vibrations 12 and other disturbances All Adventurer models come with a built in RS 232 serial interface and with full GLP GMP data output it is sure to meet all your traceability and compliance requirements OTHER FEATURES INCLUDE DynamicWeighing Mode Allows the user to weigh small animals and filters out animal movements to provide a stable weight indication Parts Counting with Optimisation Allows the user to count based on a calculated piece weight With optimisation counting accuracy is improved through auto re calculation of the piece weight Percentage Mode Allows the user to display the weight of a sample as a percentage of a reference weight Check weighing Mode Allows the user to check the weight of a sample against a preset target Totalization Mode Allows the user to sum a series of sample weights Display Hold Mode Allows the user to hold the highest stable weight on the display until cleared WEIGHING CAPACITIES Analytical 1109 0 1mg up to 2609 0 1mg available Precision 2109 1mg up to 8100g 0 1g available The Adventurer can be supplied with OIML approval RAW MATERIAL EVALUATION RAY RAN EXPLORER
126. vanced HDT Vicat Apparatus ideal for product development and quality control within production research and development labs and teaching institutions and should more than meet all of your testing requirements ADVANCED HDT VICAT SOFTENING POINT APPARATUS RR HDV6 TECHNICAL SPECIFICATION e HDT Vicat testing enabled e Temp resolution 0 1 e Advanced microprocessor e Temperature ramp rates of 50 control or 120 C hr Power rise and fall of test User defined ramp rates stations available Dual pump stirrer system e HDT span supports 64mm or e 6sample test stations 100mm e Digital temperature control e Resolution 0 01mm e Temperature range to 300 C e Bath capacity 18 litres e Solenoid operated cooling e Built in printer system e RS 232 connection amp cable e Integrated safety thermostat Windows data logging HDT Heads 1 per station software e Vicat Nibs 1 per station e Fully traceable certificate of Standard Fibre Stress 0 45 1 8 calibration or 8 00 MPa e Product user manual e Used defined fibre stress for CE declaration certificate HDT testing available 1 year return to base warranty e Standard Vicat penetration of 240v 16amp 0 1mm or 1 00mm e Conforms to 150 75 1 75 2 e User defined penetration depth 75 3 306 and ASTM D648 for Vicat testing available D1525 05944 05945 OPTIONAL ANCILLARIES e Displacement Transducer e Light Weight Load rods to test 0 001mm to 45 MPa e Binary HDT T
127. vant industry standards including advanced standard and complex multistage test procedures THE STANDARD FEATURES OF THE CT AND AT MACHINES INCLUDE e Fully digital testing system with high precision control and accuracy includes automated computer control of test methods giving simplicity of operation e High resolution auto ranging load cells with accuracies better than 0 5 down to 1 1000th of the load cell capacity e Automatic recognition and calibration of load cells and extensometers with instant calibration check facility 800 overload capability of load cells without damage e Small footprint design giving economy of bench and floor space SAMPLE amp COMPONENT TESTING RAY RAN e High efficiency pre loaded self cleaning ball screws e Force Measurement Universally Calibrated better for fast quiet testing Fitted with sealed than Grade 0 5 EN 7500 1 DIN 51221 ASTM E 4 for life lubricated end bearings AFNOR A03 501 Range 0 4 to 100 minimum e Crosshead guidance system providing precise alignment and smooth running e Automatic identification of load cell Resolution 1 part in 500000 with auto ranging Electronic load cell protection e Precision crosshead control via digital AC servo drive and brushless servo motor giving maintenance free operation and 4 000 000 steps per revolution positional control e Extension Measurement Full frame length to 0 001mm Resolution 0 001
128. your energy reading in Joules The methods of holding the test specimen and releasing the dart are designed so that they may be accurately repeated for each test performed Test specimens are simply clamped in the unique two piece pneumatic clamp system which gives a constant tension across the surface area of the specimen ensuring test repeatability A dart of a known weight is then allowed to free fall and hit the sample To comply with the relevant test standards dart drop heights of either 660mm or 1500mm are easily obtained using the built in telescopic assembly The dart release mechanism is solenoid actuated for easy release and requires the use of both hands to release the dart to ensure optimum operator safety A fully electrical interlocked guard is also supplied to ensure the operators safety from falling and rebounding darts and for ruptured samples a dart return shoot is supplied for easy dart retrieval after the test The large on board liquid crystal display LCD provides simple on screen instruction and using the alpha numeric membrane keypad test parameters 51 such as user names material reference numbers batch numbers and tup types are entered and stored in operator lists for future recall and results presentation Selecting the type of test is done at the press of a button and the testing parameters such as drop height tup weight and sample size are entered to give the required test

Download Pdf Manuals

Related Search

Related Contents

Manual_EN  アクセサリーカタログ  QBiC MS-1 ユーザーズ・マニュアル  2-button and 4-button remote controls models 892lt and 894lt  - ID TECH JAPAN  Port Designs 135005  Sony CFD-S350 Cassette Player User Manual  programming the transmitter step 1  TOSHIBA AT100  ASUS C300 User's Manual  

Copyright © All rights reserved. Failed to retrieve file