Home
user manual for Mercedes-Benz NTG
Contents
1. ACC it will power on off automatically when the monitor turn on off CAN box wrong connection will not damage or hurt any device when correctly connected the LED will be blinking with data 6P to interface connector YELLOW BATTERY 12V RED ACC generated from the CAN bus for other devices BLACK Ground for chassis GREEN reverse signal lien 12V when reverse should be CAN inputs CAN CAN BATT GND connected to rear lamp WHITE switch signal when gt 3V the interface switches the input max 25V GRAY no function Accessories 1 One interface box 2 one CAN box with power cable 3 one daughter board with 50P other side ribbon 60P same side ribbon 4 AV input wire 2PCs CAM wire 1PC RGB wire 1 PCs 5 keypad 1 PC 4 4 http car solutions com en Car Video Interface for Mercedes Benz ML GL 2009 with Comand NTG2 5 System php
2. Mecedes0O9 interface installation manual This interface can insert RGB composite video into Mercedes 09 version monitors Monitor with SD card slot So RGB navi map or reverse camera video or TV DVD changer image can be displayed All the installation process is plug and play Ty fy Hi i ATCT ae cmima GVW B88 nm gt High resolution RGB NTSC display Composite video display Note the pictures below are Mercedes E ML car monitors This interface can be also used for E CLK GL ML Mercedes cars with SD card This interface box is made up of two parts external box and internal daughter board The internal daughter board should be inserted onto the 60P ribbon cable to monitor while the external box is located outside the monitor One 50P cable is used to connect these 2 parts 60P IN side ribbon cables to the socket 60P OUT side socket to the red original ribbon cable Installtion 1 Take the monitor out from the car For W211 220 cars only necessary to remove the plastic with hooks the monitor can be taken down on screws usually 2 Open the monitor s panel side in this way Remove the 4 screws that fasten the panel to the other part of monitor http car solutions com en Car Video Interface for Mercedes Benz ML GL 2009 with Comand NTG2 5 System php Then remove the big aluminum part Then a 60P white sockect inserted with RED ribbon cable can be s
3. een the interface is inserted between this ribbon cable and socket Take away the PCB then the LCD panel can be seen in this way the Gray metal part should be removed so that the small PCB can be located in its location 3 Install the daughter board and box The Daughter board has already 2 white ribbon cable The 5CM 60P ribbon should be connected to the PCB s 60P socket The 50P long ribbon should go out to the external box The 60P socket marked with OUT RED is for the 60P red panel ribbon Then the total is like this picture gt Then put the PCB the aluminum shell back http car solutions com en Car Video Interface for Mercedes Benz ML GL 2009 with Comand NTG2 5 System php 4 DIP SETTING i j2 H ON location OFF location RGB enabled RGB disable AV1 2 enabled AV1 2 disable When reverse l Green wire When reverse Green wire 12V go to AV4 12V go to Original video http car solutions com en Car Video Interface for Mercedes Benz ML GL 2009 with Comand NT G2 5 System php INPUT switch There are 2 ways to switch the input With the CAN BOX press the hang off on the steering wheel The user may also use the extra small keypad gt CAN Connection The CAN box will decode the CAN data and generate the ACC switch signal for the interface The ACC can be used for extra devices like reverse camera and TV tuner The interface box itself does not use 7
Download Pdf Manuals
Related Search
Related Contents
Freedom9 KVM-16H Switch User Manual Corvette C5-R vRanger Pro 4.5 & Data Domain Integration Best GEA19361_SVi1000QS_RevC Web ガス炊飯器 Druck DPI 800/802 - GE Measurement & Control Guía de inicio rápido DIM1 PORTABLE DIMMER OVERVIEW 1. DIM1 Actinium Motor User Manual(Eng) User Manual Copyright © All rights reserved.