ACM-3511
Contents
1. ED wt e Ok J Gna If you have a PoE Power over Ethernet supported switch or injector 1 Connect your IP Camera to the Switch Injector by CAT5 or CAT6 cables with RJ45 connector 2 Connect your Switch Injector to PC with another CAT5 CAT6 network cable If your switch does not support PoE and you are powering the camera with power adaptor 1 Connect the power adaptor to IP Camera 2 Connect IP device s Ethernet port to Network switch via RJ45 connectors 3 Connect a PC to the Ethernet switch via RJ45 connectors Please refer our PoE Guide for more details on Power over Ethernet related concepts 7 bia Act ACM 3511 Hardware User s Manual Tape ae Product Specification SaaS aaa ACM 3511 Micron Progressive Scan CMOS 1 3 inch Effective Pixels 1280 H x 1024 V Min Scene Illumination Color Color mode automatically switched to B W mode under 4 Lux B W 0 Lux IR LED ON IR Sensitivity from 700nm to 1100nm IR LED IR LED x24 850nm CDS Sensor IR Working Distance 20 30 M 30 IRE Focal Length 13 3 12mm F1 6 Viewing Angle 75 4 22 7 Horizontal Synchronization X Panning 0 330 Y Tilting 302 902 Sync System Internal Day Night Functions Functions 0 Mechanical IR Cut Filter Yes Motion Detection Yes 3 Windows Electronic Shutter 1 5 1 15 000 sec Fixed Shutter Manual 1 30 1 1 000 sec 60Hz 1 25 1 12. FCC Available only for device versions with enhancements 18 www acti com 2 Accessing Camera ACM 3511 Hardware User s Manual ACTi V gt Connecting Vision If you have DHCP server router in your network Many network server routers are able to automatically provide IP addresses through DHCP If you are using such a network just plug in your computer and IP Camera into the network and your IP device will acquire network address by itself Find and access the device with our IP Utility program You may download it at http www acti com product detail Software ACTi Utility Suite If you do NOT have DHCP server router in your network 1 Configure your PC to use the same subnet by changing your PC s IP address to the subnet with prefix 192 168 0 XXX The last number should be anything from 1 to 254 except 100 and other occupied IP addresses Subnet mask should be 255 555 255 0 2 The default IP used by this device is 192 168 0 100 Please make sure your PC is NOT using this address and that no two equipments use the same IP address in the network 3 Change your IP address by going to Control Panel gt Manage Network Connections gt Right click on the connection to change gt Option gt TCP IP IPv4 Properties ltcrnet Protocol 108 19 Properties TF Genera You can get IP settings assigned automatically if your network supports this capability Otherwise you need to as
3. Hardware User s Manual aa Safety Check Upon completion of any service or repairs to this video product ask the service technician to perform safety checks to determine if the video product is in proper operating condition 7 www acti com ACTi Connecting Vision Ds ACM 3511 Hardware User s Manual Physical description 1 Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector Supporting NWAY this IP device can auto detect the speed of local network segment 10Base T 100Base TX Ethernet 2 Power Input Connect the power adaptor here if your power input is DC12V pa jane pescano 12V DC Power Input 2 GND Ground Pin 3 Reset Button Step 1 Switch off IP device by disconnecting the power cable Step 2 Press and continue to hold the Reset Button with a sharp tipped object like a pen 8 www acti com me Acti ACM 3511 Hardware User s Manual Connecting Vision Step 3 Reconnect the power cable while continuing to hold the reset button The red Power LED light will flash on for 3 second first turn off for about 15 seconds flash on for another second and turn off again By this time the reset to default operation is already completed This will take around 20 seconds from power up You may then release the reset button This length of time fluctuates slightly with the environment The Power LED light will come back on and stay on after a few more seconds The
4. 000 sec 50Hz Flickerless 1 120 sec 60Hz 1 100 sec 50Hz AGC Automatic User defined AUTO INDOOR1 INDOOR2 OUTDOOR1 OUTDOOR2 HOLD White Balance CURRENT MANUAL Video Compression S N Ratio Better than 44 dB Compression MPEG 4 SP MJPEG selectable SXGA 1280x1024 HD 720 1280x720 VGA 640x480 QVGA 320x240 QQVGA 160x112 Bit Rate 28K 3M bps Picture Resolution SXGA at 8fps HD 720 at 10fps VGA at 30fps QVGA at 30fps Image Frame Rate QQVGA at 30fps Audio Output Compression 8kHz Mono PCM Audio Line Input Unbalanced 1 4Vp p 1Vrms terminal block Compression 8kHz Mono PCM Audio Line Output Unbalanced 1 4Vp p 1Vrms terminal block External I O Reset Button Factory default Digital Input 1 TTL terminal block Digital Output 1 TTL terminal block Mount Types Surface Pendant Wall Corner Pole Flush Ethernet Port Ethernet 10 100 Base T RJ 45 connector TCP UDP HTTP HTTPS DHCP PPPoE RTP RTSP DNS DDNS Protocol NTP ICMP ARP IGMP SMTP FTP UPnP Web Browser Microsoft Internet Explorer 6 0 or above SDK ACTi SDK 10000 Security Password protection configured by the administrator 10 C 50 C 14 F 112 F Power Requirement PoE IEEE802 3af with Class 3 Power Consumption 5 0W DC 12V 6 8W PoE Dimensions xH 130 mm x 99 mm 5 12 x 3 90 Weight 380 g 0 84 Ib Certificate CE
5. ACM 3511 Megapixel IP IR D N PoE Fixed Dome with Vari focal Lens Hardware User s Manual DC 12V PoE Ver 2012 3 12 D4 ACTI Connecting Vision ba ACT ACM 3511 Hardware User s Manual ee Table of Contents 0 Precautions 3 1 Introduction 4 Package Contents sii ctsissscdscnassvetevesneasistenduexsezsaedesntesvetveastedeceeseetrid 4 Feat res and Benefits sects cucpsceetecce 2 leetives ante cteeceecatanevececerceneneeenas 5 Safety NStrUCtIONS foesecetewatinirsnnesctcataaeissnenansesianst xatiumedecvtesaraeimsadtots 6 Physical description sitesi ncastereniabessnnsunscetiiccncasaeedenacmervasdeeneusupheeasendits 8 Installation Procedure eecceceeeeeeeeeeeeneeeeeeeeeeeeeeeeeesneeeeeeees 11 Ceiling Mount w sisscceccecesenndesndcncenedeendenesnnadsnenenenndedavsdennnenedenetenmuane 11 Wall MOUM Geeeeen eeneeeeeren weeereneee mre pete rr ea E 14 Basic COnnections sssssssssssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnana 17 Product Specification snannnneennnnnnnnnnnnnnennnnnnnnnnnnnennnnnnnnnnnnn nnne 18 2 Accessing Camera 19 If you have DHCP server router in your network csseseee 19 If you do NOT have DHCP server router in your network 19 2 www acti com RAAGI ACM 3511 Hardware User s Manual ay eee 0 Precautions Read these instructions You should read all the safety and operating instructions before using this product Heed all warnings You must a
6. abilities of the IP Camera series a powerful surveillance program is included in the package for free Users can easily use an existing PC as a digital video recorder Scheduled recording and manual recording keep every important video recorded in the local hard disk Reliable and accurate motion detection with instant warning enables immediate response in every condition Quick and simple search and playback function lets you easily find the images and video you want Software Development Kit Support This IP Camera can be integrated or controlled by applications from third party software developers Software developers can save considerable efforts by using our Streaming Library or ActiveX control Please contact us for details on integration support Digital Time Code Embedded The Digital Time Code Embedded function records video time in the video stream Therefore each image frame is marked with its original recording time It is very useful when users want to find the video at an exact time or between a certain time intervals 5 www acti com RAAGI ACM 3511 Hardware User s Manual D Safety Instructions Don t use the power supply with other voltages This device is likely to be damaged or damage other equipments personnel if you use a power supply with different voltage than the one included with this device All warranty of this product will be voided in the situations above Cleaning Disconnect this video produc
7. anual Connecting Vision Insert the cables Power Network DIO Audio through the mounting plate and connect to the camera Then use the little strap in bundled accessory to fasten the network cable 1 6 1 6 Done 3 gt lt ACTi gt Connecting Vision ACM 3511 Hardware User s Manual Wall Mount Tighten wall mount bracket to the wall by 3 PAN Head Tapping screws L 3 PAN HEAD SCREW TAPPING Tighten the plate to wall mount bracket with M4 10 screws and connect all necessary cables through the hole on the plate and wall mount kit E Lf LL 2 FLAT HEAD SCREW TAPPING M4x10 NA 1a ACTi Connecting Vision Rs ACM 3511 Hardware User s Manual Note that there s a triangle mark on both plate and wall mount kit Those triangle marks need to be fixed to the same direction Insert the cables power Network audio through the mounting plate and connect to the camera Then use the little strap in bundled accessory to fasten the network cable s ACTi Connecting Vision Rs ACM 3511 Hardware User s Manual Fasten the camera to wall mount kit by turning clockwise direction Done i ACTi Connecting Vision Rs ACM 3511 Hardware User s Manual Basic Connections Follow the procedures below to connect the IP device to the respective apparatuses
8. dhere to all the warnings on the product and in the instruction manual Failure to follow the safety instruction given may directly endanger people cause damage to the system or to other equipment Servicing Do not attempt to service this video device yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Trademarks All names used in this manual are probably registered trademarks of respective companies Liability Every reasonable care has been taken during the writing of this manual Please inform your local office if you find any inaccuracies or omissions We cannot be held responsible for any typographical or technical errors and reserve the right to make changes to the product and manuals without prior notice FCC CE Regulation NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the users will be required to corr
9. ect the interference at their own expense 3 www acti com ACM 3511 Hardware User s Manual 1 Introduction Package Contents ACM 3511 Product CD Accessories Warranty Card Drill Template ens o e N Pa N ORN oa J 4 LAs eae lt or S Drill template ACTi Connecting Vision bid www acti com bal ACT ACM 3511 Hardware User s Manual Features and Benefits This is a cutting edge digital video surveillance camera It can compress and transmit real time images with outstanding image quality 8 FPS SXGA 1280x1024 through a standard TCP IP network This camera is your best choice to build an intelligent IP surveillance system MPEG 4 MJPEG Dual Codec Compression This device supports two compression formats MPEG 4 and MJPEG It brings superior image quality at 8 frames per second up to a resolution of SXGA 1280 x 1024 pixels and offers up to 10 frames per second in HD720 1280x720 In VGA 640 x 480 QVGA QQVGA the device reaches 30 frames per second Built in Hardware Motion Detection No more external motion sensors are required You may assign up to 3 video motion detection areas By tuning the object size and sensitivity it will reliably detect objects passing though in view Hardware motion detection also offers better sensitivity and faster response time than software motion detection Powerful Bundled Surveillance Software To extend the cap
10. k your network administrator for the appropriate IP settings C Obtain an IP addess automatically Use the following IP address IP address 192 168 0 101 Subnet mask 255 255 255 0 Delat gateway e Use the following DNS server addresses Pretered DNS server Advanced Akemate ONS server 19 Please set the settings as below e IP address 192 168 0 xxx Subnet mask 255 255 255 0 NOTE xxx should be a number from 1 to 254 except 100 which is used by the IP device Please also make sure that no two equipments use the same IP address in the same network www acti com DA Acti ACM 3511 Hardware User s Manual Connecting Vision 4 Open Internet Explorer Version 6 0 or above and type in the Default IP 192 168 0 100 5 When you see the login window please input default user and password Default User Admin Password 123456 Account admin Password eececeee Language English v Login 6 After logging in you will see the video from camera To go to the main menu click the Setup button on the top left gt gt Setup Video Display MPEG4 V Scale Down F Audio Out amp Volume 84 v 2004 01 01 07 55 23 2 ACTi Connecting Vision Rs ACM 3511 Hardware User s Manual If you are using a single camera this is enough to access the device If you are using multiple devices you need to change the current device to another un
11. le gt gt Factory Default gt gt Save Reboot Click apply to save all settings and reboot this device ao System Save And Reboot Reset 12 Wait for 30 seconds and open IE again to connect to the new IP In this example ACTi Connecting Vision 192 168 0 101 For the second device or more you add into the network please type the correct IP 13 Adjust the video stream by going to Video Setting gt gt Video Display gt gt Host Setting gt gt WAN Setting gt gt Date Setting gt gt Video Setting gt gt Video Adjustment gt gt OSD Privacy Mask gt gt Camera Setup gt gt SNMP Setting gt gt UPnP gt gt Bonjour gt gt IP Address Filtering gt gt Event gt gt User Account gt gt System Info Camera Name Streaming Method B2 Frame Enable Audio In Analog Video Resolution Frame Rate Mode Frame Rate Encoder Type Video Bitrate Mode Video Maximum Bitrate Bitrate Video Control Port Video Streaming Port Camera 1 TCP Only pi 7 Disabled v NTSC 1280x1024 v Constant v By MPEG4 v Constant Bit Rate v UNLIMITED 3M X 6001 6002 JAN Version V2 0 Video Setting 22 www acti com
12. of 100mA DIO GND Ground Description DO Uses an open collector NPN transistor with the Max load lt 100mA Transistor emitter connected to the GND pin If used with an Max voltage 24V Output external relay a diode must be connected in DC to the parallel with the load for protection against transistor transient voltages DI Connect to GND to activate or leave floating or Must not be Digital unconnected to deactivate exposed to Input voltages greater than 30V DC Available only for device versions with enhancements 5 Audio Input Output ACTi Connecting Vision The IP device supports Audio input output with terminal block connections Pushing down the tab above will reveal a small slot for you to insert the end of wire Release the tab and the wire will be fastened by the internal spring The connection pins are as shown in this image 10 www acti com D4 ACTi ACM 3511 Hardware User s Manual Connecting Vision Installation Procedure Ceiling Mount Use the drill template and drill a hole with 35 on the ceiling Awe Tighten the plate to ceiling with M4 20 screws n D4 ACTi gt Connecting Vision ACM 3511 Hardware User s Manual Connect cables through the hole on the ceiling and plate or on the side of casing Fasten the camera to ceiling by turning clockwise direction 12 Dia ACTi ACM 3511 Hardware User s M
13. t from the power supply before cleaning Attachments Do not use attachments not recommended by the video product manufacturer as they may cause hazards Water and Moisture Do not use this video product near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like Don t use accessories not recommended by the manufacturer Only install this device and the power supply in a dry place protected from weather Servicing Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Damage Requiring service Disconnect this video product from the power supply immediately and refer servicing to qualified service personnel under the following conditions 1 When the power supply cord or plug is damaged N If liquid has been spilled or objects have fallen into the video product 3 Ifthe video product has been directly exposed to rain or water 4 Ifthe video product does not operate normally by following the operating Instructions in this manual Adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation 6 www acti com DA ACTI ACM 3511
14. unit will start up with factory default settings automatically Restore to Default Power On Complete are N fe Off about 15 Off 10 15 EX gt e E gt EGE gt About 20 Seconds 4 Digital Input Output The IP device supports Digital Input Output with terminal block connections Pushing down the tab above will reveal a small slot for you to insert the end of wire Release the tab and the wire will be fastened by the internal spring The connection pins are as shown in this image lt Digital Input Output include the following 1 transistor output For connecting external devices such as relays and LEDs Connected devices can be activated by Output buttons on the Live View page or through video management software 1 Digital Input An alarm input for connecting devices that can toggle between an open and closed circuit for example PIRs door window contacts glass break detectors etc The device will detect the change in digital input and transmit the signal to video surveillance servers 9 www acti com bia ACM 3511 Hardware User s Manual Terminal Pin Define is described as below Pin Name Description Spec DIO PW Electrically connected in parallel with the con Voltage 12V DC nector for the power supply this pin provides an Max 1 2W auxiliary connector for mains power to the unit This pin can also be used to power auxiliary equipment with a maximum current
15. used IP address so that when the next device is connected to the network no two devices use the same IP Please perform the following steps 7 Goto Setup gt WAN Setting 8 Choose Static IP Address 9 Change the IP to 192 168 0 101 or any other unused IPs Do NOT use the PC s IP address or 192 168 0 100 If this is not the first device you add to the network please also avoid other devices IPs gt gt Video Display Oyen 8 WAN Setting ao Dynamic IP Address gt gt WAN Setting Cl Use HostName ACTi gt gt Date Setting O Static IP Address IP Address 192 _ 168 _0 _ 101 gt gt Video Setting 4 Subnet Mask 255 _ 255 _ 255 _0 gt gt Video Adjustment ISP Gateway 192 _ 168 _0 _ 254 gt gt OSD Privacy Mask D PPPoE gt gt Camera Setup User Name gt gt SNMP Setting Password gt gt UPnP gt gt Bonjour Apply 10 Click Apply 11 Please go to Save Reboot and click Apply Internet Explorer will close after a few seconds This is normal 2 ACM 3511 Hardware User s Manual bia gt gt Video Display gt gt Host Setting gt gt WAN Setting gt gt Date Setting gt gt Video Setting gt gt Video Adjustment gt gt OSD Privacy Mask gt gt Camera Setup gt gt SNMP Setting gt gt UPnP gt gt Bonjour gt gt IP Address Filtering gt gt Event gt gt User Account gt gt System Info gt gt Firmware gt gt Profi
Download Pdf Manuals
Related Search