Home

Wii U Operations Manual

Contents

1. qa gt TM W g y l N gt A A E ez gt Operations Manual Frangais p 63 Espa ol p 127 The official seal is your assurance that this product is Official licensed or manufactured by Nintendo Always look for this seal when buying video game systems accessories Seal games and related products Please carefully read this Operations Manual before setup or use of the Wii U system If you have problems or questions after reading all of the instructions please visit our customer service area at support nintendo com or call 1 800 255 3700 Also additional pre installed electronic manuals are available for the Wii U system and software applications from the HOME Menu as described on the next page LAY Product recycling information re Visit recycle nintendo com IMPORTANT The Wii U system specifications and Wii U Services are constantly evolving and we may update or change the Wii U system or the Wii U Services in whole or in part without notice to you Such updates may be required for you to play new Wii U games enjoy new features or continue to access the Wii U Services After the Wii U system is updated any existing or future unauthorized modification of the hardware or software of your Wii U system or the use of an unauthorized device in connection with your system will render the system permanently unplayable Content obtained through the una
2. 3 See Transferring Wii System Data p 39 for information on the data you can transfer and other important notes Important Information on System Transfers e Transferred data is permanently deleted from the source Wii U console e Data saved to the target Wii U console including save data and user data is deleted and overwritten with the data on the source Wii U console Downloadable software that was saved to the Wii U console at the time of purchase will only be playable on the target console NOTE If downloadable software was saved to the source Wii U console at the time of purchase the Account Activity for that downloadable software will be moved to the Account Activity of the Nintendo Network ID that is selected at the time of the transfer USB storage devices that were previously used on the target console cannot be used on either console nor will you be able to use any data saved on the device NOTE The USB storage device must be reformatted to use with your console again Software and downloadable content that was previously downloaded to the target Wii U console will be deleted however if you re register the Nintendo Network ID that is linked to the target console after the transfer procedure is complete you can re download the content from Nintendo eShop at no cost To reuse the Nintendo Network ID that was linked to the target Wii U console before the transfer procedure you will need the Nintendo Network ID pass
3. 8 or 32 GB Read and follow the on screen instructions care fully The data saved on the SD Card will now be saved to the Wii U console Any downloaded content will be redownloaded to the Wii U console Depend ing on the amount of data transferred and your home network s download speed this may take some time NOTE When the save process is completed the data on the SD Card will be deleted 42 43 w m n D J Q G 107 lt n D 3 U w 44 Data You Can Transfer You can transfer only the following data listed in the table below You cannot transfer specific users and their data controller settings paired system informa tion or controller settings stored in System Settings or data other than what is listed below Visit support nintendo com wiiu transferdata for more information e Wii U software save data e Pre installed software and related save data Wii U software data e Software downloaded from Nintendo eShop and related save data e Software patches downloadable content and passes e Nintendo Network ID email address and other user settings User data e Parental Controls settings e Nintendo eShop account activity and balance e Wii software and Wii Shop Channel data 1 Some software cannot be used on the target Wii U console 2 Mii Maker friend list Miiverse and other system applications can be used on the target Wii U console without change
4. The Wii U console and accessories including the Wii U GamePad Wii U Pro Controller and Wii Remote controllers can emit radio waves that can affect the operation of nearby electron ics including cardiac pacemakers e Do not operate the Wii U console and accessories within 9 inches of a pacemaker e If you have a pacemaker or other implanted medical device do not use the Wii U console and accessories without first consulting your doctor or the manufacturer of your medical device AXCAUTION LASER DEVICE The Wii U console is a Class laser product Do not attempt to disassemble the Wii U console Refer servicing to qualified personnel only CAUTION Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure Specifications Laser Type Semiconductor laser Laser Wavelength 405nm 660nm Laser Power Max 0 6mW Max 0 9mW Numeric aperture 0 85 0 6 AAWARNING BATTERY LEAKAGE The Wii U GamePad and Wii U Pro Controller contain a rechargeable lithium ion battery Leakage of ingredients contained within the battery or the combustion products of the ingredients can cause personal injury as well as damage to your Wii U system If battery leakage occurs avoid contact with skin If contact occurs immediately wash thoroughly with soap and water If liquid leaking from a battery comes into contact with your eyes immedi ately flush thoroughly with water and see a doctor
5. e You cannot use the Wii U GamePad to turn off the console power if you are using the Wii Menu or playing a Wii Game Disc Are you pressing the HOME The HOME Button on the GamePad does not turn the Button on the GamePad Wii U console off To turn the power off press the POWER Button on either the Wii U console or GamePad Is Standby Functions If Standby Functions is enabled and the console is turned enabled off the Power LED will turn orange if software is in the process of being downloaded or installed The power LED will turn red automatically when this process is complete The Wii U GamePad won t turn off Did you press and hold down If the power does not turn off after holding down the the GamePad POWER Button GamePad POWER Button for one second then hold the for one second POWER Button down for at least four seconds The Wii U GamePad battery LED does not turn on The battery LED will only turn on when charging the battery or when the battery level is low Burooyusajqnoly 39 Burooyusajqnoly 56 Batteries and battery charging Cannot charge or recharging takes a long time Are you using the correct charging equipment NOTE Remove covers or any other added accessories before charging Wii U accessories Is the AC adapter plug or USB cable fully inserted NOTE You can only charge the Wii U Pro Controller when the Wii U console is turned on Are you charging at an ambient temperature of 50 9
6. Wii menu and other operations e Wii Menu Electronic Manual This manual describes the Wii Menu features and gives detailed instructions on how to use the included software Viewing an Electronic Manual When the Wii U Menu is displayed press on the Wii UTM GamePad to open the HOME Menu then tap EJ to open the Wii U Electronic Manual Press or select the button in the lower right corner of the screen to switch languages e Press A while playing a Wii U software title to see the electronic manual for that software e Touch at the bottom left of the screen to close the manual and return to the previous screen you were viewing before opening the HOME Menu 1 important Information 2 wa U Menu 3 HOME Menu HOME Menu Electronic Manual Contents Use the stylus to tap and slide or use the L or R Stick p 11 to view the manual 1 Important Informatic gt ant Information 1 moortant Information jal is a supplement to the Wii U iS manual ts a su ent se Wii n ur system an Manual included with your system 2 D system al s d features gt 2 va U Menu gt AE efore using your syst be sure to read the ng your system be sure to read the 1 ealth and Safety Infr tion application ld Safety Information application h on the Wil U Menu 3 Home Menu Selecting items Viewing pages Changing pages NOTE The illustrations and screen shots in this manual are for reference only the ac
7. being used recommendations forlong periods while Wii U console 50 104 F 10 40 C charging it Wii U GamePad 50 95 F 10 35 C Wii U Pro Controller 50 95 F 10 35 C The Wii U console suddenly shuts off Is there dust or other material Unplug the AC adapter for the Wii U console from the wall clogging or blocking the outlet and remove any dust dirt or other foreign material console vents from the vents Is the console located where it Move the console away from sources of heat and make can be exposed to high sure there is at least 4 10 cm between the console vents temperatures and any walls or other objects Is the Wii U console s If the Auto Power Down feature is enabled the system will automatic shutoff feature automatically turn off if there is no controller input for a set enabled period of time You can adjust the period of time in System Settings on the Wii U Menu under Power Settings Are you using unsupported Make sure you are only using USB devices compatible USB devices with the Wii U with the Wii U console Visit support nintendo com for console more information The Wii U console will not turn off the power LED won t turn red Did you press and hold down If the power still does not turn off hold down the Wii U the POWER Button for one console Power Button for at least four seconds The Power second LED does not completely turn off even when the console is turned off
8. disconnect the USB cable if it is connected to the controller Loosen the screw and remove the battery cover The battery cover is designed so the screw can be loosened but not fully removed NOTE To avoid damage to the screw or threads use a screwdriver that is appropriate O Wait at least 10 seconds then insert the new battery for the screw crosshead style size 0 Make sure the battery is oriented correctly as shown below e Waiting 10 seconds will allow the power LED to reset correctly D D fas t 2 2 lt lt rs rs D D o o 0 fan O O D D 3 3 D D gt or or 2 Remove the battery O Replace the battery cover Insert the stylus from the Wii U GamePad under the battery as shown below and gently After replacing the battery cover tighten the two screws being careful not to lift the edge allowing you to remove the battery overtighten them e Please recycle the used battery p 52 IMPORTANT Always be sure to replace the battery cover and tighten the screws before resuming use 3 Wait at least 10 seconds before inserting the new battery Recharge the GamePad Make sure the battery is oriented correctly as show Always recharge the GamePad battery after replacing it p 18 in the illustration e Waiting 10 seconds will allow the power LED to reset correctly Turn the power on Press on the Wii U GamePad to turn the Wii U console on 50 51 Ed Replace the battery c
9. list of wireless access points routers confirmed to work with the Wii U console You cannot use access points that only support the 802 11a standard See the Wii U Electronic Manual EJ Parental Controls for more information IMPORTANT Restriction options are dependent on the availability of system features When your network environment is ready A System Update may be required for a complete list of options gt U a o Configure your connection settings z 2 Conc te nt Game Rating Restricts all usage as well as purchase through Nintendo eShop of 7 ney stem oeng temer on rule a software exceeding the selected rating A the Wii U Menu L A O 4 NOTE Detailed instructions ale A Online Interaction in Games Restricts the use of online features of software such as online play 5 3 i z 3 mamaaa conversation among users and Miiverse posts x Q displayed on the TV screen during o n configuration Internet Browser Restricts the use of the Internet browser Wii U Shopping Services Restricts the use of credit cards or the purchase of software through services such as Nintendo eShop L If you cant connect to the Internet Restricts users from viewing or posting content on Miiverse e Check the location and distance of your access point If possible locate your access aan lector Restricts th registration of additional riends point in the same room as your Wii U console for the strongest signal y i Entertai
10. make sure that the batteries are inserted correctly If the LED still won t turn on replace both of the batteries Is the Player LED on the Wii Remote lit Burooyusajqnoly Have you synchronized the Press the SYNC Button on the Wii U console and follow the Wii Remote with this console instructions on the screen Are you either too close or too Always play from 3 10 1 3 m from the sensor bar or 1 3 far from the sensor bar 30 100 cm for the GamePad If this does not resolve the issue adjust the sensor bar sensitivity in System Settings on the Wii U menu Adjust Sensitivity Remove any objects that might be blocking the signals between the Wii Remote and the sensor bar Is the sensor bar connected to Make sure that the sensor bar is placed correctly p 26 the Wii U console installed Unplug the sensor bar once and plug it in again making correctly sure the sensor bar plug is fully inserted into the connector on the console Is there any obstruction in front of the sensor bar 59 zi O a a D n a gt O O ct J 60 Wii Remote controllers continued can t use the Wii Remote or the Wii Remote does not respond properly Are there any play conditions If you think any of the following conditions are affecting that could interfere with the the operation of the remote try removing or reducing the operation of the remote source of interference e Bright light sources including s
11. may find the following booklet prepared by the Federal Communications Commission helpful How to Identify and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington D C 20402 Stock No 004 000 00345 4 Usage restrictions for the Wii U console and Wii U GamePad This product is restricted to indoor use only to reduce any potential for harmful interference with licensed operation in the 5 15 5 25 GHz range WARNING RADIO FREQUENCY EXPOSURE To comply with FCC and IC RF exposure compliance requirements when using the Wii U console a separation distance of at least eight inches 20 cm must be maintained between the antenna of this device and all persons
12. other device This works with Wii U software exclusively designed to use this feature see game packaging for compatibility information Using the Touch Screen You can use the stylus or your fingertip to lightly tap or touch the screen You can touch the screen and lightly slide the tip across the surface e If the Touch Screen does not seem to respond correctly to stylus input see trouble shooting for the Wii U GamePad p 58 Using the Wii U GamePad with a stand or cradle Place the Wii U GamePad stand or Wii U GamePad cradle both included in the Deluxe Set only on a flat horizontal surface and place the Wii U GamePad on the stand or cradle horizontally e Do not place the Wii U GamePad vertically e When using the Touch Screen or buttons hold the Wii U GamePad in your hands not the stand or cradle 11 Un lt wn 3 O O 3 D O 5 D 5 ct un UN lt Wn 3 O O 3 D O 5 D 5 ct wn 12 Top View Back View 18 I O O 7 E c CD A SSS M Bottom View E L amp ZL Buttons O R amp ZR Buttons Stylus Holder e Always replace the stylus in the stylus holder when not in use A Volume Slide to adjust the volume level of the Wii U GamePad speakers Infrared Transceiver Sends and receives information when using infrared communication Audio Jack For connection of stereo headphones sold separately e If
13. source and which is the target eS Source Console Are aping the annropiate butonon each Automatic Download of Software and Data from the Source Console GamePad follow the on screen instructions You can check the status of automatic downloads from Nintendo eShop after System Transfer is complete by selecting Download Management on the Wii U Menu see the Wii U Electronic Manual J Download Management e If the number of downloadable item exceeds 64 you will have to download them individually from Nintendo eShop e You can play any downloaded software as soon as it is finished downloading e Some software may take an extended time to download 46 47 Controller Calibration Battery Replacement Use the following instructions to recalibrate the Touch Screen or reset the L and R control Rechargeable batteries become worn with repeated charge discharge cycles and the amount sticks if they do not seem to be operating correctly of time they can be used when fully charged will decrease gradually over time after 500 charges usage time may be reduced to 70 If you feel the usage time has dropped off A J noticeably replace the battery Calibrating the Touch Screen IMPORTANT Batteries should always be replaced by an adult Open the Wii U Menu and select System Settings Select the option for calibrating the Wii U GamePad Touch Screen and follow the on screen instructions If you are unable to use the Wii U GamePad Touch Sc
14. 5 F 10 35 C Is the battery LED blinking orange e Wii U GamePad use the Wii U GamePad AC adapter Model No WUP 011 p 18 e Wii U Pro Controller use the Wii U Pro Controller USB Cable Model No WUP 018 e Wii U GamePad remove the AC adapter from the wall outlet and GamePad for 20 seconds then reinsert it back into the AC adapter connector on the controller or charging stand and into the wall outlet and try recharging again p 18 e Wii U Pro Controller remove the USB cable wait a few seconds then reinsert it and try recharging again p 20 Charge within the recommended temperature range of 50 95 F 10 35 C Battery charging can be adversely affected by extremes of temperature Make sure that the battery is properly connected see the section on Battery Replacement p 49 If the LED is still blinking during the charging procedure contact Nintendo Customer Service NOTE Due to the properties of lithium ion batteries they can permanently lose their charge when not in use for an extended period of time Be sure to charge lithium ion batteries at least once every six months Battery charge doesn t last long and or recharging takes a long time Are you playing or charging at an ambient temperature below 50 F 10 C Are you using an old battery Usage time may be reduced and recharge time may be increased when temperatures are below 10 C 50 F For best results use the system within
15. D 5 To find a collection site near you contact your local solid Battery for the 3 waste authority or in the United States visit Wii U GamePad http www epa gov osw conserve materials battery htm For more information or for assistance from Nintendo visit recycle nintendo com A Remove the button cell battery and Battery for the Wii U Pro Controller replace the battery cover Insert a new battery type CR2032 so that the positive side is up and then replace the battery cover After replacing the battery cover tighten the screw being careful not to overtighten it IMPORTANT Always be sure to replace the battery cover before resuming use Handling Used Button Cell Batteries e Cover the positive and negative sides with tape e Dispose of following local laws and regulations e For more information visit www dtsc ca gov hazardouswaste perchlorate 52 53 Bulooyusajqnoly 54 Troubleshooting Before seeking assistance please review the following problems and solutions You can also visit support nintendo com for assistance and additional troubleshooting and repair options or call 1 800 255 3700 e Additional information can be found in the Wii U Electronic Manual E Troubleshooting e See the Wii Menu Electronic Manual 1 for more information about using the Wii Menu e Review instruction manuals for any games or accessories you are using Power supply and operating tem
16. E Button Speaker 6 1 Button T 2 Button Player LEDs Indicates the player number assigned to the controller currently in use B Button E Wii Remote Wrist Strap P Strap Lock B SYNC Button Press this to pair synchronize the Wii Remote Plus with the console see illustration below D 3 Wrist Strap Attachment Q 3 E External Extension Connector p Allows connection of external accessories such as the Nunchuk M z 5 Wrist Strap Cord a Using the SYNC Button Some Wii Remote models require you to remove the battery cover to press the SYNC Button Recalibrating the Wii Remote Plus If the cursor on the TV screen moves even if the Wii Remote Plus is not being moved or moves differently than when the Wii Remote Plus is moved the remote may need to be recalibrated due to the following e Changing batteries in the Wii Remote Plus during gameplay e Moving the Wii Remote Plus from a cold environment into a warm environment To recalibrate the Wii Remote Plus place it on a flat horizontal surface with the buttons facing down Wait for a few seconds and check the operation Also review the instruc tion manual for the game you are playing for more information NOTE This procedure must be done during gameplay 15 Un lt Un 3 O O 3 D O 5 D 5 ct wn 16 Wii U Pro Controller optional accessory The Wii U Pro Controller is sold separately This controller on
17. EMOVED ANY APPLICABLE IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY LIMITED IN DURATION TO THE WARRANTY PERIODS DESCRIBED ABOVE 12 MONTHS OR 3 MONTHS AS APPLICABLE IN NO EVENT SHALL NINTENDO BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE BREACH OF ANY IMPLIED OR EXPRESS WARRANTIES SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OF CONSEQUENTIAL OR INCIDEN TAL DAMAGES SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU This warranty gives you specific legal rights You may also have other rights which vary from state to state or province to province Nintendo s address is Nintendo of America Inc RO Box 957 Redmond WA 98073 0957 U S A This warranty is only valid in the United States and Canada Revision R1 61 5 w lt w o NY D O D 3 O 3 SY E O 5 po D o mv O 3 n O m Q 5 3 D 3 C Nn D 62 Regulations for Equipment Use FCC and Industry Canada Information In order to comply with FCC radio frequency radiation exposure guidelines for an uncontrolled exposure this device and its antenna must not be co located or operating in conjunction with any other antenna or transmitter This device complies with Part 15 of the FCC Rules and RSS 210 of Industry Canada Operation is subject to the following two conditions 1 T
18. On the Wii U system game save data gameplay times and other player information can be saved and managed for each person using the system To use network based services or features you must first configure your Internet connection as well as register a Nintendo Network ID for each user Tap the Mii character at the top left corner of the Wii U Menu to go to the User Settings screen to change or set up users User Settings Nintendo Network ID No ID linked E ii gt Switch User Create Link Nintendo Network ID E J a ES m 5 Change Mii Registering a Nintendo Network ID Tap Create Link Nintendo Network ID on the User TER Settings screen and follow the on screen instructions ciate policies anal No ID linked e If you already have a Nintendo Network ID on one of the Nintendo 3DS family of systems you can register the same ID on your Wii U console and share informa Switch User S eate Link S Network ID tion such as your Nintendo eShop account balance on meen c both systems O 9 e A Nintendo Network ID is not the same as a Club Nintendo ID a e An email address is required to register a Nintendo Network ID E nm e A parent or guardian must register users 12 years of age or younger and a parent or guardian s email address is required When registering a Nintendo Network ID Each user that registers a Nintendo Network ID can access Miiverse Nintendo eShop and the Fri
19. To avoid battery leakage e Do not expose battery to excessive physical shock vibration or liquids e Do not disassemble attempt to repair or deform the battery e Do not dispose of battery in a fire e Do not touch the terminals of the battery or cause a short between the terminals with a metal object e Do not peel or damage the battery label Some accessories may use AA batteries Nintendo recommends high quality alkaline batteries for best performance and longevity of battery life If you use rechargeable nickel metal hydride NiMH batteries be sure to follow the manufacturer s guidelines for safety and proper usage Leakage of battery fluid can cause personal injury as well as damage to your system and accessories If battery leakage occurs thoroughly wash the affected skin and clothes Keep battery fluid away from your eyes and mouth Leaking batteries may make popping sounds To avoid battery leakage e Do not mix used and new batteries replace all batteries at the same time e Do not mix different brands of batteries e Nintendo recommends alkaline batteries Do not use Lithium ion nickel cadmium NiCd or carbon zinc batteries e Do not leave batteries in the remote for long periods of non use e Do not recharge alkaline or non rechargeable batteries e Do not put the batteries in backwards Make sure that the positive and negative ends are facing in the correct directions Insert the negative end first Whe
20. age to the Wii U Pro Controller battery or other equipment always use the USB ports on the Wii U console for recharging Do not use other devices that have USB ports such as computers Estimated Charging Time and Battery Life e Charging Time approx 4 5 hours Charging time will vary depending on how the system is being used and how much charge is left in the battery e Battery Life approx 80 hours Actual battery life depends on the features used such as the rumble feature or wireless communication use ambient temperature and other factors Battery LED Status The color and status of the LED changes depending on the remaining battery charge e If you run out of battery life while playing a game you will not be able to use the controller If the battery LED turns red charge the Wii U Pro Controller Full charge Low A l Ni i 1 1 1 O O BATTERY BATTERY Off Steady red Blinking red l l l Remaining battery life i l 1 l Battery LED status BATTERY 21 Q ey w Q 3 o eE gt D Cc V x O Q O 3 er 2 D z gt O ctr 2 D T O 0 O N O S 22 Turning the Power On Off You can turn the power on and off using either the Wii U GamePad or the Wii U console Make sure the Wii U GamePad has been paired with the console before use p 25 Options for Turning the Power On To turn the power on press either the POWER Bu
21. and the screen will display the notification when it is received e The screen will turn off automatically after a certain amount of time however you can turn it off immediately by tapping Close on the bottom left of the Notifications screen e You can select the audible tone on the Quick Start Setup screen Pairing Controllers Before using a Wii U GamePad Wii U Pro Controller or Wii Remote controllers they must first be paired with the Wii U console After pairing you will be able to turn the console power on and off by pressing on the controller See the information at the bottom of the page for specific information on pairing a Wii U GamePad e If you will be using Wii Remote controllers you must first install the included sensor bar p 26 Some software titles do not require a Sensor bar e A controller must always be paired to the console you wish to use it with If a controller has been paired to a different console it will need to be paired again to any new console you wish to use it with including Wii Remote controllers for Wii consoles e For the Wii Balance Board please see the instruction manual included with compatible software for pairing instructions Pairing Procedure for Controllers To pair a Wii Remote Wii U Pro Controller or other compatible accessory first open the Wii U Menu then press SYNC on the front of the Wii U console Follow the on screen instructions and press SYNC on the control
22. ar plug is inserted completely Place the sensor bar to into the connector s slightly overhang the front 3 e If you already have a sensor bar installed for a Wii Q console you can switch it to the Wii U console rather surface of the TV screen than installing an additional one D F y 3 Remove the protective film from the O f d the bott fth Place the sensor bar on the D Ce ere unas en ee same surface as the TV Sy O sensor bar S S o 7 3 Place the sensor bar above or below the TV screen Recommended Play Environment See sensor bar Placement Guidelines on the next page for reference For the best results when using the Wii Remote controller e The front of the sensor bar should be directly in front of you and clearly visible e Avoid blocking the signal between the remote and the console or sensor bar e Sit or stand directly in front of the TV between 3 and 10 feet 1 3m away If you place your sensor bar under the TV screen e Avoid bright light sources behind or near the TV On the Wii U Menu in System If the Wii Remote is not operating properly see Wii Settings select Wii Remote and Remote and Sensor Bar in System Settings on the Wii U Sencor Bar Sat Senzor Bar Menu to make adjustments or review Wii Remote Position and set the position of controllers in Troubleshooting p 59 the sensor bar to Below the TV This is necessary for proper operation of the Wii Remote controllers 27 E 2 3
23. at change the size of the picture being displayed on the screen Adjusting these modes using the TV controls and menus may correct this problem 57 zi O a a D n a gt O O ct J 58 B Wii U GamePad screen The Wii U GamePad screen doesn t display anything Is the Wii U GamePad battery If the LED is blinking blue the screen has been turned off LED slowly blinking blue Press one of the buttons other than the POWER Button to turn the screen back on If you press the POWER Button with the AC adapter connected does the screen display turn on after a few seconds If the screen turns on the Wii U GamePad s battery level is low Recharge the battery If the screen still does not display anything contact Nintendo Customer Service for repair information Some pixels on the Wii U GamePad screen are always dark or lit Due to the characteristics of liquid crystal displays a small number of pixels may not illuminate or may always stay lit This is normal and not considered a defect unless the number of pixels that don t function normally increases over time can t use the Touch Screen or the Touch Screen does not respond properly Is there anything near the Wii U Avoid using the Wii U system near large metal objects or TV console or controller that could stands or devices that might cause electromagnetic interfere with the signal interference such as AV devices microwave ovens or between the two
24. cks p 48 If your Wii U system still does not operate correctly after trying the troubleshooting steps DO NOT return the console to the store You may lose saved game data Nintendo eShop downloads and any balance left in your Nintendo eShop account For assistance and additional troubleshooting and repair options visit support nintendo com or call 1 800 255 3700 Warranty and Service Information You may need only simple instructions to correct a problem with your product Try our website at support nintendo com or call our Consumer Assistance Hotline at 1 800 255 3700 rather than going to your retailer Hours of operation are 6 a m to 7 p m Pacific Time Monday Sunday times subject to change If the problem cannot be solved with the troubleshooting information available online or over the telephone you will be offered express factory service through Nintendo Please do not send any products to Nintendo without contacting us first HARDWARE WARRANTY Nintendo of America Inc Nintendo warrants to the original purchaser that the hardware product shall be free from defects in material and workmanship for twelve 12 months from the date of purchase If a defect covered by this warranty occurs during this warranty period Nintendo will repair or replace the defective hardware product or component free of charge The original purchaser is entitled to this warranty only if the date of purchase is registered at point of sale o
25. components cordless devices If the Touch Screen positioning appears to be off calibrate the Touch Screen in System Settings on the Wii U Menu Wii U GamePad If you are unable to operate the Wii U Menu properly using the Touch Screen use the Control Pad and A Does the Touch Screen need to be calibrated Have you attached a screen If a screen protector has been installed on the Touch protector optional accessory Screen incorrectly it may not operate properly Check for sold separately to the Touch the conditions listed below and if necessary try removing Screen it and using the Touch Screen again If it operates correctly either try reattaching the screen protector carefully following the instructions included with it or avoid using one e the screen protector is not aligned correctly e there are air bubbles dirt or dust trapped under the screen protector e the screen protector is wedged between the Touch Screen and the edge of the plastic housing NOTE If using an optional screen protector we recom mend using Wii U GamePad screen protectors that have been officially licensed by Nintendo IMPORTANT If the screen protector is misaligned remove it and reapply it again Do not try to force the misaligned part of the protector under the edge of the plastic housing The GamePad tone sounds and the screen comes on suddenly If you have selected to receive notifications in the Quick Start Menu the GamePad
26. connecting the NONChOK s cosclecrdeuaneeeeaeetiesusiase decries deentedons 31 System Configuration System SC UNOS cisne IA 32 Configuring SCHINGS riores Rae 32 User SCUINGS cactuyeeyectcusseseeeeseres ees hee A 33 Registering a Nintendo Network Dis visceral 33 Changing User Settings rusia in EE ASS AAA 34 Adding Switching USES gt ti EU AAA 34 Memet SeS eenas rr Pr euaut eee aaa e ene 35 Internet Connection Requirements onsrcvanjes rats cee as 35 Parental CONG erann eE ETEEN R ARG 37 Restrictiom OONONS risa AAA e 37 System Operations Playing Wii Software oct Tea EEE e 38 What You Will Need rito AA 38 Transferring Wii System Data sico ose TE e el ees oe 5 39 Data Yo Can Transfer avs scactnedetedeceode se rta 39 Preparing for Data Transfer ssicseastensietsustGurnesepeveuweuvaveseewesesueuades 40 Transter Procede vapor eienn ainsate aerae a aa i REEN a 40 Transferring Wii U System Data seocorrrnsrrrt ssrnr rte aa 43 Data You Can Transfers ccsss creso receso reidoat t tekkeni DENEA SAA REEERE E aS 44 Preparing for Data Transfer setas drop A ta 45 Transfer OCeCiNGs lt 255 o0 cna creo es rererere errre 46 Controller CaliDlauiGlica btettcieceecorss cren eeaeeusess 48 Calibrating the Touch Screen 6 25 si0ctsusceen tiara rear cowed ears 48 Resetting the L and R Control SuckSs056 vewsauing aora 48 Calibrating the Wii U GamePad Motion Sensor 22 e ee ee eee eee eee eens 48 Battery Replacement 44 ipirpinvaneeeue
27. ction as a button when pressed Control Pad Sensor Bar Works with a Wii Remote controller sold separately when used to interact with the Wii U GamePad this feature works with compatible software only NOTE When using a Wii Remote controller with software displayed on the TV screen a sensor bar must be installed p 26 Camera A B X Y Buttons R Stick e Can also function as a button when pressed E Button START Button SELECT Speakers POWER Button Press to turn the Wii U GamePad and Wii U console on or off p 22 E TV Control Button Press to switch to the TV Remote Features screen Allows input to your TV DVD recorder or cable or satellite TV tuner p 22 Battery LED Indicates charging status and remaining battery life p 19 E HOME Button Displays the HOME Menu where you can configure the Wii U GamePad and Wii Remote controllers or view electronic manuals See the Wii U Electronic Manual J on the HOME Menu e You can press the HOME Button to turn the Wii U GamePad and Wii U console on p 22 You cannot turn the power off with the HOME Button e The HOME Button will flash when you receive a notification when you receive a Wii U Chat message or when a friend is online see the Wii U Electronic Manual E Friend List 1 Microphone D Touch Screen D NFC near field communication location Built in NFC feature allows the system to read or write to an enabled card or
28. d through the wrist strap Hold the remote firmly during use O D o 2 Slide the strap lock up so that the strap will not fall off your wrist Close the lever to hold the lock in place 29 C 2 J Q A D a O et D Q O 3 c 2 D n 30 Using the Nunchuk The Nunchuk is an optional accessory for the Wii Remote sold separately IMPORTANT Before using the Nunchuk accessory be sure to review Health and Safety Information on the Wii U Menu e The Nunchuk can only be used with a Wii Remote controller and with games that include compatible features Review the instructions for the game you are playing for more information Be sure to install the Nunchuk as described Use the connector hook on the Nunchuk plug with the wrist strap cord to prevent the Nunchuk plug from becoming separated from the external extension connector on the remote and striking objects or people amp Feed the cord on the wrist strap through the connector hook on the Nunchuk plug as shown 2 Insert the Nunchuk plug into the connector on the bottom of the remote until it snaps into place E Open the lever on the strap lock and place your hand through the wrist strap Slide the strap lock up so that the strap will not fall off your wrist Close the lever to hold the lock in place Hold the Wii Remote controller firmly during use Disconnec
29. dengeesjawewae neces ss keh meee ew auaus 49 E AC ae ace eee ge E O E 49 Wii U Pro COMM OI El ein o s a yeaa clean a oa 51 Wil U CONSOlE ccch46305ayenbousene erase hh A de 53 Consumer Information MOUDIESHOOUNG 22220cAtr rbracaanaenakanccadoreenerwdeeokeeanesenaseus 54 Warranty and Service Information 2 3920 0d AAA 61 Regulations for Equipment Us 42242454 5604666484 8ee eddie w see eweennnnbers 62 Health and Safety Information Before using the Wii U system read the following important health and safety information and be sure to read the information in the Health and Safety application available on the Wii U Menu screen This application also contains important usage guidelines for Wii U compo nents and accessories Important Safety Information Read the following warnings before setup or use of the Wii U system If this product will be used by young children this manual should be read and explained to them by an adult Failing to do so may cause injury Please carefully review the instructions for the game you are playing for additional health and safety information Throughout this manual you will see this symbol A followed by WARNING or CAUTION or you may see the term IMPORTANT These terms have different levels of meaning as outlined below Please read and understand these terms and the information that appears after them before using your Wii U system WARNING Warns you about incorrect use of this system that could resu
30. dinitis carpal tunnel syndrome skin irritation or eyestrain e Avoid excessive play Parents should monitor their children for appropriate play e Take a 10 to 15 minute break every hour even if you don t think you need it e If your hands wrists arms or eyes become tired or sore while playing or if you feel symp toms such as tingling numbness burning or stiffness stop and rest for several hours before playing again e If you continue to have any of the above symptoms or other discomfort during or after play stop playing and see a doctor AXCAUTION MOTION SICKNESS Playing video games can cause motion sickness in some players If you or your child feels dizzy or nauseous when playing video games stop playing and rest Do not drive or engage in other demanding activity until you feel better AAWARNING ELECTRIC SHOCK To avoid electric shock when you use this system e Do not use the Wii U system during a lightning storm There may be a risk of electric shock from lightning e Use only the AC adapter that comes with your system e Do not use the AC adapter if it has damaged split or broken cords or wires e Make sure that the AC adapter cord is fully inserted into the wall outlet or extension cord e Always carefully disconnect all plugs by pulling on the plug and not on the cord Make sure the Wii U power button is turned OFF before removing the AC adapter cord from an outlet AXWARNING RADIO FREQUENCY INTERFERENCE
31. do eShop see information below ap Source console Target console From the Wii U Menu open System Settings and tap System Transfer Transfer Between Wii U Systems baton MMU O Remove the SD Card from the source console and insert it into the target console The data from the source console that was moved O Target console Saens to the SD Card will be saved to the target console eo ransfer Between l Select Transfer Between Wii U Co nsoles promenon s p der ll Read the precautions on the screen carefully and uO When the data is finished being saved to the target Wii U console the System Transfer is follow the on screen instructions The space required on the SD Card for the transfer is If a USB storage device was used with the source console it can be used as is on the target displayed after Step 3 console Source console Target console sse 2 17 gt Two Wii U consoles are required to perform a system transfer Which role will this console play e To use controllers that were paired with the source console you must first pair them with the target Please be sure to select the correct role console complete and you can now play disc based or other software titles 3 F 5 D T T S G C A 2 pe 2 O O 3 3 U y y w w e The data that was saved on the SD Card from the source console is deleted once the System Transfer is completed Confirm which console is the
32. end List application When you register a Nintendo Network ID a will appear on your Mii character icon Nintendo Network ID registration and access to f S Not registered certain Wii U features Purchase history of downloaded Friend DET u istory of downloaded games Frien No ES management ie Use of services and features that require registration No Play History Save Data Mii Management Yes 33 C n D N D g m Q n 34 Changing User Settings Select the option you would like to change on the User TPE Settings screen and follow the on screen instructions 3 ae Gea e When you change your Nintendo Network ID information on the Wii U system information for the same ID ona system in the Nintendo 3DS family will E Nintendo Network ID Settings also ch ange Change User Information Switch User e When you delete a Nintendo Network ID information such as your Nintendo eShop balance will also be deleted and you will no longer be able to use that ID on another system For more information refer to Additional User Information in the Health and Safety application available on the Wii U Menu Adding Switching Users If more than one person will be using the Wii U system EEEE you can add additional users From the User Settings Fn EEE screen tap Switch User and then follow the on screen instructions 9 9 Switch User e You can have a maximum of 12 users on a single Wii U EX Nintendo Network ID Settings conso e Change Use
33. fer steps There are two ways this can be done e Use the input select of the TV to switch between the two systems or e Plug the standard AV cable that came with your Wii console into your TV and swap the cable between the two systems during the transfer process Swap the cables at the same time you are swapping the SD Card IMPORTANT To avoid loss of data or damage to your system or components do not remove the SD Card turn off the console or unplug the AC adapter during the transfer process See the following pages for step by step instructions on transferring system data Q anf Select the Wii Menu icon on the Wii U Menu NOTE You will need to pair synchronize a Wii Remote with your Wii U console to launch the Wii Menu p 25 Select Wii System Transfer This will download the channel required for the transfer Wii System Transfer and add the icon for this channel to the Wii Menu e Choose Wii System Memory as the destination for the download Select the new icon for Wii System Transfer on the Wii Menu Insert the SD Card you will be using for the transfer into the Wii U console Read and follow the on screen instructions carefully Information about the Wii U console necessary for transfer will be saved on the SD Card Change the TV input from the Wii U system to the Wii system NOTE If you are using only one Wii Remote you will now need to pair synchronize yo
34. headphones are connected no sound will play through the speakers AC Adapter Connector For connecting the Wii U GamePad AC adapter p 18 EZ GamePad Support Hand Grips E Battery Cover You can remove the cover if you need to replace the Wii U GamePad battery p 49 e Do not remove the cover unless you need to replace the battery or check battery installation SYNC Button Press this to pair the Wii U GamePad with the console p 25 A Charging Terminals These contact the terminals on the cradle when charging 29 Accessory Connector For connecting external accessories to the Wii U GamePad W lt wn 3 O O 3 D O 5 D 5 ct wn 13 Un lt Un 3 O O 3 D O 5 D 5 ct wn 14 Wii Remote Plus Controller sold separately This controller only works with Wii software as well as Wii U software that supports Wii Remote gameplay see game packaging for compatibility information This controller can be used with the Wii Menu feature of your console Front and Back View This view shows the battery cover removed Pointer Lens POWER Button Press to turn the Wii U console or Wii U GamePad on or off Control Pad A Button Button HOME Button Displays the HOME Menu where you can configure the Wii U GamePad and Wii Remote controllers or view pre installed electronic manuals See the Wii U Electronic Manual E on the HOME Menu
35. his device may not cause harmful interference and 2 this device must accept interference received including interference that may cause undesired operation Changes or modifications not expressly approved by the manufacturer could void the user s authority to operate this device This equipment has been tested and found to comply with the limits of a Class B digital device pursuant to part 15 of the FCC Rules and the Canadian ICES 003 Class B specifications These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician or call Nintendo Consumer Service at 1 800 255 3700 for assistance The user
36. ired to the Wii U console p 25 e A sensor bar connected to the Wii U console p 26 NOTE You may need additional controllers or accessories to play some games See the game manual for more information Displaying Wii Games on the Wii U GamePad Screen You can use either the TV screen or the GamePad screen to display Wii software When playing software on the GamePad screen point the Wii Remote toward the sensor bar on the GamePad For more information see the Wii U Electronic Manual EJ Wii Menu Sensor bar To Quickly Switch to the Wii Menu Press on the Wii U console to turn the power on When you see the Wii U logo on the TV screen press and hold the B Button on the Wii U GamePad This will take you directly to the Wii Menu To Turn the GamePad Screen On or Off When you are using the Wii Menu or playing Wii software you can press the POWER Button on the GamePad to turn the GamePad screen off NOTE If you press the POWER Button when playing Wii U software or using other Wii U features you will turn the Wii U console off Transferring Wii System Data You can transfer software saved game data and other data from your Wii console to your Wii U console You will need the following items before transferring e Operational Wii U and Wii systems and two Wii Remote controllers one paired with the Wii console and one paired with the Wii U console p 25 e An SD or SDHC Memory Card SD Card with at
37. least 512 MB of free space e A broadband Internet connection both systems must be connected to the Internet e See the Wii Operations Manual Channels amp Settings for details on Internet connections for the Wii console IMPORTANT Transferred data is permanently deleted from the Wii console Once you have transferred data to the Wii U console it cannot be transferred back to a Wii console Data cannot be transferred from your Wii U console to a Wii console Data You Can Transfer You can transfer the following data only All data that can be transferred will be transferred at one time so you are unable to select which data to transfer Some content may not be transferable but will still be available on the Wii console after the transfer procedure Visit support nintendo com wiiu transferdata for more information e Wii Software Save Data e WiiWare and Save Data e Virtual Console titles and Save Data e Add on Content Wii Software e Wii Points e Wii Shop Channel Account Activity Wii Shop Channel 1 If save data is stored on an SD Card transfer it to the Wii console s system memory before beginning the transfer process 2 Preinstalled software cannot be transferred Visit support nintendo com for more information 3 Any Wii Points you have purchased will be added to the balance in the Wii Shop Channel accessed from the Wii Menu application on the Wii U console Transfer is not possible if the combined
38. ler to finish the pairing procedure You can pair up to 10 controllers with the console If you pair additional controllers the oldest controller pairing data is deleted and replaced by the newest data The Player LED on the controller will light up when pairing is complete The Player LED indicates the lt player number of the controller currently in use ie 2P 3P 4P Player LEDs on a Wii Remote Pairing Procedure for the Wii U GamePad To pair a Wii U GamePad first open the Wii U Menu Press SYNC on the front of the Wii U console TWICE then press SYNC on the Wii U GamePad Follow the on screen instructions entering the graphic symbols as described a ov 5 5 O O 5 ct R o o D n 25 C 2 3 o po D 3 O e D Q O J c a D Ma n 26 Sensor Bar Placement Guidelines Using Wii Remote Controllers B Center the sensor bar IMPORTANT Before using Wii Remote or Wii Remote Plus controllers be sure to review with the TV screen facing Health and Safety Information on the Wii U Menu straight ahead e Do not place the sensor bar over air vents on the TV To use software that is compatible with Wii Remote controllers you must first install the included sensor bar as described below Some software titles do not require a sensor bar Installing the Sensor Bar 0 Connect the sensor bar to the Wii U SENSOR BAR console seis the sensor b
39. lowing NOTE If you are using a bridge modem that does not include any router functionality you will also need a separate broadband router Parental Controls can limitthe download and use of 3 c certain content on the Wii U system Parental Controls can a x W y E wi E Wii LAN Adapter sold separately also limit the use of certain Wii U system features a M This connects to the Internet using a cable connection See the LAN e When Parental Controls are enabled some System alls A adapter manual for information on how to connect the LAN adapter Settings such as Internet Settings System Transfer and Format System Memory cannot be accessed You will DG TA need to enter the PIN to access these features Wirel LANA Point sold tely IMPORTANT A parent or guardian should configure the Parental Controls settings Ireless ccess FOINt sola separate gt p y Use an access point that supports the 802 11n 802 11g or 802 11b standard to connect to the Internet wirelessly PIN for Identification Sn ieee aoe Make sure to not forget the PIN and answer to the secret Setup can be simplified if you use an access point that includes one of the gt question that you create when setting Parental Controls If you SSI features do forget these tap I Forgot in the upper right corner of the l screen and follow the instructions displayed CM AOSSTM GE Wi Fi Protected Setup AOSS e Visit support nintendo com for a
40. lt in serious personal injury CAUTION Cautions you about incorrect use of this system that could result in personal injury or damage to the system components games or accessories IMPORTANT Informs you about incorrect use of the system that could result in damage to the system components games or accessories ARWARNING SEIZURES e Some people about 1 in 4000 may have seizures or blackouts triggered by light flashes or patterns and this may occur while they are watching TV or playing video games even if they have never had a seizure before e Anyone who has had a seizure loss of awareness or other symptom linked to an epileptic condition should consult a doctor before playing a video game e Parents should watch their children play video games Stop playing and consult a doctor if you or your child has any of the following symptoms Convulsions Eye or muscle twitching Loss of awareness Altered vision Involuntary movements Disorientation To reduce the likelihood of a seizure when playing video games Sit or stand as far from the screen as possible Play video games on the smallest available television screen Do not play if you are tired or need sleep Play in a well lit room oa AUN Take a 10 to 15 minute break every hour RWARNING REPETITIVE MOTION INJURIES AND EYESTRAIN Playing video games can make your muscles joints skin or eyes hurt Follow these instruc tions to avoid problems such as ten
41. ly works with Wii U software that supports Wii U Pro Controller gameplay see game packaging for compatibility informa tion This controller can be used with the Wii U Menu and for Wii U system operations Front View Back View i me ws O L Stick e Can also function as a button when pressed L amp ZL Buttons E USB Port Connects to the USB cable for charging the controller p 20 Battery LED Indicates charging status and remaining battery life p 21 R amp ZR Buttons RStick e Can also function as a button when pressed E Button SELECT HOME Button Displays the HOME Menu where you can configure or check the battery life of the Wii U Pro Controller or view pre installed electronic manuals See the Wii U Electronic Manual E on the HOME Menu Button START D A B X Y Buttons Player LEDs Indicates the player number assigned to the controller currently in use POWER Button Press to turn the Wii U console or Wii U GamePad on or off p 22 E Control Pad Battery Cover You can remove the cover if you need to replace the rechargeable battery p 49 e Do not remove the cover unless you need to replace the battery or check battery installation D SYNC Button Press this to pair the Wii U Pro Controller with the console p 25 D RESET Button Press to reset the controller to default settings Un lt Un 3 O O 3 D O 5 D 5 ct
42. n It is not compatible with any other Nintendo product Do not use the AC adapter with voltage transformers dimmer switches or any other equipment It is only for use in a standard household AC outlet e Remove covers or other accessories from the Wii U GamePad before charging e Be sure the AC adapter connector plug is facing in the correct direction before inserting it into the AC adapter connector on the controller e Insert the AC adapter connector plug straight all the way into the AC adapter connector e When disconnecting any plugs from the controller charging cradle or wall outlet carefully pull by the plug itself rather than by the cord Estimated Charging Time and Battery Life e Charging Time approx 2 5 hours Charging time will vary depending on how the system is being used and how much charge is left in the battery e Battery Life approx 3 5 hours Actual battery life depends on the screen brightness the features used such as the camera or microphone wireless communication use ambient temperature and other factors e The screen brightness is set to 4 by the manufacturer You can change the screen brightness from the HOME Menu in Controller Settings Power Saving Mode Power saving mode increases battery life by automatically adjusting screen brightness and color based on what is being displayed at the time You can enable power saving mode from the HOME Menu in Controller Settings Wii U GamePad Ba
43. n removing batteries remove the positive end first e Do not use damaged deformed or leaking batteries e Do not dispose of batteries in a fire The Wii U console contains a lithium coin cell battery Contains perchlorate material special handling may apply For more information visit www dtsc ca gov hazardous waste perchlorate Do not remove the battery from the Wii U console unless it needs to be replaced PRECAUTIONS WHEN USING AC ADAPTERS Please read and follow the precautions listed below when setting up and using the Wii U system Failure to do so may result in damage to your Wii U system or accessories e Plug the AC adapter into an easily accessible standard wall outlet near your Wii U system e Make sure there is adequate ventilation around the AC adapter and Wii U system and that any air vents are unobstructed e Do not expose the AC adapter or Wii U system to extremes of heat e Do not expose the AC adapter or Wii U system to any type of moisture e Do not place objects filled with liquids on or near the AC adapter or Wii U system See the bottom of the AC adapter for additional information eee eee eee eee eee see ee eee eee eee eee eee eeee see eee ee esses e eee eee eee eee eseseeeZeeeeeeseee sons s poso cs cs s css css o o oooo o o o System Components POWER Button Press to turn the Wii U console on or off Power LED Wii U Console Indicates the status of the console p 22 Blue Power is on A O
44. nment Excluding When this setting is enabled before any non game software not e Check for metal objects or electronic devices that may be close to your access point or CARES covered by its own parental control starts you will see a description Wii U console Objects such as metal filing cabinets speakers power strips or cordless of the software and be offered a chance to lock or unlock it for the phones can interfere with wireless signals and should be moved further away if current user with the Parental Controls PIN possible Data Management Restricts the deletion or moving of software or save data using Data Management Access point Wii U console GamePad Internet Settings Restricts the addition modification or deletion of Internet settings gt a e Some features such as User Settings p 33 Format System Memory and Wii U Chat are More than 6 5 Less than 26 restricted automatically e The Wii U Menu and the Wii Menu have different restriction options 36 37 Y D lt 5 Q Wn O D s D 38 Playing Wii Software You can play Wii software Wii Game Discs WiiWare or Wii Virtual Console titles from the Wii Menu NOTE You cannot play Wii software using the Wii U GamePad or Wii U Pro Controller What You Will Need You will need the following accessories sold separately to play Wii software on the Wii U system e A Wii Remote or Wii Remote Plus controller that has been pa
45. o po D 3 O e D Q O J c a D Ma n Using the Wii Remote Jacket e Be sure that the Wii Remote Jacket is installed prior to gameplay to reduce the risk of harm to the remote surrounding objects or people It might be necessary to remove the Wii Remote Jacket for example to replace the batteries in the Wii Remote controller If you do remove the Wii Remote Jacket be sure to put it back on before further play Installing Batteries in the Wii Remote amp Pull the jacket from the base of the controller and pull the wrist strap out E Pull the jacket up to expose the entire battery cover and remove the cover E Insert the batteries negative end first When removing batteries re move the positive end first Ed Replace the battery cover and pull the wrist strap back through the hole in the bottom of the jacket Pull the jacket back over the base of the controller 28 If you completely remove the jacket replace it by inserting the controller as shown pushing it all the way into the top of the jacket e Be sure to thread the wrist strap back through the hole in the bottom of the jacket as shown in step 4 O Insert the connector cover into the external extension connector on the bottom of the controller 5 2 a Wearing the Wii Remote Wrist Strap gt D 3 Open the lever on the strap lock and place your han
46. on the Wii U console when software is being downloaded or installed this feature automatically finishes the download and installation and then turns the console off NOTE This mode is disabled by default This can be changed in System Settings on the Wii U Menu Power Settings If you enable this feature software will not be automatically downloaded or installed if either of the following occur e The power is turned off by holding down the POWER Button for at least four seconds e The AC adapter is disconnected after turning the power off Power LED Color and Wii U Console Operations If you enable Standby Functions the power LED on the Wii U console will change from red to orange at fixed intervals after the power is turned off The system is checking for updates or software to be downloaded or installed If such data is found the remaining downloads or installations will be performed The Power LED will turn red again after they have been completed e Initially the interval for Standby Functions the time the LED remains red is set to one hour This can be changed in System Settings on the Wii U Menu Power Settings Power LED is blue M 0 Power LED is red MN POWER Power LED is orange ON _ SSS a OFF S Receiving Notifications If you go to Power Settings under System Settings on the Wii U Menu and select Quick Start Menu gt Wii U GamePad Alerts gt Yes a tone will sound on the Gamepad
47. osition and simultane ously hold down A B E and for at least three seconds Calibrating the Wii U GamePad Motion Sensor When using software you may notice that the screen or cursor is moving when you are not touching the GamePad or that movements on the screen do not correspond to the way you are operating the GamePad The motion sensor may need to be re calibrated Open the HOME Menu then simultaneously hold down and B on the GamePad for three seconds When the calibration screen appears lay the GamePad down flat on a level surface then select either Calibrate or Revert to Defaults Remove the battery cover Lift the edge of the battery cover slightly and then remove it as shown below e If you select Calibrate the orientation of the GamePad when you tapped the button will be treated as level 48 49 O Remove the battery Wii U Pro Controller Using your fingers only in the area marked with Y unplug the connector first and then remove the battery as shown below Do not use any battery other than the Wii U Pro Controller rechargeable battery e When disconnecting the battery cable pull by the plug not the cable Model No CTR 003 e Please recycle the used battery p 52 A replacement battery can be ordered from the Nintendo website at store nintendo com USA Canada only or by calling Customer Service at 1 800 255 3700 e Before replacing the battery turn the Wii U console power off and
48. ou set the audio output From the Wii U Menu System Settings choose TV gt TV to Non HDMI When no Audio Output Type gt Output Cable Settings and select external audio devices are HDMI being used Are you using any accessories Remove any unlicensed or incompatible components or not licensed by Nintendo or accessories from your system not designed for use with the Wii U system Sound cannot be heard from external speakers when Surround is selected in System Settings Is an audio amplifier connected Make sure your amplifier supports surround sound See to the Wii U console Connecting Audio Equipment in the Wii U Electronic NOTE You cannot use Manual for more information on connecting audio Surround as your sound amplifiers setting if you do not have an audio amplifier connected to your console e If you are not using an external amplifier select Stereo or Mono in System Settings gt TV gt TV Audio Output Type Bunooysa qnoJ I want to use audio equipment amplifier or speakers with the Wii U system See Connecting Audio Equipment in the Wii U Electronic Manual for more information on connecting audio amplifiers and refer to the operations manuals for your audio equipment The TV screen doesn t display correctly Does the image on the TV Adjust the screen size in System Settings on the Wii U screen run off the edges of the menu TV display Some TVs have display modes th
49. over Wii U Console After replacing the battery cover tighten the screw being careful not to overtighten it The Wii U console uses a lithium coin cell battery Contains perchlorate material special handling may apply For more information visit www dtsc ca gov hazardouswaste perchlorate IMPORTANT Always be sure to replace the battery cover and tighten the screw before resuming use e Do not remove the battery from the Wii U console unless it needs to be replaced if the console clock stops functioning amp gt Make sure that the disc LED is not on If the disc LED is illuminated press C on the front of the console to eject the Game Disc ES Turn the power off and unplug the AC adapter PLEASE RECYCLE YOUR USED BATTERIES Make sure the power LED is off and then unplug the AC adapter from the wall outlet gJ gJ z When disposing of a rechargeable battery take care to Turn the console over and remove the battery cover 4 D follow appropriate local guidelines and regulations l l o lt C TE pares ee lear cine ee i The battery cover is designed so the screw can be loosened but not fully removed lt x over the terminals with tape before recycling z y Do not disassemble attempt to repair or deform the NOTE To avoid damage to the screw or threads use a screwdriver that is appropriate 2 D ETER E for the screw crosshead style size 0 a O S e Do not dispose of rechargeable batteries in a fire S
50. perature The Wii U console won t turn on Are the DC and AC plugs of Check the connections to make sure they are fully the AC adapter fully inserted inserted see the Wii U Quick Start Guide Is the Power LED of the Wii U If the Wii U console s power LED does not turn on even console lit after pressing the Power Button unplug the AC adapter from the wall wait two minutes and plug it in again e If the power LED is blinking red unplug the AC adapter from the wall Make sure that the console is not in a location where itis exposed to high temperatures and that it has proper ventilation at least 4 10 cm Wait about two minutes then plug the AC adapter back into the outlet and turn the console power on e If the power LED is blinking blue contact Nintendo Customer Service see contact information above The Wii U GamePad won t turn on Is the battery depleted e Recharge the Wii U GamePad p 18 e If the battery LED blinks orange during charging or if the problem continues even after charging remove the battery from the GamePad and wait at least 10 seconds then reinsert the battery and try turning the GamePad on again p 49 Is the battery correctly installed The Wii U console or Wii U GamePad feel hot to the touch Is the system or controller Such use can cause the system to become hot Use the sys exposed to high temperatures tem and components within the following temperature or is the controller
51. point total would exceed 10 000 Wii Points 4 Mii characters are moved to the Mii Channel accessed from the Wii Menu application on the Wii U console Downloading Software That Has Been Deleted or Moved From a Wii U Console If you delete software purchased from the Wii Shop Channel or move it to an SD Card the software will still be available for download in the Wii Shop Channel on the Wii Menu of Wii U You can download it again from the Wii Shop Channel at no cost w 5 n 9 p 5 Q N lt n e 9 3 U v et v 39 w 3 1 a 9 3 3 o UN lt 1 9 3 U w w 40 Preparing for Data Transfer TZ Checking Your Connections Make sure your Wii U console Wii console and sensor bar are all set up correctly and that both consoles are able to connect to the Internet In the illustration below both consoles are connected to the same TV Sensor bar console Wii AV or HDMI or other cable other cable Linking a Nintendo Network ID Before you can transfer data you will need to create a Nintendo Network ID and link it to your Wii U user p 33 Also see the Wii U Electronic Manual E User Settings for additional information Mii character icon of the current user Transfer Procedure Both systems must be connected to a TV If both systems are connected to the same TV you will need to switch between the two systems as you go through the trans
52. r Information e You can also add users from the User Selection screen that appears after you turn the power by pressing on yp the Wii U console E Add New User Start with This User A E ca 24 9 9 4 zo IN J e Nintendo Network ID amatm 4 0700 Internet Settings Connect to the Internet to download software not available in a stores and play online with people around the world Internet Connection Requirements What you will need depends on your household environment Do you have a high speed broad band Internet connection such as cable or DSL J Nor Do you have a wireless network Set up a broadband Internet connec environment a wireless LAN tion environment see below access point D 3 Yes NX No y D a 2 Does your wireless LAN access point Install a Wii LAN Adapter RVL 015 0 support the 802 11n 802 11g or see next page 802 11b standards Yes NX No Configure your Internet connection Install an access point that supports settings under Internet in System the 802 11n 802 11g or 802 11b Settings on the Wii U Menu standards see next page Broadband Internet Environment There may be several options to get a broadband connection to your home Cable DSL and optical fiber networks are among the most common Check with your local broadband providers for more information 35 Communication Device Wired or Wireless Pa rental Co ntrols You will need one of the fol
53. r the consumer can demonstrate to Nintendo s satisfaction that the product was purchased within the last 12 months GAME amp ACCESSORY WARRANTY Nintendo warrants to the original purchaser that the product games and accessories shall be free from defects in material and workmanship for a period of three 3 months from the date of purchase If a defect covered by this warranty occurs during this three 3 month warranty period Nintendo will repair or replace the defective product free of charge SERVICE AFTER EXPIRATION OF WARRANTY Please try our website at support nintendo com or call the Consumer Assistance Hotline at 1 800 255 3700 for troubleshooting information and repair or replacement options and pricing In some instances it may be necessary for you to ship the complete product FREIGHT PREPAID AND INSURED FOR LOSS OR DAMAGE to Nintendo Please do not send any products to Nintendo without contacting us first WARRANTY LIMITATIONS THIS WARRANTY SHALL NOT APPLY IF THIS PRODUCT a IS USED WITH PRODUCTS NOT SOLD OR LICENSED BY NINTENDO INCLUDING BUT NOT LIMITED TO NON LICENSED GAME ENHANCE MENT AND COPIER DEVICES ADAPTERS SOFTWARE AND POWER SUPPLIES b IS USED FOR COMMERCIAL PURPOSES INCLUDING RENTAL c IS MODIFIED OR TAMPERED WITH d IS DAMAGED BY NEGLIGENCE ACCIDENT UNREASONABLE USE OR BY OTHER CAUSES UNRELATED TO DEFECTIVE MATERIALS OR WORKMANSHIP OR e HAS HAD THE SERIAL NUMBER ALTERED DEFACED OR R
54. range Power is off software download or installation is in progress Front View showing the slot cover open E EJECT Button Press this button to eject discs Disc LED Lights up when a disc is inserted into the console Disc Slot For inserting a Wii U or Wii Game Disc Wn n lt o lt a Wii SYNC Button A 3 Press this to pair synchronize the Wii U GamePad Wii U Pro Controller sold separately 3 O or Wii Remote Plus controller sold separately with the console p 25 Q 3 3 E SD Card Slot pS 5 For inserting SD Cards sold separately see the Wii U Electronic Manual J Using 5 D D SD Cards 3 N n USB Ports For connecting USB devices sold separately devices may be marked with lt gt see the Wii U Electronic Manual E Using USB Devices Battery Cover A coin cell battery CR2032 is included e See the Battery Leakage warning in Health and Safety Information p 6 for important information about this battery e Do not remove the battery from the Wii U console unless it needs to be replaced Right side view Back View Air Intake AC Adapter Connector D AV Multi Out Connector D Sensor Bar Connector SENOR BAR HDMI Port AVMULTI OUT AC AL PTER Air Vent U lt Wn 3 O O 3 D O 5 D 5 ct wn 10 Wii U GamePad Front View E ier Y ms EII L Stick e Can also fun
55. reen properly use the Control Pad and A Do not use any battery other than the Wii U GamePad Battery Model No WUP 012 a A replacement battery can be ordered from the Nintendo website at store nintendo com HOME Button LED Setings USA Canada only or by calling Customer Service at 1 800 255 3700 Microphone Test e Before replacing the battery turn the power off and disconnect the AC adapter if it is connected to the controller Turn off the Wii U console and the Resetting the L and R Control Sticks GamePad If the Wii U console Power LED is blue hold down the POWER Button on the GamePad to turn off both the console and the GamePad The neutral position of the control sticks can be incorrectly set if you move them during the following actions juauwsae doy Aiayeg O O 5 ct a o o L O 2 O o mp O 5 e turning the console on e launching software e L the batt oosen tne battery cover screws e quitting software and returning to the Wii U ry Menu The battery cover is designed so the screws can be loosened but not fully removed This can cause erratic gameplay control or cause objects on the screen to move when you are not using the controller Wii U GamePad L Stick NOTE To avoid damage to the screw or threads use a screwdriver that is appropriate for the screw crosshead style size 0 E Reset Procedure To reset the control sticks allow them to return to a neutral untouched p
56. screen you can temporarily turn it off to save battery life To turn off the screen go to the HOME Menu and tap Controller Settings NOTE The battery LED will flash slowly when the screen is turned off Turning the Power Off Press on the Wii U GamePad for one second When the power is off the power LED on the Wii U console will turn from blue to red and the GamePad screen will turn off e The power can also be turned off by pressing on a Wii Remote or Wii U Pro Controller or on the Wii U console e The power LED does not turn off when the console turns off unless the console is unplugged from the wall outlet e You cannot turn off the power using the GamePad if you are using the Wii Menu or a Wii Game Disc Precautions when turning the power off and then on again To avoid damage to your console when turning the power off wait at least four seconds after the Power LED turns red before turning the power back on Automatic Power Off Feature The Wii U console can be set to automatically turn off if it is unused for a certain amount of time You can configure this feature in System Settings on the Wii U Menu Automatic Power Off e This feature has been set by the manufacturer to turn off the system after one hour 23 z A 2 O cr gt D y O 0 O gt SW O z gt O ctr 2 D T O 0 O gt N O S 24 Standby Functions If you turn the power off
57. the recommended temperature range of 50 95 F 10 35 C Over time and repeated charging battery performance will gradually decrease If the usage time has gotten noticeably shorter the battery may need to be replaced p 49 The battery appears slightly swollen Due to the nature of lithium ion batteries repeated charging and use over time can cause the battery pack to swell If the battery pack is swollen and battery duration doesn t last very long it should be replaced p 49 If the battery leaks fluid or is exposed to moisture see the Battery Leakage warning in Health and Safety Information p 6 and contact Nintendo Customer Service for repair information TV screen display and audio The TV screen doesn t display anything or there is no sound Is the video cable completely Check the video cable connections plugged in at both ends Use the Wii U GamePad and check the configuration in System Settings on the Wii U Menu TV for your cable and TV combination and reconfigure if necessary Have you changed your equipment such as the video cable or the TV the Wii U console is connected to Has the TV input been correctly set Press the input button on the TV several times to switch between inputs until the Wii U screen appears e Depending on the TV you are using it may take 10 seconds or more for the video output from the console to display Wait a short time after switching the input Have y
58. ting the Nunchuk Press the lock release levers on the sides of the Nunchuk plug as shown Pull the plug straight out of the connector on the bottom of the controller 31 G 2 J o 7 D 3 O e D Q O J c lt a D Nn n lt n et D 3 T D g 5 a Mm System Settings User Settings In System Settings you can configure many of the features of your Wii U system including connecting to the Internet or managing data or you can view information such as the system version of the Wii U console e System settings apply to all users You cannot set up different settings for each user Configuring Settings See the Wii U Electronic Manual EJ System Settings for more information on the settings that you can configure Settings category Tap to configure options for this category List of settings options within a category ao ce 400ve System version of console Connect to the Internet Es Find Recommended Connection Type View MAC Address Internet Automatic Software Downloads Icon list of settings categories Tap an icon to select a category or scroll between pages by sliding the stylus or tapping the page scroll arrow Descriptions of Settings The TV screen will display information about configuring the specific setting during the process Use the R Stick on the Wii U GamePad to scroll through the information on the TV screen 32
59. tone will sound and the screen will display a notification message e The screen will turn off automatically after a certain amount of time however you can turn it off immediately by tapping Close on the bottom left of the Notifications screen e The GamePad tone can be selected from the Settings option on the Quick Start Menu p 22 The Wii U GamePad screen appears irregular or erratic sound is intermittent Is anything blocking or interfer Remove possible causes of interference such as metal ing with the signal between racks or shelves or wireless devices microwave ovens or the console and the GamePad AV equipment The video or sound may cut off at times This is due to the nature of wireless communication and does not indicate a defective product The Wii U GamePad screen color changes the screen brightness changes erratically or bright colors cannot be seen When the power saving mode is on the system automatically adjusts the screen brightness and color to match the displayed image in order to reduce battery power use Depending on the image faint colors may look washed out or the color may appear to change For uniform brightness and hue open the HOME Menu and turn power saving mode off Is power saving mode on Wii Remote controllers can t use the Wii Remote or the Wii Remote does not respond properly Press one of the buttons on the Wii Remote not the POWER Button If the Player LED does not turn on
60. ttery LED Status The color and status of the LED changes depending on the remaining battery charge e If you run out of battery life while playing a game you will not be able to use the Wii U GamePad If the battery LED turns red charge the Wii U GamePad Full charge l Low Remaining battery life i l a I 1 Battery LED status A 1 BATTERY BATTERY BATTERY Off Steady red Blinking red 19 Q ey w s a 3 o e gt D C G w 3 D te o Q ey w Q 3 o ct gt D G V S O Q O 3 e a D 20 Charging the Wii U Pro Controller The Wii U Pro Controller is a dedicated wireless controller for the Wii U system This accessory is sold separately The battery LED will light orange when the battery is charging and turn off when charging is complete e Be sure to fully charge the battery before use for the first time or if the system has not been used for a long time e The Wii U console must be turned on to charge the controller e Optimal charging temperature is between 50 95 F 10 35 C e Before use with the Wii U system wireless controllers must be charged and paired with the console p 25 Charging Procedure Connect the Wii U Pro Controller USB cable included with the Wii U Pro Controller as shown below Make sure all plugs are inserted straight all the way into the connectors IMPORTANT To avoid dam
61. tton or HOME Button on the Wii U GamePad The Quick Start Menu will appear on the GamePad screen Icons of software you have recently played up to 10 will automatically appear on the Quick Start Menu allowing you to begin play immediately e To use the Quick Start Menu you must set Configure Standby Functions Setting and Configure Quick Start Settings to Enable under Power Settings in the System Settings p 32 e Icons of software that were installed while the console was turned off will also appear 8 O 0 gt wii alls Settings gt Wii U Menu If the console is set up to automatically select a user that user s Mii character will be displayed on the screen You can switch between users by tapping on the Mii character Turning the power on using Y TV Control Button on the Wii U GamePad Press 1 on the GamePad and then tap Play Wii U on the TV Remote Features Screen After the TV Remote Features Screen closes the Quick Start Menu will appear e The TV Remote feature allows you to control the TV using the GamePad See the Wii U Electronic Manual EJ TV Remote GUIDE POWER T2113 INPUT AN EST ES sa p01 eni Ie Turning the power on without using the GamePad Press on the Wii U console Wii Remote controller or Wii U Pro controller to turn the power on After a user is selected the Wii U Menu will appear Turning only the Wii U GamePad screen off If you are not using the GamePad
62. tual product may vary Contents Wi U System Manuals nervio seu a es 1 Types of Mantas osados 1 Viewing an Electronic Manual 0430 6202000064 4G hareseedeae reve dadeese neern 1 Health and Safety Information 0 2 cece cece eect eee e eens 4 System Setup System COMPONCING a cesees cee eens t rrer eee heehee ee eer estore anes 8 Charging the Vii Gamelan 6itc terre lesen eee tee ISA 18 Charging Options 544 lt 13 000dase gave AA AAA ee wees 18 Battery LED Status motas a nu ear ernie rti ot tae bese aw need 19 Charging the Wii U Pro Controller viveros ida 20 Charging Procedure senccsssreses resestir siten E nh to 20 Battery LED Sigs correa sadis ora di oda dos 21 T rning tweeter 22 Options for Turning the Power On 02 2 ccs cceasrsae rita 22 T rning the Power Off io 46 2 2n6nee eased ena ori aaia 23 Paling Controller res rondas EGO ade 25 Pairing Procedure tor Controllers s sococoosaro api ita a 25 Pairing Procedure for the Wii U GamePad o eorsressroriic pirita 25 Using Wii Remote Controllers ss c nheneeasadedsevadeeusserecedeeuenamien 26 Installing the Sensor Bai siciniasin daria ciedad dra adan anda 26 Recommended Play Environment rad iodrr rta ds 27 Using the Wii Remote Jacketosaa tantes arras divinas 28 Installing Batteries in the Wii Remote cece cece cee eee teenies 28 Wearing the Wii Remote Wrist Strap 00 ee eee cee eee eee n eens 29 Using the N nchuk sera daras napaa races AA 30 Dis
63. unlight behind or near the TV shining toward the remote or reflecting off the TV screen e Highly reflective surfaces near the sensor bar e Sources of infrared light in the gameplay area such as electric propane or kerosene heaters flames from fireplaces or candles and stoves or other sources of heat e Radio frequency interference may cause the Wii Remote to work erratically Check for and move or turn off wireless devices such as cordless phones wireless computer keyboards or mice or other similar devices Is the Wii Remote pointed at Point the Wii Remote at the front of the sensor bar the sensor bar when using If the Wii Remote does not operate normally after checking all of the above press the POWER button on the Wii U console for at least four seconds and make sure the Power LED is red and then unplug the Wii U AC adapter from the wall outlet Wait two minutes then plug the AC adapter back into the wall outlet turn the Wii U console power on and try using the Wii Remote again If the Power LED still doesn t turn red after pressing the POWER button for four seconds unplug the AC adapter form the wall outlet Other Wii U compatible controllers The cursor or character moves without controller input Are you using a controller that Check to make sure that the control stick is not out of includes an analog control alignment with the neutral position Review the instruc stick tions for how to reset control sti
64. ur Wii Remote with the Wii console Refer to the Wii Operations Manual System Setup for details w 3 UN 9 3 o UN lt 1 D 3 U se re 41 Transferring Wii U System Data O Launch the Wii Shop Channel on the Wii console and download the free Wii U Transfer Tool Select Start Shopping from the main menu You can find the Wii U Transfer Tool in the Wii Channels category You can transfer software saved game data and other data from one Wii U console to another Wii U console e Choose Wii System Memory as the destination for the download 573 Select Wii U Transfer Tool from the Wii Menu Source console Target console You will need the following items before transferring e The source Wii U console set and the target Wii U console set e An SD or SDHC Memory Card e A broadband Internet connection both systems must be connected to the Internet p 35 8 Move the SD Card from the Wii U console to the Wii console e A broadband router modem or wireless access point Wi Fi network e A Wii Remote or Wii Remote Plus 1 Read and follow the on screen instructions care fully The data being transferred from the Wii console will be saved on the SD Card Any downloaded content currently downloaded to the Wii system memory will be scheduled for redownload on the F a a z 3 a 3 5 3 2 gt L 2 Za A 9 9 3 3 U J y y
65. uthorized modification of the hardware or software of your Wii U system will be removed This product only plays Wii and Wii U Game Discs manufactured for use in the Americas This Wii U console is for use only in the Americas Elements of the Nintendo Wii U system and related network services are patented or patent pending both in the United States and internationally Patent patents nintendo com NOTE This product does not contain latex This product complies with applicable laws barring the use of toxic materials such as lead mercury cadmium hexavalent chromium PBB or PBDE in consumer products AOS S and AOSS are the trademarks of BUFFALO INC The Wi Fi Protected Setup icon is a registered trademark of the Wi Fi Alliance Trademarks are property of their respective owners Wii U is a trademark of Nintendo 2012 Nintendo Wii U System Manuals Printed manuals e Wii U Quick Start Guide This guide covers the basic information for setting up and using your Wii U system e Wii U Operations Manual this manual This manual gives the names of each component and describes how to recharge the controller configure System Settings and perform various procedures It also provides troubleshooting and support information Pre installed electronic manuals e Wii U Electronic Manual EJ This manual describes the Wii U features and gives detailed instructions on how to use the pre installed software how to launch the
66. w w If you cannot connect both consoles to the television at the same time connect the target Wii U console 2 The amount of free space required on the SD card depends on the amount of data saved on the source Wii U console The amount of data will be displayed on the GamePad before you insert the SD card maximum 32 GB Wii U system 3 Thisisa requirement if the console contains any Wii software data Save data that is not currently in Wii system memory will not be transferred e Wii Shop purchases that are not currently downloaded to the Wii system memory will be available for download on the Wii U system once the transfer has been completed Transferring Data from a Deluxe Set to a Basic Set The Wii U system is available in either a Deluxe Set or a Basic Set The consoles in either Change the TV input from the Wii system to the Wii U system system store different amounts of data If the amount of data to be transferred exceeds the capacity of the target console a separate external USB storage device sold sepa NOTE If you are using only one Wii Remote you will now need to pair synchronize ae aill banede your Wii Remote with the Wii U console 10 Move the SD Card from the Wii console to the Wii U console Visit support nintendo com for information about USB devices that are supported on the Wii U console Check the label on the bottom of each console for the memory capacity see illustration which will be either
67. wn 17 Q ey w a 3 o e gt D C G w 3 D se o 18 Charging the Wii U GamePad NOTE The AC adapters included with this system may be different from the ones pictured See the separate insert included in the package for more information The Wii U GamePad controller can be charged with either the AC adapter or with the AC adapter and Wii U GamePad cradle included in the Deluxe Set only See the illustrations below for connection details The battery LED will light orange when the battery is charging and turn off when charging is complete e Optimal charging temperature is between 50 95 F 10 35 C e Be sure to fully charge the battery before use for the first time or if the system has not been used for six months For important battery information please see page 56 e If you play a game while charging the battery LED may not always turn off once charging has completed Charging Options Using the AC Adapter and Wii U GamePad Cradle Deluxe Set only e Place the cradle on a flat stable surface during use Using the AC Adapter When charging is complete first unplug the AC adapter from the outlet then unplug it from the GamePad by pulling the AC plug straight out from the controller IMPORTANT e The Wii U GamePad AC adapter Model No WUP 011 USA is only for use with the Wii U GamePad or cradle see the separate insert included in the package for more informatio
68. word and email address Be sure to record this information before starting the transfer procedure NOTE If you forget your Nintendo Network ID you can verify it in User Settings p 33 If you forget your password tap I Forgot on the password entry screen and follow the on screen instructions Preparing for Data Transfer Checking Your Connections Make sure that both consoles are able to connect to the Internet on the same device broad band router modem or Wi Fi access point Check your Nintendo Network ID Before you can transfer data you will need to have a Nintendo Network ID linked to the source console p 33 NOTE You do not need to link a Nintendo Network ID to the target console before the data transfer Mii character icon of the current user 0 n D 3 E UN lt n D 3 U 0 0 45 Transfer Procedure O Insert the SD Card into the source The System Transfer procedure is performed on the Wii U GamePad for each console Wii U console IMPORTANT To avoid loss of data or damage to your system or components do not The data on the source console will be moved to remove the SD Card turn off the console or unplug the AC adapter during the the SD Card transfer process NOTE Software and data that was downloaded on the source console is not moved onto the SD Card After the transfer procedure is complete it is automatically downloaded at no cost from Ninten

Download Pdf Manuals

Related Search

Related Contents

Moxa CP-112UL-DB9M    VS Series Helium Mass Spectrometer Leak Detector  Ver Ficha Técnica    Magnese MA-101010  User Manual PDS2000 LiteView  Flex-race - Aeroplaine  Rod Desyne 4811-482 Installation Guide  PRO-SERIES PS07572 Use and Care Manual  

Copyright © All rights reserved. Failed to retrieve file