Access 4 “Instruction Manual”
Contents
1. D Lamp with flashing feature Telephone Ring Signaler Vibrator Jack Alarm Selector Flash Light on off 12 24 Hour Selector AC Input Auxiliary Jack Phone Line in 12 24 HOUR DISPLAY MODE Select the desired 12 or 24 Hour mode by using the HOUR switch located on the back of the unit POWER SOURCE AC Operation A plug in 9VAC 750 mA power supply included powers the clock Check to ensure that the voltage indicated on your power supply corresponds to the correct voltage of your area Connect the barrel plug of the power supply into the jack on the back of the unit marked AC 9V Connect the AC plug into a wall AC outlet near your bedside 12 00 12 hour display mode or 0 00 24 hour display mode will flash on the clock display When you set the time the display will stop flashing Battery Back up for Clock Memory Keeps the clock time running in the event of a short term AC power failure The LED Lamp can also be powered by the Battery back up The correct time will show when AC power returns if battery is not dead Note The clock display will not show the time during power outage Remove Cover from Battery Compartment located on back of unit by sliding the tab and lifting up Install 9 Volt Alkaline Battery not included into the battery compartment matching positive and negative markings and replace cover Replace battery as required Do not leave battery in compartment when unit not in us2. SNOOZE ALARM To activate the snooze feature press the SNOOZE button located on the front of the unit The alarm s will stop and re activate again in approximately 8 minutes This may be repeated TO STOP THE CLOCK ALARM Press the AL OFF Alarm Off button located on the front The Alarm Clock will remain set on standby to be activated again for the preset time the next day LED LAMP To turn on the LED Lamp press the LIGHT BUTTON located on the front Press again to turn off TELEPHONE RING SIGNALER Connect your telephone to the RJ11 jack at the back of the unit marked OUT With the telephone line cord provided plug one end into the second RJ11 jack marked IN and the other end of the cord into the wall phone jack ACCESS 4 will respond to the Telephone Ring with the functions that are set Select Light Audible and or Vibrate A green indicator light located on the front of the unit at the right of the time display will flash with each ring of the phone LIMITED WARRANTY ACCESS 4 is warranted to be free from defects in material or workmanship for One Year from the date of purchase This is a limited warranty and does not apply to the telephone line cord This warranty does not cover any unit which has been subject to misuse negligence or accident This warranty is void if the unit has been tampered with altered or repaired by other than a qualified service center At its option GLOBAL ASSISTIVE DEVICES INC may select to
3. e SETTING THE CLOCK TIME To set the Hour Press and hold the TIME button located on the front While you hold down the TIME button press the HOUR button until it advances to the correct hour Note For 12 Hour Display mode check that you have set correctly in AM or PM PM Indicator light green dot located at the top left of the clock display will illuminate when in PM time To set the Minutes Press and hold the TIME button located on the front While you hold down the TIME button press the MIN button until it advances to the correct minutes SETTING THE ALARM TIME To set the Hour Press and hold the ALARM button located on the front While you hold down the ALARM button press the HOUR button until it advances to the correct hour Note For 12 Hour Display mode check that you have set correctly in AM or PM PM Indicator light green dot located at the top left of the clock display will illuminate when in PM time To set the Minutes Press and hold the ALARM button located on the front While you hold down the ALARM button press the MIN button until it advances to the correct minutes To check the Alarm Set Time push and hold the ALARM button TO ACTIVATE OR DEACTIVATE THE ALARM S Slide the ALARM SELECTOR located on the back to the desired position of OFF AUDIBLE VIBRATE or ALL When you do not want the Alarm s to be activated example weekends Slide the ALARM selector to the OFF position Alarm ind
4. icator light will not be illuminated The Alarm Time will remain set for future use AUDIBLE position will activate the sound alarm VIBRATE position will activate the VIBRATOR jack and cause the connected Vibes Bedshaker to vibrate ALL position will activate the audible vibrate and flashing lamp If you do not want the lamp to flash slide the lamp switch located on the back top right of the clock to OFF Alarm indicator light marked AL located on the left of the clock display will illuminate when any mode of alarm is set ALARM ALERTING OPTIONS Audible You can select the Volume and Tone that you require or want by rotating the dials on each side of the unit VOLUME can be set from 0 dB no sound to 90 dB very loud Indicator dial on face of unit confirms setting TONE is adjustable from Low to High to provide you with the optimum results Vibration Connect a 12 Volt Bedshaker purchased separately to the back of the unit marked VIBRATOR Place the Bedshaker between your box spring and mattress or under your pillow When the alarm is activated the vibrations will alert you Flashing The LED lights will flash when the alarm is activated If you do not want it to flash slide the lamp switch located on the back top right of the clock to OFF
5. replace the unit rather than repair it During the warranty period return the unit with dated proof of purchase in a secure package insured and with shipping charges prepaid No C O D packages will be accepted Include a note describing the service required and include 9 95 check money order Visa Master Card American Express or Discover for shipping and handling within the U S A Other countries contact us for shipping and handling charges Disclaimer In no event shall Global Assistive Devices Inc be held liable for any special incidental indirect or consequential damages whatsoever including but not limited to damages for loss of property personal injury loss of privacy failure to meet any duty negligence and any other loss whatsoever however caused even if Global has been advised of the possibility of such damages This disclaimer of liability applies to any damages or injury including but not limited to those caused by any failure of performance of the product Responsibility for selection safety and suitability of any product rests with the consumer Circumstances or consequences arising out of or in any way related to the use of or inability to use our products is the responsibility of the consumer Global Assistive Devices Inc cannot be held liable in any way GLOBAL ASSISTIVE DEVICES INC 1121 East Commercial Boulevard Fort Lauderdale Florida USA 33334 Multi purpose Alerting Device Alarm Clock LE
Download Pdf Manuals
Related Search