User manual 6565 Control unit
Contents
1. MENU STRUCTURE START SCREEN o Start scan o Select language o Light ON SELECT LANGUAGE SELECT LANGUAGE o English o Fran ais LED TORCH n LIGHT ON isable click LIGHT OFF START SCAN 355 START SCAN tc CONNECT WITH THE DEVICE TO SETUP o Settings Import preset gt Send preset o Device info o Back EXAMPLE gt Start ch gt Stop ch gt ain gt Run auto level Back STORE ALL 4 TECHNICAL SPECIFICATIONS 6565 CONTROL UNIT OPERATING VOLTAGE 5 24 V RF CONNECTORS POWER CONNECTOR 2 1 mm power jack DIMENSIONS 176 x 83 x 43 mm 5 CONDITIONS OF WARRANTY PERIOD OF WARRANTY Unitron N V warrants the product as being free from defects in material and workmanship for a period of 24 months starting from the date of production indicated on it See note below If during this period of warranty the product proves defective under normal use due to defective materials or workmanship Unitron N V at its sole option will repair or replace the product Return the product to your local dealer for reparation THE WARRANTY IS APPLIED ONLY FOR DEFECTS IN MATERIAL AND WORKMANSHIP AND DOES NOT COVER DAMAGE RESULTING FROM e Misuse or use of the product out of its specifications e Installation or use in a manner inconsistent with the technical or safety standards in force in the country where the product Is used e Use of non suitable accessories power su2. johansson user Control Unit manual 6565 No part of this manual may be copied reproduced transmitted transcribed or translated into any language without permission Unitron reserves the right to change the specifications of the hardware and software described in these manuals at any time Unitron can not be held liable for any damages resulting from the use of this product Specifications are subject to change without notice 09 11 Unitron Frankrijklaan 27 B 8970 Poperinge Belgium T 32 57 33 33 63 F 32 57 33 45 24 email sales johansson be www johansson be www unitrongroup com CONTENTS 1 INTRODUCTION control UI oe A haa det derden akan eneen 4 package 016115 lt lt lt lt lt adas aa 5 safety 1500000118 nnana nnanan ennenen aene 6 2 MODULE OVERVIEW 8 3 WORKING WITH THE DEVICE using the rotary DUE ras aa ma ee nes 9 15256 E EE ne E no ie 10 Ri EEE EM 11 EE EE a NE 11 FN 11 ETT vr 12 Rd dll 12 gt connect with the device to Setup 12 Errante 13 4 TECHNICAL 610110104 14 9 CONDITIONS OF WARRANTY ie 15 1 INTRODUCTION Control Unit REF 6565 control unit for programming of compatible Johansson products via coax 6620 6621 6622 6623 6630 663 1 powered through coax cable or with power adapter delivered with contro
3. l unit store import of configuration easy operation rotary push button clear 2 7 OLED display 128x64 pixels LED torch PACKAGE CONTENTS Be sure all items listed below are included a control unit ref 6565 Hi coax cable black 1m m power adapter 5V 2A KJ user manual SAFETY INSTRUCTIONS A Read these instructions carefully before connecting the unit To prevent fire short circuit or shock hazard Do not expose the unit to rain or moisture Install the unit in a dry location without infiltration or condensation of water Do not expose it to dripping or splashing Do not place objects filled with liquids such as vases on the apparatus If any liquid should accidentally fall into the cabinet disconnect the power plug To avoid any risk of overheating Install the unit in a well aery location and keep a minimum distance of 15 cm around the apparatus for sufficient ventilation Do not place any items such as newspapers table cloths curtains on the unit that might cover the ventilation holes The unit must not be exposed to any source of heat sun heater Do not place any naked flame sources such as lighted candles on the apparatus Do not install the product in a dusty place Use the apparatus only in moderate climats not in tropical climates Respect the minimum and maximum temperature specifications To avoid any risk of electrical shocks Con
4. nect apparatus only to socket with protective earth connection The mains plug shall remain readily operable Pull out power plug to make the different connections of cables To avoid electrical shock do not open the housing of adapter Maintenance A Only use a dry soft cloth to clean the cabinet Do not use solvent For repairing and servicing refer to qualified personnel R Dispose according your local authority s recycling processes 2 MODULE OVERVIEW control port connect this port with the control port of the device to program the control port is indicated with a specific arrow A OLED display rotary button LED 0000 power connection Some devices have a control port which delivers power to the control unit In this case the power adapter is not needed However you can also connect the control unit to another output of the device in case of a profiler This enables you to program the device from a remote location inside the building e g from a wall outlet When doing this you need to connect the power adapter Read the manual of the device to see if you need a power adapter 3 WORKING WITH THE DEVICE USING THE ROTARY BUTTON The button of the control unit can be used to scroll through the menus to scroll up turn the button to the left to scroll down turn the button to the right select by pushing the button down THE SCREEN W
5. pply adapters e Installation in a defect system e External cause beyond the control of Unitron N V such as drop accidents lightning water fire improper ventilation THE WARRANTY IS NOT APPLIED IF e Production date or serial number on the product is illegible altered deleted or removed e The product has been opened or repaired by a non authorised person NOTE Date of production is MMYY format example 0411 April 2011 For the serial number barcodes the date corresponds to the 4 first numbers UNITRON www unitrongroup com UNITRON NV Frankrijklaan 27 B 8970 Poperinge Belgium T 32 57 33 33 63 F 32 57 33 45 24 salesQjohansson be www johansson be
Download Pdf Manuals
Related Search