For Model H939 - Premier Range
Contents
1. as OPERATION amp INSTALLATION INSTRUCTIONS For Model H939 For the User e Your safety e Description e Instructions for use For the Installer e Safety information e Installation e Troubleshooting u ISLAND COOKER HOOD u 6 Troubleshooting Symptoms Poor airflow Motor running but no airflow Motor cuts after a few minutes Strong cooking smell Oil dripping onto stove Whirring sound No electrical supply Aluminum grease filters clogged Charcoal grease filters clogged Butterfly valve jammed Contact technician High temperature safety device activated The hood is installed too near the cooking Stove Charcoal filters are not installed Oil cup missing or not installed Alumnium grease filter saturated Foreign object in contact with fan blade Check that the main switch is turned on Check that the plug is con nected Clean the filters and replace when dry Replace charcoal filters with new sets The kitchen is not sufficiently ventilated The hood must be at least 65cm from stove Charcoal filters must be in stalled in re circulating mode Remove aluminum filter and replace oil cup Wash the alumnium grease filters Contact technician Contents FROM Che Manufacturer nee 1 Your safety WARIO see DVS Cel At iaia DURAN NOUS Satine Saga Meee Nel lod iii Cleaning Maintenance amp SErvice Electiie END daria 2 Description MAN DS2. age in your area correspond to the appliance as indicated on the rating label Do not connect the hood to a duct that carries combustion fumes e g fireplace During use This product is designed for household use only and should never be used for com mercial applications After use always ensure that all controls are in the OFF position When frying with a gas flame take particular care not to allow the oil or grease in the pan to catch fire Cleaning Maintenance amp Service Clean the grease filters often at least once monthly Heavy oil deposits is a fire haz ard Hood surface should be cleaned with soft cloth and non corrosive detergent Important Never attempt to repair this appliance by yourself Always refer to qualified Service Technicians For your safety insist on original parts Always switch off the electricity and unplug the connection before conducting mainte nance or cleaning Electric Chord Ensure the supply chord is not exposed to heat chemicals or sharp objects If the supply chord is damaged it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard 2 Description Main parts 1 Aluminum Filter Baffle filter 2 Canopy 3 Main flue 4 Extension flue 5 Control buttons recirculation step 1 Ad just bracket according to your require ment ducted step 2 Mark the holes and mount hood body with sup pli
3. ed screws step 3 Drill holes to the ceil ing and fix the top mounting bracket Cleaning amp Maintenance REMOVAL OR MODIFICATIONS TO THE APPLIANCE ELETRIC WIRE OR PLUG VOIDS THE WARRANTY SURFACES Wash with warm soapy water and a soft sponge Never use abrasive detergent scouring pads steel wool or solvents on any part of this appliance as this will cause irreparable damage ALUMNIUM GREASE FILTERS Wash in the dishwashers or soak the panels in a degreasing agent for an hour then rinse off and dry before re installing CHARCOAL FILTERS only in re circulating model Charcoal cannot be reused They must be replaced with the appropriate types once a year or depending on the frequency of appliance usage For this appliance to function effectively regular maintenance is a must Clogged filters restrict airflow and may cause the motor to overheat 4 Installation Use suitable bolts to mount the appliance on a secure surface The distance between the bench top and the lowest part of the hood should be not less than 65cm The location of the installation must have permanent openings for ventilation Regulations concerning the discharge of air have to be fulfilled It is strongly recommended that the hood be installed right over the exhaust air from cooking It is better not to install the outlet of the pipe in the wind direction which can prevent the exhaust air from flowing backwards Fasten t
4. he components for the exhaust outlet with screws To ensure good ejection of exhaust air the pipe must not be bended for too many times 5 Ducted or Re circulating mode Depending on your requirement this appliance can be configured to operate in the ducted or re circulating modes DUCTED MODE Fire proof ducting system of 150mm diameter vent the fumes through a suitable outlet In the ducted mode only the aluminum grease filters are installed RECIRCULATING MODE Fumes are filtered for grease and odour through the alumi num grease filters and the charcoal filters respectively and re introduced into the kitchen environment In re circulating mode both the aluminum grease filters and the charcoal filters should be installed Speed Control The hood is equipped with a 3 or 4 speed mechanical electronic control Use the low speed for simmering medium speed for light cooking Use the high speed for frying or heavy cooking 3 Instructions for use Micro Switch Control Panel Turn on off the hood High speed setting Medium speed setting Low speed setting Turn on off the lamp
5. i a Ducted or Re circulating MOdEe Speed Ci 3 Instructions for use Micro Switch Control Panels ao pei Cleaning Maintenance essesssesssenennesssssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnessnnssnnnen E INStallat on as ei aaa DIMENSION CH al ee an it FOR THE INSTALLER Se Safety Information 6 TFOUDIESHOOEING iii From the Manufacturer Please read this user manual carefully before attempting to operate the appliance and store it in a safe place for future reference This appliance and its packaging are produced by processes that minimize waste and respect the environment Please help us to continue this effort to protect the environment by using the appli ance efficiently and dispose of the packaging in a responsible manner FOR THE USER 1 Your safety Warning PLEASE READ THIS SECTION THOROUGHLY BEFORE AT TEMPTING TO OPERATE THE APPLIANCE 1 There shall be adequate ventilation of the room when the range hoods is used at the same time as appliances burning gas or other fuels not applicable to appliances that only discharge the air back into the room 2 There is a fire risk if cleaning is not carried out in accordance with the instructions 3 Do not flamb under the rang hood 4 The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels not applicable to appliances that only discharge the air back into the room 5 This appliance i
6. s not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless the have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance 6 Air exhausted must be accordant with local laws FOR THE INSTALLER 5 Safety Information REMOVAL OR MODIFICATIONS TO THE APPLIANCE ELETRIC WIRE OR PLUG VOIDS THE WARRANTY step 4 Fit for step 5 Install upper funnel control panel install the duct by using p La 10pcs screws as supplied gt step 6 connect the power supply gt Dimension chart 750 1100 Installation This appliance must be installed or repaired by a qualified technician only It is dangerous to modify any part of this appliance The manufacturer declines all responsibility in case of failure to adopt proper safety measures Ensure the location in which this appliance is installed has good permanent ventila tion In ducted mode there must be one or more permanent air inlet The air collected must not be discharged into a duct used to blow off smoke from other appliances fed with electricity The distance between the bench to the lower part of the hood must not be less than 60cm Use an electrical connector with earth that is correct for your location Check that the volt
Download Pdf Manuals
Related Search