Home

DVD Duplicator System User`s Manual

1. LCD will show the copying information as follows Copying 24X Edit 1 10 gt 1 1 On the above figure 1 1 means the first track of all tracks we have selected and here we have just selected one track When copying comes to an end LCD will show the message as follows Burn Complete OK 03 The system will ask if you want to keep editing Please use AW to confirm Yes or No as shown below Continue edit next Disc Yes If you want to keep editing the current source CD will eject automatically and the system will ask you to insert another new CD as shown below Insert next disc After inserting the new CD press ENT to edit as before Suppose we decide to select the second track You select it by pressing ENT A will appear beside 2 10 as shown below Select Track 2 10 04 25 15 After selecting please use s to move to the End menu as shown below Select Track End 1Trk04 25 Press ENT to finish the CD editing and use A W to confirm Yes or No End edit disc and burn Yes LCD will show the copying information as follows Copying 24X Edit 2 10 gt 2 2 On the above figure 2 2 means the second track of all tracks we have selected and so far we have selected two tracks from two different CDs When copying comes to an end LCD will show the message as follows Burn Complete OK 03
2. The system will ask if you want to keep editing Suppose we don t like to continue then press W to confirm No Continue edit next Disc No On the above figure Press ENT The system will ask if you want to close all CDs sessions Please use A to confirm Yes or No as shown below Close all disc s session Yes 16 After deciding to close LCD will show the message as follows Closing Session Please wait 3 10 2 CD to HDD After closing sessions press ESC and W to enter the following figure Here the function CD to HDD is to let you select a track or more from CD ROM and then copy into a certain partition of HDD 10 02 Edit Track CD to HDD Edit On the above figure press ENT and you will enter the following figure Here 1 10 means the number one of the 10 tracks and 03 25 means the playing time Select Track 1 10 03 25 Suppose we decide to select the first track You select it by pressing ENT A will appear beside 1 10 as shown below But pressing ENT again may cancel the selection Select Track 1 10 03 25 After selecting please use A to move to the End menu as shown below Select Track End 1Trk03 25 Press ENT to finish the CD editing and use AW to confirm Yes or No End edit disc and burn Yes 17 Then the track as an image file will be loaded into HDD LCD will show the loading
3. Src 01 DVD ROM Total 4213 4MB Press ENT to see the details of source 2 If the comparison is identical LCD will show the message as follows Tgt 00 HDD P A Identical If comparison fails LCD will show the failure By pressing ENT twice LCD will show that the contents of source 1 and those of source 0 do not match as follows Tgt 00 HDD P A TOC not match 3 9 5 Select Partition This function is to select a partition in the hard disk First select the function by pressing W 9 05 Image P A Select Partition 12 After installing a hard disk your copy smart plus will format it automatically Each partition will occupy 5GB The number of partitions is dependent on the hard disk s capacity The partitions are alphabetically arranged Now select a working partition by pressing A W and LCD will show the message as follows Select Working Partition A After the partition is selected LCD will show the results as follows Set Partition to A 3 9 6 Select Src Drive This function is to select DVD ROM or any of the DVD writers as the source from which you can load data into a particular partition as an image file First select the function by pressing W 9 06 Image P A Image Src Drive Then use AY to select DVD ROM or any of the DVD writers as the source Select Img Src 01 IDE1 DVD ROM After selecting the source
4. Ver 2 03S is for 1 7 and Ver 2 03X for 1 14 DVD Duplicator 1 3 ver 2 03K 28 Press ENT to enter the next figure WINBOND W29C040 2002 5 27 ACARD 3 11 15 Quick Erase On the above figure press ESC and Y to enter the following figure Quick Erase is to erase the data on the DVD rewriteable disks quickly 11 15 Setup Quick Erase Press ENT to enter the next figure Use AW to confirm Yes or No All data will be lost erase Yes After confirming Yes and pressing ENT LCD will show the message as follows Erasing disc 00 00 Quick When erasing finishes LCD will show the results as follows Quick Erase OK 03 Fail 00 3 11 16 Full Erase On the above figure press ESC and Y to enter the following figure Full Erase is to erase the data on the DVD rewriteable disks completely Compared with Quick Erase Full Erase takes longer time to do the job 11 16 Setup Full Erase 29 Press ENT to enter the next figure Use AW to confirm Yes or No All data will be lost erase Yes After confirming Yes and pressing ENT LCD will show the message as follows Erasing disc 00 00 Full When erasing finishes LCD will show the results as follows Full Erase OK 03 Fail 00 3 12 Adv Setup Function 12 Adv Setup lets you change the system configuration This function includes 13 parts They a
5. 1 List of Functions 1 Copy 2 Test 3 Test amp Copy 4 Verify 5 Compare 6 Prescan 7 Disc Info 8 Select Source 9 Image It works only when a hard disk is connected 9 1 Load 9 2 Delete Image 9 3 Image Info 9 4 Compare Image 9 5 Select Partition Each partition is 5GB 9 6 Select Src Drive 10 Edit Track for CD only 10 1 CD to CD 10 2 CD to HDD It works only when a hard disk is connected 10 3 Play Audio Track 10 4 Close Session 11 Setup 11 1 Language English 11 2 Burn Speed Default is Maximum 11 3 Read Speed Default is Maximum 11 4 Auto Start Drive Default is Off 11 5 Startup Menu Default is Copy 11 6 Auto Verify Default is Off 11 7 Auto Compare Default is Off 11 8 Auto Prescan Default is Off 11 9 Eject Disc Default is Eject Good Only 11 10 Burn On The Fly Default is On 11 11 Burn Mode Default is DAO 11 12 Button Sound Default is On 11 13 Device Info 11 14 System Info 11 15 Quick Erase 11 16 Quick Erase 12 Adv Setup 12 1 UnderRun Protect Default is On 12 2 Overburn Default is Off 12 3 Read Error Skip Default is Off 12 4 Format HDD 12 5 Verify HDD 12 6 Burn in 12 7 Update Firmware 12 8 Compare Firmware 12 9 H W Diagnostic 12 10 Load Default 12 11 CD G Default is Off 12 12 ISRC Default is Off 12 13 Switch Link Host 39 Appendix 2 LCD Messages 1 Normal Conditions Initialize SDRAM l i Initialize the memory of the system Detect Drives 2 1
6. Detect what drives are connected with the system User Aborti eonan eia enina RTE a endear Cancel the job during operation AMaAlyZiNG oaeee A R a AB Analyze the source disc Source Drive Not Ready mere Source drive is not ready to read Target Drive Not Ready mere Target drive is not ready to write Source Disc Not Ready mmm Source disc is not ready to be read Target Disc Not Ready Target disc is not ready to be written into Erasing ISG ss aaa dna al at e dia a The system is erasing the data on the disc Fail to get Drive Info eee The drive information cannot be obtained Fail to get Src Disc Info The information of source disc cannot be obtained Save new config Fail The new setting of configuration cannot be saved Load Default Config cee Do you want to load the default settings Src amp Tgt can t in the same channel During comparison the source and target discs cannot be in the same channel Preparing cnc vender ee Pete tt i The system is preparing to record Check Target Please Wait The system is checking the target device Audio Disc Can t compare The system cannot compare the audio discs Identical n ai aed ages it popa data The comparison results are the same Read disc error mere During comparison the disc
7. comparison comes to an end LCD will show the results as follows Compare OK 3 Fail 0 Diff 0 Press ENT to see the details of source 1 as shown below Src 01 DVD ROM Total 4213 4MB Press ENT to see the details of source 2 If the comparison is identical LCD will show the message as follows Src 02 DVD RW Identical If comparison fails LCD will show the failure By pressing ENT twice LCD will show that the contents of source 1 and those of source 2 do not match as follows Src 02 DVD RW TOC not match 3 6 Prescan Function 6 Prescan is to scan if the source DVD can be read correctly and by the way to test the reading speed Select function 6 Put the source DVD onto DVD ROM 6 Prescan Press ENT to prescan LCD will show the scanning information as follows Scanning DVD 0 4213 4MB 40 40 When scanning finishes and the source DVD can be read correctly LCD will show the results as follows PreScan OK 3 7 Disc Info Function 7 Disc Info is to show the basic information of source DVD Select function 7 Put the source DVD onto DVD ROM 7 Disc Info Press ENT and LCD will show the DVD information as follows Disc Type DVD ROM Capacity 4213 4MB 3 8 Select Source Function 8 Select Source is to let you select the data on DVD ROM DVD writers or HDD as the source from which copying will be do
8. function 10 03 Edit Track Play Audio Track Use AY to select the track you want to play Select Track 1 10 03 25 After selecting and pressing ENT LCD will show the playing information below Playing Track 1 00 00 03 25 3 10 4 Close Session This function is to close CDs and let no data written into After closing you can put the CDs on any normal player and listen On the above figure press ESC and to select the function 10 04 Edit Track Close Session 21 After pressing ENT the system will ask if you are sure to close Close all disc s session Yes After pressing ENT LCD will show the message as follows Closing Session Please wait When closing finishes LCD will show the results as follows Closing Complete OK 3 Fail 0 3 11 Setup Function 11 Setup lets you change the default settings Once you change a setting remember to press ENT to save it However it is suggested to use the defaults for the optimal operation This function includes 16 parts They are Language Burn Speed Read Speed Auto Start Drive Startup Menu Auto Verify Auto Compare Auto Prescan Eject Disc Burn On The Fly Burn Mode Button Sound Device Info System Info Quick Erase and Full Erase Select function 11 11 Setup 3 11 1 Language On the above figure press ENT and you will enter the following figure Th
9. such as DVD ROM you can press ENT and LCD will show the message as follows Load image from Drive ID 01 13 3 10 Edit Track for CD only Function 10 Edit Track is exclusively designed for editing a collection of favorite songs from CDs In other words it can collect different tracks songs on a number of CDs and merge them into a single CD This function includes 4 parts They are CD to CD CD to HDD Play Audio Track and Close Session Select function 10 10 Edit Track 3 10 1 CD to CD On the above figure press ENT and you will enter the following figure Here the function CD to CD is to let you select a track or more from CD ROM and then copy into blank CD R RWs 10 01 Edit Track CD to CD Edit On the above figure press ENT and you will enter the following figure Here 1 10 means the number one of the 10 tracks and 03 25 means the playing time Select Track 1 10 03 25 You can press W to see the second track and so on Suppose we decide to select the first track You select it by pressing ENT A will appear beside 1 10 as shown below But pressing ENT again may cancel the selection Select Track 1 10 03 25 After selecting please use A to move to the End menu as shown below Select Track End 1Trk03 25 14 Press ENT to finish the CD editing and use A Y to confirm Yes or No End edit disc and burn Yes
10. EZDVD2 DVD Duplicator System User s Manual CalOptic Copyright 2003 Copyright and Trademarks Information The information in this manual is subject to change without prior notice and does not represent a commitment on the part of CalOptic who assumes no liability or responsibility for any errors that may appear in this manual EZCD2 EZDVD2 are trademarks of CalOptic IBM is a trademark of the International Business Machine Corporation Apple and the PowerMac Logo are registered trademarks of Apple Corporation All brand names and trademarks are properties of their respective owners This manual contains materials protected under International Copyright Laws All rights reserved No part of this manual may be reproduced transmitted or transcribed without the expressed written permission of the manufacturer and authors of this manual CalOptic is used only for backing personal data and editing personal audio tracks Violation of Copyright is a criminal charge CalOptic does not support any illegal recording and is not responsible for the illegal actions of the users Chapter 1 Introduction The EZDVD2 Pro DVD Duplicator is a standalone This model is designed for copying DVD in video audio or data form With the EZDVD2 Pro Duplicator copying will become easy and efficient Professional mechanism design multifunctional LCD and 4 simple buttons on the panel all make the four models easy to operate For any end user they ar
11. above figure press ESC and to enter the following figure Eject Disc provides three choices They are Eject Good Only Eject All Disc and Do Not Eject Eject Good Only means that the DVDs will eject automatically only when they are copied successfully Eject All Disc means that the DVDs will eject automatically whether they are copied successfully or not Do Not Eject means that you need to eject the DVDs manually when copying finishes 11 09 Setup Eject Disc Press ENT to enter the following figure The default is Eject Good Only Press W to select Eject All Disc or Do Not Eject Eject Disc Eject Good Only 3 11 10 Burn On The Fly On the above figure press ESC and Y to enter the following figure Burn On The Fly lets you control the copying methods When the setting is On the data will be copied directly from the source DVD to the target DVDs When the setting is Off the data will be loaded into a partition of HDD first and hence copying will be done 11 10 Setup Burn On The Fly Press ENT to enter the following figure The default is On Press W to select Off Burn On The Fly On If your copy smart plus doesn t connect with a hard disk LCD will show the message as follows No Valid HDD 26 3 11 11 Burn Mode On the above figure press ESC to return to Function 11 and then select part 11 Burn Mode as the following figure shows Burn Mode lets you control th
12. ail The image isn t successfully loaded from DVD to the hard disk HDD too small to handle image The hard disk hasn t enough capacity to store the data image at least 5Gbytes No Valid HDD mmm eee The system cannot find a hard disk HDD too small mere The capacity of hard disk is too small No Image in Partition XX 0a There is no data image in partition xx Image Exists Overwrite There is a data image in the current partition Confirm the overwriting of data Delete Image in Partition xx Confirm the deleting of data image in partition xx Partition Damage mm The partition is damaged Verify Disk or Partition Do you want to verify the hard disk or just a partition 40 Verify Hard Disk OK e The hard disk is verified successfully Verify Hard Disk Fail The hard disk is not verified successfully Verify Partition Header 0 00 0 eeeeeeeeeeneeeeeeeneee Verify the partition header Select HD First mmm Select a formatted hard disk at first 3 Audio Editing Lost selected Tracks ueeee Abort the selected tracks and delete them End edit disc and burn Finish the music disc editing and start to copy Continue edit next Disc Ask if you want to continue the music disc editing Target Overflow Re Select The disc capacity is not enough to store the selected track
13. ation A hard disk drive is not necessary but with a hard disk drive you will be able to use the function Image In other words you have one more option to reproduce a DVD from an image file stored in the hard disk drive In the next 2 sections subsection 3 2 1 and 3 2 2 we are going to describe the differences of having a 3 5 hard disk and not having one 2 2 1 With a Hard Disk Drive If you have a hard disk drive in your EZDVD2 DVD Duplicator the operation procedures will be as follows e Once your EZDVD2 DVD Duplicator detects the hard disk drive the system will ask if you want to format it or not A 10GB hard disk drive can be divided into 2 partitions each partition has a 5GB capacity e _ Use function 8 Select Source to set the hard disk drive as the source e _ In function 9 Image to select a partition to store the data e _ If there is no data in a selected partition place a source DVD into DVDROM and use function 9 01 Load to transfer the data from the DVD into the selected partition by pressing ENT Different DVD images can be stored in different partitions e There are 12 main functions to select from Function 1 is Copy You can press W to select other functions e Switch back to function 1 Copy by pressing A e Place blank DVD discs into the DVD writers and press ENT to start copying e When copying is completed the successfully recorded DVDs will eject automatically The default setting is set to eject au
14. cannot be read Cannot read TOC mere The system cannot read the contents of disc TOC not match a ioa eeen The comparison results are not the same Source Disc Empty oo ee The source disc doesn t contain any data Target overflow The target disc hasn t enough capacity to store new data Target Disc Not Empty eee The target disc still has data Press a Key to Eject Good Disc Press any key to eject the good disc after copying Press a Key to Eject Fail Disc Press any key to eject the failed disc after copying DVD RW does not Support the Func DVD RW doesn t support this function Hold ESC to exit 0 eee Press ESC for a second to terminate the test All data will be lost erase All data on the disc will be lost Confirm the erasing of data Erase Finished mere The erasing of data comes to an end No Eraseable Disc in DVD RW The disc on the DVD RW device is not rewritable 2 Connecting with a HDD HDD not Format 0 00 00 eeeeeeeeeeenaes The hard disk hasn t been formatted yet Format HDD eee Ask if you want to format the hard disk All data will be lost format All data on the hard disk will be lost Confirm the formatting of hard disk Format HDD OK The Formatting of hard disk has been completed Image load OK The image is successfully loaded from DVD to the hard disk Image load F
15. e burning modes There are two modes DAO Disc At Once and TAO Track At Once They only support CD If the DVD writer doesn t support the mode you have selected the copy smart plus will automatically switch to the other mode 11 11 Setup Burn Mode Press ENT to enter the next figure The default is DAO Press W to select TAO Burn Mode DAO 3 11 12 Button Sound On the above figure press ESC and to enter the following figure Button Sound lets you control the sound of a button when you press it 11 12 Setup Button Sound Press ENT to enter the next figure The default is On Press W to select Off Button Sound On 3 11 13 Device Info On the above figure press ESC and Y to enter the following figure Device Info shows the information of the DVD ROM and any of the DVD writers you have installed 11 13 Setup Device Info 27 Press ENT to enter the next figure 01 IDE1 Master DVD ROM PIONEER Press ENT to enter the next figure DVD ROM DVD 116 1 22 Press W twice to enter the next figure 02 IDE2 Master DVD RW PIONEER Press ENT to enter the next figure DVD RW DVR 103 1 80 3 11 14 System Info On the above figure press ESC and W to enter the following figure System Info shows the information of the system 11 14 Setup System Info Press ENT to enter the next figure
16. e function Language lets you select a language in which messages can be shown on LCD 11 01 Setup Language 22 Press ENT to enter the following figure Here LCD only supports English Language English 3 11 2 Burn Speed On the above figure press ESC and to enter the following figure The function Burn Speed lets you control the burning speed of DVD writers 11 02 Setup Burn Speed Press ENT to enter the following figure The default is set to MAXIMUM but you are able to change it to your preference such as 8X 4X 2X and 1X Burn Speed Maximum 3 11 3 Read Speed On the above figure press ESC and Y to enter the following figure The function Read Speed lets you control the reading speed of target DVDs 11 03 Setup Read Speed Press ENT to enter the following figure The default is MAXIMUM but you are able to change it to your preference such as 32X 16X and 8X Read Speed Maximum 23 3 11 4 Auto Start Drive On the above figure press ESC and to enter the following figure Auto Start Drive is to copy or test automatically once you put blank DVDs onto the writers 11 04 Setup Auto Start Drive Press ENT to enter the following figure The default setting is Off Press W to select 1 one blank DVD Auto Start Drive Off 3 11 5 Startup Menu On the above figure press ESC and Y to enter the following fi
17. e really cost effective products 1 1 Features Standalone DVD Duplicator Power on self test Support Hard Disk Drive Optional Automatic format detection User friendly interface with LCD messages Fast copying on high speed DVD writers Easy operation without installing software and extra training Firmware update through DVD ROM Chapter 2 Basic Instructions 2 1 Buttons and LCD There are four buttons and an LCD on the panel of the copy smart plus They are described as follows 2 d UNT 3 s v ESG 1 LCD Display shows all functions and messages 2 Up Arrow used to scroll up through functions or menus 3 Down Arrow used to scroll down through functions or menus 4 ENTER Button used to execute a selected function 5 ESCAPE Button used to cancel a selected function After you power on and the copy smart plus detects installed hardware like DVDROM DVD writers it will execute a self test for seconds When the self test is completed the LCD will show the following messages below 1 2 Initialize SDRAM DVD Duplicator 1 3 ver 2 03K Figure 1 represents the EZDVD2 3 and EZDVD2 7 The firmware version for EZDVD2 3 is 2 03S and that for the EZDVD2 7 is 2 032 The figures below will be displayed after the system self test Detect Drives 1 Copy There are 12 main functions Function 1 is Copy You can press W to select the other functions 2 2 About Hard Disk Drive Install
18. efore copying be sure that the source DVD is placed onto DVD ROM or there is an image in the hard disk drive partition if you have installed a hard disk If you are not so sure of real copying you can use Function 2 Test to simulate first Select function 1 Copy put a source DVD into the DVD ROM and blank DVD discs onto the DVD writers DVD rewriteable discs containing old data are also usable 1 Copy After the DVD ROM and DVD writers detect DVDs press ENT to start copying LCD will show the copying information as follows Copying DVD 0 4213 4MB d 20 15 When copying is in progress MB and time will decrease whereas the percentage of completion increases When copying comes to an end LCD will show the results as follows The passed DVDs will eject automatically 1 Copy OK 03 3 2 Test Function 2 Test is to simulate the copying progress When simulation finishes there will be no data really written into DVD discs Select function 2 Put a source DVD onto DVD ROM and blank DVD discs onto the DVD writers 2 Test Press ENT to start simulation If you use DVD rewriteable discs that contain data the old data will be quickly erased before simulation as shown below Erasing disc LCD will show the testing information as follows Testing DVD 0 4213 4MB d 20 15 When the test comes to an end LCD will show the results as follows 2 Tes
19. firm Burn as shown below Burn or Move to partition Burn After pressing A LCD will show the copying information as follows Copy PO 24X 0 1 2 Trk03 25 When burning finishes LCD will show the results as follows Burn Complete OK 03 19 On the above figure press ESC to enter the following figure Now press W to move the data from HDD template into a certain partition Burn or Move to partition Move After pressing W you need to select a partition into which the data will be moved Suppose we select A as shown below Select Partition A After pressing ENT LCD will show the moving information as follows Moving to P A 0 When moving is completed the LCD will show the results as follows Moving to P A OK If the chosen partition has contained image data the system will ask to overwrite or keep the data Here please use A to overwrite Image Exists Overwrite Yes After pressing A LCD will show the moving information as follows Moving to P A 0 20 When moving is completed the LCD will show the results as follows Moving to P A OK 3 10 3 Play Audio Track This function is to make the copy smart plus act as a music player You can plug an AV terminal in the audio port on the back of the device and enjoy the music On the above figure press ESC and Y to select the
20. gure Startup Menu lets you select any one of the functions except Adv Setup as the first item appearing on the menu whenever you turn on the copy smart plus 11 05 Setup Startup Menu Press ENT to enter the following figure The default is Copy Of course you can select any other function as the first item but remember to press ENT Startup Menu 1 Copy 3 11 6 Auto Verify On the above figure press ESC and Y to enter the following figure Auto Verify is to verify automatically if the target DVDs can be read after copying 11 06 Setup Auto Verify 24 Press ENT to enter the following figure The default is Off Press W to select On Auto Verify Off 3 11 7 Auto Compare On the above figure press ESC and Y to enter the following figure Auto Compare is to compare automatically the source DVD and the target DVDs after copying 11 07 Setup Auto Compare Press ENT to enter the following figure The default is Off Press W to select On Auto Compare Off 3 11 8 Auto Prescan On the above figure press ESC and Y to enter the following figure Auto Prescan is to scan automatically if the source DVD can be read correctly and by the way to test the reading speed 11 08 Setup Auto Prescan Press ENT to enter the following figure The default is Off Press W to select On Auto Prescan Off 25 3 11 9 Eject Disc On the
21. he above figure press ESC and Y to enter the following figure ISRC is a kind of special copying format This function supports the special format 12 12 Adv Setup ISRC Press ENT to enter the next figure The default is Off Press W to select On ISRC Off 3 12 13 Switch Link Host On the above figure press ESC and to enter the next figure Switch Link Host lets you switch to the link host mode if your 2030DS has connected with a PC 12 13 Adv Setup Switch Link Host Press ENT to enter the next figure Link Host Mode Initializing 36 Chapter 4 Troubleshooting 4 1 About LCD After powering on if there is no LCD please check if the connection of power cord is firm and the environment of power outlet is normal 4 2 About Error Messages During Copy Test Compare and Verify etc if you press ESC to abort an error message will appear on LCD Abortion may cause the copy smart plus to hang up therefore you have to power on again If reading fails an error message will appear on LCD Please get a new source DVD to try again If the copy smart plus hasn t detected any device after powering on an error message will appear on LCD 4 3 About DVD ROM DVD Writers If a DVD ROM or DVD writers cannot read please confirm the format of the source DVD and check if it is damaged Use any DVD writer to read the source DVD If it works the DVD ROM is probably defective or no
22. information as follows Load PO 24X Edit 1 10 gt 1 1 When loading comes to an end LCD will show the message as follows Image load OK The system will ask if you want to keep editing Please use AW to confirm Yes or No as shown below Continue edit next Disc Yes If you want to keep editing the current source CD will eject automatically and the system will ask you to insert another new CD as shown below Insert next disc After inserting the new CD press ENT to edit as before Suppose we select the second track You select it by pressing ENT A will appear beside 2 10 as shown below Select Track 2 10 04 25 After selecting please use A to move to the End menu as shown below Select Track 2 10 04 25 Press ENT to finish the CD editing and use AW to confirm Yes or No End edit disc and burn Yes 18 Then the track as an image file will be loaded into HDD LCD will show the loading information as follows Load PO 24X Edit 2 10 gt 2 2 When loading comes to an end LCD will show the message as follows Image load OK The system will ask if you want to keep editing This time please use W to confirm No as shown below Continue edit next Disc No Then the system will ask if you want to burn from HDD into CD R RW or move into a partition Please use A to con
23. ne Select function 8 8 Select Source Press ENT and then press A to select the source as shown below Src DVD ROM 01 IDE1 Master After selecting the source such as DVD ROM you can press ENT and LCD will show the message as follows DVD ROM selected Suppose you select HDD as the source and try to copy from one of its partitions but the partition contains no data an error message will appear on LCD At this moment you can switch to another partition that contains data or use function 9 Image to load the data into the chosen partition first 3 9 Image Function 9 Image is valid only when you have installed a hard disk This function includes 6 parts They are Load Delete Image Image Info Compare Image Select Partition and Select Src Drive The loaded data is called an image file Select function 9 9 Image 3 9 1 Load On the above figure press ENT and you will enter the following figure Here the function Load is to let you load data from DVD ROM or any one of the DVD writers into the current partition of the hard disk P A means partition A 9 01 Image P A Load Press ENT to load LCD will show the loading information as follows Load A DVD 0 4213 4MB d 20 15 After the image file is successfully loaded LCD will show the results as follows Image load OK If there is an image file existing in the current parti
24. ot be written into Flash ROM Technical Support Form Email support caloptic com http mww caloptic com 41
25. re UnderRun Protect Overburn Read Error Skip Format HDD Verify HDD Burn in Update Firmware Compare Firmware H W Diagnostic Load Default CD G ISRC and Switch Link Host On the above figure press ESC to return to Function 11 Then press ESC for 2 seconds to enter Function 12 as the following figure shows 12 Adv Setup 3 12 1 UnderRun Protect On the above figure press ENT and you will enter the following figure UnderRun Protect lets you control On and Off of Buffer Under Run Protection such as Burn Proof SafeBurn JustLink Seamless Link etc 12 01 Adv Setup UnderRun Protect 30 Press ENT to enter the following figure The default is On Press W to select Off UnderRun Protect On 3 12 2 Overburn On the above figure press ESC and to enter the following figure Overburn lets you decide whether to copy beyond the limit of the CD or not 12 02 Adv Setup Overburn Press ENT to enter the following figure The default is Off Press W to select On Overburn Off 3 12 3 Read Error Skip On the above figure press ESC and Y to enter the following figure Read Error Skip is to neglect any error that occurs during copying Under normal circumstances when an error occurs during copying a message will appear on LCD Yet you can use Read Error Skip to copy some defective DVDs 12 03 Adv Setup Read Error Skip Press ENT to enter the follo
26. s Please select again Close all disc s session 0 eee Confirm the closing of disc sessions Can t edit HDD The hard disk cannot be edited as a source audio disc NO AUDIO track in this disc The source disc has no audio track Insert next dist orini anaa ran AA e Rata n tea ea a Insert the next audio disc Sessions were closed already The disc sessions have already been closed Burn or Move to partition Do you want to directly copy the data into disc or move them to the partition Tgt overflow del last trk The disc capacity is not enough to store the selected tracks So do you want to delete the last track Ins empty disc Continue Do you want to insert a blank disc and continue copying 4 Firmware Update Invalid firmware Disc ce The disc doesn t contain a valid firmware Updating FW The system is updating the firmware Update F W xxx to yyy Do you want to update the firmware version from xxx to yyy Searching FW iee The system is searching for a valid firmware Check Sum Error ashina naa aapna The udpated firmware has errors Source can t be Hard Disk During comparison the source cannot be hard disk Last update F W OK 00 00 ee The firmware is updated successfully Last update F W Fail The firmware is not updated successfully Flash ROM fail mmm Data cann
27. t OK 03 Stopping the test halfway does not affect the DVD discs but if the DVD rewriteable disks contain important data they may be destroyed 3 3 Test amp Copy Function 3 Test amp Copy is to test first and then copy actually Select function 3 Put a source DVD onto DVD ROM and blank DVD discs onto the DVD writers 3 Test amp Copy Press ENT to start simulation LCD will show the testing information as follows Testing DVD 0 4213 4MB d 20 15 When the test finishes actual copying will begin as shown below Copying DVD 0 4213 4MB d 20 15 When the whole process finishes LCD will show the results as follows 3 Test amp Copy OK 03 3 4 Verify Function 4 Verify is to examine if the target DVDs can be read correctly after copying Select function 4 4 Verify Press ENT to verify LCD will show the verification information as follows Verify DVD 0 4213 4MB 2 29 14 When verification comes to an end LCD will show the results as follows 4 Verify OK 03 3 5 Compare Function 5 Compare is to make a comparison between the source DVD and the target DVDs after copying Select function 5 Put the source DVD onto DVD ROM and the target DVDs onto DVD writers 5 Compare Press ENT to compare LCD will show the comparison information as follows Compare DVD 0 4213 4MB 1 05 06 When
28. t compatible with the source DVD Use a fine DVD writer as the data reader and set the Read Speed at minimum 4 4 About Buttons If you press any one of the four buttons on the panel but there is no response it is perhaps that the button cannot function well Please inspect the jumper setting 4 5 About DVD Writer Not Readable After copying if the DVD writer is not readable please use Compare to examine or get another DVD ROM to test 4 6 About High Failure Rate If the failure rate of copying is high please do the following things to improve e Lower the speed of DVD writer e _ Inspect if the blank disk s quality is bad e Update the firmware e Inspect the DVD writer s maximum writing speed If the speed is over 24X copy the data to a hard disk first and then transmit to DVD 4 7 About Firmware Update If you cannot update the firmware please inspect the BIOS program Perhaps you have downloaded a wrong program or let a zipped file be written into DVD The zipped file should be unzipped first Failure in firmware update may cause the copy smart plus to fail in booting Under the circumstances please return the control board to ACARD for repair 37 4 8 About Function 12 and Cancellation If you want to execute function 12 Advanced Setup you can press ESC for 2 seconds And during operation if you want to cancel a function like Copy Test Verify and so on you can press ESC for 2 seconds too 38 Appendix
29. t is simply a simulation Burn in Test Press ENT and use AY to select the time of simulation such as 1 2 3 1000 or Run Continuous The figure below shows Run Continuous Sel burn in num Run Continuous Press ESC ENT to select Erase amp Copy as the following figure shows Erase amp Copy is to erase and write repeatedly It is only for DVD rewriteable disks Burn in Erase amp Copy Press ENT and use AY to select the time of simulation such as 1 2 3 1000 or Run Continuous The figure below shows Run Continuous Sel burn in num Run Continuous 33 3 12 7 Update Firmware On the above figure press ESC and to enter the following figure Update Firmware is to update firmware to the latest version But you should get the version first 12 07 Adv Setup Update Firmware You can get the newest firmware version from ACARD by e mail or download it directly from the web site http www acard com Then unzip the file cdxxx bin and copy it into a blank DVD After placing the DVD on the DVD ROM press ENT The system will begin searching the new firmware and show the message on LCD as follows after it finds the new firmware Then press ENT to update Searching F W XXX XXXXX 3 12 8 Compare Firmware On the above figure press ESC and Y to enter the following figure Compare Firmware is to compare the current firmware version and the ne
30. tion the system will ask you whether to overwrite it or not Please use A Y to confirm Yes or No Image Exists Overwrite Yes 10 3 9 2 Delete Image If you want to empty an image file stored in a particular partition you can use the function Delete Image to do so First select the function by pressing W 9 02 Image P A Delete Image The system will ask if you are sure to delete Use A Y to confirm Yes or No Delete Image in Partition A Yes After the image file is deleted LCD will show the results as follows Partition A Image is deleted 3 9 3 Image Info This function is to show the basic information of an image file stored in a particular partition First select the function by pressing W 9 03 Image P A Image Info Press ENT and LCD will show the information of the image file as follows Disc Type DVD ROM Capacity 4213 4MB 3 9 4 Compare Image This function is to compare the contents of the source DVD and those of the image file in the partition First select the function by pressing W 9 04 Image P A Compare Image 11 Press ENT and LCD will show the comparison information as follows Compare DVD 0 4213 4MB 1 05 06 When comparison comes to an end LCD will show the results as follows Compare OK 1 Fail 0 Diff 0 Press ENT to see the details of source 1 as shown below
31. tomatically but can changed e The failed DVDs will remain in the writers The default setting is set to keep failed DVDs in the writers but also can changed To remove the failed DVDs press the eject button on the writers e During copy operation do not press any of the buttons on the EZDVD2 Duplicator or it may cause damage to the controller and the DVDs will be damaged 2 2 2 Without a Hard Disk Drive If you don t have a hard disk drive in EZDVD2 DVD Duplicator the operation procedures will be as follows e _ Place a source DVD into DVD ROM e Switch to function 1 Copy by pressing A Place blank DVD discs into the DVD writers and press ENT to start copying e When copying is completed the passed DVDs will eject automatically The default setting is set to eject automatically but can changed e The failed DVDs will remain in the writers The default setting is set to keep failed DVDs in the writers but also can changed To remove the failed DVDs press the eject button on the writers Chapter 3 Functions There are 12 functions Copy Test Test amp Copy Verify Compare Prescan Disc Info Select Source Image Edit Track Setup and Advanced Setup Among the 12 functions Edit Track is designed exclusively for editing a collection of favorite songs from CDs If you do not understand an LCD message you can see Appendix 2 3 1 Copy Function 1 Copy is to copy data from a source DVD directly into blank DVD discs B
32. wing figure The default is Off Press W to select On Read Error Skip Off 31 3 12 4 Format HDD On the above figure press ESC and Y to enter the following figure Format HDD is to partition the hard disk But before formatting all data on the hard disk will be deleted 12 04 Adv Setup Format HDD Press ENT to enter the next figure Use AW to confirm Yes or No All data will be lost format Yes If your copy smart plus doesn t connect with a hard disk LCD will show the message as follows There is no HDD 3 12 5 Verify HDD On the above figure press ESC to return to Function 12 and then select part 5 Verify HDD as the following figure shows Verify HDD is to verify if the hard disk or any of its partitions can work well 12 05 Adv Setup Verify HDD Press ENT to enter the next figure Use AW to confirm Disk or Parti Verify Disk or Partition Disk Press ENT to verify After verification LCD will show the results as follows Verify Hard Disk OK 32 3 12 6 Burn in On the above figure press ESC and Y to enter the following figure Burn in is to simulate the copying progress many times The time can be from 1 to 1000 After each cycle of simulation the DVDs on the DVD writers will eject automatically and recede for the next bout of simulation 12 06 Adv Setup Burn in Press ENT to enter the next figure Tes
33. wly downloaded version It can prove if the downloaded version is the newest one 12 08 Adv Setup Compare Firmware 3 12 9 H W Diagnostic Press ESC and Y to enter the next figure H W Diagnostic is to test the system 12 09 Adv Setup H W Diagnostic Press ENT to enter the next figure Follow the instructions on LCD to do the button test After that the system will do the self test of SDRAM the hardware connection test and flash test All test results will be shown on LCD It is the easiest way to know if the system can work well ti Enter ESC Hold ESC to exit 34 When the whole process finishes LCD will show the message as follows Test finished 3 12 10 Load Default On the above figure press ESC and Y to enter the next figure Load Default is to make all changed settings recover to defaults 12 10 Adv Setup Load Default Press ENT to enter the next figure Use AW to confirm Yes or No Load Default Config Yes When default loading finishes LCD will show the results as follows Load Default OK 3 12 11 CD G On the above figure press ESC and to enter the following figure CD G is a kind of special copying format This function supports the special format 12 11 Adv Setup CD G Press ENT to enter the next figure The default is Off Press W to select On CD G Off 35 3 12 12 ISRC On t

DVD Duplicator System User`s Manual

Contents

Download Pdf Manuals

Related Search

Related Contents