Home

SynGenX™-2000 System USER MANUAL

1. 7 The default password for Administrator is Admin 1 8 The default password for Lab Supervisor is Supervisor 1 9 The default password Lab Technician is Technician 1 10 To edit a user profile click the appropriate name under the USER ID column 11 The corresponding information will appear in the entry fields and can be edited except for the User ID 12 Unchecking the ACTIVE checkbox will inactivate the user Inactive users will be unable to log in to the DataTrak software 13 To save changes click the SUBMIT EDIT button To cancel all changes made click the CANCEL button Resetting a Password 1 Only default passwords are stored To reset a password click the appropriate name under the USER ID column 2 Click the RESET PASSWORD checkbox 3 Click the SUBMIT EDIT button to reset the password to the default setting or click the CANCEL button to cancel the edit Registering and Editing a SynGenX 2000 Control Module 1 Place an unregistered SynGenX Control Module in a SynGenX Docking Station that is connected to the computer 2 Click CONTROL MODULE on the left navigation pane a Kj SynGen DataTrak Administration 2 Admin Administrator User Profile SynGenX System Centrifuge Control Module Disposable Cartridge CryoPRO Workstation CryoPRO 2 Bag Set 102 100116 12 23 2014 3 Click the REGISTER CONTROL MODULE button Page 36 14 02 015 Revision D E
2. Y Log out after inactivity Old password New password Timeout 1024 minutes Confirm new password PO Starting top level item Starting device History Control Module e Oipiacess CryoPRO Workstation Download preferences Expiration and maintenance warning l Show report after download 1 24 Month s v in advance Automatic Logout Includes a LOG OUT AFTER INACTIVITY checkbox and an up down selection menu to configure a timeout from 10 to 500 minutes in 10 minute increments Starting Top Level Item Includes selection buttons to select the opening display screen HISTORY or PROCESS Download Preferences Includes checkbox to show report after download Select the checkbox to activate the option Password Includes the following entry fields for changing a login password OLD PASSWORD NEW PASSWORD and CONFIRM NEW PASSWORD Starting Device Includes selection buttons for the device to be opened upon login Control Module or CryoPRO Workstation Expiration and Maintenance Warning Includes up and down keys and dropdown menu selection to designate the amount of advance notification of expiration and calibration due dates in days weeks or months Page 31 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual A TM SynGen Balance Rings The Balance Rings are specifically designed for use with the SynGenX 2000 System for balancing the cont
3. Verify the printer and click the PRINT button 1 Click the PREFERENCES section on the lower left navigation pane 2 The PREFERENCES window will appear T Preferences Automatic logout Y Log out after inactivity Timeout 104 minutes Starting top level item History C Process Download preferences l Show report after download Password New password Confirm new password Old password Starting device Control Module CryoPRO Workstation Expiration and maintenance warning 14 Month s v in advance 3 Click the LOG OUT AFTER INACTIVITY checkbox and select the appropriate time in minutes from the dropdown menu 4 Select the STARTING TOP LEVEL ITEM from the options displayed The selection will automatically appear upon after logging into the software 5 Click the SHOW REPORT AFTER DOWNLOAD checkbox to either enable or disable 6 To edit a password enter the current password the new password and confirm new password by reentry The password must be between 8 and 20 characters and must include one number and one punctuation character Page 44 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen 7 Select the STARTING DEVICE from the options displayed The selection will automatically appear upon after logging into the software 8 Set the EXPIRATION AND MAINTENANCE WARNING using the dropdown menu for days weeks
4. 2000 System User Manual QSynGen The Control Module PROCESSING REPORT contains the following information Processing Report for Blood Unit ID 123456789 Control Module 102 100116 CryoPRO Workstation 104 100011 gt SynGenX Processing Report Unit ID 123456789 ES EXPORT a Stratification Depletion we Restratification m Harvest Process Complete Process Complete 900 1200 1500 1800 2100 Time Seconds labtech1 Depletion Valve Open Duration sec Data Transfer Time 12 23 2014 9 54 57 AM Harvest Valve Open Duration sec Control Module 102 100116 Harvest Target Volume mL Centrifuge 41559969 Temperature C Min 20 0 Avg DC Lot 72979 0000 Graph Reviewed By Jane Supervisor DC Expiration 2015 06 UNIT ID The Blood Unit ID for the process report EXPORT button Allows the data to be exported as a CSV file SAVE AS PDF button Allows the report to be saved as a PDF file PRINT button Allows the report to be printed PROCESS GRAPH Graphic display of the harvest process USER ID The name of the user that was logged into the software when the data was downloaded Page 29 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual DATA TRANSFER TIME CONTROL MODULE CENTRIFUGE DISPOSABLE CARTRIDGE LOT DISPOSABLE CARTRIDGE EXPIRATION DATE USER NOTES DEPLETION VALVE OPEN DURATION HARVEST VALVE OPEN DURATION HARVE
5. 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual pi SynGen Complete the LOT QUANTITY ACTIVE STATUS and EXPIRATION DATE in the format yyyy mm fields and select the DATE RECEIVED from the dropdown menu The software will not accept an expiration date from the past or a date received from the future An expired lot will not be available for download and will not appear in the download dropdown menu Click the SAVE CARTRIDGE button to save the Disposable Cartridge information or click the CLEAR button to clear the entry Verify that the Disposable Cartridge information is displayed in the table Only the quantity and active status may be edited once the Disposable Cartridge information has been entered Click the appropriate lot number to display the edit fields Unchecking the ACTIVE checkbox will inactivate the lot number Inactive lot numbers will not appear in the DOWNLOAD dropdown menu option Enter the quantity in the QUANTITY field as applicable To save changes click the SAVE CARTRIDGE button or click the CLEAR button to clear all changes made Editing Preferences i Ze Page 39 Click the PREFERENCES button on the lower left navigation pane The PREFERENCES window will appear A A E A MA Preferences 2 Admin Administrator LOGOUT Automatic logout Password Y Log out after inactivity Old password New password Timeout 104 minutes Confirm new passwor
6. 18 2015 SynGenX 2000 System User Manual SY TM G SynGen 5 Weigh and balance the Disposable Cartridge Control Module assembly 6 It is recommended to run the centrifuge with all of the buckets loaded Counterweights should be used for any bucket not containing a Disposable Cartridge Control Module assembly 7 Balance the centrifuge buckets within 2g 8 Use the balancing rings for any bucket containing Disposable Cartridge Control Module assembly as needed Do not use anything other than the balance rings for balancing 9 Place balance rings if needed on the inside the rim of the centrifuge bucket with the Disposable Cartridge Control Module assembly Balance ring Page 53 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual TM SynGen Centrifugation 1 Grasp the Disposable Cartridge Control Module assembly and maintain a vertical alignment to lower the assembly into the centrifuge bucket Page 54 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SY TM G SynGen 2 Ensure that the air vent is oriented inward toward the rotor center of the centrifuge 3 Close the centrifuge lid 4 Select the program code that represents the pre programmed specifications or equivalent see below and press the START button e 2000 x g for 7 min at speed Brake on Accel set to 9 e 100x gfor 1 5 min at speed Brake on Decel set to 9 e 2000 x
7. Administrator Technician 1 ae Launch DataTrak software by double clicking the icon located on the desktop 2 In the USER ID and password fields enter the User ID admin and default password Admin 1 Click the SUBMIT button 4 If the User ID and or password is entered incorrectly an Unknown username or Incorrect password error will occur Click the CLEAR button to clear the entries Re enter the correct User ID and password then click the SUBMIT button 5 The password should be changed once initial login is accomplished Refer to the SETTING PREFERENCES section to change the password 6 A new user must be set up as a Supervisor or Lab Technician in order to be able to access the OPERATIONS mode of the software y Page 34 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual y TM SynGen Section 5 Operating Instructions SynGen DataTrak Administration Mode Only users with Administrator roles can access the software s ADMINISTRATION mode Verify all data entries prior to submitting as they cannot be edited once accepted by the software Exit the software completely once any entry field has been submitted or edited Software Login 1 Double click the SynGen DataTrak icon located on the desktop to launch the software 2 Enter Administrator User ID and the associated password then click the SUBMIT button 3 If the User ID is entered incorrectly an Invalid
8. Click the SUBMIT EDIT button to save the change 4 The report will now be displayed automatically after each download Adding User Notes a 1 To add comments to the report place the cursor into the USER NOTES field 2 Enter comment The SAVE USER NOTE button appears after initial entry 3 Click the SAVE USER NOTE button to retain the comment The comment is documented with the date time and logged in user for each entry saved Saving or Printing the File 1 To save the processing report as a PDF file click the SAVE AS PDF button 2 Select the file location and edit the file name as needed 3 Click the SAVE button 4 To print the processing report click the PRINT button 5 Verify the printer and click the PRINT button Page 43 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual Export SynGen 1 To export the processing report as a CSV file click the EXPORT button 2 Select the file location and edit the file name as needed 3 Click the SAVE button Reviewing the Report Only a Lab Supervisor may add a GRAPH REVIEWED BY signature to a processing report 1 Click the GRAPH REVIEWED BY dropdown menu and select a user name Click the SAVE button a oF a a a Setting Preferences To save the processing report as a PDF file click the SAVE AS PDF button Select the file location and edit the file name as needed To print the processing report click the PRINT button
9. MHz to 800 MHz d 2 3WP 800 MHz to 2 5 GHz Where P is the maximum output power rating of the transmitter in watts W according to the transmitter manufacturer and d is the recommended separation distance in meters m Radiated RE 3V m Field strengths from fixed RF transmitters as IEC 62000 4 3 80 MHz to determined by an electromagnetic site survey 2 9 GHz should be less than the compliance level in each frequency range Interference may occur in the vicinity of equipment marked with the following symbol A NOTE 1 At 80 MHz and 800 MHz the higher frequency range applies NOTE 2 These guidelines may not apply in all situations Electromagnetic propagation is affected by absorption and reflection from structures objects and people a Field strengths from fixed transmitters such as base stations for radio cellular cordless telephones and land mobile radios amateur radio AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy To assess the electromagnetic environment due to fixed RF transmitters an electromagnetic site survey should be considered If the measured field strength in the location in which the SynGenXTM 2000 is used exceeds the applicable RF compliance level above the SynGenX 2000 should be observed to verify normal operation If abnormal performance is observed additional measures may be necessary such as re orienting or relocating the SynGenX 2000 b Over the freque
10. N E E N ere er E A 57 Section 8 Maintenance Cleaning and DisinfectiON oocoocnoooncoonnnonncnnnnncnninonnnccnannnnnos 59 Sechon 9 Customer SCLV ICE muenari arial aint 60 Section 10 Troubleshoo E sesasi i ainia 61 SynGenX 2000 Disposable Cartridge Visual Inspection ivvciciinnniciaiin iia 61 Page 4 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual rf GS SynGen synGen X 2000 Control Module Alerts and Error COGS sisoiciaiiasica tremolo rides 61 SynGen DataTrak Software Download Error Message sssecscsiovsdsiorasansassvirsntsuveveteiveverstusdoonnusbes 62 Sample Retrieval from the Disposable CAV L110 O nivncsiprsenaraitc sonara drid tec 64 Obtaining Sample from RBC Depletion Chamber oonooccnnnccnonccnonccnonaccnnnncnannnnnnccnanccnnnacons 64 Obtaining Sample from Central Funnel Chambet eee eeseesseeeeneeeeseeeeseeceseeeesneens 64 Sad o A e oteeevosssansenssaneteccsucerstactexesees 65 omiten 2000 Disposable Cartridge at 65 SI A Ez EE E E TEE 65 ie DOO Dockino IO 67 Synen Data Mba gs eel MOI o 68 Computer System eg Ue menisco rostro sees noneecsns ii ii ikiiki 68 AP O e E E e o A 69 Section 12 WattaNiVacocnnidd arica 70 Page 5 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 1 Introduction The SynGenX 2000 System is a platelet separation system used for processing blood or a mixture of blood and bone marrow The
11. NOTE 2 These guidelines may not apply in all situations Electromagnetic propagation is affected by absorption and reflection from structures objects and people Page 15 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 3 SynGenX 2000 System Description The SynGenX 2000 System is composed of the following components Component Part Number SynGenX 2000 Disposable Cartridge SGI 0317 SynGenX 2000 Control Module with its associated firmware SGI 0046 SynGenX 2000 Docking Station with its associated firmware SGI 0120 SynGen DataTrak Software 2 0 3 23 SynGen provides the following suggested products for use with the SynGenX 2000 System Balance Ring SGI 0053 01 SGI 0053 02 Counter Balance Weight SGI 0419 Materials and equipment that are required but not supplied e 60 mL of anti coagulated blood or 60 mL of anti coagulated mixture of blood and bone marrow e Thermo Scientific Sorvall Legend XT or XTR Centrifuge with 750 mL buckets or equivalent e Computer e g desktop or laptop PC with Windows 7 or 8 1 Operating System and at least one available USB 2 0 port additional USB 2 0 port required for optional barcode scanner o For Windows 7 Operating Systems only USB 2 0 Ports are compatible with the DataTrak software e syringes e Labels SynGenX 2000 Disposable Cartridge The SynGenX 2000 Disposable Cartridge is a dedicated sterile pla
12. Page 48 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen 3 Place user provided Sample Label on the Disposable Cartridge on the flat area to the right of the lot number barcode Do not place the label at any other location as it may interfere with subsequent processing gt PN Sample Label Lot number y barcode label F Y The Sample Label barcode must be in ISBT or code 128 format to be compatible j y with the SynGenX DataTrak Software Filling the Disposable Cartridge 1 Obtain syringe filled with blood or a mixture of blood and bone marrow Mix syringe fully by rotating Page 49 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen 2 Remove and retain cap from sample input luer lock Attach syringe with sample to luer lock and inject sample through the clot filter and into the Disposable Cartridge Y Keep the SynGenX 2000 Disposable Cartridge upright during and after filling y to prevent liquids from entering the 0 2 micron air filter as this may affect airflow through the filter b 3 Once sample is completely dispensed into the Disposable Cartridge detach tubing with clot filter and place cap onto port Page 50 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual y TM SynGen 4 Discard syringe clot filter and tubing following standard laboratory
13. Voltage 2 4 15V Steady fully charged POWER BUTTON Press this button for approximately one 1 second to power ON the Control Module Press it for approximately three 3 seconds to power OFF the Control Module POWER STATUS INDICATOR Green if Control Module is powered on Not illuminated if Control Module is powered off STATUS DISPLAY Displays the status or error code of the Control Module Standard Status Codes are described below Refer to the Troubleshooting section for Error Codes and additional information Page 20 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual MN TM G SynGen CHARACTER DEFINITION PROCESS DESCRIPTION cc Ready to Operate The Control Module is ready for processing The process is has completed successfully The data needs to be downloaded in preparation for a new process ATTENTION INDICATOR Green if the Control Module is ready for processing or has successfully completed a centrifugation process Red if the Control Module has failed a centrifugation process has gone into an error state or the Control Module was powered down prior to downloading the data The operator should assess which of these situations has occurred and take appropriate actions to remedy SynGenX 2000 Docking Station The SynGenX 2000 Docking Station is a multifunctional system component that concurrently charges the battery of the Control Module and enables transmission of data to and
14. g for 1 min at speed Brake on Accel set to 9 e 100 x g for 30 sec at speed Brake on Decel set to 9 Do not exceed 2000 x g centrifugation at any time as an inappropriate transfer of blood between compartments may occur causing a loss of cell functionality and requiring the platelet rich plasma PRP to be discarded 5 Once centrifugation is complete open the centrifuge lid and carefully remove the Disposable Cartridge Control Module assembly 6 Verify that the Control Module displays a P in the window Page 55 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen 7 Ifa P is not displayed do not continue the process Refer to the Troubleshooting section for possible actions 8 Examine the Disposable Cartridge for the presence of liquid in all three chambers RBC depletion chamber the PRP chamber and the plasma in the central funnel chamber 9 If liquid is not present in all three chambers refer to the Troubleshooting section for possible actions 10 Carefully remove the Disposable Cartridge from the Control Module by squeezing both locking tabs and lifting straight up Page 56 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Obtaining PRP Sample 1 Obtain PRP Sample Access Tube tube is opposite of the label and release it gently from the three clamps 2 Gently massage the tubing where clamped to ensu
15. protocols for discarding biohazardous medical waste Preparing the Disposable Cartridge for Centrifugation Prior to starting centrifugation ensure the following Battery status indicator is green SynGenX 2000 Control Module is OFF before latching the SynGenX 2000 Disposable Cartridge Disposable Cartridge fully latched on the Control Module Control Module is turned ON and 0 is displayed in the STATUS DISPLAY window before centrifugation 1 Obtain a SynGenX 2000 Control Module and press the POWER button Verify that the battery status indicator is green If not charge the Control Module before proceeding Do not to insert any objects including fingers into the SynGenX 2000 Control Module while powering it on 2 Turn OFF the Control Module by pressing and holding the POWER button for approximately 3 seconds Confirm that there are no lighted indicators Page 51 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen 3 Place the Disposable Cartridge in the Control Module by aligning the lot number label with the center of the user interface label and then pushing down firmly Ensure that the Disposable Cartridge is fully latched to the Control Module 4 Briefly press the ON button to display a 0 in the STATUS DISPLAY window Proceed with processing only after verifying that a 0 is displayed Page 52 14 02 015 Revision D Effective 06
16. the sterile functionally closed SynGenX 2000 Disposable Cartridge for processing High speed and low speed centrifugation is used to separate platelets using a commercially available programmable centrifuge such as the Thermo Scientific Sorvall Legend XT or XTR or equivalent During the high speed portion of the centrifugation 2 000 x g the cells in the blood or blood bone marrow mixture are stratified by their densities into three components in the Disposable Cartridge 1 red blood cells 2 nucleated cells and platelets and 3 plasma The speed is then lowered to 100 x g and during this first low speed centrifugation the bulk of the red blood cells are directed to the red blood cell compartment The speed is increased briefly to 1 000 x g and finally lowered to 100 x g During the second low speed spin approximately 7 mL of the nucleated cells and platelets along with a small amount of red cells and plasma are directed to the PRP compartment of the Disposable Cartridge The bulk of plasma is retained in the central compartment of the cartridge Once the centrifuge cycle ends data collected during the centrifugation process can be downloaded to a host computer using the DataTrak software Page 6 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Symbol Key The following symbols and abbreviations are used on the SynGenX 2000 System device labeling packaging or within the User Manua
17. the Lab Supervisor and Lab Technician User profile DataTrak Software Description The DataTrak software is divided into two modes of functionality Administration and Operations Administration Mode The ADMINISTRATION mode includes two sections of operating functions Administration and Preferences The active section will be highlighted in yellow The Administration section provides the data record of users equipment and materials Once data is entered it cannot be deleted only edited or made inactive Click the LOGOUT button to exit the administrative area and return to the login screen Administration Section The Administration section includes the following selections on the left side of the display screen for administrative functions Selected sections will be highlighted in yellow Page 24 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen ecc ce Administration 2 Admin Administrator f LOGOUT SynGenX System Control Module Centrifuge Disposable Cartridge CryoPRO Workstation CryoPRO 2 Bag Set First Name Phone Number usero userrode FirstName LastName Phone number Active v AAA AA lt lt lt gt lt lt lt lt i As User Profile Includes the following fields for data entry USER ID LAST NAME FIRST NAME PHONE NUMBER USER ROLE and ACTIVE checkbox Entered user information is displayed in a table below t
18. 9 in the USA or 1 916 256 2423 international SynGenX 2000 Disposable Cartridge Visual Inspection The SynGenX 2000 Disposable Cartridge has been designed to be optically clear and provide excellent viewing of the separated liquid fractions in each of the three compartments described below e Central Funnel Compartment center compartment that will contain the plasma fraction e RBC Depletion Compartment side compartment next to the lot number label that will contain the RBC fraction e PRP Compartment side compartment opposite the lot number label that will contain the PRP fraction If liquid is not present in all three chambers determine if there are displayed errors on the SynGenX 2000 Control Module or error messages on the Processing Report from the SynGen DataTrak Software Follow instructions under Action by User for the indicated error or message In the event that liquids enter the SynGenX 2000 Control Module return the Control Module to SynGen Inc for service SynGenX 2000 Control Module Alerts and Error Codes The table below identities the displayed alerts and error codes for the Control Module and appropriate user actions DISPLAYED ERROR DESCRIPTION USER ACTION CHARACTER Data Present The data was not Download the data from the downloaded from the Control Module Control Module before powering down Cam failure The Control Module self test Do not use the Control Module has determi
19. ST TARGET VOLUME TEMPERATURE C GRAPH REVIEWED STATUS SynGen The date and time when the download occurred The ID of the Control Module used for the harvest process The serial number of the centrifuge used for the harvest process The lot number of the Disposable Cartridge used for the harvest process The Disposable Cartridge lot expiration date An area to add comments to the processing record A SAVE USER NOTE button appears after initial entry Click SAVE USER NOTE to retain the comment The time in seconds that Depletion Valve was open during the process The time in seconds that the Harvest Valve was open during the process The target harvest volume The minimum average and maximum temperatures that occurred within the centrifuge during processing Dropdown menu where the Lab Supervisor can provide an electronic review signature of the processing report M 14 02 015 Revision D Effective 06 18 2015 Page 30 SynGenX 2000 System User Manual QSynGen Preferences Section The PREFERENCES section allows the Lab Supervisor and Lab Technician users to configure the software as indicated below Each user can configure the software to their designated choices Click the SUBMIT EDIT button to accept the entry or the CANCEL button to cancel the entry SynGen DataTrak Lx Preferences 2 supervisor Lab Supervisor LOGOUT Preferences Automatic logout Password
20. SynGenX 2000 Control Module component of the system is a microprocessor controlled device which works in combination with the SynGenX 2000 Disposable Cartridge during centrifugation to direct the transfer of red cells and platelet rich plasma into separate compartments within the Disposable Cartridge After centrifugation the combination of the Disposable Cartridge and Control Module are placed on the SynGenX 2000 Docking Station to permit the downloading of processing data using the SynGen DataTrak software Indications for Use The SynGenX 2000 System for Platelet Separation is to be used in the clinical laboratory or intraoperatively at the point of care for the safe and rapid preparation of platelet rich plasma from a small sample of blood or a small mixture of blood and bone marrow The platelet rich plasma is mixed with autograft and or allograft bone prior to application to a bony defect for improving bone graft handling characteristics Statement Device testing was performed with a 2 1 ratio of blood bone marrow mixture Disclaimer The platelet rich plasma prepared by this system has not been evaluated for any clinical indications Platelet rich plasma prepared from a mixture of whole blood and bone marrow may contain higher levels of plasma free hemoglobin than platelet rich plasma prepared from whole blood Principles of Operation The sample of blood or mixture of blood and bone marrow to be processed is placed in
21. User ID error will occur If the password is entered incorrectly an Incorrect password error will occur Select Clear to clear both entries ensure that the user ID and password are correct then click the SUBMIT button Adding and Editing a User 1 pi Page 35 Verify that the USER PROFILE section on the left pane is highlighted Enter the appropriate information into the USER PROFILE fields hes PAX Ej SynGen DataTrak E x Administration 2 Admin Administrator LOGOUT User Profile SynGenX System Control Module Centrifuge User ID Technician Disposable Cartridge CryoPRO Workstation a Smith CryoPRO 2 Bag Set First Name Jerry Phone Number 123 456 7890 User m User Role FirstName LastName Phone Numbers Actve Admin Admin Admin Admin Vv Administrator Admin John Smith 123 456 7890 Supervisor Lab Supervisor Jenny Smith 123 456 7890 Select the applicable user role using the dropdown menu Verify that the ACTIVE checkbox is checked Click the ADD USER button to enter the user or the CANCEL button to clear the information A successful entry will display User saved successfully New users will be required to log in the first time using the default password The password may be changed in the PREFERENCES section of the software after initial login 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual QSynGen
22. VA 2 a ay SynGen Pie f E j A SynGenX 2000 System Platelet Processing System for Blood and Blood Bone Marrow Mix USER MANUAL 100 Howe Avenue Suite 185N Sacramento CA 95825 info syngeninc com Customer Service 1 916 706 0923 Fax 1 916 706 0832 SynGenX 2000 System User Manual M SynGen Copyright 2015 by SynGen Inc All rights reserved Permission is granted to the owner to make one copy for record retention and internal personal use This does not create a license to the owner under any copyright trademark patent or to other intellectual property right of SynGen Inc For additional copies of this manual contact SynGen Inc or your local representative Trademark SynGen Inc propriety trademarks are property of SynGen Inc and are protected under U S trademark laws and international treaties SynGen SynGenX 2000 and proprietary trademarks and service marks may not be used except as provided by law without prior written consent of SynGen Inc Sorvall and Legend are trademarks of Thermo Scientific Inc in the United States and or other countries Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and or other countries Intel is a trademark of the Intel Corporation in the United States and or other countries Luer Lok is a trademark of Becton and Dickinson Company SynGen Inc Sacr
23. amento CA USA Phone 916 706 0923 EC REP MDSS GmbH Schiffgraben 41 D 30175 Hannover CE It is strongly recommended that all users read this manual in its entirety before using the SynGenX 2000 System Page 2 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Table of Contents Section E Tint OC CE OM sissien eiaei n a EE E e 6 e a e E E E E A O 6 TOU PAPA UP o TES O 0 E EEA A T E 6 Pe ae Op CONG rst eats E ENE T E O T T E A E O 6 YOON a A EE EAE N A E T A T TE dis 7 P ONAN TES E aaron 9 Su is A E E 10 VIGO APP Po E E A AA AA E 10 COS E E N E A T A E 10 I E E E E AAE ip E a 11 Safely and EMC Comphance Information AAA PUE 0U o 0 O P o NE TATARE EEEa 12 en E E E 12 Section 3 SynGenX 2000 System Description eesssosessoeessoceessossssoesssoeessoesssossssos 16 SynGenX 2000 Disposable Cartridge rara a ri raras 16 Cen dao APM o AP e 17 SynGenX 2000 Disposable Cartridge Components iras cdias pta 17 SYNC CI 2000 Con Ol VOU ri A aa 19 Control Module Components ceecceesseeesssceeesseeesseeceeseeeesaneeeesaeceseeeessaeeesseeeeesaeeeesaeeess 19 User Interface A A e 20 E AI a A o o II A 21 On Gen M Data Trak SOON eR eR TONE na EEEE EREE O PU 23 DUDU U OI A o o E E E 23 ia AA e 23 CSET o A EE E e 23 DataTrak Software Descritor 24 adri tano Mode ult io 24 Operations Mode sessions 26 pin AA A on Cre N a cer E Terrie rrr rr ee Cerr
24. ar ere ern te 32 Section 4 Operating Instructions System Setup cccccsssscccsscsssecssseesssseeesseees 33 Ea Id A o EEEE ees loetednadost 33 Ut E O00 Control OG ooo dato pendientes 33 Ela ON AAA A ra UU ER EEES OEA EEEE Eo 33 Page 3 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen PA 34 Section 5 Operating Instructions SynGen DataTrak Administration Mode 35 SO UE LIS oa pt 35 AiO and aE Ser coa 35 escri a PI toi dao 36 Registering and Editing a SynGen X 2000 Control Modulada 36 Adding and menda od ECO O odo 37 Adding and Editing a SynGenX M 2000 Disposable Cartridge ooooooccnnnccnonnnnnnnnnonnnnnoncnnananno nao 38 Edi CO ia o 39 B E A Itaca 40 Section 6 Operating Instructions SynGen DataTrak Operations Mode 41 EN od 41 Downloading SynGenX 2000 Control Module Data oonncccnonccnnacinonnnnoncnnancnnnancnnoncnnoncrnonccnnns 41 PROCS SU VCO Sa E E A TAE O A 42 a e a E SO ENE AE ATE 42 Luncii KEPO On DIO WROTE apro 43 Seno Pro E o T AE E E A E A E E ATE 44 MO o ENEA E E E N A E E E A 45 Section 7 Operating Instructions SynGenX 2000 System Operation 46 e A A E T A AA O 46 E and a EEA O E A A E 46 EUA A E eer 46 o EEE EE 46 a E E A E N E ree 47 Preparing tel snoot 48 uta the Disposable CARA aaa E 49 Preparing the Disposable Cartridge for Centrifugation a einaavianens 51 CENEO N eer a ee E R A eee cre ee 54 B A A 1 5 0 E
25. asons other than those caused by defects in materials or manufacturing defect such as improper handling of the machine misuse accident or non compliance with the User Manual is not covered under the SynGen warranty program and such device will be replaced or repaired at the cost of the end user Any alterations or modification made to the device other than those made by SynGen will render the warranty null and void SynGen will not be responsible for any consequential or incidental damages resulting from device malfunction or loss of use of device SynGen shall under no circumstances be liable for consequential or economic damage that may be an indirect or direct consequence of a defective part Page 70 14 02 015 Revision D Effective 06 18 2015
26. d Starting admin item Expiration and maintenance warning User profile 1 2 Month s in advance Control module C Centrifuge Disposable Cartridge CryoPRO Workstation CryoPRO 2 Bag Set Click the LOG OUT AFTER INACTIVITY checkbox and select the appropriate time in minutes from the dropdown menu Select the STARTING ADMIN item from the options displayed The selected item will automatically appear upon after logging into the software Use the EXPIRATION AND MAINTENANCE WARNING up down keys to set the number and the dropdown menu for the days weeks or months 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen 6 To edit a password enter the current password the new password and confirm the new password by reentry The password must be between 8 and 20 characters and must include one number and one punctuation character 7 Click the SUBMIT EDIT button to save the changes or the CANCEL button to cancel all changes made Exiting Administration Mode 1 To exit the DataTrak System ADMINISTRATION mode click the LOGOUT icon in the upper right corner to return you to the initial login screen 2 To exit the software completely click the red X in the upper right section of the window Page 40 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual QSynGen Section 6 Operating Instructions SynGen DataTrak Op
27. d maintenance warning User profile 13 in advance Control module C Centrifuge Disposable Cartridge CryoPRO Workstation CryoPRO 2 Bag Set Automatic Logout Includes a LOG OUT AFTER INACTIVITY checkbox and an up down selection menu to configure a timeout from 10 to 500 minutes in 10 minute increments Starting Admin Item Includes selection buttons for the field displayed upon Admin login Password Includes the following entry fields for changing a login password OLD PASSWORD NEW PASSWORD and CONFIRM NEW PASSWORD Expiration and Calibration Warning Includes up and down keys and dropdown menu selection to designate the amount of advance notification of expiration and calibration due dates in days weeks or months Operations Mode The OPERATIONS mode includes the three sections of operating functions PROCESS HISTORY and PREFERENCES The PROCESS section allows the user to download the data from the SynGenX 2000 System components Users cannot edit the data Click the LOGOUT button to exit the OPERATIONS AREA and return to the LOGIN screen The PROCESS section includes the following process options for data entry Page 26 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Process Section gt 3 supervisor1 Lab Supervisor G LOGOUT SynGen Connected Docking Stations and Control Modules Docking Station ID ControlM
28. device with a sterile non pyrogenic fluid path Do not use 2 if packaging or product is damaged Do not re sterilize Operating Temperature 10 C lt Operating Temperature lt 35 C Operating Pressure 70 kPA lt Operating Pressure lt 106 kPA 526 3 mmHG lt Operating Pressure lt 797 mmHG Relative Humidity 10 lt Operating Storage Humidity lt 95 Storage Temperature 7 C lt Storage and Transport Temperature lt 50 C Storage Pressure 50 kPA lt Storage and Transport Pressure lt 106 kPA 376 mmHG lt Operating Pressure lt 797 mmHG Storage Humidity 10 lt Operating Storage and Transport Humidity lt 95 SynGenX 2000 Control Module 3 Kg Battery Voltage 3 7 volt nominal Battery Pack Lithium ion rechargeable Page 65 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual y ee S G TM G2SynGen CONTROL MODULE POWER INPUT Operating Temperature 10 C lt Operating Temperature lt 35 C Operating Pressure 70 kPA lt Operating Pressure lt 106 kPA 526 3 mmHG lt Operating Pressure lt 797 mmHG Relative Humidity 10 lt Operating Storage Humidity lt 95 Centrifugation Speed Nominal 50 2 000 RCF Storage Temperature 20 C lt Storage and Transport Temperature lt 70 C Storage Pressure 50 kPA lt Storage and Transport Pressure lt 106 kPA 376 mmHG lt Operating Pressure lt 797 mmHG Storage Humidity 10 lt Operating Stora
29. ems Guidance and manufacturer s declaration electromagnetic emissions for all ME EQUIPMENT and ME Systems The SynGenX 2000 System is intended for use in the electromagnetic environment specified below The customer or the user of the SynGenX 2000 System should assure that it is used in such an environment EMISSIONS TEST COMPLIANCE ELECTROMAGNETIC ENVIRONMENT GUIDANCE The SynGenX 2000 System uses RF energy only for its RF emissions internal function Therefore its RF emissions are very C out low and t likely t interf i ISPR 11 ow and are not likely to cause any interference in nearby electronic equipment RF emissions Harmonic The SynGenX 2000 System is suitable for use in all emissions IEC Class A establishments including domestic establishments 62000 3 2 and those directly connected to the public low voltage Voltage power supply network that supplies buildings used fluctuations flicker for domestic purposes fae Complies emissions EC 62000 3 3 Page 12 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Table B Guidance and manufacturer s declaration Electromagnetic Immunity for all Equipment and Systems Guidance and manufacturer s declaration electromagnetic emissions for all ME EQUIPMENT and ME Systems for all ME EQUIPMENT and ME SYSTEMS The SynGenX 2000 System is intended for use in the electromagnetic environment specified below The customer o
30. en Inc for service e Do not to insert any objects including fingers into the SynGenX 2000 Control Module while powered on or at any other time e Handle the SynGenX 2000 Docking Station with care e When connected to another device the overall system must be evaluated to IEC 60601 1 3rd edition by the end user e Avoid dropping any of the components of the SynGenX 2000 System as this may cause damage e Keep the SynGenX 2000 Disposable Cartridge upright during and after filling to prevent fluids from entering the 0 2 micron air filter as this may affect airflow through the filter Page 10 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual M SynGen e The SynGenX 2000 Control Module battery should be charged in the SynGenX 2000 Docking Station overnight or for at least 6 hours prior to initial use e Prior to starting the centrifugation process verify e The battery status indicator is green e The SynGenX 2000 Control Module is OFF before latching the SynGenX 2000 Disposable Cartridge e The SynGenX 2000 Disposable Cartridge is fully latched on the SynGenX 2000 Control Module e The SynGenX 2000 Control Module is turned ON and 0 is displayed in the STATUS DISPLAY of the SynGenX 2000 Control Module prior to centrifugation e Do not exceed 2000 x g centrifugation at any time as an inappropriate transfer of blood between compartments may occur causing a loss of cell functionality r
31. ents of the centrifuge cup prior to centrifugation They are provided in 2 5 and 7 4 gram weights Page 32 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 4 Operating Instructions System Setup SynGenX 2000 Docking Station Handle the SynGenX 2000 Docking Station with care 1 Plug in the data cable into the data port of the Docking Station and the USB 2 0 port of the host computer 2 Plug in the power cord into Docking Station and then into the appropriate electrical outlet 3 Verify that the POWER STATUS INDICATOR is lit red and place a Control Module on the Docking Station The Power Status Indicator will turn green upon successful connection between the Docking Station and Control Module The SynGenX 2000 Control Module battery should be charged in the SynGenX 2000 Docking Station overnight or for at least 6 hours prior to initial use SynGenX 2000 Control Module a Place Control Module in a Docking Station that is plugged into an electrical outlet Verify that the Docking Station POWER STATUS INDICATOR is green 6 Leave the Control Module charging in the Docking Station until the Control Module BATTERY STATUS INDICATOR remains green without blinking 4 SynGen DataTrak Software Ensure that the computer is virus free and has the latest update of the anti virus software prior to SynGen DataTrak Software installation Update the
32. equiring the platelet rich plasma PRP to be discarded e Only use the SynGen DataTrak software for downloading and storage of processing information e Ensure that the computer is virus free and has the latest update of the anti virus software prior to installing DataTrak e Update the operating system service pack and antivirus software on a regular basis e Do not leave the internet active while installing or using DataTrak e The user provided Sample Label barcode must be in ISBT or code 128 format to be compatible with the DataTrak Software Contraindications The use of the SynGenX 2000 System is contraindicated for a hemodynamically unstable or hypercoagulable patient Use of this product for pediatric patients should be approached carefully Withdrawing blood from pediatric patients should be done at a physician s specific direction with attention given to avoiding any significant reduction in the patient s blood volume Page 11 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Safety and EMC Compliance Information Safety Standards Regulations and recommendations contained in this document are in compliance with appropriate international safety standards This includes electrical instruments used in laboratory protection of laboratory staff and electrical safety Table A Guidance and manufacturer s declaration Electromagnetic Emission for all Equipment and Syst
33. erations Mode Logging In 1 Double click the DATATRAK icon located on the desktop to launch the software Ej SynGen DataTrak DataTrak Version 2 0 3 23 SynGen USER ID O m SynGenx 1000 SynGen Docking Station PASSWORD 2 Enter the appropriate User ID and Password 3 Click the SUBMIT button 4 If the User ID and or Password are entered incorrectly an Unknown username and or Incorrect password error will occur Click the CLEAR button to clear the entries Re enter the correct User ID and password then click the SUBMIT button Downloading SynGenX 2000 Control Module Data 1 Verify that the SynGenX 2000 Docking Station is connected to the computer via the USB cable Click the SYNGENX SYSTEM icon on the left navigation pane Place the Control Module in the Docking Station per instructions for use 4 Scan the Control Module barcode or enter the Control Module serial number and BLOOD UNIT ID 5 Select the appropriate SynGenX 2000 DISPOSABLE CARTRIDGE LOT and CENTRIFUGE serial number from the dropdown menu a N Page 41 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SY TM SynGen 6 A green check mark will indicate an acceptable entry A red X will indicate an unacceptable entry Verify any information associated with a red X and re enter as appropriate Process 8 supenisort Lab Supenisor Process SvnGenXx Syste Con
34. ffective 06 18 2015 SynGenX 2000 System User Manual 10 11 12 13 SynGen The REGISTER CONTROL MODULE window will appear Scan or type the serial number of the Control Module and select the received date from the dropdown menu The default will be the current date Click the REGISTER button to register the Control Module Click the CANCEL button to exit without registering Verify that the Control Module information is displayed in the table To inactivate a Control Module click the ID of the appropriate Control Module in the table The Control Module edit fields will appear Only the ACTIVE STATUS and the LAST MAINTENANCE fields may be edited Click the ACTIVE checkbox to uncheck Inactive Control Modules will be not recognized for data download Click the SUBMIT EDIT button to inactivate or click the CANCEL button to cancel the edit To return a Control Module into use after maintenance click the ID of the appropriate Control Module in the table Click the ACTIVE checkbox to check and then select the LAST MAINTENANCE date from the dropdown menu Click the SUBMIT EDIT button to activate the Control Module or click the CANCEL button to cancel the edit Adding and Inactivating a Centrifuge 1 Click CENTRIFUGE on the left navigation pane a Ej SynGen DataTrak C Le a Administration 2 Admin Administrator Page 37 User Profile SynGenX System Centrifuge Co
35. from the Control Module and a host PC Each Docking Station holds one Control Module at a time Four Docking Stations can be connected in series and powered by a single cable to allow only charging of up to four Control Modules simultaneously Pogo Pins User Interface Docking Station REF SGI 0120 acon LOMO SN 103 100001 Se AUCE a Data Port Device information label Power Cord Connector Port Page 21 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen The components of the Docking Station are described below Pogo pins Retractable pins which align and contact with electrical connectors on the bottom of the docked Control Module for data communication and battery charging These pins are inactive when no Control Module is docked User interface label Identifies the device and allows the user to see an LED with three states e Green if a Control Module is present and charging e Red if no Control Module is present or is present but not seated properly or Control Module is not functional The operator should assess which of these situations has occurred and take appropriate actions to remedy e Not illuminated if the Docking Station is not receiving power Docking Station Connector Port Allows for side by side linking with up to four Docking Stations The connectors are located on each side of the Docking Station Data Port Port for connection to the host c
36. ge and Transport Humidity lt 95 Page 66 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual i SynGen SynGenX 2000 Docking Station DC Input Current 4 0A lt 4 docking stations connected in series Power Supply DC Output Voltage DC Output Current AC Input Voltage Frequency Power Consumption 100 240 VAC 50 60 Hz 1 0 0 6A Operating Temperature 10 C lt Operating Temperature lt 35 C Operating Pressure 70 kPA lt Operating Pressure lt 106 kPA 526 3 mmHG lt Operating Pressure lt 797 mmHG Relative Humidity 10 lt Operating Storage Humidity lt 95 Storage Temperature Storage Pressure Storage Humidity Page 67 20 C lt Storage and Transport Temperature lt 70 C 50 kPA lt Storage and Transport Pressure lt 106 kPA 376 mmHG lt Operating Pressure lt 797 mmHG 10 lt Operating Storage and Transport Humidity lt 95 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen SynGen DataTrak Software Computer System Requirements A computer printer USB hub and barcode scanner are not provided with the software A SynGen representative will install and configure the software application for customer use The minimum required computer specifications are e Windows 7 or 8 1 Operating System e Microsoft Net Framework 4 0 e Minimum Intel Core i5 1 7 GHz processor or equivalent e Mi
37. h two motor gear cam assemblies that rotate in order to operate an apparatus that is integrated into the Disposable Cartridge and pinches or releases tubing to direct the stratified red blood cells and PRP to their respective compartments The Control Module is also equipped with an accelerometer to measure acceleration and four optical sensors that detect interfaces between the RBC and Mononuclear Cell populations all powered by a lithium ion battery The paired sensor can detect the boundary between the concentrated red blood cell layer and the PRP layer when the passage of infrared light is blocked then unblocked The Control Module uses the detected boundary to open and close the transfer tubes in the Disposable Cartridge The Control Module firmware is the computer code that provides the operating instructions to the electromechanical components of the Control Module It also gathers and stores information available to the user during each PRP harvest run e g the output of the accelerometer timing and duration of the pinch and release of the red blood cell and PRP transfer tubes This collected data serves to document each centrifugation run Control Module Components Optical Sensors Receivers Latch Point for Disposable Cartridge Latch Point Electrical Connectors for Pogo Pins SGI 0046 O synGen HINDI syncon in SN 102 100001 User Interface Label Device Information Label Page 19 14 02 015 Re
38. harge the Control Module Out of FRAM Control Module ran out of memory to Verify that centrifuge cycle record processing data times are set properly and contact SynGen Customer Service for further troubleshooting Sample Retrieval from the Disposable Cartridge This section describes the steps to perform in the event that the separated components need to be removed from the individual Disposable Cartridge compartments for either reprocessing for sample analysis Obtaining Sample from RBC Depletion Chamber Gently mix the Disposable Cartridge with a rocking motion Release the RBC sample access tube from the three clamps Gently massage the tubing where clamped to ensure they are fully open Remove cap from RBC Sample access tube and attach a syringe Carefully withdraw the RBC sample Tilt the Disposable Cartridge as needed to ensure that all of the RBC is obtained Obtaining Sample from Central Funnel Chamber Remove the cap from the sample inlet port of the Disposable Cartridge and attach a syringe Carefully withdraw the plasma sample Tilt the Disposable Cartridge as needed to ensure that all of the plasma is withdrawn Page 64 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 11 Specifications SynGenX 2000 Disposable Cartridge ig emp Sterilization method by Gamma Irradiation manufacturer Single use only The SynGenX 2000 Disposable Cartridge is a single use
39. he data entry fields Control Module Primary screen displays a REGISTER CONTROL MODULE button and a table with the registered Control Module ID receipt date and Active state Clicking the REGISTER CONTROL MODULE button displays the REGISTER CONTROL MODULE field which includes a field for the S N barcode of the Control Module DATE RECEIVED dropdown menu and a REGISTER button Centrifuge Includes the following fields for data entry CENTRIFUGE SERIAL NUMBER DESCRIPTION CALIBRATION DUE DATE dropdown menu and ACTIVE checkbox Entered centrifuge information is displayed in a table below the data entry fields Disposable Cartridge Includes the following fields for data entry DISPOSABLE CARTRIDGE LOT NUMBER QUANTITY EXPIRATION DATE dropdown menu LOT RECEIVED DATE dropdown menu and ACTIVE checkbox Entered Disposable Cartridge information is displayed in a table below the data entry fields Preferences Section The PREFERENCES section allows the Administrator User to configure the software as indicated below Click the SUBMIT EDIT button to accept the entry or the CANCEL button to cancel the entry Page 25 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual eee see cero a O Preferences Preferences Automatic logout Password Y Log out after inactivity Old password New password Timeout 1024 minutes Confirm new password FO gt Starting admin item A an
40. inch valve will automatically close when the Disposable Cartridge is removed from the Control Module Contact SynGen Customer Service and return Control Module for service Place the same loaded Disposable Cartridge on a new Control Module and repeat the run Contact SynGen Customer Service and return Control Module for service The PRP should be obtained as intended The pinch valve will automatically close when the Disposable Cartridge is removed from the Control Module Contact SynGen Customer Service and return Control Module for service Discard the sample as cell quality may be affected Contact SynGen Customer Service and report the incident Page 63 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen ERROR MESSAGE DESCRIPTION ACTION BY USER Valve The RBC depletion took longer than Discard the sample as cell acceleration expected due to a possible obstruction quality may be affected exceeded in the transfer tubing Contact SynGen Customer Transfer was not complete when the Service and report the incident PRP harvest began and the centrifuge accelerated to 2000 x g The g force may be sufficient to dislodge the obstruction and allow high velocity passage of the cells Valve battery Battery did not have sufficient charge to Place the same loaded threshold error rotate cam Disposable Cartridge on a new Control Module and repeat the run C
41. ing is a statement that alerts the user to the possibility of injury death or other serious adverse reactions associated with the use or misuse of the device READ THIS USER MANUAL COMPLETELY PRIOR TO USING THE SYNGENX 2000 SYSTEM Rx ONLY e Federal law USA restricts this device to sale by or on the order of a physician e Always follow internal policy for personal protective equipment such as gloves gowns eyewear or masks when using the SynGenX 2000 System e Always follow established procedures for handling biohazardous materials e The SynGenX 2000 Disposable Cartridge is a single use device with a sterile non pyrogenic fluid path Do not use if packaging or product is damaged Do not re sterilize e No modification of this equipment is allowed Only SynGen authorized replacement parts may be used Cautions N A caution is a statement that alerts the user to the possibility of a problem with the device associated with its use or misuse Such problems include device malfunction device failure damage to the device or damage to other property The caution statement includes the precaution that should be taken to avoid the hazard e Follow aseptic procedures e Operators should be trained on the SynGenX 2000 System prior to initial use e Avoid liquid contact with the SynGenX 2000 Control Module internal components In the event that liquids enter the SynGenX 2000 Control Module return the Control Module to SynG
42. l SYMBOL MEANING Sterile fluid path sterilization by irradiation A D p Red if exposed to gamma irradiation Authorized Representative for European Union Product or Part Number Lot Number Serial Number Warning to be observed by the user Caution to be observed by the user A A note to be observed by the user Page 7 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual AS Pressure Prescription Use Only Do Not Use If Package Is Damaged Consult Instructions For Use Manufactured For Direct Current Negative Tip Polarity Page 8 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Abbreviations Below are abbreviations that are used in the User Manual and their associated definitions Abbreviation Definition Control Module Comma Separated Value Disposable Cartridge Docking Station International Electro Technical Commission Light Emitting Diode O ME Manufacturer s Equipment CM CSV DC DS IEC LED ME MN PC PD PRP RC RF RPM RBC xg Mononuclear Cells Personal Computer Portable Document Format C F Platelet Rich Plasma F Relative Centrifugal Force or G Force Revolutions Per Minute Radio Frequency Bo Gravitational Acceleration Force Page 9 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 2 Safety Warnings A A warn
43. lasma can be obtained SynGenX 2000 Disposable Cartridge Components c 3 A 4 j l P y j A d F X a y E E n D j A The Air Filter is 0 2 micron hydrophobic filter that facilitates air management during filling B The Disposable Cartridge Housing contains the individual harvest compartments RBC and PRP the central funnel compartment and integrated pinch mechanisms C The Sample Access Tube s are for the collection of PRP or RBC samples the RBC sample access tube is located adjacent to lot number label while the PRP sample access tube is located on the opposite side of the lot number label D The Sample Input Luer Lok is a female luer lock onto which the blood or blood and bone marrow mix is added to the Disposable Cartridge via a syringe E The Hydrophilic Filter is a 0 2 micron hydrophilic filter for addition of solutions if applicable Page 17 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual PA TM SynGen F The Clot Filter is a 150 micron filter to remove particles greater than 150 microns from blood or blood and bone marrow mix during sample input G A ratchet Clamp is used to control fluid flow Page 18 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen SynGenX 2000 Control Module The SynGenX 2000 Control Module is a battery operated microprocessor controlled electromechanical device wit
44. ls Equipment e SynGenX 2000 Control Module e SynGenX 2000 Docking Station e Thermo Scientific Sorvall Legend XT or XTR centrifuge or equivalent e Cord Blood Unit ID Label Generator e Digital Scale e Computer with SynGen DataTrak Software Materials e SynGenX 2000 Disposable Cartridge e Balance Rings e Syringes e Labels Page 46 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual QSynGen Process Flow 1 Transfer blood or a mixture of blood and bone marrow to the Disposable o Cartridge Latch Disposable Cartridge onto Control Module and centrifuge for approximately 15 minutes 3 Withdraw the PRP by syringe 4 Place Control Module in Docking Station and download processing data Page 47 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Preparing the Disposable Cartridge A Always follow established procedures for handling and disposing of biohazardous materials 1 Remove the SynGenX 2000 Disposable Cartridge from its packaging Visually inspect Disposable Cartridge and confirm that the gamma irradiation symbol is red A The SynGenX 2000 Disposable Cartridge is a single use device with a sterile non pyrogenic fluid path Do not use if packaging or product is damaged or components are missing Do not re sterilize 2 Remove cap from air filter and discard
45. ncy range 150 kHz to 80 MHz field strengths should be less than 3 V m Page 14 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual A SynGen Table D Equipment with which the SynGenX 2000 System has been tested in stacked or adjacent configuration Recommended separation distances between portable and mobile RF communications equipment and the SynGenX 2000 System The SynGenX 2000 System is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled The customer or the user of the SynGenX 2000 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment transmitters and the SynGenX 2000 System as recommended below according to the maximum output power of the communications equipment SEPARATION DISTANCE ACCORDING TO FREQUENCY OF TRANSMITTER RATED MAXIMUM OUTPUT POWER OF TRANSMITTER 150 KHZ TO 80 MHZ 80 MHZ TO 800 MHZ 800 MHZ TO 2 5 GHZ D 1 2 VP D 1 2 VP D 2 3 VP For transmitters rated at a maximum output power not listed above the recommended separation distance d in meters M can be estimated using the equation applicable to the frequency of the transmitter where P is the maximum output power rating of the transmitter in watts W according to the transmitter manufacturer NOTE 1 At 80 MHz and 800 MHz the separation distance for the higher frequency range applies
46. nected Docking Stations and Control Modules Docking Station ID ControlModulelD a Control Module 102 100196 Y amp a Blood Unit ID IF5 Disposable Cartridge Lot 70635 0000 Y Centrifuge Y CryoPRO Workstation DOWNLOAD CLEAR 7 Click the DOWNLOAD button to download the data located on the Control Module or click the CLEAR button to clear the fields Processing Reports Data collected by the Control Module is downloaded into the DataTrak software This data can be viewed in report format by e Accessing the report through the HISTORY section e Configuring the report to launch upon download Accessing the History Section 1 Click the appropriate icon e g SYNGENX SYSTEM on the left navigation pane to highlight Page 42 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual y A TM G SynGen 2 Click HISTORY on the lower left navigation pane synGenX Data Drag a column header here to group by that column Blood Unit ID User Name Data Transfer Time 7 Cartridge Lot Centrifuge Control Module ID f 123456789 labtech 1 12 23 14 09 54 57 72979 0000 41559969 102 100116 3 Click the BLOOD UNIT ID of the report to be viewed The report is displayed in a new window Launch Report on Download Click the PREFERENCES section on the lower left navigation pane 2 Check the checkbox next to SHOW REPORT AFTER DOWNLOAD under the DOWNLOAD PREFERENCES area
47. ned that the cam has failed to for processing reset to starting position Contact SynGen Customer Service and return Control Module for service bL Battery Low There is insufficient power Charge the Control Module for a centrifugation process Page 61 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen DISPLAYED ERROR DESCRIPTION USER ACTION CHARACTER Fail The stratification depletion or Review the DataTrak harvest cycles have failed to complete Processing Report for the error message and appropriate user actions Calibration required The Control Module Do not use the Control Module needs to be calibrated to manufacturer s for processing specifications before it can be used for the i Contact SynGen Customer centrifugation process Service and return Control Module for service Blank Process error Review the DataTrak Processing Report for the error message and appropriate user actions no display SynGen DataTrak Software Download Error Message The table below identities the errors displayed on the Processing Report and appropriate user actions ERROR MESSAGE DESCRIPTION ACTION BY USER RBC valve open The RBC pinch valve has failed to open Place the same loaded failed when directed Disposable Cartridge on a new Control Module and repeat the run Contact SynGen Customer Service and return Control Module for service RBC valve cl
48. nimum 4 GB RAM of memory e Minimum Hard disk size of 120 GB e Minimum Hard disk free space of 100 GB dedicated to the SynGen Data Trak database e Atleast 2 available USB Ports o For Windows 7 Operating Systems only USB 2 0 Ports are compatible with the DataTrak software e CD or DVD drive The recommended required computer specifications are e Windows 7 or 8 1 Operating System e Microsoft Net Framework 4 0 e Minimum Intel Core i5 1 7 GHz processor or equivalent e Minimum 8 GB RAM of memory e Minimum Hard disk size of 500 GB e Minimum Hard disk free space of 200 GB dedicated to the SynGen DataTrak database e Atleast 2 available USB Ports o For Windows 7 Operating Systems only USB 2 0 Ports are compatible with the DataTrak software e CD or DVD drive All data captured by DataTrak is stored within a database The storage size requirements for this database are dependent on the number of samples run in a year Guidelines for annual requirements of data storage NUMBER OF PROCESSES SAMPLES ESTIMATED STORAGE REQUIRED ESTIMATED STORAGE REQUIRED RUN IN AN YEAR FOR 1 YEAR OF DATA FOR 5 YEARS OF DATA 2500 10 GB 20000 40 GB 25000 18 GB 90 GB 50000 35 GB 175 GB Page 68 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual AN d SynGen ly Centrifuge To ensure proper operation of the SynGenX 2000 System the Thermo Fisher Scientific Sorvall Legend XT or XTR tabletop cen
49. ntrol Module Disposable Cartridge CryoPRO Workstation Serial Number CryoPRO 2 Bag Set Description EA 12 23 2015 Lab i Centrifuge 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual 2 SynGen Enter the serial number and description optional Serial Number Calibration Due Date Description ba Select the CALIBRATION DUE DATE from the dropdown menu The software will not accept calibration due dates from the past The ACTIVE button is checked by default To inactivate click the ACTIVE checkbox Click the SAVE CENTRIFUGE button to save the centrifuge information or the CLEAR button to clear the entry Verify that the centrifuge information is displayed in the table To make the centrifuge inactive click the appropriate SERIAL NUMBER of the centrifuge in the table Click the ACTIVE checkbox to uncheck Inactive centrifuges will not appear in the download dropdown menu option To save the change click the SAVE CENTRIFUGE button or click the CLEAR button to clear the change Adding and Editing a SynGenX 2000 Disposable Cartridge L Page 38 Click DISPOSABLE CARTRIDGE on the left navigation pane f E SynGen DataTrak 3 Admin Administrator User Profile SynGenX System Control Module Disposable Cartridge Centrifuge CryoPRO Workstation Expiration Date yyyy mm CryoPRO 2 Bag Set Date Received y 136
50. oduleID DataPresent r amp ua A Control Module a Blood Unit ID Disposable Cartridge Lot gt CryoPRO Workstation Centrifuge SynGenX System Select the SynGenX System picture to display the CONTROL MODULE DOWNLOAD field which includes the following required entries for download CONTROL MODULE SERIAL NUMBER BLOOD UNIT ID DISPOSABLE CARTRIDGE dropdown menu and CENTRIFUGE dropdown menu A green checkmark will indicate a valid entry and a red X will indicate an invalid entry for the Control Module serial number the Centrifuge serial number and the Disposable Cartridge Lot number Page 27 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen History Section The HISTORY section will display the data records for selected component 1 e if the SYNGENX SYSTEM SECTION is selected the download data from the Control Modules will be listed if the CRYOPRO WORKSTATION section is selected the download data from the Workstation will be listed To review a processing report click the appropriate Blood Unit ID SynGenX Data Drag a column header here to group by that column Blood Unit ID User Name Data Transfer Time 7 Cartridge Lot Centrifuge Control Module ID 123456789 labtech1 12 23 14 09 54 57 72979 0000 41559969 102 100116 r amp Ai a CryoPRO Workstation Page 28 14 02 015 Revision D Effective 06 18 2015 SynGenX
51. oftware users should be familiar with the applicable SynGenX 2000 System components prior to using the DataTrak software The DataTrak software is not intended for use with computer system specifications other than those listed in the Computer System Requirements The DataTrak software is used with two other SynGen products the CryoPRO Workstation and the CryoPRO 2 Bag Set These products are not part of the SynGenX 2000 System and are not covered in this User Manual User Profiles The DataTrak software has three user profiles that are designed to restrict software operations based on level of responsibility Page 23 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Lab Technician User The Lab Technician User can download the data from the SynGenX 2000 System components view the data history customize their software views and change their password Lab Supervisor User The Lab Supervisor User level has all of the abilities of the Lab Technician User profile but includes the ability to approve reports Administrator User The Administrator User profile is a management function level only The Administrator User can add edit or inactivate users serial numbers of the system equipment and lot numbers of the disposable components The Administrator User does not have the ability to download data from the SynGenX 2000 System components or view data history This ability is restricted to
52. omer Service at 844 363 0709 in the USA or at 1 916 256 2423 international or send an email to support syngeninc com Page 59 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual M Q SynGen Section 9 Customer Service All SynGenX 2000 Systems purchased will be supplied with a copy of the User Manual In addition professional and competent technical staff will provide end user training prior to the system s use and will always be available for specific questions or clarifications For assistance with technical or application issues please contact your account representative or SynGen Customer Service at 844 363 0709 in the USA or at 1 916 256 2423 international or send an email to support syngeninc com Contact hours for SynGen Customer Service are 09 00 to 17 00 Pacific Time Email submissions will be responded to within 1 business day of receipt SynGen Inc 100 Howe Avenue Suite 185N Sacramento CA 95825 Email support syngeninc com Customer Service 844 363 0709 in the USA or at 1 916 256 2423 international Fax 1 916 706 0832 Page 60 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 10 Troubleshooting The Troubleshooting section will describe appropriate steps to take in the event that a processing run did not perform as intended For additional troubleshooting or technical assistance contact 844 363 070
53. omputer via the data cable Power Cord Port Port for connection to the external power source via the power cable To remove mains power unplug the cable from the wall Connector Port Cover Protects an unused Docking Station Connector Port It may be removed by taking out the two screws in the cover Device information label Provides information specific to the Docking Station as well as SynGen Inc contact information Link bracket Provided on every Docking Station to lock together the side by side linked Docking Stations Page 22 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual A TM OSynGen SynGen DataTrak Software Introduction The SynGen DataTrak software is the application code that provides the interface between the operator and the SynGenX 2000 System through a host computer It downloads processing and system information and stores it in a database on the host computer The data collected includes information gathered during each processing run and serves as a means to support current CGMP compliance The SynGen DataTrak System software includes the Microsoft MS SQL Server 2008 R2 Express Edition as the database server for a host computer Fx SynGen DataTrak DataTrak Version 2 0 3 23 SynGen USER ID a m SynGenX 1000 SynGen Docking Station PASSWORD Intended Use The DataTrak software is intended for use with SynGenX 2000 System components only S
54. operating system service pack and anti virus software on a regular basis Do not leave the internet active while installing or using the DataTrak Software 1 Verify that the computer meets SynGen DataTrak Software requirements 2 Verify that all updates have been completed 3 Ensure that administrator access is available The software will be installed by a SynGen Inc technical representative 4 The users components of the SynGenX 2000 System and centrifuges must be entered into the software before processing data can be downloaded Follow the directions described in the Operating Instruction DataTrak Administration section to prepare the software 5 If not already completed attach the associated SynGenX 2000 System components i e the Docking Station to the host computer via the USB 2 0 ports or USB hub Page 33 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual AN d SynGen ly Initial Login The DataTrak software is programmed with a default name and password for the Administrator profile and default passwords for Lab Supervisor and Lab Technician profiles to allow initial access to the software The first login will require the default name and password for Administrators and the default password for Lab Supervisors and Lab Technicians User Profile User ID Password Administrator admin Admin 1 Lab Supervisor Assigned by Administrator Supervisor 1 Lab Technician Assigned by
55. or months 9 Click the SUBMIT EDIT button to save the changes or click the CANCEL button to cancel all changes made Logging Out amp Exiting 1 To log out of the DataTrak program select LOGOUT in the upper right corner which will return you to the initial login screen Preferences y Automatic logout Password Y Log out after inactivity Old password New password Timeout 104 minutes Confirm new password o c Starting top level item Starting device History Control Module c Cops CryoPRO Workstation Download preferences Expiration and maintenance warning Show report after download 13 Month s v in advance oe 2 To exit the DataTrak program close the window by selecting the red X in the upper right corner of the window Page 45 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 7 Operating Instructions SynGenX 2000 System Operation A It is strongly recommended that users review the entire manual and operating instructions prior to initial system use Follow aseptic procedures Operators should be trained on the SynGenX 2000 System prior to initial use Acceptable Processing Volume The SynGenX 2000 System is intended to process 60 mL of anti coagulated blood or 60 mL of anti coagulated mixture of blood and bone marrow Equipment and Materia
56. ose The RBC pinch valve failed to close Under the discretion of a failed when directed physician the contents of the individual compartments may be aseptically added to new Disposable Cartridge and rerun using a new Control Module Refer to Sample Retrieval Section Contact SynGen Customer Service and return Control Module for service Page 62 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual ERROR MESSAGE DESCRIPTION PRP valve open The PRP pinch valve failed to open failed when directed and the PRP harvest did not take place PRP valve close The PRP pinch valve failed to close failed when directed The target volume of PRP will be exceeded Accelerometer The accelerometer failed to update the Timeout processor at the start of the centrifugation process so no cells were depleted or harvested Harvest Timeout The PRP pinch valve failed to close when directed The target volume of PRP will be exceeded Dock Abort During the 2000 x g stratification portion of the spin cycle one of pinch valves did not fully clamp the tubing allowing the blood in the central funnel compartment to pass through the transfer tubing at too high a flow rate SynGen ACTION BY USER Place the same loaded Disposable Cartridge on a new Control Module and repeat the run Contact SynGen Customer Service and return Control Module for service The PRP should be obtained as intended The p
57. ower quality should be that of a typical commercial or hospital environment If the user of the SynGenX 2000 requires continued operation during power mains interruptions it is recommended that the SynGenX 2000 be powered from an uninterruptible power supply or a battery Power frequency magnetic fields should be at levels characteristic of a typical location in a typical commercial or hospital environment NOTE UT is the A C mains voltage prior to application of the test level Page 13 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Table C Guidance and manufacturer s declaration Electromagnetic Immunity for Equipment and Systems that are not Life Supporting Guidance and manufacturer s declaration electromagnetic immunity The SynGenX 2000 System is intended for use in the electromagnetic environment specified below The customer or the user of the SynGenX 2000 System should assure that it is used in such an environment IEC 60601 COMPLIANCE IMMUNITY TEST ELECTROMAGNETIC ENVIRONMENT GUIDANCE TEST LEVEL LEVEL Portable and mobile RF communications equipment should be used no closer to any part of the SynGenX 2000 including cables than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter Recommended separation distance d 1 2 VP Conducted RF 3 Vrms IEC 62000 4 6 150 kHz to 80 MHz d 1 2 VP 80
58. r the user of the SynGenX 2000 System should assure that it is used in such an environment IEC 60601 TEST COMPLIANCE IMMUNITY TEST LEVEL LEVEL Electrostatic discharge ESD IEC 62000 4 2 Electrical fast transient burst IEC 62000 4 4 Surge IEC 62000 4 5 Voltage dips short interruptions and voltage variations on power supply input lines IEC 62000 4 11 Power frequency 50 60 Hz magnetic field TEC 62000 4 8 6 kV contact 8 kV air 2 kV for power supply lines 1 kV for input output lines 1 kV line s to line s 2 kV line s to earth lt 5 UT gt 95 dip in UT for 0 5 cycle 40 UT 60 dip in UT for 5 cycles 70 UT 30 dip in UT for 25 cycles lt 5 UT gt 95 dip in UT for 5s 6 kV contact 8kV air 2 kV for power supply lines 1 kV for input output lines 1 kV line s to line s 2 kV line s to earth lt 5 UT gt 95 dip in UT for 0 5 cycle 40 UT 60 dip in UT for 5 cycles 70 UT 30 dip in UT for 25 cycles lt 5 UT gt 95 dip in UT for5s ELECTROMAGNETIC ENVIRONMENT GUIDANCE Floors should be wood concrete or ceramic tile If floors are covered with synthetic material the relative humidity should be at least 30 Mains power quality should be that of a typical commercial or hospital environment Mains power quality should be that of a typical commercial or hospital environment Mains p
59. re it is fully open 3 Remove the cap on PRP Sample Access Tube connect the syringe to the tubing and withdraw the PRP from the PRP chamber MANU Page 57 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual Q SynGen 4 The PRP is now available for use as indicated Discard the Disposable Cartridge per established procedures for handling biohazardous materials Page 58 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual M Q SynGen Section 8 Maintenance Cleaning and Disinfection Always follow established procedures for handling and discarding biohazardous materials Prior to cleaning power down the SynGenX 2000 Control Module and unplug the SynGenX 2000 Docking Station For cleaning use a dry cloth or paper towel to wipe away any cell solution or other fluid that has not yet dried For disinfection wet a paper towel with a 10 bleach solution or a 70 isopropyl alcohol solution and wipe down all outside surfaces taking care not to allow cleaning solution to enter into Control Module Allow the wet surface to sit for 5 minutes before drying The Control Module should be returned to SynGen Inc annually for preventative maintenance Any electromechanical device disposal must follow local regulations If an error code is experienced first consult the Troubleshooting Section of this manual If the problem persists please call SynGen Cust
60. stic single use processing container for 60 mL of blood or a mixture of blood and bone marrow and comprises the fluid path of the system The blood or mixture of blood and bone marrow is transferred into the Disposable Cartridge through a 150 micron clot filter The Disposable Cartridge is placed into the SynGenX 2000 Control Module for subsequent centrifugation following a preprogrammed profile described below Integrated within the Disposable Cartridge are mechanisms that pinch or release the tubing allowing for transfer of the cellular components during centrifugation The Control Module manages this operation Page 16 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Centrifuge Profile e The centrifuge accelerates to 2000 x g and the blood or mixture of blood and bone marrow stratifies into a Red Blood Cell RBC layer a Platelet Rich Plasma PRP layer and a plasma layer in order of decreasing density e The centrifuge then lowers to 100 x g and the bulk of the RBCs are transferred through transfer tubing to the RBC compartment e The centrifuge then accelerates to 2000 x g for further stratification e The centrifuge then lowers to 100 x g and the PRP is transferred through transfer tubing to the PRP Compartment leaving the bulk of plasma retained in the processing compartment e The centrifuge decelerates and stops spinning the PRP can now be harvested and samples of the RBCs and p
61. trifuge or equivalent is recommended Information on the specific part numbers and accessories requires for the Thermo Fisher Scientific centrifuges can be found in the latest revision of document M 0021 Ordering a Thermo Scientific Sorvall Legend Centrifuge The centrifuge should be calibrated annually Follow Thermo Fisher Scientific Instruction Manuals for setup and operation of the centrifuge rotor and buckets Page 69 14 02 015 Revision D Effective 06 18 2015 SynGenX 2000 System User Manual SynGen Section 12 Warranty SynGen warrants to the original purchaser that the SynGenX 2000 Control Module and SynGenX 2000 Docking Station will be free from defects in material or workmanship for one 1 year from date of shipment SynGen also warrants that replacement parts will be free from defects in material workmanship for a period of ninety days 90 or maximum time required by applicable local law from date of shipment of replacement part SynGen products are designed and manufactured to provide trouble free and reliable performance when properly maintained and used in accordance with the instructions provided in this manual Each Control Module and Docking Station referred to as Device is carefully inspected and tested before shipping In case of device failure or malfunction SynGen will replace or repair the device concerned according to the agreement in place Device failure or malfunction for re
62. vision D Effective 06 18 2015 SynGenX 2000 System User Manual AN d SynGen ly The components of the Control Module are described below Optical Sensors and Receivers Four optical sensors and receivers that detect the cell interfaces during centrifugation Latch Point for Disposable Cartridges The three connections for latching the Disposable Cartridge to the Control Module Device Information Label Provides information specific to the Control Module as well as SynGen Inc contact information Electrical Connectors for Pogo Pins The connectors that make contact with the Docking Station Pogo Pins and facilitate data transmission and charging Serial Number Label Control Module barcode and human readable text label User Interface Label BATTERY STATUS INDICATOR POWER BUTTON STATUS DISPLAY ATTENTION INDICATOR POWER STATUS INDICATOR BATTERY STATUS INDICATOR Steady green if the battery has a sufficient charge to perform a harvest process Steady red if the battery is insufficiently charged The Operator should immediately charge the battery When the Control Module is placed on the Docking Station for charging the BATTERY STATUS INDICATOR will blink at the following rates in response to battery charge falling below the following thresholds e Battery Voltage lt 3 95V 1 blink pattern e Battery Voltage 2 3 95V and lt 4 1V 2 blink pattern e Battery Voltage 24 1V and lt 4 15V 3 blink pattern e Battery

SynGenX™-2000 System USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents

SynGenX&trade;-2000 System USER MANUAL

Contents

Download Pdf Manuals

Related Search

Related Contents

SynGenX™-2000 System USER MANUAL