Home

WAB-3003 108M 11g Outdoor PoE CPE/AP/Bridge

1. Accounting Port 11813 Accounting Interim Update Interval 6 second s fHome Logout 7Help E Status o Dynamic WEP By enabling this function the system will automatically generate WEP keys for encrption o WEK Key Length Select from 64 bit or 128 bit key length o Rekeying Period The time interval for the WEP key to be updated the time unit is in second 40 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge gt Primary RADIUS Server Settings o Host Enter the IP address or domain name of the RADIUS server o Authentication Port The port number used by the RADIUS server Specify a port number or use the default 1812 o Secret Key The secret key for the system to communicate with the RADIUS server o Accounting Service Enable or disable the accounting service o Accountin Port The port number used by the RADIUS server Specify a port number or use the default 1813 o Accounting Interim Update Interval The time interval for the accounting to be updated the time unit is in second o WPA PSK Provide shared key authenticaiton in WPA data encryption fiHome OLogout Help lb level ONE was 3003 wireless Outdoor CPE AP Repeater eS gt 8 o e System Wireless Firewall Utilities Status oN AN A MN O VAP Overview General VAP Config Security Repeater Y Advanced Access Control 4 Site Survey i Y Home Wireless gt Securit Security Settings Profile Name
2. Operating Mode Network Settings and Management Services Home OLogout 7 Help PE levelone wae 3003 wireless Outdoor CPE AP Repeater g gt 4 y o e system Wireless Firewall Utilities Status i r A 5 R System Information Operating Mode Network y Management 4 Home gt System gt General System Information Name WAB 3003 os Description Location Time Device Time 1999 12 31 16 21 55 Time Zone GMT 08 00 Pacific Time US amp Canada Tijuana I Time l Enable NTP Manually set up Set Date vear month pay Set Time m Hour amin sec am Note A system restart is required when a reminding message appears after clicking the SAVE button all settings entered and saved will take effect only after a system restart 78 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 1 1 System Information For maintenance purpose it is required to specify the system name its location and corresponding basic parameters Fields such as Name Description and Location are used for mnemonic purpose It A Home Logout 7 Help is recommended to have different values in each AP PE leve ONE was 3003 Wireless Outdoor CPE AP Repeater Ss tem Wireless Firewall Utilities Status h a j A 4 System Information Operating Mode Y Network Management Home gt System General System Information Name
3. WAB 3003 Description Location Time Device Time Time Zone Time Set Date 1999 12 31 16 21 55 GMT 08 00 Pacific Time US8iCanada Tijuana Enable NTP Manually set up eres Es Year Month pay Set Time Hour e Min sec o System Information For maintenance purpose it is recommended to have the following information stated as clearly as possible Fields Name Description and Location are used for mnemonic purpose It is recommended to have different values in each wireless device gt Name The system name used to identify this system gt Description Further information of the system gt Location Information about the geographical location of the system which can help the administrator locate it easily e Time Time settings allow the system time synchronized with NTP server or manually set gt Device Time Display the current time of the system gt Time Zone Select an appropriate time zone from the drop down list box 79 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge gt Synchronization Synchronize the system time either by NTP server or manual setup 1 Enable NTP By selecting Enable NTP WAB 3003 can synchronize its system time with the NTP server automatically While this method is chosen at least one NTP server s IP address or domain name must be provided If FQDN Full Qualified Domain Name is used as the IP address o
4. gt Click SAVE to activate all settings configured so far LAN Configuration gt The LAN Configuration section is on the same page as WAN Configuration section gt Enter the IP Address and Netmask of the LAN port gt Click SAVE to save all settings configured so far all updated settings will take effect upon reboot Congratulations The CPE mode Is now successfully configured 22 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 AP Mode Configuration When AP mode is activated the system can be configured as an Access Point or a Repeater or an Access Point with Repeater depending on deployment needs This chapter will guide you through setting up the AP mode with graphical illustrations The following table shows all the functions of WAB 3003 in its AP mode System VAP Overview Firewall Change System Information List Password Overview l l Service i Associate Operating Mode General Settings Network Utilities Client Status FUNCTION Network VAP Advanced Configuration Repeater Settings Configuration Save amp Restore Information Management Security Settings System Upgrade Event Log QoS Repeater Classification Settings Reboot Advanced Wireless Settings Access Control Settings Site Survey Table 4 1 AP Mode Functions 23 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge a level OnE was 3003 wireless Outdoor CPE AP Repeater gt amp System o o
5. A k 4 h s k 7 N var Overview WAP Config Security Repeater y Advanced Access Control J Site Survey A Home gt Wireless gt General Band Super G Short Preamble Channel Max Transmit Rate Transmit Power Beacon Interval General Settings 802 11b 802 11g E Bursting Fast Frames O Dynamic Turbo Disable Enable fx il Auto Auto w 100 100 500ms gt Click on the Wireless button and then select the General tab gt Band Select an appropriate band from the drop down list box f Home Logout 7 Help Ba E l evel nN e WAB 3003 Wireless Outdoor CPE AP Repeater gt Wireless System A A var Owerview A General VAP Config Y Security Home gt Wireless gt VAP Config VAP Profile Name E Status gt Utilities Y Firewall A 7 SHA A y 1 j Repeater Advanced y Access Control y Site Survey b k ii VAP Configuration vaP 1 Disable Enable Profile Name VAP 1 Esto teven WLAN ID save Click on the Wireless button and then select the VAP Config tab ESSI D Enter respective ESSID for each VAP in the ESSID field or use the default ESSI D VLAN ID Disable Enable 1 4094 Extended Service Set Identifier is a unique identifier used for networking devices to get gt gt associated with WAB 3003 Note For QoS classification please
6. CDP and VIP EtherType TEEES02 3 Interface Y From To VAP1 y DSAP SSAP aa Type 2000 ie IPv4 0800 SOUTCE MAC Address Mask Destination MAC Address Mask Action Y Block Pass Remark 57 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge gt gt To move a specific rule Mv in Setting column of firewall list will lead to the following page for re ordering confirmation After SAVE button is clicked and system reboot the order of rules will be updated fHome Logout 7 Help ln E evel O N e WAB 3003 Wireless Outdoor CPE AP Repeater 4 3 o E System Wireless lrewall Utilities Status Firewall List Servic Advanced A Home Firewall gt Move rule Move Rule ID 1 Move to Y Before After ID 1 20 58 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Please make sure all desired rules state of rule are checked and saved in overview page the rule will be enforced upon system reboot fi Home Logout 7Help a level OnE wae 3003 wireless Outdoor CPE AP Repeater e 1 y E System Wireless Birewall Utilities Wh Status Firewall List Service Advanced i Home gt Firewall gt Firewall List Layer 2 Firewall Settings Enable Layer 2 Firewall Disable Enable No State Action Name EtherType Remark Setting 1 DROP CDP and VTP IEEE 8023
7. VAP 1 Security Type WPA PSK e Cipher Suite TKIP WPA Pre shared Key Type PSK Hex 64 chars Y Passphrase 8 63 chars Pre shared Key Group Key Update Period 600 second s SAVE ER gt Cipher Suite Select an encryption method from TKIP WPA AES WPA TKIP WAPZ2 AES WAP2 or Mixed gt Pre shared Key Type Select a pre shared key type PSK Hex or Passphrase gt Pre shared Key Enter the key value for the pre shared key the format of the key value depends on the key type selected gt Group Key Update Period The time interval for the Group Key to be renewed the time unit is in second 41 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e WPA RADIUS Authenticate users by RADIUS and provide WPA data encryption ft Home Logout 7 Help SBE PE leve ONE was 3003 Wireless Outdoor CPE AP Repeater System WEEGEE Firewall Utilities Status VAP Overview N General M WAP Config Security Repeater t Advanced Y Access Control A Site Survey A Home gt Wireless Security Security Settings Profile Name vap 1 Security Type WPA RADIUS Cipher Suite TKIP WPA Group Key Update Period 600 second s PO RS Ser es Domain Name IP Address Authentication Port 1812 Secret Key Accounting Service Disable Enable Accounting Port 1812 ia Accounting Interim Update Interval second s cy SASS See Se Host
8. levelone WAB 3003 108M 11g Outdoor PoE CPE AP Bridge User s Manual v1 3 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Regulatory nformation Safety I nformation WAB 3003 has been evaluated to and conforms to the product safety specifications Caution This product was qualified under test conditions that included the use of the power supplying equipment To ensure regulatory and safety compliance use only the provided power supplying equipment and install them properly To prevent electrical shock this device may require a grounding conductor in the line cord Connect the unit to a grounding type ac wall outlet using the power supplying equipment supplied with the unit To avoid the risk of electric shock and for a safety outdoor installation you may need other items such as Surge arrestors To avoid the risk of electric shock from lightening do not install or use this product during an electrical storm Operate and install this product as described in this manual This device must be installed and used in strict accordance with the manufacturer s instructions Do not open the device casing Do not perform any servicing other than that contained in the installation and troubleshooting instructions Refer all servicing to qualified service personnel FE FCC Certification A560 and A561 use the same circuitry and housing except the antenna type They both are evaluated and certif
9. AP Bridge 5 5 2 Event Log Event log provides the records of the system activities All the system events are shown here Home Logout Help gt 7 e System Wireless Firewall Utilities Status P ev e O M e WAB 3003 Wireless Outdoor CPE AP Repeater Y System Overview Event Log DHCP Lease UPAP Home Status gt Event Log Event Log Dec 31 16 00 49 syslogd started BusyBox v1 2 1 i Note As the Event Log is stored in RAM it will be refreshed after the system is restarted The system also supports a Syslog reporting function of reporting the events to an external Syslog server e Date Time The date and time of the record when the event happened e Hostname Indicate which Host records this event Note that all events in this page are local events and this field of all events is the same However in remote syslog service this field will help the network administrator identify which event is from this system For more information please refer to Section 5 1 4 Management Services e Process name with square brackets Indicate which process with the specific event is associated e Description Description of the event 108 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 5 3 DHCP Leases The table provides information about the leased LAN IP address with binding MAC address and expiration time System Overview Ewent Log 4 DHCP Lease UPnP Home St
10. Change Password Network Utilities Config Save amp Restore System Upgrade Reboot Y A Y Home Utilities gt Change Password Change Password Name root Old Password TILT New Password TTT ae a up to 32 characters Re enter New Password i Name admin New Password up to 32 characters Re enter New Password TILI 99 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 4 1 Change Password The administrator can update or change password The system provides two management accounts for CPE mode root and admin The root account is empowered with full privileges while the admin account is with partial For more information on the respective privileges of these two management accounts please refer to Appendix A System Management Privileges e root account management The root administrator is entitled to changing passwords for both the root and admin account Change Password Network Utilities Config Save amp Restore System Upgrade Reboot Home Utilities gt Chan ge Password Change Password Name root Old Password New Password up to 32 characters Re enter New Password LLI Name admin New Password up to 32 characters Re enter New Password TITT gt root account Enter the original password admin and a new password and then re enter the new password in the Re
11. Domain Name IP Address Authentication Port 1812 Secret Key Accounting Service Disable Enable Accounting Port 151 Accounting Interim Update Interval second s ME CLEAR gt WPA Settings o Cipher Suite Select an encryption method from TKIP WPA AES WPA TKIP WAP2 AES WAP2 or Mixed o Group Key Update Period The time interval for the Group Key to be renewed the time unit is in second gt Primary RADIUS Server Settings o Host Enter the IP address or domain name of the RADIUS server o Authentication Port The port number used by the RADIUS server Specify a port number or use the default 1812 o Secret Key The secret key for the system to communicate with the RADIUS server o Accounting Service Enable or disable the accounting service o Accounting Port The port number used by the RADIUS server Specify a port number or use the default 1813 o Accounting Interim Update Interval The time interval for the accounting to be updated the time unit is in second 42 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 5 Repeater Settings The system can serve as an Access Point a Repeater or an Access Point with Repeater depending on deployment needs Select a Repeater Type from the drop down list box and proceed with the related settings e None When None is selected the system is acting as an Access Point only therefore no further configuration is required here Hom
12. VAP Config Security Repeater Advanced Access Control Y Site Survey MAC ACL Disabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Utilities E status Advanced Settings Edit Edit Edit Edit Edit Edit Edit Edit e State The hyperlink showing Enable or Disable connects to the screen of VAP Configuration e Security Type The hyperlink showing security type connects to the screen of Security Settings e MAC ACL The hyperlink showing Allow or Disable connects to the screen of Access Control Settings e Advanced Settings The hyperlink of advanced settings connects to the screen of Advanced Wireless Settings 34 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 2 General Settings This section is for configuring the system RF settings Home Logout Help aE levelone was 3003 wireless Outdoor CPE AP Repeater s gt Y A E System Wireless Firewall Utilities Status WAP Overview General VAP Config Security Repeater Advanced Access Control Site Survey Home gt Wireless gt General General Settings Band 802 11b 802 11g Super G El Bursting El Fast Frames Dynamic Turbo Short Preamble Disable Enable Channel 1 Max Transmit Rate Auto Transmit Power Auto Beacon Interval 100 100 500ms e Band Select an appropriate wireless frequency band of this system Select one
13. Wireless Firewall Utilities Status clients Repeater Event Log Home gt Status gt System Overview Home Logout 7Help Overview System Overview _ amp System Radio Status System Name WAB 3003 MAC Address 00 1F D4 00 20 F1 Firmware Version 1 00 01 Band 802 11b g Build Number 1 12 1 2928 Channel 1 Location Greenwich TX Power Highest Site EN E Device Time 1999 12 31 16 01 07 System Up Time O days 0 01 07 Operating Mode AP LAN Interface 4 AP Status Profil i Security Onli MAC Address 00 1F D4 00 20 FO ee BSSID ESSID sind Chants IP Address 192 168 0 1 VAP 1 00 1F D4 00 20 F1 LevelOne None o Subnet Mask 255 255 255 0 Gateway 192 168 0 254 Figure 4 1 AP Mode Main Page 24 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 1 System This section provides information for configuring the following functions System Information Operating Mode Network Settings Management Services and QoS Classification fHome Logout 7 Help a level OnE was 3003 wireless Outdoor CPE AP Repeater _ n 7 y o e SEE Wireless Firewall Utilities Status A EA AO NN HN System Information k Operating Mode Network Y Management y Qos Classification Home gt System gt General System Information Name WAB 3003 Description Location Time De
14. each rule is designated with the following fields No The numbering will decide the priority to let system carry out the available firewall rules in the table State The check marks will enable the respective rules Action DROP denotes a block rule ACCEPT denotes a pass rule Name It shows the name of rule Ether Type It denotes the type of traffics subject to this rule Remark It shows the note of this rule Setting 4 actions are available Del denotes to delete the rule Ed denotes to edit the rule In denotes to insert a rule and Mv denotes to move the rule gt gt To delete a specific rule Del in Setting column of firewall list will lead to the following page for removal confirmation After SAVE button is clicked and system reboot the rule will be removed Firewall List Service Advanced Home gt Firewall Firewall List Layer 2 Firewall Settings Remove rule 1 54 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge gt gt To edit a specific rule Ed in Setting column of firewall list will lead to the following page for detail configuration From this page the rule can be edited form scratch or from an existing rule for revision fHome Logout 7Help a level OnE wae 3003 wireless Outdoor CPE AP Repeater e y o El System Wireless i AEREN i Utilities Status Firewall List Service j
15. s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e Universal Repeater The table will be displayed when Universal Repeater mode is selected For more information on the repeater type please refer to Section 4 2 5 Repeater Settings gt SSID SSID of the upper bound AP to be associated with gt Tx Rate The transmit rate of the Repeater gt SNR The SNR Signal to Noise Ratio indicates the relative signal strength between the upper bound AP and the system gt Tx Count The accumulative number of transmission counts gt Tx Error The accumulative number of transmission errors gt Encryption The encryption type used None WEP or WPA PSK Overview Y Cliente Repeater Ewent Log Home gt Status gt Repeater Information Repeater Information lt Universal Repeater SSID AF Status Enabled TX Rate 36 Mbits SNR 39 TX Count 14 Bytes TX Error 2 Packets Encryption None Fig 4 5 3 2 Universal Repeater 73 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 5 4 Event Log Event log provides the records of the system activities All the system events are shown here Overview Y Clients Repeater Event Log Home gt Status Event Log Event Log Dec 31 16 00 49 syslogd started BusyBox v1 2 1 Note As the Event Log is stored in RAM it will be refreshed after the system is restarted The system also supports a Syslog reporting function of reporting the events to an external Syslog
16. 255 255 255 0 Gateway 192 168 0 254 68 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 5 1 System Overview The System Overview page provides an overview of the system status for the administrator Home logout 7 Help P levelone was 3003 wireless Outdoor CPE AP Repeater gt 4 y o e System Wireless Firewall y Utilities TEWE A Overview Home gt Status gt System Overview System Overview 9 System _________ 8 Radio Status System Name WAB 3003 MAC Address 00 1F D4 00 20 F1 Firmware Version 1 00 01 Band 802 11b g Build Number 1 12 1 2928 Channel 1 Location Greenwich TX Power Highest Site EN E Device Time 1999 12 31 16 02 00 System Up Time 0 days 0 02 00 Operating Mode AP 8 LAN Interface 4 AP Status ESE Profile Security Online MAC Address 00 1F D4 00 20 F0 Name BSSID ESSID Type Clients IP Address 192 168 0 1 WAP 1 00 1F D4 00 20 F1 LevelOne None O Subnet Mask 255 255 255 0 Gateway 192 168 0 254 The description of the table is shown below 69 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge ITEM DESCRIPTION System Name The name provided in System Information Firmware Version The present firmware version of the system Build Number The Build Number of the firmware Location The location provided in System Information System Site The firmware version for specific region Device Time The curre
17. Advanced Home gt Firewall List gt Rule Config Layer 2 Firewall Configuration Rule ID 1 Rule name CDP and VTP gt EtherType IEEE802 3 Interface Y From To API y DSAP SSAP aa Type 2000 ie IPv4 0800 Source MAC Address Mask Destination mac address 01 00 0C CC CC CC Mask Action Y Block Pass Remark SAVE CLEAR 55 4 4 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Rule ID The numbering of this specific rule will decide its priority among available firewall rules in the table Rule name The rule name can be specified here Ether Type The drop down list will provide the available types of traffics ALL 1Pv4 EEE802 3 802 1Q ARP and RARP subject to this rule Interface It can indicate inbound outbound direction with desired interfaces VAP1 VAP8 Service when Ether Type is IPv4 Select the available upper layer protocols services from the drop down list DSAP SSAP when Ether Type is 1EEE802 3 The value can be further specified for the fields in 802 2 LLC frame header Type when Ether Type is 1EEE802 3 The field can be used to indicate the type of encapsulated traffics Vian ID when Ether Type is 802 1Q The Vlan ID is provided to associate with certain VLAN tagging traffics Priority when Ether Type is 802 1Q It denotes the priority level with associated VLAN traffics Encapsulated Type when
18. E evel O nN e WAB 3003 Wireless Outdoor CPE AP Repeater gt 4 y os e System Wireless Firewall Utilities Status Change Password Y Network Utilities Y Config Save A Restore System Upgrade Reboot i A 4 Home gt Utilities gt Reboot Now rebooting the System Reboot may take several minutes to complete The home page will be shown after system boots up If the web page does not go back for a long time please click the following link WAB 3003 The System Overview page will appear upon the completion of reboot 67 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 5 Status This section displays the status of System Overview Clients Repeater and Event Log Home logout 7 Help mE evel OME was 3003 Wireless Outdoor CPE AP Repeater gt 4 y gt _ system Wireless Firewall _uulities Overview Home gt Status gt System Overview System Overview 9 System ________ 8 Radio Status System Name WWAB 3003 MAC Address 00 1F D4 00 20 F1 Firmware Version 1 00 01 Band 802 11b g Build Number 1 12 1 2928 Channel 1 Location Greenwich TX Power Highest Site EN E Device Time 1999 12 31 16 02 00 System Up Time 0 days 0 02 00 Operating Mode AP 9 LAN Interface ________ AP Status A Profile Security Online MAC Address 00 1F D4 00 20 FO Name BSSID ESSID Type Clients IP Address 192 168 0 1 VAP 1 00 1F D4 00 20 F1 LevelOne None 0 Subnet Mask
19. EVOCA oia 108 5 5 3 AAA RT er rE SC RT eae A Pe ee ed 109 5 5 4 PPP e o maaetdaandguscemuacaesaetengenacssaa 110 5 6 UN eS oen RC ORD CO ee E PUD Tee Coe Ce 111 Appendix A System Management Account Privileges occccccnccccconocccoconncoceccanoncrcnanancrnannnncrnannnnnrnannaneno 112 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 1 Introduction 1 1 Overview This manual is intended for system integrators field engineers and network administrators to set up WAB 3003 108M Outdoor PoE AP CPE Bridge in their network environments It contains step by step procedures and graphic examples to guide users with networking knowledge to complete the installation WAB 3003 with N type antenna The 802 11 b g compliant WAB 3003 is a multi mode Last Mile Broadband solution for Wireless Internet Service Provider WISP It can be used as an outdoor Customer Premises Equipment CPE mode to receive wireless signal over the last mile helping WISPs deliver wireless broadband Internet service to new residential and business customers where wired broadband Internet service such as cable and DSL cannot serve In addition it can be deployed as a traditional fixed wireless Access Point AP mode either indoors or outdoors The WAB 3003 is compact in size and weatherproof Coming with a mounting kit it can be mounted on a pole or wall Specifically developed for outdoor use the fully hardened P68 rated WAB 3003 can withs
20. EtherType is 802 1Q It can be used to indicate the type of encapsulated traffics Opcode when EtherType is ARP RARP This list can be used to specify the ARP Opcode in ARP header Source MAC Address Mask indicates the source MAC IP Address Mask indicates the source IP address when EtherType is Pv4 ARP P MAC MASK indicate the ARP payload fields Destination MAC Address Mask indicates the destination MAC IP Address Mask indicates the destination IP address when EtherType is IPv4 ARP P MAC MASK indicate the ARP payload fields Action The rule can be chosen to be Block or Pass Remark The note of this rule can be specified here When the configuration for firewall rules is provided please click SAVE and reboot system to let the firewall rules take effect 56 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge gt gt To insert a specific rule In in Setting column of firewall list will lead to the following page for detail configuration with rule ID for the current inserted rule From this page the rule can be edited form scratch or from an existing rule for revision Home OLogout Help ln E evel ONE was 3003 Wireless Outdoor CPE AP Repeater gt 4 y Z Wireless ANETE Utilities a sae Firewall List Service y Advanced System Status Home Firewall List gt Rule Config Layer 2 Firewall Configuration Rule ID 1 Rule name
21. Ge Iov http 1192 168 0 1 File Edit View Favorites Tools Help w hi E waB 3003 Caution Using an incorrect default IP address will result in no Login page shown on the web browser Please make sure a correct IP address is used for the desired mode refer to Section 3 2 1 Instruction to Web Management Interface for detailed default IP addresses Step 3 System Login The system manager Login Page will then appear Enter root in the User name field and admin in the Password field and then click OK to log in F levelone Username Password oa y Y User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 4 Login Success The System Overview page will appear after a successful login To logout simply click on the Logout button on the top right hand corner of the management interface fi Home Logout 7Help a levelone was 3003 wireless Outdoor AP g gt 4 y o e System Wireless Firewall Utilities SEWE A iy nan 7 y J Overview Clients j Event Log A 4 i i Home gt Status gt System Overview System Overview YY System Radio Status System Name WAB 3003 MAC Address 00 1F D4 00 20 F1 Firmware Version 1 00 00 Band 802 11b g Build Number 1 10 1 2617 Channel 1 Location Greenwich TX Power Highest Site EN E Device Time 1999 12 31 16 03 30 System Up Time 0 days 0 03 30 4 AP Status Operating Mode AP sich BSSID ESSID Esad rada VAP 1 00 1F D
22. Survey Scan Result Scan Again SSID MAC Address Channel Rate Signal Security Setup Connect Accton_AP 00 22 20 90 4 86 1 54 37 WPA2 PSK Setup WAP 0003 00 11 6B 60 64 05 6 a4 29 WEP WBR 6002 00 CO0 02 PF C7 BE 11 a4 10 None Connect The scan result displayed here is an example only gt Click on the Wireless button and then select the Site Survey tab gt The system will automatically scan and display all available APs in the same WAB 3003 s coverage area gt Click Scan Again if the APs to be associated with are not listed on the Scan Result list Step 4 Select AP to be Associated Select an AP to be associated with from the Scan Result list provided in Step 3 20 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 5 Security Settings Home Logout 7Help sf evel O MN e WAB 3003 Wireless Outdoor CPE AP Repeater eS gt y E System Wireless Firewall Utilities Status f N A pane Advanced Security Site Survey a r Home gt Wireless gt Site Survey Scan Result Scan Again 55ID MAC Address Channel Rate Signal Security Setup Connect Accton_AP 00 22 2D 90 74 86 1 54 57 WPA2 PSK WAP 0003 00 11 6B 60 64 C5 6 54 29 WEP WBR 6002 00 C0 02 FF C7 8E 11 54 10 None Pre shared Cipher TKIP Pre shared Key Type PSK Hex 64 chars Passphrase 8 63 chars Pre shared Key Connect gt The above figur
23. User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 3 Firewall The system provides an added security feature L2 firewall in addition to typical AP security Layer 2 firewall offers a firewall function that is tailored specifically for layer 2 traffics providing another choice of shield against possible security threats coming from going to WLAN AP interfaces hence besides firewall policies configured on gateways this extra security feature will assist to mitigate possible security breach 4 3 1 Layer 2 Firewall Settings It provides an overview of firewall rules in the system 6 default rules with up to total 20 firewall rules are available for configuration Home Logout 7 Help mE eve O N WAB 3003 Wireless Outdoor CPE AP Repeater gt 4 Q o E system Wireless AMATENI Utilities Status Firewall List fa Advanced Home gt Firewall gt Firewall List Layer 2 Firewall Settings Enable Layer 2 Firewall Disable Enable No State Action Name EtherType Remark Setting 1 El DROP CDP and VTP IEEE 8023 Del Ed In Mv 2 El DROP STP IEEE 8023 Del Ed In Mv 3 Fl DROP GARP IEEE 8023 Del Ed In Mv 4 El DROP RIP IPv4 Del Ed In My 5 E DROP HSRP IPy4 Del Ed In Mv 6 Fl DROP OSPF Pv4 Del Ed In Mv 7 Del Ed In Mv Del Ed In Mv g Del Ed In Mv 10 Del Ed In Mv First Prey Next Last total 20 53 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge From the overview table
24. WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 8 Site Survey The system can scan and display all surrounding available access points APs when Universal Repeater is enabled Site Survey is a useful tool to provide information about the surrounding wireless environment available APs are shown with their respective SSID MAC Address Channel Rate setting Signal reading and Security type The administrator can click Setup or Connect to configure the wireless connection for Universal Repeater according to the mentioned readings na ilevelone was 3003 wireless Outdoor CPE AP Repeater System Mills Firewall Utilities Status ftHome Logout Help T 7 a y T i i a 4 Ff i VAP Overview General VAP Config y Security Repeater Y Advanced j Access Control 4 Site Survey Home gt Wireless gt Site Survey Scan Result Figure 4 2 8 1 Site Survey when repeater function is disabled Scan Result Scan Again SSID MAC Address Channel Rate Signal Security Setup Connect Accton_AP 00 22 2D 90 74 86 1 54 57 WPA2 PSK WAP 0003 00 11 6B 60 6A C5 6 54 29 WEP Setup WBR 6002 00 C0 02 FF C7 8E 11 54 10 None Figure 4 2 8 2 Site Survey when repeater function is enabled example only e SSID The SSID Service Set ID of the AP found in the system s coverage area e MAC Address The MAC address of the respective AP e Channel The channel number currently used by the respective AP or repeater e Rate The
25. enter New Password field Click SAVE to activate the new password gt admin account Enter a new password and then re enter it in the Re enter New Password field The root administrator is acting as a superintendent here thus entering the old password is not required Click SAVE to activate the new password 100 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 4 2 Network Utilities The administrator can check the WAN and LAN connectivity via this function The current provided network utility is Ping and the target host FQDN compliant name or IP address can be provided to test network connection Change Password y Network Utilities Config Save amp Restore Y System Upgrade Y Reboot Home gt Utilities gt Network Utilities Network Utilities pm e Ping Host Domain IP Enter the domain name or IP address of a target device for diagnosis purpose for example www google com and click PING to proceed The ping result will be shown in the Result field Change password Network Utilities Config Save amp Restore Y System Upgrade Y Reboot Home gt Utilities gt Network Utilities Network Utilities PING www l google com 66 249 89 147 56 data bytes 101 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 4 3 Configuration Save amp Restore This function is used to backup or restore the current settings The system can be restored to the default setti
26. ft Home Logout Help mE levelone wae 3003 wireless Outdoor CPE AP Repeater gt 4 y A system Wireless ee Ple y TEE Firewall IA s f ai EEE y System Overview Y Event Log DHCP Lease UPAP Home Status gt System Overview System Overview gP System Radio Status System Name WAB 3003 Status Connected Firmware Version 1 00 01 SSID WBR 6002 Build Number 1 12 1 2928 MAC Address 00 CO 02 FF C7 8E Location Greenwich Channel 11 Site EN E Signal Strength 8 Device Time 1999 12 31 16 00 55 Security None System Up Time O days 0 00 55 Operating Mode CPE 0 LAN Interface a WAN Interface MAC Address 00 1F D4 00 20 F0 Mode Static IP Address 192 168 0 1 MAC Address 00 1F D4 00 20 F1 Subnet Mask 255 255 255 0 IP Address 192 168 10 1 DHCP Server Enabled Subnet Mask 255 255 255 0 Gateway 192 168 10 254 Bandwidth Down Unlimited UP Unlimited 12 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 3 2 2 Quick Configuration WAB 3003 is a dual mode system which can be configured as either an access point AP Mode or a gateway CPE Mode based on deployment needs This section provides a step by step configuration procedure for installing CPE mode and AP mode respectively lt AP Mode Default Mode gt Step 1 Mode Confirmation fiHome Logout 7Help P levelone vasso wireless Outdoor CPE AP Repeater g gt y o 2 System Wireless Firewall utili
27. further information fi Home 9 Logout 7 Help P a leve OME was 3003 Wireless Outdoor CPE AP Repeater gt 4 A gt B System Wireless Firewall Utilities Status Online Help CPE Mode Organization of the Configuration Web System Information IP Port Forwarding oystem Overview Operating Mode Network Utilities Event Log 111 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Appendix A System Management Account Privileges The system provides two system management accounts for CPE mode root and admin The root account is empowered with full privileges while the admin account is with partial The management privileges of the admin account are shown in the following table Main Menu Sub monu orou aamin Privilege stesuvey SiR ipfpor Forwarding O eaw dl ETS E te Network lites O fea we System Upgrade a CT A te 112
28. gt system Upgrade System Upgrade Current Version 1 00 01 Current Build Number 1 12 1 2928 File Name Upload Note e To prevent data loss during firmware upgrade please back up the current settings before proceeding further e Please restart the system after the upgrade Do not interrupt the system i e power on off during the upgrade or restart process since it may cause damage to the system 66 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 4 5 Reboot The administrator can reboot the device remotely Click Reboot to restart the system immediately Home Logout 7 Help as E levelone wae 3003 wireless Outdoor CPE AP Repeater gt o gt 4 gt amp System Wireless Firewall Utilities Status ir To i 7 i k Change Password 1 Network Utilities 1 Config Sawe amp Restore y System Upgrade 1 Reboot Home gt Utilities Reboot Reboot the System Reboot may take several minutes to complete The Admin Login Page will be shown after system boots up Reboot A pop up screen will appear to confirm the request to restart the system Click OK to proceed or click Cancel to cancel the restart request Windows Internet Explorer E Do you want to reboot the system A warning message as displayed below will appear during the reboot period The system power must be turned on before the completion of the reboot process fHome OLogout 7 Help ls
29. in its CPE mode System IP Port Change System FUNCTION Operating pote Demilitarized Network Mode Ap Utilities eu eros Settings Configuration DHCP Lease Restore Management Site Survey UPnP Status Services Upgrade ee reboot Network Security Settings Settings Table 5 1 CPE Mode Functions 76 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Home OLogout FHelp ln E level on e WAB 3003 Wireless Outdoor CPE AP Repeater g gt Sd y gt System Wireless Firewall Utilities 3 AM WAI AA Lik System Overview Event Log Y DHCP Lease UPnP Home gt Status gt System Overview System Overview amp System ______ Radio Status System Name WAB 3003 Status Connected Firmware Version 1 00 01 SSID Bzeek Free WiFi Build Number 1 12 1 2928 MAC Address 00 1C BF 25 F4 B8 Location Greenwich Channel 7 Site EN E Signal Strength 48 Device Time 1999 12 31 16 00 55 Security None fa Q LAN Interface mmm 9 WAN Interface MAC Address 00 1F D4 00 20 F0 Mode Static IP Address 192 168 0 1 MAC Address 00 1F D4 00 20 F1 Subnet Mask 255 255 255 0 IP Address 192 168 10 1 DHCP Server Enabled Subnet Mask 255 255 255 0 Gateway 192 168 10 254 Bandwidth Down Unlimited UP Unlimited Figure 5 1 CPE Mode Main Page 71 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 1 System This section provides information in configuring the following functions System Information
30. provider 83 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e LAN Configuration Configure LAN and DHCP settings on this page IP Address and Netmask are required fields to set up LAN interface IP Address The IP address of the LAN port Netmask The Subnet mask of the LAN port gt gt gt DHCP Server If enabled devices connected to this system can obtain an IP address automatically O O Enable Disable Select Enable to activate this function or Disable to inactivate it Start IP End IP Specify the range of IP addresses to be distributed by the DHCP server to clients Preferred DNS Server Enter the IP address of a preferred DNS server this field is required Alternate DNS Server Enter the IP address of a secondary DNS server this is optional WINS Server IP Enter the IP address of a WINS Windows Internet Name Service server this is optional Domain Name Enter the domain name for this network Lease Time It can be chosen from the drop down list to renew Leased LAN IP 84 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 1 4 Management Services The system supports SNMP Syslog UPnP and Auto Reboot functions for easy management These functions can be configured on this page ft Home Logout Help mE levelone wae 3003 wiretess Outdoor CPE AP Repeater y o e system Wireless Firewall Utilities Status A oN fi a i System Inform
31. server e Date Time The date and time when the event happened e Hostname Indicate which Host records this event Note that all events in this page are local events and this field of all events is the same However in remote Syslog service this field will help the network administrator identify which event is from this system For more information please refer to Section 4 1 4 Management Services e Process name with square brackets Indicate which process with the specific event is associated e Description Description of the event 74 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 6 Online Help The Help button is at the upper right hand corner of the display screen Click Help for the Online Help window and then click the hyperlink of the desired topic for further information Online Help AP Mode Organization of the Configuration Web suse vieless rewan Units stats oystem Information Password oystem Overview Management Services a i Event Log M er rs Ps YAA Feces o siesiney si 75 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 CPE Mode Configuration When CPE mode is activated the system acts as a gateway where it connects to the WAN wirelessly and provides Ethernet connection to users via wired LAN This chapter will guide you through setting up the CPE mode with graphical illustrations The following table shows all the functions of WAB 3003
32. transmitting rate of the respective AP e Signal The signal strength of the respective AP e Security The encryption type used by the respective AP 51 Setup Connect User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge gt Connect Click Connect to associate with the respective AP directly no further configuration is required AP 00 1F D4 39 10 74 11 54 54 None Connected gt Setup Click Setup to configure security settings for associating with the respective AP o WEP Click Setup to configure the WEP setting for associating with the target AP WAP 0003 00 11 6B 60 6A C5 6 54 40 WEP The following configuration box will then appear at the bottom of the screen For more information on the WEP security settings please refer to Section 4 2 4 Security Settings WEP Key Type Y Open Shared WEP Key Length Y 64 bits 128 bits 152 bits WEP Key Format Y ASCII Hex WEP Key Index 1 WEP Keys i 3 A Connect o WPA PSK Click Setup to configure the WPA PSK setting for associating with the target AP Accton_AP 00 22 2D 90 74 86 1 a4 39 WPA2 PSK setup The following configuration box will then appear at the bottom of the screen For more information on the WPA PSK security settings please refer to Section 4 2 4 Security Settings Pre shared Cipher TKIP Pre shared Key Type a PSK Hex 64 chars Passphrase 8 63 chars Pre shared Key 52
33. 3003 Wireless Outdoor CPE AP Repeater r a system Wireless Firewall is Status OS gt AA AAA ISA AA an Change Pas word l Network Utilities Config Save amp Restore y System Upgrade Reboot Y i A 4 y Home gt Utilities gt Change Password Change Password Name root Old Password ILLI New Password TILLI up to 32 characters Re enter New Password sae cea gt root account Enter the original password admin and a new password and then re enter the new password in the Re enter New Password field Click SAVE to save the new password 63 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 4 2 Network Utilities The administrator can check the network connectivity via this function The current provided network utility is Ping and the target host FQDN compliant name or IP address can be provided to test network connection T Change Password Network Utilities Save amp Restore N System Upgrade fi Reboot k Home Utilities gt Network Utilities Network Utilities Ping Host Domain IP ii e Ping Host Domain IP Enter the domain name or IP address of a target device for diagnosis purpose for example www google com and click Ping to proceed The ping result will be shown in the Result field fiHome Logout 7 Help is E evel O N e WAB 3003 Wireless Ou
34. 4 00 20 F1 LevelOne Mone 0 a LAN Interface MAC Address 00 1F D4 00 20 FO IP Address 192 168 0 1 Subnet Mask 255 255 255 0 Gateway 192 168 0 254 Note By default AP mode is enabled Therefore the administrator must login to the system via the AP mode login page at the first time The administrator is then able to switch between modes afterwards For information on switching between modes please refer to Section 4 1 2 Operating Mode 10 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge lt CPE Mode gt Step 1 Launch Web Browser Launch a web browser to access the web management interface of CPE mode by entering the default IP address http 192 168 0 1 in the URL field and then press Enter WAB 3003 Windows Internet Explorer hy E http 1192 168 0 1 File Edit View Favorites Tools Help ve hi Ewag a00 Step 2 System Login The system manager Login Page will then appear Enter root in the User name field and admin in the Password field and then click OK to log in Below depicts an example of using the root manager account levelone Username root Password 11 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 3 Login Success After a successful login into WAB 3003 a System Overview page of web management interface will appear To logout simply click on the Logout button at the upper right hand corner of the interface
35. 7Help a level OnE was 3003 wireless Outdoor CPE AP Repeater 1 y o E System Wireless Firewall Utilities Status i y E O EA System Information Operating Mode Y Network A Management oos Classification Home gt System gt Management Services Management Services VLAN for Management a Disable E Enable VLAN ID 1 4094 SNMP Configuration Disable Enable Community String Read Write Trap Disable Enable Server IP System Log Disable Enable SYSLOG Server IP 192 168 1 254 he ka Ls Li T server Port 514 SYSLOG Level Error E Auto Reboot Disable Enable Reboot Time 03 00 30 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge VLAN for Management The Ethernet traffic from the system can be tagged with VLAN tag with specific 1D SNMP Configuration By enabling SNMP service the remote SNMP manager could obtain the system status gt Enable Disable Select Enable to activate this function or Disable to inactivate it gt Community String The community string is required when accessing the Management Information Base MIB of the system o Read Enter the community string to access the MIB with Read privilege o Write Enter the community string to access the MIB with Write privilege gt Trap When enabled events on Cold Start Interface UP amp Down and Assoc
36. AP Config Security Repeater Advanced Access Control Site Survey Home gt Wireless gt Repeater Config Repeater Settings Repeater Type The SSID of Upper Bound AP A Current wireless channel of the system is set at 1 Repeater connection may fail if the system is set to connect to upper AP with different channels Security Type gt The SSID of Upper Bound AP Specify the SSID of the upper bound AP that the system is used to extend that AP s wireless service coverage gt Security Type Select the security type used by the upper bound AP None WEP or WPA PSK Security settings configured here must be the same as the upper bound AP 45 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 6 Advanced Wireless Settings The advanced wireless settings for the system s VAP profiles allow customization of data transmission settings The administrator can tune the following parameters to improve network communication performance if a poor connection occurs ftHome Logout Help E leve OME was 3003 Wireless Outdoor CPE AP Repeater System Mis Firewall Utilities Status VAP Overview General VAP Config Security Repeater a eee Control Site Survey Home gt Wireless gt Advanced Advanced Wireless Settings Profile Name VAP 1 RTS Threshold 2346 1 2346 Fragment Threshold 2346 256 2346 Broadcast SSID Disable Enable Wir
37. Del Ed In Mv 2 E DROP STP IEEE 8023 Del Ed In Mv 3 El DROP GARP JEEE 8023 Del Ed In Mv 4 E DROP RIP IPy4 Del Ed In Mv 5 ial DROP HSRP IPv4 Del Ed In My 6 E DROP OSPF IPy4 Del Ed In Mv 7 C Del Ed In Mv 8 ES Del Ed In My g ail Del Ed In Mv 10 E Del Ed In Mv First Prev Next Last total 20 SAVE J CLEAR Layer 2 Firewall Settings Check State 59 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 3 2 Firewall Service The administrator can add or delete firewall services here the services in this list will become options to choose in firewall rule when Ether Type is IPv4 Home OLogout FHelp E evel ONE was 3003 Wireless Outdoor CPE AP Repeater eS 4 B As Z System Wireless AE Utilities Status A F A AN Firewall List Service Advanced A Home gt Firewall gt Service Config Firewall Service No Name Description Delete 1 ALL ALL 2 ALL TCP TCP Source Port 0 65535 Destination Port 0 65535 3 ALL UDP UDP Source Port 0 65535 Destination Port 0 65535 4 ALL ICMP ICMP 5 FTP TCP UDP Destination Port 20 21 6 HTTP TCP UDP Destination Port 80 7 HTTPS TCP UDP Destination Port 443 8 POP3 TCP Destination Port 110 9 SMTP TCP Destination Port 25 10 DHCP UDP Destination Port 67 58 First Prev Next Last total 28 Overview of Firewall Services There are 28 firewall services available in default settings these default services cannot be deleted but c
38. HCP or Static o Static The administrator can manually set up the static WAN IP address IP Address The IP address of the WAN port Netmask The subnet mask of the WAN port Gateway The gateway IP address of the WAN port Primary DNS Server The IP address of the primary DNS Domain Name System server Secondary DNS Server The IP address of the substitute DNS server o DHCP This connection type is applicable when the system is connected to a network with the presence of a DHCP server all related IP information required will be provided by the DHCP server automatically gt Bandwidth Limit o Download The maximum download bandwidth of WAN interface to be shared by clients o Upload The maximum upload bandwidth of the WAN interface to be shared by clients e Dynamic DNS The option can be enabled to bind FQDN compliant Host Name with this device If enabled the service Provider must be chosen from the drop down list with provided Host Name User Name User Email and Password gt DDNS Select Enable to activate this function or Disable to inactivate it gt Provider The name of the DDNS provider that the system is registered with Select a DDNS provider from the drop down list box gt Host Name The FQDN registered with the selected DDNS provider gt User name E mail The account ID user name or e mail registered with the DDNS provider gt Password Key The password of the account registered with the DDNS
39. P Bridge The description of the table is shown below ITEM DESCRIPTION System Name The name provided in System Information ICE The present firmware version of the system Version Build Number The Build Number of the firmware Location The location provided in System Information System Site The firmware version for specific region Device Time The current time on the device System Up Time The system elapsing time since last reboot Operating Mode Either CPE or AP LAN Interface MAC Address The MAC address of LAN Interface IP Address The IP address of the LAN Interface Subnet Mask The Subnet Mask of the LAN Interface DHCP Server DHCP server status Radio Status WAN Status Status The RF status SSID The SSID of the associated AP MAC Address The MAC address of the associated AP Channel The operating channel Signal Strength The signal strength reading of the wireless connection Security The security type used for wireless connection Mode The method to obtain IP for the WAN interface MAC Address The MAC address of the WAN RF Interface IP Address The IP address of the WAN interface Subnet Mask The Subnet Mask of the WAN interface Gateway The gateway IP address Bandwidth The bandwidth setting of the WAN interface 107 User s Manual WAB 3003 108M 11g Outdoor PoE CPE
40. Password TILI E gt Click on the Utilities button and then select the Password tab gt Enter a new password in the New Password field and retype it in the Re enter New Password field Click SAVE to save the changes 14 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 3 Network Settings ftiHome Logout 7 Help P evel O a e WAB 3003 Wireless Outdoor CPE AP Repeater y A a Svstem Wireless Firewall Utilities Status System Information Operating Mode Network Management QoS Classification Home gt System gt Network Interface Network Settings Mode 0 Static DHCP Renew IP Address 192 168 0 1 id Netmask 255 255 255 0 il Default Gateway 192 168 0 254 Primary DNS Server 168 95 1 1 Alternate DNS Server Layer STP Y Disable Enable Settings here are for example only gt gt Enable Static and then enter the related information in the fields marked with red asterisks gt Click SAVE to save the settings Click on the System button and then select the Network tab 15 Step 4 SSID Settings User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge f Home OLogout 7 Help Ba E evel OME was 3003 Wireless Outdoor CPE AP Repeater gt System Wickss status gt Utilities y Firewall A A a g A
41. RP spoofing Trust List Broadcast can be enabled to let other WAB 3003 with L2 firewall feature learn the trusted MAC IP pairs to issue ARP requests Static Trust List can be used to add MAC or MAC IP pairs to issue ARP request Other network nodes can still send their ARP requests however if their IP appears in the static list with different MAC their ARP requests will be dropped to prevent eavesdropping If any settings are made please click SAVE to save the configuration before leaving this page 61 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 4 Utilities The administrator can maintain the system on this page Change Password Network Utilities Configuration Save amp Restore System Upgrade and Reboot Home Logout 7 Help PE evel a e WAB 3003 Wireless Outdoor CPE AP Repeater System Wireless Firewall Utilities Status lead Password Y Network Utilities Config Save A Restore A System Upgrade Eee A Y i Y y Home gt Utilities gt Change Password Change Password Name root Old Password New Password up to 32 characters Re enter New Password 62 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 4 1 Change Password The administrator can update or change password The system provides one management account for AP mode root account The administrator can change password on this page fHome Logout 7 Help F l evel O a WAB
42. Repeater gt y A PAA Wireless Utilities Firewall System Information Operating Mode Network Y Management Y Qos Classification A Home gt System gt QoS Classification QoS Classification Status Enable Disable The system supports function of QoS classification where specified VLAN ID can be assigned to a specific QoS access category for priority handling of traffics Enable QoS System Information Operating Mode Network Management QoS Classification A Home gt System gt QoS Classification QoS Classification No VLAN ID QoS Access Category Remark Best Effort Y Po Best Effort Pe Best Effort Y Po Best Effort Po Best Effort d Loo OSOS Best Effort M Doo y O Best Effort IA Best Effort Y Po Best Effort Pe JUUUUUUL 32 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 Wireless The administrator can configure the following wireless settings on this page VAP Overview General Settings VAP Configuration Security Settings Repeater Settings Advanced Wireless Settings Access Control Settings and Site Survey The system supports up to eight Virtual Access Points VAPs Each VAP can have its own settings including ESSID VLAN ID security settings etc Such VAP capability enables different levels of service to meet actual requirements Home OLogout Help PE leve ONM was 3003 Wireless Outdoor CPE AP Repeate
43. WEP Key Length Select from 64 bit 128 bit or 152 bit key length WEP Key Format Select from ASCII or Hex format for the WEP key Y VV WV WEP Key Index Select a key index from 1 through 4 The WEP key index is a number that specifies which WEP key to use for the encryption of wireless frames during data transmission gt WEP Keys Provide WEP key value the system supports up to 4 sets of WEP keys 39 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 8 802 1X Provide RADIUS authentication and enhanced WEP level OnE waz 3003 wireless Outdoor CPE AP Repeater g gt System b A N VAP Overview General VAP Config r Wireless Home gt Wireless gt Security Security Type Dynamic WEP Primary RADIUS Server Secondary RADIUS Server gt Dynamic WEP Settings o gt gt Firewall Utilities y MA Security espesor advanced _ Access Control Site Survey 4 Security Settings Profile Name vap 1 802 1x Disable Enable WEP Key Length 64 bits 128 bits Rekeying Period 300 second s Host i Domain Name IP Address Authentication Port 1812 Secret Key Accounting Service Disable Enable Accounting Port 1813 y Accounting Interim Update Interval 60 second s Host i Domain Name IP Address Authentication Port 18 12 Secret Key Accounting Service Disable Enable
44. a WMM is a Quality of Service QoS feature that prioritizes wireless data packets based on four access categories voice video best effort and background Applications without WMM and applications that do not require QoS are assigned to the best effort category which receives a lower priority than voice and video In short WMM decides which data streams are the most important and assign them a higher traffic priority lt To receive the benefits of WMM QoS gt The application must support WMM You must enable WMM in this system You must enable WMM in the wireless adapter in your computer I APP APP Inter Access Point Protocol is a protocol by which access points share information about the stations that are connected to them By enabling this function the system will automatically broadcast information of associated wireless stations to its peer access points This will help wireless stations roam smoothly among IAPP enabled access points in the same wireless LAN 802 11g Protection When enabled the associated 802 11g stations will benefit from this function since their transmission speed will not be affected by the surrounding 802 11b stations 4 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 7 Access Control Settings The administrator can restrict the wireless access of client devices based on their MAC addresses fiHome Logout 7 Help PE eve O M e WAB 3003 Wireless Outdoor CPE AP Repeat
45. an be disabled If changes are made please click SAVE to save the settings before leaving this page 60 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 3 3 Advanced Firewall Settings Advanced firewall settings are used to supplement the firewall rules providing extra security enhancement against DHCP and ARP traffics traversing the available interfaces of system fi Home Logout 7Help a fe E ev E ONE was 3003 Wireless Outdoor CPE AP Repeater g gt 1 y os E System Wireless AATE Utilities Status Firewall List Service A Advanced Home gt Firewall gt Advanced Advanced Firewall Settings Trust Interface F F F F F Fi El E E VAP 1 VAP2 VAP 3 VAP4 VAP 3 VAPG VAP VAPS Ei 7 W E El E Ei 7 WDS1 WDS2 WDS3 WDS4 WDS5 WDS6 WDS7 WDS8 Ed NONE i Disable Enable ARP Inspection Disable Enable Trust List Broadcast Disable Enable Static Trust List Disable Enable Trust Interface Each interface can be checked individually to mark as trusted interfaces security enforcements on DHCP ARP like DHCP snooping and ARP inspection will be carried out on non trusted interfaces DHCP Snooping When enabled DHCP packets will be validated against possible threats like DHCP starvation attack in addition the trusted DHCP server IP MAC can be specified to prevent rogue DHCP server ARP Inspection When enabled ARP packets will be validated against A
46. an manually set the system date and time Device Time Time Zone Time Set Date Set Time Time 1999 12 31 16 11 05 GMT 08 00 Pacific Time US amp Canada Tijuana Enable NTP Manually set up aan I Year Month Day ai Hour e Min misec Set Date Select the appropriate Year Month and Day from the drop down list box Set Time Select the appropriate Hour Min and Sec from the drop down list box 217 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 1 2 Operating Mode WAB 3003 supports two operation modes CPE mode and AP mode The administrator can set the desired mode on this page and then configure the system according to deployment needs Home OLogout Help PE evel O nN E WAB 3003 Wireless Outdoor CPE AP Repeater gt 4 y E System Wireless Firewall Utilities Status A ee A System Information Y Operating Mode Y Network Y Management QoS Classification b Home gt System gt Operating Mode Operating Mode e Operating Mode Select the desired mode and then click SAVE to save the setting Note After clicking SAVE the system will immediately ask for a reboot to activate the selected mode 28 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 1 3 Network Settings LAN settings can be configured on this page fi Home Logout 7 Help ln E eve O a WAB 3003 Wireless Outdoor CPE AP Repe
47. art of the network can be exposed to the Internet in a limited and controlled way for special purpose Internet services such as on line game or video conferencing on this page Please ensure that the internal port to be used is not occupied by other applications gt System gt Wireless TENEN IP Port Forwarding DMZ A Home gt Firewall gt 1P Port Forwarding IP Port Forwarding Service Name External Port Range Internal 1P Address rm IP Port Forwarding External Port Range Service Item Name Internal IP Address Protocol State i 5 ev O FA e WAB 3003 Wireless Outdoor CPE AP Repeater fi Home Logout Help gt 3 Utilities Status Protocol TCP UDP y Add Delete Edit Service Name The administrator can provide an easy remembered alias for the specific forwarding External Port Range The external port for forwarding traffic can be selected from the drop down list or specified by choosing User Define to set the range manually Internal I P Address Enter the LAN IP address to receive the forwarding traffic Protocol Forwarding traffic protocol can be selected from drop down list to be TCP UCP TCP or UDP Add Click Add to activate the new service IP Port Forwarding Details of current services available Click Delete to remove the specified service Click Edit to configure the current setting IP Port Forwarding ss Service External Port Item Name Ra
48. ater N ae y o E SAG Wireless Firewall Utilities Status i 7 i i i System Information Operating Mode Network Management QoS Classification Home gt System gt Network Interface Network Settings Mode Static DHCP IP Address 192 168 0 1 i Netmask 255 255 255 0 Default Gateway 192 168 0 254 Primary DNS Server 168 95 1 1 e Alternate DNS Server layer STP Disable Enable Mode Determine the way to obtain the IP address by DHCP or Static manually set gt Static Static setting is set these parameters manually The basic parameters need to provide such as IP address subnet mask and Gateway o IP Address The IP address of the LAN port o Netmask The Subnet mask of the LAN port o Gateway The Gateway IP address of the LAN port o Primary Secondary DNS Server Please provide at least on DNS server s IP address gt DHCP The option is provided when a DHCP server is provided in the network The following IP address Netmask Gateway setting will be disabled Layer 2 STP Depends on the configuration of the system including wired and wireless settings when it is configured to bring several networks we need enable STP 29 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 1 4 Management Services The system supports VLAN SNMP Remote Syslog and Auto Reboot functions for easy management These functions can be configured on this page Home Logout
49. ation Operating Mode Y Network pangeman Home gt System gt Management Services Management Services SNMP Configuration Disable Enable Community String Read Write Trap Disable Enable Server IP system Log Disable Enable SYSLOG Server IP 192 168 1 254 Server Port 514 SYSLOG Level Error UPnP Configuration Disable Enable Auto Reboot Disable Enable Reboot Time 02 00 e SNMP Configuration By enabling SNMP function the administrator can obtain the system information remotely gt Enable Disable Select Enable to activate this function or Disable to inactivate it gt Community String The community string is required when accessing the Management Information Base MIB of the system o Read Enter the community string for accessing the MIB with Read privilege o Write Enter the community string for accessing the MIB with Write privilege 85 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge gt Trap When enabled events on Cold Start Interface UP amp Down and Association amp Disassociation can be reported to an assigned server o Enable Disable Select Enable to activate this function or Disable to inactivate it o Server IP Address Enter the IP address of the assigned server for receiving the trap report e System Log By enabling this function specify a remote Syslog server to accept system log messages from the system remotely
50. atus gt DHCP Leases DHCP Leases DHCP Leases No IP MAC Address Expires in 1 192 168 1 2 00 0d 60 cb 76 82 22hours 15minutes 20seconds e No The item number of the LAN IP leased e IP The IP address assigned by DHCP server to a specific LAN device e MAC Address The MAC address of the LAN device e Expires in The expiration time of the leased IP address 109 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 5 4 UPnP Status The table provides information about the UPnP overview such as Protocol Internal Port External Port and IP Address Home OLogout 7Help ln E levelone mes 003 wireless Outdoor CPE AP Repeater gt y A amp System Wireless Firewall Utilities Status E A r A A j r System Overview Ewent Log 1 DHCP Lease 1 UPnP y Home gt Status UPnP Status UPnP Status IGD Portmap No Protocol Internal Port External Port IP Address e IGD Portmap gt No The item number of an UPnP device Protocol The Protocol used by the UPnP device Internal Port The internal port number of the UPnP device External Port The mapped external port number of the system IP Address The IP address of the UPnP device Y VV WV 110 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 6 Online Help The Help button is at the upper right hand corner of the display screen Click Help for the Online Help window and then click the hyperlink of the desired topic for
51. ding depending on different subscription plans e Full range of wireless security mechanisms such as WEP WPA and WPA2 802 111 that are important for enterprise wireless deployments e Acts as a Home Router for IP Sharing and firewall all in one installation solution no need for extra router e Purposely built rugged access point for harsh outdoor industrial conditions e Weatherproof and watertight from its rugged aluminum housing IP68 Approved e Power over Ethernet PoE built in for single cable installation e On board Ethernet surge protection e Multiple operation modes o AP Base Station Mode o WISP CPE Mode o WDS Bridge Mode o Universal Repeater Mode User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 1 3 Document Conventions Represents essential steps actions or messages that should not be ignored Note Contains related information that corresponds to a topic Indicates that clicking this button will save the changes you made but you must reboot the system upon the completion of all configuration settings for the changes to take effect Indicates that clicking this button will clear what you have set before the settings A are applied 2 System Overview 2 1 Package Contents The standard package of WAB 3003 includes e WAB 3003 x 1 e Quick Installation Guide QIG x 1 e CD ROM with User s Manual and QIG x 1 e PSE with AC cable x 1 e Mounting Kit x1 e Water Proof Connector ins
52. dmin Account management Root Account Account User Name root rot admin There are two system management accounts for AP amp CPE modes to maintain the system root and admin and each has different levels of management capabilities The root account is empowered with full privileges while the admin account is with partial ones there is only one management account for AP mode root For more information on the privileges of these two accounts please refer to Appendix A System Management Account Privileges lt AP Mode Default Mode gt Step 1 IP Segment Set up for Administrator PC Set a static IP address on the same subnet mask as WAB 3003 in TCP IP of the administrator PC such as the following example Do not duplicate the IP address used here with the IP address of WAB 3003 or any other devices within the same network gt gt Example of IP Segment The valid range of IP address is 1 254 However 1 must be avoided as it is already used by WAB 3003 Below depicts an example of using 100 the underlined value can be changed as desired e P Address 192 168 0 100 e Subnet Mask 255 255 255 0 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 2 Launch Web Browser Launch a web browser to access the web management interface of AP mode by entering the default IP address http 192 168 0 1 in the URL field and then press Enter WAB 3003 Windows Internet Explorer
53. e Max Transmit Rate Auto Transmit Power Auto ACK Timeout 0 0 255 O Auto Unit 4 micro seconds 87 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 2 1 General Settings This section is for configuring the system RF settings f Home Logout Help oo gt a a leve on WAB 3003 Wireless Outdoor CPE AP Repeater System Nireless Firewall Utilities Status General Advanced Security Y Site Survey A Home gt Wireless gt Genera General Settings Band 802 11b 802 11g ESSID Super G E Bursting El Fast Frames E Dynamic Turbo Short Preamble Disable Enable Max Transmit Rate Auto e Transmit Power Auto ACK Timeout 0 0 255 O Auto Unit 4 micro seconds e Band Select an appropriate wireless band 802 11b 802 11g or mixed mode 802 11b 802 119 or select Disable if the function is not required e ESSID The ESSID Service Set ID of the client device that the system is to be associated with e Super G Options of Bursting Fast Frames and Atheros featured Dynamic Turbo can be selected to boost wireless throughput e Short Preamble The short preamble with a 56 bit synchronization field can improve WLAN transmission efficiency Select Enable to use Short Preamble or Disable to use Long Preamble with a 128 bit synchronization field e Max Transmit Rate The maximum wireless transmitting rate Select the desired rate f
54. e OLogout Help a levelone was 3003 wireless Outdoor CPE AP Repeater System WARES Firewall Utilities Status NN A AAA ES i A A aan var Overview y General VAP Config Security y Repeater y Advanced Access Control Y Site Survey A 1 p p 5 i Y T Y L Home gt Wireless gt Repeater Config Repeater Settings Repeater Type None y 43 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e WDS The device supports up to 8 WDS peers After providing WDS peer s MAC address click on Add to add this link to the table shown on User Interface Home Logout 7Help 388 a leve Ne was 3003 Wireless Outdoor CPE AP Repeater System Nireless Firewall Utilities Status Y i 7 i VAP Overview General VAP Config Security Repeater Advanced Access Control Site Survey Home gt Wireless gt Repeater Config Repeater Settings Repeater Type WDS WDS Profile RF Card A WDS Link 1 WDS Disable MAC Address Security type None Site Distance 1000 meter s With optional smart Slot Time ACK Timeout and CTS Timeout generation Slot Time 13 micro second s ACK Timeout 29 micro second s CTS Timeout 29 micro second s gt Enable Select Enable to activate the specified WDS link gt MAC Address Enter the MAC address of the WDS peer Click Add to add it into the list gt Securi
55. e depicts an example of selecting Accton_ AP encrypted via WPA2 PSK security type gt Click Setup and then a related encryption configuration box will appear gt Enter the information required in the configuration box Information to be entered must be exactly the same as configured in this AP Click Connect to start the connection 21 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 6 Network Interface Configuration gt Click on the System button and then select the Network tab E Ba m eve O a WAB 3003 Wireless Outdoor CPE AP Repeater Home Logout 7 Help VAGn Wireless Firewall Utilities Status System Information Operating Mode Network Management gt Home gt System gt Network Interface WAN Configuration Mode Static DHCP IP Address 192 168 10 1 Metmask 255 255 255 0 Default Gateway 192 168 10 254 Primary DNS Server 168 95 1 1 Alternate DNS Server Bandwidth Limit Download Unlimited Upload Unlimited A Settings here are for example only WAN Configuration gt Enable Static and then enter the related information in the fields marked with red asterisks Click SAVE to save the settings Dynamic DNS Configuration gt The Dynamic DNS section is on the same page as WAN Configuration section gt When enabled choose the service Provider with provided Host Name User Name E mail and Password Key
56. eless Station Isolation Y Disable Enable WMM Disable Enable IAPP Y Disable Enable 802 11g Protection Y Disable Enable V r T 7 e RTS Threshold To control station access to the medium and to alleviate this effect of the hidden terminal problem the administrator can tune this RTS threshold value A lower RTS Threshold setting can be useful in areas where many client devices are associating with WAB 3003 or in areas where the clients are far apart and can detect only WAB 3003 and not each other e Fragmentation Threshold A unicast frame larger than this threshold will be fragmented before transmission If a significant number of collisions are occurring the administrator can try to set a smaller value of the threshold to see whether it helps A smaller value results in smaller packets but allows a larger number of packets in transmission A lower Fragment Threshold setting can be useful in areas where communication is poor or disturbed by a serious amount of radio interference 46 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Broadcast SSID Disabling this function will prevent the system from broadcasting its SSID If you disable broadcast of the SSID only devices that have the correct SSID can connect to the system Wireless Station Isolation By enabling this function all stations associated with the system can only communicate with the system WMM The default is Disable Wi Fi Multimedi
57. enable VLAN ID and specify a VLAN ID with respective ESSID Click SAVE to save the settings 16 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 5 Security Settings a evel ONR was 3003 Wireless Outdoor CPE AP Repeater gt gt 4 gt system Wireless Firewall Utilities j en i F A F 7 h A F 7 nn VAP cal Y Pilar WAP Config Ex Repeater Advanced j Access Control Site Survey A i Home Logout Help B Status Home gt Wireless gt Security Security Settings Profile Name VAP 1 w Security Type WEP apply to all VAPs 802 11 Authentication Y Open System Shared Key Auto WEP Key Length 64 bits 128 bits 152 bits WEP Key Format Y ASCI Hex WEP Key Index ne WEP Keys ca LEAR cc gt Click on the Wireless button and then select the Security tab Note The WEP keys are global setting for all virtual APs The key value will Select the desired VAP Profile and Security Type from the drop down list boxes The above figure depicts an example of selecting VAP 1 and WEP gt Enter the information required in the blank fields Caution You must use the same information provided here to configure the network devices that are to be associated with WAB 3003 gt Click SAVE to save all settings configured so far all updated se
58. er 4 System Wireless Firewall Utilities Status VAP Overview General VAP Config N Security Repeater Advanced 4 Access Control Site Survey Home gt Wireless gt Access Control Access Control Settings Profile Name VAP i Maximum Number of Clients 32 Range 1 37 Access Control Type Disable Access Control e Maximum Number of Clients The system supports various methods of authenticating clients for using wireless LAN The default policy is unlimited access without any authentication required To restrict the station number of wireless connections simply change the Maximum Number of Stations to a desired number For example while the number of stations is set to 20 only 20 stations are allowed to connect to the specified VAP e Access Control Type The selected Access Control Type will be the activated policy while the rest will be omitted The following is a list of the supported methods for MAC ACL control 1 Disable Access Control No MAC address check required 48 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 2 MAC ACL Allow List Deny all except those in the Allow List When selecting MAC ACL Allow List all wireless connections to the specified VAP will be denied except the MAC addresses listed in the Allow List allowed MAC addresses The administrator can disable any allowed MAC address to connect to the VAP temporarily by checking Disable For examp
59. es o 63 4 4 2 NEEWO RUI e 64 4 4 3 Configuration Save Restore sii ltd 65 4 4 4 Sy ENTU RGO nm iaa add atte 66 4 4 5 PROD OO liste vctirsa ree cd latencaesecicoiesesescanse ccs senesseeancaacscasuccasaesvisen ans vassassbeueatmeeionnasousase pase saane aueomaeaa tele 67 4 5 By MIS NS 68 4 5 1 SV SECM OVEN VIS Witt iia ana 69 4 5 2 ASSOCIa Led Cent o tatus nosia A A A AAA ASA 71 4 5 3 Repeater INON IO talar T2 4 5 4 BN ST Graae E T N O T T AT IEE 74 4 6 A a eoneaatistedenstiaaGateeaagtalenteases 75 CPE Mode Config ralo Missana AA 76 5 1 SIE ENI cota 78 5 1 1 SV SECM INTOM a tiO ains ad 79 Su eZ ODeracicMO done ea 81 5 1 3 NetWork S CUNO S nat abia 82 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 1 4 Management ServiCOS srono AE r E T APTA N A TTE 85 5 2 O sce shone EE accep dot T EAO A ETTE IEA AEE E TET 87 5 2 1 General OE cl enenenrere an OR SIR MUNDO Te Sen REET 88 5 2 2 Advanced Wireless SEINO Secs e Sn Nae 89 Da Zaid SECCU o es a ene et Reet aa ee ne eet 90 5 2 4 SO PI AATE 93 5 3 EIRE E AE E EE AA E E A e e A e 96 5 3 1 FP POE FORWarQInd cerrada a a 97 523 2 DEMINTar ZO Cr LON ela 98 5 4 O Se eM Tern He mTLLS eee eEEeNOe Sete eeNnr en a 99 5 4 1 Enange PASS WOF O ceesre arope EAE 100 5 4 2 NCEWOPK OCICS canero a aa tadas 101 5 4 3 conouration save Se Restore sudo diia Arias donate 102 5 4 4 System UDI Ein 103 5 4 5 PRS A A AI A A oe eaten ee 104 5 5 OO 105 5 5 1 SUSO OVE VI E N e a a E A aT NOR 106 519 2
60. estart the system Click OK to proceed or click Cancel to cancel the restart request Windows Internet Explorer E 2 Do you want to reboot the system A warning message as displayed below will appear during the reboot period The system power must be turned on before the completion of the reboot process 1 i h a F A Change Password Network Utilities Y Config Save amp Restore System Upgrade Reboot A Home Utilities gt Reboot Now rebooting the System Reboot may take several minutes to complete The home page will be shown after system boots up If the web page does not go back for a long time please click the following link The System Overview page will appear upon the completion of reboot 104 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 5 Status This section displays the status of System Overview Event Log DHCP Lease and UPnP Home OLogout 7 Help ln E evel ONE was 3003 Wireless Outdoor CPE AP Repeater y Firewall 7 Utilities System Wireless System Overview Y Event Log DHCP Lease 1 UPnP Home gt Status gt System Overview System Overview g gt System Radio Status system Name WAB 3003 Status Connected Firmware Version 1 00 01 SSID WLANI4 Build Number 1 12 1 2928 MAC Address 00 00 00 00 00 00 Location Greenwich Channel 6 Site EN E Signal Strength 0 Device Time 1999 12 31 17 28 04 Security None System Up Ti
61. f NTP server the DNS server must also be activated please refer to 5 1 3 Network Settings Device Time Time Zone Time NTP Server 1 NTP Server 2 2 Manually Time 1999 12 31 16 04 08 GMT 08 00 Pacific Time US8iCanada Tijuana M 8 Enable NTP Manually set up tock stdtime gov tw di set up By selecting Set manually set up the administrator can manually set the system date and time Device Time Time Zone Time Set Date Set Time Time 1999 12 31 16 04 08 GMT 08 00 Pacific Time US amp Canada Tijuana Enable NTP 9 Manually set up EDS Year e Month Day Hour Min 5 Sec Set Date Select the appropriate Year Month and Day from the drop down list box Set Time Select the appropriate Hour Min and Sec from the drop down list box 80 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 1 2 Operating Mode WAB 3003 supports two operation modes CPE mode and AP mode The administrator can set the desired mode on this page and then configure the system according to deployment needs Home OLogout Help ae level NE was 3003 Wireless Outdoor CPE AP Repeater gt A E SAG Wireless Firewall Utilities Status TT EE OOO OA A A 1 A k ee Information Operating Mode Network Management Home gt System gt Operating Mode Operating Mode e Operating Mode Select CPE M
62. f respective client s association e Idle Time Time period that the associated client is inactive the time unit is in second e Disconnect Click Kick to disconnect the client from this AP 71 4 5 3 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Repeater Information The administrator can review detailed information of the repeater function on this page Information of repeater s status mode and encryption is provided e WDS Link Status The table will be displayed when WDS mode is selected For more information on the repeater type please refer to Section 4 2 5 Repeater Settings gt gt gt Y VV WV Overview Status The status of the repeater function either Enabled or Disabled MAC Address The MAC Address of the WDS peer RSSI Received Signal Strength Indication a measurement of received radio signal over WDS link Tx Rate The transmit rate of the Repeater Tx Count The accumulative number of transmission counts Tx Error The accumulative number of transmission errors Encryption The encryption type used None WEP or WPA PSK Clients Repeater Event Log atus Repeater Information Repeater Information WDS Link Status Item Status MAC Address RSSI TX Rate TX Count TX Error Encryption 1 Enabled 0A 11 43 08 09 56 O 54 M 46 46 None 2 Disabled N A N A N A N A N A 3 Disabled N A N A N A N A N A 4 Disabled N A N A N A N A N A Fig 4 5 3 1 WDS 72 User
63. frequency band from Disable 802 11b 802 11g or mixed mode 802 11b 802 11g e Super G Options of Bursting Fast Frames and Atheros featured Dynamic Turbo can be selected to boost wireless throughput e Short Preamble The option can be turned on the enable Short Preamble frames e Channel Select the appropriate channel from the drop down list box to correspond with your network settings for example Channel 1 11 is available in North America and Channel 1 13 in Europe or choose the default Auto e Max Transmit Rate Select transmit rate from 1M to 54M or Auto e Transmit Power Select from the lowest to highest power level or choose Auto e Beacon Interval Enter a value between 100 and 500 ms The default is 100 milliseconds The specified value represents the amount of time between beacon signal transmissions 35 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge The RF settings in this page will be applied to all VAPs Under normal circumstances the available RF configurations are illustrated as below Short Max Transmit Transmit Band Channel Preamble Rate Power 1M 2M 5 5M Disable Enable 11M 802 11b Bursting 802 11 Compression Fast pic able Enable AMES eee a Frames Dynamic SAM Low Medium Turbo High Highest Bursting 2M 5 5M Compression Fast 9M 11M Frames Dynamic Pisa nen habe 18M 24M Turbo 48M 54M 802 11b 802 119 36 User s Manual WAB 3003 108M 11g Outdoor P
64. g Outdoor PoE CPE AP Bridge o WPA PSK Click Setup to configure the WPA PSK setting for associating with the target AP Accton_AP 00 22 2D 90 74 86 1 54 59 WPA2 PSK The following configuration box will then appear at the bottom of the screen For more information on the WPA PSK security settings please refer to Section 5 2 3 Security Settings Pre shared Cipher TKIP Pre shared Key Type psk Hex 64 chars Passphrase 8 63 chars Pre shared Key 95 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 3 Firewall The system supports the following firewall functions IP Port forwarding and DMZ Demilitarized Zone The administrator can allow a certain part of the network to be exposed to the Internet in limited and controlled ways for special purposes such as game and voice applications Home Logout 7 Help ln E i evel O N 3 WAB 3003 Wireless Outdoor CPE AP Repeater gt o a System Wireless AEREA Utilities A Status IP Port Forwarding DMZ h i Home gt Firewall gt 1P Port Forwarding IP Port Forwarding Service Name External Port Range Internal IP Address Protocol IP Port Forwarding Service External Port Item Name Range Internal IP Address Protocol State Delete Edit 96 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 3 1 IP Port Forwarding A certain p
65. gt Enable Disable Select Enable to activate this function or Disable to inactivate it gt SYSLOG Server IP The IP address of the Syslog server for receiving the reported events gt Server Port The port number of the Syslog server gt SYSLOG Level Select the desired level of received events from the drop down list box e UPnP Configuration This option can be enabled if UPnP service is required by LAN device gt Enable Disable Select Enable to activate this function or Disable to inactivate it e Auto Reboot The system can be functioning in a healthier state when this service is enabled gt Enable Disable Select Enable to activate this function or Disable to inactivate it gt Reboot Time Select an appropriate time from the drop down list box Since all users on the network will be disconnected during reboot it is suggested to set the reboot time during an off peak period to reduce impacts on the online users 86 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 2 Wireless This section is for configuring wireless settings for this system to associate with its uplink access point frHome Logout 7 Help a levelone wss 3003 wireless Outdoor CPE AP Repeater gt 4 y o 2 Firewall W Utilities Status General Home gt Wireless gt General Band 802 11b 802 11g ESSID Super G El Bursting Fast Frames Dynamic Turbo Short Preamble Disable Enabl
66. i siii 4 System OVER VIC W ias A AAA AAA RA A AAA EA A 5 2 1 A NA E O Bane ne 5 2 2 Panel Function CS CHDUELOM oe coe 6 MAS Ca ANON Sia A A AAA i 7 371 Hardware MVS Et EO sss sich ccs ee LON Oh 2 aa 7 3 2 Basic Go guile U Lats 16 a better ner ecient o io sre er mR RON Re enon nO 8 3 2 1 Introduction to Web Management Interface cnnccccnnoccccnoncnonunacanananananananananananonanananananess 8 3 2 2 QUIER Bie wae 0c 01 ON nen ete ee one ct a e A 13 AP Mode ContigUratiO Maia a 23 4 1 A A A A e a toate Go ahadtuees 25 4 1 1 Ns ets tat hatches deta ate T 26 4 1 2 Opera HL Ale MOG meee errr een one eta ll dos rte ites ee Smo irr 28 4 1 3 NetWork SENGS amina ala aa ci n 29 4 1 4 ManageMent ServiCOS 2 cccccccccssssccesssccessscscesssssecessssscessssscesssssscessssscesssesscsesssscesesecessessecens 30 4 1 5 Os Classical dadas 32 4 2 A A ee 33 4 2 1 VII ON VI Wald 34 4 2 2 ES AP II O A OOTY SSO 35 4 2 3 VAP CoOntQuUrat ON esti di li E N 37 4 2 4 SEEN N aa a a aa a a A 38 4 2 5 Repeater o eNO Sra ita 43 4 2 6 Advanced Wireless SettingS ooocnnncccnnncccconnccnnnnccnnnncconanaconanacananononanorananonananonanano rana noranancnnnass 46 4 2 7 ACCESS Control SOTANO a A A O 48 4 2 8 SILO SUVs laa 51 4 3 ci 53 4 3 1 Laver Z FIRGW alll SEUNS arni ea OE TOT NOE EOE 53 4 3 2 Firewall Service seeren nT T E E 60 4 3 3 Advanced Firewall CULMS sceniniu a a a a a 61 4 4 UI Soedan aaa a a 62 4 4 1 chande Pass WO aerae ea o e Sata at at
67. iation amp Disassociation can be reported to an assigned server o Enable Disable Select Enable to activate this function or Disable to inactivate it o Server IP Address Enter the IP address of the assigned server for receiving the trap report Syslog Configuration By enabling this function specify a remote syslog server which could accept system log messages from the system remotely Therefore by reading the syslog message in the remote server review activities of all installed the system in the network gt Enable Disable Select Enable to activate this function or Disable to inactivate it gt Server IP The IP address of the Syslog server for receiving the reported events gt Server Port The port number of the Syslog server gt Log Level Select the desired level of received events from the drop down list box Auto Reboot The option can be enabled to reboot system automatically with preferred Reboot Time from drop down list gt Enable Disable Select Enable to activate this function or Disable to deactivate it gt Reboot Time Select an appropriate time from the drop down list box Since all users on the network will be disconnected during reboot it is suggested to set the reboot time during an off peak period to reduce impacts on online users 31 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 1 5 QoS Classification Home OLogout Help ln E evel O MC was 3003 Wireless Outdoor CPE AP
68. ied according to FCC Rules Part 15 subpart C under one granted FCC ID FCC Caution This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator your body User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge FCC Class B Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates and uses radio frequency energy and if not installed and used in accordance with the instructions may cause interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television reception which can be determ
69. ined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna or cable input device Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CE Declaration of Conformity with Regard to the 1999 5 EC R amp TTE Directive for European Community Switzerland Norway Iceland and Liechtenstein Model WAB 3003 For 2 4 GHz radios the devices have been tested and passed the requirements of the following standards and hence fulfills the EMC and safety requirements of R amp TTE Directive within the CE marking requirement e Radio EN 300 328 2006 e Radio EN 50392 2004 e EMC EN 301 489 1 2005 EN 301 489 17 gt 2002 e EMC EN 55022 gt 2006 Class B EN 55024 1998 Al 2001 A2 2003 Including the followings EN 61000 3 2 EN 61000 3 3 EN 61000 4 2 EN 61000 4 3 EN 61000 4 4 EN 61000 4 5 EN 61000 4 6 EN 61000 4 11 e Safety EN 60950 1 2001 All gt 2004 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Table of Contents 1 Wand gee UCek uo Berremeence tire n ct meni cE Sie a San Set io 1 1 1 G3 dS ee renee ee eA PE Ron ER COR ne Bee ne RT nD Te nee ore ee 1 1 2 FUNCION MES ee tines 3 1 3 Document CONVENIO Si
70. ing information stated as clearly as possible Fields Name Description and Location are used for mnemonic purpose It is recommended to have different values in each wireless device gt Name The system name used to identify this system gt Description Further information of the system gt Location The information on geographical location of the system for the administrator to locate the system easily e Time Time settings allow the system time synchronized with NTP server or manually set gt Device Time Display the current time of the system gt Time Zone Select an appropriate time zone from the drop down list box gt Synchronization Synchronize the system time either by NTP server or manual setup 26 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 1 Enable NTP By selecting Enable NTP WAB 3003 can synchronize its system time with the NTP server automatically While this method is chosen at least one NTP server s IP address or domain name must be provided If FQDN full qualified domain name is used as the IP address of NTP server the DNS server must also be activated please refer to 4 1 3 Network Settings Device Time Time 1999 12 31 16 11 05 Time Zone GMT 08 00 Pacific Time US amp Canada Tijuana Time Enable NTP Manually set up NTP Server 1 tock stdtime gov tw NIP Server 2 2 Manually set up By selecting Manually set up the administrator c
71. k topology which can be used for testing and configuring the WAB 3003 PSE PoE Adaptor y Data Link WAB 3003 Data Link and Power Link to WAB 3003 Waterproot RJ 45 Connector Installation Steps Step 1 Connect an antenna to the connector Step 2 Connect the PSE POWER amp DATA OUT to the PSE 1 connector on the lower panel Step 3 Connect one end of an Ethernet cable to the PSE 2 connector on the lower panel and connect the other end to a computer Step 4 Connect the power cord to the PSE Step 5 Power on the PSE in order to supply power to the WAB 3003 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 3 2 Basic Configuration 3 2 1 Introduction to Web Management Interface WAB 3003 provides a user friendly web management interface for configuration As WAB 3003 is a dual mode system which can be configured as either an access point AP Mode or a gateway CPE Mode based on your needs it is required to follow the respective installation procedures provided to properly set up the desired mode for this system e Default IP Address of Web Management Interface The default IP address and Subnet Mask for the CPE mode and AP mode are as follows Mode AP Mode CPE Mode IP Address 192 168 0 1 192 168 0 1 255 255 255 0 255 255 255 0 e Default User Name and Password The default User name and Password for the root and admin accounts are as follows CPE Mode Root Account A
72. le 11 22 33 44 55 66 is in the Allow List to temporarily deny its access check Disable in the State section ft Home Logout 7 Help a l evel O FP Er WAB 3003 Wireless Outdoor CPE AP Repeater gt y o System Wireless Firewall Utilities Status Al 4 A f A 4 A VAP Overview General VAP Config Security Y Repeater Advanced Access Control Site Survey A L i Home gt Wireless gt Access Control Access Control Settings Profile Name VAP 1f Maximum Number of Clients 32 f Range 1 32 Access Control Type MAC ACL Allow List le No MAC Address State 1 11 22 33 44 55 66 Disable Enable 2 Disable Enable 3 9 Disable Enable 3 MAC ACL Deny List Allow all except those in the Deny List When selecting MAC ACL Deny List all wireless connections to the specified VAP will be allowed except the MAC addresses listed in the Deny List denied MAC addresses The administrator can allow any denied MAC address to connect to the VAP temporarily by checking Enable fi Home OLogout 7Help E evel O FA E WAB 3003 Wireless Outdoor CPE AP Repeater gt 4 y o E System Wireless Firewall Utilities Status FR Sh RA AAA Oe F h VAP Overview N General N WAP Config y Security Repeater j Advanced Access Control Y i Site Survey A Home Wireless gt Access Control Access Control Settings Profile Name
73. less Security Security Settings Security Type WEP 802 11 Authentication Y Open System Shared Key WEP Key Length 64 bits 128 bits 152 bits WEP Key Format Y ASCII Hex WEP Key Index ile WEP Keys 1 2 4 802 11 Authentication Select from Open System Shared Key or Auto WEP Key Length Select from 64 bit or 128 bit key length WEP Key Format Select from ASCII or Hex format for the WEP key Yv Vv V WV WEP Key Index Select a key index from 1 through 4 The WEP key index is a number that specifies which WEP key to use for the encryption of wireless frames during data transmission gt WEP Keys Provide WEP key value the system supports up to 4 sets of WEP keys 91 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e WPA PSK WPA PSK WI Fi Protected Access Pre shared Key supports pre shared key authentication and WPA data encryption TKIP AES fiHome Logout 7 Help a level ONE was 3003 wireless Outdoor CPE AP Repeater gt Y gt yA Wireless Firewall Utilities Status fa A a A General j Advanced Y Security A Site Survey A Home Wireless gt Security Security Settings Security Type WPA PSK w Cipher Suite TKIP WPA Pre shared Key Type 10 PSK Hex 64 chars Passphrase 8 63 chars Pre shared Key Group Key Update Period 600 second s gt Cipher Suite Select an encry
74. me O days 1 28 04 Operating Mode CPE 0 LAN Interface G WAN Interface MAC Address 00 1F D4 00 20 F0 Mode Static IP Address 192 168 0 1 MAC Address 00 1F D4 00 20 F1 Subnet Mask 255 255 255 0 IP Address 192 168 10 1 DHCP Server Enabled Subnet Mask 255 255 255 0 Gateway 192 168 100 254 Bandwidth Down Unlimited UP Unlimited 105 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 5 1 System Overview The System Overview page provides an overview of the system status for the administrator Home Logout 7Help aE evel O ne WAB 3003 Wireless Outdoor CPE AP Repeater gt y A Firewall Utilities SEWE a system i Wireless E rl k mn Overview IO ee IEA a Home gt Status gt System Overview System Overview gP System Radio Status System Name WAB 3003 Status Connected Firmware Version 1 00 01 SSID WBR 6002 Build Number 1 12 1 2928 MAC Address 00 C0 02 FF C7 8E Location Greenwich Channel 11 Site EN E Signal Strength 5 Device Time 1999 12 31 16 04 52 Security None System Up Time 0 days 0 04 52 OQ LAN Interface oC WAN Interface MAC Address 00 1F D4 00 20 FO Mode Static IP Address 192 168 0 1 MAC Address 00 1F D4 00 20 F1 Subnet Mask 255 255 255 0 IP Address 192 168 10 1 DHCP Server Enabled Subnet Mask 255 255 255 0 Gateway 192 168 10 254 Bandwidth Down Unlimited UP Unlimited 106 User s Manual WAB 3003 108M 11g Outdoor PoE CPE A
75. mentation Threshold An uncast frame larger than this threshold will be fragmented before transmission If a significant number of collisions are occurring the administrator can try to set a smaller value of the threshold to see whether it helps A smaller value results in smaller packets but allows a larger number of packets in transmission A lower Fragment Threshold setting can be useful in areas where communication is poor or disturbed by a serious amount of radio interference 89 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 2 3 Security Settings The system supports various authentication and data encryption methods The security type includes None WEP and WPA PSK AHome Logout 7 Help 38 evel O i WAB 3003 Wireless Outdoor CPE AP Repeater gt y o a System Wireless Firewall Utilities Status General y Advanced Y J i s Security site Survey A Home gt Wireless gt Security Security Settings Security Type None w e None No authentication is required 90 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e WEP WEP Wired Equivalent Privacy supports key length of 64 128 152 bits fHome Logout 7 Help P evel ONME was 3003 Wireless Outdoor CPE AP Repeater gt _ 5 y o gt System Wireless Firewall Utilities Status ae f Ni A General N Adwanced y Security Site Survey Home gt Wire
76. n click APPLY to execute the upgrade process The first step is to acquire the correct firmware file and Supply it in the User Interface field During firmware update please don t turn off the power to prevent from damaging the device permanently 7 Change Password Network Utilities Config Save amp Restore Y System Upgrade Reboot Home gt Utilities gt System Upgrade System Upgrade Current Version 1 00 01 Current Build Number 1 12 1 2928 File Name E S Upload Note e To prevent data loss during firmware upgrade please back up the current settings before proceeding further e Please restart the system after the upgrade Do not interrupt the system i e power on off during the upgrade or restart process as this may damage the system 103 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 4 5 Reboot The administrator can reboot the device remotely Click Restart to restart the system immediately fiHome Logout Help P llevelone mesos wre ss oido CPE AP Repeater gt gt y A Es System Wireless Firewall Utilities Status AA AAA AMAIA PAN K Ehange Password Network Utilities Config Save amp Restore Y System Upgrade Reboot Home Utilities gt Reboot Reboot the System Reboot may take several minutes to complete The Admin Login Page will be shown after system boots up A pop up screen will appear to confirm the request to r
77. ng by clicking on Reset The setting of the device can be backup to a file It can be used to duplicate setting to the other WAB 3003 device Change Password 1 Network Utilities Config Save amp Restore System Upgrade N Reboot h Home gt Utilities gt Config Save amp Restore Configuration Save amp Restore Reset to Default Reset Backup Settings Saye nestore Settinas Browse e Reset to Default gt Click Reset to load the factory default settings of WAB 3003 A pop up screen will appear to reconfirm the request to restart the system Click OK to proceed or click Cancel to cancel the restart request Microsoft Internet Explorer gt A warning message as displayed below will appear during the reboot period The system power must be turned on before the completion of the reboot process gt The System Overview page will appear upon the completion of reboot e Backup Settings Click Save to save the current system settings to a local disk such as the hard disk drive HDD of a local computer or a compact disc CD e Restore Settings Click Browse to search for a previously saved backup file and then click Upload to restore the settings The backup file will replace the active configuration file currently running on the system 102 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 4 4 System Upgrade To upgrade the system firmware click Browse to search for the new firmware file and the
78. nge Internal IP Address Protocol State 1 GAME 611 10 30 5 112 TCP UDP 2 Phone 6670 10 30 5 2450 TCP UDP 97 Disable Enable Disable Y Enable Delete Edit User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 3 2 Demilitarized Zone The DMZ Demilitarized Zone allows one local computer or server used as a DMZ host to be exposed to the Internet for special purpose Internet services such as functioning as a web server External users can access the DMZ host without authentication fiHome Logout 7 Help ln E levelone ws 3003 wireless Outdoor CPE AP Repeater gt y gt 5 JA Wireless ElreWall Utilities Status IP Port Forwarding y omz A Home gt Firewall gt Demilitarized Zone Demilitarized Zone State Disable Y Enable se Internal IP Address 192 168 10 0 e Enable Select Enable to activate this function or Disable to deactivate it e Internal IP Address Fill in the internal IP address to allow system forwarding traffic other than those specifically listed in P Port Forwarding 98 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 4 Utilities The system provides Change Password Network Utilities Configuration Save amp Restore System Upgrade and Reboot functions for maintenance ft Home OLogout 7 Help ln E evel ONE was 3003 Wireless Outdoor CPE AP Repeater a y E System Wireless Firewall Utilities Status
79. nt time on the device System Up Time The system elapsing time since last reboot Operating Mode Either CPE or AP LAN Interface MAC Address The MAC address of LAN Interface IP Address The IP address of the LAN Interface Subnet Mask The Subnet Mask of the LAN Interface Gateway The gateway of LAN interface MAC Address The MAC address of RF interface Band The operating band Radio Status Channel The operating channel Tx Power The level of transmitted power BSSID The BSSID MAC of AP ESSID The assigned ESSID of AP AP Status Security Type The security type of AP Online Client The number of online clients associated with AP 70 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 5 2 Associated Client Status The administrator can remotely oversee the status of all associated clients on this page Associated client s MAC SNR and Idle Time are listed in the table Overmiew Clients Repeater Y Event Log Home Status gt Wireless Clients Associated Client Status Client List Associated VAP ESSID MAC Address SNR dB ql Disconnect VAP 1 LevelOne 00 18 de de 0a 45 11 23 Kick e Associated VAP The specific VAP which the client is associated with e ESSID The Extended Service Set ID which the client is associated with e MAC Address The MAC address of associated clients e SNR The Signal to Noise Ratio o
80. oE CPE AP Bridge 4 2 3 VAP Configuration ft Home Logout 7 Help P level OnE wss003 wireless Outdoor CPE AP Repeater eS 4 y or E System Wireless Firewall Utilities Status VAP Overview General VAP Config Security Repeater y Advanced Y Access Control Site Survey A Home gt Wireless gt VAP Config VAP Configuration Profile Name VAP 1 w VAP Disable Enable Profile Name VAP 1 ESSID LevelOne VLAN ID 8 Disable Enable VLAN ID 1 4094 To enable each VAP the administrator must configure each VAP manually The settings of each VAP are collected as its profile VAP Enable or disable VAP function Profile Name The profile name of each VAP for identity management purpose ESSID ESSID Extended Service Set ID indicates a unique SSID used by a client device to associate with a specified VAP ESSID determines the service level assigned to a client VLAN ID The system supports tagged VLANs virtual LANs To enable VLAN function each VAP must have a unique VLAN ID valid values are ranged from 1 to 4094 37 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 4 Security Settings The system supports various user authentication and data encryption methods in each VAP profile Thus the administrator can depend on the need to provide different service levels to clients The security type includes None WEP 802 1X WPA PSK and WPA RADIUS e None No au
81. ode and then click SAVE to save the setting Note After clicking SAVE the system will immediately ask for a reboot to activate the selected mode 81 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 1 3 Network Settings WAN and LAN settings can be configured on this page f Home Logout THelp Es E eve on e WAB 3003 Wireless Outdoor CPE AP Repeater gt 4 y A System i Wireless i Firewall Utilities L Status Network Y Management Home gt System gt Network Interface WAN Configuration Mode static DHCP Renew IP Address 192 168 10 1 Netmask 255 255 255 0 Default Gateway 192 168 10 254 Primary DNS Server 168 95 1 1 s Alternate DNS Server Bandwidth Limit Download Unlimited gt Upload Unlimited Dynamic DNS DDNS DDNS Y Disable Enable Host Name User Name E mail Password Key LAN Configuration IP Address 192 168 0 1 Netmask 255 255 255 0 DHCP Server Disable Enable Start IP 192 168 0 2 A End IP 192 168 0 254 Preferred DNS Server 168 95 1 1 o Alternated DNS Server WINS Server IP Domain Name Lease Time d Day y 82 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e WAN Configuration Determine the way to obtain the IP address by Static or DHCP gt Mode Determine the way to obtain the IP address by D
82. ption method from TKIP WPA WPA2 and AES WPA WPA2 gt Pre shared Key Type Select a pre shared key type PSK Hex or Passphrase gt Pre shared Key Enter the key value for the pre shared key the format of the key value depends on the key type selected gt Group Key Update Period The time interval for the Group Key to be renewed Enter the time length required the time unit is in second 92 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 2 4 Site Survey The system can scan and display all Surrounding available access points APs The administrator can then select an AP to be associated with the system on this page Site Survey is a useful tool to provide information about the surrounding wireless environment available APs are shown with their respective SSID MAC Address Channel Rate setting Signal reading and Security type The administrator can click Setup or Connect to configure the wireless connection according to the mentioned readings Home Logout 7Help Es ev ONE wAB 3003 Wireless Outdoor CPE AP Repeater System Mills Firewall Utilities Status a General Y Advanced Y Security Site Survey A Home gt Wireless gt Site Survey Scan Result Scan Again SSID MAC Address Channel Rate Signal Security Setup Connect Accton_AP 00 22 2D0 90 4 86 1 3d 59 WPA2 PSK Setup WAP 0003 00 11 6B 60 64 05 6 54 40 WEF Setup wivi 00 19 70 2B F2 6D 11 54 a WPA2 PS5K Se
83. r Utilities Status E Firewall Wireless IVAP Overview General A WAP Config N Security Repeater N Adwanced Access Control Y Site Survey A Home gt Wireless gt VAP Overview VAP Overview VAP No ESSID State Security Type MAC ACL Advanced Settings 1 LevelOne Enabled None Disabled Edit 2 LevelOne Disabled Mone Disabled Edit 3 LevelOne Disabled None Disabled Edit 4 LevelOne Disabled None Disabled Edit 5 LevelOne Disabled None Disabled Edit 6 LevelOne Disabled None Disabled Edit 7 LevelOne Disabled None Disabled Edit 8 LevelOne Disabled None Disabled Edit 33 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 2 1 Virtual AP Overview An overall status is collected in this page including Enable Disable State Security Type MAC ACL state and Advanced Settings The system has 8 VAPs each has its own settings In this table please click on the hyperlink for further configuration of each VAP respectively mE leve NE wasB 3003 Wireless Outdoor CPE AP Repeater Home Logout 7 Help g gt System y WAP Overview Home Wireless gt VAP Overview VAP No uA BE La M ESSID LevelOne LevelOne LevelOne LevelOne LevelOne LevelOne LevelOne LevelOne _ gt Wireless State Enabled Disabled Disabled Disabled Disabled Disabled Disabled Disabled Firewall Y VAP Overview Security Type Mone None None None None None None None General
84. rom the drop down list box The system uses the highest possible rate when Auto is selected e Transmit Power The signal strength transmitted from the system Select among Auto Lowest Low Medium High and Highest from the drop down list box e ACK Timeout When packet loss is increasing over longer distance ACK Timeout can be used to alleviate this issue 88 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 5 2 2 Advanced Wireless Settings The administrator can set the RTS threshold and fragmentation threshold on this page In most circumstance the default settings can meet general requirements If occasionally wireless network needs to be tuned the following parameters will assist with that purpose fiHome Logout 7 Help Gal aE leve ONE was 3003 Wireless Outdoor CPE AP Repeater u A B System Nireless Firewall Utilities Status General Advanced Security Site Survey Home gt Wireless gt Advanced Advanced Wireless Settings RTS Threshold 2346 1 2346 Fragment Threshold 2346 256 2346 e RTS Threshold To control station access to the medium and to alleviate this effect of the hidden terminal problem the administrator can tune this RTS threshold value A lower RTS Threshold setting can be useful in areas where many client devices are associating with WAB 3003 or in areas where the clients are far apart and can detect only WAB 3003 and not each other e Frag
85. start request Microsoft Internet Explorer y This action will reboot system Go you want continue lt 4 Cancel gt A warning message as displayed below will appear during the reboot period The system power must be turned on before the completion of the reboot process gt The System Overview page will appear upon the completion of reboot e Backup System Settings Click Save to save the current system settings to a local disk such as the hard disk drive HDD of a local computer or a compact disc CD e Restore System Settings Click Browse to search for a previously saved backup file and then click Upload to restore the settings The backup file will replace the active configuration file currently running on the system 65 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 4 4 System Upgrade To upgrade the system firmware click Browse to search for the new firmware file and then click Apply to execute the upgrade process The first step is to acquire the correct firmware file and Supply it in the User Interface field During firmware update please don t turn off the power to prevent from damaging the device permanently fi Home Logout 7Help E levelone ws 3003 wireless Outdoor CPE AP Repeater System Wireless Firewall Utilities Status g gt A B Change Password N Network Utilities Y Config Save amp Restore System Upgrade i Reboot A Home gt Utilities
86. talled x1 Caution User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge It is highly recommended to use all the components supplied to ensure best performance of the system User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 2 2 Panel Function Description WAB 3003 Reset Button Scerw i Ow PS ee a TSN iw e eto e3 iid oe Ons ETO ee Power Red LED ON indicated Power on and OFF indicates power off Wireless Signal Strength For showing the signal strength situation 2 Yellow 3 Green 4 WLAN Green LED ON indicates system ready Wireless Signal Strength For Showing the signal strength situation Ethernet Green LED ON indicates connection OFF indicates no connection and BLINKING indicates transmitting data RJ 45 PoE Connector For connecting to the Power Sourcing Equipment PSE N type Connector For connecting to an antenna Reset Button Screw For testing the system of AP Reset Procedure Make sure the WAB 3003 completes booting and is already running The booting process of system usually takes 2 minutes Unscrew the screw then you will see the reset button inside the hole Use the provided reset pin to press and hold the reset button for 15 seconds Release the reset button and leave the system re booting for 2minutes User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 3 1 nstallation 3 1 Hardware Installation The following diagram is a basic networ
87. tand wind rain lightning power surges and extreme temperatures The following is a network diagram for a typical WISP application User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge DY WAB 3003 CPE Mode WAB 3003 AP Mode JJ WAB 3003 CPE Mode gee eee et tees 5 e E aa miis Business Users Home Users s os a 8 s z E WAB 3003 Long range wireless transmission The WAB 3003 can be deployed in various environments for example e Hot zones such as business districts office complexes airports hotels conference centers recreation areas and shopping malls e Wireless CPE for Multi Dwelling Unit MDU Multi Tenant Unit MTU such as apartments dormitories and office complexes e Outdoor access point for school campuses enterprise campuses or manufacture plants e Indoor access point for hotels factories or warehouses where metal industrial grade devices are preferred e Public hotspot operation for caf parks convention centers shopping malls or airports e Wireless coverage for indoor and outdoor ground for private resorts acre estate home s yards or gulf course communities User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 1 2 Functionalities e Acts as a Wireless Modem to bring wireless bandwidth to home and office buildings e Wireless Bandwidth Allocation uplink downlink delivered to each buil
88. tdoor CPE AP Repeater gt gt ATA e System Wireless Firewall Utilities status Change Password Network Utilities Config Save amp Restore System Upgrade Reboot N Home gt Utilities gt Network Utilities Network Utilities Ping Host Domain IP www google com ping www google com 66 249 89 147 56 data bytes E 64 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 4 3 Configuration Save amp Restore This function is used to backup or restore the current settings The system can be restored to the default setting by clicking on Reset The setting of the device can be back up to a file It can be used to duplicate setting to the other WAB 3003 device ft Home Logout 7 Help T Ilevel OnE wae 3003 wireless Outdoor CPE AP Repeater A a System Wireless Firewall Utilities Status Change Password Network Utilities Config Save amp Restore Y system Upgrade 1 Reboot Home gt Utilities gt Config Save E Restore Configuration Backup amp Restore Reset to Default Reset Backup System Settings Backup Restore System Settings ale Restore e Reset to Default gt Click Reset to load the factory default settings of WAB 3003 A pop up screen will appear to reconfirm the request to restart the system Click OK to proceed or click Cancel to cancel the re
89. thentication is required Home Logout 7Help mE levelone ws 3003 wireless Outdoor CPE AP Repeater 4 y A 2 g gt System Wireless Firewall Utilities Status N rh E General y VAP Config Ce 1 A A EA A pere Overview A Security Repeater Advanced y Access Control Site Survey Y in Y h Y 2 Home gt Wireless gt Security Security Settings Profile Name VAP 1 Security Type None 38 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e WEP WEP Wired Equivalent Privacy supports key length of 64 128 152 bits fHome Logout 7 Help ln E level ONE wae 3003 wireless Outdoor CPE AP Repeater gt y a B System Wireless Firewall Utilities Status F N j T a A i A j A gt a VAP Overview General WAP Config Security l Repeater Advanced j Access Control Site Survey Home gt Wireless gt Security Security Settings Profile Name VAP 1 v Security Type WEP lr Note The WEP keys are global setting for all virtual APs The key value will apply to all WAPs 302 11 Authentication Y Open System Shared Key Auto WEP Key Length 64 bits 128 bits 152 bits WEP Key Format ASCII Hex WEP Key Index 11 y WEP Keys 802 11 Authentication Select from Open System Shared Key or Auto
90. ties JEWE Clients Repeater Event Log b Home gt Status gt System Overview System Overview UP System 8 Radio Status System Name WAB 3003 MAC Address 00 1F 04 00 20 F1 Firmware Version 1 00 01 Band 02 11b g Build Number 1 12 1 2928 Channel 1 Location Greenwich TX Power Highest Site EN E Device Time 1999 12 31 16 01 07 System Up Time 0 days 0 01 07 Operating Mode AP 9 LAN Interface AP Status MAC Address 00 1F D4 00 20 FO pans BSSID ESSID ae a ne IP Address 192 168 0 1 VAP 1 00 1F D4 00 20 F1 LevelOne None O Subnet Mask 255 255 255 0 Gateway 197 168 0 254 gt Ensure that the Operating Mode is currently at AP mode gt Click on the Status button and then select the System Overview tab The Operating Mode is at the System section on the System Overview page Note For more information on switching to AP mode if it is not currently active please refer to AP Mode Section 4 1 2 Operating Mode 13 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 2 Change Password fHome Logout 7Help aE evel O FA ES WAB 3003 Wireless Outdoor CPE AP Repeater eS 4 y System Wireless Firewall Utilities Status yj Change Password Network Utilities config Save amp Restore j System Upgrade Reboot ji ql Home gt Utilities gt Change Password Change Password Name root Old Password TITT New Password eesse up to 32 characters Re enter New
91. ttings will take effect upon reboot Congratulations The AP mode is now successfully configured 17 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge lt CPE Mode gt Step 1 Mode Confirmation Home Logout Help ln E evel O MN WAB 3003 Wireless Outdoor CPE AP Repeater gt gt A System Wireless Firewall Utilities Status Event Log DHCP Lease Y UPnP Y A Home gt Status gt System Overview System Overview gP System Radio Status System Name WAB 3003 Status Connected Firmware Version 1 00 01 SSID WBR 6002 Build Number 1 12 1 2928 MAC Address 00 C0 02 FF C7 8E Location Greenwich Channel 11 Site EN E Signal Strength 5 Device Time 1999 12 31 16 04 52 Security None System Up Time 0 days 0 04 52 OQ LAN Interface WAN Interface MAC Address 00 1F D4 00 20 FO Mode Static IP Address 192 168 0 1 MAC Address 00 1F D4 00 20 F1 Subnet Mask 255 255 255 0 IP Address 192 168 10 1 DHCP Server Enabled Subnet Mask 255 255 255 0 Gateway 192 168 10 254 Bandwidth Down Unlimited UP Unlimited gt Ensure that the Operating Mode is currently at CPE mode gt Click on the Status button and then select the System Overview tab The Operating Mode is at the System section on the System Overview page Note For more information on switching to CPE mode if it is not currently active please refer to Section 5 1 2 Operating Mode 18 Step 2 Change Pass
92. tup Pre shared Cipher TKIP Pre shared Key Type PSK Hex 64 chars e Passphrase 8 63 chars Pre shared Key Connect Figure 5 2 4 1 AP Scan Result example only e SSID The SSID Service Set ID of the AP found in the system s coverage area e MAC Address The MAC address of the respective AP e Channel The channel number currently used by the respective AP e Rate The transmitting rate of the respective AP e Signal The signal strength of the respective AP e Security The encryption type used by the respective AP 93 e Setup Connect gt User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Connect Click Connect to associate with the respective AP directly no further configuration is required AP 00 1 04 39 10 4 11 ad 49 None Connected Setup Click Setup to configure security settings for associating with the respective AP or repeater o WEP Click Setup to configure the WEP setting for associating with the target AP WAP 0003 00 11 6B 60 64 05 6 a4 40 WEP setup The following configuration box will then appear at the bottom of the screen For more information on the WEP security settings please refer to Section 5 2 3 Security Settings WEP Key Type Y Open Shared WEP Key Length 64 bits 128 bits 152 bits WEP Key Format Y ASCII Hex WEP Key Index 1 7 WEP Keys 1 2 3 4 Connect 94 User s Manual WAB 3003 108M 11
93. ty Type Select an appropriate security type for the WDS link either None WEP or TKI P AES the type selected needs to be the same as the one configured at the WDS peer gt Site Distance Fill in the distance from the farthest WDS peer to derive the suggested values for Slot Time ACK Timeout and CTS Timeout gt Slot Time With the concern of common medium access Slot Time will allow the station to learn possible access from other station at the beginning of previous slot This value Should be equal or less than half of ACK CTS Timeout gt ACK Timeout A valid 802 11 data transmission will be acknowledged with suck ACK from the receiving radio or the retransmission will start if such ACK is not received within Timeout period This value should be set equal or larger than RTT to the farthest WDS peer gt CTS Timeout This CTS acknowledges the previous sent RTS request in 802 11 common medium access Its Timeout value can be treated the same as that for ACK Timeout and should be set equal or larger than RTT to the farthest WDS peer 44 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge e Universal Repeater If Universal Repeater is chosen please provide the SSID of upper bound AP for uplink connection Security Type None WEP or WPA PSK can be configured for this Repeater connection Please note the security type configured here needs to be the same as upper bound AP to be connected VAP Overview General V
94. vap 1 Maximum Number of Clients 32 Range 1 32 Access Control Type MAC ACL Deny List No MAC Address State i 1a 2b 3c 4d 5e 6f Disable 9 Enable 2 9 Disable Enable 3 9 Disable Enable 49 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 RADIUS ACL Authenticate incoming MAC addresses by RADIUS When selecting RADIUS ACL all incoming MAC addresses will be authenticated by RADIUS Please note that each VAP s MAC ACL and its security type showing on the Security Settings page share the same RADIUS configuration fHome Logout 7Help cs E level orne was 3003 wireless Outdoor CPE AP Repeater 4 y o e System Wireless Firewall Utilities Status A O A WAP Overview General Y VAP Config Security Repeater Advanced Site Survey Y k i h Home gt Wireless gt Access Control r Y Access Control Y T A Access Control Settings Profile Name VAP 1 v Maximum Number of Clients 32 f Range 1 32 Access Control Type RADIUS ACL T Primary RADIUS Server Note These settings will also apply to security settings which use RADIUS Server for this VAP Hast f Domain Name IP Address Authentication Port 1812 1 65535 Secret Key gt Secondary RADIUS Server Host j Authentication Port 1812 Secret Key 50 User s Manual
95. vice Time 1999 12 31 16 11 05 Time Zone GMT 08 00 Pacific Time US amp Canada Tijuana Time Enable NTP Manually set up Set Date fvear y month bay Set Time Hour y Min m sec E E Note A system restart is required when a reminding message appears after clicking the SAVE button all settings entered and saved will take effect only after the system restart 25 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge 4 1 1 System Information For maintenance purpose it is required to specify the system name its location and corresponding basic parameters Fields such as Name Description and Location are used for mnemonic purpose It is recommended to have different values in each AP fi Home Logout 7Help PE ev e O FA WAB 3003 Wireless Outdoor CPE AP Repeater gt _ y e amp System Wireless Firewall Utilities Status System Information Operating Mode y Network Management NJ QoS Classification N Home gt System gt General System Information Name WAB 3003 i Description Location Time Time Zone GMT 08 00 Pacific Time US8Canada Tijuana Time Enable NTP Manually set up Set Date le Year aia month bay Set Time df ps Hour as Min as sec e System Information For maintenance purpose it is recommended to have the follow
96. word PE levelone was 3003 wireless Outdoor CPE AP Repeater gt 4 System Wireless User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge fi Home Logout 7 Help gt j Firewall Es Status y T hange Password Network Utilities Config Save amp Restore System Upgrade Reboot N Home gt Utilities gt Change Password Name Old Password New Password Re enter New Password Name New Password Re enter New Password Change Password root admin Click on the Utilities button and then select the Change Password tab up to 32 characters up to 32 characters e Enter the old password in the Old Password field which default password is admin Enter a new password in the New Password field and retype it in the Re enter New gt gt Change Root Account Password Password field gt Change Admin Account Password Enter a new password in the New Password field and retype it in the Re enter New Password field gt Click SAVE to save the changes 19 User s Manual WAB 3003 108M 11g Outdoor PoE CPE AP Bridge Step 3 Site Survey fi Home Logout 7 Help ln E levelone ws 3003 wireless Outdoor CPE AP Repeater System Wireless Firewall Utilities Status Faz E 7 gt i a General y Advanced Security Ee anaj Home gt Wireless gt Site

WAB-3003 108M 11g Outdoor PoE CPE/AP/Bridge

Contents

Download Pdf Manuals

Related Search

Related Contents