Zelio Logic 2 User Manual _11-2007
Contents
1. 68 SR2MANO1 11 2007 TRANSFER Menu Backup Memory Module Transfer Procedure for transferring the application from the backup memory to the smart relay for a smart relay with LCD and keyboard Step Action 1 Insert the EEPROM cartridge SR2 MEMO2 with the program to be transferred into the slot provided Select the transfer type MEMORY gt ZELIO using the navigation keys v 4 Confirm the transfer command with the Menu OK key Wait for the transfer to end Display gt gt gt MODULE then TRANSFER OK when it is complete Confirm again by pressing Menu OK to exit the menu Result the display returns to the INPUTS OUTPUTS screen in RUN mode and to the MAIN menu in STOP mode Procedure for transferring the application from the backup memory to the smart relay for a smart relay without LCD or keyboard Step Action 1 Since the smart relay is not powered on insert the EEPROM cartridge SR2 MEMO2 into the slot provided 2 Power up the smart relay During the transfer the LED display is off 3 Wait for the transfer to end During the transfer the LED display is off then at the end of the transfer the LED flashes 4 e Ifthe flashing is slow 3 Hz the transfer has been successful the smart relay is in RUN remove the EEPROM cartridge SR2 MEMO2 e Ifthe flashing is rapid 5Hz the transfer has failed due to incompatibility between the2. TRANSFER Menu Module gt Backup Memory Transfer Note if an application is already present in the backup memory it will be overwritten by the new transfer no test is performed to check the memory is free Note It is not possible to directly transfer an application created with version V2 of the programming software from the SR2 MEM01 memory to the smart relay if this latter contains version V3 firmware In this case see what action you should take in the section Program incompatible with firmware of the module see Application incompatible with firmware on the smart relay p 70 For more information about the compatibility of the memory cartridges see Compatibility between the memory cartridges and the version of the firmware on the smart relay p 195 Procedure for transferring the application from the smart relay to the backup memory Step Action 1 Insert the EEPROM cartridge SR2 MEMO2 into the slot provided 2 Select the transfer type MEMORY gt ZELIO using the navigation keys v A 3 Confirm the transfer command with the Menu OK key Enter the password if the program is password protected 4 Wait for the transfer to end Display gt gt gt MEMORY then TRANSFER OK when it is complete 5 Confirm again by pressing Menu OK key to exit the menu Result The display returns to the INPUTS OUTPUTS screen in RUN mode and to the MAIN menu in STOP mode
3. configuration necessary for the program to be transferred and that of the smart relay Note When the smart relay is in STOP mode the LED display is lit and does not flash SR2MANO1 11 2007 69
Download Pdf Manuals
Related Search