User Manual Remote Control
Contents
1. COLOR TEMPERATURE Power switch Colour temperature digital display Intensity level digital display Green magenta offset status LED Power output female connector Colour temperature adjustment buttons Intensity adjustment buttons Green magenta adjustment button ONOoRWNMS gt Rear view 1 Fuse receptacle 1 x 15A 2 XLR4 DC input 10 35VDC 14 4 PLACING INTO OPERATION 1 Quick link swivel ball head mounting Align the swivel ball head plate to the four rivets located at the back of the lamp head as shown in the picture On mounting the lamp head on any type of support tripod or ceiling Warning grid make sure the swivel ball head handle is facing down towards the ground Slide the swivel ball head plate until the four shoulder rivets drop into the receptacle The locking pin will snap into place when the plate is properly seated Make sure the locking pin has totally entered in his housing before N Warning proceeding to use the light fixture The standard swivel ball head comes with a 3 8 pin to be clamped into a grip head and allows the lamp head to be oriented and locked in a broad range of angles Removing the quick link swivel ball head Pull up on the locking pin and slide the swivel ball head plate until the four rivets get free Extract the swivel ball head by pulling it upwards 15 5 POWER CONNECTION VAC Control Unit 2 0 Exclusively AC powered and2. The silent grid cloth Softbox softens and broadens the light beam with minimal colour NOTE temperature shift Excellent for softening harsh edges SOFTBOX CLOTH FLAMEPROOF RATING The Rosco softbox has been manufactured with Cinebounce black cloth which meets the flameproof standard UNE EN 13773 2003 class 1 23 9 SPECIFICATIONS COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA CORRECTION CHI DIMENSIONS WEIGHT POWER DRAW BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING OPTIONS ACCESSORIES COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA CORRECTION CHI DIMENSIONS WEIGHT POWER DRAW BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING OPTIONS ACCESSORIES 4LONG adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K 90 622 x 205 x 70 mm 4 4 kg 147W Nominal 196W Maximum variable from 30 to 75 standard 35 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Philllips high power LED with a selected BIN Fresnel lens CPU control with THELIGHT software quick link swivel ball head with 10mm pin adjustable yoke 4x4 adjustable yoke to mount up to four lamp heads softbox diffuser hilite quarter half and full silent grid cloth options removable barn doors waterproof case 6LIGHT adjustable from 2500K a 6500K 100K increment
3. Shown on the diagram are the THELIGHT lamp head chromaticity coordinates x y CIE 1 931 feed and digitally controlled by its Control Unit and they are compared with the reference illuminants These reference illuminants are the Planckian locus radiator set below 5000K and the CIE daylight reference is set over 5000K The Planckian locus radiator references the chromaticity for several tungsten lamps colour temperatures while the daylight locus typify daylight type D illuminants The diagram evidence the light emanated by THELIGHT luminary at every colour temperature entirely matches with the described locus reference so that the colour of the light produced is essentially the same as incandescent and daylight It is also remarkable the minimum green magenta deviation over the locus reference along the range of colour temperatures means minimal difference between THELIGHT chromaticity coordinates and the ideal reference line CALIBRATION The Instrument Systems scanning spectrometer model Spectro 320 serial number 309328004 with its accessory TOP 100 has been calibrated according to the United States National Institute of Standards NIST and the german Physikalisch Technische Bundesanstalt PTB standard references ACCURACY The Instrument Systems scanning spectrometer model Spectro 320 serial number 30932004 with its accessory TOP 100 has an imprecision over the spectral radiometric results delivered lower than 196 Specifications subject
4. Unit 4LONG STUDIO 3LONG STUDIO 2LONG STUDIO 6LIGHT STUDIO SLIGHT STUDIO 4LIGHT STUDIO 3LIGHT STUDIO 2LIGHT STUDIO MANUFACTURED BY Thelight luminary for cine and tv S L MANUFACTURED IN Badalona BARCELONA SPAIN MARK THELIGHT COMPLY WITH THE CE DIRECTIVES GENERAL SECURITY 2001 95 CE EN 60598 1 2003 A1 2006 Luminaries general requirements DIRECTIVE 2004 108 CE Electromagnetic Compatibility E M C ELECTROMAGNETIC COMPATIBILITY THELIGHT is intended to Electromagnetic Environment E2 Commercial and light industrial STANDARD EN 61000 6 1 2005 Electromagnetic Compatibility Generic immunity standard Residential and light industry EN 61000 6 3 2005 Electromagnetic Compatibility Generic EMI standard Residential and light industry IEC EN 61000 6 4 2005 Generic Industrial environments emission radiated EN 301489 1 v1 8 1 2008 02 Radio Electric Spectrum 1 6 GHz Band EN 61000 3 2 2001 A2 2006 Harmonic current emissions a c Mains EN 61000 3 3 1997 A2 2006 Voltage fluctuations and Flicker a c Mains UNE EN 55015 2007 A1 2008 A2 2009 EMI of electrical lighting and similar equipment CISPR 15 2005 EN 55015 1 2006 Lighting and similar equipment radioelectric radiation conducted emissions radiated current Badalona 27th August 2012 Javier Fdez De Valderrama Authorized Administrator 32 WARRANTY THELIGHT high power LED light equipments are guaranteed to be free from defects in wor
5. temperature in NOTE increments of 100 Kelvin 19 DIMMER Light intensity variation The dimmer of the Control Unit is totally digital and guarantees the regulation of light intensity with minimal changes in the selected colour temperature Light intensity can be easily increased or reduced through the buttons located at the Control Unit front panel Above them a digital display indicates the selected dimmer value from a minimum of 1 to a maximum of 9 Push the button to increase light intensity or push the button to decrease it If you keep pushed any of the buttons the you will get a continuous variation NOTE Every push on the buttons will increase or decrease the light intensity in increments of stop GREEN Green magenta correction Green magenta bias button located at the Control Unit front panel lets you easily alter the colour of the light towards green or magenta in increments of 1 8 and Push the Green button to offset the selected white light A magenta or a green LED turns on the selected value to warn that the light emitted no longer guarantees the correct chromaticity THELIGHT guarantees the correct colorimetry for light emitting from their high power NOTE LED light fixtures calibrated in the laboratory according to current international standards of the CIE 13 3 1995 for the average CRI and the chromatic co ordinates x y CIE 1931 This certifies that our luminar
6. to change without notice THELIGHT technology is protected under Spanish license laws with international patents pending THELIGHT luminary for cine and tv S L www thelight com es 27 PHOTOMETRICS 24 fps 500 ASA ALONG e0 www cd6 upc edu 5600K 3200K Lux F Stop Fc meters Fc F Stop Lux 14000 22 1300 1 1110 22 12000 1800 8 1 3 165 3 148 8 1600 500 4 1 3 46 5 39 4 420 4LIGHT 5600K 3200K Lux F Stop Fc meters Fc F Stop Lux 7000 16 1 3 650 1 580 16 6800 900 5 6 1 3 83 3 78 5 6 740 300 2 8 1 3 28 6 26 2 8 1 3 280 6LIGHT 5600K 3200K Lux F Stop Fc meters Fc F Stop Lux 12500 22 1160 1 925 16 2 3 10000 1500 8 130 3 110 5 6 2 3 1200 450 4 41 B 35 2 8 2 8 380 Headings made with scanning spectrometer at stable temperature Control Unit set at maximum light intensity Turbo On and dimmer at 9 setting lamp head at standard flat setting and measurement instrument positioned perpendicular over the luminary surface center CALIBRATION The Instrument Systems scanning spectrometer model Spectro 320 serial number 30932004 with its accessory TOP 100 has been calibrated according to the United States National Institute of Standards NIST and the German Physikalisch Technische Bundesanstalt PTB standard references ACCURACY The Instrument Systems scanning spectrometer model Spectro 320 serial number 30932004 with its accessory TOP 100 has an imprecision over the spectral radiometric results delivered lower than 196 Specifications
7. Remote control high power LED panels 4X UOKNYS 000000 DUDA User s Manual DWEUVOWL THELIGHT Luminary for cine and TV S October 2012 INTRODUCTION This guide provides information about how to use the product functions to illuminate with this equipment as well as warnings on his use The ALONG 4LIGHT and SLIGHT are products of professional use for interior locations or studio and must be operated only by qualified technical personnel To obtain the maximum features please read the following operating instructions very carefully before using this fixture for the first time Please keep these operating instructions for you and subsequent users to reference in the future Safety Precautions Exemption from Liability Warranty www thelight com es THELIGHT Luminary for cine and TV S L For your own safety please read and follow all safety instructions and warnings THELIGHT Luminary for cinema and TV S L does not assume any responsibility for lighting failures caused by malfunction of this product The manufacturer disclaims liability for any damage to persons or property caused by inappropriate operation damage of this kind lies in the responsibility of the operator This product is manufactured to local specifications and the warranty is valid within the country of purchase Should the product fail or malfunction while you are abroad the manufacturer assumes no responsibility for servicing the product locally o
8. TERY MOUNT OPTIONS ACCESSORIES 172 x173 x87 mm 1 5 kg 10 35 VDC through XLR4 connector eOKHz flickerfree up to S000fps still photography up to 1 6000 sec 1x15A Vlock or Gold battery mount hexagonal 16mm baby spud to mount on a stand 5 or 10 meters extension cables 25 VAC Control Unit 2 0 DIMENSIONS WEIGHT POWER SUPPLY INPUT FREQUENCY OUTPUT FREQUENCY FUSE DMX512 ACCESSORIES 334 x 173 x 87 mm 2 7 kg Universal 90 264 VAC 50 60Hz 20KHz flickerfree up to S000fps still photography up to 1 6000 sec 2x 250A XLR5 in amp out connectors hexagonal 16mm baby spud to mount on a stand 5 or 10 meters extension cables AC DC Control Unit DIMENSIONS WEIGHT DC POWER SUPPLY AC POWER SUPPLY INPUT FREGUENCY OUTPUT FREGUENCY DC FUSE AC FUSE BATTERY MOUNT OPTIONS DMX512 ACCESSORIES 390 x 173 x 87 mm 3 4 kg 24 35 VDC through XLR4 connector Universal 90 264 VAC 50 60Hz 20KHz flickerfree up to S000fps still photography up to 1 6000 sec 2x15A 1x2 5A Vlock or Gold battery mount XLR5 in amp out connectors hexagonal 16mm baby spud to mount on a stand 5 or 10 meters extension cables 26 CHROMATITY COORDINATES DIAGRAM eo x y CIE 1931 ss 530 x vs y planckian locus Tc 5000K daylight Tc 5000K S38 e xvsy THELIGHT aay iu 0 5 80 w0 N wW 134 sm 470 0 0 0 L 0 0 O en eo C eo J eo Oo 0 4 X e S amp S h2 e T
9. a fn 33 1 MAIN FEATURES 4LONG ALIGHT GLIGHT are LED panels housing a total of 192 high power LED 4LONG 96 high power LED 6LIGHT 144 high power LED 6LIGHT They have been specially designed and their colorimetry calibrated for professional photography cinematography and television industry use THELIGHT luminaries main innovative features are e Variable Colour Temperature with almost no lost in light output e Stable colour dimming e Green magenta correction e Adjustable light beam from 30 up to 125 without changing lenses Silent fan free operation e High power Phillips LED 50 000 hours life e 90 CRI digitally calibrated light e Robust aluminium construction e Digital control and through DMX e Flicker free up to 3 000 fps e Very high light output Low power draw NOTE ABOUT MEASURING COLOUR TEMPERATURE CCT ALONG ALIGHT 6LIGHT incorporate the innovative THELIGHT technology based on high power LED triplets Fresnel lens CPU control software to obtain the wide range of calibrated colour temperatures combined with a high colour rendering index CCT We must remark that colour meters in use today are designed for a full spectrum source such as incandescent lights and therefore cannot be used to accurately read the correlated colour temperature CCT of the light emitted by THELIGHT and other LED light fixtures The eventual diversions to green display as CC5M or CC10M in hand held colour meters are due t
10. i n teet 16 ECorinecting the Bewel OBDIB aq dates GbO n anten cap bri a ute serre 16 Connecting batteries 16 Connecting Control Unit and lamp head cssssssssssssessessssssecscssssssssnessesesssssssessessees 17 Disconnecting the extension cable sss 17 Placing the Control Unit in the stand mast 18 SSCP Ty OA ES otto up deuten aeo etenctdbatan tu tdm anke HB bna o au t d 18 D Digital Adjustments c opo ead travel neben Pea E AEE Eea 19 PRI the Power TR ZEIT sedens n ZBNOR Re 19 COLOR TEMPERATURE ico dtt ee puta ert Qu ec i ain 19 DIMMER SEC cake n atcha ela es ine at a 20 By OREEN ect EU EM 20 7 DMX 512 Otro aa a pit a a RN ee aad ch Mai 21 8 Mechanical Adjustments seen nennen tenen 22 Bear angle verlatorise tees tete RR dr arae eda ea votes 22 Ear doors Installation ssec ee etit ta betonte 22 Softbox diffuser Insballatiph sss e Pocta eb enses ub see e NA n EE 23 5 DPOC ACIDI ono oo E A A 24 LENIN s eae e e RT RT ADE TR 24 DLC gp c 24 AE a RR AA a Re IMT MTN 25 Controlo VOGA U us cat or 25 a a ole UB a VALE Bos a a 7 26 Co trol Unit AGDE e O sia a 26 Chromaticity coordinates CIAGMAMN iss cscsssssssseardscavesanascoartaerasstzsesecesviaveiaccsenatesvasaninanevanieneaviens 27 PhotomnmetriC Sta E RR obe eal ned tas 28 Reg lati NS i crpcecseraaancenretadoasah bed cmd vee e a ete oet eeu E AO 29 Declaration of conformit y er str Di dedi tSp c EO oan 32 NPAT ESI TE ia Pt a SS cl
11. ies have no green magenta deviation NOTE Full adjustment is possible in a range of colour temperatures from 2500K to 5600K From 5600K to 6500K the adjustment is only possible on 1 8 and 1 4 plusgreen 20 7 DMX 512 CONTROL not available on VDC Control Unit THELIGHT lightning fixtures have been designed for a full DMX control from the Spin DMX port located at the back of the VAC AC DC Control Unit Connect the DMX cable coming from your console into the DMX IN male connector located at the back fo the Control Unit Beside the DMX IN there is also a DMX OUT connector to daisychain fixtures Adressing channels Push both and COLOR TEMPERATURE buttons at the same time and then switch on the power button Wait a few seconds for the three digital displays to blink Now you can define the start address To do so just push the or DIMMER buttons to increase or decrease the first fixture address Once you have chosen the desired address number push the GREEN button to save the selection Keep in mind the following points regarding DMX control THELIGHT DMX protocol uses 3 channels per fixture After the DMX address is entered the Control Unit will automatically assign the following two channels If you wish to control several THELIGHT fixtures at the same values you will have to set them to the same address If you wish to control several THELIGHT fixtures independently you will have to offset their address b
12. is compatible with 4LIGHT GLIGHT and ALONG The AC range is 90 to 264 VAC 50 60Hz AC DC Control Unit 2 0 Designed to use either AC or DC power and is compatible with 4LIGHT GLIGHT and ALONG The AC range is 90 to 264 VAC 50 60Hz Either the V lock mounts or optional Gold mounts or the XLR4 receptacle can be used for powering the AC DC by battery When powered through the XLR4 receptacle any battery from 24 to 35 V can be used VDC Control Unit 2 0 Can be powered DC or AC through external power supply accessory ref 180W PSU Exclusively compatible with 4LIGHT NOTE Exclusively compatible with 4LIGHT Either the V lock mount or optional Gold mount or the XLR4 receptacle can be used for powering the VDC by battery When powered through the XLR4 receptacle any battery from 9 to 36 V can be used 1 Connecting the power cable to the VAC AC DC Control Unit Connect the power cable to the plug located in the rear side of the VAC ACDC Control Unit Connect the power plug with a mains power outlet To avoid electric shocks and or damages in the equipment the Danger power switch located at the VAC ACDC Control Unit front panel must be off before connecting or disconnecting cables 2 Connecting batteries on the VDC AC DC Control Units Either the V lock mounts or optional Gold mounts or the XLR4 receptacle can be used for powering the VDC AC DC by battery Relevant information on battery use Use o
13. kmanship and parts in a warranty period of two 2 years from the date of purchase Defects that occur within this warranty period under normal use and care will be repaired or replaced at THELIGHT discretion solely at our option with no charge for parts or labour In the event of the equipment malfunction contact the dealer from which you purchased the product Please note that you will be not be reimbursed for the cost of bringing the equipment to the THELIGHT Repair Centre THELIGHT reserves the right to replace the product or relevant part with the same or equivalent product or part rather than repair it Where a replacement is provided the products or part replaced becomes the property of THELIGHT THELIGHT may replace parts with refurbished parts Replacement of the product or a part does not extend or restart the Warranty period Returns or exchanges from the customers will be accepted within 15 days of delivery and will not include the actual shipping costs Item s must be in original packaging and condition must not be assembled and must include its original user manual This warranty does not cover any damage resulting from Failure to follow the instructions in the instruction manual Repair modification or overhaul not conducted by any authorized THELIGHT personnel Fire natural disaster act of God lightning abnormal voltage etc Submergence in water flooding exposure to alcohol or other beverages infiltration of sand or m
14. l to extract it 17 4 Placing the Control Unit in the stand mast You can place the Control Unit in the stand mast for a handy use close to the lamp head To do so you will need to use a regular Super Clamp not included in the kit and insert the Hexagonal 5 8 16mm baby spud Once installed the hexagonal spud just slide the holder located at the Control Unit bottom over the spud plate until properly seated as shown in the picture 5 Security cables The lamp head is provided with several holes specially design to insert one o more 5mm snaps and their safety cable When the lamp head and any other component is mounted in a N Warning hanging position it must be secured with a safety cable rated at a minimum of ten times the weight of the light fixture including its accessories 18 6 DIGITAL ADJUSTMENTS The Control Unit doubles as power supply and digital remote controller of the following light parameters through its programmed CPU e Calibrated Colour Temperature variation e Stable colour dimming e Green magenta correction Turning the Power On Off Turn on the equipment by switching on the power button The light settings always remain stored when the Control Unit is powered off Both the lamp head and the Control Unit are electrically protected against power failures but to avoid possible electric shocks and or equipment damages make sure the power switch will be off before connecting o
15. nly original chargers Don t short the battery Respect the service and the safety manual of the battery When powering the VDC AC DC through the XLR4 connector check the proper polarity as shown in the picture at the Control Unit bottom To ensure maximum performance of the equipment use only high XLR4 pinout load capacity batteries with a high continuous draw meaning a power connector Discharge Current of at least 9A When operated on batteries the AC DC Control Unit exclusively runs when two Vlock NOTE or Gold Mount batteries are inserted on the mounts 16 3 Connecting Control Unit and lamp head through the extension cable Connect the male connector in the circular receptacle at the Control Unit front panel Verify the correct alignment of the connectors before inserting them Rotate the receptacle locking ring until it clicks into the lock position Connect the same way the female connector located at the other end of the extension cable in the input male plug coming out from the lamp head NOTE The lamp heads can operate with a maximum extension cable length of 10 meters light emitted will always be correct THELIGHT VAC and AC DC Control Units has been designed to supply power to the NOTE ALONG the 4LIGHT or the GLIGHT lamp heads With either of these connected the Disconnecting the extension cable Grab the connector firmly turn the ring to unlock it and pul
16. o these unaccuracy on reading of the light emitted by LED and must not be considered THELIGHT guarantees pure white light and correct colorimetry of the light delivered by its high power LED luminaries which have been calibrated in laboratory according to CIE 13 3 1995 international standards for measurement of the CRI and chromatic coordinates x and CIE 1931 The reliability of this digital equipment is supported by the calibration THELIGHT has made in laboratory by spectrophotometer which precision is half yearly calibrated according to the National Institute of Standards NIST of the United States and of the Physikalisch Technische Bundesanstalt PTB of Germany In order that the advanced THELIGHT luminaries could be used together with other light sources THELIGHT has accurately calibrated both the CCT and the chromatic coordinates to match them with traditional light sources following tungsten and daylight standards The digital Control Unit allows a further and precise green magenta correction NOTE ABOUT 2012 PRODUCTS ELECTRONIC COMPATILITY WITH OLDER VERSIONS N Warnin Every 2012 Control Units are made to be used exclusively with 2012 g ALONG ALIGHT SLIGHT lamp heads Do not connect 2012 or newer Control Units with older versions of 4LONG ALIGHT 6LIGHT lamp heads Do not connect older versions Control Units with with 2012 or newer 4LONG ALIGHT SLIGHT lamp heads You will easily identify the 2012 or newer pr
17. oducts by the blue label fixed in every connector 2e COMPONENTS AND ACCESSORIES Each THELIGHT kit is composed by 1x HIGH POWER LED PANEL Either of the following models 4LONG high power LED panel ref 4LAC 1 4000 99606000000 QGCGGCC 8 QOOQOE LE 6LIGHT high power LED panel ref GLAC 12500 4LIGHT high power LED panel ref 4LDC 7000 1x REMOTE CONTROL UNIT Either of the following models VAC Control Unit 2 0 ref VAC CPU 2 0 Compatible with 4LIGHT SLIGHT and 4LONG Exclusively AC powered AC DC Control Unit ref AC DC CPU Compatible with 4LIGHT GLIGHT and 4LONG Can be powered AC or DC VDC Control Unit 2 0 ref VDC CPU 2 0 Exclusively compatible with 4LIGHT Can be powered DC or AC through external power supply accessory ref 180W PSU lt ESSE O 7 1x MOUNT Either of the following models Quick link swivel ball head with 3 8 10mm pin Quick link ball head with 5 8 16mm female ref GLS ref GLS F e A 6LIGHT 4LIGHT Yoke with 28mm pin ref BLAC 12500 Y eeeeeeen 0000006C 6666666 4LONG Yoke with 28mm pin ref 4LAC 1 4000 Y 2x REMOVABLE BARN DOORS Either of the following models Short panel removable barn doors Long panel removable barn doors ref 45 RB ref 4L RB 1x 2 5 meters power cable ref ACC2 5m 1x 3 5 meters extension cable ref DCC3 5m 2 0 ref ACC2 5m 5 meters extension cable ref DCC5m 2 0 10 me
18. r disconnecting cables In case of extreme over tension when using the VAC Control Unit replace the 5mm 2 5Ah fuses from inside the fuse holder located at the back Danger In case of extreme over AC tension when using the AC DC Control Unit replace the 5mm 2 5Ah fuses from inside the fuse holder located at the back In case of extreme over DC tension when using the AC DC Control Unit replace the 15Ah fuses from inside the fuse holders located at the top In case of extreme over tension when using the VDC Control Unit replace the 15Ah fuse from inside the fuse holder located at the back If a power failure would happen or the cables would be accidentally disconnected the Control Unit would entry on Error mode and the number 8 would show in the digital NOTE display To reset the equipment and resume the light values turn the switch power off connect the cables and switch on the power button COLOR TEMPERATURE Variation Colour temperature can be easily increased or reduced through the buttons located at the Control Unit front panel Above them a digital display indicates at all times the selected colour temperature The value 3 2 corresponds to 3200K and the value 3 3 to 3300K and so on Push the button to increase colour temperature or push the button to decrease it If you keep pushed any of the buttons the you will get a continuous variation Every push on the buttons will increase or decrease the colour
19. r bearing the expenditure incurred thereof The total or partial reproduction of this guide is prohibited without the express written permission of THELIGHT THELIGHT technology is protected under Spanish license laws with international patents pending Information and specifications in this document are subject to change without notice 2012 O Copyright THELIGHT All rights reserved SAFETY PRECAUTIONS Various symbols are used throughout this instruction manual and on the product to prevent physical harm to you or other people and damage to property The symbols and their meanings are explained below N Warning Possible risk of injury or damage to equipment Danaer This symbol indicates the risk of electric shock or fire danger that could g result in injury or damage to equipment This equipment has been checked and meets the requirements of general safety for electronic devices These requirements are specified to provide a reasonable protection against electromagnetic interferences when the equipment is used in commercial environments This equipment generates uses and can emit waves of radio frequenoy and if not properly used following the instructions of this manual can produce interferences in radio communications The use of this equipment in residential areas can produce interference the user will be the only responsible of correcting them CAUTION Though the light generated by LED does not produce any heat for wha
20. s dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K 90 340 x 300 x 70 mm 3 5 kg 110W Nominal 145W Maximum variable from 30 to 125 standard 35 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Philllips high power LED with a selected BIN Fresnel lens CPU control with THELIGHT software quick link swivel ball head adjustable yoke softbox diffuser hilite quarter half and full silent grid cloth options removable barn doors 24 COLOUR TEMPERATURE LIGHT INTENSITY GREEN MAGENTA CORRECTION CHI DIMENSIONS WEIGHT POWER DRAW BEAM ANGLE LED RATED LIFE THELIGHT LED TECHNOLOGY RIGGING OPTIONS ACCESSORIES 4LIGHT adjustable from 2500K a 6500K 100K increments dimmable with minimal colour shift 1 2 stop increments adjustable 1 4 y 1 8 steps from 2500K to 5600K 90 340 x 205 x 70 mm 2 4 kg 100W 28V maximum 108W variable from 30 to 75 standard 35 more than 50 000 hours UME Minimum Emitting Unit made up of 3 Philllips high power LED with a selected BIN Fresnel lens CPU control with THELIGHT software quick link swivel ball head with 10mm pin adjustable yoke quick link swivel ball head with 16mm female softbox diffuser hilite quarter half and full silent grid cloth options removable barn doors waterproof case VDC Control Unit 2 0 DIMENSIONS WEIGHT POWER SUPPLY OUTPUT FREGUENCY FUSE BAT
21. subject to change without notice THELIGHT technology is protected under Spanish license laws with international patents pending THELIGHT luminary for cine and tv S L www thelight com es 28 REGULATIONS This equipment is designed to meet the following regulations and safety standards for battery powered technology equipment ENVINRONMENTAL THELIGHT devices are certified and intended for indoor use lamp head IP21 Control Unit IP41 LAMP HEAD OPERATION TEMPERATURE from 20 to 40 C CONTROL UNIT OPERATION TEMPERATURE from 20 to 50 C OPERATING HUMIDITY from 30 to 9096 RH non condensing FUSE 2x28 5A CE REPORT ELECTROMAGNETIC COMPATIBILITY Tost Laborstory CE mark TESTS AND MEASURES REQUESTED nl Lj E ama a 29 EO telproce Laboratorio de Ensayos marcado CE Tess Laboratory CE mark LEN va s sw mos iii oe omo 4 cante camem AA Om uma www oco 30 3 telpro C Laboratorio de Ensayos marcado CE Test Laboratory CE mart 4e Cote o0 SE Rat Cage cakes O sm m 31 DECLARATION OF CONFORMITY TO EMC DIRECTIVE 2004 108 EC MANUFACTURER S NAME Thelight luminary for cine and tv S L MANUFACTURER S ADDRESS Plaza Val 1 22148 Colungo HUESCA SPAIN info gthelight com es www thelight com es declares that the products MODELS 4LIGHT LED panel 6LIGHT LED panel 4LONG LED panel VDC Control Unit VAC Control Unit AC DC Control
22. t his use turns out to be very comfortable for the actors the lamp head acts as a heat sink through its back part Surface can reach a temperature between the 50 C and the 80 C Please use protective gloves if you touch the lamp head at the heat sink Do not attempt to open any of the device or component housings To reduce the risk of electric shock do not remove lamp head or Control Unit cover No user serviceable parts inside Maintenance and repair work to be carried out only by THELIGHT Service Centre AN Danger Do not cover the aluminium lamp head heat sink while using it Proper ventilation must be provided Avoid exposing the lamp head to the heat radiation of other light fixtures The lamp head is equipped with high power LED Due to their high light output intensity don t stare directly into the light source In order to protect against risk of electric shock the installation should be Warning properly grounded Defeating the purpose of the grounding type plug will expose you to the risk of electric shock Marking Ce TABLE OF CONTENTS alega jo eir SIRE RO RR 3 Safety precautions ninaa A A AR e 4 Table of contenta O Eo fec e a naaa EEEE nenten eap 5 T Main features azana ERE Roter tee nti bu E EI Holt 6 2 Components and aecessoOFles on coo aree d nn vei Rn ER nu cT RH DRY 7 93 NAMES and Pais guris ed xta A Orr Ctt 11 4 Placing into operation tenente terere nte 15 5 Power ConhnecLliOrl
23. ters extension cable ref DCC10m 2 0 c 1x Hexagonal 5 8 16mm baby spud 1x 4LIGHT Softbox diffuser quarter kit ref HS ref 4LDC 7000 SF 1x 6LIGHT Softbox diffuser quarter kit ref SLAC 12500 SF 1x ALONG Softbox diffuser quarter kit ref ALAC 14000 SF O KKK 10 3 NAMES AND PARTS 4LIGHT high power LED panel Rear view rivets for swivel ball head mount input cable and connector 6LIGHT high power LED panel Rear view rivets for swivel ball head mount input cable and connector 4LONG high power LED panel Rear view rivets for swivel ball head mount input cable and connector 11 VAC Control Unit 2 0 Front view Rear view ONOoRWNMS gt LE 2 3 4 COLOR TEMPERATURE Power switch Colour temperature digital display Intensity level digital display Green magenta offset status LED Power output female connector Colour temperature adjustment buttons Intensity adjustment buttons Green magenta adjustment button XLR DMX input XLR DMX output Mains power input Fuse receptacle 2 x 2 54 12 AC DC Control Unit 2 0 Top view vi 9 E Oo v m i on n e E E E 1 2 3 2 1 1 Vlock battery mounts Gold mounts optional 2 DC fuse receptacles 1x 15A on each one 3 XLR4 DC input 24 35VDC Rear view 1 XLR DMX input 2 Mains power input with fuse receptacle 2 x 2 94 3 XLR DMX output 13 VDC Control Unit 2 0 Front view
24. ty files to install into Avolites consoles from consoles a i www avolitesdownload com PersonalityLibrary mainPage Main asp amp 1D 3516 21 8 MECHANICAL ADJUSTMENTS Beam angle variation Hold the lamp head from the outer segments and bend it in or out to the wanted concave or convex shape Choose the light beam angle you need and the lamp head will remain at the chosen setting When the lamp head is positioned at standard flat setting the light beam angle is 35 The maximum light beam angle is given when the lamp head is bend at its more convex setting head segment grooves Then insert one end of the axle into the hole located at the lamp head exterior segment as shown in the picture The right mounting position is achieved when the product name is visible facing outwards Insert the other barn door axle end into the opposite hole located at the lamp head exterior segment E E E E 8 gt 8 8 Se 22 Softbox diffuser installation Position the lamp head in its standard flat setting Align the side wings captive screws with their respective threaded inserts located on the lamp head Screw the captive screws to attach the two side wings to the lamp head Ss e h T o qui E Set the barn doors open as shown in the picture Wrap the Softbox cloth around the side wings and barn doors Put Wy 090000000 00000000 00000006 A AN I
25. ud physical shock or dropping of the equipment and other unnatural causes This warranty only applies to the lamp head and the Control Unit and not to the accessories such as the diffuser or barn doors nor does it apply to the fuses and other consumables provided Any consequential damages arising from failure of the equipment such as expenses incurred in taking pictures or recording images or loss of expected profit will not be reimbursed whether they occur during the warranty period or not Parts essential to the servicing of the light equipment that is components required to maintain the functions and quality of the fixture will be available for a period of five years after the product is discontinued THELIGHT Luminary for cine and tv S L www thelight com es The total or partial reproduction of this guide is prohibited without the express written permission of THELIGHT THELIGHT technology is protected under Spanish license laws with international patents pending Information and specifications in this document are subject to change without notice 2012 Copyright THELIGHT All rights reserved 33 XHXe XL CL GHD THEUGHT Luminary for cine and TV S L www thelight com es 2012 O Copyright THELIGHT All rights reserved 34
26. y 3 channels Example fixture1 address 001 fixture2 address 004 fixture3 address 007 DMX Channels When you connect your console to the Control Unit you will be able to control THELIGHT fixtures through 3 channels Channel 1 start address COLOUR TEMPERATURE From 2 5 to 6 5 from 2500Kelvin to 6500Kelvin Fader at O 2 5 means 2500Kelvin Fader at 100 6 5 means 6500Kelvin Channel 2 start address 1 DIMMER Channel 3 start address 2 GREEN MAGENTA correction fader at 0 1 4 Green fader at 25 1 8 Green fader at 50 standard position green magenta at 0 fader at 7596 1 8 Green fader at 10096 1 4 Green Do not use microphone cables or other general purpose two core cables designed for audio or signal use They are not suitable for DMX 512 Problems due to wrong cabling NOTE May not be immediately perceptible Microphone cables may appear to work fine but systems built with such cables may fail or be susceptible to random errors Cable must comply with RS 485 DMX protocol EIA485 A DMX terminator should be plugged into the final empty OUT connector of the last slave on the daisy chain NOTE A terminator is a stand alone male connector with a built in 120 resistor matching the cable characteristic impedance connected across the primary data signal pair THELIGHT luminaries DMX working personality can be configured to be NOTE for Avolites recognised by Avolites consoles Download the personali
Download Pdf Manuals
Related Search