user manual Washing Machine
Contents
1. 4 electrolux Personalisation Child safety This option provides two types of locking e if the option is activated after the cycle has star ted no changes to the options or programme is possible The cycle runs and you must deactivate the op tion to run a new cycle e if the option is activated before the cycle has started the appliance cannot be started To activate child safety turn appliance on and press Rinse plus 5 and Delay start simul taneously until the confirmation symbol amp shows on in the display The appliance memorises the selection of this option To deactivate child safety repeat the process Audible signal When the audible signal is activated it sounds when a button is pressed at the end of the pro gramme to indicate a fault To deactivate turn appliance on and press Pre wash LL and Rinse plus simultaneously until the beep sounds The signal is only active if alarm sounds To reactivate it repeat the same process Using for the first time i e Ensure the electrical and water connec tions comply with the installation instruc tions e Remove the polystyrene insert and all other items inside the drum Daily use _ Loading washing e Open the lid of the appliance Open the drum by depressing the locking button A The two shutters unlock automati cally e Load the washing close the drum and the lid of your washing machine Wa2. Start Pause push button flashes red The EFO error code ap the drainage filter is obstructed pears in the display and the anti flooding security system has been activated please proceed as the Start Pause push follows button flashes red2 close the water inlet tap empty the appliance for 2 minutes before unplugging call the after sales service The drainage pump runs the anti flooding security system has been activated please proceed as constantly even when follows the appliance is inactive close the water inlet tap empty the appliance for 2 minutes before unplugging call the after sales service e you have gone past the MAX indicator Softener runs directly into the drum when filling the dispenser box 1 On some models the auditable signals can sound 2 After solving any problems press Start Pause pushbutton to restart the interrupted programme Detergents and Additives Only use detergents and additives designed for be used when a prewash has been selected For use in a washing machine We do not recommend mixing different types of detergents This may spoil the washing There are no restrictions on the use of powder detergents Liquid detergents must not Technical Specifications cycles without prewash they must be added via means of a dosing ball Detergent tablets or doses must be placed in the detergent compartment of your appliance s dispenser box D
3. This washing machine must only be connected in single phased 230 V Check the fuse size 13 A for 230 V The appliance must not be connected with an extension lead or multi plug adaptor Ensure that the plug is earthed and that it is in accordance with current regulations Positioning Position the appliance on a flat and hard surface in a ventilated location Ensure the appliance does not come into contact with the wall or other furni ture To move your appliance proceed as follows Place it on its rollers by pulling the lever located at the base of the appli ance hard from right to left Once the appliance is in the desired posi tion push the lever back to its original position Accurate levelling avoids vibrations noise and prevents the appli ance from moving when running Environment Disposing of the appliance All materials carrying the Oo symbol are re cyclable Dispose of them at a waste collec ion site enquire at your local council for collection and recycling When disposing of your appliance remove all parts which could be dangerous to oth ers cut off the power supply cable at the base of he appliance The symbol t on the product or on its packaging indicates that this product may not be treated as household waste Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring his product
4. is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could oth erwise be caused by inappropriate waste handling electrolux 11 of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product Protecting the environment ws To save water and energy and therefore help protect the environment we recommend the following e Whenever possible use the appliance at full ca pacity and avoid partial loads Only use the prewash and soak programmes for heavily soiled items e Use an appropriate amount of detergent for the hardness of the water the size of the load and how soiled the washing is www electrolux com For more information please visit www electrolux com ANC 108 5123 00 51 09
5. IMENSIONS Height Width Depth LINE VOLTAGE FREQUENCY POWER CONSUMPTION WATER PRESSURE Minimum Maximum Connection to water supply CE Installation 850 mm 400 mm 600 mm 230 V 50 Hz 2300 W 0 05 MPa 0 5 bar 0 8 MPa 8 bar Type 20 27 Remove all protective packaging for transit before using for the first time Keep in case needed for future transit Transporting a non secured appli ance may damage internal components and cause leakages and malfunctions The appliance can al so be damaged through physical contact 10 electrolux Unpacking To install your washing machine at the same level as surrounding furniture proceed as shown on picture 4 Water supply Install the supplied water inlet hose at the rear of your washing machine by proceeding as follows Do not reuse an old hose The water inlet hose can not be extended If it is too short please contact the after sales service Open the water inlet tap Check there are no leaks Drainage Fit the U piece on the drainage hose Place everything in a drainage point or in a sink at a height of between 70 and 100 cm Ensure it is positioned securely Air must be able to enter the end of the hose to avoid any risk of siphon ing The drain hose must never be stretched If it is too short contact an engineer Electrical connection
6. Thinking of yor_ user manual O Electrolux Washing Machine EWT 136580 W 2 electrolux The control panel Lid button Filter access cover Adjustable levelling feet FoON gt g aa The control panel i amp ron ed Programme selector Display Pushbuttons and their functions Start Pause pushbutton Time manager pushbuttons OP oN S The symbols Spin speed Options Delay start Child safety Door lock p Kee 1 Ll AQT E W UW es bys Clg lt a Length of cycle or Timer delay countdown Time manager 68 1880 e OB 8 T Animated clock cycle in progress J I bki 1 0 Cycle running LU Prewash UIJ wasn I Rinse or Steam cycle by Drain Spin 1 Temperature i a OODNOAIRWN Dispenser box oe LLJ Prewash UIJ Wash electrolux 3 Softener do not fill above the MAX symbol M and using your appliance Keep this user manual with your appliance General safety e Do not modify or attempt to modify this appli ance This would put yourself in danger e Ensure that all coins safety pins brooches screws etc have been removed before starting a washing programme If left in washing they can seriously damage the appliance e Use the recommended quantity of detergent e Put small items together socks belts etc ina small linen bag or pillow case e Unplug and close inlet hose tap after using ap pliance e Always disconn
7. Wool cold 40 Machine washable 1 0 kg Rinse hold Night cycle plus Delay wool carrying the labels pure new wool ma Start chine washable does not shrink E Rinse Hand washed items can be rinsed 6 0 kg Rinse hold Night cycle plus Rinse in this programme plus Delay start tt Drain Runs an empty cycle after a Rinse 6 0 kg hold or Night cycle plus Spin A spin cycle from 700 to 1300rpm 8 0 kg Delay start after a Rinse hold or Night cycle plus SX Eco 40 90 White or colour e g 8 0 kg Rinse hold Night cycle plus Prewash normally soiled work clothes bed linen table Rinse plus Delay start linen body linen towels Blanket 30 40 For washing duvets 2 5 kg Delay start or quilted fabrics Shirts 30 For washing 5 slightly soiled 92 5 kg Delay start shirts amp Easy iron cold 60 For washing cot 1 0 kg Rinse hold Prewash Rinse plus Delay tons and synthetics Reduces creasing and start makes ironing easier amp Steam Cottons For cottons De wrin 1 0 kg kles the laundry and makes ironing easier A Steam Synthetics For synthetics 1 0 kg wool or silk De wrinkles the laundry and makes ironing easier electrolux 7 Programme Type of washing Possible options XX Steam Refresh For every types of fab 1 0 kg ric Remove the smells of dry cleaning cam phor perfume Reduce the smells of smoke Can not remove animals smells 1 Reference programme
8. d disconnect the inlet hose e Place the end of this hose and the drain hose in a basin on the floor Select the Drain programme let it run until the end of the cycle Disconnect the appliance from the power supply by turning the programme selector to Stop e Unplug the appliance e Replace the inlet hose and drain hose This way the water remaining in the hoses will be drained away avoiding any ice formation which would damage your appliance Before turning your appliance on again ensure that it is installed in an area where the temperature will not fall below freezing Use e Your appliance is intended for normal domestic use Do not use the appliance for commercial or industrial purposes or for any other purpose Refer to the instructions on the label of each item before washing Do not put items into the washing machine which have had stains removed with petrol al cohol trichlorethylen etc If such stain removers have been used wait until the product has evaporated before putting these items into the drum e Empty pockets and unfold items This appliance is not intended for use by per sons including children with reduced physical sensory or mental capabilities or lack of expe rience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play with the appliance
9. d the washing ma chine Wash is unsatisfactory The appliance vibrates is noisy The wash cycle is much too long The washing machine stops during a wash cy cle The lid doesn t open at the end of the cycle The E40 error code ap pears in the display and the Start Pause push button flashes red 2 The E20 error code ap pears in the display land the Start Pause push button flashes red2 e the appliance isn t plugged in correctly the electrical installation isn t working there is a power failure the lid of your appliance and the drum shutters aren t closed firmly the programme start command hasn t been properly selected the water supply has been cut off the water inlet tap is closed the water inlet filters are dirty a red tab appears on the water inlet hose e the drainage U piece is fixed too low see installation section e the drain hose is blocked or bent the drainage filter is obstructed e the out of balance detector has been activated washing is unevenly distributed in the drum the Drain programme or Night Silence Plus or Rinse hold option have been selected the height of the drainage U piece is unsuitable too much detergent has caused foam to overflow the detergent is unsuitable for machine washing the drainage U piece isn t attached correctly the drainage filter hasn t been put back in place the water inlet hose is leaki
10. ect the power supply from the appliance before cleaning or maintenance e Do not machine wash clothes with ribbing un inished or torn material Installation e Unpack or ask for the appliance to be unpacked immediately upon delivery Check the outside of he appliance is not damaged in any way Report all transit damage to your retailer e Remove all transit bolts and packaging before installing the appliance e Connection to the water supply must be carried out by a qualified plumber e f your domestic electrical circuit needs adapting o allow the appliance to be plugged in use a qualified electrician e Ensure that after installation the power cable is not trapped under the appliance e f the appliance is installed on carpeted floor ensure that the carpet does not obstruct any ventilation ducts located at the base of the ap pliance e The appliance must be equipped with an earth ed power plug which conforms to regulations e Before connecting your appliance to the power supply carefully read the instructions in the chapter entitled Electrical connection e Replacing the power cable should only be car ried out by an authorised service engineer e The manufacturer cannot be held responsible for any damage resulting from incorrect installa tion Precautions to be taken against frost If your appliance is exposed to temperatures below 0 C the following precautions must be taken e Close the tap an
11. for test confirming to CEI 456 standard 45 L 1 02 kWh 175 min 2 To use on dried laundry without detergent At the end of a steam cycle the laundry feels humid It is recommended to take out your clothes from the drum quickly and to wait 10 minutes before to wear them The steam cycles do not eliminate the micro organisms Care and cleaning Unplug the appliance before cleaning Descaling the appliance To descale the appliance use an appropriate non corrosive product designed for washing machines Read product label for recommended amounts and how often descaling should be carried out The exterior Use warm soapy water to clean the exterior of the appliance Never use alcohol solvents or similar products Dispenser box To clean proceed as fol Drainage filter Clean the filter located at the base of the appliance regularly Water inlet filters To clean proceed as follows Numerous checks were carried out on your appli ance before it left the factory However should you notice a malfunction please refer to the sections below before contacting the after sales service 8 electrolux Problems Causes The washing machine doesn t start or doesn t fill The appliance fills but empties straight away The washing machine doesn t rinse or doesn t empty You have found water aroun
12. freshing a very fresh few items only 1 To use on a half load 2 The symbol flashes and disappears this wash cycle is a refresh cycle only The availability of these different levels varies de pending on the selected programme type Start of the programme Press the Start Pause pushbutton to start the cycle the corresponding light will come on green and the symbol appears on the display door locked It is normal for the programme selector to remain stationary during the cycle The symbol for the cur rent cycle and the remaining time appear on the display If a delayed start has been selected the countdown appears on the display Warming up During the cycle the 4 symbol comes on when the appliance is reaching the right temperature Interrupting a programme Adding washing during the first 10 minutes Press the Start Pause pushbutton the corre sponding light will flash green while the appliance is paused The lid can only be opened around 2 minutes after the washing machine has come to a stop The symbol i disappears Press the Start Pause pushbutton again to continue the programme Modifying the programme in progress Before making any changes to the current pro gramme you need to pause the washing machine by pressing the Start Pause pushbutton If the modification is not possible Err flashes in the display and the Start Pause pushbutton flashes red for a few second
13. h programme by 30 60 90 2 hours to 20 hours he selected time appears on the display for a few seconds You can change or cancel the delayed start time at any time before you press the Start Pause pushbutton by pressing the Delay start pushbutton again 0 indicates immediate start If you have already pressed the Start Pause pushbutton and you want to change or cancel the delayed start proceed as follows e To cancel the delayed start and start the cycle immediately press Start Pause and then De lay start Press Start Pause to start the cycle e To change the timer delay period you must go through the Stop O position and reprog ramme your cycle The lid will be locked during the delayed start time If you need to open it you must first pause the ap pliance by pressing the Start Pause pushbutton After closing the lid again press the Start Pause pushbutton Time Manager The cycle can be made longer or shorter by using the Time Manager Gi pushbuttons The level of soiling of the laundry is also indicated Intensive For heavy soiled items Normal Sj For normal soiled items electrolux 5 Daily eS For daily soiled items Light eS For slightly soiled items Quick a For very slightly soiled items Super quick 47 For items used or worn for a short time Refresh 72 For refreshing items only Super re 72 For re
14. ng the detergent is unsuitable for machine washing there is too much washing in the drum the wash cycle is unsuitable there isn t enough detergent all packaging have not been removed from the appliance see installation section the appliance isn t level and is unbalanced the appliance is too close to the wall or furniture washing is unevenly distributed in the drum the load is too small the water inlet filters are dirty the power or water supply has been cut off the motor overheating detector has been activated the water inlet temperature is lower than usual the foam detection security system has been activated too much de tergent and the washing machine has begun draining the foam the out of balance detector has been activated an extra phase has been added to distribute washing more evenly in the drum e the water or electricity supply is defective e a Rinse hold has been selected e the drum shutters are open e the temperature inside the drum is too high e the lid unlocks 1 2 minutes after the end of the cycle e the lid is not closed properly the drainage filter is obstructed the drain hose is blocked or bent the drain hose is fixed to high See Installation section the drainage pump is blocked the standpipes blocked electrolux 9 P problems O Causes The E10 error code ap the water tap is closed pears in the display and the water supply has been cut off the
15. rning Before closing the lid of your appliance ensure that the drum is properly closed e When the two shutters are closed e locking button A released Proportioning of detergents Pour the amount of washing powder into the washing LIL and prewash LIJ compartments if you have selected the prewash option Pour fabric softener into the compartment if necessary Selection of desired programme Turn the programme selector to the required pro gramme The Start Pause pushbutton flashes green If you turn the programme selector to another pro gramme while a cycle is in progress the appliance will ignore the new selected programme Err 1 Depending on model e Run an initial wash cycle at 90 C without any washing but with detergent to clean the water tank flashes and the Start Pause pushbutton flashes red for a few seconds Selecting the temperature Press the Temperature y pushbutton repeatedly to increase or decrease the temperature if you want your washing to be washed at a different temperature to the one selected by the appliance see Programmes table The n symbol means a cold wash Selecting the spin speed Press the Spin pushbutton to change the spin speed if you want your washing to be spun at a different speed to the one selected by the appli ance can also select No spin G Rinse hold E or Night cycle plus 9 The maximum spin
16. s If you still decide to change the programme you must cancel the current pro gramme see below Cancelling the programme If you want to cancel the programme turn the pro gramme selector to the Stop position 6 electrolux End of the programme Stand by once the programme has finished after The washing machine stops automatically the a few minutes the energy saving system will be Start Pause pushbutton goes out and 0 flashes enabled The brightness of the display IS reduced on the display The lid can only be opened around By pressing any button the appliance will come out 2 minutes after the washing machine has come to Of the energy saving status a stop The symbol I disappears Turn the programme selector to the Stop O position Re move washing Unplug and close water inlet tap Programmes table Programme Type of washing Possible options amp Cottons cold 90 White or colour 6 0 kg Rinse hold Night cycle plus Prewash e g normally soiled work clothes bed linen Rinse plus Time manager Delay start table linen body linen towels Z Synthetics cold 60 Synthetic fab 2 5 kg Rinse hold Night cycle plus Prewash rics body linen fab coloured farics non iron Rinse plus Time manager Delay start shirts blouses J Delicates cold 40 For all delicate 2 5 kg Rinse hold Night cycle plus Prewash materials for example curtains Rinse plus Time manager Delay start
17. speeds are for Cottons Eco 1300 rpm for Wool 1000 rpm for Synthetics Shirts Easy iron 900 rpm for Del icates Blanket 700 rpm At the end of the programme if you have selected Rinse hold SJ or Night cycle plus rr you then need to select a Spin or Drain by pro gramme to finish the cycle and empty the water Selecting options You must select the different options after select ing the programme and before pressing the Start Pause pushbutton see Programme table Press the desired button s the corresponding symbols appear on the display If pressed again the symbols disappear If one of the options is not compatible with the selected programme Err flashes on the display and the Start Pause push button flashes red Prewash option LU The appliance runs a prewash at 30 C max Rinse plus option The washing machine will add one or more rinses during the cycle This option is recommended for people with sensitive skin and in soft water areas Temporary Press the Rinse plus J pushbut ton The option is only active for the selected pro gramme Permanent Hold down the Prewash LU and Delay Start pushbuttons for a few seconds The option is permanently activated even if the appliance is switched off To deactivate it repeat the process Delay start This option allows you to delay the start of a was
Download Pdf Manuals
Related Search