AF-310 - Air Conditioner Home
Contents
1. MED speed 5 sec LOW speed 5 sec f stop 5 sec The unit will operate in this cycle until the power is turned off LOW Speed NATURE Mode 1 Press the NATURE button when the SPEED mode is set to LOW wind speed This will program the unit to work in NATURE mode with LOW wind speed At this time both the LOW and NATURE indicators will turn on The wind speed will automatically change according to this schedule MED speed 5 sec P LOW speed 15 sec MED speed 5 sec LOW 15sec f stop 5 sec MED speed 5 sec LOW speed 10sec MED speed 5 sec LOW 10 sec F stop5sec MED speed 5 sec F LOW speed 20 sec stop 5 sec The unit will operate in this cycle until the power is turned off SPEED Button 1 When the POWER button is pressed the HIGH speed indicator will turn on and the unit will operate on the strongest wind setting 2 Press the SPEED button once again At this time the MED speed indicator will turn on and the unit will operate on the medium wind setting 3 Press the SPEED button once more The LOW speed indicator will turn on and the unit will operate on the lowest wind setting SWING Button 1 Press the SWING button At this time the indicators will turn on and the louvers will swing covers 60 degrees horizontally 2 Press the SWING button again to stop the unit at is desired position The indicator will turn off at this time TIMER Button 1 Press the TIMER button to set the timer Every press will a2. When not in use disconnect the plug from the power outlet When disconnecting the plug from the outlet grasp the plug and not the main power cord Be sure to drain the water out of the tank when not in use for a prolonged period of time 4 Do not disassemble or alter the unit J Do not use the unit in areas with extremely high or low temperatures exceeding 50 C or below 0 C or where it may be exposed to direct sunlight 6 To prevent water from splashing out of the tank use care when moving the unit if it is full 7 Do not operate the unit near flammable liquids or in potentially dangerous locations 8 Do not put heavy objects on the unit as this may cause damages or unit malfunction 9 This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning its use by a person responsible for their safety 10 Children should be supervised to ensure they do not play with the appliance 11 Before filling the unit with water make sure the unit is switched off and unplugged from the power outlet Also make sure the water level is below the MAX line indicator 12 Switch the unit off and unplug it before cleaning it or performing any maintenance 13 Because this appliance adds moisture to the air to avoid excessive humidity do not use it for an extended period of time in small
3. AF 310 Evaporative Cooling Fan With Remote Control Please read and save these instructions General Safety Information Read and save these instructions for future reference Carefully read these instructions before attempting to assemble install operate or maintain this unit 2 Protect yourself and others by observing all safety precautions 3 Failure to comply with these instructions could result in personal injury and or property damage 4 This product is for household use only and is not intended to be used in commercial or industrial environments Features Works as an air cooler air cleaner and humidifier Boasts germ free water pump circle system Cloth curtain materials produce moisturized cool air Variable air speeds for custom controlled comfort 60 degree horizontal air flow with automatic oscillation for greater air distribution Wide range timer 0 5 to 7 5 hours Full function remote control Includes LED indicator lights and low water alert lonizer eliminates airborne pollutants Safety Instructions 1 Make sure the power source conforms to the electrical requirements of this unit AC120V 60HZ 2 Do not operate this appliance if it has a damaged cord or plug If the power cord or plug is damaged it must be replaced by the manufacturer or an authorized service facility in order to reduce the risk of fire 3
4. UTTON D TIMER BUTTON Figure 2 Before Operating the Unit 1 Pull out the water tank and fill it with water before operating the fan see Figure 3 Do not pour water above 40 C into the water tank 2 For enhanced cooling ice can be added to the ice box located within the base of the water tank see Figure 4 as o oe E j ICE ie i water TA WW in ICE box Dray D et mater tank out Water tany Figure 3 Figure 4 Please Note 1 Do not place the ice box into the water tank when the water tank is full Doing so can cause water to overflow of the unit 2 Freeze the ice box each time before placing it in the water tank 3 The ice box is permanently sealed Do not open the ice box or try to put the cooling gel directly into the water tank This can cause damage to the water pump 4 The gel within the ice box is non toxic Operating Instructions SWING BUTTON SPEED INDICATOR MODE INDICATOR a IR RECEIVER ION INDICATOR ke ION BUTTON COOL INDICATOR OSS wines COOL BUTTON TIMER BUTTON MODE BUTTON 7 POWER INDICATOR SPEED BUTTON POWER BUTTON Figure5 POWER Button 1 Connect the plug into the power outlet A beeping sound will be heard once the plug is plugged in 2 Pr
5. dd another 30 minutes of operating time with a maximum of up to 7 5 hours The programmed time will be indicated on the display 2 To stop the timer press the TIMER button 16 times one more press after reaching 7 5 hours The TIMER indicator will turn off COOL Button 1 Press the COOL button If the tank is filled to a sufficient level the COOL indicator will turn on and the pump will begin to work 2 After about 3 minutes the unit will provide cool humidified air 3 Press the COOL button again to shut off the pump The COOL indicator will turn off and the unit will produce fresh dry air Please Note 1 If the COOL button is pressed when there is insufficient water in the tank an alarm will sound after 90 seconds The COOL indicator will continue to flash for 10 seconds After 10 seconds the alarm will stop and the COOL indicator will also turn off 2 The unit can also be used without water In this case it will operate as a normal electric 7 fan If this is desired make sure the COOL button is in OFF mode ION Button Press the ION button The ION indicator will turn on and the ionizer will start to work A stream of ions will be produced with the cool air Air Direction Lever Adjust the direction of the inside wind bar by turning the lever You will also be able to adjust the air to flow vertically in an up down direction Technical Specifications Rated Rated Rated Water Water Dimensions Tank N W V
6. e SPEED mode is set to LOW This will program the unit to work in SLEEP mode with LOW wind speed At this time both the LOW and SLEEP indicators will turn on The unit will operate on LOW wind speed every 10 seconds and stop 5 seconds while alternating every 15 seconds until the power turns off Please Note To avoid overcooling do not adjust the direction of the air directly onto people or objects HIGH Speed NATURE Mode 1 Press the NATURE button when the SPEED mode is set to HIGH This will program the unit to work in NATURE mode with HIGH wind speed At this time both the HIGH and NATURE indicators will turn on The wind speed will automatically change according to this schedule HIGH speed 5 sec f LOW speed 5 sec F MEDspeed5sec stop5sec MED speed 10 sec HIGH speed 10 sec F MED speed 5 sec F LOW speed 5 sec f stop 5 sec MED speed 5 sec HIGH speed 5 sec LOW speed 5 sec stop 5 sec The unit will operate in this cycle until the power is turned off MED Speed NATURE Mode 1 Press the NATURE button when the SPEED mode is set to MED wind speed This will program the unit to work in NATURE mode with MED wind speed At this time both the MED and NATURE indicators will turn on The wind speed will automatically change according to this schedule MED speed 5 sec LOW speed 5 sec MED speed 5 sec LOW 5 sec stop sec MED speed 10sec LOW speed 10sec MED speed 5 sec LOW 5 sec f stop5sec
7. enclosed areas 2 14 Change the water frequently in order to keep it clean 15 This unit must be operated in an upright position and on a flat level surface 16 Do not operate the unit in wet or damp locations 17 Do not install the unit in a small confined space such as a closet or cabinet 18 DISPOSAL Do not dispose of this product as unsorted municipal waste It R may be necessary to have it collected separately for special treatment az Please Note 1 This unit should not be repaired or serviced by anyone except a specialized technician 2 Ifthe unit tips over immediately pull the plug from the power outlet and then take the unit to an authorized service agency or specialized technician for repairs 3 To reduce the risk of fire or electric shock do not use this fan with any Solid State speed control device List of Parts Front Rear Control panel Display Wind bar bracket Grille Front housing Power cord and plug Water tank Base Water level indicator Wind bar Rear housing Top cover Remote control Rear filter Ser Ar fa iP Oo Figure1 3 Using the Remote Control Use the remote control within 19 feet 6 meters from the unit If the remote control does not work from a short distance away try replacing the batteries Do not allow children to play with the remote control A MODE BUTTON E ION BUTTON B POWER BUTTON F SWING BUTTON C COOL BUTTON G SPEED B
8. ess the POWER button The FAN indicator and HIGH speed indicator will turn on and beep The unit will operate on the strongest air setting in normal mode 3 Press the POWER button again to shut off the unit MODE Button 1 Press the MODE button At this time the NATURE indicator will turn on Press the POWER button 2 times to set the unit to SLEEP mode To return to normal mode press the POWER button 3 times For HIGH Speed SLEEP Mode 1 On the HIGH speed mode press the SLEEP mode button 2 Press the SLEEP button when the SPEED mode is to set SLEEP mode with HIGH wind speed At this time both the HIGH and SLEEP indicators will turn on The wind speed will then automatically change as follows e First 0 5 Hour The unit will alternate on HIGH and MED wind speed every 10 seconds e Second 0 5 Hour The unit will switch to the MED wind speed setting e After 1 Hour Until Shut Off The unit will switch to the LOW wind speed setting For MED Speed SLEEP Mode 1 Press the SLEEP button when the SPEED mode is set to MED This will program the unit to work in SLEEP mode with MED wind speed At this time both the MED and SLEEP indicators will turn on The wind speed will automatically change as follows e First 0 5 Hour The unit will alternate on MED and LOW wind speeds every 10 seconds e After 0 5 Hour Until Shut Off The unit will operate on LOW wind speed LOW Speed SLEEP Mode 1 Press the SLEEP button when th
9. nit not pressed off Some parts may be Take the unit to an authorized service agency or technician for repairs Foreign objects are Take off the side cover board then net stuck inside the unit Remove any foreign objects The motor is defective Take the unit to an authorized service The air wheel is loose agency or technician for repairs There is insufficient water The pump is out of order The water pipe has come off There is no The swing motor is Take the unit to an authorized service swing defective agency or technician for repairs The unit cannot be turned off The unit makes a lot of noise Add water to the tank Take the unit to an authorized service agency or technician for repairs The fan doesn t humidify
10. oltage Frequency Power Consumption Capaci mm 120 V 80W 0 2 0 25L h 308X292X906 5 1kg Cleaning and Maintenance IMPORTANT Disconnect the plug from the power outlet before cleaning or maintaining this appliance Clean the outside housing with a moist damp cloth From time to time depending on the nature of your water supply you may need to clean the inside of the water tank by following these steps 1 Fill the water tank with 1 cup 8 oz of undiluted white vinegar 2 Let the solution sit for 20 minutes 3 With the vinegar in the water tank clean all or interior surfaces with a soft cloth or use a brush to remove build up 4 Rinse the water tank thoroughly with clean water to remove any residual build up or solution Cleaning the Filter refer to the figure below then follow the steps To keep your evaporative fan working efficiently clean the filter system once every two weeks Remove the back cover and dust filter from the unit Remove the cooling pad from the unit Rinse the filter net and cooling pad with water and then dry them in direct sunlight ne B Replace the filter and cooling pad Troubleshooting Possible Reasons The unit There is no power Connect the main lead and then press the produces Some parts are damaged POWER button l oair Take the unit to an authorized service l agency or technician for repairs The POWER button was Press the POWER button to turn the u
Download Pdf Manuals
Related Search