SwyxExpress X20
Contents
1. 1 Restart the computer The startup screen will appear 2 Choose Backup and Restore and confirm your selection with Enter When backing up you can choose from the following options 1 Create local Backup The SwyxWare installation is saved on the hard disk 3 Create Backup and copy to USB media The SwyxWare installation is saved on the hard disk anda copy of the backup file is transferred to an external USB storage device 5 Create Backup and copy to Network share The SwyxWare installation is saved on the hard disk anda copy of the backup file is transferred to a shared network directory 0 Cancel The computer is restarted 3 Press the corresponding number key to select the option you want and confirm with Enter 4 Connect the USB storage device to a USB port on the computer if you have selected option 3 5 Press y if you want an automatic restart of the computer after the backup is completed 6 If there is already a previous local backup you will be asked whether you want to overwrite this backup e If you want to overwrite the existing local backup the current state of the Windows partition is saved e If you want to preserve the local backup the backup gt SwyxExpress Backup and Restore 21 operation is cancelled 7 Ifyou selected option 5 you will be asked for the computer name share name and the network login username and password Enter the necessary information domain name FQD2. e Ifthe backup is preserved the original delivery state is likewise restored so that it is necessary to begin with the 24 gt SwyxExpress Backup and Restore startup of the Windows operating system However you can restore the old status at any time from the backup 5 Press y if you want an automatic restart of the computer after the recovery is completed 6 Enter the password ippbx to start the process and confirm with Enter All the configuration and user data of the system will be lost in this process The restore is begun The message Process complete will subsequently appear 7 Ifyou did not select automatic restart of the computer Step 5 press Enter to restart the computer The Windows operating system has been reset to the delivery state Index A Administration Desktop link 9 B Backup 17 C Configuration Server Further settings 14 Necessary settings 14 SwyxWare 13 Configurations Wizard Server 13 Configuring a trunk 14 D DECT 15 Deletion of the backup Password 23 Delivery status 23 Desktop links 9 Devices Power supply on internal bus 11 E E mail transmission 15 Enter public numbers 14 F Faxmail 15 Feed module 11 G Group All 15 Sales 15 25 Support 15 H Hardware additional 15 l Installation Initial 13 Overview 4 IP telephone 15 ISDN Card Software 11 ISDN trunk 14 L License Permanent 16 Request 16 Windows 7 Licensing 16 M Mail server 15
3. including various models of the SwyxPhone range as desk telephones or the connection of DECT devices via SwyxDECT 800 For further information please refer to the SwyxWare Administrator documentation 16 gt Licensing 6 Licensing 6 1 Windows License The Windows operating system license was already input during the initial startup Please note that you have to activate the system at Microsoft within A the following 3 days Please make certain that the most up to date Service Pack from Microsoft is installed when using the Windows system Install the security updates provided by Microsoft on a regular basis 6 2 SwyxWare License During startup you input a temporary SwyxWare license For the validity period please refer to the start page of the SwyxWare Administration You will find the date of expiration behind the serial number of the server In the server properties on the Licenses tab you can create a request for a permanent license and either send this directly or save it as a file and send it later Please fill in the license request completely Error free license requests by e mail are processed automatically and your permanent license will be issued directly within a few minutes You then receive a file with a permanent license which you input in the SwyxWare Administration For further information please refer to the SwyxWare Administrator documentation gt SwyxExpress Backup and Restore 17 7
4. SwyxExpress Backup and Restore You can e back up and restore the delivery state of the complete hard disk Create USB Rescue Media e back up and restore the current state of the SwyxWare installation with configuration and user data Backup and Restore e restore the delivery state of the Windows operating system Restore Factory Default Normal Start sSsWw H eaw 7 1 Back up and Restore Delivery State of Hard Disk USB Rescue Media In the steps that follow you create a bootable image clone of the complete hard disk in the delivery state The image is created on an external USB storage medium The data capacity of the USB storage media must be at least 8 A gigabytes ge You schould create a USB Rescue Media before the step Windows Strartup The USB Rescue Media can also be created any time later on 18 gt SwyxExpress Backup and Restore z This is how you create USB rescue media 1 Restart the computer The startup screen will appear 2 Choose Create USB Rescue Media and confirm your selection with Enter 3 Connect the USB storage device to a USB port on the computer Wy Tt Press y to confirm you want to proceed Wye Press y if you want an automatic restart of the computer after the rescue media is created Wy 6 Press y to confirm formatting of the USB storage media Any possible data on the storage media will be lost The creation of th
5. provides the software based Unified Communication solutions of Swyx as a complete package Here you will find SwyxWare that has already been preinstalled on a suitable hardware platform The detailed documentation is stored in PDF form with a direct link on the desktop Once your licenses are released for use and customer specific parameters numbers etc have been configured SwyxExpress X20 is immediately available as a communication platform in your business SwyxExpress X20 is suitable for up to 20 users and 8 voice fax channels ape of supply e SwyxExpress X20 server hardware e Optional preinstalled QuadBRI SX 2 ISDN card PCle RAID 1 Controller PCle e Various cables a power cable optional ISDN cable e This user manual e Swyx End User License Agreement EULA e Swyx Standard Business Conditions e Microsoft license key label on the computer e The option SwyxWare SmartOffice includes the appropriate software licenses 1 SwyxWare Server basic license incl Voicemail and CTI 10 SwyxWare user licenses 1 SwyxMobile 1 SwyxFax user license 1 fax channel 2 voice channels 4 gt What is SwyxExpress X20 1 2 Installation Overview This documentation gives you an overview of the really essential steps for the configuration of SwyxExpress The complete SwyxWare DVD is stored on the hard disk and you will find a link to it on the desktop 1 Optional installation and configuring of t
6. 0 0 cece eeeeeee eee eeseeeeeeeeeeees 9 4 Installation of the ISDN card optional 0 00 10 4 1 Pre configuration of the SX2 ISDN Cards 10 4 1 1 Option Power supply in NT mode ee 11 4 2 Installation of the software for the ISDN card 11 4 2 1 Configuration of the SX2 QuadBRI for NT mode 12 5 Configuration of SwyxServer 0 0 0 0 eee 13 5 1 Initial Configuration of SwyxServet cee 13 5 2 Settings Of SwyxServer sesciscncidittantiaieaannicnsecsiioonss 14 5 21 Essential Setti gS ass sct ccdawcccctitevessselenteasigdeaasacedemnesyt 14 5 2 2 Further setting Secnuiidcnininsiian iin lis 14 Bed Installation of Swyxlt cis eiiersaed estan nacdstasinsasecdencuameaiveaapsin 15 5 4 Further Components like SwyxPhone SwyxDECT 800 i ced a whpneatnctnct onde thin ecient saute 15 6 LICEnsSiNg sic scanned catches nash i aai i a 16 6 1 Windows LicenSe seessesssseerinnneneeeeeerinrrnrrrnnnnnnnrrrrrrrrrnnn 16 6 2 SwyxWare License s sssssesisisisestsisisisrsrsrninisrntnnernrnrnennen 16 7 SwyxExpress Backup and Restore 0 cceeeeeeee 17 7 1 Back up and Restore Delivery State of Hard Disk USB Rescue Media 17 7 2 Back up and Restore SwyxWare Installation 19 7 3 Restore Factory Default for operating system 23 Indek cas aserchcosie shasta E A E 25 gt What is SwyxExpress X20 3 1 1 What is SwyxExpress X20 SwyxExpress X20
7. N lf necessary enter the computer name with the fully qualified DNS 7 e g Computername as FQDN computer 01 server net account is registered lf necessary enter the user name plus the domain where the user 7 e g Username domain user name server net gt 10 Specify a subdirectory for the network share use 7 E g Share subfolder Users Public Backup 8 Confirm all inputs with Enter The backup operation begins The backup may take considerable time the progress will be displayed When a copy of the backup file has been created this message appears Backup file successfully copied as Express_Backup_YYYYMMDDHHMiMiSS When creation is finished the message Process complete will appear 9 Ifyou did not select automatic restart of the computer Step 5 press Enter to restart the computer The local backup is overwritten If desired a copy of the backup file is created on the USB storage device or in the network directory This is how you restore a backed up SwyxWare installation 1 Restart the computer The startup screen will appear 2 Choose Backup and Restore and confirm your selection with Enter 22 gt SwyxExpress Backup and Restore For the recovery you can choose from the following options 2 Restore local Backup The local backup of the SwyxWare installation is restored 4 Select Backup from USB media and Restore A copy of the SwyxExpress
8. N NT mode Configuration in ISDN driv er 12 P Password 7 Deletion of the backup 23 Power supply to devices 11 S Scope of supply 3 Sending e mails 15 Server Settings 26 Necessary 14 MobileExtensionManager 15 Optional 14 Operator 15 Set up telephone connection 14 Wy SIP Voicemail 15 Enter parameters 14 Ww SIP Trunk 14 Windows Status Window Desktop link 9 Computer name and admin istrator password 7 SwyxDECT 800 15 a Initial operation 6 SwyxExpress X100 10 License 7 Swyxlt 15 a License conditions 7 SwyxPhone 15 Product key 7 SwyxWare Regional and Language Op tions 6 Windows License 16 Configuration Desktop link 9 SwyxWare administration Desktop link 9 SwyxWare CD Desktop link 9 SwyxWare documentation Desktop link 9 SwyxWare installation back up 20 restore 21 SwyxWare license 16 SX2 QuadBRI Feed module 11 Supply voltage in NT Mode 11 T Telephone 15 Trunk 14 U USB Rescue Media 17 User 14 Conference 15 Create 14 27 This page is intentionally left blank 28 This page is intentionally left blank
9. SWOR SwyxExpress X20 The complete solution for your corporate communications As of December 2011 2000 2011 Swyx All rights reserved Legal Information Whilst Swyx attempt to convey accurate and current information relative to the creation of SwyxWare and this documentation the information provided in this user guide may contain typographical or technical errors This documentation including all information contained herein is provided as is without any warranty of any kind whether expressed or implied including but not restricted to any implied warranties of merchantability or fitness for a particular purpose or non infringement Trademark Swyx and Swyxlt are registered trademarks of Swyx All other trademarks and product names are trademarks or registered trademarks of the respective owners This documentation is proprietary intellectual property of Swyx Reproduction adaptation or translation of this documentation without the express written consent of Swyx is prohibited and will be prosecuted as a violation of intellectual property rights Swyx Solutions AG Joseph von Fraunhofer Str 13a D 44227 Dortmund G SWO H Content 1 What is SwyxExpress X20 3 Tti SCOPEC OF SUPP scaninrioaiaaai naa 3 1 2 Installation OVervieW c ccceceeecceccceeneececeecnteeeeceentuteeeeeennats 4 2 Windows Startup c cece ees eeseeseeeeeneeeeeeeeeeeaseneeateans 6 3 Finding your way around 0
10. al Start The installation wizard will open 14 Press Ctrl Alt Del and enter the administrator password The desktop opens up with a number of links already created see chapter 3 Finding your way around page 9 Proceed with the configuration of the SwyxServer see chapter 5 Configuration of SwyxServer page 13 Please note that you have to activate the system at Microsoft within the following 3 days Please make certain that the most up to date Service Pack from Microsoft is installed when using the Windows system Install the security updates provided by Microsoft on a regular basis gt Finding your way around Oo Finding your way around You will find the server status System Information and Services listed directly on the SwyxExpress desktop Various links are also stored here v bal r E SwyxWare Documentation The PDF SwyxWare Administrator Documentation opens up E SwyxWare Configuration e Starts the SwyxWare Configuration Wizard see chapter 5 2 Settings of SwyxServer page 14 SwyxWare_ DVD Directory containing all files of the SwyxWare DVD gt e following links you wi SwyxWare Administration Il find on the desktop after installation Configures the SwyxServer s properties also users trunks etc Configures the properties of SwyxFax Server Status Window Reports on the SwyxServer s current activities D Chan
11. backup on the USB storage medium can be selected and restored 6 Select Backup from Network Share and Restore A copy of the SwyxExpress backup in the network directory can be selected and restored 0 Cancel The computer is restarted 3 Press the corresponding number key to select the option you want and confirm with Enter 4 Ifyou have selected option 4 connect the USB storage device with the backup files to a USB port on the computer We 5 Press y if you want an automatic restart of the computer after the recovery is completed 6 If you selected option 6 you will be asked for the computer name share name and the network login username and password Enter the necessary information domain name FQDN zx lf necessary enter the computer name with the fully qualified DNS i e g Computername as FQDN computer 01 server net account is registered ze if necessary enter the user name plus the domain where the user i J Username domain user name server net To specify a subdirectory for the network share use E g Share subfolder Users Public Backup 7 Confirm all inputs with Enter The list of backup files will appear gt SwyxExpress Backup and Restore 23 8 To select the backup file you want to use for the recovery press the corresponding number key 9 Confirm the selection with Enter 10 Enter the password ippbx to start the process and confirm wi
12. blic network The public numbers of the ISDN connection are also entered here e SIP Trunk for the connection to a SIP provider Here you enter the parameters you ve got from the provider User Shortcut menu JA user can initiate a telephone connection User Add A wizard asks for all necessary parameters User 5 2 2 Further settings Special users and groups are already created during installation For further information please refer to the SwyxWare Administrator documentation gt Configuration of SwyxServer 15 5 3 5 4 User User list Preset with the number 0 Operator User User list Assigned internal numbers each Conference represent a conference room User User list Manages the forwarding to mobile MobileExtens users ionManager Group Group list Contains all created users Everyone Group Sales Group list Preconfigured group Group Group list Preconfigured group Support Mail server In order for voicemails or faxes to be sent from SwyxWare a mail server is needed Configure the mail server to be used under Server Properties Mail Server Installation of Swyxit Other SwyxWare components such as SwyxIt inclusive SwyxFax Client are not preinstalled You can find these via the desktop link SwyxWare DVD Further Components like SwyxPhone SwyxDECT 800 SwyxWare offers a range of other hardware components which you can install in your network
13. e USB rescue media is begun and may take considerable time The progress will be displayed When creation is finished the message Creation of USB rescue media succeeded will appear 7 Withdraw the USB connector of the storage media from the USB port on the computer means of restoring SwyxExpress locally on a new disk when a hard Keep the created USB rescue media in a safe place It is the only disk is defective 8 If you did not select automatic restart of the computer Step 5 press Enter to restart the computer The USB rescue media is created x this is how you restore the delivery state of the hard disk with the USB P rescue media Install the hard disk on which you want to restore the delivery state of SwyxExpress 2 Change the order of the boot devices in the BIOS setup so that the USB device option is listed first 3 Connect the USB rescue media to a USB port on the computer gt SwyxExpress Backup and Restore 19 4 Restart the computer A message appears Restoring delivery state of hard disk Do you want to proceed Whey tt 5 Press y to confirm you want to proceed 6 Press y if you want an automatic restart of the computer after the recovery We 7 Press y to confirm you want to proceed gA All data on the hard disk will be lost The restore is begun and may take considerable time When the operation is finished this message appears Hard disk restored successful
14. et ON e 3V PCI bus power supply The card is set to a 3V power supply jumper 3V3 reg to the left e Automatic assignment of card number The card is configured for automatic card number assignment This means that the DIP switches 1 2 3 and 4 are in the OFF position gt Installation of the ISDN card optional 11 If the ISDN connection is to be used for an external subsystem or the card number should be specified the card must be removed and reconfigured For detailed information on the cable assignment please see the SwyxWare Administrator Documentation chapter ISDN Connections 4 1 1 Option Power supply in NT mode 4 2 ISDN devices which are intended for supply from the public line can also be connected to a SX2 QuadBRI which operates in NT mode Swyx offers an internal or external feed module as an additional component for this The feed module is attached to the SX2 QuadBRI in NT mode For further information on the SX2 QuadBRI please refer to the SwyxWare administrator documentation Installation of the software for the ISDN card After the initial startup the drivers for the ISDN cards are installed This installation takes place automatically in background and no further parameters are requested After the installation all SX2 cards present are created as individual network cards in the computer management In the default setting the card drivers are configured for a multiple subscriber co
15. he RAID controller If your system is equipped with a RAID controller please install the supplied drivers and software tools You will find the installation package in the folder CADrivers RaidController 3Ware_xxxxx Furthermore you may find the latest drivers and configuration tools on the internet pages of the original manufacturer http 3ware com support downloadpage asp http 3ware com support userdocs asp 2 Optionally configuration of the SX2 ISDN cards If your system is equipped with an ISDN card and you wish to change the standard settings Chapter 4 2 Installation of the software for the ISDN card page 11 please remove the ISDN card now and configure it for your circumstances The driver of the ISDN card will be installed silently during the SwyxExpress installation For further information please refer to chapter 4 Installation of the ISDN card optional page 10 3 Windows setup Enter the Windows license label on the case and the customer specific data such as time zone administrator password as well as the keyboard layout For further information please refer to chapter 2 Windows Startup page 6 gt What is SwyxExpress X20 5 4 SwyxWare Configuration Start the configuration of SwyxServer from the desktop link The SQL database server will be installed automatically Further entries are not required The SwyxWare Configuration Wizard will be started Here you enter specific data such as locat
16. ion public numbers etc For further information please refer to chapter 5 Configuration of SwyxServer page 13 5 SwyxWare Administration Start the administration from the desktop link After the SwyxWare is configured you can create users and trunks For further information please refer to chapter 5 2 1 Essential settings page 14 6 SwyxIt and SwyxPhone For further information please refer to chapter 5 3 Installation of SwyxIt page 15 Please see the SwyxWare administrator manual for how to install the telephony clients this is available as a link on the desktop 6 gt Windows Startup 2 Windows Startup Now you start the operating system Microsoft Windows Server 2008 R2 Please have your Windows Server 2008 R2 license ready You will find At license key on the label on the computer case gt This is how you start Windows Server 2008 R2 On delivery the computer is also configured for remote access 1 You should attach the screen network cable mouse and keyboard before the initial startup 2 Start the computer The startup screen will appear Normal Start Ssw H 3 Select Normal Start After a few minutes the window Configure Windows will appear 4 Regional and Language Options Select the regional options such as country region time and currency as well as the keyboard layout Click on Next gt Windows Startup 7 5 Product key Enter the product key You wi
17. ll find the product key directly on the label on the computer case Click on Next The license conditions are displayed 6 License conditions Activate the checkbox I accept the license conditions and click on Start 7 Computer name and administrator password Set the administrator password and enter the new password a second time to confirm it Please note the following criteria for entering a secure password A A password should have at least eight letters Use upper and lower case as well as digits and or non alphanumeric characters Click on OK You will be reminded that you changed the password Click on OK The desktop will be prepared this may take several minutes 8 Then you will be asked to change the computer name This message will appear every time you restart the computer until you changed the computer name Click on Yes The window System Properties will open 9 Click within the tab Computer name on Change and change the computer name Enter also the workgroup or the name of the domain Confirm the entries with OK A gt Windows Startup 10 The computer must be restarted in order for the changes to go into effect Click on OK 11 Click on Close to close the System Properties window 12 Confirm the restart by clicking on Restart now The computer is then restarted and the startup screen will appear 13 Select Norm
18. ly to delivery state Do not disconnect the USB rescue media until the computer restart has begun 8 Restart the computer 9 Afterwards you can restore the SwyxWare installation see chapter 7 2 Back up and Restore SwyxWare Installation page 19 7 2 Back up and Restore SwyxWare Installation After you have installed SwyxWare and configured it for your needs you can back up the complete installation The backup saves not just the database which contains most of the parameters but the complete Windows partition including the operating system configuration Copies of the backup files can be stored on an external storage medium or in the network The backup should be done at regular intervals of time so that there are always multiple system snapshots available for recovery Depending on the SwyxWare configuration a copy of the backup file A can amount to several gigabytes Make sure there is enough memory space on the USB storage medium or the network drive ze Each copy of the backup file is stored under a unique name which 7 contains the date and time of creation 20 gt SwyxExpress Backup and Restore Express_Backup_YYYYMMDDHHMiMiSS gzaa Y year M month D day H hours Mi minutes S seconds Alternatively the unconfigured delivery state can be restored see chapter 7 3 Restore Factory Default for operating system page 23 gt _ this is how you back up your SwyxWare installation
19. nel Monitor Checks the function of the ISDN boards For further information please refer to the SwyxWare Administrator documentation 10 gt Installation of the ISDN card optional 4 Installation of the ISDN card optional SwyxExpress X20 can optionally be equipped with a SX2 QuadBRI ISDN card This chapter concerns only the SwyxExpress X20 equipped with an 7 ISDN card 4 1 Pre configuration of the SX2 ISDN Cards The SX2 ISDN card has been configured to the default settings before being inserted in the computer with the help of the jumpers and DIP switches If these settings do not correspond to the configuration you need you will have to alter them To do this you must shut down the system and disconnect it from the power supply You can then configure the cards according to the directions in the SwyxWare Administrator Documentation chapter ISDN Connections The operating mode TE NT and the bus termination must be configured for each line of the SX2 QuadBRI before insertion If SwyxExpress is equipped with an SX2 QuadBRI it is configured for TE mode and the termination is active The card has the following default settings e TE mode for all connections This mode is suitable for connecting the ISDN connection directly to an NTBA or configuring the SwyxWare as a subsystem e 100 ohm termination of all connections The 100 ohm termination is switched on both corresponding DIP switches are s
20. nnection This configuration is typical for an SX2 QuadBRI You can check whether the installed ISDN cards function properly by using the supplied utilities For further information please refer to the SwyxWare Administrator Documentation Appendix Tools amp Traces If you want to change configuration parameters of the SX2 card you can find the properties of the card in the computer management under Computer Properties Device Manager Network adapters lt SX2 card gt For further information please refer to the SwyxWare Administrator documentation 12 gt Installation of the ISDN card optional 4 2 1 Configuration of the SX2 QuadBRI for NT mode If you want to operate the SX2 QuadBRI card in NT mode e g with a subsystem the NT mode must also be configured in the properties of the card configured before insertion To find out how the card in your SwyxExpress X20 variant is pre configured please refer to Chapter 4 1 Pre configuration of the SX2 ISDN Cards page 10 Note that the jumpers on the card must also be appropriately For detailed information on the cable assignment please see the SwyxWare Administrator Documentation chapter ISDN Connections gt _ This is how you configure the ISDN driver for NT mode 1 Open the properties of the card in the computer management under Computer Properties Device Manager Network adapters lt SX2 card gt Enter the appropriate settings under Pro
21. ormation about the required parameters you will find in the SwyxWare administrator documentation chapter 3 4 2 Configure SwyxWare which you can open via the desktop link Then before startup please create users and trunks For further information please refer to chapter5 2 Settings of SwyxServer page 14 Please have the SwyxWare licenses ready They will be required during A the configuration Zw The option SwyxWare SmartOffice includes the software licenses in CE other cases you should order them additionally 14 gt Configuration of SwyxServer 5 2 Settings of SwyxServer To enable the operation of SwyxWare further customer specific settings must be selected after the initial configuration Start the SwyxWare Administration from the desktop link for this For further information please refer to the SwyxWare Administrator documentation What follows here is purely a brief overview of the necessary settings after which at least a first test operation is possible and then a summary of further possible settings 5 2 1 Essential settings The following parameters must be configured before the initial operation Calls are subsequently possible from a created user to the public telephone network For further information please refer to the SwyxWare Administrator documentation Trunk Shortcut menu JA trunk is the connection to the outside Trunks Add world Trunk e ISDN Trunk for the connection to the pu
22. perties Select ISDN Parameters on the Advanced tab Select the Port tab in the dialog which is displayed oe eS To switch to operation in NT mode please choose NT side and close both this tab and the previous tab by clicking on OK at gt Configuration of SwyxServer 13 5 Configuration of SwyxServer SwyxExpress already contains a pre installed SwyxServer version and the associated database After the startup of the operating system see chapter 2 Windows Startup page6 and the installation of the ISDN card drivers see chapter 4 Installation of the ISDN card optional page 10 the configuration and licensing can now take place in the SwyxWare Administration 5 1 Initial Configuration of SwyxServer Start the SwyxWare from the desktop link You will find detailed information about the Configuration Wizard in Chapter 3 4 2 Configure SwyxWare page 117 By clicking on the desktop link SwyxWare configuration you will start a script Due to administration rights the user account control asked you to confirm the execution of the script The SQL database server will be installed automatically The wizard guides you through the configuration of SwyxServer asking you for all necessary parameters such as location and licenses Please confirm the default parameter of the wizard Mostly you don t need a domain account for SwyxServer so please let the wizard create a local account Further inf
23. th Enter All the configuration and user data of the current system including the local backup will be deleted when the delivery state is restored The backup file will be copied on to the SwyxExpress computer The SwyxWare installation is being recovered 11 If you did not select automatic restart of the computer Step 5 press Enter to restart the computer The Windows operating system is returned to the state it was in when the backup copy used for the recovery was created 7 3 Restore Factory Default for operating system You can reset the Windows operating system to the factory default The complete Windows partition is overwritten in the process state it will be necessary to begin with the startup of the Windows When the computer is started up again after the reset to the delivery operating system see chapter 2 Windows Startup page 6 Make regular copies of the backup files on external storage media so that you can always restore the operating system snapshot of your choice see chapter 7 2 Back up and Restore SwyxWare Installation page 19 xs This is how you restore the delivery state 1 Restart the computer The startup screen will appear 2 Choose Restore Factory Default 3 Press y to confirm you want to proceed 4 If there is a local backup you will be asked whether you want to delete the backup too e Ifthe existing backup is deleted the system is returned to the original delivery state
Download Pdf Manuals
Related Search