DJ-User Manual 141211
Contents
1. Low or no volume e Make sure the audio source is on and the volume is turned up e Make sure the headphone volume is turned up e Reconnect the headphone and the music source e Check the audio cable if it is defective and replace the audio cable LEDs are not light up e Make sure the battery is not of power Sound is only coming from one earpiece e Disconnect and re connect the headphones to ensure the connection is secure Try another audio source e e Make sure the audio cable is properly connected e Check the audio cable if it is defective and replace the audio cable Headphone cannot be switched on e Make sure the battery is not out of power 10 cleer 2014 Cleer Limited gt All rights reserved ro http www cleer us2. Register your product and get support at www cleer us User Manual EN User Manual 1 ES Manual del usuario 11 FR Manuel de l utilisateur 21 cleer Contents 1 Important Hearing Safety Notice Trademark notice A ON 2 Your headset What s in the box Overview of your headset 3 Get started Charge your headset 4 Use your headset Adjust the locking hinge mechanism Wear your headset Connect and get listening Manage your music and calls Folding and storing the headphone Change your ear pads oo Oo 01 UI 5 Specification 6 Trouble shooting 3 1 Important Hearing safety Listening at a moderate volume e Using headphones at a high volume can impair your hearing This product can produce sounds in decibel ranges that may cause hearing loss for a normal person even for exposure less than a minute The higher decibel ranges are offered for those that may have already experienced some hearing loss e Sound can be deceiving Over time your hearing comfort level adapts to higher volumes of sound So after prolonged listening what sounds normal can actually be loud and harmful to your hearing To guard against this set your volume to a safe level before your hearing adapts and leave it there English To establish a safe volume level e Set your volume control at a low setting Slowly increase the sound until you can hear it comfortably and clearly without distorti
3. Volume down amp Microphone Compatible with most Android Compatible with apple devices devices iPhone iPod iPad Notes Functions vary depending on your phones tablets and application The remote and mic are supported only by iPod nano 4th generation or later iPod classic 120GB 160GB iPod touch 2nd generation or later iPhone 3GS or later and iPad The remote is supported by iPod shuffle 3rd generation or later Audio is supported by all iPod models and iPad Basic function Call related function Media playback function Le C4 D LI English Folding and storing the headphone Rotate the earcups inwards then place the headphones in the hard carrying case Notes The earcups rotate only in one direction Incorrectly rotating the earcups can damage the headphones Change your earpads Remove the ear pads from both ear Lift the ear pads off the ear cups cups by turning the ear pads in the direction of the arrow 5 Specifications Sensitivity 105dB Speaker driver 50mm _Magnettype Neodymium S Distortion lt 1 THD IEC3181mW 1KHz Museen me ie EE Battery charging time 3 hours Battery pe Liu ion polymer Audio connection 3 5mm stereo jack socket Dimensions WxHxD 165x195x80mm Weight 0 335kg Note Product information is subject to change without prior notice s 2 mi English 6 Trouble shooting
4. ed out wheel bin symbol with the chemical symbol Pb it means that the batteries comply with the requirement set by the directive for lead Compliance with FCC rules U S A only This device complies with Part 15 of the FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause understand operation FCC WARNING e Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment Proper connections must be used for connection to a host computer and or peripherals in order to meet FCC emission limits Trademark notice Made for BliPod iPhone iPad Made for iPod Made for iPhone and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod iPhone or iPad respectively and has been certified by the developer to meet Apple performance standards Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards iPad iPhone iPod iPod classic iPod nano iPod shuffle and iPod touch are trademarks of Apple Inc registered in the U S and other countries Android is a trademark of Google Inc Trademark are the property of Cleer Limi
5. on Listen for reasonable periods of time e Prolonged exposure to sound even at normally safe levels can also cause hearing loss e Be sure to use your equipment reasonably and take appropriate breaks Be sure to observe the following guidelines when using your headphones e Listen at reasonable volumes for reasonable periods of time Be careful not to adjust the volume as your hearing adapts e Do not turn up the volume so high that you can t hear what s around you You should use caution or temporarily discontinue use in potentially hazardous situations Do not use headphones while operating a motorized vehicle cycling skateboarding etc it may create a traffic hazard and is illegal in many areas Notice Recycing Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Your EE P oduct contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste When you see the cross
6. on listening music with an audio cable English 4 Use your headset Adjust the locking hinge mechanism For good sound quality and best possible comfort the headband has to be adjusted to properly fit your head To do so adjust the headband via its snap in locking mechanism e Rotate the earcups inwards e Turn the knob to adjust the locking hinge Wear your headset Place headset on your ears by matching the L R markers to your ears accordingly e Adjust the length of the headband so that your ears are completely inside the ear pads Connect and get listening Connect the supplied audio cable to the headphone socket either on the left or right ear cupand the L plug to your sound source such as MP3 PC CD player etc Notes No battery power is required for the headset when you use it with audio cable if the plug on the audio cable is too small for the headphone socket on your sound source plug the 3 5mm to 6 3mm adaptor onto the audio cable Manage your music and calls The audio cable is combined remote control and microphone that enables you to make or answer calls while wearing the headphones The control also enables you to play pause and skip songs Select the type of inline remote control pu Play pause M Replay the track Previous track n O M Next track 1x ru E Answer MA O 2x 3x M amp End call e ta ta Volume up za
7. ted or their respective owners The making of unauthorized copies of copy protected material including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes English 2 Your headset What s in the box You should find these items upon opening the box Hard carrying case USB charging cable Two audio cable with inline remote control 1 2m DJ cord cable 1 2m 3 5 6 5mm adaptor User manual Quick start guide Warranty card Acoustic Certificate Overview of the headset Mono stereo switch PASC on off switch Micro USB jack for charging 3 5mm audio jack LED light on off button PASC on off LED indicator gt LED turns blue flash light when the PASC is turned on DIRNS OE OO 3 Get started Charge your headset Connect the supplied USB charging cable to e the USB connector of the headset and e USB power source gt LED turns red light during charging and turns blue light when the headset is fully charge gt LED turns red flash light during low battery Notes Before you use your headset for the first time charge the battery for 3 hours for optimum battery capacity and lifetime Use only the supplied USB charging cable to avoid any damage You can operate the headset normally during charging When the battery is empty you can carry
Download Pdf Manuals
Related Search