User Manual - B&H Photo Video Digital Cameras, Photography
Contents
1. 1 Please visit www removu com firmware page to download the latest firmware 2 Download the firmware file and unzip the file on your PC or Mac 3 Turn on the REMOVU P1 Nee REMOVU root copy ff r1_ooo bin rv_coc img 4 When Select Camera Network list appears on the REMOVU screen connect the device to your PC or Mac using the USB cable included in the package 5 Copy and paste the firmware files to the root of REMOVU storage drive 6 When the files are successfully copied into the root of REMOVU disconnect the device from your PC or Mac REMOVU 7 Restart your REMOVU 8 The REMOVU logo will appear then upgrade will begin 9 You are ready to go extreme with the latest firmware 21 6 Product Specification Display Video Streaming Wi Fi Antenna Power and Battery Interface Weight and Dimensions Available Camera Certificates Not built in using GoPro LCD Touch BacPac GoPro LCD Touch BacPac is not included HLS 432x240 30fps IEEE 802 11b g n Distance 20m 60m Max Well designed built in PCB antenna 2 5 hours of continuous video streaming Built in Rechargeable Li polymer Battery 1 050mA Micro USB Charging amp F W update Height 2 0 inches 52 mm Width 2 8 inches 72 mm Depth 1 0 inches 26 mm Weight appx 2 1 ounces 60 grams without LCD Touch BacPac weight GoPro HERO3 HERO3 amp HERO42. CE FCC KC ROHS 22 7 Trouble Shooting Guide 1 If No firmware to update message appears after firmware update Solution Connect your device to a PC and delete all files stored in the storage Then copy the bin firmware file to the memory and reboot 2 If Low firmware versions message appears after firmware update Solution Connect your device to a PC and delete all files in the storage Reboot to check the version of the firmware 3 If you can t see your on the camera network list Solution In order to establish Wi Fi connection between P1 and GoPro the GoPro needs to have its SSID The SSID can be generated through the GoPro App Before using with P1 please establish connection between GoPro HERO4 and GoPro App to generate the SSID 4 If the diplay gets darker or backlight goes off Solution It means that the battery is running low so please recharge the device 5 If your device freezes while using Solution Press the reset button located next to the charging port If the problem persists please constact customer support 6 If the device does not boot or shuts down automatically while booting Solution Please connect your device to your PC and have all files deleted in the storage If there aren t any files please contact customer support 23 8 Warranty Information Essel t Co LTD essel t warrants that essel t s devices and accessories Products are free from
3. REMOVU Turn your GoPro LCD Touch BacPac into a Wi Fi Live Viewer USER MANUAL Table of Contents 1 Understanding This User Manual 2 Product Components and Features 3 Using REMOVU P1 Charging the Battery How to Assemble Turning Your Device On and OFF Wi Fi Connection Connecting Your GoPro for the first time HERO3 3 Wi Fi Connection Connecting Your GoPro for the first time HERO4 Wi Fi Connection Connection Failure Reconnect LCD Screen Indicators Navigating Your Device Controlling GoPro Power On Off 4 1 Modes and Settings HERO3 3 Series 4 2 Modes and Settings HERO4 Series 5 Firmware Upgrade 6 Product Specification 7 Trouble Shooting Guide 8 Warranty Information 13 18 21 22 23 24 1 Understanding This User Manual Thank you for purchasing our Wireless GoPro Live Viewing Device REMOVU P1 hereinafter referred to as P1 This Operator s Guide describes how to handle and operate the P1 Before using the P1 be sure to read this manual thoroughly for proper operation To enhance the performance of the product the contents of this instruction manual may be changed without prior notice 1 In accordance with Personal Information Security Law amp related legislation essel t Co Ltd will not be held responsible for any problem due to illegal use of this product 2 Any defects or damage resulting from accident misuse abnormal use abnormal conditions and imp
4. charged with a USB power adapter Adaptor s not included We recommend using GoPro or Apple iphone adaptors yy DDA GoPro LCD P1 Cover Touch BacPac P1 Body 1 Open the cover and detach it from the body 2 Place the LCD Bacpac into the slot as below 3 Attach the cover and lock the clamp Turning it on 1 Press the M Mode Power button for about 1 second to turn on the power REMOVU 2 The REMOVU logo will appear After short loading Wi Fi network list will pop up Turning it off 1 Press the M Mode Power button for about 2 seconds to turn off the device REMOVU Power off logo will appear then the device will be turned off with the red LED blinking three times BOTH POWER OFF 2 If no input is made for 30 seconds in the Live View Mode the screen will shut off to save power REMOVU POWER OFF HERO3 3 Users HERO3 3 Wi Fi SSID and Password setup 1 Go to GoPro support page on GoPro Website to upgrade your GoPro Camera to the latest firm www gopro com ware version support 2 While upgrading you will be asked to set up Wi Fi SSID Password Please make sure to remember your password and SSID Connecting your GoPro HERO3 3 to REMOVU 1 Please go to the GoPro App settings menu on your HERO3 3 to turn on the Wi Fi function 2 Turn on your REMOVU P1 3 When the Select Camera Network Screen appears se
5. defects in material and workmanship under normal use and service for the period commencing upon the date of purchase by the first consumer purchaser and continuing for 1 year period of time after that date This Limited Warranty is conditioned upon proper use of Product by Purchaser This Limited Warranty does not cover a Defects or damage resulting from accident misuse abnormal use abnormal conditions improper storage exposure to liquid moisture dampness sand or dirt neglect or unusual physical electrical or electromechanical stress b Scratches dents and cosmetic damage unless caused by essel t c Defects or damage resulting from excessive force or use of a metallic object when pressing on a touch screen d Equipment that has the serial number or the enhancement data code removed defaced damaged altered or made illegible e Ordinary wear and tear f Defects or damage resulting from the use of Product in conjunction or connec tion with accessories products or ancillary peripheral equipment not furnished or approved by essel t g Defects or damage resulting from improper testing operation maintenance installation service or adjustment not furnished or approved by essel t h Defects or damage resulting from external causes such as collision with an object fire flooding dirt windstorm lightning earthquake exposure to weather conditions theft blown fuse or improper use of any electrical sou
6. e it back to single Photo capture mode 1 BURST PHOTO OPTIONS Burst Photo mode captures a series of Photos when the REC Shutter Select Button is pressed Photos can be captured at the following rates 3 photos in 1 second 5 photos in 1 second 10 photos in 1 second 10 photos in 2 seconds 30 photos in 1 second 30 photos in 2 seconds 30 photos in 3 seconds Tips The options may vary across different models CH TIME LAPSE SETTINGS Several time interval options are available for Time Lapse mode including 0 5 1 2 5 10 30 and 60 seconds Additional Note The sub menus are structured identical to GoPro Please refer to GoPro manual for details REMOVU s Back buttons works the same way as GoPro s Exit button The options may vary across different models 17 4 2 Modes and Settings HERO4 Series Go a NS Oo E VIDEO PHOTO MULTI CAMERA PLAYBACK REMOVU SHOT SETTINGS SETTINGS VIDEO SINGLE BURST VIDEO TOUCH PHOTO PHOTO SETTING DISPLAY N VIDEO CONTINUOUS TIME PHOTO Wi Fi PHOTO PHOTO LAPSE SETTING NETWORK E LOOPING NIGHT NIGHT MULTI SYSTEM PHOTO LAPSE SETTING INFO Please select the mode using the touch screen menu or M Mode Power button to navigate across different modes CK VIDEO Record Video PHOTO Capture a single Photo MULTI SHOT Capture a series of photos Time Lapse Burst etc SETTINGS Adjust general camera settings 18 Please selec
7. in one second Capture a series of Photos at timed intervals Adjust camera Settings 13 CX VIDEO To record video please swipe from right to left or tap the arrow on the right side of the screen or using the M button on the side of the device to change modes Video icon appears at the top left corner of the Live View OSD To start recording Press the REC Shutter Select button The red LED Lights will flash while recording To stop recording Press the REC Shutter Select Button while recording The red LED light will flash three times and stops recording Tips The Live View may not work some resolution settings When you start recording in resolutions that are not supported the message PREVIEW NOT SUPPORTED will appear on the screen When you stop recording the live view will be displayed again f PHOTO To capture a Photo select the photo mode on the touch screen or press the M button repeatedly until the Photo icon appears at the top left corner of the Live View OSD To take a photo Press and release the REC Shutter Select Button The red Camera Status Lights flash when photos are taken 1 BURST PHOTO In Burst Photo mode your camera takes multiple photos in short time intervals Please select the mode using the touch screen menu or press the M button repeat edly until the photo icon appears at the top left corner of the Live View OSD To take a burst photo Press the REC Shutter Se
8. just the interval 15 Ee VIDEO RESOLUTION FPS FOV MODES The Resolution fps frames per second and FOV field of view can be changed in the Video mode menu You can also turn Auto Low Light mode ON OFF To change Video Mode settings 1 Press the REC Shutter Select Button to enter H VIDEO RESOLUTION FPS FOV MODES 2 Use the M Mode Power to navigate through options or by touch Press the REC Shutter Select button to enter desired menu 4 Use the M Mode Power Button to cycle through each sub menu option and the REC Shutter Select button to select it 5 To change additional options repeat step 4 6 When all settings are adjusted press the Back button to exit WwW Note The modes may vary across different models E PHOTO RESOLUTION SETTINGS The photo resolution can be adjusted here The changes are applied to Photo Photo Burst Time Lapse modes Photo Resolution Field of View FOV 12MP Wide 7MP Wide 7MP Medium 5MP Medium Note The options may vary across different models 16 O CONTINUOUS PHOTO Continuous Photo mode allows you to capture a series of 3 Photos by pressing the REC Shutter Select button Speed Options SINGLE Takes 3 photos in 1 second Takes 3 photos at speed of 5 photos sec Takes 3 photos at speed of 10 photos sec Tips Your camera will remain in Continuous Photo mode until you chang
9. lect Button The red Camera Status Lights flash and the camera captures photos multiple times Available interval options 3 photos 1 second 5 photos 1 second 10 photos 2seconds 30 photos 1 sec ond 30 photos 2 seconds or 30 photos 3 seconds Tips Sometimes 30 photos 1 second can be too fast Try a slower BURST PHOTO setting to get better results 14 CH TIME LAPSE Time Lapse mode automatically captures a series of photos at 0 5 1 2 5 10 30 or 60 second intervals To capture a Time Lapse series select the photo mode on the touch screen or please press the M button repeatedly until the Time Lapse icon appears at the top left corner of the Live View OSD To take time lapse photos Press the REC Shutter Select Button The camera initiates countdown and the red Camera Status Lights flash each time a Photo is taken To stop time lapse photos Press the REC Shutter Select Button The red Camera Status Lights flash three times to indicate that Time Lapse has stopped The camera settings can be adjusted in the Setting Mode Please navigate to the Set tings mode using the touch menu or pressing M Mode Power button repeatedly until above screen appears Settings Menu VIDEO RESOLUTION Adjust the video resolution E PHOTO RESOLUTION Adjust the photo resolution sO CONTINUOUS PHOTO Adjust the number of shots BURST PHOTO Adjust the speed Citas TIME LAPSE Ad
10. lect your GoPro s SSID which you have created Select H Move Down ESC Previous Menu Bax Select Move Right ESC Previous Menu 5 You will see Blue LED light when the connection is successfully established HERO4 Users HERO4 Wi Fi SSID and Password setup 1 Install the GoPro App on your Smartphone o 2 Go to your GoPro 4 Setup Wireless select GoPro App 6 digit Pin number will appear 3 Open the GoPro App and connect your GoPro Camera 4 Enter the 6 digit Pin number that the GoPro Cam era is showing 5 Create the SSID and Password for your Camera 6 After the connection is established shut down the App Connecting your GoPro HERO4 to REMOVU 1 Turn on your HERO4 camera and go to HERO4 Setup RC amp App gt Select Exist ing to turn on the Wi Fi function gt WIFIRC amp GoPro App Back gt Wireless eA Setup Wireless Wi Fi RC amp APP Existing Touch Display Wi Fi RC amp GoPro APP Pair New GoPro App 2 Turn on your REMOVU 3 Select the SSID you generated from the Select Camera Network list 4 Enter the password you created 5 The Blue LED will turn on when the connection is established successfully 1 Flashing red LED and Wi Fi Network Not Connected message will appear if Wi Fi fails to connect or lose its signal 2 Type in your password again and try reconnecting the device 3 If
11. rce i The battery has been charged by a battery charger not specified or approved by essel t for charging the battery 24 For more information please visit our website at www removu com and find out everything regarding our product For additional assistance or questions regarding the product please contact our C S center or the place of purchase We will try our best to provide you with the highest possible standard of service REMOVU GET THE SHOT www removu com REMOVU by essel t co Itd Copyright 2015 essel t co Itd All Rights Reserved Patents Pending REMOVU is a trademark of essel t co Itd registered in the U S and other countries GoPro is a trademark of GoPro Inc registered in the U S and other countries 25
12. roper storage will not be covered by the warranty 3 The warranty shall cover a period of 1 year Please refer to Pg 24 for more details 4 Use only a dry soft cloth or clean wipe when cleaning the LCD panel surface Do not use other cleaning substances It may cause discoloration or damage to the surface of the product 5 Keep away from children and pets Store your devices out of the reach of children 6 REMOVU is the registered trademark of essel t Co Ltd essel t Co Ltd reserves the rights regarding all works related to the REMOVU brand such as product de sign trademarks and product promotional videos It is prohibited to reproduce copy modify or use related works without permission Any violation may be penalized in accordance with the relevant regulations 7 GoPro HERO the GoPro logo and the GoPro Be a HERO logo are trademarks or registered trademarks of GoPro Inc 2 Product Components and Features Please make sure your package includes all of the following items OOSE SET WRISTBAND USB CABLE QUICK GUIDE 1 Shutter Select 5 Charging Status LED 2 Power Mode Next 6 Reset 3 ESC Previous 7 USB Connector 4 Status LED 3 Using the REMOVU P1 The battery should be fully charged before using P1 the first time 1 Connect the device to a computer USB port using the micro USB Ee Dam cable included in the package 2 P1 can also be
13. s are illustrated below Swipe Left ae Displa i play Camera lt a Modes Cd Swipe Up w Camera A i Mode Je Settings i SwipeRight _ Playback i Mode a gt Je mas Swipe Down A REMOVU gt iO Modes Je vA H Select Move Right ESC H Select H Move Down FESC H Select Move Right a Men e fx ESC 0007 Select H Move Right m ESC 1080 60 W 11 Press and hold the M button for about 2 seconds until Power control menu appears You will be given 3 options to chose from REMOVU Power Button Turns On Off REMOVU GoPro Power Button Turns On Off GoPro Power Button for both Turns of both devices The RED triangle at the top right corner of the but tons indicate that the device is turned on Note Because of GoPro camera s protocol the connection between REM OVU and GoPro may get disconnected when either devices are turned off This function will not be available when the connection is lost 12 4 1 Modes and Settings HERO3 3 Series VIDEO PHOTO VIDEO PHOTO RESOLUTION RESOLUTION v TOUCH Wi Fi DISPLAY NETWORK CK VIDEO PHOTO i BURST PHOTO Cis TIME LAPSE SETTINGS BEN amp BURST TIME CAMERA PLAYBACK REMOVU PHOTO LAPSE SETTINGS SETTINGS Eo g CONTINUOUS BURST TIME PHOTO PHOTO LAPSE SYSTEM INFO Record Video Capture a single Photo Capture up to 30 Photos
14. t the mode using the touch screen menu or long press REC Shutter Select button while in the desired Camara Mode to change the capture mode in the order listed of above CX VIDEO MODE Video Video Photo mle p Looping a Ei EI a PHOTO MODE Single Photo Continuous Photos Night Photo HOG Captures video Simultaneously captures both video and photos You can set the camera to capture a photo at selected intervals while you record video For details see Video Photo Intervals in this section Lets you continuously record and save only the best mo ments which helps to conserve space on your microSD card You must select an interval Captures single photo Captures multiple photos continously Captures single photo in low light environments 19 1 MULTI SHOT MODE Burst Crn Time Lapse Ca Night Lapse Captures up to 30 photos in 1 second Perfect for capturing the definitive moment in fast action sports Captures a series of photos at specified intervals You can use Time Lapse to capture photos of any activity so you can choose the best ones later Captures a series of photos at specific intervals and ex posure times Use Night Lapse in low light environments such as when capturing the night sky over a period of time For available exposure times and examples of when to use them see Shutter in Mult Shot Settings 20 5 Firmware Upgrade Www removu com pn firmware
15. the connection is restored blue LED will flash and the Live View will appear 4 When reusing the device P1 will try to connect to last device it was connected to using the information saved from previous use 5 Switching between different cameras can be done in the Settings mode Cam era Network menu Please choose the camera you wish to switch to Tips When the Wi Fi signal gets weaker it may cause lags or the screen may not display the screen CX 00 00 00 01 45 00 T 1 Camera Modes FOV Indicator 5 GoPro Battery Life 2 Saved Image Video Counter 6 Resolution FPS 3 Remaining Recordable Hours 7 P1 Battery Life Humber OrPNOLOS Coun 8 Shooting Mode Indicator 4 Wi Fi Signal Strength Indicator To Adjust Settings The settings can be adjusted in the Setting Mode Please navigate to the settings mode using the M Mode Power button and enter the menu by pressing the REC Shutter Select button The list of the settings are z TOUCH DISPLAY It adjust your REMOVU display settings Wi Fi NETWORK It lists the available Wi Fi network you can connect to SYSTEM INFO It displays the general information of the device 10 After the device is powered on and Wi Fi connection is established it goes into the Live View mode automatically From there you can simply navigate through different functions using the Back button or the touch screen The order of appearance of the function
Download Pdf Manuals
Related Search